A pine backing board of 390 ₽ appeared in the invoice for 6 slats: is it worth ordering a seventh wooden molding MLD-016 22×22 mm for the sake of packaging

The project has already been calculated: six MLD-016 strips are needed. After placing the order, an additional line appears in the invoice — "pine backing 390 ₽". The product card states that when ordering up to 6 pieces, this backing is added to create a rigid frame for transportation. A quite logical thought arises: if you take not six, but seven strips, wouldn't the total order turn out to be more advantageous?

If the seventh strip is not needed for the project, buying it just to try to remove the 390 ₽ line makes no economic sense. One beech MLD-016 costs 1,430 ₽, oak — 2,030 ₽. Even in the most favorable hypothetical scenario where, with seven strips, the separate 390 ₽ disappears entirely, seven beech strips cost 1,040 ₽ more than six with the backing, and seven oak strips cost 1,640 ₽ more.

But there is an even more important point: the wording "when ordering up to 6 pcs., a pine backing is added" does not automatically mean "with 7 pcs., there is no packaging." For a larger batch, a different transport protection scheme may apply. It needs to be seen in the recalculated invoice, not guessed.

Therefore, the quantity of MLD-016 is determined by the cutting map and a reasonable reserve. The packaging line is checked separately. If the project truly requires a seventh strip, it is ordered. If not, an expensive full-size molding is not turned into a way to "save" 390 ₽.

The specific item can be opened as Wooden Moulding MLD-016.

Go to Catalog

Wooden molding MLD-016 22×22×2400 mm: what exactly is in the cart

In the current product table for MLD-016, there are now two items:

Material	Size	Sanding	Price
Beech	22×22×2400 mm	Prestige	1 430 ₽
Oak	22×22×2400 mm	Prestige	2 030 ₽

For the selected beech item, the finish "Under enamel" is specified. There is no MDF in the current product table for MLD-016.

This is important because many neighboring molding products have a scheme like "MDF 2600 mm / solid wood 2400 mm". For MLD-016, it cannot be applied out of habit: the current card shows exactly beech and oak with a length of 2400 mm.

If the product is out of stock, the card indicates an average production time of 5–10 days. Delivery is available across Russia.

That is, before calculating the packaging, you first need to fix the product itself:

MLD-016 / beech or oak / 22×22×2400 mm / Prestige / quantity ___ pcs.

And already to this line, the seller adds the actual packaging scheme.

Buying 6 wooden moldings: why another line item appeared in the invoice

The MLD-016 card directly explains the condition: when ordering up to 6 pieces, a pine backing worth 390 ₽ is added to the invoice, which creates a rigid frame for safe transportation.

This is not the cost of a seventh item and not a change in the price of MLD-016.

It is useful to distinguish between two things:

the product — a wooden profile 2400 mm long;

transport preparation — an additional rigid base for a small batch of long-length goods.

For a long plank of 2400 mm, packaging is not a minor formality. The product must survive warehouse handling, loading, transportation, and delivery.

Therefore, the question "why pay 390 ₽?" is better replaced with a more precise one:

How will my specific order of six MLD-016 units be packaged, and what will change in the invoice for a different quantity?

If you still need to choose a profile, you can Buy wooden molding go through the general section for linear products. But if MLD-016 is already approved, changing the quantity just because of packaging is not worth it.

Our factory also produces:

View Full Product Catalog

Six beech MLD-016 or seven: calculating the attempt to "save" 390 ₽

The current price of beech MLD-016 is 1,430 ₽.

Six planks:

6 × 1 430 = 8 580 ₽.

Adding the backing declared for a small batch:

8 580 + 390 = 8 970 ₽.

Seven planks without considering any packaging:

7 × 1 430 = 10 010 ₽.

The difference:

10 010 − 8 970 = 1 040 ₽.

This calculation favors the most optimistic hypothesis for seven pieces: we don't add any packaging cost to them at all.

Even then, seven planks are more expensive.

That is, if the seventh MLD-016 is not needed for the project, the buyer pays at least 1,040 ₽ more compared to six planks and the 390 ₽ line.

But a real invoice for seven items may include a different packaging scheme. It needs to be confirmed separately.

Oak MLD-016: an extra plank for packaging costs even more

For oak, the logic is the same, but the price is higher.

One plank:

2 030 ₽.

Six:

6 × 2 030 = 12 180 ₽.

With backing:

12 180 + 390 = 12 570 ₽.

Seven slats without any additional packaging:

7 × 2 030 = 14 210 ₽.

The difference:

14 210 − 12 570 = 1 640 ₽.

And here, buying a seventh plank just to try to remove 390 ₽ does not work as savings.

