Geometric shape KN-010

In the decorative language of wooden structures, the disc shape occupies a very special place. It is not a volume demanding attention — it is a horizontal plane that "stops" the gaze, fixes the point of the structure, and creates a broad, confident accent without vertical weight. The geometric shape KN-010 — a flat decorative part made of solid wood in the form of a wide disc with a mounting hole D 34 mm — works exactly like this: not as a ball or an elongated figure, but as a horizontal "plate" that sets the scale and width of the decorative node.

The size 23 × 147 × 147 mm is a combination of two extremes: minimal height (23 mm) and significant diameter (147 mm). This proportion creates a part that does not add vertical volume but occupies a noticeable horizontal area. On a post with a diameter of 34–50 mm, a disc with a diameter of 147 mm looks like a wide decorative "plate" — a recognizable architectural motif used in column bases, transitions on balusters, and support nodes of furniture structures from ancient times to the present day.

Geometric shape KN-010 for furniture and interior structures

A flat wooden disc with a mounting hole — an element with very specific and clear logic. Where the structure needs not a volumetric accent but a wide, horizontally-oriented decorative node — that is exactly where the niche of KN-010 lies. In STAVROS constructor system with a unified mounting diameter D 34 mm, KN-010 takes on the role of a "base" or "cap" — a wide horizontal plane that visually "grounds" the structure or marks its beginning and end.

The main task of KN-010: to create a wide horizontal accent plane at the point where the structure connects to the base, transitions from one element to another, or needs a decorative "stop" — noticeable but not bulky. Unlike spherical models, KN-010 does not create a tall vertical volume — it forms a wide horizontal plane that reads differently: stable, solid, architectural.

The part is installed when the actual diameter of the supporting element matches the mounting hole D 34 mm. Before ordering, it is necessary to measure the diameter of the rod, post, or other axis and compare it with this value.

Three main roles of KN-010

Decorative base of a post or leg. KN-010 at the base of a vertical support is a "plinth", a decorative "sole" that visually widens the structure's base. A post resting on a wide wooden disc looks stable and monumental — even if the post itself is thin.

Decorative "cap" or finish. At the top of a vertical element, KN-010 creates a "plate" finish — a wide horizontal accent that marks the final point of the structure. This is a classic motif in architectural decor: a wide abacus slab atop a column capital, a horizontal board atop a wooden post.

Separator between large elements. Between two volumetric elements of the KN series, the KN-010 disc creates a horizontal pause — wide, noticeable, and fundamentally different in shape from the adjacent volumes. This "height — width" contrast makes the structure visually interesting and rhythmically diverse.

Where KN-010 is used: a complete overview

The wide diameter of 147 mm with a small height of 23 mm opens up specific application scenarios for KN-010, characteristic of flat, horizontally-oriented elements.

Base of posts and supports: architectural "plinth"

wooden element for a stand in the form of a disc at the base is one of the strongest decorative techniques when working with vertical supports. A post with a diameter of 34–50 mm, installed on a KN-010 with a diameter of 147 mm, gets a "plinth" — an architectural accent that immediately gives the structure solidity and completeness.

This technique works both at the bottom (support base) and at the top (finial "cap"). Identical KN-010 at the base and at the top of the post create symmetry — clear horizontal accents framing the vertical element on both sides.

Decorative rods: a flat accent on the axis

On the horizontal decorative rod KN-010, it creates a fundamentally different effect than spherical elements. If a ball is primarily seen in vertical projection, the KN-010 disc is perceived as an "extension" of the rod — a round horizontal plane that is clearly visible when viewed from below or from the side. This is especially valuable in structures viewed from below: partitions, suspended decorative systems, cornices.

Wooden divider for furniture rod in the form of a 147 mm disc on a rod with a diameter of 34 mm creates the effect of a "plate on a leg" — one of the most recognizable and classic architectural motifs.

Furniture legs: decorative washer at the base

Wooden furniture leg with KN-010 at the base, it gets a wide decorative "sole". On a table, cabinet, or console 400–700 mm high, a leg with a base disc 147 mm in diameter looks stable and representative. This works especially well in classical and neoclassical styles, where wide flat transitions at the base of a support are a historically established architectural motif.

