Buy Verona stucco decor set: CPU-10-1 with central panel or CPU-10-2 with wide frame — which to choose

When you need to buy a Verona stucco decor set for a pier, a wall above a console, an area near a mirror, a fireplace, or a long living room, CPU-10-1 and CPU-10-2 are easy to compare incorrectly. Both compositions belong to the same collection, have the same height of 2300 mm, use MLD-004-MG molding and MLDPU-4U-2.1L/R corner decor. However, CPU-10-1 creates a rich vertical panel, while CPU-10-2 creates a wider and calmer architectural frame.

CPU-10-1 has dimensions of 500 × 2300 × 18 mm. Its main accent is the large central element NPU-422 measuring 877 × 250 × 18 mm. CPU-10-2 is wider: 820 × 2300 × 16 mm, but compositionally lighter because it is built as a frame with corner elements and NPU-401.1 inserts. The width of the second model is 320 mm larger, but this does not mean it should cost more.

At the time of checking the product cards, CPU-10-1 cost 26,310 rubles, and CPU-10-2 cost 9,320 rubles. Prices must be rechecked before publication and ordering. The difference is explained not by the total wall area, but by the composition of the set and the role of the large central decor. The buyer chooses not between "narrow or wide", but between an expressive panel with a subject ornament or a lightweight frame system for architectural rhythm.

Below are analyzed the compositions of the two sets, the choice for a narrow pier and an accent wall, placement above a console, chest of drawers, mirror, and fireplace, use between sconces, combination of multiple frames, wall measurement, painting, installation, joints, material consumption, errors, and the commercial purchase route on STAVROS. Unconfirmed loads, colors, timelines, and fastening options are not invented.

Buy CPU-10-1 with panelBuy CPU-10-2 with frameView Verona collection

Go to Catalog

CPU-10-1 or CPU-10-2: confirmed specifications

The table shows why models cannot be evaluated by frame area. CPU-10-1 is narrower but includes a large NPU-422 that works as an independent wall panel. CPU-10-2 is wider, however the decorative load is distributed along the contour and corners, so the composition looks calmer.

Why the narrower CPU-10-1 costs more

The cost is determined by the composition, not just the external dimensions. For CPU-10-1, the key factor is the presence of a large NPU-422 measuring 877 × 250 × 18 mm. For CPU-10-2, the wide field with corner elements and NPU-401.1 inserts is more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and precise dimensions.

In practice, this means the following: compare the full configuration and the current price in the product cards. First, do a full-size layout, then check the free fields, axes, and adjacent items. Only after that, fix the article number and the number of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Our factory also produces:

View Full Product Catalog

What do the two Verona sets have in common

Both compositions are built on MLD-004-MG and MLDPU-4U-2.1L/R. For CPU-10-1, the central hierarchy within a narrow field is key. For CPU-10-2, the frame rhythm within a wide field is more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and precise dimensions.

In practice, this means the following: use a common collection but assign different roles. First, do a full-size layout, then check the free fields, axes, and adjacent items. Only after that, fix the article number and the number of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

CPU-10-1 as a central panel

The large NPU-422 turns the frame into a complete story. For CPU-10-1, the key is to maintain a free field around the central ornament. For CPU-10-2, the key is —. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and precise dimensions.

In practice, this means the following: do not cover the panel with tall furniture and accessories. First, do a full-size layout, then check the free fields, axes, and adjacent items. Only after that, fix the article number and the number of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

CPU-10-2 as an architectural frame

A wide composition organizes the wall without imposing a central subject. For CPU-10-1, the key becomes —. For CPU-10-2, the relationship of the internal field with furniture and adjacent frames is more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and precise dimensions.

In practice, this means the following: leave a calm surface or place an object along the axis. First, make a full-size markup, then check the free fields, axes, and adjacent objects. Only after that, fix the article and the number of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

What to choose for a narrow pier

A pier requires precise checking of side fields. For CPU-10-1, the key becomes a width of 500 mm and an expressive vertical accent. For CPU-10-2, a width of 820 mm is more important, which often does not fit. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and precise dimensions.

