How to order polyurethane stucco and wooden decor online

You've already spent an hour on the catalog. Found moldings you liked. Added them to the cart. Cursor hovering over the 'Pay' button.

Stop.

It's at this point — a second before confirming the order — that most mistakes happen, which later cost money, nerves, and rework. Forgotten glue. Incorrect linear footage calculation. A molding that looks great on screen but in reality turns out to be twice as wide as needed. Wooden handles without specifying the center-to-center distance.

This article is not an online store review or a superficial 'check the sizes' tip. It's a detailed checklist for those who order polyurethane molding и Wooden decoration online and want to get exactly what they envisioned — without extra payments and without returns.

We'll go through each item. Step by step. Professionally.

Polyurethane Decoration MPU-002

from 124.80 $

Turned leg with polyurethane decoration MN-152

from 26.07 $

Wooden cornice K-095

from 4.95 $

● Universality. The wooden trim K-017 is suitable for any style and room, whether it's a living room, bedroom, office, kitchen, bathroom, or hallway. The wooden trim K-017 can be used for various purposes and tasks, such as framing, cladding, decorating, or zoning. The wooden trim K-017 easily complements other decorative elements, creating a harmonious and cohesive look.

from 19.31 $

Wooden Barge K-017

from 2.29 $

Wooden molding K-034

from 2.41 $

Polyurethane molding RSHPU-007

from 208.93 $

Wooden Molding K-127

from 6.28 $

Go to Catalog

Checklist: what to verify right now, before payment

Print or open in a neighboring tab. This is your minimum filter before any decor order.

Dimensions and profile:

• Does the profile length match the room or facade size?

• Is the molding width proportional to the wall height or facade?

• Is the relief depth suitable for the room scale?

• Is there a drawing or profile diagram in the product card?

Quantity and reserve:

• Has the linear footage been calculated by perimeter or length of all elements?

• Has a 10–15% reserve been added for trimming, corners, and installation errors?

• Have piece items — rosettes, overlays, corner inserts — been counted?

Order completeness:

• Added adhesive for polyurethane molding?

• Acrylic sealant added?

• Primer for painting added?

• Paint added or coating specified?

• Purchased Decor for Molding — corner inserts for frames?

Material compatibility:

• Wooden elements and polyurethane — in the same style?

• Does the wood finish match the polyurethane paint?

• Was wood chosen for load-bearing wooden parts instead of polyurethane?

Delivery:

• Have the profile lengths and their packaging method been clarified?

• Has it been verified that the transport company accepts long cargo?

• Have the delivery dates been clarified to match the installation schedule?

Is everything marked? Now let's break down each point in detail.

Watch video ...

Why a photo in the catalog is only half the information

Here's a real story that every decor store manager hears at least once a month. A customer chose a molding based on a photo: beautiful, classic profile, looks harmonious in the picture. The product arrived — the molding turned out to be 90 mm wide. In a small bedroom of 12 m² with a 2.5 m ceiling, it looks like a cornice from a palace hall.

Photos in the catalog are always taken in studio conditions or in a large interior. The same profile in a spacious living room with 3 m ceilings looks delicate, but in a city apartment — heavy. This doesn't mean the molding is bad. It means the photo doesn't convey scale.

Our factory also produces:

Wooden crown molding K-105

from 3.26 $

Wooden Molding K-091

from 84.61 $

Wooden Batten K-102

from 49.12 $

Wooden molding K-103

from 95.71 $

Wooden Batten K-006

from 4.59 $

Wooden Batten K-020

from 5.19 $

Wooden Batten K-025

from 10.74 $

Wooden Molding K-093

from 43.93 $

View Full Product Catalog

What to look at in the product card instead of the photo

Before admiring the image, open the specifications tab and find:

• Width (in mm) is the horizontal size of the profile;

• Height (in mm) is the projection from the wall or ceiling plane;

• Length of one rod or slab — standard for polyurethane molding is 2000 mm;

• Relief depth — how much the highest element of the ornament protrudes;

• Purpose — ceiling, wall, furniture, floor.