On low furniture — a coffee table, ottoman, or stand 150–250 mm high — KN-010 can be the main decorative element of the leg: the disc itself is already a full-fledged support with an expressive decorative character.

Stair balusters: horizontal "belt"

on wooden balusters for stairs KN-010 works as a wide horizontal "belt" — a traditional architectural element marking transitions on a vertical rod. In historical furniture and architecture, such horizontal discs on balusters are constantly found — they set the "tiering" of the baluster, visually dividing its height into clear zones.

On a baluster 900–1000 mm high, KN-010 occupies only 23 mm in height, but 147 mm in diameter. This combination creates a pronounced horizontal accent, clearly visible on a stair flight from a distance of 3–5 meters.

Wooden partitions: base and top of the vertical rod

At the base of the vertical rods of the KN-010 interior wooden partitions, there is a decorative "plate" base for each post. The partition rod, "growing" from a wide wooden disc, looks architecturally convincing and professional. This is especially valuable in representative interiors, where the partition is a prominent architectural element, not just a functional divider.

At the top of the KN-010 rod, it creates a symmetrical finish — and the entire partition acquires a clear vertical structure: a wide base, the rod body, and a wide finish.

Designer furniture: the disc as a decorative center

In designer pieces — beds, consoles, cabinets, chests of drawers — KN-010 opens up possibilities for creating unconventional decorative solutions. The disc with a diameter of 147 mm is itself large enough to become an independent decorative center of a small support structure. On a bed with turned headboard posts, KN-010 at the base of each post gives the entire structure a solemn, "column-like" character. On a console table with thin metal supports, the wooden disc at the base creates a warm organic accent, "grounding" the lightweight structure.

Dimensions 23 × 147 × 147 mm and a 34 mm hole: the geometry of the disc

The parameters of KN-010 describe a part with the most "horizontal" proportion in the entire KN series — a unique format, without analogs in the lineup.

Parameter breakdown

A = 23 mm — height along the axis. 23 mm is the minimum height in the KN series, on par with KN-009 (22 mm). But while KN-009 has a diameter of 62 mm and is a "small ring," KN-010 with a diameter of 147 mm is already a full-fledged large disc. At a height of 23 mm, the horizontal plane visually dominates the disc, rather than the vertical profile.

B = C = 147 mm — transverse dimensions. The diameter of 147 mm is the second largest in the series after KN-004 (170 mm). This is a significant size: a disc of this diameter is comparable to a large saucer. On an axis with a diameter of 34 mm, the disc "wall" is (147 − 34) / 2 = 56.5 mm — this is a full-fledged wide annular plane, clearly visible from any angle.

D = 34 mm — mounting diameter, the unified standard of the KN series. All elements of the furniture constructor Series are compatible on the same axis.

Proportion A/B: 23/147 = 0.16 — the "flattest" element of the series

KN-010 is the undisputed "record holder" of flatness in the series. Its proportion of 0.16 means the diameter is six times greater than the height. This is not a coincidence — it is a deliberate form with a specific functional logic: to create maximum horizontal width with minimal vertical height.

Ring surface area: why 147 mm are visible

Area of the top plane of KN-010 without the hole: π × (73.5² − 17²) = π × (5402 − 289) ≈ π × 5113 ≈ 16,060 mm². This is about 160 square centimeters of visible wooden surface — an area quite comparable to the surface of a spherical element with a diameter of 100+ mm. That is why KN-010, with a height of only 23 mm, is a noticeable, "weighty" decorative accent: its wide horizontal surface is perceived as a significant decorative element, not as a thin spacer.

Flat shape as a decorative base and separator: the special role of KN-010

The flat round disc in decorative systems is one of the oldest architectural motifs. The abacus (top slab of a column capital), torus (half-round at the base of a column), astragal (band between support elements) — all of them are horizontal discs or rings that separate vertical elements and "gather" the structure into a single whole. KN-010 translates this age-old principle to the scale of furniture and interior decor.

Horizontal plane as a visual "stop"

A gaze sliding along a vertical element "stops" at the horizontal plane — this works as reliably as a horizontal line in page layout. Decorative wooden washer with a diameter of 147 mm on a vertical post creates exactly such a "stop" — a point where the gaze fixes, notes the transition, and moves on. This forms the rhythm of perception of the vertical element: not monotonous, but segmented, structured.

