Buy a large wooden mirror frame: openwork RM-056 1873 × 1273 mm from pine or carved RM-047 1500 × 883 mm from beech and oak — which to choose

Two large rectangular frames with different scale, ornament, and finishing logic — for a full-length mirror, wall above furniture, hall, bedroom, and commercial interior

Mirror Frame RM-018

from 1,445.58 $

Mirror frame RM-016

from 1,549.03 $

Mirror Frame RM-020

from 750.12 $

Mirror Frame RM-014

from 1,255.16 $

Mirror frame RM-002

from 1,352.38 $

Mirror Frame RM-008

from 812.21 $

Mirror frame RM-010

from 844.42 $

RM-017 Mirror Frame

from 1,835.95 $

Go to Catalog

RM-056 or RM-047: short answer before ordering

RM-056 is worth buying when you need a maximum large openwork frame with a height of 1873 mm and a width of 1273 mm, which will become the main decorative object of the wall. It is made of finger-jointed pine array without knots, has a wide openwork belt of 240 mm, "Prestige" sanding, and is primarily designed for opaque enamel. RM-047 is better to choose for a more compact composition above a console, chest of drawers, or in a separate niche. Size 1500 × 883 × 44 mm is easier to fit into a bedroom, study, and hallway; beech is suitable for enamel, oak for tinting while preserving wood texture. For RM-047, you can choose "Standard" or "Prestige" sanding.

RM-056 is 373 mm higher and 390 mm wider. Its outer rectangle area is approximately 1.8 times larger. Therefore, the choice cannot be made from a photo: first, you need to mark the outer contour on the wall, check the ceiling height, distance to the floor and furniture, delivery route, wall construction, mounting, and the exact size of the mirror panel. The mirror completeness, weight of the finished structure, and fasteners should be confirmed in the product card and project — these parameters cannot be determined by the external dimensions of the frame.

Buy large openwork frame RM-056 Buy carved frame RM-047 made of beech or oak to buy a mirror frame

RM-056: 1873 × 1273 × 44 mm; decorative belt 240 mm; pine; finger-jointed array without knots; "Prestige" sanding; preparation for enamel.

RM-047: 1500 × 883 × 44 mm; beech or oak; "Standard" or "Prestige" sanding; beech for enamel, oak for tinting.

Main fork: maximum scale and openwork geometric silhouette or a more universal size and the ability to preserve the oak texture.

Do not calculate the mirror surface by simply subtracting the width of the decor: the exact inner contour, fit, and completeness must be checked against the drawing and the card.

Buying a large wooden frame for a mirror is more difficult than choosing a regular border by color. A large format affects the entire wall: it changes the proportions of the pier, competes with furniture, requires a delivery route and reliable fastening. An error of 300–400 mm no longer looks like a minor inaccuracy — the frame may not fit between doors, be wider than a dresser, or rise too close to the ceiling cornice.

RM-056 and RM-047 share a rectangular shape and a height sufficient for a noticeable wall mirror. The similarity ends there. RM-056 is an almost full-length openwork composition made of pine for enamel. Its decorative strip 240 mm wide is perceived as an independent architecture, not as a thin border around the glass. RM-047 is more compact, has a classic carved character, and offers a choice between beech and oak.

The buyer chooses not only the size but also the way the frame will fit into the interior. White, graphite, or colored RM-056 can become the central object of a hall, dressing room, salon, or formal living room. Oak RM-047 is more easily associated with doors, a console, a dresser, baseboards, and furniture when it is important to keep the natural texture visible.

A broad query covers better Catalog of wooden frames, and this article helps choose the exact pair. After comparing scale, wall, and finish, you can go to the specific model's card, check current conditions, and order a frame without random selection from a single photo.

Watch video ...

Why this is not just two rectangular frames

A rectangle by itself says nothing about visual weight. A frame 1873 × 1273 mm with a wide openwork border and a frame 1500 × 883 mm with classic carving occupy the wall differently. The first builds a large decorative silhouette, the second becomes a lighter part of the furniture ensemble.

Our factory also produces:

Mirror frame RM-047

from 979.82 $

Mirror frame RM-026

from 1,078.27 $

Mirror Frame RM-009

from 1,231.61 $

Mirror Frame RM-019

from 1,024.84 $

Mirror Frame RM-007

from 716.94 $

Mirror frame RM-012

from 1,007.76 $

Mirror Frame RM-013

from 1,569.40 $

Mirror Frame RM-056

from 500.77 $

View Full Product Catalog

RM-056 works as an architectural panel

Its width of 1273 mm is comparable to a large wall section. The openwork edge creates additional chiaroscuro and requires free space around it. If you place a tall cabinet or heavy drapes nearby, part of the silhouette will be lost.

RM-047 works as a carved frame

A width of 883 mm allows the frame to be placed above furniture and between sconces. It remains noticeable but does not take over the entire wall. The classic pattern is easier to connect with wooden facades, moldings, and doors.

Different material logic

Pine RM-056 is primarily prepared for opaque enamel: color becomes the main integration tool. RM-047 allows choosing beech for the same painting or oak for tinting and visible texture. Therefore, the question 'pine or oak' actually means 'colored architectural form or natural wooden frame'.

