Buy a tabletop: shaped ST-015 1385 × 534 mm for a console or oval ST-027-1 1200 × 900 mm for a coffee table — which to choose

Comparison of two furniture tabletops of the same thickness, but for completely different types of tables

ST-020 countertop

from 252.76 $

Top ST-020-1

from 189.21 $

Tabletop ST-001 from MDF

from 146.02 $

Top ST-015

from 160.66 $

Go to Catalog

ST-015 or ST-027-1: short answer

ST-015 is worth buying if you need a long shaped tabletop for a wall console. The size 1385 × 534 × 30 mm allows you to get a noticeable decorative surface under a mirror, in the hallway, foyer, living room, or behind the sofa, without taking up the depth of a full-sized central table. ST-027-1 is best chosen for an oval coffee or cocktail table accessible from multiple sides. Size 1200 × 900 × 30 mm suits the area in front of the sofa, between armchairs, a hotel lobby, or a spacious waiting area. ST-015 is 185 mm longer, but ST-027-1 is 366 mm deeper. Therefore, the main difference is not the edge pattern, but the furniture placement: along the wall or in the center of the lounge area.

Buy shaped tabletop ST-015 Buy oval tabletop ST-027-1 Buy carved base STL-015 Buy base STL-027-1 Catalog of tabletops and bases

ST-015 — 1385 × 534 × 30 mm. Shaped elongated model for a wall console and carved frame STL-015.

ST-027-1 — 1200 × 900 × 30 mm. Oval model for coffee or side table and underframe STL-027-1.

Both tabletops have a thickness of 30 mm. Matching thickness does not make them interchangeable in purpose and base.

MDF and combined versions are available. Options with MDF base, solid wood elements, and oak or beech veneer are confirmed.

Processing quality — "Prestige". Finish, color, and protective system must be agreed upon before assembly.

Permissible load is not confirmed. Stability and fastening are calculated for the set of tabletop, underframe, and specific usage scenario.

You can buy a tabletop only after answering the main question: where will the furniture stand and how will people approach it. A long surface against a wall and an oval table in front of a sofa may have the same thickness, similar materials, and a classic profile, but they work completely differently. The mistake in choice will not appear in the catalog, but after assembly, when the console turns out to be too deep for a passage or the coffee table too narrow for a central area.

ST-015 is elongated in length and limited to a depth of 534 mm. It creates a large decorative surface along the wall but does not require space on all four sides. ST-027-1 is shorter, but its depth reaches 900 mm. The oval shape is designed for viewing and access around the table, so the model is more logically placed in front of the sofa, between armchairs, or in the center of the lounge area.

The buyer is not just choosing a shaped or oval tabletop. They are assembling a specific type of furniture. For ST-015, a carved console frame STL-015 is provided. For ST-027-1, a coffee table base STL-027-1 is provided. A random base may not match in dimensions, support points, shape, and proportions.

For a wall-mounted item, you can choose ST-015 measuring 1385 × 534 mm. For the central area, choose ST-027-1 measuring 1200 × 900 mm. If neither shape fits the room, it is more useful to compare oval and shaped tabletopsthan to try to adapt a ready-made model to an unsuitable location.

Watch video ...

A furniture tabletop is not a kitchen work surface

ST-015 and ST-027-1 are designed for assembling furniture: consoles, side tables, or coffee tables. They cannot be automatically considered as kitchen work surfaces, sink countertops, cooktops, bathroom surfaces, or for constant contact with water. Such scenarios require other confirmed properties and design solutions.

Our factory also produces:

Wooden crown molding K-105

from 3.29 $

Wooden Decor N-024

from 18.05 $

Wooden decoration N-066L

from 38.06 $

Church Furnishings M-013

from 40.99 $

Marseilles Pouf 005-001

from 701.32 $

Furniture handle Pioneer HL-051M

from 16.47 $

Wooden Cornice KZ-011

from 34.65 $

Sample of slat panel OPAN-007

from 6.71 $

View Full Product Catalog

The shape is tied to a specific piece of furniture

The contoured edge of ST-015 follows the logic of the console frame. The oval ST-027-1 is designed for a central table. Purchasing only based on a preferred edge breaks this connection.

Mounting depends on the underframe

Support points, frame width, and apron placement must match the tabletop. Matching overall length does not guarantee compatibility.

Material is chosen based on finish and scenario

MDF is suitable for a project with opaque enamel. A composite base with oak or beech veneer allows preserving the visible wood surface. This option cannot be called solid wood.

The top surface requires protection

Books, lamps, drinks, and decorative items come into contact with the finish. The specific coating and care instructions must be coordinated with the material and furniture purpose.

The set is more important than an individual part

It is useful to study in advance how to assemble a table from a tabletop and a base, and then order a matched pair rather than random elements.

Confirmed specifications ST-015 and ST-027-1

After the table, it is clear why the comparison cannot be reduced to style. The models share the same thickness, set of main materials, and level of finishing, but the dimensions create two different purchase paths. ST-015 is assembled around the wall and the console frame. ST-027-1 is assembled around the seating area and the table base accessible from all sides.

