Buy a tabletop: square ST-026-1 800 × 800 mm or rectangular ST-026-2 1200 × 800 mm — which to choose

Tabletop ST-026-2

from 124.43 $

Top ST-026-1

from 96.37 $

Go to Catalog

Why the tabletop size should be chosen before the underframe and chairs

ST-026-1 and ST-026-2 belong to the same minimalist series, have the same thickness of 25 mm, and are available in MDF, MDF with beech veneer, and MDF with oak veneer. The main difference is the geometry of the work surface. The square 800 × 800 mm occupies 0.64 m² and is suitable for a compact table for 2–4 people. The rectangle 1200 × 800 mm provides 0.96 m², which is 50% more usable area, and is more convenient for daily family seating, work, and serving.

ST-026-1 — square 800 × 800 mmA rational size for a small kitchen, study, cafe, or a table for two with the possibility of occasionally seating four people.

ST-026-2 — rectangle 1200 × 800 mmMore space for four permanent seats, serving, monitor, laptop, documents, and shared use.

Same width 800 mmBoth models provide the same seating depth opposite each other; the table length and free space on the sides differ.

MDF, beech veneer, or oak veneerThe material is chosen based on the finish: opaque enamel, calm light texture, or a more pronounced oak pattern.

Ready-made frames seriesFor the square model, STL-026-1 is provided, for the rectangular one — STL-026-2. Compatibility and mounting points are checked before finishing.

Short answer: for a small kitchen, compact study, or table for 2–4 people, choose the square ST-026-1 measuring 800 × 800 mm. For daily family seating, a dining table, or a large workspace, the rectangular ST-026-2 measuring 1200 × 800 mm is better: its usable area is 50% larger.

Buy ST-026-1 800 × 800 mm Buy ST-026-2 1200 × 800 mm Choose a table base

Buy a tabletop for the table correctly means deciding in advance how many people will use the table daily, how much space can be allocated for furniture, and what tasks the surface should perform. Square and rectangular tabletops from the same series look similar in photos, but behave differently in a room. ST-026-1 is easier to place in a compact kitchen, push against a wall, or use as a separate workspace. ST-026-2 requires a longer free area, but allows you not to move the laptop before dinner and not crowd dishes in the center.

Both models have a width of 800 mm. This is an important coincidence: the distance between people sitting opposite each other and the depth of the work area remain comparable. The length differs. The additional 400 mm of ST-026-2 provides two convenient side sections and increases the total area from 0.64 to 0.96 m². In practice, the rectangular model is not just "slightly larger" — it gives half the area of the square tabletop on top.

The choice of shape is also related to the traffic route. A square table can be centered in a small room, leaving four equal sides, or pushed with one side against a wall. A rectangular table is more often placed along a long wall, window, or room axis. It is easier to divide into dining and work zones, but harder to turn in a square kitchen where doors, radiators, and passages are located on different sides.

The set is also important. The square ST-026-1 logically pairs with the STL-026-1 frame measuring 800 × 800 × 740 mm. For the rectangular ST-026-2, the STL-026-2 underframe measuring 1200 × 800 × 740 mm is provided. Both frames are made of beech or oak, supplied unassembled with a set of fittings, and require coordination of the finish with the tabletop.

Watch video ...

Confirmed specifications for ST-026-1 and ST-026-2

Our factory also produces:

● Universality. The wooden trim K-017 is suitable for any style and room, whether it's a living room, bedroom, office, kitchen, bathroom, or hallway. The wooden trim K-017 can be used for various purposes and tasks, such as framing, cladding, decorating, or zoning. The wooden trim K-017 easily complements other decorative elements, creating a harmonious and cohesive look.

from 19.52 $

Wooden Decor N-032

from 15.86 $

Wooden Molding K-039

from 15.13 $

Decor Set C-054

from 368.78 $

Luxe Mirror in Carved Frame 008-004

from 1,897.43 $

Decor Set C.VRS-058

from 200.67 $

Decor Set C.VRS-064

from 200.31 $

Modern furniture leg MN-243

from 80.51 $

View Full Product Catalog

How ST-026-1 differs from ST-026-2

When to buy a tabletop 800 × 800 mm

For a small kitchen

The square tabletop ST-026-1 takes up less space along the wall and leaves more freedom for opening the refrigerator, lower cabinets, and door. In a small kitchen, an extra 400 mm in length often becomes critical: the chair hits the cabinet, the passage narrows, and the table has to be constantly moved. The 800 × 800 mm size is easier to fit in the center of the room or place against the wall without the feeling that furniture is blocking the space.

With daily seating for two, the square can be turned so that each person sits on an adjacent side or opposite. If guests come occasionally, two additional sides allow for two more chairs. For a permanent family of four, such seating is possible, but the central area for dishes will be limited. In this case, it is important to honestly assess what is more important: free passage or surface space.

For a table for two

For a couple, an 800 × 800 mm tabletop provides equal spaces and doesn't force sitting too far apart. It accommodates two place settings, a teapot, a small dish, and everyday items. The square shape avoids a "head" end and works well in a calm home breakfast area.