Different review scenario

RM-056 is designed to be perceived from a distance. It is appropriate to see it from the depth of a hall, staircase landing, or showroom. RM-047 works well in closer view — above a dresser, console, or in a bedroom.

Confirmed specifications of RM-056 and RM-047

The table shows why the choice cannot be reduced to the formula "more or less." RM-056 differs not only in height and width, but also in wood species, finishing method, sanding, and edge character. RM-047 is smaller, but offers a material fork: beech under enamel or oak under tinting.

RM-056: large openwork frame for the main wall

RM-056 is chosen not as a neutral border, but as an independent object. The external size of 1873 × 1273 mm makes it noticeable even in a spacious room, and the decorative belt 240 mm wide forms its own wall pattern. Such a frame can replace a separate panel, but requires a calm environment and precise marking.

Height 1873 mm and full-length scenario

Almost 1.9 m along the outer contour allows RM-056 to be used in an area where a person should see themselves at full height, if the internal size of the mirror surface and installation height confirm this. The word "full-length" does not mean the frame can be placed at any height: you need to consider the internal light size, user height, distance to the floor, and viewing angle.

Width 1273 mm

The width requires a free wall section. The frame should not cover switches, sockets, trims, wall sconces, or the opening of adjacent doors. The openwork edge is especially sensitive to tight surroundings: if it is blocked by a cabinet or curtain, part of the artistic effect is lost.

Decorative belt 240 mm

The wide frame occupies a significant portion of the external area. Therefore, RM-056 cannot be selected based on the intended mirror size without checking the inner contour. Simply subtracting 240 mm from each side may be incorrect due to the shape of the openwork pattern, the seating quarter, and design features.

Finger-jointed pine array without knots

Such material is logical for covering finishes: the surface should not display random knots, and the geometric pattern is read through shape and shadow. Pine does not need to be positioned as a replacement for tinted oak. Its advantage here is preparing a large openwork form for white, colored, or dark enamel.

Only 'Prestige' sanding

RM-056 has no fork between two levels of preparation. This is important for order calculation: the customer receives the model in the confirmed 'Prestige' option, rather than choosing a simpler level. However, the final preparation for a specific enamel and processing of installation sites will still be coordinated with the finishing technology.

White and cream enamel

Light RM-056 emphasizes the openwork silhouette and makes a large size visually lighter. On a white wall, the frame can work through shadow; on a colored wall, it creates contrast. It is necessary to check whether the relief disappears under frontal uniform lighting.

Black and graphite enamel

The dark color enhances the outer contour and makes the frame more graphic. In a small room, this option may appear heavier than the light one. On a wide wall of a hall or showroom, a dark RM-056 can become a strong focal point, especially opposite a light floor or window.

Individual color

The color is chosen based on a real sample, not just from the screen. The large area of the openwork belt reflects light differently: protrusions appear lighter, recesses darker. The enamel code must be coordinated with the wall, doors, furniture, and room lighting.

For a wall where the mirror should become the main object, you can choose the RM-056 frame made of pine and check its external dimensions, preparation, and current ordering conditions.

RM-047: carved frame for furniture and natural wood

RM-047 is smaller but not small. The size of 1500 × 883 mm remains a large wall format that reads well above a console, a wide chest of drawers, in the bedroom, and in the study. The main advantage of the model is the choice of material and finish: beech under enamel or oak under tinting.

Height 1500 mm

One and a half meters allow for a noticeable mirror without taking up almost the entire wall height. The frame is easier to place above furniture if the room height and composition allow it. It is also suitable for a separate wall section where RM-056 would be too tall.

Width 883 mm

This size is easier to coordinate with a console and chest of drawers. The frame can be narrower than the furniture, match its central part, or extend slightly beyond it — the final decision is checked with a mockup. It is important to avoid an accidental difference of a few centimeters when the frame almost matches the furniture but looks like a measurement error.

Thickness 44 mm

Both models have a confirmed thickness of 44 mm, but this does not mean the same back construction and mounting. The profile, mirror seating, and fasteners may differ. Drawings should be compared, not just the third digit of the size.

Beech for enamel

Beech RM-047 is suitable for painted furniture, doors, and panels. White or colored enamel unites the frame with the facades, while the classic carving remains noticeable due to light and shadow. Thick layers of primer and paint should not smooth out the pattern.

Oak for tinting

The oak version retains the natural texture and suits interiors where oak doors, a chest of drawers, a console, baseboard, or wall panels are already present. The color on the carved profile appears deeper than on a flat board, so a test coat should be done on a relief sample.

"Standard" or "Prestige"

RM-047 allows you to choose the level of sanding. Exact differences should be checked against current STAVROS rules. Practically, the decision depends on who performs the final finishing, what finish is planned, and how closely the frame will be viewed.

Classic carved character

RM-047 is easier to incorporate into a furniture ensemble than the large geometric RM-056. It can support carved facades, moldings, paneled doors, and traditional furniture forms. But the adjacent decor should not repeat too many active motifs at once.

