Wooden discs and washers with hole buy: how to choose KN-007, KN-009 and KN-010 for furniture posts

Buy wooden discs and washers with a hole it is worth it not for a single round blank, but for a precise node in a modular stand, furniture support, leg, baluster, or decorative partition. A flat or three-dimensional element on a common axis separates large shapes, covers the transition between parts of different diameters, forms a base, and helps assemble a sequence that looks not like a random set of balls and bushings, but like a well-thought-out structure.

At the same time, the STAVROS wooden washer has nothing to do with a metal fastening washer for a bolt. It does not tighten the connection or distribute the force under the nut. It is a decorative and structural part made of solid wood with a central hole of 34 mm, designed for installation on a compatible wooden rod, post, or other axis of the same diameter. Its function is determined by its shape and place in the composition.

The difference between the three models is especially clear in the line. KN-009 is a compact ring 22 × 62 × 62 mm, which adds almost no volume and neatly shapes the transition. KN-007 is a rounded washer 44 × 120 × 120 mm, already perceived as an independent "belt" or roller. KN-010 is a flat wide disc 23 × 147 × 147 mm, creating a base, lid or noticeable horizontal pause.

All three parts have a 34 mm hole, are made of beech or oak, and are available with "Prestige" sanding quality. However, the same fit does not mean the same purpose. To get a stable and expressive node, you need to consider the diameter, height, visual scale of adjacent elements, material, finish, and overall size of the post. In the STAVROS section, you can buy wooden construction set elements, and then select a specific disc or washer for the project.

Geometric shape KN-007

from 22.57 $

Geometric figure KN-009

from 9.27 $

Geometric figure KN-010

from 18.66 $

Go to Catalog

What is a wooden disc with a hole?

A wooden disc with a hole is a turned part that is placed on an axis and becomes part of a multi-element structure. Unlike a decorative circle for painting or a plywood blank, it has a precise mounting hole, a specified thickness, and a processed furniture profile. The buyer receives not a flat sheet circle, but a ready-made module for a stand, leg, support, rod, or baluster.

Such a part works simultaneously in two planes. Structurally, it connects adjacent shapes on a common axis and covers the transition point. Visually, it creates a horizontal line that stops the eye and divides the vertical into parts. The wider the disc, the stronger this line. The taller and more convex the profile, the more it is perceived as a separate volume.

Watch video ...

Why the hole is in the center

Central mounting preserves the common axis. The ball, cube, bushing, and disc are positioned symmetrically, so the finished stand does not look skewed. The 34 mm hole corresponds to the unified system of the constructor. This allows combining several models without designing an individual connection for each pair of parts.

However, the phrase "34 mm hole" does not replace actual measurement of the axle. Before ordering, check the diameter of the rod or post. Too loose a fit creates play and visible misalignment; too tight a fit can damage the edge or make assembly impossible after coating is applied.

Our factory also produces:

Wooden Cap L-066

from 132.60 $

Wooden Cap L-022

from 16.83 $

Wooden Handrail L-082

from 35.01 $

Wooden socket R-083

from 31.72 $

Wooden Baluster L-045

from 61.12 $

Wooden baluster L-038

from 61.60 $

Wooden baluster L-047

from 66.36 $

Wooden Plate KU-001

from 11.83 $

View Full Product Catalog

How a decorative washer differs from a fastening washer

A fastening washer works inside a bolted connection and is usually hidden or perceived as a technical part. The KN wooden washer remains visible. Its outer diameter, profile, and wood species influence the furniture style. It can be painted to match the post's overall color or, conversely, highlighted with a stain.

It is important for the buyer not to look for such a part among hardware and not to expect it to provide mechanical fastening on its own. The fixation of elements on the axle, the method of connection to the base, and the permissible load are designed separately. The disc is responsible for the shape of the assembly and compatibility within the system, not for replacing fasteners.

Confirmed specifications for KN-007, KN-009, and KN-010

In the table, A denotes the height of the part along the axis, B and C are the external transverse dimensions, D is the hole diameter. All three models have D equal to 34 mm, but the outer diameter varies by more than a factor of two: from 62 mm for KN-009 to 147 mm for KN-010. Therefore, the parts are compatible in fit but create fundamentally different proportions.

The "Prestige" quality refers to careful surface grinding. For a small washer, this is especially important: a chip near the hole or a scratch on the outer profile is immediately noticeable. However, after additional trimming, drilling, or machining, the buyer must re-prepare the modified area. The finished grinding does not protect against damage during improper assembly.

KN-007, KN-009 or KN-010: which to choose

KN-007 — voluminous medium accent

KN-007 has a height of 44 mm and a diameter of 120 mm. Unlike a flat disc, it has its own rounded profile. On a post, this part looks like a wide roller or belt. It can smooth the transition from a thin axis to a large ball, complete the lower part of a support, or separate two voluminous elements.