Wide diameter as a visual base

On a thin post with a diameter of 34–50 mm, the KN-010 disc with a diameter of 147 mm creates a "flange" — a wide decorative base that fundamentally changes the perception of the post. Without the disc, the post looks like a thin axis going downward. With the disc at the base, it looks like an architectural support with a clear, decoratively designed base. This is one of the most effective investments in the visual quality of the structure: one element 23 mm high fundamentally changes the perception of the entire post.

Closing joints: a flat disc is more effective than a ring

Where the KN-009 (ring with a diameter of 62 mm) covers a small joint, the KN-010 (disc with a diameter of 147 mm) covers a large transition: for example, the connection point of a wooden post with a metal flange on the floor or with a horizontal wooden rail. On the 147 mm disc, any technical inconsistencies in the joint area are hidden, and the transition looks like an intentional decorative node, rather than a place where two parts connect.

Beech and oak: material on a wide flat surface

The wide flat surface of the KN-010 is a large display area for the material. On a disc with a diameter of 147 mm, the wood texture is visible as clearly as on a board cut. The choice of wood species here is of fundamental importance.

Solid beech part: a clean monochrome plane

Beech under enamel on a 147 mm disc is a large, smooth monochrome plane: pure color, no textural "interruptions," an ideal surface for a finishing coating. Solid beech part KN-010 is a choice for projects where the disc shape should be read as a geometrically clean object: Scandinavian style, minimalism, modern neoclassicism with a monochrome palette.

On a white disc at the base of a white post, all emphasis is on form and proportion — the material does not distract, but enhances the geometric effect. This is the most concise and modern solution.

Oak array detail: annual rings on a flat cut

On the flat surface of an oak disc for tinting, the wood pattern creates an effect reminiscent of a cross-section of a trunk: concentric annual rings, radial rays, characteristic "mirrors". At a diameter of 147 mm, this pattern is visible in full force — rich, natural, organic. Oak part for tinting — a choice for projects where the natural texture of wood is the main decorative tool.

The oak disc KN-010 at the base of an oak post for tinting is a "living" base with a unique natural pattern on each specimen. Especially organic in eco-style, rustic, classic and eclectic interiors — everywhere where the natural expressiveness of solid wood is valued.

"Prestige" sanding quality: clean flat surface and neat edge

On a wide flat surface with a diameter of 147 mm, sanding defects are as clearly visible as on the surface of a wooden tabletop: "waves", traces of sanding tools, grain size differences — all this is visible under side lighting.

Flatness of the top and bottom faces

The top and bottom planes of KN-010 are the main decorative surfaces that are visually perceived. The "Prestige" quality guarantees their flatness: sequential sanding with decreasing grit, without "pits" and "bumps". On a surface with a diameter of 147 mm, this is fundamentally important — any deviation from flatness creates an undesirable "wave" reflex under lighting.

Neat edge of the outer diameter

The outer edge of the disc is a thin boundary perceived when viewed from the side. Decorative wooden disc With a neatly finished edge, it looks professional and "clean." The "Prestige" quality ensures a smooth, even outer edge profile without chips, burrs, or irregularities.

Cleanliness of the mounting hole

On a disc 23 mm thick with a hole D 34 mm, this is a cylindrical surface only 23 mm high. Any roughness or chip on the edges of the hole will be noticeable during installation and when viewed from below. The "Prestige" quality guarantees clean, neat edges of the hole on both sides of the part.

KN-010 in the STAVROS construction system: combinations and schemes

Scheme "disc — sphere — disc"

Two KN-010 discs with a large KN-004 or KN-002 sphere between them is one of the strongest architectural motifs in wooden structures. The lower disc is the base, the sphere is the body, the upper disc is the completion. This directly reproduces the structure of a classical architectural support: plinth — body — abacus. On a furniture leg, decorative post, or baluster, this scheme creates a complete, architecturally perfect image.

Scheme "disc as a final point"

KN-010 as the last element on a horizontal rod — a wide flat "completion" of the axis. On a decorative horizontal rod in a partition or cornice, the KN-010 disc at the end looks like a deliberate decorative "point" — a confident, wide completion of the line.