If one person temporarily works at the table, the other can use the adjacent side. But a permanent monitor, printer, and stacks of documents quickly occupy the center. Therefore, a square is suitable for a workspace that can be cleared for dinner, not a full home office with a large set of equipment.

For a compact workspace

ST-026-1 is convenient for a laptop, lamp, notebook, and a small monitor. The 800 mm depth allows you to push the screen back and keep space in front of the keyboard. The square tabletop looks neat and can stand in a study, bedroom, or living room as a separate desk without a long office line.

The buyer needs to check the location of outlets and wires in advance. If a system unit, printer, or document storage is planned permanently, 800 mm of length may be insufficient. In that case, a rectangular model is more rational, even if it takes up more room.

For a square room

In a room where walls are close in length, a square table is easier to center. It supports the geometry of the space and leaves more even walkways. A 1200 × 800 mm rectangle can highlight one axis and make free zones on the sides unequal.

This is especially noticeable in a kitchen with doors on two adjacent walls. ST-026-1 allows maintaining a diagonal route through the room. Before ordering, it's useful to outline the 800 × 800 mm contour on the floor with painter's tape and arrange real chairs.

For a cafe, meeting room, or waiting area

The square format suits a small table for two visitors, a short meeting, or displaying samples. Several identical tables can be placed separately or temporarily combined. But joining two tabletops does not replace one long surface: legs and gaps limit seating.

When four seats are needed only sometimes

If on weekdays the table is used by one or two people, and four chairs appear on weekends, ST-026-1 saves space most of the time. Additional chairs can be stored separately. For regular family dinners, an 800 mm square will require more disciplined serving and may become cramped.

For such a scenario, you can buy a square tabletop for a table and choose a frame that does not take up extra knee space.

When to choose a 1200 × 800 mm tabletop

For a daily dining table

ST-026-2 provides four permanent seats on the long sides and leaves the ends for additional chairs. This is more convenient for a family that uses the table daily for breakfast and dinner. The 1200 mm length allows spreading out place settings and leaving shared dishes in the center.

Six seats are possible as a periodic scenario, but much depends on the width of the chairs, the underframe design, and how freely people should sit. Do not promise equal comfort for six wide armchairs and six compact chairs. A mockup with real furniture will give an accurate answer.

For a family of four

Four people sit at a rectangular tabletop, two on each long side. Each person has their own area, while the ends remain free for passage or serving. At a square table, four permanent seats are distributed on all sides, so the chairs take up more of the room's perimeter.

ST-026-2 is especially useful if children do homework at the table, adults work, or items are constantly on the surface. The additional 0.32 m² reduces the need to completely clear the table every time.

For working with a computer and documents

At a length of 1200 mm, the surface can be divided into a main work area and an auxiliary zone. The monitor is placed in the center or to the side, leaving space nearby for a laptop, tablet, documents, and a lamp. A depth of 800 mm is suitable for a screen and keyboard without feeling cramped.

If the table is used by two people simultaneously, the under-table area and legroom must be considered. One rectangle does not guarantee two independent workstations, but it offers more possibilities than a square. Outlets, cable channels, and the position of the light fixture are designed before installation.

For an elongated room

A rectangular tabletop supports the long axis of the room. It is convenient to place it parallel to the kitchen set, window, or wall. In a narrow dining room, a square sometimes leaves too wide empty zones at the ends and insufficient space along the wall, whereas 1200 × 800 mm uses the room more efficiently.

But the long shape requires checking doors and cabinets. A chair pulled out from the long side may block the main passage. The layout must consider not only the table but also the person's position.

For combining eating and working

If a separate desk does not fit, ST-026-2 can combine functions. One end remains a work setup, the other is used for eating. This scenario reduces the amount of furniture but requires protection of the finished surface, careful storage of equipment, and well-planned electricals.

For serving and hosting guests

The extra length is useful for dishes, drinks, and decor. On an 800 × 800 mm square, the center fills up quickly, especially with four place settings. A rectangle allows you to distribute items along the axis without overlapping personal zones.

For a family format, you can buy a rectangular tabletop ST-026-2 and immediately check the compatible underframe STL-026-2.

How much space to leave around the table

The tabletop size is only the first part of the dimension. In the room, chairs, seated people, and traffic routes appear. Therefore, an 800 × 800 or 1200 × 800 mm outline cannot be placed flush between walls and cabinets.

Add the depth of the chair

Place the selected chair at the edge of the layout and pull it out as a real person would sit. The depth of different models varies: a compact wooden chair and a soft armchair take up different amounts of space. Measuring by the catalog number is useful, but trying it in the room is more accurate.

Check the passage behind a seated person

If people walk behind the chair to the kitchen, balcony, or wardrobe, leave space not only for pulling it out but also for movement. Ask one person to sit and another to walk behind them. This test shows whether ST-026-2 fits faster than the abstract room area.

Open all doors and drawers

The table should not interfere with the refrigerator, dishwasher, lower cabinets, or interior door. Mark the open position of the fronts. The ST-026-1 square often wins precisely because it can be shifted while maintaining access.