For a bedroom, study, or wall above furniture, you can choose RM-047 in size 1500 × 883 mm in beech or oak.

Direct comparison of RM-056 and RM-047

The difference of 373 and 390 mm: why it changes the entire wall

On the drawing, 373 mm in height and 390 mm in width may seem like a moderate difference. In the interior, this is almost forty centimeters in each direction. RM-056 requires more free space on the left, right, top, and bottom, and its outer rectangle is approximately 1.8 times larger.

Wall section between doors

If the free wall width is about 1300–1400 mm, RM-056 may fit tightly and lose its openwork airiness at the edges. RM-047 will leave more free wall space and align more easily with architraves. Exact offsets are not set universally — they are checked against the actual architecture.

Low ceiling

A height of 1873 mm including the distance to the floor may bring the top of RM-056 close to the cornice or ceiling. RM-047 leaves more space. However, placing a smaller frame too high also impairs the mirror's functionality.

Wall above furniture

A chest of drawers or console takes up part of the height. If RM-056 is placed above the countertop, the top edge may end up too close to the ceiling. RM-047 is easier to assemble into a vertical composition of "furniture — free gap — frame."

View from a distance

A large frame opens up in a hall or spacious room. In a narrow bedroom, a person sees it almost up close, and the openwork border may dominate. The more compact RM-047 retains the carved character without such pressure on the space.

How to measure a wall for a large frame

Proper measurement starts not with a single wall width. You need to record the outer rectangle of the frame, furniture, doors, electrical points, baseboard, cornice, sconces, and traffic path. For RM-056, a full-size mockup is especially useful.

Mark the outer contour

Use painter's tape to mark a rectangle of 1873 × 1273 mm on the wall and, if possible, 1500 × 883 mm next to it. Do not draw only the center line. The buyer should see the entire area the frame will occupy.

Add furniture

If the mirror will be above a console or chest of drawers, mark their actual height and width. Check if the axes align. The frame does not have to match the furniture, but the difference should look intentional.

Check the doors

Open the doors fully. The handle, panel, and casing must not collide with the frame. The openwork edge RM-056 requires extra caution: the protruding pattern cannot be placed in the door strike zone.

Check the sconces and switches

Wall lights must be at the agreed height and not overlap the ornament. Switches and sockets cannot be covered by the frame. If electrical points are already installed, the model choice may be determined precisely by the available width.

Evaluate the reflection

The marking shows only the frame. Stand opposite and imagine the inner mirror: what will it reflect — a window, door, cabinet, passage, or a calm wall. A large frame amplifies both the useful and the unfortunate reflection.

Photograph the layout

A photo from the room entrance helps see proportions better than a close-up look. Compare two outlines on the same photograph. This makes it clear whether the maximal RM-056 or a calmer RM-047 is needed.

External size, light opening size, and mirror panel

The main technical mistake when buying a frame is taking the external dimension as the mirror size. The values 1873 × 1273 mm and 1500 × 883 mm describe the external outline of the products. The panel is installed inside, so its size depends on the fit, internal opening, quarter depth, and fixing method.

Why you cannot simply subtract the profile width

For RM-056, a 240 mm decorative belt is confirmed, but the openwork edge may have complex geometry. The number 240 mm does not necessarily equal the constant width of the seating zone along the entire perimeter. For RM-047, the exact frame width is not specified in the diagram. Therefore, the formula "outer dimension minus two frame widths" is not a safe basis for ordering glass.

What is the light size

This is the visible part of the mirror after installation in the frame. It may differ from the full size of the panel because the edge of the glass enters the seat and is overlapped by the profile. For functionality, the visible field is important, while for production, the full size and thickness of the glass are important.

Get a template or drawing

The mirror panel is ordered after checking the frame or the official drawing of the seating contour. For the complex RM-056, an accurate template is especially important. An error of a few millimeters can make the glass too large or leave a noticeable gap.

Completeness is checked separately

The name "mirror frame" does not confirm that the mirror panel, back panel, fasteners, and hanger are included in the specific package. Before payment, you need to open the product card and clarify what exactly is supplied. In the article, you cannot automatically turn a frame into a finished mirror.

Safe edge processing

The type of mirror processing, thickness, and protective solutions are chosen by the panel manufacturer and the installation organization. These parameters depend on the size, installation method, and room. They cannot be assigned solely based on the wooden frame article number.

Assembly before or after finishing

The order depends on the design. Sometimes the frame is painted first, then the mirror is installed; in another project, a trial assembly is needed before finishing. The main thing is not to order glass or drill the wall until the fit is confirmed.

How to check the delivery route

RM-056 may fit on the wall but still not pass through a staircase, elevator, or corridor turn. The outer rectangle 1873 × 1273 mm must be checked along the entire path from unloading to the installation site. RM-047 is more compact but also belongs to large items.

Doorways

Measure the clear width and height considering trim, handles, and door closers. A large frame is often carried at an angle, so simply comparing the width of the item and the opening is not enough. You need to know the available diagonal and the space to the next wall.