KN-007 should be chosen when a small washer looks too technical and a wide 147 mm disc seems overly massive. It works well in a medium-thickness furniture leg, decorative rod, bed post, console support, or assembled baluster. For purchase, you can buy a wooden washer KN-007 with a diameter of 120 mm and immediately check the material, finish, and 34 mm fit.

KN-009 — thin separation without extra volume

KN-009 has a height of 22 mm and a diameter of 62 mm. It is the most delicate of the three options. It hardly increases the overall width of the structure and does not conflict with large spheres, cubes, and elongated shapes. Its task is to mark the joint, create a neat belt, and separate one volume from another.

Such a part is convenient in small furniture legs, stands 600–800 mm high, rods, and structures where a large disc would look heavy. Several identical KN-009s can set a repeating ring rhythm. If you need a minimal separator, you can buy a thin wooden washer KN-009 and use it as a transition between larger modules.

KN-010 — wide base or finish

KN-010 is only 23 mm high but 147 mm in diameter. It is the most horizontal shape in the group: small height and large width. On a vertical post, such a disc is perceived as a base, decorative foot, cap, or a wide pause between volumetric elements.

KN-010 is suitable for large furniture supports, bed posts, partitions, custom columns, and decorative balusters. It is noticeable even from a distance and can visually "ground" a thin axis. For a large node, you can buy a wide wooden disc KN-010 with a diameter of 147 mm, but before that, check if the disc will extend beyond the dimensions of the furniture or passage.

How to choose the diameter of a wooden disc

The diameter determines how much the part protrudes beyond the axis and adjacent elements. On a 34 mm rod, KN-009 with a diameter of 62 mm leaves 14 mm of wood from the edge of the hole to the outer contour. KN-007 protrudes significantly more, while KN-010 forms a wide plane of almost 150 mm. The same rod, thanks to these parts, can look thin, medium, or monumental.

Diameter 62 mm for a thin transition

KN-009 is chosen when the disc should frame the joint but not become an independent center of the composition. It fits between two large parts, at the edge of a rod, at the top of a furniture leg, or next to a cube. The small diameter preserves lightness and does not increase the dimensions of the furniture.

Such a separator is especially useful in compact cabinets, consoles, headboard stands, and small supports. If a wide disc is used in every transition, the structure will quickly become heavy. KN-009 allows large elements to keep the main role.

Diameter 120 mm for medium accent

KN-007 already noticeably protrudes beyond the axis. It is chosen for a stand where a smooth, rounded transition is needed. The 120 mm diameter pairs well with medium-sized spheres and cubes but does not require the space needed for KN-010.

In a furniture support, KN-007 can be placed at the base, but it creates a soft roll rather than a wide sole. In the middle part of the stand, it works as a belt separating elongated and spherical shapes. Several KN-007s in a row create a pronounced repetition, so their number needs to be controlled.

Diameter 147 mm for large base

KN-010 is chosen when a wide horizontal plane is required. It can visually support the weight of the stand, cover the transition to the base, or form a large finish. On a small furniture leg, a 147 mm diameter disc can extend beyond the edge of the body, so its dimensions are checked on the plan.

A wide disc is especially appropriate in beds with decorative posts, large consoles, partitions, and interior supports. It reads well in neoclassical and art deco styles. In strict minimalism, such a shape may be too active.

Why the 34 mm hole needs to be checked before ordering

Compatibility of parts is built around a single axis. If the rod is indeed 34 mm in diameter, KN-007, KN-009, and KN-010 can be combined in one structure. But the coating, wood moisture, actual size of the old rod, and traces of previous treatment can affect the fit.

Too loose fit

Play manifests as misalignment and a visible gap around the axis. During vertical assembly, the part may shift downward, and during horizontal assembly, it may rotate. Attempting to fill a large gap with a random amount of glue does not replace precise compatibility.

Too tight fit

If a part has to be hammered in, the edge of the hole may chip. After applying enamel or varnish, the diameter of the mounting channel decreases even further. Therefore, the hole is not covered with a thick top coat unnecessarily, and a test assembly is performed before painting.

How to measure the axis

The diameter is checked with a caliper at several points. An old stand may be oval, worn, or covered with several layers of paint. If the measurement differs from 34 mm, the specialist decides whether the axle can be prepared, whether a new rod is needed, or whether the project requires a different system.

Why you cannot bore a hole by eye

Uneven increase in diameter shifts the center. The disc becomes eccentric, and this is especially noticeable with KN-010: the wide round surface shows even slight runout. Any modification must maintain alignment and a clean edge.

Where wooden discs and washers are used

Stacked furniture legs

In a furniture leg, discs separate large volumes and shape the transition to the body or floor. KN-009 is suitable for thin belts, KN-007 for a medium base, KN-010 for a wide decorative sole. But the outer disc does not replace the calculated attachment of the leg to the furniture.