In practice, this means the following: measure the area between trims, cabinets, corners, and switches. First, make a full-size markup, then check the free fields, axes, and adjacent objects. Only after that, fix the article and the number of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

What to choose for a wide wall

On a large wall, viewing distance and repeatability are important. For CPU-10-1, the key becomes one central accent or a rare symmetrical pair. For CPU-10-2, a series of frames with the same step is more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and precise dimensions.

In practice, this means the following: mark the entire wall, rather than starting from a random corner. First, make a full-size markup, then check the free fields, axes, and adjacent objects. Only after that, fix the article and the number of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Which set to place above the console

The frame and furniture should be perceived as a single composition. For CPU-10-1, the panel above the calm facade becomes key. For CPU-10-2, the architectural framing of the prominent console is more important. Therefore, the decision is made not based on a single photo, but on the wall elevation, furniture, and precise dimensions.

In practice, this means the following: they check the width of the tabletop, the height of accessories, and the central axis. First, they create a full-size layout, then check the free spaces, axes, and adjacent items. Only after that do they finalize the article number and quantity of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

What to choose behind the dresser

The dresser forms the lower horizontal line of the wall composition. For CPU-10-1, the accent becomes key if the facade is laconic. For CPU-10-2, the frame is more important if the furniture itself is decorative. Therefore, the decision is made not based on a single photo, but on the wall elevation, furniture, and precise dimensions.

In practice, this means the following: they avoid overlapping the lower corners and inserts. First, they create a full-size layout, then check the free spaces, axes, and adjacent items. Only after that do they finalize the article number and quantity of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Set between sconces

Wall lights enhance the relief and simultaneously limit the width. For CPU-10-1, the panel as the center between two light sources becomes key. For CPU-10-2, a calm field with a wider distance is more important. Therefore, the decision is made not based on a single photo, but on the wall elevation, furniture, and precise dimensions.

In practice, this means the following: the electrical layout is marked after the template, not before it. First, they create a full-size layout, then check the free spaces, axes, and adjacent items. Only after that do they finalize the article number and quantity of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Decor next to the mirror

The reflection visually doubles the ornament. For CPU-10-1, a rare accent on the side of the mirror becomes key. For CPU-10-2, the frame around a calmer mirror area is more important. Therefore, the decision is made not based on a single photo, but on the wall elevation, furniture, and precise dimensions.

In practice, this means the following: evaluate the composition with a real reflection. First, make a full-size layout, then check the free fields, axes, and adjacent objects. Only after that, fix the article number and the number of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Set for the fireplace area

The fireplace creates a strong central axis. For CPU-10-1, the key element is the panel on the sides or on the adjacent wall. For CPU-10-2, the wide wall framing is more important. Therefore, the decision is made not based on a single photo, but on the wall layout, furniture, and exact dimensions.

In practice, this means the following: do not mix the decorative task with the technical protection of the fireplace. First, make a full-size layout, then check the free fields, axes, and adjacent objects. Only after that, fix the article number and the number of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to design a long wall

A long plane requires a repeating step. For CPU-10-1, the key element is one main composition. For CPU-10-2, several identical frames are more important. Therefore, the decision is made not based on a single photo, but on the wall layout, furniture, and exact dimensions.

In practice, this means the following: calculate the edge fields and gaps before ordering. First, make a full-size layout, then check the free fields, axes, and adjacent objects. Only after that, fix the article number and the number of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Can models be used together

The overall collection allows for joint arrangement. For CPU-10-1, the key element is the main or rare accent. For CPU-10-2, background repeating sections are more important. Therefore, the decision is made not based on a single photo, but on the wall layout, furniture, and exact dimensions.

In practice, this means the following: maintain hierarchy, do not alternate panels randomly. First, make a full-size layout, then check the free fields, axes, and adjacent objects. Only after that, fix the article number and the number of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How many sets are needed

The quantity depends on the wall width and gaps. For CPU-10-1, the key is one, a pair, or rare accents. For CPU-10-2, a series of several frames is more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and exact dimensions.