Consider the radiator and windowsill

A table near the window should not block radiator maintenance or hit a protruding windowsill. The height of the future table depends on the frame and the 25 mm thickness. Check if the edge ends up at a level that interferes with opening the window.

Check all four sides, even if the table is against the wall

Today the table may be pushed against the wall, but tomorrow extra space may be needed. With a square model, it's easier to free up all four sides. A rectangular one is often placed with the long side against the wall, and then part of the area advantage is lost. You need to decide in advance whether the furniture will be moved.

Make a mockup in two versions

Mark 800 × 800 mm on the floor first, then increase the length to 1200 mm. Arrange chairs and walk around the room. Photograph both versions from the entrance. The photo shows which shape matches the scale of the space and does not break the route.

How to calculate seating places

Two people

Both tabletops are suitable. ST-026-1 saves space and creates a more intimate seating arrangement. ST-026-2 is useful if work items are constantly on the table or a wide table setting is required.

Three people

The square allows seating one person on three sides without an obvious head place. The rectangle provides more center space and a free end. The choice depends on the room and the width of the chairs.

Four people

For occasional meetings, ST-026-1 is suitable. For a daily family, ST-026-2 is more comfortable because four seats are distributed along the long sides, and the center is not overcrowded.

Five to six people

Consider only ST-026-2, but be sure to check the end seats and the under-table space. Wide armchairs, aprons, and legs may limit seating. Six seats are not a universal guarantee, but a scenario that is confirmed by actual chairs.

MDF, beech veneer, or oak veneer

Both tabletops have the same finish options, so the material does not determine the size. First, the buyer decides whether they need a square 800 × 800 or a rectangle 1200 × 800 mm, then chooses the appearance and finish system. This order protects against a typical mistake: buying a beautiful oak veneer, only to later discover that the table itself does not fit in the room.

MDF for opaque painting

The basic MDF countertop is suitable for white, gray, black, or colored enamel. The uniform base is convenient when the table must match kitchen facades, wall panels, doors, or other furniture. The absence of a pronounced wood texture allows color to become the main element.

MDF cannot be left without protective finishing. Edges, rounded corners, and surfaces must receive a compatible system. In the kitchen and dining area, special attention is paid to water protection. Spilled liquid should not be left on the edge or near fasteners.

For a compact kitchen, a white square countertop can visually blend in with the facades. A rectangular colored model, on the other hand, can become the main item in the room. The larger the area, the more noticeable the shade and gloss of the enamel, so a test color sample should be evaluated on a large specimen.

Beech veneer for a calm light texture

MDF with beech veneer is chosen when a natural surface with a more even and restrained pattern is needed. Beech suits Scandinavian, modern, and neoclassical interiors, where wood should add warmth but not create an active contrast.

On an 800 × 800 mm square, the calm texture supports compactness. On a 1200 × 800 mm rectangle, the longitudinal pattern can visually elongate the table. The direction of the veneer and the selection of 'sheets' should be checked in the product card and during order confirmation.

Beech veneer can be tinted or coated with a clear varnish according to the approved system. Color cannot be transferred from a photo to the finished product without a sample: lighting, base, and number of layers change the result.

Oak veneer for a pronounced wood pattern

The oak texture is more noticeable. It suits a table that should look like a standalone item and match oak doors, flooring, panels, or frames. The porous pattern shows well under clear varnish, oil, or semi-transparent tinting, if the chosen system is compatible with the product.

On ST-026-2, the large area enhances the veneer pattern. Dark tinting makes the rectangular table visually heavier, while light tinting maintains a sense of airiness. On ST-026-1, the oak pattern works more compactly and can connect a small table with the rest of the wooden furniture.

If the floor is already oak, the tabletop doesn't have to match tone for tone. Almost identical shades often clash more than a deliberate contrast. Compare real samples in daylight and evening light.

How to choose material for the style

For a minimalist kitchen, MDF in the color of the facades or light beech veneer is suitable. For a modern dining room, oak veneer with a laconic frame. For neoclassicism, you can choose enamel and a massive base, repeating the color in chairs or moldings. For an office, oak creates a more expressive desk, beech creates a calm light surface.

How to choose material for daily care

Practicality depends not only on the base but also on the finished coating. Matte enamel, varnish, oil, and tinting require different products and repairs. Before ordering, clarify who will perform the finish and how the surface will behave with water, hot dishes, ink, and household chemicals. You cannot promise the properties of an unfinished blank as the properties of a finished table.

For a more detailed comparison, you can once open the material about how to choose an MDF tabletop for a table, and then return to the size fork ST-026-1 and ST-026-2.

Which base to buy

A tabletop without a suitable base remains a blank. The base sets the final height, knee space, leg position, and stability. The ST-026 series is easier to assemble with the corresponding frames because their dimensions are coordinated with the shape of the tabletops.