For a cabinet or console, it is especially important that the parts are positioned identically on all supports. Even a difference of a few millimeters in height will be noticeable in a row. Therefore, legs are assembled using a template and the height of each module is calculated in advance.

Bed posts

On a headboard post, KN-010 can form a wide base or top finish. KN-007 adds a rounded belt, and KN-009 separates a sphere, cube, and elongated part. It is important that the large disc does not interfere with the mattress, textiles, or passage near the bed.

Decorative partitions

On vertical partition axes, washers create repeating horizontal lines. KN-009 hardly adds weight to the structure, KN-007 makes each post more noticeable, KN-010 forms large bases. For a series of several posts, all parts must be positioned at the same height.

Balusters and interior posts

In the baluster, the disc separates the lower, middle, and upper parts. The wide KN-010 creates architectural "layering," the rounded KN-007 softens the transition, and KN-009 works as a thin belt. If the baluster serves as a protective railing, decorative elements do not negate structural calculations.

Decorative rods

On a horizontal rod, KN-009 creates a light dotted rhythm, KN-007 creates volumetric accents, and KN-010 creates wide vertical discs, clearly visible from the side. Their position must account for brackets, suspended elements, and actual load.

Custom Furniture

Discs are used in consoles, stands, dressers, tables, coat racks, and decorative frames. They help turn an ordinary axis into a custom support without ordering a single turned part. The buyer can replace one module or change the sequence while maintaining the overall 34 mm fit.

How to combine washers with balls, cubes, and bushings

A disc is rarely used alone. Its purpose is revealed alongside other shapes. A sphere creates soft volume, a cube creates strict geometry, an elongated figure creates vertical movement, and a bushing creates a technically neat transition. The washer separates these parts and prevents them from merging.

Pattern "ball — thin washer — ball"

KN-009 between two balls creates a minimal gap. The adjacent rounded shapes remain dominant, but a clear boundary appears between them. This sequence is suitable for a classic furniture leg and a compact stand.

Pattern "cube — KN-007 — ball"

A cube and a ball differ sharply in geometry. The rounded washer KN-007 softens the transition and creates an intermediate volume. Without it, the straight edges of the cube and the spherical surface may appear randomly connected.

Scheme "KN-010 — elongated shape — KN-010"

Two wide discs frame the vertical element from above and below. This creates an architectural module with a base and a cap. This scheme suits a large post but requires sufficient space: two discs with a diameter of 147 mm set a noticeable dimension.

Scheme "KN-009 — cube — KN-009"

Thin rings highlight the cube and preserve its strict character. They do not compete with the straight edges and help separate the cube from the round axis or adjacent turned elements.

Mixing KN-007 and KN-009

These parts can be combined: a large belt marks the main boundary, thin washers mark secondary transitions. The main thing is not to use them chaotically. The hierarchy should be clear: where the base is, where the center is, where a small pause is.

How to calculate the number of discs for one post

The quantity depends not on the length of the axis itself, but on the chosen sequence. First, determine the total height of the post, then subtract the height of the base, fastening zones, and large elements. The remaining space is distributed between washers and straight sections.

Sum of heights along the axis

Each KN-009 adds 22 mm, KN-010 adds 23 mm, KN-007 adds 44 mm. Five thin KN-009 will take up 110 mm, and three KN-007 will take up 132 mm. This difference is important: several small parts can occupy the same height as one large module.

Symmetry

For a classic post, paired placement is often used. If KN-010 is at the bottom, a second such disc can finish the top. KN-009 on both sides of the central ball supports symmetry. But an asymmetrical composition is also acceptable in modern furniture if it is shown in the drawing.

Repeatability of multiple supports

For four furniture legs, the quantity is multiplied by four. If each leg contains two KN-009 and one KN-007, eight thin washers and four volumetric discs will be required. Add a reserve for trial finishing or accidental damage, especially if the batch is to be tinted.

Height allowance

Assembling the structure flush is risky. The thickness of the glue layer, mounting pads, and actual tolerances can change the result. First, do a dry assembly, measure the actual height, and only then fix the elements.

The general principle of the sequence is explained in more detail in the material how to assemble a stand from wooden elements. It helps to understand the construction system, but the specific calculation of height and load remains part of the furniture project.

Beech or oak for the wooden washer

For a small element, the material seems secondary, but in a repeating stand the difference is noticeable. Beech gives a calm surface and is suitable for opaque painting. Oak retains expressive texture, especially on the wide planes of KN-010 and the rounded profile of KN-007. The choice must be coordinated with adjacent parts: mixing species without intent looks like a configuration error.

Beech for enamel

A beech part is convenient when the entire stand is painted in one color. On KN-009, smooth enamel makes the ring almost invisible as a separate material, leaving only a neat relief. On KN-010, the large plane turns into a clean geometric disk without active wood grain.