But this doesn't mean that the seventh oak MLD-016 should "never be taken." If it's actually needed for cutting, as a spare part, or as a reserve for future replacement, its cost is evaluated by a different logic.

How much the backing actually adds to the price of one of the six planks

For the current order of six pieces, you can mentally distribute 390 ₽ across the entire set.

390 / 6 = 65 ₽.

That is, if the invoice has one backing of 390 ₽ for six planks, its conditional share is 65 ₽ per plank.

For the beech MLD-016, the item price of one plank is 1,430 ₽. With the conditional backing share:

1 430 + 65 = 1 495 ₽.

For oak:

2 030 + 65 = 2 095 ₽.

This is not a new official product price, but only a way to understand the scale of an additional logistics line within a specific invoice.

Such a recalculation helps to see: buying a seventh full-size plank to eliminate the conditional 65 ₽ packaging share on each of the six looks even less rational.

Why the 390 ₽ line psychologically seems more expensive than it is

An additional line in the invoice is always more noticeable than the same amount dissolved in the product price.

The buyer already sees:

MLD-016 — 6 pcs.

and perceives the calculation as complete.

The appearance of a separate line:

pine substrate — 390 ₽

looks like an unexpected price increase.

But for the beech batch, the cost of the products themselves is 8,580 ₽. 390 ₽ is approximately 4.5% of that amount.

For the oak batch, the cost of the products is 12,180 ₽. 390 ₽ is about 3.2%.

This does not mean that the packaging cost should not be checked. It should be checked. But economically, it should be compared with the price of a real alternative action — for example, with the purchase of an additional plank for 1,430 or 2,030 ₽.

When it really makes sense to order the seventh wooden molding

The seventh MLD-016 can be an absolutely rational purchase. The reason just needs to be design-related, not packaging-related.

It is needed according to the cutting layout

If the finished parts physically do not fit into six original planks of 2400 mm each, the seventh is needed regardless of the backing.

A justified reserve is needed

If the site is far away, reordering is difficult, and damage to one part will halt installation, having a spare may be reasonable.

Wood selection is needed

For open finishing, visual selection of solid wood by tone and grain is sometimes important. Additional material can provide sorting freedom.

There is a risk of reworking one element

A complex joint, corner cut, or part that is difficult to replace after work is completed may justify a reserve.

Future renovation is planned

If you want to keep the profile for possible replacement in a few years, a spare piece may be part of the project.

In all these cases, the customer orders a seventh plank because it is needed, not because they saw 390 ₽ in the invoice.

If the sixth plank is already a reserve, adding a seventh is especially pointless

Suppose the final cut requires five MLD-016, and a sixth has already been added as a spare.

Then the current order is:

5 working + 1 spare = 6 planks.

In this case, the seventh becomes already a second reserve.

Buying a second spare whip just to try to change the packaging condition is even less logical.

First, you need to ask:

Why would the project need two spare planks?

If there is no answer, the quantity should not be increased.

Packaging should not turn one calculated reserve into two.

First the cutting map, then the quantity in the cart

For MLD-016, the length of one source plank is 2400 mm.

The quantity should appear after laying out the finished parts.

For example:

A1 — 1120 mm
A2 — 1120 mm
B1 — 760 mm
B2 — 760 mm
C1 — 530 mm
C2 — 530 mm

After that, the parts are distributed across 2400-mm planks, taking into account the actual cutting layout.

And only then do we get:

need 4 / 5 / 6 / 7 source MLD-016.

Incorrect order:

“Let’s take six, because up to six there is a specific package.”

The packaging threshold is not a design standard.

The total footage may show 5 planks, but the actual cutting will require 6.

Let’s imagine the project needs 11 meters of finished profile.

simple arithmetic:

11 / 2,4 = 4,58.

Rounding up gives:

5 planks.

Gross length of five:

5 × 2.4 = 12 m.

By total meters, everything looks sufficient.

But if the project consists of individual long pieces that cannot be joined at arbitrary points, five source planks may not provide the needed layout.

For example, five parts of 2100 mm already require five separate strips, and any sixth long element automatically creates a need for a sixth original MLD-016, even if the total remainder on the previous rods is large.

Therefore, the total length is a control. The quantity of goods is determined by the parts map.

If needed buy wooden molding for furniture, it is especially important to count finished furniture elements, not just the sum of meters.

How to compare two quotes: 6 strips and 7 strips

If doubt remains, the best commercial way is not to argue theoretically, but to ask the manager to generate two calculations.

Invoice A

MLD-016 — 6 pcs.
pine substrate — 390 ₽
Delivery — ___

Invoice B

MLD-016 — 7 pcs.
Packaging — according to the seller's actual scheme
Delivery — ___

You need to compare the final amounts, not just the presence of the 390 ₽ line.