ST-015 and ST-027-1: direct comparison by tasks

Why the same thickness of 30 mm does not make models interchangeable

Thickness affects the external profile and the operation of the fastening, but does not determine the purpose. ST-015 and ST-027-1 both have 30 mm, yet the support distribution, distance between edges, and access to the surface differ. If you place a cantilever tabletop on a random central base, the narrow depth can make the furniture disproportionate. If you try to use the oval ST-027-1 against a wall, the large depth may block the passage.

The support area varies

ST-015 is elongated along one axis and relatively narrow along the other. The underframe must support the shaped edges and maintain the stability of the wall-mounted item. ST-027-1 distributes the surface around the oval center and requires a different base geometry.

The center of gravity is determined by the set

The tabletop itself does not indicate stability. It depends on the position of the legs, aprons, base, and actual load. Therefore, data from one underframe cannot be transferred to another.

Overhangs must be calculated

A beautiful overhang works only with even distribution and reliable fastening. Too large an overhang creates leverage, too small makes the frame visually heavy. Dimensions are checked against the complete diagram.

A shaped edge requires its own logic

ST-015 must follow the contour of the carved frame and the wall composition. Oval ST-027-1 must look equally convincing from all sides.

Thickness does not confirm load capacity

30 mm cannot be turned into a promise of a specific load capacity. The permissible load depends on the material, underframe, fasteners, and usage conditions.

Curved shape ST-015: why a console needs it

ST-015 is 1385 mm long and 534 mm deep. This format creates a long horizontal line but does not turn the furniture into a full-fledged central table. The curved edge helps connect the tabletop with the carved frame and makes the wall console an independent interior object.

Long surface under the mirror

The width of 1385 mm allows placing lamps, vases, clocks, or a small decorative composition on the sides of the center. At the same time, the mirror and tabletop must be aligned in width and axis.

Limited depth

534 mm is 366 mm less than the depth of ST-027-1. This is important for hallways, foyers, areas near stairs, and passages behind a sofa, where every extra centimeter of protrusion affects movement.

Curved edge as part of the silhouette

It creates a play of protrusions and concave lines. This shape is noticeable even with solid-color enamel. In veneered execution, the relief is supported by the wood grain.

Not a dining or work table

The console tabletop cannot be automatically used as a full-fledged work surface. A depth of 534 mm may be insufficient for a scenario where a person sits on both sides or places large equipment.

Combination with STL-015

For a complete assembly, you can Buy carved base STL-015. The frame has a confirmed size of 875 × 1371 × 512 mm, is made of beech or oak, and is designed for a console with ST-015.

Commercial choice

For a hallway or foyer, you can Buy shaped tabletop ST-015, and before finishing, study features of the wave-like shape of ST-015.

Oval shape ST-027-1: why it suits a coffee table

ST-027-1 has a size of 1200 × 900 × 30 mm. The oval shape softens the central furniture and makes the surface accessible from the sofa, armchairs, and passage. The table has no pronounced "front", so it can be viewed from different points in the room.

Wide work surface

A depth of 900 mm provides space for books, a tray, drinks, and decorative items. Unlike ST-015, the central area does not turn into a narrow strip.

Soft contour

An oval is visually calmer than a rectangle and does not create sharp corners in passages between upholstered furniture. This does not negate the need to leave free space around.

Access from multiple sides

People approach the coffee table from the sofa, armchairs, and passage. The underframe should be positioned so that legs and decorative elements do not obstruct movement.

Central furniture

ST-027-1 looks better on a rug or as part of a soft seating group. Against a wall, its depth may be excessive, and the oval will lose the purpose of being viewable from all sides.

Combination with STL-027-1

For a complete base, you can Buy base STL-027-1. It is intended for a coffee or side table and is paired with ST-027-1.

Commercial choice

For the living room, you can Buy oval tabletop ST-027-1 и view specifications for ST-027-1 before choosing the material.

Length difference of 185 mm: when it really matters

ST-015 is 185 mm longer than ST-027-1. This difference does not make the console "larger" in every sense. It increases the horizontal span along the wall, but not the depth. For a mirror, panel, or long wall, this is an advantage. For a central table, length without sufficient depth can result in an overly elongated surface.

Under the mirror

The long ST-015 helps create a symmetrical composition. But the mirror does not have to fully match its length: the proportion is determined by the interior and the wall.

Behind the sofa

The console can support the length of the sofa back and create a shelf for lighting and decor. It is necessary to check that it does not block the passage or interfere with curtains or outlets.

In a narrow hallway

The extra length works along the wall and has almost no effect on the passage width. The main limitation remains the depth of 534 mm.

In front of the sofa

Length 1200 mm ST-027-1 is usually better associated with an oval shape and a depth of 900 mm. The table feels compact horizontally but full-sized in area.

Depth difference of 366 mm: the main factor in choosing

The depth of ST-027-1 is 366 mm greater. This number most often decides the purchase. The extra 36.6 cm noticeably changes the passage, access to the sofa, position of armchairs, and distance to the wall.