Beech is especially appropriate in white, gray, graphite, and colored furniture supports. But preparation "for enamel" does not mean that the part already has a finished coating. Before ordering, clarify in what form the selected line is supplied and who will perform the painting.

Oak for tinting

Oak is chosen when it is important to show the natural texture. On KN-010, the texture is visible on the large surface, so the disk becomes a full-fledged wooden accent. On KN-009, the pattern is concentrated on a small ring and creates a subtle but rich detail.

The tint is tested on a sample. The disc, ball, and shaft may absorb the compound slightly differently due to fiber direction and surface shape. It is better to coat all elements with one batch of materials than to tint them on different days without a saved recipe.

Can beech and oak be mixed

Technically, parts with the same hole can be assembled on one shaft, but visually such a set requires meaningful contrast. Beech under dense enamel and oak under a transparent finish next to each other look like two different materials. This is acceptable in custom furniture if repeated in other nodes. For a standard stand, it is safer to choose one wood species and a unified finishing system.

Practical choice for specific tasks

Need to design the base of a furniture stand

For a large support, start with KN-010. The 147 mm diameter creates a wide base and makes the vertical visually stable. Check if the disk fits within the cabinet dimensions and does not obstruct passage. For a softer, medium-width base, KN-007 is suitable.

Need to separate the ball and cube

KN-009 creates a thin border, keeping the sphere and cube as the main elements. KN-007 adds an intermediate volume and softens the sharp change in geometry. The choice depends on whether you need an almost imperceptible pause or an independent rounded belt.

Need to assemble four identical legs

First, assemble one dry model and measure it. Then prepare a template for the placement of all parts. Buy the same number of discs for each leg and a reserve for a test coating. Do not assemble the legs from memory: a slight shift of KN-009 will be noticeable in the overall line of the furniture.

The bed post needs to be made more expressive

KN-010 at the base or at the top creates an architectural accent. KN-007 in the middle adds a rounded belt. Watch the diameter: a wide part should not catch the mattress, bedspread, or passage. For a small bed, KN-009 may be sufficient and more proportionate.

A decorative partition needs to be designed

For repeating posts, the same height of all discs is important. KN-009 allows adding several thin belts without significant weight increase. KN-007 creates a noticeable rhythm. KN-010 at the base is suitable for large partitions but requires checking the distance between adjacent posts.

A technical joint needs to be covered

If parts of different diameters are joined on an axis, a compact KN-009 often solves the problem most neatly. It hides the sharp border and does not create a new large volume. But the washer should not mask a design flaw: the joint must remain reliable and coaxial.

You need to assemble an Art Deco style support

KN-010 works well as a wide geometric plane, KN-007 as a rounded intermediate roller. Combined with a cube and elongated elements, an expressive multi-part support is obtained. To prevent the composition from becoming overloaded, KN-009 is used as a small pause between the main accents.

You need to get a minimalist stand

Use a small amount of KN-009 and a straight axle. Wide KN-010 and bulky KN-007 can disrupt the restrained character. Minimalism does not exclude decorative transitions, but each of them must have a clear function.

What to buy together with discs and washers

A disc by itself rarely forms a finished product. A modular stand requires a compatible axle, large elements, bushings, a base, and a fastening unit. In the article, links are only placed to confirmed pages from the diagram, so the remaining components are listed without fictitious addresses.

Before purchasing, make a full row on paper. Write down the article number of each module, height along the axis, quantity, material, and finish. Such a list helps to understand how many KN-009 will be needed between the balls, whether KN-007 is needed as a middle transition, and whether KN-010 is too wide for the chosen furniture.

How not to confuse wooden discs with similar products

Decorative washer and metal fastener

KN-007, KN-009, and KN-010 are not used as regular washers under a nut. They are significantly larger, remain visible, and are installed on the axle as part of the design. The mechanical connection is designed separately.

Solid wood disc and plywood circle

A plywood circle is usually cut from a sheet, has a layered edge, and may be intended for crafts or painting. The KN element is turned from solid wood, has a furniture profile, and a precise central hole of 34 mm. These products serve different purposes.

Wooden disc and wheel for toy

The wheel is designed for rotation and has a different hub geometry. KN works as a stationary decorative module. It cannot be used in a mechanism if the card does not confirm such purpose.

Washer and bushing

The washer is wider relative to its height and creates a horizontal line. The bushing is usually more elongated along the axis and forms an extended transition. KN-009 is close to a ring, but is still perceived as a low separator.

Base and load-bearing support

KN-010 visually widens the bottom of the post, but the wide shape itself does not guarantee stability. Furniture support must have a calculated connection with the body and floor. A decorative disc does not replace a structural platform, metal fastener, or base.

What not to make from scratch if there are ready-made STAVROS elements

For a custom post, it is not necessary to turn each disc on a lathe, independently achieve an identical hole, and repeat the profile on several legs. Ready-made KN-007, KN-009, and KN-010 already have coordinated dimensions and a 34 mm fit. This reduces the risk that one washer will be wider, another taller, and the holes offset relative to the center.