STL-026-1 for square tabletop

The STL-026-1 frame measures 800 × 800 × 740 mm, is made of beech or oak, and is supplied unassembled with a set of fittings. Beech is chosen for enamel, oak for tinting. The geometry is designed for the square base of the series, but before installation, the drawings and attachment points should still be checked.

The height of the finished table consists of the frame and a thickness of 25 mm, taking into account the actual mounting assembly. You cannot mechanically assume that the top will be exactly the sum of the two numbers if part of the tabletop or fasteners are integrated into the structure. The drawing provides the exact value.

For compact assembly, you can buy the STL-026-1 table frame and coordinate the wood species with the selected veneer or enamel color.

STL-026-2 for rectangular tabletop

The STL-026-2 underframe measures 1200 × 800 × 740 mm, is available in beech or oak, and is also supplied unassembled with a set of fittings. It matches the length of the rectangular tabletop and creates a base for a dining or work table.

Before purchasing, check the position of the legs relative to the chairs. The end space may intersect with the apron or support. The six seating positions need to be modeled with actual chairs, not just by the external dimensions.

For a family table, you can buy underframe STL-026-2 and coordinate the finish of the solid wood with MDF, beech veneer or oak veneer in advance.

How to coordinate the veneer and the base solid wood

The veneered tabletop has an MDF base and natural veneer, while the frame is made of beech or oak solid wood. Even with the same wood species, the pattern and tone will not be completely identical. This is normal. It is important to achieve a cohesive combination: a consistent overall shade, similar gloss, and a well-thought-out direction of the texture.

If the tabletop is painted with enamel, the beech frame can be painted the same color. It is more practical to use an oak frame under a transparent or semi-transparent finish if you want to preserve its grain. It is best to give all elements to one finisher with an approved sample.

Can I use a different underframe

Only after checking the size, attachment points, overhangs, stability, and load distribution. A random metal base may conflict with the 25 mm thickness or leave too large a free edge. A central support requires checking the stability of the rectangular tabletop against rotation and deflection.

If the ready-made frames of the series do not suit the style or height, it is useful to select a base and tabletop in the general category and compare the drawings.

What to buy together with the tabletop

The correct set includes a tabletop, base, fasteners, finishing system, and chairs, whose dimensions are checked in advance. Buying only the top part postpones key decisions and may lead to incompatibility during assembly.

Frame or underframe

For ST-026-1, STL-026-1 is provided; for ST-026-2, STL-026-2 is provided. They set the corresponding geometry of 800 × 800 and 1200 × 800 mm. The base material is chosen together with the tabletop finish.

Fastening

Frames come with a set of hardware, but the method of connection to the tabletop must be verified against the drawing. Long self-tapping screws cannot be added by eye: the top thickness is 25 mm, and the fasteners must not protrude onto the front surface.

Materials for finishing

For MDF, an enamel system is needed; for veneer, tinting and a protective coating according to the chosen project. The finish must cover surfaces, edges, and areas that may come into contact with water.

Chairs

The width of the chair determines the actual number of seats. Armrests increase the space occupied and may not fit under the apron. Before ordering, arrange the models around a full-size mockup.

Protective elements under legs

Glides are chosen based on the floor and frame design. They should not create different support heights. For parquet and laminate, cleanliness and the absence of hard particles are especially important.

Care products

They should be purchased after choosing the finish. The oil product does not replace care for enamel or varnish. Save the coating name and the finisher's recommendations.

How not to confuse a tabletop with similar solutions

Countertop and finished table

ST-026-1 and ST-026-2 are top parts for assembly. Without a frame, fasteners, and finish, they do not replace a finished table. The buyer needs to understand in advance who will assemble the base, how the finish will be done, and where the attachment points will be.

MDF and solid wood

The veneered countertop has an MDF base, natural veneer, and a solid wood edging around the perimeter. It looks like a wooden surface but is structurally different from a solid wood slab. This affects finishing, repair, and choice of fasteners. You cannot drill or cut the product like a random board without a drawing.

800 mm square and round countertop with a diameter of 800 mm

The same maximum width does not mean the same area and fit. The square uses corners, provides more surface area, and forms four straight sides. The circle is easier to walk around, but the central zone and distance to the edge are distributed differently. The shape is chosen based on the room and chairs.

Countertop 1200 × 800 and kitchen worktop

ST-026-2 is intended for the construction of dining and writing desks. It should not be automatically used as part of a kitchen set with a sink, hob, and constant contact with water. Such cutouts and conditions require separate verification.

Oak veneer and decorative film imitating oak

Natural veneer has a live pattern and natural variations. The film reproduces a printed decor. Externally, photos may look similar, but the methods of finishing and repair differ. The ST-026 cards indicate natural veneer facing.

ST-026-2 and URL ending with ST-026-3

On the actual page of the second tabletop, the title and specifications indicate ST-026-2, although the address ends with stoleshnitsa-st-026-3. In the order and text, you need to use the product name ST-026-2, and for the link — the current card URL. This protects against errors when coordinating the article with the manager.