For a console, the depth should be manageable

534 mm still require measurement. In a very narrow hallway, even ST-015 can protrude too far. Door panels, cabinets, and the path of movement need to be considered.

For a coffee table, depth creates usable area

900 mm allows using the surface from different sides. With less depth, the item may look like a wall console accidentally placed in the center.

The difference affects the rug

ST-027-1 takes up more space inside the seating group. The rug should support the oval and not create tightness around the table base.

The difference affects delivery access

900 mm needs to be carried through doors, corridors, stairs, and elevator. The route is checked before ordering, especially if the countertop is delivered with a finished finish.

Wall-mounted or freestanding furniture item

Wall console

It is attached to the wall, mirror, panel, lights, and outlets. The user approaches primarily from the front. ST-015 corresponds to this scenario.

Central coffee table

It connects the sofa and armchairs, participates in walkways, and is viewed from all sides. ST-027-1 corresponds to this arrangement.

Console behind the sofa

Formally, it may not be against the wall, but it remains long and relatively narrow. It is important to secure stability and check access to the back.

Oval table against the wall

Such placement is only possible with a deliberate design. Most of the oval loses access, and a depth of 900 mm may block the room.

Selection by purpose

Before studying color and veneer, formulate one phrase: "I need a console along the wall" or "I need a coffee table in front of the sofa." It immediately filters out unsuitable models.

ST-015 for the hallway

The hallway requires furniture that creates space for keys, a lamp, a vase, or small decor, but does not obstruct movement. ST-015 suits this scenario better due to its depth of 534 mm and length of 1385 mm. It forms a noticeable horizontal line and can replace a deeper table.

Checking the passage

Measure not only the distance from the wall to the opposite furniture, but also the opening trajectory of the entrance door, cabinet, and interior doors. The shaped edge may protrude more at certain points than a conventional straight line.

Connection with the mirror

The console and mirror share a common axis. Outlets, switches, and sconces should not fall behind the frame or onto the edge of the tabletop. A paper outline helps identify conflicts before purchase.

Storage of small items

ST-015 provides a surface but does not automatically become a storage system. Drawers, shelves, and other elements depend on the frame design and project.

Finish for the entry area

The surface encounters keys, bags, and daily contact. The finish must match real use, not just the wall color.

Commercial route

For a long wall, you can choose a long curved countertop for the hallway and immediately match it with the frame of a wall-mounted console.

ST-015 under the wall mirror

Composition width

A length of 1385 mm creates a base for a large mirror. But the mirror should not accidentally extend beyond the edges or look too small. The proportion is assessed on the wall, taking the frame into account.

Central axis

The center of the countertop, mirror, and frame must align if the design does not involve asymmetry. Marking is done from the wall, not from a random corner of the room.

Lighting and outlets

Wall sconces, switches, and electrical outlets are checked before ordering. The console should not block access or force the mirror to be shifted after installation.

Decorative load

Vases, clocks, and lamps are placed so that the composition does not overload the shaped edge. The permissible physical load should be clarified based on the tabletop and frame set.

ST-015 console behind the sofa

Wall-mounted logic can also work behind the sofa if the furniture is placed in the center of the room. ST-015 creates a long, narrow surface for lights, books, and decor without taking up the depth of a full table. However, stability and access to the frame need to be checked especially carefully.

Backrest length

The tabletop does not have to completely match the sofa, but it should look proportional. A console that is too short gets lost, while one that is too long protrudes into the walkway.

Passage depth

534 mm are added to the sofa depth. If there is a passage behind the console, it is measured taking into account the protrusions of the shaped edge and the people who will use the room.

Cables and light

Desk lamps require a safe connection. Wires should not pass through moving areas or interfere with cleaning.

Stability

A console that does not rest against the wall visually and structurally must be particularly stable. The specific fastening or additional fixation is determined by the project.

ST-027-1 in front of the sofa

The oval tabletop 1200 × 900 mm is designed for the central area. It provides a wide surface but requires space around it. Before purchasing, you need to check not only the size of the rug but also the seating comfort, passage to the sofa, and opening of adjacent furniture.

Distance to upholstered furniture

A universal gap is not assigned without room and user data. You need to sit on the sofa, stretch your legs, walk from the side, and check if you have to go around the table too tightly.

Access from armchairs

The oval is convenient when several seats face the table. The central surface should be accessible without leaning too much, and the under-table should not interfere with legs.

Carpet

The table can be placed entirely on the rug or in another agreed layout. The main thing is that the under-table stands stable and the oval does not look accidentally shifted.

Practical use

Books, a tray, and drinks require a protective finish. ST-027-1 should not be considered a moisture-resistant kitchen surface without confirmation.

Commercial route

For the soft seating group, you can choose a tabletop for the coffee table in front of the sofa and match frame of the oval coffee table.

Oval table between armchairs

Common center of the group

ST-027-1 connects two armchairs and a sofa if each user has convenient access. The oval softens lines and does not impose a rigid direction.

Not just a decorative surface

The depth of 900 mm allows the table to be used by several people. However, the placement of items should not create overload or hide the decorative under-table.