In practice, this means the following: a layout with doors, furniture, and electrical points is built. First, a full-size marking is made, then free fields, axes, and adjacent objects are checked. Only after that, the article and number of sets are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to choose the width 500 or 820 mm

Geometric width and visual saturation do not match. For CPU-10-1, a narrow but subject-specific composition becomes key. For CPU-10-2, a wide but calmer composition is more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and exact dimensions.

In practice, this means the following: two full-size rectangles on the wall are compared. First, a full-size marking is made, then free fields, axes, and adjacent objects are checked. Only after that, the article and number of sets are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to make a 1:1 template

A full-size mock-up shows the scale better than a visualization. For CPU-10-1, the key is the 500 × 2300 mm outline plus the position of NPU-422. For CPU-10-2, the 820 × 2300 mm outline and the internal field are more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and exact dimensions.

In practice, this means the following: they look during the day, in the evening, and from the main points of the room. First, a full-size marking is made, then free fields, axes, and adjacent objects are checked. Only after that, the article and number of sets are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to account for baseboard and cornice

The net wall height is less than the total. For CPU-10-1, the lower and upper boundaries of the panel become key. For CPU-10-2, the lower and upper sides of the frame are more important. Therefore, the decision is made not from a single photo, but from a wall, furniture, and precise dimensions layout.

In practice, this means the following: subtract the baseboard, cornice, and technological gaps. First, make a full-size layout, then check free fields, axes, and adjacent objects. Only after that, the SKU and number of kits are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to account for doors and architraves

Adjacent verticals can compress the composition. For CPU-10-1, the free fields of a narrow wall section become key. For CPU-10-2, sufficient width for a 820 mm frame is more important. Therefore, the decision is made not from a single photo, but from a wall, furniture, and precise dimensions layout.

In practice, this means the following: apply door swing and architrave thickness. First, make a full-size layout, then check free fields, axes, and adjacent objects. Only after that, the SKU and number of kits are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to account for sockets and switches

Electrical wiring should not fall on the molding or decor. For CPU-10-1, coordinates relative to NPU-422 become key. For CPU-10-2, coordinates relative to the vertical side of the frame are more important. Therefore, the decision is made not from a single photo, but from a wall, furniture, and precise dimensions layout.

In practice, this means the following: move points before installation or change the layout. First, make a full-size layout, then check free fields, axes, and adjacent objects. Only after that, the SKU and number of kits are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Materials: polyurethane and primed MDF

Different materials should look like a single set. For CPU-10-1, preparation of the large central element becomes key. For CPU-10-2, uniform preparation of the molding and inserts is more important. Therefore, the decision is made not from a single photo, but from a wall, furniture, and precise dimensions layout.

In practice, this means the following: select compatible materials for installation and painting. First, make a full-size layout, then check free fields, axes, and adjacent objects. Only after that, the SKU and number of kits are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to choose a color

Color changes the contrast and readability of the relief. For CPU-10-1, monochrome makes the panel softer, contrast enhances NPU-422. For CPU-10-2, monochrome emphasizes the architecture, contrast makes the frame more graphic. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and exact dimensions.

In practice, this means the following: a test swatch is made under working lighting. First, a full-size layout is made, then free fields, axes, and adjacent objects are checked. Only after that, the article number and number of sets are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Painting Before or After Installation

The sequence affects joints and coating integrity. For CPU-10-1, protecting the relief during installation becomes key. For CPU-10-2, preparing long connections and corners is more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and exact dimensions.

In practice, this means the following: first, the geometry is checked, then the finish is agreed upon. First, a full-size layout is made, then free fields, axes, and adjacent objects are checked. Only after that, the article number and number of sets are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Installation without visible joints

The quality of the finished wall is determined not only by details but also by connections. For CPU-10-1, the precise position of the panel within the frame becomes key. For CPU-10-2, diagonals and corners of a wide composition are more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and exact dimensions.

In practice, this means the following: use the installation guide and materials for the specific base. First, a full-size layout is made, then free fields, axes, and adjacent objects are checked. Only after that, the article number and number of sets are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

CPU-10-1 in the hallway

The entrance area often has narrow walls and a lot of electrical wiring. For CPU-10-1, a vertical panel above the console becomes key. For CPU-10-2, a frame on a wide free wall is more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and exact dimensions.