Corridor turns

A narrow L-shaped corridor can stop an item that freely passed through the front door. Draw a rectangle on cardboard at a reduced scale or simulate the turn using exact dimensions.

Elevator

Check the doorway, height, and diagonal of the cabin. A freight elevator may have a wide entrance but insufficient depth for turning. You cannot rely solely on the rated load capacity.

Stairs

The width of the flight, landing, railings, low ceiling, and turn are important. The openwork RM-056 needs protection from impacts on its decorative edge. Stair climbing is planned before delivery.

Furniture in the room

Even after entering the room, the frame needs to be turned in front of the wall. A large table, bed, rack, or cabinet may leave no room for maneuvering. Sometimes it is wise to perform installation before the final furniture arrangement.

Packaging increases dimensions

The route is checked not only by the clean size of the product. Protective packaging adds thickness and width. Removing it in the hallway to pass is dangerous for carved and openwork decor.

How to choose the installation height

There is no ready-made universal number from the floor. The height depends on the internal mirror field, user height, furniture, baseboard, and task. A full-length mirror, a mirror above a console, and a decorative mirror in the hall are installed according to different logic.

Full-length option

You need to see the entire figure, not just install the outer frame almost from the floor. The lower and upper edges of the visible mirror are checked against users of different heights. RM-056 is preliminarily better suited, but the final decision depends on the light size.

Above the console

A visually clear gap is left between the countertop and the frame. Too small a distance creates the feeling that the frame is resting on the furniture and makes cleaning difficult. Too large a gap breaks the composition. RM-047 is usually easier to place above a console due to its smaller height and width.

Above a chest of drawers

Wide furniture requires alignment of axes. The frame can be narrower than the dresser if the difference is noticeable and symmetrical. RM-056 often turns out to be too tall or wide, whereas RM-047 is easier to fit into a vertical block.

Between sconces

Lighting fixtures should not overlap the carving and reflect in the mirror with inconvenient glare. First, mark the outer contour, then the centers of the sconces. With existing wiring, the available width may immediately exclude RM-056.

Opposite the window

A large mirror adds light but can create direct glare. Check the reflection at different times of day. An openwork light RM-056 better supports airiness, a dark one creates a contrasting silhouette.

RM-056 for full-length mirror

The external height of 1873 mm makes the RM-056 the first candidate when a buyer needs a large vertical mirror. But functionality is determined not only by the frame height. You need to know the internal field, install the product at the correct mark, and leave space for safe mounting.

Hallway and dressing room

A person should step back a sufficient distance. In a narrow hallway, a large mirror can be useful, but a frame width of 1273 mm often does not fit into the wall space. In a dressing room, a free wall and calm facades create a more suitable backdrop.

Hall and stair landing

Here, the RM-056 reveals itself as an architectural object. It is visible from a distance and helps to assemble a large empty wall. Before ordering, check the railings, staircase turn, and lifting route.

Beauty salon and showroom

A large mirror is both functional and decorative. The enamel color is linked to the brand palette, furniture, and lighting. Before the series, one sample is installed or an accurate visualization of the scale is made.

Hotel lobby

The openwork frame can become an accent between doorways or opposite the waiting area. The mounting is calculated considering public use and the impossibility of accidental displacement.

Large bedroom

The RM-056 requires a calm wall. There should be no dense set of paintings, complex headboard, or active wardrobe nearby. If the interior is already saturated, the RM-047 may be more precise.

RM-047 above the console and dresser

The size 1500 × 883 mm allows the mirror to be paired with furniture without turning it into a nearly floor-standing object. The frame remains large and requires marking, but the vertical composition is easier to assemble.

Над узкой консолью

If the furniture is noticeably narrower than 883 mm, the frame may look heavier than the base. Create a general layout. Sometimes the console should be wider than the frame, sometimes a slight overhang is acceptable, but the proportion should look intentional.

Above a wide dresser

RM-047 can occupy the central part of the wall, leaving free margins. The oak tint supports the wooden tabletop and facades, while the beech under enamel supports painted furniture.

In a study

The frame can tie together a console, a library, and a wooden door. Oak suits natural finishes, and the classic carving supports paneled furniture. The pine geometric RM-056 may be too independent in such a composition.

In the dining room

A mirror above a sideboard increases light and supports symmetry. It is necessary to check the reflection of the dining area and light fixtures. RM-047 is easier to place between sconces and coordinate with furniture.

In the bedroom

The frame is placed above a dresser or on a separate wall. The decor should not conflict with the headboard. Light enamel makes the classic carving softer, while tinted oak adds a pronounced natural accent.

Hallway: RM-056 or RM-047

The hallway requires both a functional mirror and free passage. Here, the choice is often determined not by style, but by the width of the wall section, the depth of the room, and the position of the entrance door.

Spacious foyer

RM-056 is more suitable: the large openwork silhouette is visible immediately upon entry. It can be painted in the color of the wall panel or, conversely, highlighted with a contrasting enamel.

Standard hallway

RM-047 often turns out to be more practical. The width of 883 mm leaves room for the architraves and the cabinet. It can hang above a console or separately.