A good product card includes a diagram or drawing of the profile at actual scale. If the card of the polyurethane molding has a drawing — be sure to print it at 1:1 scale and hold it against the wall. This will take three minutes and save you disappointment from unmet expectations.

How to assess the scale of a molding before ordering

Simple method: take a ruler and mark the width of the molding horizontally on the wall, and the height vertically. Outline the contour with a pencil. Step back 3–4 meters. If the contour looks harmonious — the size is correct. If the contour seems too heavy or too thin — look for another profile.

This same method works for ceiling roseDraw a circle of the required diameter on the ceiling. A 500 mm diameter rosette in a small room is a very large accent. A 200 mm rosette on the ceiling of a large living room will get lost.

How to calculate the quantity: step by step

Incorrect quantity calculation is the second most common cause of problems with online ordering of stucco molding. Either there isn't enough — and you have to pay extra for express delivery. Or there is excess — and a return. In both cases, loss of money and time.

Calculation of linear decor

Moldings made of polyurethane, Polyurethane trim и Pogonazh iz massiva sold by linear meters or in multiples of the standard rod length (usually 2 m).

Calculation formula:

1. Measure the length of all sections where the molding will go;

2. Add up all sections — you get the net footage;

3. Multiply by a factor of 1.12–1.15 (allowance for cutting and joints);

4. Divide by 2 (rod length) — you get the number of rods;

5. Round up.

Detailed calculation of moldings for a wall — on a separate page: how to calculate moldings and stucco decor for a wall.

A special case is corners. If the molding runs along the perimeter of the room, each internal corner requires cutting at 45°. Each corner uses an additional 5–10 cm on each side. With 4 corners, this is 40–80 cm of extra material that needs to be accounted for in the reserve.

Professional tip: instead of cutting corners, use Decor for Molding — corner and lock inserts. They are installed in the corners first, and straight pieces of molding butt against them without cutting. No cutting means no losses on corners — reserve is only needed for linear sections.

Calculation of piece elements

Polyurethane appliqués, Decorative stucco, ceiling rosettes are counted individually.

For a ceiling rosette — usually one per room (in the center of the ceiling), less often — a symmetrical pair in a long hall.

for decoration for moldings: 4 corner inserts per one frame × number of frames = total quantity. For molding along the perimeter of the room: 4 internal corners = 4 corner inserts.

For decorative overlays on walls or furniture — according to the layout diagram: draw the wall or facade, arrange the overlays symmetrically, count.

Why a 10–15% reserve is not over-insurance, but a standard

Without a reserve, normal installation is impossible. Here's what consumes the "extra" meters:

• Cutting ends during butt installation — at least 1–2 cm from each end;

• Fitting length on the last section is always a remainder;

• Chip or crack due to careless handling;

• Uneven wall requiring an additional piece;

• Error on the first cut — especially when trimming at 45°.

Professional installers always work with a minimum 10% margin. For complex configurations — 15%.

Wooden decor online: features of selection and ordering

Buy Wooden decoration Online is a different experience compared to buying polyurethane. Wood is alive: it has texture, grain direction, shade variations even within the same batch. This must be taken into account.

What to look for when choosing wooden decor online

Wood species. Most decorative wooden elements — handles, legs, overlays, brackets — are made from beech. Beech is a dense, uniform wood that accepts milling and painting well. Important: beech paints differently than oak or pine — more evenly, without pronounced texture under paint.

Coating. Most STAVROS wooden products come in 4 coating options: white, black, brown, clear varnish. If you need a non-standard color — check the possibility of tinting before placing an order.

Dimensions of wooden handles. Furniture Handles have two critical parameters: overall length and center distance — the distance between mounting holes. Standard values: 64, 96, 128, 160 mm. Before ordering a handle, be sure to check which center distance your facade is drilled for — or that you will drill the facade specifically for this handle.