There is no need to search for random wooden circles and bore them for an axle. Such modification often results in chips, an oval hole, and uneven thickness. In furniture, repeatability is more noticeable than in a single craft: four legs must match in height and pattern.

The commercial route is simpler: select a ready-made part → check the 34 mm axle → choose balls, cubes, and bushings → calculate the total height → select beech or oak → perform a dry assembly → coordinate the finish and fasteners. The buyer focuses on proportions and installation, not on manufacturing each module.

Mistakes when purchasing and assembling

Buying by the word "washer" without checking the purpose

A person expects a small fastener and receives a decorative part with a diameter of 62, 120, or 147 mm. In the product card, you need to look at all four dimensions and understand the part's role in the stand.

Ignore the outer diameter

The hole is the same for all models, but the overall size differs. KN-010 may extend beyond the edge of the cabinet or obstruct passage. A mock-up of the full diameter on the furniture helps avoid mistakes.

Considering KN-009 a reduced version of KN-010

The difference is not only in size. KN-009 is a spacer ring, KN-010 is a wide plane. They cannot be thoughtlessly substituted for each other while maintaining the same composition.

Painting the hole with a thick layer

The coating reduces the mounting diameter. The part no longer fits freely onto the axle, and attempting to hammer it damages the edge. The mounting area should be protected and checked before final assembly.

Assembling without a dry fit

After applying glue, changing the sequence is difficult. First, arrange the elements on the axle, measure the height, and evaluate proportions from all sides. Only then secure them.

Ignore washer height

Several thin parts noticeably increase the overall length. Five KN-009 give 110 mm. If the stand is designed to be tight, the result may not fit into the furniture unit.

Mixing species without a project

A beech washer for enamel and an oak ball for tinting create a strong contrast. It may be intentional, but random mixing looks like a mistake. The material is fixed in the specification of each part.

Using a disc as a guarantee of stability

A wide KN-010 looks like a base, but stability depends on the fastening, actual support area, and load. Decorative shape does not replace engineering calculation.

Order the exact quantity without reserve

For four identical legs, one damaged washer will stop assembly. A reasonable spare is useful for complex tinting or a large object, but the reserve must match in material and finish.

Comparing only the price of one part

Small KN-009 and wide KN-010 solve different tasks. A more affordable washer will not replace the base, and a large disc is not needed in every transition. First choose the function, then compare the cost of sets.

Who KN-007, KN-009, and KN-010 are suitable for

These parts are suitable for furniture makers, designers, custom furniture manufacturers, and customers who assemble modular shelving units from compatible modules. They are useful when precise fit, repeatability of multiple supports, and the ability to choose beech or oak are important.

KN-009 is suitable for projects requiring a delicate transition. KN-007 is for medium-scale stands with rounded shapes. KN-010 is for large supports and architectural compositions. The three models can be used together if each has a clear role.

When it is better to choose a different element

Washers are not suitable if a large spherical volume, a cube with straight edges, or a long bushing is needed. They also do not replace metal fasteners, a ready-made furniture leg, or a calculated load-bearing platform. For a children's craft or decoupage, KN products may be unjustifiably specialized.

If the axle has a diameter other than 34 mm, do not purchase the part hoping to quickly bore out the hole. It is better to select a compatible system or order professional modification that preserves the center and geometry.

How to prepare parts for assembly

Even with a precise fit and good sanding, do not start with glue. All elements are first assembled dry. This allows you to check the sequence, overall height, diameter of adjacent shapes, and how wide discs look relative to each other.

Make a template

For repetitive stands, use a ruler, stops, or a marking strip. It shows at what height KN-009, KN-007, and KN-010 are located. Without a template, parts gradually shift, and the finished row looks uneven.

Finishing: enamel, tinting, and surface protection

When to paint parts

First, perform a dry fit. Then parts can be finished separately or after assembly — the choice depends on the technology and accessibility of all surfaces. The mounting hole is protected from excess coating. Glue joint areas must also meet the requirements of the chosen compound.

Test sample

A scrap or spare part helps check the color, gloss, and behavior of the coating. This is especially important for oak: tinting on flat KN-010 and rounded KN-007 may be perceived differently due to grain direction and lighting.

Single batch of coating

Several identical legs are painted with the same compound and under the same conditions. A difference in shade on a small washer may seem insignificant, but in a row of eight or twelve parts, it becomes noticeable. The recipe and sample are kept for future repairs.

Wide disc protection

KN-010 has a large horizontal surface where dust settles and scratches may appear. The finish coating must match the place of use. At the base of the furniture, the disc may also come into contact with wet cleaning, so the bottom edge cannot be left untreated.

How to care for wooden discs in finished furniture

Care depends on the coating. Enamel is cleaned with a soft cloth without abrasives. Tinted oak is maintained with products compatible with varnish or oil. Water should not accumulate in the joint between the disc and the axle.