Narrow hallway

Both models need to be checked for lateral overhang and viewing distance. A large frame may physically fit but appear too close. In that case, you should open Catalog of wooden frames and choose a more compact model.

Pine, beech, or oak: the material changes not only the color

The choice of wood species is related to the finish and how the frame should be perceived next to the furniture. RM-056 made of pine is designed for a large painted form. RM-047 made of beech or oak allows you to choose between a covering enamel and a finish with visible wood grain.

Pine RM-056 for enamel

Finger-jointed solid wood without knots helps create a smooth base for color. The buyer chooses RM-056 not to showcase the pine grain, but for the openwork geometry and scale. White, cream, graphite, or other enamel emphasizes the outer contour and the repetition of the ornament.

Beech RM-047 for enamel

Beech is suitable for a classic carved form that needs to be combined with a painted console, dresser, door, or wall panel. It is chosen when the size of RM-047 fits better and the natural texture is not the main priority.

RM-047 oak for tinting

An interior needs an oak version where the frame should look exactly like wood. Tinting preserves the pores and pattern, linking the frame with furniture and baseboards. On the carving, the color is visually uneven: recesses appear darker, protrusions lighter.

Why pine should not be passed off as oak

Even an exact shade imitation does not create an oak structure. If the buyer values visible pores and a natural match with oak furniture, it is better to choose RM-047 made of oak. RM-056 unfolds in a different logic — through enamel, openwork, and a large silhouette.

Why oak is not always needed under dense enamel

Opaque finish hides the main visual advantage of oak. If a painted RM-047 is needed, beech usually fits the task more accurately. An exception is possible for structural or restoration requirements, but it cannot be assigned without a project.

Same color on different wood species

Even under enamel, the base affects preparation. Pine and beech require a coordinated primer system. One color code does not cancel a test coat and gloss check on the relief.

White, colored, or dark frame

White RM-056

Light enamel visually lightens a large area and emphasizes the openwork edge with shadow. On a white wall, the frame becomes calmer; on a colored wall, it stands out more. It is important to check the shade of white: a cold frame next to a warm wall may look accidental.

Colored RM-056

Large format allows using the frame as an independent color accent. In a showroom, salon, or hall, the shade can complement furniture, textiles, or the brand palette. First, a full-size visualization is made because a small swatch does not show how the color will work on an area of 1873 × 1273 mm.

Black RM-056

Dark openwork creates a graphic silhouette. On a light wall, it is especially active and requires a calm environment. In a small room, a black frame may seem heavier than the same size in light enamel.

White or colored RM-047

A beech frame under enamel is suitable for a bedroom, dining room, and hallway. Classic carving can be noticeable but does not have to become the main object. The color can be conveniently matched to furniture facades.

Tinted oak RM-047

The natural shade makes the frame part of a wooden ensemble. It works well next to a chest of drawers, door, and panels. The tone does not have to match exactly in every detail, but the color temperature and gloss level should be coordinated.

Openwork geometric or classic carved ornament

The choice of pattern influences the style more than the rectangular shape. RM-056 builds a contour through large repeating openings and geometry. RM-047 is perceived as a traditional carved frame, which is easier to associate with classic furniture.

Modern Classic

Both models can work in this direction. RM-056 under a solid enamel looks more graphic and architectural. RM-047 with moderate coloring or oak tinting supports the more traditional part of the interior.

Classic Interior

RM-047 is usually easier to match with paneled doors, a chest of drawers, a console, and carved decor. RM-056 suits a formal space, but its geometric openwork must correspond to the rest of the architecture.

Eclecticism

A large colored RM-056 can become a deliberate contrast on a calm wall. RM-047 blends more easily with antique and modern furniture thanks to natural oak. In both cases, one main accent is needed, not several competing carved objects.

Minimalist wall

An openwork RM-056 can replace a set of decor and keep the wall visually cohesive. But minimalism does not mean automatic compatibility: a large pattern can be too active. RM-047 will be calmer in area, but classic carving also requires checking.

General principles help clarify the material how to choose the frame width.

How to evaluate the wall and mounting

A large wooden frame together with the mirror panel forms a heavy and fragile structure. The exact weight of RM-056 and RM-047 is not indicated in the diagram. Therefore, the mounting cannot be chosen based on external size, wood type, or a common household hook.

Wall material

Concrete, solid brick, hollow block, drywall, wood panel, and multilayer cladding require different solutions. You need to know where the load-bearing base is, not just the decorative surface.

Drywall

For a large frame, embedded parts or attachment to the load-bearing structure are provided in advance based on calculations. A single sheet should not be considered a universal base. If the wall is already finished, its structure is inspected before

Protection against tipping and shifting

The wall-mounted frame must remain stable during cleaning and accidental contact. This is especially important in the hallway, salon, and hotel. The solution is determined by a specialist who sees the wall, frame, and mirror panel.

Installation before furniture arrangement

For RM-056, a free zone in front of the wall may be required. A console, bed, or stand is more convenient to install after the frame, if the project and room conditions allow. The route and order of work are agreed upon in advance.