Height and mounting of legs. Furniture legs are specified with height from the base to the mounting platform. The mounting method — tenon or threaded stud — check in the product card. Tenon mounting requires milling a mounting socket in the body. Threaded mounting requires installing an insert nut.

Wood acclimatization: what they don't write in catalogs

Wooden products — handles, legs, Brackets, Pogonazh iz massiva — after delivery, must be kept in the room for 24–48 hours before installation. The wood adapts to humidity and temperature. If installed immediately after unpacking, in a room with different conditions, micro-changes in geometry are possible: slight warping, appearance of gaps at joints.

This is especially important for glazing beads, cover strips, and moldings — long thin profiles sensitive to changes in humidity.

Polyurethane decor: what to check in the product card

polyurethane decor — moldings, overlays, cornices, rosettes — the product card should contain comprehensive information for installation. Check each of these parameters.

Seven parameters of the polyurethane decor card

1. Purpose. Ceiling molding — not wall-mounted. Wall decor — not for ceiling. Wall molding is installed vertically or horizontally on the wall; ceiling molding — in the wall-ceiling junction area. Confusion in purpose gives the wrong profile in the wrong place.

2. Width. This is the horizontal size of the profile — what you see "from the front". For wall frames: the width of the molding should be 3–6% of the wall height. For ceiling cornice: width — 5–8% of the ceiling height.

3. Projection. This is the depth of the profile — how far the molding protrudes from the wall. For furniture facades — the projection should not exceed the thickness of the facade. For walls — the projection sets the "shadow" that the molding will cast under side lighting.

4. Pattern. Classic, floral, geometric — make sure the pattern of the molding matches the pattern of other elements in your order: polyurethane overlays, decoration for moldings и wooden decor.

5. Paintability. All polyurethane products are painted with acrylic and oil paints. Make sure the card indicates: "for painting" or "in white primer".

6. Installation conditions. Polyurethane is not installed on wet or dusty surfaces. Installation temperature — not lower than +5°C. If work is carried out outdoors or in an unheated room in winter — check the permissible conditions.

7. Recommended adhesive. The card or the manufacturer's FAQ section should have a link to the recommended type of adhesive. For STAVROS polyurethane products — mounting adhesive on an acrylic or polymer base. Details: what to glue polyurethane molding with.

What to add to the cart along with stucco: full list

This is the most frequently missed step. The buyer added moldings, clicked "pay" — and then calls the store for glue, because installation is tomorrow, and there is no glue.

Mounting materials: essential minimum

• Mounting adhesive for polyurethane — a special solvent-free compound that does not damage polyurethane. Regular "Moment" or nitro glue is prohibited: they dissolve the surface. Consumption: approximately 1 tube per 3–5 m of profile;

• Acrylic sealant — for sealing joints and seams before painting. Acrylic, not silicone. Silicone cannot be painted;

• Primer — mandatory before painting polyurethane. Without primer, paint adheres poorly, especially on polyurethane products with a white factory coating;

• Paint — water-based or alkyd enamel. Quantity: depends on the painting area. For small volumes of stucco, 0.5–1 L is sufficient;

• Painter's tape — for securing the molding until the glue sets.

Wooden elements: don't forget the fasteners

for wooden handles — self-tapping screws matching the handle's mounting size. Standard: M4 × 25 mm for most furniture handles.

for wooden legs — threaded insert nuts (for threaded connections) or additional glue (for tenon joints).

for brackets — self-tapping screws into the wall or frame, diameter and length depend on the load.

for solid wood trim — finishing nails or liquid nails + clamping.

Finishing materials for wood

If wooden elements will have a natural texture — varnish or oil. Varnish provides a harder protective film; oil gives a more natural look and easier renewal. For handles and legs in active use — varnish is preferable.

If wood and polyurethane will be painted in a single tone — ensure that the wood has been primed and coated with 1–2 layers of paint before finishing. The wooden surface requires more thorough preparation for painting than polyurethane.