Practical choice for specific situations

You need to place a table in a kitchen where every centimeter matters

Start with the ST-026-1 layout. Mark a square 800 × 800 mm, place two main chairs, and open all cabinets. If the passage remains free and four seats are only needed occasionally, the square model is more rational. A rectangle only makes sense if there is a long unoccupied wall.

You need to seat a family of four daily

ST-026-2 is usually more convenient. Four people sit along the long sides, leaving more space in the center. Check the width of the chairs and the distance between the legs of STL-026-2. If the kitchen is too small, it is better to reconsider the layout than to try to squeeze four permanent seats into an 800 mm square.

Need a table for a laptop and rare dinners

ST-026-1 is suitable if the laptop is easy to put away. Choose ST-026-2 if the monitor, documents, and equipment remain permanently. The extra 400 mm of length allows you to separate the work area from the free area.

Need to replace the old tabletop on the existing frame

Take precise measurements of the base, distances between mounting points, and overhang sizes. Matching external dimensions does not guarantee compatibility. The old frame may be designed for a different thickness or position of the crossbars. Before purchasing, attach drawing ST-026 to the base diagram.

The table needs to be assembled in one color with the kitchen.

Choose MDF for enamel and a beech frame for the same covering color. Order a test paintout and pass all details together to the finisher. Different materials may reflect light differently, so the same paint code does not guarantee the same visual result without a common technology.

A table with a pronounced oak texture is needed.

Choose a tabletop with oak veneer and an oak frame for tinting. Agree on the overall shade, but accept natural differences between veneer and solid wood. For a small room, dark oak on ST-026-2 may look heavy; light tinting will preserve the sense of space.

A table for a cafe or small meetings is needed.

Several ST-026-1 allow creating separate compact groups for two. ST-026-2 is suitable for four visitors or a meeting with documents. In a commercial interior, check stability, repairability of the coating, and the ability to replace one tabletop without changing the entire series.

A table for a children's room is needed.

The square model is convenient for drawing and activities for one or two children. The rectangular one is suitable for collaborative work and storing materials on the surface. The corners are rounded, but final safety is determined by the finish, frame stability, and absence of protruding fasteners.

It is necessary to combine a dining and a writing table.

ST-026-2 handles the dual function better. It allows you to leave the monitor on one end and free up the second. But wires, lamp, and equipment should not interfere with serving. For a small apartment, this can be more advantageous than two separate items.

Need a table for an elongated office

A rectangular model supports the shape of the room and provides a long work line. A square one suits an office where the table is placed in the center and used for conversations. Compare routes from the door to the cabinet and window.

How tabletops work in different interiors

Modern kitchen

MDF in the color of the facades creates a calm set. ST-026-1 preserves more air, ST-026-2 forms a full-fledged family zone. Rounded corners soften the laconic geometry and are convenient for passage, but do not eliminate the need to leave space around.

Scandinavian interior

Beech or light oak veneer supports a light palette and simple shapes. A square table looks intimate, a rectangular one more family-oriented. The beech frame can be left light or coated with enamel.

Neoclassicism

Enamel allows you to connect the table with paneled facades and moldings without overloading the surface with active wood. ST-026-2 is better suited for a dining room, ST-026-1 for a breakfast area or a small office.

Loft

Oak veneer creates contrast with brick, concrete, and metal. When using another metal base, compatibility needs to be checked. The ready-made wooden frames of the series provide a softer and more homely result.

Classic dining room

A rectangular shape is more traditional for family seating. Tinted oak and a massive base set an expressive table. A square one suits a small tea table or an intimate area.

Home Office

ST-026-2 provides a long surface, ST-026-1 saves space in the bedroom or living room. Matte enamel reduces visual activity, wood veneer makes the workspace warmer.

Mistakes when buying a tabletop

Choosing only by room area

The total area does not show where doors, radiators, and cabinets are located. A plan with movement routes and chairs is needed.

Thinking 1200 × 800 mm is only slightly larger

A rectangular model provides 50% more area. This is noticeable both in usefulness and in the space it occupies. The difference should be checked with a mockup.

Buying a square for four permanent seats without trying it out

Four people fit, but wide chairs and large place settings create cramped conditions. For a daily family, a rectangle is often more convenient.

Expecting six equally comfortable seats

Match shade to screen

Color depends on lighting, device, and finish. A real sample next to the floor, facades, and frame is needed.

Finish countertop and frame in different workshops without a sample

Even identical materials can have different gloss and shade. Pass the approved sample to both parties or complete the finish as a set.

Do not check the actual URL ST-026-2

Product name is ST-026-2, but URL ends with ST-026-3. Use the current link and record the article number in the order.

Place hot items and cut directly on the surface

Properties of the finished table depend on the finish. Use coasters and cutting boards. Do not transfer advertising properties of the material to a specific coating without confirmation.

Who ST-026-1 is suitable for

The square model suits a couple, one person, a small family with rare guests, a compact kitchen, and a workspace that can be quickly cleared. It is useful when passage is more important than maximum area, and the room is close to square in shape.

ST-026-1 is not suitable as the main table for a large family if four people sit daily, with equipment and documents constantly on the surface, and dishes require a central area.