KN-009 hardly forms a horizontal platform, while KN-010, on the contrary, collects dust on a wide surface. When cleaning, do not pull on decorative parts and do not use them as a handle for moving furniture. If the washer starts to rotate or play appears, check the connection rather than masking the problem with a new layer of coating.

How to buy wooden discs and washers on the STAVROS website

Start by defining the role. If you need a thin transition, open KN-009. For a voluminous belt, KN-007. For a wide base, KN-010. Then choose beech or oak, preparation for enamel or tinting, and check the hole size of 34 mm.

After that, compile a complete list of the structure. It includes the axle, large modules, number of discs, fastening unit, and finish. Only then does the price of individual cards turn into a clear budget for a stand or furniture support.

In this section, you can select wooden discs and washers for furniture and compare them with balls, cubes, bushings, and other construction kit elements. Before payment, current availability, delivery times, and the selected configuration must be checked directly in the product card.

What to Check Before Ordering

• exact article: KN-007, KN-009, or KN-010;
• size A × B × C × D;
• actual axle diameter 34 mm;
• part role: separator, belt, base or finish;
• total height of the assembled stand;
• number of parts per support and per entire furniture set;
• material — beech or oak;
• preparation for enamel or tinting;
• compatibility with adjacent balls, cubes, and bushings;
• sufficient space for a 147 mm diameter disc;
• mounting method and permissible load;
• Reserve for trial finishing and possible repair.

How to evaluate the finished structure after assembly

Look at the rack from the front and side. All discs must remain coaxial, and the repeating KN-009 must be at the same height. KN-010 should not appear offset relative to the center, because the wide plane especially emphasizes eccentricity.

Check for gaps between parts, glue drips, chips at holes, and unpainted areas. The furniture should stand without wobbling, but this property is ensured by the entire structure, not just the decorative washers. After the first days of use, the joints are inspected again.

How discs change the character of the same stand

One axis and identical large elements can look completely different depending on the chosen washers. If you place KN-009 between the balls, the stand will remain light and elongated. KN-007 will make each transition rounded and noticeable. KN-010 will turn individual levels into wide architectural belts.

Light vertical

For a slender stand, a small number of KN-009 is used. The discs do not extend far beyond the dimensions of the balls and bushings, so the eye moves vertically. This option suits modern furniture, thin console legs, and partitions where it is important to maintain an airy feel.

Classic multi-part support

KN-007 creates a more plastic transition. The rounded washer pairs well with balls, cones, and turned elements. The post acquires pronounced belts that resemble traditional furniture supports and balusters but remain assembled from ready-made modules.

Architectural column

KN-010 sets horizontal planes. One disc at the base makes the stand visually more stable, two discs at the top and bottom turn the central element into a separate tier. This composition suits large furniture, bed posts, representative partitions, and interior supports.

Combined system

In a complex structure, wide and thin parts are distributed hierarchically. KN-010 marks the base, KN-007 the main transition, KN-009 the secondary joints. If all three models are used with the same frequency, the composition will lose accents and become overloaded.

Application in different rooms and interior tasks

Bedroom

Discs are often used in headboard stands, decorative supports for bedside furniture, and consoles. KN-009 is suitable for a calm modern bedroom where details should not distract from textiles. KN-007 supports a classic or neoclassical bed. KN-010 at the base of the stands makes the headboard more architectural.

Before choosing, check the distance to the mattress, nightstand, and passage. A wide disc with a diameter of 147 mm should not catch the bedspread or protrude into the movement area. On a small headboard, a large detail can visually reduce the free space.

Living room

In the living room, the modules are used in the supports of a console, coffee table, decorative partition, and lamp stand. KN-010 looks good in a large console viewed from a distance. KN-009 suits delicate furniture and does not clash with the sofa, carpet, or other items.

Hallway

Here, the discs can be part of a floor coat rack, bench, or decorative screen. The lower elements require a protected finish because wet cleaning is done nearby and shoes often touch them. KN-010 creates a wide base, but its horizontal surface requires regular cleaning.

Cabinet

Oak discs for tinting are paired with a desk, library, and wooden panels. KN-007 suits a massive support, KN-009 suits a delicate lamp stand or console. In a study, the difference in finishing quality is especially noticeable under side lighting.

Children's room

Any assembled stand must be securely fastened, and decorative elements must not have sharp chips or play. Washers are not used as toys or rotating parts. For children's furniture, the structure must be calculated by a specialist, especially if the stand bears a load or is located near a bed.

Restaurant, salon, and showroom

In a commercial interior, repeating discs help create a recognizable system of stands, partitions, and supports. KN-009 forms a calm, regular rhythm, KN-010 forms a noticeable architectural line. With a large number of parts, it is especially important to order the same wood species and finish the entire batch in one cycle.