In practice, this means the following: take into account the door, cabinet, intercom, and passage. First, a full-size layout is made, then free fields, axes, and adjacent objects are checked. Only after that, the article number and number of sets are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

CPU-10-2 in the living room

The living room allows you to see the rhythm from a distance. For CPU-10-1, the key element is the central panel near the fireplace or console. For CPU-10-2, the series behind the armchairs, sofa, or along the wall is more important. Therefore, the decision is made not based on a single photo, but on the wall layout, furniture, and precise dimensions.

In practice, this means the following: the lower corners are not hidden by furniture. First, a full-size layout is made, then the free fields, axes, and adjacent objects are checked. Only after that, the article and number of sets are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Verona in the bedroom

In the bedroom, soft evening light is important. For CPU-10-1, the key element is the panel above the dressing table or between the sconces. For CPU-10-2, the frame behind the chest of drawers or armchair is more important. Therefore, the decision is made not based on a single photo, but on the wall layout, furniture, and precise dimensions.

In practice, this means the following: shadows and furniture height are checked. First, a full-size layout is made, then the free fields, axes, and adjacent objects are checked. Only after that, the article and number of sets are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Verona in a commercial interior

A restaurant, hotel, and reception desk require a systematic layout. For CPU-10-1, the key element is the accent in the key zone. For CPU-10-2, the repeating rhythm of a long corridor or hall is more important. Therefore, the decision is made not based on a single photo, but on the wall layout, furniture, and precise dimensions.

In practice, this means the following: professional installation and durable finishing are planned. First, a full-size layout is made, then the free fields, axes, and adjacent objects are checked. Only after that, the article and number of sets are fixed.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to store the set

Before installation, parts must be protected from impacts and tangling. For CPU-10-1, separate marking of NPU-422 becomes key. For CPU-10-2, marking of corners and inserts is more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and precise dimensions.

In practice, this means the following: long elements are stored with uniform support. First, a full-size layout is made, then free fields, axes, and adjacent objects are checked. Only after that, the article number and number of kits are recorded.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to accept a kit

Completeness is checked before cutting and painting. For CPU-10-1, the central panel and moldings are inspected. For CPU-10-2, corners, molding, and NPU-401.1 are checked. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and precise dimensions.

In practice, this means the following: damage is recorded before work begins. First, a full-size layout is made, then free fields, axes, and adjacent objects are checked. Only after that, the article number and number of kits are recorded.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to calculate the budget

The cost of a finished wall is higher than the price of the card. For CPU-10-1, one expensive central accent is possible. For CPU-10-2, for a long wall, several cheaper frames may be needed. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and precise dimensions.

In practice, this means the following: kits, installation, materials, and painting are calculated. First, a full-size layout is made, then free fields, axes, and adjacent objects are checked. Only after that, the article number and number of kits are recorded.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to prepare a request for a manager

Accurate initial information speeds up selection. For CPU-10-1, the article number, quantity, and position of NPU-422 become key. For CPU-10-2, the article number, number of frames, and step are more important. Therefore, the decision is made not based on a single photo, but on a wall layout, furniture, and precise dimensions.

In practice, this means the following: a photo and wall layout are attached. First, a full-size layout is made, then free fields, axes, and adjacent objects are checked. Only after that, the article number and number of kits are recorded.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

How to care for painted stucco

Care depends on the finish coating. For CPU-10-1, dust in the deep relief of the central decor is key. For CPU-10-2, dust in the corners and along the contour is more important. Therefore, the decision is made not based on a single photo, but on a scan of the wall, furniture, and precise dimensions.

In practice, this means the following: use gentle cleaning without unconfirmed aggressive agents. First, perform a full-size markup, then check free fields, axes, and adjacent objects. Only after that, record the article number and number of sets.

The same height of 2300 mm helps to combine models in one collection, but the width, saturation, and main decorative accent remain different. If the role of each composition is not predetermined, the wall looks random.