Diagonal passages

The oval is visually convenient, but the maximum width of 900 mm is maintained. The paper mockup should replicate the full contour, not just the central rectangle.

Set height

Convenience depends on the underframe and the finished height. The exact height of STL-027-1 is not specified in the SEO scheme, so it is checked in the product card before ordering.

Choice for hotel lobby and waiting area

ST-015 along the wall

The console is suitable for the registration area, passage, wall under a mirror, or decorative panel. It creates space for lighting and accessories without occupying the center.

ST-027-1 in the center

The oval table gathers armchairs and sofas. It must withstand frequent use, so the finish and fastening are chosen considering commercial load, without making unconfirmed promises.

Serial production

For multiple rooms or waiting areas, it is important to order identical materials and keep a control sample of the finish. Combined veneered surfaces may differ in pattern.

Service route

Staff needs access for cleaning. ST-027-1 should not block carts and aisles, ST-015 should not protrude into the corridor.

How to measure free space near the wall

For ST-015, it is not enough to measure a section 1385 mm long. You need to account for the depth of 534 mm, shaped protrusions, under-table, baseboard, sockets, doors, and objects above the console.

Mark the length on the wall

Use painter's tape to mark 1385 mm. Check symmetry relative to the mirror, panel, or architectural axis.

Mark the depth on the floor

Draw a contour 534 mm from the wall. It is better to print the shaped edge from DWG, because the maximum protrusion may not be centered.

Check the baseboard

The frame may not fit flush against the wall due to the baseboard. This changes the actual depth of the furniture and the position of the countertop.

Open all doors

The entrance, interior, and cabinet doors must operate without collision. Measuring in the closed state does not show the real scenario.

Look at eye level

The countertop connects with the mirror, outlets, and switches. Mark the finished height of the set after checking STL-015.

How to check the space for ST-027-1

An oval template measuring 1200 × 900 mm is laid on the floor. A rectangle of the same size only gives maximum boundaries but does not show the soft corners. It is better to cut out a real oval.

Sit on the sofa

Check the position of the legs, the ability to place an object on the table and stand up without collision. Users of different heights may perceive distance differently.

Walk around

Walk around the layout along all main routes. Consider chairs, poufs, doors, and the edge of the carpet.

Add an under-table

Mark the approximate outline of STL-027-1 according to the card. The surface may fit, while the base may interfere with legs or passage.

Check the view

From every seat, the table should appear central, not offset. The oval is especially sensitive to incorrect alignment relative to the sofa and rug.

Why a full-size mockup is more useful than a photo

The photo hides depth

ST-015 and ST-027-1 may appear similar in scale on screen. The layout shows a 366 mm difference directly in the room.

The layout accounts for furniture

The sofa, armchairs, doors, and baseboard are involved in the selection. A separate product image does not show collisions.

You can compare two models simultaneously

First lay out the outline of ST-015, then ST-027-1. Photograph from the same angle and compare not the beautiful edge, but the use of space.

The layout helps coordinate the project

The client, designer, and installer see the same geometry. This reduces the risk that each person interprets the word "narrow" or "oval" differently.

Underframe STL-015: console kit

STL-015 has a confirmed size of 875 × 1371 × 512 mm, is made from beech or oak, and is designed for assembling a carved console with ST-015. The frame size is close to the tabletop dimensions, but overhangs and attachment points need to be checked against the drawings.

Beech or oak

The base wood species must match the selected tabletop option and finish. With opaque enamel, the material difference may be less noticeable, but the technology is still coordinated.

Wall-side geometry

The frame supports a long surface and forms the decorative front of the console. It cannot be used as a central coffee table base without checking stability and rear visibility.

Unified finish

The tabletop and underframe can be painted in one color or assembled with contrast. A test sample is needed for both materials.

Commercial choice

For a complete assembly, you can choose a base for a long shaped tabletop and compare it with ST-015 before finishing.

Underframe STL-027-1: coffee table base

STL-027-1 is designed for a coffee or side table and comes with an oval tabletop ST-027-1. The available diagram does not specify the exact dimensions and material of the base, so these need to be checked in the product card before calculating the height and delivery route.

Central placement

The base should look convincing from all sides and not interfere with legs. Unlike a wall console, the back part remains visible here.

Connection with the oval

The base must support the oval shape without random overhangs. You cannot choose a base only by approximate width.

Finished height

For a coffee table, it affects comfort next to the sofa. The height is checked against the STL-027-1 card and the 30 mm thickness.

Commercial choice

For a central table, you can choose a base for the oval tabletop and order it together with ST-027-1.

Can I use a different base

An alternative underframe is only possible after a technical check. The shape, support points, dimensions, overhangs, fasteners, and stability must be matched. Matching style or length does not confirm compatibility.

For ST-015

The base must support the long shaped surface and not create excessive overhang at the edges. The wall-side logic must be preserved.

For ST-027-1

The frame must support the oval and remain stable when accessed from all sides. A narrow central base without calculation can make the table unstable.

Mounting

You cannot drill the tabletop using the holes of a random frame without checking the thickness, inserts, and the manufacturer's diagram.