How to order wood and polyurethane together: distribution logic

One of the most common questions before ordering online: “I need both wooden and polyurethane parts — how do I know which should be wood and which polyurethane?”

The answer is based on one principle: wood — where there is load and contact; polyurethane — where there is decor and relief for painting.

When wood is needed

• Handles on doors and drawers — daily repeated contact;

• Legs and furniture supports — bear the weight of the product;

• Shelf brackets — bear the load;

• Glazing bead — fixes the glass, subjected to pressure;

• Batten strips and trims — load from abutment to wall and other elements;

• Carved overlays in central areas — where you want to feel the texture of natural material.

When polyurethane is enough

• Moldings on walls and ceiling — no load, only decor;

• Cornices and baseboards — linear decor without constant contact;

• Ceiling rosettes — decor without any mechanical impact;

• Furniture facade frames for painting — decor without constant grip;

• Decorative overlays on side panels — pure decor;

• Top furniture cornice — no load.

Task distribution table

Ready-made baskets for typical tasks

This is not a strict regulation — it's a guide for those who don't want to miss anything.

Basket: wall with molding frames

The task is to decorate the living room wall with molding frames in a classic style.

• Moldings made of polyurethane — linear footage around the perimeter of all frames + 15% spare;

• Decor for Molding — 4 pieces for each frame;

• Decorative stucco — overlays in the center of each frame (optional);

• Construction adhesive — 1 tube per 3–5 m;

• acrylic sealant;

• Primer + paint;

• Painter's tape.

Additional Items: Wooden decoration — if you want an accent carved element in the center of the main wall.

Cart: ceiling with rosette and cornice

The task is a classic ceiling design with a cornice and a central rosette.

• Polyurethane ceiling rosettes — 1–2 pieces;

• Moldings made of polyurethane — ceiling cornice, linear molding around the perimeter + 15%;

• Decor for Molding — corner inserts, 4 pieces;

• Assembly adhesive, sealant, primer, paint.

Cart: classic furniture fronts

Task — to design furniture fronts for painting in a classic style.

• Moldings made of polyurethane — facade frames, linear molding + 15%;

• Decor for Molding — 4 per frame × number of fronts;

• Wooden furniture handles — according to the number of doors and drawers;

• Furniture legs — if the product is on legs;

• Assembly adhesive for moldings, fasteners for handles and legs, primer, paint.

Cart: classic hallway

The task is wall moldings, baseboard, wooden decor.

• Polyurethane trim — baseboard;

• Moldings made of polyurethane — wall frames at door height;

• Wooden decoration — accent overlays;

• Decor for Molding — corner inserts;

• Construction adhesive, sealant, primer, durable paint (or abrasion-resistant enamel).

In the hallway, the paint should be resistant to mechanical wear — acrylic satin or semi-matte enamel. Matte paint in the hallway is a poor choice: it wears off quickly.

Basket: classic living room — full decor

The largest basket. Complex: walls, ceiling, furniture, accent decor.

• Moldings made of polyurethane — wall frames + ceiling cornice;

• ceiling rosettes — central ceiling accent;

• Decor for Molding — corner inserts;

• Polyurethane appliqués — accents in wall frames;

• Wooden decoration — carved elements for a fireplace portal or console;

• Furniture Handles и Legs — for living room furniture;

• Decorative brackets — for a console or fireplace shelf;

• Glue, sealant, primer, paint, fasteners, 15% spare.

Delivery: what to check before payment

Long profiles — linear moldings, 2 m long — require a special approach during transportation. This is not a parcel with legs that can be placed in any box.

What to clarify with the store before placing an order

Packaging method for long profiles. Moldings 2 m long must be packed in rigid transport tubes or flat spacers with fixation. If the store packs in soft bubble wrap without a rigid base — the risk of bending is high.