Direct comparison of scenarios

What to buy together with the Verona kit

Before expanding the project, it is useful to learn how to choose a ready-made set of stucco wall decor. For frame logic, a separate material will be useful on how to choose a ready-made frame from moldings.

How not to confuse a set with a separate molding

CPU-10-1 and CPU-10-2 are ready-made composite kits, not a single profile without layout. They come with pre-connected moldings, corners, and decorative inserts. The buyer receives the base for a specific frame, but still performs marking, installation, joint preparation, and painting.

A separate molding is needed for a fully custom project. A ready-made kit reduces the risk of accidentally mismatching profiles and corners. If the standard size fits, Verona speeds up selection and makes the specification clearer.

For installation, it is helpful to read in advance how to install moldings without visible joints. The guide does not replace an assessment of a specific wall, but helps to properly plan the sequence of work.

How not to confuse CPU-10-1 and CPU-10-2

The order specifies the full article number, size, and main accent. CPU-10-1 — 500 × 2300 × 18 mm and NPU-422. CPU-10-2 — 820 × 2300 × 16 mm and NPU-401.1 inserts. The single word Verona is not enough.

Before payment, check the link and composition. After delivery, verify the marking of all parts before installation. Do not transfer the layout of one model to another or consider the same height as proof of interchangeability.

If a mixed wall is planned, mark each kit on the elevation. The installer must understand where the main accent is and where the repeated frames are.

Mistakes when buying CPU-10-1

Choosing CPU-10-1 only because of the high price

Price does not make the panel suitable for any wall. A narrow area and a real task for NPU-422 are needed. The solution is to go back to the wall layout, check the dimensions, and open the specific kit card before payment.

Installing the panel on a wall that is too wide without support

A single composition may get lost. A pair, adjacent frames, or a different scale is needed. The solution is to go back to the wall layout, check the dimensions, and open the specific kit card before payment.

Blocking NPU-422 with furniture

The main element stops being readable. The height of the console and accessories is checked with a template. The solution is to go back to the wall layout, check the dimensions, and open the specific kit card before payment.

Installing between ready-made sconces

There may not be enough free width. First, mark the panel, then the electrical work. The solution is to go back to the wall layout, check the dimensions, and open the specific kit card before payment.

Repeating too many CPU-10-1

The wall becomes overloaded. It is better to use the panel as a rare accent. The solution is to go back to the wall layout, check the dimensions, and open the specific kit card before payment.

Mistakes when buying CPU-10-2

Considering a wide frame as more saturated

CPU-10-2 is wider but compositionally lighter. The choice depends on the wall's function. Solution — evaluate the inner field of the frame, furniture, and the entire repeating rhythm before ordering.

Not calculating the entire series

The last frame doesn't fit, and the edge fields differ. Solution — evaluate the inner field of the frame, furniture, and the entire repeating rhythm before ordering.

Placing too narrow furniture inside the frame

Furniture gets lost in a large field. Proportion check is needed. Solution — evaluate the inner field of the frame, furniture, and the entire repeating rhythm before ordering.

Overlapping corner decor

Tall accessories and furniture make the composition cropped. Solution — evaluate the inner field of the frame, furniture, and the entire repeating rhythm before ordering.

Buying CPU-10-2 only because it's cheaper

A low price does not replace a central panel if the project requires it. The solution is to evaluate the inner field of the frame, the furniture, and the entire repeating rhythm before ordering.

Who is CPU-10-1 suitable for

CPU-10-1 is suitable for a buyer who needs an expressive central ornament on a narrow wall section or above a console. It fits between sconces, beside a mirror, in a fireplace area, and as the main accent in a hallway.

The set is especially useful when the wall needs a finished panel rather than just frame divisions. The width of 500 mm makes it easier to work with a limited field, but there should be indents around it.

CPU-10-1 may not be suitable for a long wall with many repeating sections. A large number of NPU-422 overloads the composition.

Who is CPU-10-2 suitable for

CPU-10-2 is suitable for a wide accent wall, the area behind a chest or console, a series of identical frames, and rhythmic decoration of a living room, bedroom, restaurant, or hotel.