Visual proportion

Even a technically suitable base may look too small or too heavy. A full-size mockup should include not only the surface but also the frame.

MDF for opaque enamel

Both models are available in MDF. This option is chosen when the surface needs a solid covering color and the wood grain is not part of the design. MDF is convenient for complex shaped edges, but the quality of the result depends on the preparation of the ends, primer, enamel, and protection of all planes.

When MDF is especially appropriate

It is suitable for a light or colored console, furniture in exact RAL or NCS, a modern interior with a classic frame, and a project where the tabletop must match painted doors, wall panels, or furniture facades.

Why a test paint-out is mandatory

The flat top surface, shaped edge, and bottom side perceive the coating differently. The color may match, but the gloss level on the profile may differ. The sample must include all characteristic areas.

ST-015 in MDF

The shaped edge and long line are especially sensitive to the uniformity of the enamel. A run or difference in gloss will repeat along the entire console. For ordering, you can choose ST-015 in MDF with enamel.

ST-027-1 in MDF

The oval surface is visible from all sides. Therefore, the quality of the edge is important from all sides. In the card, you can choose ST-027-1 in MDF.

Limitations

MDF execution cannot be automatically considered a moisture-resistant kitchen surface. Operating conditions and compatible protective system must be clarified before ordering.

Combined option with oak veneer

The combined execution uses MDF, solid wood elements, and oak veneer. This option preserves the wood grain on the visible surface and supports the oak underframe, but is not a solid wood tabletop.

Visual character

Oak texture emphasizes the classic ST-015 profile and soft oval ST-027-1. With transparent or tinted finish, the grain becomes part of the composition.

Combination with STL-015

Oak frame and oak veneer tabletop create a clear connection. The shade still needs to be checked on samples because solid wood and veneer may absorb tint differently.

Combination with STL-027-1

Underframe material must be confirmed in the card. If the oak option is selected, the oak veneer tabletop helps assemble a unified set.

Edge finishing

The edge must be protected and coordinated with the top surface. The specific construction of veneer and solid wood is checked in the card; it cannot be assumed that the entire edge is made of solid oak.

To choose a material, it is useful to study how to choose the material for a furniture tabletop.

Combined option with beech veneer

The second confirmed combination includes MDF, solid wood elements, and beech veneer. It suits interiors where a calmer wood texture or a connection with a beech underframe is needed.

Beech surface ST-015

A long console can get a soft wood pattern and combine with beech STL-015. To order, you can choose the option with beech veneer.

Beech surface ST-027-1

The oval reveals the pattern on a wide surface. Before ordering, it is useful to choose ST-027-1 with beech veneer and with

Different expectations

A buyer looking for a solid oak slab expects a different structure. A correct description protects against errors and helps choose the appropriate finish.

Different processing

Veneer cannot be sanded like thick solid wood without control. Repair and finish renewal require careful technique.

Practical advantage of the combined scheme

It allows for complex furniture shapes and visible wood surfaces. But specific performance properties should be checked on the product card, not deduced solely from the material names.

Oak or beech in the finished interior

The choice between oak and beech veneer affects not only the surface color, but also how the tabletop connects with the base, floor, doors, and other furniture. Both options are approved for ST-015 and ST-027-1 in a combined construction with MDF and solid wood elements, so the decision should be made based on the overall project, not out of habit of choosing one species.

Oak for expressive natural texture

The oak pattern is more noticeable on the large surface ST-027-1 and complements the classic console ST-015 well. It fits next to oak doors, flooring, or the STL-015 frame. Tinting is checked on a sample because the under-table array and tabletop veneer may absorb the compound differently.

Beech for a calmer surface

Beech veneer suits furniture where the wood texture should remain subtle and not compete with the carved frame. It can connect the tabletop with a beech STL-015 or another confirmed base. The actual shade and compatibility with STL-027-1 should be verified in the product card.

The wood species cannot be chosen separately from the finish

A light transparent system, dark tinting, and opaque enamel yield different results. If the wood grain is completely covered by dense enamel, purchasing a veneered option may not provide the expected visual benefit. For a solid-color surface, it is more practical to compare MDF and the total finishing cost.

Samples are viewed next to the floor and upholstered furniture

ST-015 is evaluated near the wall, mirror, and baseboard. ST-027-1 is assessed on the carpet, next to the sofa and armchairs. The same shade may appear different in various room zones due to lighting and surrounding materials.

A single batch simplifies coordination

It is better to coordinate the tabletop and under-table simultaneously. This makes it easier to distribute shades, approve the sample, and avoid a situation where the surface is already finished and the frame must be matched from a photo.

Finishing of the shaped edge and oval end

ST-015

The shaped profile creates protrusions and concave areas. When enameling, avoid material buildup; when tinting, prevent overly dark streaks in the recesses.

ST-027-1

The oval end is visible all around. Even a small defect is noticeable from several sides, so the finish is controlled along the entire length.

Top surface

It contacts objects and must have consistent protection. The specific composition is chosen based on the material and usage scenario.