Transport company restrictions. Some transport companies do not accept cargo longer than 1.5 m. Clarify before ordering: which carrier is used for delivery and what are their size restrictions.

Timelines and fitting into the installation schedule. If installation is planned for a specific date, order with a buffer of 3–5 days. A 2-day delivery delay can disrupt the crew's installation.

Regions with special conditions. In remote regions, delivery of long profiles may take 10–14 days. Check the timelines when placing your order.

How to store polyurethane decor before installation

Polyurethane profiles must be stored horizontally on a flat surface. Storing vertically or with support only on one end leads to sagging and deformation of the profile. After deformation, the profile is difficult to straighten.

Storage temperature: from 0 to +30°C. Direct sunlight is prohibited: polyurethane turns yellow.

Humidity: standard room humidity. Before installation, keep the profiles in the room for 12–24 hours so the material reaches working temperature.

How to store wooden decor before installation

Wooden parts — in a dry room, without contact with damp surfaces. At humidity above 70%, wood absorbs moisture and may slightly change its geometry. This is especially critical for thin moldings.

Do not store near exterior walls in winter — condensation may form there.

Mistakes when buying stucco online: analysis of eight typical scenarios

Error 1: ordered moldings without a layout diagram

Result: bought 30 m, needed 38 m. Installation stopped halfway.

Solution: before ordering, draw a wall diagram indicating all molding sections. Add up the lengths. Add a reserve. Only then — add to cart.

Error 2: did not check the profile length when ordering

Standard polyurethane molding rod is 2 m. Wooden linear molding ranges from 1.5 to 3 m depending on the manufacturer. Some buyers calculate linear meters but order 'pieces' — and get half of what they need.

Solution: always clarify the unit of sale: linear meter or piece (with length specified).

Error 3: chose glue 'from the cupboard'

Construction adhesive left over from tiles, plastic, or drywall may not be suitable for polyurethane. Worse: glue with organic solvents destroys polyurethane from within, the profile 'melts' and deforms.

Solution: buy glue for polyurethane together with the main order. The right choice is — in this article.

Error 4: bought wood and polyurethane in different styles

Baroque acanthus overlays + geometric moldings in the Art Deco style = a stylistic conflict that is immediately visible. This is not "wealth" — it is visual chaos.

Solution: all decorative elements in an order must be from the same catalog, the same manufacturer, and the same style family. Check the style of each element before adding it to the cart.

Error 5: did not check the depth of the relief

A molding with a projection of 25 mm on a furniture facade 16 mm thick is a conflict: the hinges will not be able to open the door correctly. A molding with a projection of 5 mm on a wall with a ceiling height of 3 m will "disappear" — no shadow will form, the relief will not be readable.

Solution: the projection of the molding should be 10–20% of its width. For wall moldings — projection 8–20 mm. For furniture moldings — no more than 12–15 mm.

Error 6: forgot about corner inserts for frames

Ordered moldings — did not order Decor for Molding. No miter box, nothing to cut at 45°. Installation stopped.

Solution: corner inserts are a mandatory item for any molding project. 4 pieces per frame.

Error 7: ordered without accounting for delivery of long profiles

The transport company did not take a load 2 m long. Or it did, but delivered it with a break.

Solution: clarify the packaging method and delivery conditions for long profiles before placing an order.

Error 8: did not buy sealant and primer

Without sealant, the seams between the moldings are visible under the paint. Without primer, the paint peels off after 2–3 months.

Solution: sealant and primer are mandatory items in every order that includes polyurethane decor for painting.

Correct procedure before payment: final algorithm

Let's put it all together into one practical algorithm — from selecting a product to clicking the "Pay" button.

1. Draw a diagram. Sketch the wall, ceiling, furniture facade, or other surface with actual dimensions. Mark where the moldings will go, where the overlays are located, and where the handles are.

2. Write down the dimensions. The length of each molding section, the diameter of the rosette, the size of the overlays. Compare with the specifications in the product card.