Who ST-026-2 is suitable for

The rectangular model is suitable for a family of four, a home office, a dining area, and a room elongated along one axis. It helps combine meals and work and provides space for additional end seating.

ST-026-2 is not suitable for a cramped kitchen where chairs block doors and passageways. A large area does not compensate for an inconvenient layout.

When it is better to choose a different tabletop

A different size is needed if 800 mm is too small and 1200 mm does not fit; if a round shape is required; if the table is designed for eight people; if the base has a non-standard geometry or a central support. Do not trim a finished model without design approval.

In that case, you can choose a tabletop for the table and compare other shapes, sizes, and bases in the category.

How to accept the tabletop after delivery

Check the article and size

ST-026-1 — 800 × 800 × 25 mm. ST-026-2 — 1200 × 800 × 25 mm, even if the URL ends differently. Measure the sides before finishing.

Check the material

Make sure you received MDF, beech veneer, or oak veneer as per the order. On the veneer, evaluate the pattern of the entire surface, not just a small area.

Inspect the corners and edges

Damage is especially noticeable after enamel or varnish. Record it before drilling and painting.

Attach the frame

Check overhangs, axes, and access to fasteners. Do not start installation if the geometry does not match the drawing.

Care for the finished countertop

The rules depend on the coating. Enamel is wiped with a soft cloth without abrasives. Varnish and oil require compatible products. Water and colored liquids are removed immediately, hot dishes are placed on a stand, and a knife is used only with a cutting board.

Soft pads are useful under the monitor, lamp, and decor. Do not move a heavy object across the surface. If the coating is damaged, repair it with the same system, not with a random universal compound.

How to buy ST-026-1 or ST-026-2 at STAVROS

First, make two layouts in the room and choose the size. Then open the card of the desired tabletop, select MDF, beech veneer, or oak veneer, and check the current order conditions. For the square model, you can additionally read features of the 800 × 800 mm tabletop.

After choosing the top, proceed to the frame STL-026-1 or STL-026-2. Check the drawings, solid wood species, finish, and final height. Try out chairs before ordering the set.

For compact assembly, you can buy tabletop ST-026-1, and for a family or work desk — buy tabletop ST-026-2. STAVROS allows you to assemble the top and base of the same series without picking random parts with unknown attachment points.

What to Check Before Ordering

• actual outline of 800 × 800 or 1200 × 800 mm in the room;
• depth of chairs and passage behind a seated person;
• opening of doors, refrigerator, and cabinets;
• daily and maximum number of seats;
• need for a work area;
• MDF, beech veneer, or oak veneer;
• enamel, tinting or varnish system;
• frame STL-026-1 or STL-026-2;
• mounting points and length of self-tapping screws;
• knee space and end chairs;
• matching of veneer and solid wood finish;
• sockets and wire routes;
• radiator, windowsill and window;
• floor covering supports;
• current deadlines and completeness in the card;
• correct name ST-026-2 for URL ST-026-3.

How to choose size based on layout, not photo

Table in the center of the room

When a table is surrounded by a passage on all sides, a square ST-026-1 distributes free space more evenly. It suits a square kitchen, a separate breakfast area, and a room where doors are on adjacent walls. A rectangular ST-026-2 emphasizes one axis and requires more space on the long sides. If the center of the room is used as the main route, an extra 400 mm can become a constant obstacle.

To check, place four boxes at the corners of the intended outline, set up chairs, and live with the mockup for at least an evening. Evaluate not an empty room, but a typical scenario: bags on the floor, an open door, a person at the kitchen and another at the table. It is in this mode that it becomes clear whether the square saves space or creates a cramped seating.

Table with one side against the wall

ST-026-1 can be placed with its side against the wall and used by two people, freeing up three sides. When guests arrive, the table is pulled out. A rectangular model is often placed with its long side against the wall, but then fewer seats are available and part of the extra area functions as a long shelf. If the table will not be free-standing most of the time, decide in advance whether the 1200 mm size is justified.

Table by the window

Check the windowsill, radiator, curtains, and sash opening. A square is easier to shift away from the radiator. A rectangle can occupy almost the entire window line and provide a convenient work surface, but may hinder access for cleaning. For a home office, placement by the window is beneficial if light comes from the side and the screen does not receive direct glare.

Table between kitchen and living room

In the combined space, ST-026-2 can separate the dining area and become a connecting piece between the kitchen and sofa. Its long shape creates a clear boundary but should not block the route. ST-026-1 works as a compact standalone point and leaves more air between zones.

Table in a niche

A niche limits not only the tabletop but also chair movement. If the width allows placing a square, check if a person can sit from the side. A rectangle in a niche can turn into a long desk, but end seating will disappear. In this case, the number of seats needs to be recalculated.

How to check the set before finishing and final assembly

Compare the drawings

Lay out the tabletop and frame separately, compare external dimensions and mounting points. Do not drill additional holes until the purpose of each hardware element is clear. The frame is supplied disassembled, so first assemble it without excessive tightening and check the geometry.