Scheme "discs and rings in alternation"

KN-010 (147 mm disc) and KN-009 (62 mm ring) alternating on one axis — a "wide — narrow — wide — narrow" rhythm. The contrast in diameters (147 vs 62) creates an expressive pulsating rhythm, where wide discs act as strong accents and narrow rings as delicate separators between them.

Combination with other catalog sections

С with matching legs: KN-010 as a decorative "sole" of a composite leg, visually widening its base and giving the furniture a monumental, solid character.

С balusters for staircases: KN-010 as a horizontal "belt" on a baluster — a wide, clearly visible accent that sets the rhythm in alternation with vertical sections.

С carved wooden decor: a wooden disc and carved ornament from the same species — two different decorative languages (geometry and ornament) united by a single material.

С decorative elements made of solid wood overall: the wide disc organically fits into any wooden decor system as a "horizontal anchor" — an element that gives the structure a sense of stability and solidity.

Who is KN-010 suitable for: audience and tasks

Furniture workshops and joinery productions. A ready-made wooden disc with precise dimensions and a good surface eliminates the need for self-manufacturing flat round elements on lathe or milling equipment. Turning a 147 mm diameter disc with a precise hole is an operation requiring calibrated equipment and flatness control. The finished part removes this issue.

Interior designers. KN-010 is a rare element available openly: a wide wooden disc with a mounting hole as a standard catalog item. A part with predictable dimensions is included in the project specification and arrives without approvals.

Staircase manufacturers. On a staircase with wooden balusters KN-010 at the base of each baluster creates a decorative "belt" — wide, clearly visible on the staircase flight, giving the entire structure a monumental architectural character.

Masters of wooden partitions. On partitions with vertical rods KN-010, a decorative "plate" base is created at the base of each rod — an expensive, representative look without additional production costs.

Restorers. Wide horizontal discs at the bases of supports are a historically established motif in classical furniture and architectural decor. KN-010 can serve as a basis for recreating lost horizontal belts and bases in restoration projects.

Private customers. STAVROS accepts orders from one piece — the full catalog of decorative elements made of solid is available for private individuals.

Frequently Asked Questions (FAQ)

What is the geometric shape KN-010 used for?

KN-010 is used as a decorative wooden part in the shape of a wide flat disc for furniture and interior structures: bases of posts and legs, a separator between volumetric elements, a decorative "washer" on a rod, a horizontal "belt" on a baluster, the finish of a vertical element. The diameter of 147 mm with a height of 23 mm creates a wide, noticeable horizontal accent.

Can KN-010 be used as a wooden washer?

Yes. In shape and proportions, KN-010 is exactly a decorative wooden washer, a flat disc with a hole D 34 mm. The part is threaded onto an axle or rod of the corresponding diameter and fixed with glue in the desired position. Before ordering, it is necessary to check the diameter of the supporting element against the mounting hole of 34 mm.

How does KN-010 differ from KN-009?

KN-010 is significantly wider: diameter 147 mm versus 62 mm for KN-009. KN-009 is a compact decorative ring for small transitions and rhythmic accentuation. KN-010 is a wide decorative disc for large bases, horizontal "belts" and noticeable accents. Both elements are compatible on the same axis due to a single mounting diameter of 34 mm — they can be alternated.

Is KN-010 suitable for the base of a furniture leg?

Yes, this is one of the main use cases. A wooden leg with a KN-010 disc at the base gets a wide decorative "sole," visually expanding the base and giving the furniture a solid, monumental character. Compatibility — with a leg axle diameter of 34 mm.

What to choose — beech or oak for KN-010?

Beech — for enamel, when the wide flat surface of the disc should be monochrome and geometrically clean, without textural accents. Oak — for tinting, when it is important to show the natural wood grain on the large flat surface of the disc — annual rings and medullary rays on the cut, especially expressive on a diameter of 147 mm.

Can KN-010 be combined with spherical elements of the series?

Yes. The scheme "KN-010 at the bottom — KN-004 in the center — KN-010 at the top" on one axis reproduces the classic architectural structure "plinth — body — abacus" and creates a monumental, complete decorative image. All elements of the KN series are compatible on a single D 34 mm axis. The full lineup is in "Constructor" section.

Where to find related categories?

Related sections: Furniture Legs and Supports, wooden balusters for staircases, Carved wooden decoration и Solid wood decorative elements.