How to calculate the budget for a set

The price of one disc says little about the cost of a finished stand. For calculation, you need to know the number of parts per module, the number of identical supports, and a reserve. Then add the axis, large geometric elements, finish, fasteners, and labor.

Example for four legs

Suppose each leg contains two KN-009 and one KN-007. For four legs, eight KN-009 and four KN-007 are required. If one full spare set of parts is needed, the total increases by two thin and one large washer. Prices are taken from the current cards of the selected material.

Example for one large stand

A rack can include two KN-010, two KN-009, and one KN-007. Here, the cost of wide discs will be a significant part of the budget, but they also create the main visual effect. Replacing KN-010 with KN-009 will reduce the price, but will completely change the proportions and function of the node.

Finishing and assembly

Small parts are quickly painted individually, but with a large quantity, time increases for sorting, protecting holes, drying, and checking for uniform color. Assembling four legs requires a template and height verification. These tasks are included in the estimate, not considered a free addition to the purchase of modules.

Storage and transportation of small parts

Small washers are easy to lose or mix up between kits. After receiving, they are sorted by article number and material, checking the quantity and edge condition. For four identical legs, it is convenient to create four labeled bags with a complete set of modules.

KN-010 is stored horizontally on a flat surface. Heavy objects with point support should not be placed on the wide disc. KN-009 and KN-007 protect against impacts from metal fasteners and tools, because a chip near the hole will be visible after assembly.

Before finishing, parts are kept in conditions suitable for wood. A sharp change in humidity can affect the fit. If modules are delivered from a cold warehouse, they are allowed to acclimate indoors before precise fitting and coating application.

How to prepare a specification for the craftsman

The document lists the sequence from bottom to top, for example: KN-010 — straight axis — KN-009 — ball — KN-007 — cube — KN-009. Next to each, the height of the part, material, and color are recorded. For multiple supports, the number of repetitions is added.

The diagram should show not only the article numbers but also the position of the discs relative to the furniture body. A KN-010 with a diameter of 147 mm may partially go under the apron or protrude outward. Without front and side views, the craftsman will interpret the same sequence differently.

After the specification is approved, it is saved together with the finish sample. This helps to order a replacement after several years or to replicate the same supports for another piece of furniture. A photo of the finished dry assembly is also useful but does not replace precise dimensions.

Finished module or custom turned part

A custom turned part is needed when the project requires a non-standard diameter, a different mounting hole, a complex profile, or a perfect match with a historical sample. But for most modern furniture legs, ready-made modules are more convenient: their dimensions are known in advance, identical washers can be ordered in the required quantity, and the 34 mm fit connects different shapes into one system.

When a ready-made element is more advantageous

A finished KN is suitable for repeatable supports, a prototype of custom furniture, and repairing a structure already built on a 34 mm axis. The buyer sees the exact dimension and can calculate the height before ordering. If one part is damaged, it is easier to replace it with the same article number than to send a sample to the turner again.

When individual work is needed

Custom manufacturing is justified if the axle has a different diameter, the furniture must replicate a rare historical shape, or the disc simultaneously performs a complex load-bearing function. The purpose of a finished washer cannot be changed just because its outer size is close to the required one.

Why a random blank often costs more

The flat circle must be precisely centered, drilled, edge-finished, sanded, and repeated several times. If four parts differ even by a millimeter, the legs will look uneven. Saving on the initial blank turns into extra hours of work and the risk of defects.

How to choose discs to match furniture style

Modern minimalism

Use KN-009 as a rare and functional transition. Beech under a solid-color enamel helps maintain clean geometry. KN-010 is acceptable as a single wide base, but it should not be repeated at every level.

Modern Classic

KN-007 connects rounded turned elements well, while KN-010 creates a base and finish. White or complex neutral enamel emphasizes the profile without active wood texture. Symmetry and identical placement of washers are especially important.

Art Deco style is renowned for its love of ornamentation, symmetry, and refined details. The molded decoration NPU-422 can become an excellent complement to geometric motifs and contrasting color combinations characteristic of this style. Try highlighting it with metallic paint or patina — and you’ll get an eye-catching detail that’s hard to look away from.

The contrast of flat KN-010, a cube, and elongated elements creates geometric expressiveness. Thin KN-009 helps separate large shapes. Dark oak tinting or rich enamel can be used, but the number of horizontal accents should be limited.

Natural interior

Oak washers under a clear finish connect with solid furniture, parquet, and wooden panels. On KN-010, the wood grain becomes a noticeable part of the design. In such a project, it is better to select all elements from the same species and a batch with a similar character.

Eclecticism

Different shapes can be combined more boldly, but the system still needs order. A wide disc marks the base, a voluminous one marks the main transition, and a thin one marks a technical pause. If every module tries to be the main one, the stand looks like a set of unrelated parts.