Drilling after finishing

Fastening points must be confirmed before painting the wall and frame. An error on a finished surface is difficult to repair. First, marking is done and the structure is checked, then proceed to final installation.

Surface preparation and finishing

RM-056 "Prestige"

Confirmed grinding does not cancel incoming inspection. Before enameling, check the openwork edges, recesses, and future attachment points. Thin ornament cannot be aggressively re-sanded to avoid changing the silhouette.

RM-047 "Standard"

This option can be considered for a workshop that performs its own finishing. The scope of work and exact requirements must be agreed upon according to the current STAVROS rules. Areas that will remain visible under the tint are checked especially carefully.

RM-047 "Prestige"

Suitable for close-up viewing and complex finishing, where the quality of the relief is noticeable. For oak under tint, manual preparation is especially important because the transparent finish does not hide the surface.

Test paintout

It is done on the same wood species and similar relief. The color on a flat sample does not show the depth of shadow. For RM-056, it is also useful to evaluate the color swatch on a large fragment because the scale changes perception.

Finishing before mirror installation

It is often safer to protect the wooden frame before contact with glass, but the exact order depends on the design. The mirror and back elements should not be damaged by primer, paint, or solvents. The assembly sequence is confirmed in advance.

Care for a large wooden frame

Openwork edge RM-056

Dust accumulates in gaps and on inner edges. It is removed with a soft brush or a gentle attachment without pressure. Thin elements are protected from impacts and rough fabric.

Thread RM-047

Recesses are cleaned carefully, considering the finish. Tinted oak and enamel may require different products. Harsh household chemicals are not used without testing.

Mirror surface

The product should not drip onto the wood or accumulate in the joint. It is better to apply it to a cloth rather than spray it over the entire structure. Exact recommendations depend on the frame coating and mirror type.

Checking the fastening

After installation, the structure is inspected periodically. Looseness, changes in position, and wall damage require professional inspection, not additional random tightening.

How to coordinate the frame width with the console, dresser, and wall

The width of the furniture and frame does not have to match, but the ratio should look intentional. The most controversial option is almost identical width with a slight random difference: the viewer perceives it as a measurement error. Therefore, the outer contour of RM-056 or RM-047 should be compared not only with the wall but also with the furniture under the mirror.

Frame narrower than furniture

This option usually looks stable. The dresser or console forms a base, and the mirror occupies the central part. RM-047 with a width of 883 mm is convenient to use above wider furniture if the side fields are symmetrical and not occupied by tall decor.

Frame equals furniture in width

Exact alignment creates a strict vertical composition but requires precise marking. It is necessary to consider not only the body but also the protruding tabletop. If the frame aligns with the body and the tabletop is wider, the result is perceived differently.

The frame is wider than the furniture

This technique is possible when the mirror becomes the main object. RM-056 is often wider than the console, so the wall must remain free, and the furniture visually stable enough. On a narrow cabinet, a large openwork frame looks heavy.

Side items on the tabletop

Tall lamps, vases, and decor can overlap the lower edge of the frame or reflect in the mirror. They are added to the layout before height approval. Sometimes a more compact RM-047 leaves room for paired lamps, while RM-056 requires an almost empty tabletop.

Wall axis and furniture axis

The frame can be centered on the wall section or on the furniture. If these axes do not align, one main logic must be chosen. An accidental intermediate position is especially noticeable with the large RM-056. Full-size marking helps make a decision before mounting.

What to buy together with RM-056 and RM-047

A large wooden frame is only one part of a finished mirror assembly. The buyer needs to decide in advance on the mirror panel, back protection, mounting, finishing, and installation. Since there are no confirmed cards for these components in the SEO scheme, the links in the table lead only to actual frame pages and STAVROS expert materials.

How not to confuse the frame with similar solutions

Frame and finished mirror

The frame card should not automatically be perceived as a full mirror card. The completeness of the glass, backing, and mounting must be confirmed. A buyer ordering only the wooden frame must separately agree on the mirror sheet and assembly.

External dimension and reflective part dimension

1873 × 1273 mm and 1500 × 883 mm are external dimensions. The visible mirror will be smaller. You cannot plan functionality based on external height without knowing the light opening.

Finished frame and baguette by the meter

RM-056 and RM-047 have a finished external contour and a fixed size. The linear molding allows assembling a custom rectangle but requires corner joints, calculations, and production. The material reveals more differences how a finished frame differs from a baguette.

Pine for enamel and oak for tinting

Painted pine is not an oak frame just because the enamel or decorative coating is similar in shade. If wood texture is important, choose RM-047 made of oak.

"Standard" and "Prestige"

Only "Prestige" is confirmed for RM-056. Two options are available for RM-047. You cannot order RM-056 in "Standard" just by analogy with another model.

Openwork and carved edge

RM-056 has a geometric openwork and a wide decorative band. RM-047 has a classic carved character. They differ not only in scale, so a reduced photo does not convey the real difference.