Bottom surface

It cannot be ignored. Different treatment of the top and bottom sides can affect the appearance and system stability; the exact technology is determined by the finish manufacturer.

Mounting areas

The coating must not interfere with installation. Holes, embedded parts, and contact surfaces are protected or processed according to the drawing.

Delivery route check

The countertop must not only fit in the room but also pass from the entrance to the installation site. For ST-027-1, the depth of 900 mm is critical; for ST-015, the length of 1385 mm and the shaped contour are critical.

Entrance door

Measure the clear opening without considering the open door leaf and handle. Check the possibility of rotating the part.

Corridors and staircase

Long ST-015 may not turn around on the landing. Oval ST-027-1 may not fit through the width.

Elevator

You need to know not only the width of the doors, but also the depth of the cabin, the diagonal, and packaging restrictions.

Room door

The last opening is often narrower than the entrance. If the countertop is finished, contact with the trim can damage the edge.

Lifting separately from the underframe

A kit is usually easier to bring in and assemble piece by piece, if the design allows. The assembly order should be clarified from the cards.

What to buy together with the tabletop

The main upsell here is not decorative, but constructive: each surface requires a suitable base. Also, general guides on materials and assembly are useful for the buyer to avoid confusing a furniture countertop with a kitchen one.

How not to confuse ST-015 and ST-027-1 with similar products

ST-015 and a regular rectangular tabletop

The shaped edge and connection to STL-015 make it part of a console composition. A simple rectangular slab may have a similar length, but a different overhang, profile, and attachment points.

ST-027-1 and dining table

Size 1200 × 900 mm does not confirm the purpose for multiple seats. The model is stated for a magazine or coffee table.

Furniture and kitchen countertop

ST-015 and ST-027-1 cannot be used under a sink, hob, or in constant contact with water without confirmed properties.

Veneer and solid wood

The combined option includes MDF, solid wood, and veneer. Its description must remain accurate.

Countertop and finished table

A separate surface does not automatically include the underframe, fasteners, finish, and assembly. The configuration is checked according to the card.

Practical choice for specific situations

Need a console under the mirror in the hallway

ST-015 is more suitable. Its length of 1385 mm creates a noticeable horizontal line, and its depth of 534 mm allows more passage space than a countertop with a depth of 900 mm. Before ordering, mark the position of the mirror, sockets, and the edge of the countertop on the wall.

Need a table in front of the sofa

ST-027-1 is better suited. The oval 1200 × 900 mm provides a wide surface and access from multiple sides. Check the layout on the floor and seating comfort.

Need narrow furniture behind the sofa

ST-015 can work as a console if the frame remains stable and does not obstruct the passage. The overall depth of the sofa and tabletop must be considered.

Need a table between two armchairs and the sofa

ST-027-1 creates a central point for the soft seating group. The oval shape connects multiple directions, but the underframe should not interfere with legs.

Need to design a hotel lobby

ST-015 is suitable for a wall under a mirror or panel, ST-027-1 for the central waiting area. In a commercial project, additionally check the finish, maintenance, and cleaning route.

Need an exact color to match the enamel

Choose MDF and coordinate a test paint sample. It is better to finish the frame and surface with the same system if materials and technology allow.

Visible wood grain is needed

Consider a combined option with oak or beech veneer. Do not call it solid wood and coordinate the underframe shade in advance.

You need to assemble the furniture yourself

Take the tabletop together with the recommended underframe. It's useful to read how to check the compatibility of the tabletop and frame, then check the specific product cards.

You need to replace the old tabletop

Matching external dimensions is not enough. Measure the mounting points, overhangs, base shape, and actual stability. Sometimes it's more rational to replace the set.

Mistakes when buying ST-015

Use it as a central coffee table

A depth of 534 mm may be too small for access from multiple sides. A shaped form does not compensate for a narrow surface.

Not accounting for wall outlets and switches

The console may block access or force the mirror to be shifted. Wall marking is done before ordering.

Buying without STL-015 or checking another base

A random frame may not match in shape and overhangs. A complete under-table reduces the risk.

Do not measure the passage

534 mm feels compact only against a background of 900 mm. In a narrow hallway, this is still a significant depth.

Select only by length

1385 mm is convenient under a mirror, but may not fit between doorways or pilasters.

Leaving the underside unfinished

The technology must account for all surfaces and edges. The specific finish is chosen based on the material.

Mistakes when buying ST-027-1

Placing in a too cramped area

A depth of 900 mm significantly reduces the passage. A floor layout is mandatory.

Consider the oval safe without measurements

The absence of sharp corners does not negate the maximum width. People must still be able to freely walk around the table.

Use as a wall-mounted console

Most of the depth will be inconvenient and block the room. For a wall, ST-015 is better.

Do not check the height of STL-027-1

The convenience of a coffee table depends on the finished height next to the sofa. It is not confirmed in the SEO scheme.

Call the combined option solid wood

MDF, solid wood elements, and veneer are confirmed. Correct description is important for expectations and care.

Do not check the delivery route

A width of 900 mm may not fit through a door or elevator when packaged.