The set is convenient when you need to leave a calm field inside the frame or place furniture. The width of 820 mm requires precise measurement and coordination with adjacent sections.

CPU-10-2 may not be suitable for a narrow wall section or a situation where an independent central ornament is needed. In this case, CPU-10-1 is more expressive.

How to buy CPU-10-1 or CPU-10-2 at STAVROS

First, determine the role of the wall. For the central panel and narrow pier, open the CPU-10-1 set with NPU-422 decor. For the wide frame and series of panels — a Verona frame 820 mm wide. Then make a template and apply furniture, lighting, and electrical fixtures.

Check the composition and current price. The data 26,310 and 9,320 rubles refer to the time of preparing the diagram and may change. Confirm availability, lead time, and configuration in the product card.

If the standard composition does not fit, you can Choose ready-made stucco wall decor or View decorative elements for moldingsVisual scenarios give pages Verona ideas with CPU-10-1 и Verona interior composition with CPU-10-2.

Pre-order checklist

FAQ: CPU-10-1 or CPU-10-2

1. How does CPU-10-1 differ from CPU-10-2?

CPU-10-1 has a width of 500 mm and a large central NPU-422. CPU-10-2 is wider — 820 mm — and works as a calmer frame with NPU-401.1 inserts.

2. What is the height of the kits?

Both models have a height of 2300 mm.

3. Why is CPU-10-1 more expensive?

The price depends on the composition. CPU-10-1 includes a large central decor NPU-422.

4. What is the current price?

The SEO scheme recorded 26,310 ₽ and 9,320 ₽ at the time of verification. Prices are rechecked before ordering.

5. What to choose for a narrow pier?

More often CPU-10-1 with a width of 500 mm, if there are free fields around.

6. What to choose for a long wall?

CPU-10-2 is more convenient for a series of identical wide frames.

7. Which kit is better above the console?

CPU-10-1 creates a panel, CPU-10-2 frames the furniture area.

8. Can the kits be used together?

Yes. CPU-10-1 is made the main accent, CPU-10-2 is a repeating background.

9. What is included in CPU-10-1?

MLD-004-MG, MLDPU-4U-2.1L/R, and large NPU-422 are confirmed.

10. What is included in CPU-10-2?

MLD-004-MG, MLDPU-4U-2.1L/R, and NPU-401.1 inserts are confirmed.

11. What materials are the kits made of?

Polyurethane and primed MDF.

12. Can it be painted to match the wall color?

The painting system is coordinated with the kit materials and selected compositions; a test coat is done.

13. Where to place CPU-10-1?

On a wall pier, above a console, between sconces, near a mirror, or in a fireplace area.

14. Where to place CPU-10-2?

On a wide accent wall, behind a chest of drawers, or in a series of frames.

15. How many sets are needed?

The quantity is calculated based on the wall layout, considering gaps and furniture.

16. Can the set be trimmed?

Without a diagram and confirmation, it cannot be done: angles and proportions may be compromised.

17. How to choose glue?

Based on the materials of the parts and the wall base; a universal composition cannot be recommended without testing.

18. How to hide joints?

Use correct marking, joint preparation, and final painting according to installation technology.

19. Where to buy CPU-10-1?

In the Verona CPU-10-1 kit card on the STAVROS website.

20. Where to buy CPU-10-2?

In the Verona CPU-10-2 wide frame card.

21. Where to see ideas?

On pages INTPU-031 and INTPU-030.

22. What to do if both sizes don't fit?

Open the general section of wall decor or decorative elements for moldings.

Result: CPU-10-1 with panel or CPU-10-2 with frame

CPU-10-1 and CPU-10-2 have the same height of 2300 mm and belong to the Verona collection, but perform different roles. CPU-10-1 with a width of 500 mm is a rich vertical panel with a large NPU-422. CPU-10-2 with a width of 820 mm is a lighter architectural frame with corner elements and NPU-401.1 inserts.

CPU-10-1 is chosen for a narrow wall section, a wall above a console, the area between sconces, next to a mirror or fireplace. CPU-10-2 is for a wide accent wall, a series of frames, the area behind a chest of drawers, and rhythmic room decoration. The larger size does not determine the price: the composition matters.