Practical choice for specific situations

Need a full-length mirror in a spacious dressing room

First, check RM-056. Mark the outer contour, get the exact light size, and make sure the mirror shows the full figure. If the width of 1273 mm interferes with cabinets or passage, RM-047 may be more convenient, but its inner field also needs to be checked.

Need a mirror above the dresser in the bedroom

RM-047 is usually a better fit. Compare the width of 883 mm with the furniture and leave a gap above the countertop. Birch is chosen for enamel matching the facade color, oak for tinting next to natural furniture.

Need a main accent in the hallway

RM-056 can occupy the central wall and replace additional decor. The openwork edge must remain exposed. Check the viewing distance and the delivery route through the entrance area.

Need a mirror between two sconces

RM-047 fits more easily into a limited width. The centers of the lights are calculated after marking the outer contour. If the wiring is already done, measure the clear distance between the fixtures and their shades.

Need a frame in the color of painted doors

You can consider RM-056 made of pine or RM-047 made of birch. The scale decides: almost full-length openwork or a more compact classic carving. One enamel code is tested on two wood types with separate swatches.

Visible oak texture is needed

The choice shifts towards RM-047. The oak is tinted according to the sample and compared with the furniture. RM-056 should not be purchased with the expectation of getting the same material character.

Need a mirror for a beauty salon

RM-056 suits a prominent client area and can be painted in the corporate color. RM-047 is appropriate for individual workstations or a more intimate interior. For public use, mounting, stability, and ease of cleaning are especially important.

Need a mirror for a stair landing

RM-056 reveals itself in scale, but the delivery route may become the main limitation. Check turns, railings, and ceiling height. RM-047 is easier to bring in and install.

Need to keep the wall calm

RM-047 takes up less space and usually blends more easily with furniture. Light enamel additionally softens the carving. RM-056, even in white, remains a large, openwork object.

Mistakes when purchasing RM-056

Not marking the outer contour

The frame looks smaller in the photo. On the wall, 1873 × 1273 mm can cover almost the entire partition. Full-size marking is mandatory.

Place the openwork close to the furniture

A cabinet, curtain, or tall chest of drawers covers the edge and deprives RM-056 of its main effect. A free background is needed around it.

Expect an oak texture

The model is made of pine and is intended for enamel. For a visible texture, it is better to choose the oak RM-047.

Do not check the clearance

A large frame may not fit through a turn, elevator, or staircase. The route is measured together with the packaging.

Order a mirror by external dimensions

The glass must match the internal fit. Use a drawing or template.

Choose fasteners without the weight of the finished structure

The frame and mirror panel form a single unit. The type of wall and fasteners are determined after calculation, not by the size of one wooden part.

Mistakes when buying RM-047

Considering the size 1500 × 883 mm small

RM-047 is more compact than RM-056, but remains a large frame. It may not fit over a narrow cabinet or between closely spaced sconces.

Choosing oak for dense enamel without reason

A covering color will hide the texture. For enamel, it is more logical to check beech if the project does not require oak for other reasons.

Choosing beech for transparent tinting

Beech preparation is stated for enamel. To preserve the natural grain, it is better to consider oak and confirm the finish.

Not choosing sanding in advance

"Standard" and "Prestige" affect preparation and subsequent work. The decision is made before ordering, not after delivery.

Placing the frame almost the width of the dresser

A minor random mismatch looks like an error. Either a clear equality in the design or a noticeable and symmetrical difference is needed.

Who RM-056 is suitable for

• a spacious hall, dressing room, or formal living room;
• a wall where the mirror should become the main decorative object;
• a project with an almost full-length external format;
• an interior that needs an openwork geometric silhouette;
• white, cream, graphite, or colored enamel;
• a salon, showroom, restaurant, and hotel lobby;
• a wall section wider than 1273 mm with sufficient free space;
• a buyer who is ready to check delivery and installation in advance;
• a project where natural oak texture is not the main goal.

When it's better not to choose RM-056

• the frame should hang above a compact console or a small chest of drawers;
• the wall space is limited by doors, a wardrobe, curtains, or sconces;
• the height of 1873 mm brings the frame close to the ceiling;
• the delivery route does not allow the packaged dimensions to pass through;
• the interior is already saturated with active carving and ornamentation;
• the buyer needs visible oak texture;
• there is no confirmed base for safe mounting.

Who RM-047 is suitable for

• to the mirror above the console, chest of drawers, or sideboard;
• to the bedroom, study, dining room, and spacious hallway;
• to the wall space where the width of RM-056 is excessive;
• to a classic furniture ensemble;
• to a beech frame with opaque enamel;
• to an oak frame with tinting while preserving the texture;
• to the customer who needs the "Standard" or "Prestige" option;
• to the composition between wall sconces;
• to an interior where the frame should complement the furniture, not occupy the entire wall.

When it's better not to choose RM-047

• need a maximally large openwork accent almost 1.9 m high;
• the geometric silhouette RM-056 fits the interior better;
• the external size 1500 × 883 mm still does not fit;
• the buyer expects a finished mirror without checking the completeness;
• the mirror panel size and mounting diagram are not confirmed;
• classic carving conflicts with minimalist furniture.