Who is ST-015 suitable for

• hallway and hall with a long free wall;
• console under a wall mirror;
• area behind the sofa;
• classic interior with a carved frame;
• MDF under covering enamel;
• combined option with oak or beech veneer;
• project where a depth of 900 mm is excessive;
• hotel, salon, or restaurant for a wall composition;
• customer ordering STL-015;
• decorative surface for light, vases, clocks, and wall decor.

When it's better not to choose ST-015

• a full-sized central coffee table is needed;
• users should be able to approach the surface from all sides;
• a depth of 534 mm is insufficient for the scenario;
• the wall is shorter than 1385 mm or occupied by doors and switches;
• a kitchen work area is planned;
• the underframe has not been verified for shape and attachment.

Who ST-027-1 is suitable for

• a living room with a sofa and armchairs;
• central recreation area;
• hotel lobby and waiting area;
• compositions on a large carpet;
• a buyer who needs an oval surface 1200 × 900 mm;
• MDF with enamel finish;
• combined version with oak or beech veneer;
• project with STL-027-1 underframe;
• table for books, drinks, and decor;
• interior where furniture is visible from all sides.

When ST-027-1 is better not to choose

• the room has a narrow passage;
• the table must be placed flush against the wall;
• the depth of 900 mm interferes with the sofa or armchairs;
• a long surface for a mirror is needed;
• the delivery route does not allow the tabletop to be brought in;
• the customer is looking for a dining, kitchen, or writing table without checking the purpose.

What to Check Before Ordering

• article ST-015 or ST-027-1;
• purpose: console or coffee table;
• size 1385 × 534 × 30 or 1200 × 900 × 30 mm;
• full-size outline in the room;
• passages, sofa, armchairs, doors and baseboard;
• STL-015 or STL-027-1 underframe;
• support and attachment points;
• finished height of the set;
• MDF or combined option;
• oak or beech veneer;
• covering or transparent finish;
• treatment of the top, bottom and end surfaces;
• delivery route through doors, stairs and elevator;
• configuration and permissible load;
• current prices, availability and delivery times in the product cards;
• assembly conditions and subsequent care.

Assembly, fastening and stability check

The tabletop and underframe must function as a single piece of furniture. Even a precisely matched shape does not guarantee stability if the attachment points are chosen randomly, the overhangs are unevenly distributed, or the frame is installed on an uneven floor. Therefore, the final decision is made after cross-referencing the drawings of both product cards and a trial assembly without use.

First, check the set without final tightening

Position the tabletop on the underframe along the central axes and compare the overhangs. For ST-015, symmetry of the long side sections and the connection of the shaped edge with the carved frame are especially important. For ST-027-1, check the uniformity of the oval relative to the base on all sides.

Attachment points cannot be assigned based on a photograph

The location of the holes depends on the MDF construction, solid wood elements, veneer, and underframe. Unverified drilling near the edge can damage the surface or create a weak connection. The scheme is taken from the product card, drawing, or coordinated with the furniture manufacturer.

Fasteners must not deform the tabletop

Excessive tightening can dent the material, damage the bottom plane, or create stress in the finish. Tighten the connection evenly, controlling the surface position and ensuring no misalignment.

ST-015 is checked against the wall

After assembly, the console is placed in its intended location and stability is assessed with a normal touch on the edge. The baseboard should not push the frame so that the tabletop noticeably protrudes into the passage. If the project includes additional fixation to the wall, it is calculated separately.

ST-027-1 is checked from all sides

The coffee table must remain stable when approached from different directions. Do not rely on unconfirmed load capacity or test furniture with excessive load. Check for wobbling, floor levelness, and uniform contact of supports.

Final check after the first few days

After initial use, re-inspect the fasteners, tabletop position, and surface near connection points. If play appears, first determine the cause, rather than tightening the fasteners until the material is damaged.

Storage before assembly and care for the finished table

Before installation, the tabletop must be protected from impacts, dirt, and uneven load. Special attention is given to the shaped edges of ST-015 and the oval end of ST-027-1: they remain visible after assembly and can be damaged even before installation.

Storage on a flat support

The storage method is coordinated with the packaging and manufacturer's recommendations. The part should not rest on a random corner, protruding profile, or decorative edge. Heavy objects should not be placed on the surface.

Acclimatization before finishing

The material is allowed to adapt to workshop conditions according to the recommendations for the specific finish. Do not start finishing immediately after a sharp change in temperature or humidity if it contradicts the finishing technology.

Protecting the face side during assembly

The countertop is placed on a clean, soft surface. Sand, shavings, and fasteners under the surface can leave scratches. Protective packaging is removed only where it interferes with marking and fastening.

Care depends on the finish

Enamel, clear varnish, oil, or another confirmed system require their own products. A universal aggressive cleaner can change the gloss, color, or condition of the veneer. Spilled liquid is removed without prolonged contact with the surface.

Hot and wet items

A furniture countertop should not be perceived as an indestructible work surface. Use protective coasters under hot cups, vases, and trays unless otherwise confirmed by the finish manufacturer.