Before ordering, make a template, measure furniture, baseboard, cornice, and electrical fixtures, select the number of sets, and double-check the current price. On STAVROS you can choose the Verona panel 500 × 2300 mm, choose CPU-10-2 for an accent wall or view the entire Verona collection.

New apartment without furniture

First, mark the walls, then select furniture based on the inner field of the frame. CPU-10-1 sets the central axis, CPU-10-2 helps build repeatable sections. The buyer checks not only the decorative look but also the actual dimensions, wall access, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Ready interior with furniture

The dimensions of the dresser, console, and sconce are already fixed, so the set is selected based on the remaining field. An error of 320 mm in width becomes critical. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Renovation without moving electrical wiring

Switches and sconces limit the layout. CPU-10-1 is easier to place between existing points, CPU-10-2 requires a wider free zone. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Wall with a door in the center

On either side of the door, you can use identical CPU-10-2 or accent CPU-10-1 if the wall sections are symmetrical. Dimensions are checked separately for each side. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

TV wall

The decor should not fall behind the screen or conflict with cables. CPU-10-2 can form calm side frames, CPU-10-1 can form a separate accent outside the equipment area. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Composition behind the chair

CPU-10-2 better frames the furniture, while CPU-10-1 creates a panel above it. The height of the backrest and the lamp is applied to the template. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Reception area

CPU-10-1 highlights a logo or central point, CPU-10-2 creates a rhythm along the long wall. The finish is coordinated with intensive use. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Hotel corridor

Repeatable CPU-10-2 better maintain the navigation rhythm. CPU-10-1 are used near the elevator hall or at the end of a perspective. The buyer checks not only the decorative appearance, but also the actual dimensions, wall access, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Restaurant hall

CPU-10-2 helps divide a long wall into sections, CPU-10-1 highlights a separate niche or central axis. The buyer checks not only the decorative appearance, but also the actual dimensions, wall access, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Mixed composition

One CPU-10-1 can stand in the center, two CPU-10-2 on the sides. The same height ties the system together, but the gaps are calculated in advance. The buyer checks not only the decorative appearance, but also the actual dimensions, wall access, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

New apartment without furniture

First, mark the walls, then select furniture based on the inner field of the frame. CPU-10-1 sets the central axis, CPU-10-2 helps build repeatable sections. The buyer checks not only the decorative look but also the actual dimensions, wall access, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Ready interior with furniture

The dimensions of the dresser, console, and sconce are already fixed, so the set is selected based on the remaining field. An error of 320 mm in width becomes critical. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Renovation without moving electrical wiring

Switches and sconces limit the layout. CPU-10-1 is easier to place between existing points, CPU-10-2 requires a wider free zone. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Wall with a door in the center

On either side of the door, you can use identical CPU-10-2 or accent CPU-10-1 if the wall sections are symmetrical. Dimensions are checked separately for each side. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

TV wall

The decor should not fall behind the screen or conflict with cables. CPU-10-2 can form calm side frames, CPU-10-1 can form a separate accent outside the equipment area. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Composition behind the chair

CPU-10-2 better frames the furniture, while CPU-10-1 creates a panel above it. The height of the backrest and the lamp is applied to the template. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Reception area

CPU-10-1 highlights a logo or central point, CPU-10-2 creates a rhythm along the long wall. The finish is coordinated with intensive use. The buyer checks not only the decorative appearance, but also the actual dimensions, access to the wall, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.

Hotel corridor

Repeatable CPU-10-2 better maintain the navigation rhythm. CPU-10-1 are used near the elevator hall or at the end of a perspective. The buyer checks not only the decorative appearance, but also the actual dimensions, wall access, installation sequence, and future painting.

In such a situation, it is useful to take a strictly frontal photo of the wall, mark axes and dimensions, and then compare both SKUs. This prevents purchasing a set that formally fits but does not work in the composition.

The commercial conclusion remains the same: CPU-10-1 is bought for the central panel, CPU-10-2 for the wide frame structure. Price and width are considered only after determining this role.