Check the diagonals

For square and rectangular frames, diagonals help detect skew. If the base is assembled as a rhombus, the tabletop will not correct it, and the fasteners will pull the parts. Measurements are taken on a flat surface before installing the top.

Evaluate the overhangs

The tabletop should be positioned symmetrically relative to the frame according to the drawing. Uneven overhang is noticeable at the corners and affects the position of chairs. On ST-026-2, the error is more visible along the long side. Mark the center and axes before drilling.

Check the knee space

Sit on the chosen chair at the assembled frame without the finally fixed tabletop. Check the aprons, legs, and end areas. This test is especially important for a stated seating of 4–6 people: the outer perimeter may be sufficient, but the inner space may restrict the chair.

Align holes with 25 mm thickness

Any fastener must go to a safe depth. Consider washers, plates, and the thickness of frame elements. If the kit diagram is unclear, clarify it before installation. Fixing a hole that has come out on the front surface is much more difficult than selecting a screw in advance.

Perform a trial assembly before finishing

A trial assembly reveals skews, mismatches, and the need for technological access. Then the table is disassembled for finishing, preserving the marking of parts. Enamel, varnish, or tinting should not fill the threads or change the seating planes.

How to choose a finish for a daily-use table

Matte or smoother enamel

A matte surface looks calmer in a modern interior, but some shades show fingerprints. A smoother finish is easier to wipe, but it highlights unevenness and reflections more. The choice is tested on a sample, not on a small color fan.

Clear lacquer on veneer

Lacquer preserves the grain of beech or oak and creates a protective layer. The gloss level affects the perception of area: on ST-026-2, bright reflections are more noticeable. Before ordering, evaluate the sample under the same light that will be above the table.

Staining

Tinting helps tie the tabletop to the floor and frame, but natural materials react differently. Veneer and solid wood of the same species may differ. Therefore, the tabletop and underframe are treated as a set, achieving harmony rather than absolute identity.

Edge protection

The edge receives impacts from chairs, belts, dishes, and household items. Uniform coating thickness is especially important here. Rounded corners reduce the sharpness of contact but do not protect against chips from impacts.

Inspection of the finished coating

After drying, inspect the tabletop under side lighting, check for unpainted areas and roughness. Do not place appliances or dishes until the coating has reached its stated hardness. The time is determined by the manufacturer of the finishing system.

How the budget and set change when switching from 800 to 1200 mm

Switching to ST-026-2 means not just buying a larger tabletop. A longer frame is needed, more space for delivery and packaging storage may be required, and the finish covers a larger area. There are often more chairs. So compare the entire set, not just the price of the top part.

ST-026-1 may be more rational if the two extra seats are used a few times a year. ST-026-2 is justified when the additional area works daily: the family gathers together, a person works from home, documents or equipment are constantly on the table. The benefit of size should be evident in the real scenario.

How to save data for reordering

Record the article number, actual URL, material, shade, gloss level, frame model, and hardware list. Photograph the underside of the table after assembly. This will help replace the tabletop, order a second table, or restore the finish without searching for all parameters again.

For a cafe, office, or series of rooms, it is useful to create a short specification: ST-026-1 or ST-026-2, MDF or veneer, STL-026-1 or STL-026-2, color, number of chairs, and care rules. Then subsequent sets will match in size and finish.

What not to do when assembling yourself

Do not choose the size after buying chairs blindly

Chairs and tabletop form a single set. Too wide seats reduce the number of places, and deep chairs require more aisle space. First, assemble a mockup of the entire group, not just evaluate the table.

Do not drill the tabletop without a template

Marking must account for the frame axes, overhang symmetry, and safe fastener depth. One wrong hole can reach the front surface or weaken the edge. For serial assembly, a separate template is useful.

Do not force the frame into place

If the holes do not align, do not tighten the elements with a long screw until deformation occurs. First, check the diagonals, the orientation of the parts, and the completeness. A skewed base creates stress in the tabletop and wobbling of the finished table.

Do not leave untreated areas

Even the underside and edges need coordinated protection. Different treatment of surfaces can affect the appearance and behavior of the material. The finishing system is assigned for the entire part, keeping only the mounting areas clean.

Do not change the purpose without rechecking

A table assembled as a compact workspace may later become a dining table, but the coating, stability, and fit must match the new function. Similarly, ST-026-2 used as a work table does not automatically become a kitchen surface for continuous cooking.

Do not discard drawings and markings

After assembly, keep the documents, packaging label, and finishing data. They will help to correctly disassemble the table during a move, replace fasteners, and order a compatible part without guesswork.

How to make a final decision between two sizes

Compare not abstract characteristics, but two ordinary days. In the first scenario, the table is used by two people, most of the surface is free, and passage is more important than rare guest seats. Here, ST-026-1 retains more utility per occupied centimeter of the room. In the second scenario, four people eat at the table daily, someone works with a laptop, and dishes or study materials are constantly in the center. Here, ST-026-2 justifies the extra length.