Control sample of the finish

For an individual project, it is useful to keep a swatch or a small sample with the color code, coating system, and date of work. It helps with local repairs, reordering, and selecting a base of the same shade.

How to compare two estimates, not just card prices

The price of a countertop is only part of the budget. For ST-015 and ST-027-1, you need to calculate the corresponding underframe, selected material, finish, delivery, carrying in, and assembly. If a buyer only compares two surfaces, they don't see the cost of the finished furniture.

Estimate for console ST-015

It includes the countertop, STL-015, finishing of both parts, mounting, delivery, and possible fixation to the wall. Additionally, a mirror, lights, or wall decor are only considered if they are actually part of the project.

Estimate for coffee table ST-027-1

It includes an oval countertop, STL-027-1, finish, assembly, and delivery. The carrying route can affect the organization of work more than for a narrower console.

MDF and veneer are calculated separately

You cannot compare the basic MDF of one model with the combined oak version of another and draw a conclusion about the advantage of the shape. First, choose the same level of material and finish, then compare the sets.

Cost of a mistake

An unsuitable depth cannot be fixed with paint. Therefore, a layout and room measurement often save more than searching for the minimum price of an individual part.

How to buy ST-015 or ST-027-1 at STAVROS

Start with the furniture assignment. For a wall, mirror, hallway, or area behind the sofa, open the card and check the ST-015 materials. Then add Underframe for countertop ST-015 and verify the final dimensions.

For a living room or waiting area, open the oak veneer tabletop or another confirmed ST-027-1 option, then assemble the wooden coffee table on the recommended base.

Before paying, check the material, finish, fastening, and insertion route. Ordering as a set is more convenient than random purchase because it allows you to pre-match the surface shape, frame, finish, and purpose of the furniture. For a general comparison, you can buy a furniture countertop from the catalog after checking all dimensions.

FAQ: questions about ST-015 and ST-027-1

How is ST-015 different from ST-027-1?

ST-015 is a shaped countertop 1385 × 534 × 30 mm for a wall-mounted console. ST-027-1 is an oval countertop 1200 × 900 × 30 mm for a coffee or side table.

Which model is longer?

ST-015 is 185 mm longer.

Which model is deeper?

ST-027-1 is 366 mm deeper.

Is the thickness the same?

Yes, both models have a thickness of 30 mm. This does not make them interchangeable in terms of frame and purpose.

What to choose for a hallway?

More often ST-015, because it is designed for wall placement and has a depth of 534 mm.

What to choose in front of the sofa?

ST-027-1. The oval surface 1200 × 900 mm is more convenient for the central relaxation area.

Can ST-015 be used as a coffee table?

Only after separate verification of the base and scenario. The main confirmed purpose is a wall console.

Can ST-027-1 be placed against the wall?

Physically possible, but the depth of 900 mm often blocks the passage and deprives the oval of access from several sides.

What materials are the tabletops available in?

MDF and combined options with MDF, solid wood elements, and oak or beech veneer are confirmed.

Can the veneered version be called solid wood?

No. This is a combined construction, not a solid wood slab.

What to choose for enamel?

MDF, if a smooth opaque finish is needed. The technology is confirmed by a test paint sample.

What to choose for visible wood texture?

Combined option with oak or beech veneer.

Which underframe fits ST-015?

Recommended base is STL-015 measuring 875 × 1371 × 512 mm made of beech or oak.

Which underframe fits ST-027-1?

Recommended base is STL-027-1 for a side or coffee table.

Can I use a different base?

Only after checking the shape, dimensions, support points, fastening, and stability.

How to check the space for ST-015?

Mark a length of 1385 mm on the wall, a depth of 534 mm on the floor, and account for the baseboard, doors, mirror, and outlets.

How to check the space for ST-027-1?

Make an oval template 1200 × 900 mm and check the walkways around the sofa and armchairs.

Do I need to check the delivery route?

Yes. ST-015 is critical due to its length of 1385 mm, ST-027-1 due to its width of 900 mm.

Are the models suitable for the kitchen?

They are considered as furniture tabletops for a console and coffee table, not as kitchen work surfaces.

Where to buy ST-015?

In the card, you can Buy shaped tabletop ST-015.

Where to buy ST-027-1?

In the card, you can Buy oval tabletop ST-027-1.

Result: console along the wall or oval table in the center of the room

ST-015 and ST-027-1 have the same thickness of 30 mm and a similar set of materials, but are intended for different furniture. ST-015 measuring 1385 × 534 mm forms a long wall console. ST-027-1 measuring 1200 × 900 mm creates an oval coffee or side table, accessible from all sides.

Before ordering, you need to measure not only the length but also the depth, make a full-size mockup, check passages, delivery route, and recommended underframe. MDF is chosen for covering finishes, combined options with oak or beech veneer for visible wood surfaces. A veneered structure cannot be called solid wood.

STAVROS allows you to buy a tabletop and corresponding underframe within one furniture project. This approach helps transition from a liked shape to truly convenient furniture: a console that does not block the passage, or a coffee table that works properly in front of the sofa and in the center of the lounge area.