Because seven slats can:

• have a different packaging position;
• change the weight and volume of the shipment;
• change the delivery cost;
• require a different frame;
• increase the logistics cost in a specific shipment.

This is how the issue is resolved with numbers in a real commercial offer.

What to clarify with the STAVROS manager before paying the invoice with the backing

The best way to check the packaging line is not to argue with it or change the cart at random, but to request an exact recalculation.

Useful questions:

1. Does the line "pine underlay 390 ₽" specifically refer to the current six MLD-016 units?
2. What is actually included in this packaging item?
3. How will the packaging change if the quantity becomes seven — if the seventh is actually needed per the project?
4. Will there be other packaging costs for batches of more than six pieces?
5. How is a mixed order packaged if it contains MLD-016 and other trim?
6. Does the packaging scheme change for self-pickup?
7. What is the final delivery cost already including packaging?

This way, the buyer gets a real figure rather than drawing conclusions from a single card condition.

Why the condition “up to 6 pcs.” cannot be read as “from 7 pcs. free”

The phrase describes one specific scenario:

up to 6 pcs. → pine backing 390 ₽.

It does not describe all subsequent scenarios.

It cannot be logically deduced from it:

7 pcs. → packaging 0 ₽.

In a batch of seven or more long-length products, a different rigid frame scheme, different stacking, or different transport preparation may be used.

Therefore, the article cannot promise the absence of packaging costs after the sixth plank.

The only reliable way is to get a new invoice for the actual quantity.

If the project needs fewer than six planks, the rule does not make the order "unprofitable"

The card condition applies to orders up to 6 pieces, so the question may arise when buying one, two, three, or five planks.

There is no need to artificially inflate any small order to six or seven items just to spread 390 ₽ over a larger quantity of goods.

For example, if a project needs two beech MLD-016, the product cost is:

2 × 1 430 = 2 860 ₽.

Adding four unnecessary planks for a "nice" quantity will increase the product part by another:

4 × 1 430 = 5 720 ₽.

This is incomparable with 390 ₽.

The same principle applies to one, three, four, and five items: first, buy as many as the project and reserve require, then accept the packaging scheme of the specific invoice.

Buy wooden molding with delivery: saving carefully on the protection of a long slat

MLD-016 has a length of 2400 mm.

The buyer pays for the backing not as for an interior pine part. Its function is transport protection.

Damage to a long wooden profile can manifest as:

• edge chipping;
• a dent;
• damage to the visible surface;
• deformation;
• damage to the end.

There is no need to claim that without a backing the product will necessarily be damaged. But the point of additional packaging is precisely to reduce the risk during transportation.

If one damaged oak plank costs 2,030 ₽, saving 390 ₽ on transport protection already looks different.

Beech or oak: the packaging rule should not influence the choice of material

Both versions of MLD-016 have the same size:

22×22×2400 mm.

But the price is different.

Beech — 1,430 ₽.

Oak — 2,030 ₽.

The material is chosen according to the project: future finishing, combination with furniture or interior, requirements for visible texture.

You shouldn't choose beech over oak just because an extra beech plank is cheaper and "more convenient to jump over the threshold of six pieces."

This is substituting logic.

First, the material.

Then cutting.

Then the quantity.

Then, the packaging.

Mixed order of beech and oak: the number of planks still doesn't indicate how they will be packaged

Suppose, in one invoice:

• 3 beech MLD-016;
• 3 oak MLD-016.

Total — the same 6 slats.

You cannot assume on your own that they necessarily form one packaging group just because the profile and length are the same.

The seller may take into account material, marking, packing method, or other logistical requirements.

Therefore, for a mixed order, the question should be asked directly:

Will six MLD-016 from two wood species be packed as one batch, and how will the backing be calculated?

Such wording is better than any guesses.

Mixed basket: you cannot combine all long profiles and cancel the backing on your own

Let's imagine an order:

• 4 MLD-016;
• 3 of another molding;
• 2 baseboards;
• 2 cornices.

Total — 11 long-length products.

You cannot conclude:

"Since there are only 11, the condition of up to 6 definitely does not apply."

Different products may have:

• different cross-sections;
• different lengths;
• different packaging standards;
• different stacking methods;
• separate restrictions on combined transportation.

The mixed order scheme is determined by the seller.

Therefore, if you want Buy wooden moldings together with other trim, request the final packaging of the entire cart, rather than calculating it by the total number of slats.

When you shouldn't buy a full-size MLD-016 just "to take a look"

There is another scenario: the project is not yet approved, but the client wants to see a real profile.