After the layout, write down three answers: how many permanent seats are needed, what is stored on the surface, and which passage cannot be blocked. If all three answers point to compactness, choose the square. If the extra area will be used every day, choose the rectangle. Such a simple filter is more reliable than the desire to buy a larger model "just in case."

The final configuration is confirmed together: the tabletop, underframe, chairs, and trim. Only after this does it make sense to place the order and send the set for assembly.

Before placing an order, it's useful to photograph both layouts from the same point and compare them side by side. The photo clearly shows which table supports the room's scale, doesn't block the passage, and doesn't look accidentally small. Save the chosen scheme with dimensions, chair positions, and frame model: it will be useful for the installer and finisher.

Such a check takes a few minutes but helps avoid returns, frame rework, and buying chairs that don't fit under the chosen tabletop.

The final decision should be comfortable in the room daily, not just look advantageous in a photo.

Frequently asked questions

How does ST-026-1 differ from ST-026-2?

ST-026-1 has a square size of 800 × 800 × 25 mm, ST-026-2 is rectangular 1200 × 800 × 25 mm. The second model provides 50% more area and requires a longer free zone.

Which tabletop is better for a small kitchen?

Most often ST-026-1. It takes up less space along the wall and fits more easily between doors and cabinets. Before buying, make a layout with chairs.

Will ST-026-1 fit four people?

Yes, as a periodic scenario. For four permanent seats, an 800 mm square can be cramped, especially with wide chairs and large place settings.

How many people can sit at ST-026-2?

Four people fit more comfortably, additional end seats allow seating up to six occasionally. The actual result depends on the chairs and frame.

Can ST-026-1 be used as a desk?

Yes, for a laptop, lamp, and a compact set of documents. For a permanent monitor, printer, and a large work area, ST-026-2 is better.

What is the area of the tabletops?

The area of ST-026-1 is 0.64 m², ST-026-2 is 0.96 m². The rectangular model is larger by 0.32 m², i.e., by 50%.

Are the widths of the models the same?

Yes, both have a width of 800 mm. The length differs: 800 and 1200 mm.

What is the thickness of the tabletops?

Both models have a thickness of 25 mm. The fasteners are selected so that they do not protrude to the front side.

What materials are available?

MDF, MDF with beech veneer, and MDF with oak veneer. The current configuration is selected in the product card.

What to choose for white enamel?

Basic MDF. It is suitable for opaque painting and allows you to match the table with facades or other furniture.

What to choose for a natural texture?

Beech veneer for a calm pattern or oak veneer for a more pronounced texture. The final shade is checked against a sample.

Which base is suitable for ST-026-1?

Frame STL-026-1, size 800 × 800 × 740 mm, made of beech or oak. It is supplied unassembled with a set of fittings.

Which base is suitable for ST-026-2?

STL-026-2, size 1200 × 800 × 740 mm. It is also made of beech and oak and is supplied unassembled.

Can the tabletop be placed on a different base?

It can be done after checking the drawing, overhangs, attachment points, stability, and legroom. A random base may not fit.

Why does the URL for ST-026-2 end with ST-026-3?

That's how the actual page address is structured. In the name and specifications, the product is listed as ST-026-2, so the order uses that name, while the link remains unchanged.

Can the tabletop be trimmed?

Self-trimming may damage the edging, veneer, and edge geometry. It's better to choose a ready-made size or arrange modification with a specialist.

Does the tabletop need finishing before installation?

A trial fitting is done in advance, then the product is finished and installed after complete drying. Seating areas and holes are protected from excess layers.

Is ST-026-2 suitable for a home office?

Yes. The 1200 mm length allows you to place a monitor, laptop, documents, and keep a free part of the surface.

Can ST-026-2 be used as a dining table?

Yes, the card directly links the model to dining and writing desks. For seating, check the chairs and frame.

How to know if the passage is wide enough?

Mark the table, place the chair, seat a person, and try to walk behind them. Room dimensions alone are not enough.

What should you buy together with the tabletop?

Frame, fasteners per drawing, finish system, chairs, glides, and care products for the selected coating.

Where to buy ST-026-1 and ST-026-2?

Both models are presented in separate STAVROS cards. First select the size, then the finish and compatible underframe.

Result: square 800 × 800 mm or rectangle 1200 × 800 mm

ST-026-1 and ST-026-2 have the same thickness, same width, and same finish options, but solve different layout tasks. The square top 800 × 800 mm preserves passage, suits two regular users and occasional seating for four. The rectangular 1200 × 800 mm provides 50% more area, more convenient for a family of four, serving, and working.

The choice should start with a full-size mockup and real chairs. After that, determine MDF, beech or oak veneer, frame STL-026-1 or STL-026-2, and finish system. This order helps avoid a situation where a beautiful set formally fits but interferes with doors and passage.

STAVROS offers both tabletops and corresponding bases in the same series. For a compact kitchen or study, you can buy tabletop 800 × 800 mm in the required design. For a dining and work table, you can buy tabletop 1200 × 800 mm and assemble a set with a rectangular underframe. A conscious choice of size provides more benefit than buying the largest surface without checking the room.