How to maintain repairability

After assembly, save the specification, sequence photos, and coating data. For enamel, record the color and gloss; for tinting, the name of the composition and the order of layers. A small spare disc from the same batch is useful for commercial furniture and complex custom projects.

The structure should be designed so that an individual decorative module can be replaced without destroying the entire support. This depends on the method of fixation, so the craftsman must know about the repair requirement in advance. A completely non-separable unit may look neat but complicates maintenance.

Regular inspection is especially important for stands that are frequently touched. Play, rotation of the washer, or a crack near the hole indicate that the connection requires attention. Timely repair preserves not only the appearance but also the geometry of the entire structure.

What to keep after receiving the order

Do not throw away the markings until assembly is complete. Check the article numbers, sizes, material, and quantity, then photograph each group of parts. For several identical supports, it is convenient to pre-sort KN-007, KN-009, and KN-010 into separate kits. This order protects against a situation where one leg gets an extra washer and another part is missing.

Keep one approved finish sample and a copy of the diagram. They will be useful for reordering, local repairs, or manufacturing second furniture in the same system.

Frequently asked questions

Is the KN wooden washer a fastener?

No. It is a decorative-structural module made of solid wood for installation on an axle with a diameter of 34 mm. The fastening and load-bearing scheme are designed separately.

How does KN-007 differ from KN-009?

KN-007 has a size of 44 × 120 mm and creates a voluminous rounded belt. KN-009 is a compact ring of 22 × 62 mm for fine separation of adjacent elements.

How does KN-010 differ from KN-007?

KN-010 is significantly wider and almost twice as low: 23 × 147 mm vs 44 × 120 mm. It forms a flat wide base, while KN-007 forms a voluminous roller.

What is the hole diameter of 34 mm for?

It ensures compatibility with an axle of the same thickness and other elements of the series. Before purchasing, the actual diameter of the rod must be measured.

Can KN-010 be installed on a 35 mm axle?

Without professional inspection, it is not possible. Attempting to hammer the part or bore the hole by eye can damage the edge and shift the center.

Which disc should I choose for the base of the stand?

KN-010 is suitable for a wide architectural base. KN-007 provides a softer and more compact plinth. The choice depends on the scale of the furniture and the available space.

Which washer fits between the ball and the cube?

KN-009 creates a thin pause, while KN-007 provides a more noticeable rounded transition. For a compact stand, KN-009 is often chosen; for a large one, KN-007 is preferred.

Can KN-007 and KN-009 be combined?

Yes, if the large washer marks the main nodes and the thin one marks secondary transitions. It is better to show the sequence in advance on the drawing.

Can KN-010 be used as a furniture support?

It can be a decorative part of the base, but it does not replace a calculated support structure and attachment to the furniture body.

What to choose — beech or oak?

Beech is convenient for opaque enamel. Oak is chosen for tinting or transparent coating when the natural texture needs to be preserved.

Are the parts supplied painted?

The cards indicate preparation for enamel or tinting. The availability of a ready-made finish coating should be checked in the selected option.

How many KN-009 are needed for one stand?

The quantity depends on the number of transitions. Usually, one washer is placed between adjacent large elements or at the beginning and end of a decorative module.

How to calculate the total height?

Add the heights of all parts along the axis: 22 mm for KN-009, 44 mm for KN-007, and 23 mm for KN-010, then add other modules, straight sections, and fastening zones.

Is it necessary to buy spare washers?

For several identical legs or complex tinting, a small reserve is useful. It allows replacing a damaged part from the same batch.

Can the parts be painted before assembly?

Yes, if the mounting hole and glue zones are protected. In any case, dry fitting is done before final finishing.

How to avoid play on the axis?

Check the actual diameter, hole cleanliness, and fixation method. A large gap should not be considered normal or filled with a random amount of glue.

Are these discs suitable for crafts and decoupage?

They are primarily intended for furniture and interior structures. For ordinary crafts, there are simpler and more suitable blanks.

Where to buy wooden discs for furniture?

In the STAVROS configurator section, you can compare KN-007, KN-009, and KN-010, select the material, finish, and check current ordering conditions.

Conclusion: three identical holes — three different tasks

KN-007, KN-009, and KN-010 share a 34 mm fit, but are not interchangeable washers. KN-009 almost imperceptibly frames the transition. KN-007 creates a voluminous rounded belt. KN-010 forms a wide base or finish. The right choice starts not with price or visual similarity, but with the part's function in the overall stand.

Before ordering, you need to measure the axle, calculate the height of all modules, determine the number of parts for each support, and choose a single wood species. Beech is suitable for enamel, oak for finishes that preserve texture. Dry assembly helps to see proportions before fixing and avoid damaging finished elements.

The STAVROS system allows you to assemble a furniture stand, support, baluster, or decorative partition from repeatable modules without turning each disc individually. The buyer receives precise dimensions and a compatible fit, then focuses on composition, finishing, and reliable installation.