Buying an extra strip 2400 mm long just for visual evaluation is not always rational.

STAVROS has a separate Molding samples set OMLD-005, intended for physical comparison of profiles and materials.

This is especially useful for a designer, furniture workshop, or specifier who regularly selects trim.

At the same time, one cannot automatically promise that a specific MLD-016 is necessarily included in the current set composition if the composition is not confirmed by the article number. The set here is needed as a separate tool for comparing profiles, not as a guaranteed "MLD-016 sample in the case."

Six MLD-016: what a normal request should look like

For beech:

MLD-016 / beech / 22×22×2400 mm / Prestige / 6 pcs. / finish ___ / finished parts per cutting map ___ / reserve calculated ___ / delivery ___ / please confirm pine backing 390 ₽ and final packaging.

For oak:

MLD-016 / oak / 22×22×2400 mm / Prestige / 6 pcs. / confirm packaging and delivery.

This way, the manager sees that the quantity of six came from the project.

And the buyer gets the ability to compare the invoice with the original list.

If a seventh is needed as a reserve: how to make a decision without false economy

The reserve does not have to be free or "cover the packaging costs."

For beech, an additional plank costs 1,430 ₽.

For oak — 2,030 ₽.

The question should be posed as follows:

How likely is it that re-purchasing one plank later will cost more in time, delivery, and downtime?

If the object is nearby and the additional order is simple, a spare may not be needed.

If installation takes place in another city, the deadline is limited, and the profile will have to be ordered separately later, the seventh plank can be a rational safety stock.

But this is a separate decision.

The 390 ₽ for packaging is not the main argument here.

Order acceptance: the packaging tray also needs to be checked

When receiving a batch, it is useful to verify:

• MLD-016;
• the material;
• size 22×22×2400 mm;
• quantity;
• condition of long planks;
• declared packaging;
• absence of visible transport damage.

If the invoice included a separate backing, it makes sense to check that the actual packaging matches the agreed scheme.

The pine backing itself should not be perceived as part of the interior set. It is a transport item.

Errors when ordering MLD-016

Mistake: buying a seventh plank just for 390 RUB. At the current product price, such "savings" increases the order cost.

Mistake: assuming that after six, packaging is automatically free. The product card does not promise this.

Error: determining the quantity by the packaging threshold. The quantity is determined by the cutting layout.

Error: counting only the total length. Individual finished parts may require more source planks.

Error: choosing the material for the cost of an extra plank. Beech or oak are chosen according to the project.

Error: adding different profiles in one cart and calculating the total packaging norm yourself. A mixed scheme must be confirmed by the seller.

Should I order the seventh MLD-016: final decision

Is the seventh needed according to the cutting layout?

→ Order.

Is the seventh needed as a deliberate reserve?

→ Compare the cost of stock with the risk of reordering.

Is the seventh one not needed and only appears to try to remove 390 ₽?

→ At the current price, this is not profitable.

Want to understand how the packaging changes after six items?

→ Ask to recalculate the invoice for the actual quantity.

In the invoice, there are six slats + 390 ₽ and all parameters are correct?

→ This is a normal product-logistics scheme that can be evaluated as a single order.

If MLD-016 is already selected, proceed to the card of the wooden molding MLD-016. If the profile is still being selected, it is more convenient to first look Wooden moldings and baseboards.

Questions before purchasing MLD-016

What is the size of MLD-016?

22×22×2400 mm.

What materials are currently in the product table?

Beech and oak.

Is there an MLD-016 made of MDF?

MDF is not shown in the current product table.

How much does the beech MLD-016 cost?

1,430 ₽ at the time of checking.

How much does the oak MLD-016 cost?

2 030 ₽.

Why does a backing appear when ordering six slats?

The card indicates that when ordering up to 6 pieces, a pine backing is added for 390 ₽ for rigidity during transport.

Is it worth buying a seventh just for the packaging?

No, if the project doesn't need it. At current prices, the additional item costs much more than 390 ₽.

Does any packaging cost disappear with seven slats?

The card does not guarantee this. You need to request a recalculation of the invoice.

How much do 6 beech MLD-016 cost together with the 390 ₽ backing?

8,970 ₽ before other expenses.

How much do 6 oak ones cost together with the backing?

12 570 ₽.

When is it still reasonable to buy the seventh slat?

When it's needed for the cutting layout or as a justified project reserve.

Can the quantity be calculated only by total length?

No. You need a map of finished parts and cutting layout for 2400 mm rods.

Where to buy MLD-016?

In the card of the wooden molding MLD-016 STAVROS.

Where to see other wooden moldings?

In the general section of STAVROS linear products.