What to Check Before Ordering

• article RM-056 or RM-047;
• external frame size;
• full-size outline on the wall;
• distance to floor, ceiling, furniture, and doors;
• position of switches, sockets, and sconces;
• reflection of window, passage, and furniture;
• precise inner mounting contour;
• light size of the mirror;
• full size and thickness of the mirror panel;
• whether the mirror is included in the set;
• whether the back panel and mounting are included;
• weight of the finished structure;
• wall material;
• presence of embedded parts;
• suspension system and number of points;
• delivery route with packaging;
• pine, beech or oak;
• enamel or tinting;
• 'Standard' or 'Prestige' sanding;
• test paint sample;
• finishing order, glass installation and mounting;
• current price, delivery time, availability and terms of receipt.

How to buy RM-056 or RM-047 at STAVROS

First, draw two outer contours on the wall. Compare 1873 × 1273 mm and 1500 × 883 mm together with furniture, doors and sconces. After selecting the scale, check the delivery route and get an accurate drawing of the internal fit for the mirror.

For an almost full-length openwork accent, open the card and order RM-056 in an individual color. For placement above furniture or finishing with natural texture, open the card and buy an oak frame for the mirror or choose beech under enamel.

When both models do not fit in size or pattern, it is worth choose a frame for the mirror in the general category. Before making a final decision, it is useful to read how to choose a frame for a mirror, and compare separately shapes of wooden frames.

FAQ: questions about RM-056 and RM-047

How is RM-056 different from RM-047?

RM-056 is larger, made of pine, has an openwork geometric pattern and a "Prestige" finish. RM-047 is more compact, available in beech or oak, and comes in "Standard" or "Prestige" finish.

What size does RM-056 have?

The confirmed external size is 1873 × 1273 × 44 mm, the decorative band is 240 mm.

What size does RM-047 have?

Confirmed external dimensions — 1500 × 883 × 44 mm.

How much bigger is RM-056?

It is 373 mm taller, 390 mm wider, and the external rectangle area is approximately 1.8 times larger.

Which frame is better for a full-length mirror?

In terms of external scale, RM-056 is a better fit, but the internal light size and installation height need to be confirmed.

Which frame fits above a dresser?

More often RM-047, because it is more compact. Width and height are still compared with specific furniture.

What to choose above a console?

RM-047 is easier to fit into a vertical composition. RM-056 is only suitable for a large console and a tall free wall.

What is RM-056 made of?

Made of finger-jointed pine without knots.

What is RM-047 made of?

in beech or oak.

What to choose for enamel?

RM-056 from pine or RM-047 from beech. The final choice is determined by size and ornament.

What to choose for tinting?

Oak RM-047, if you need to preserve the natural wood texture.

Can I order RM-056 with a "Standard" finish?

Only the "Prestige" finish is specified in the confirmed data for it.

What grinding is available for RM-047?

"Standard" or "Prestige". The exact differences are checked before ordering.

Is a mirror included in the set?

The completeness is not confirmed in the provided diagram. It needs to be checked in the product card.

How to calculate the size of the mirror panel?

Use the precise internal mounting contour and drawing. Do not rely solely on external dimensions.

Can I subtract 240 mm from each side of the RM-056?

No. The width of the openwork belt does not guarantee a consistent rectangular opening and does not describe the mounting rebate.

How can I check if the frame will fit on the wall?

Mark the outer contour with painter's tape and add furniture, doors, sconces, baseboards, and crown molding.

How to check the delivery route?

Measure doors, elevator, staircase, hallway turns, and clearance for maneuvering, accounting for packaging.

What fasteners are needed?

It depends on the weight of the finished structure, wall material, suspension system, and number of points. Universal fasteners are not assigned.

Can a large frame be mounted on drywall?

Only according to a calculated scheme with embedded elements, a load-bearing frame, or another verified foundation.

Which model is suitable for a salon or showroom?

RM-056 creates a more noticeable accent, RM-047 suits chamber spaces and individual work areas.

Where to buy RM-056?

In the card, you can Buy large openwork frame RM-056.

Where to buy RM-047?

In the card, you can Buy carved frame RM-047 made of beech or oak.

Where to see other wooden frames?

You can choose a carved mirror frame in the general category.

Result: maximum openwork scale or a more versatile carved frame

RM-056 and RM-047 address different tasks. RM-056, 1873 mm high and 1273 mm wide, needs a large free wall, a full-length scenario, and an interior where the openwork enamel frame becomes the main object. RM-047, sized 1500 × 883 mm, is easier to place above furniture, in the bedroom, study, and hallway.

The material enhances the difference. RM-056's pine suits white, colored, or dark enamel. RM-047's beech is also chosen for opaque colors, while oak allows preserving the natural texture and matching the frame with furniture. Therefore, the buyer decides three questions simultaneously: how much wall the frame should occupy, what ornament is needed, and whether the wood should remain visible.

Before ordering, mark the wall, get the exact inner contour, check the mirror panel, delivery, wall, and mounting. After that, STAVROS cards become a point of informed purchase, not an attempt to choose a large frame from a photo without understanding its real scale.