3. Calculate the linear footage. Sum of all sections + 15% reserve = quantity to order. Divide by 2 (standard rod length) and round up.

4. Check the style. All order items must be in the same style. Polyurethane moldings и Wooden decoration — in one catalog, in one family of ornaments.

5. Add corner inserts. Decor for Molding — 4 pieces for each frame.

6. Add installation materials. Adhesive, sealant, primer, paint, painter's tape — all at once.

7. Add fasteners for wooden parts. Screws for handles, anchors for legs — verify against product specifications.

8. Clarify delivery. Packaging method for long profiles, carrier, deadlines.

9. Save the layout diagram. It will be needed during installation — and even more so for reordering.

10. Pay. Only now.

STAVROS: one catalog for the entire decor order

The most reliable way to avoid stylistic and geometric conflicts between order elements is to buy everything from one manufacturer. Then the proportions of profiles, ornament patterns, coatings, and product geometry match within a single system.

STAVROS is a Russian manufacturer with its own production facility in Saint Petersburg. The company's history dates back to 2002, starting with the restoration of the Konstantinovsky and Alexander Palaces, and the Hermitage. The precision and consistency of elements is not a marketing slogan, but a production standard developed over years of working with historical sites.

The STAVROS catalog includes the entire decorative set:

• Polyurethane moldings — moldings, cornices, rosettes, overlays, linear profiles;

• Moldings made of polyurethane — for walls, ceilings, furniture;

• Polyurethane appliqués — decorative stucco for walls and furniture;

• ceiling rosettes — classic and modern profiles;

• Decor for Molding — corner and lock inserts;

• Polyurethane trim — baseboards, transition profiles;

• Wooden decor and overlays — carved solid wood elements;

• wooden furniture handles — 32 models, 4 finishes;

• Furniture legs — classic turned profiles;

• Decorative brackets from solid wood;

• Pogonazh iz massiva — glazing bead, layout, casing strips.

Order from one piece. Contact us to confirm shipping to your destination. Showrooms in Saint Petersburg and Moscow. Warehouse — shipment from 3 business days. Custom order — from 5 business days.

Frequently asked questions

What to check before paying for a stucco order online?
Dimensions in the card (width, projection, length), compliance with the project style, correct calculation of linear footage with a 15% margin, availability of glue, sealant, primer, paint, corner inserts, and fasteners for wooden parts. Also, clarify delivery conditions for long profiles.

Can I order wooden decor and polyurethane stucco together?
Yes, and this is standard practice. Wooden decoration — for durable and tactile areas: handles, legs, carved accents. polyurethane decor — for moldings, cornices, ceiling rosettes, and facade frames for painting. Both materials combine well with a single finish coat.

What margin should be taken when ordering moldings?
Standard — 10–15%. For work with corner cuts without inserts — 15%. When using decoration for moldings in corners — 10% is sufficient.

What is most often forgotten to buy together with stucco molding?
Mounting adhesive, acrylic sealant, primer, and corner inserts decoration for moldings. These items are needed during installation — without them, the work cannot be completed.

How to tell from a photo in the catalog if a molding will fit?
The photo gives an idea of the style, but not the scale. Be sure to look at the numerical characteristics: width and profile projection. A full-scale profile drawing — print it out and hold it against the wall. This is the best way to check the scale before ordering.

Is primer needed before painting polyurethane?
Yes, definitely. Without primer, paint on polyurethane adheres poorly and starts peeling at the first mechanical impact. Primer is the first layer that creates adhesion. After primer — 2–3 coats of paint.

How to order polyurethane molding to the regions?
Check with the manager about the packaging method for long profiles and the transport company. Delivery times to the regions are 5–14 days depending on distance. Order with a time buffer relative to the installation date.

How to avoid mistakes when installing molding after receiving your order?
Read the installation instructions before starting work: installing polyurethane molding. Basic rules: dry and clean base, correct adhesive, press until set, seal joints before painting.