We order 8 MLD-026 strips, and an extra 390 ₽ appears on the invoice: how to buy a 16×16 mm wooden molding and correctly calculate a small order

For a furniture project, the quantity has already been calculated: eight two-meter MLD-026 planks are needed. The buyer opens the product page, sees 920 ₽ for beech or 1,130 ₽ for oak, and expects the total product amount to equal the price of one plank multiplied by eight. But the page has a separate condition for small orders: when ordering up to 10 pieces, a pine backing board costing 390 ₽ is added to the order.

This backing board is not a ninth molding or an additional decorative element. It is needed as a rigid packaging base for safe transportation of long linear products. Therefore, the actual amount of a small order is calculated not as 8 × price, but as 8 × price of MLD-026 + 390 ₽, after which delivery and further work are accounted for separately.

As of September 8, 2026, MLD-026 has one standard geometry of 16 × 16 × 2000 mm, produced from beech and oak; the card shows the "Prestige" sanding quality and the "For enamel" finish. In Saint Petersburg, at the time of verification, 71 beech and 211 oak strips were displayed. Prices and availability on the website are updated, so they need to be re-checked before payment.

Go to Catalog

Wooden molding MLD-026 16×16×2000 mm: what is included in the product item

MLD-026 is a compact wooden profile with a square cross-section of 16 × 16 mm and a length of 2000 mm. For a buyer, it is important to distinguish the characteristics of the strip itself from the packaging line.

Parameter	MLD-026
Article number	MLD-026
Size A × C × L	16 × 16 × 2000 mm
Material	Beech / Oak
Sanding	«Prestige»
Regluing quality	"Under enamel"
Beech	920 ₽/pc.
Oak	1,130 ₽/pc.
Production when out of stock	5–10 days
Small order	pine backing 390 ₽ when ordering up to 10 pcs.

The price of 920 or 1,130 ₽ refers to one MLD-026 slat. The pine backing appears as a separate line in the invoice under the condition stated on the card and does not increase the quantity of decorative profile.

If the specification is already approved, buy wooden molding MLD-026 it should be checked not only for quantity, but also for the final invoice amount.

Why does a ninth line for 390 ₽ appear when there are eight moldings

The buyer sees eight units of MLD-026 and naturally expects eight lines or one line with quantity 8. The pine backing looks like an extra item if the card description is not read.

The function of the backing is different: it creates a rigid frame for transporting two-meter linear molding. A long thin profile is easier to damage by bending or impact than a short furniture part, so the packaging must preserve the shape of the batch.

It is important to distinguish three concepts:

MLD-026 is a decorative product;

pine substrate — packaging element;

delivery — a separate logistics service, the cost of which depends on the route and transportation conditions.

390 ₽ does not need to be distributed along the length as if it were "another meter of molding." For an internal estimate, you can calculate the packaging load per plank, but only as accounting analytics. With eight planks, this is:

390 ÷ 8 = 48.75 ₽ per plank.

Such a calculation helps compare small batches but does not change the order structure: the substrate remains one separate line item.

Our factory also produces:

View Full Product Catalog

Eight MLD-026 planks made of beech: the exact total for a small order

The price at the time of verification is 920 ₽ per beech plank.

For eight:

8 × 920 = 7 360 ₽.

Adding the packaging substrate:

7 360 + 390 = 7 750 ₽.

Therefore, the product portion of a small order of eight beech MLD-026 planks is 7,750 ₽ before delivery, finishing, cutting, and installation.

It is useful to look at the structure of the total:

Line	Calculation	Total
MLD-026, beech	8 × 920 ₽	7 360 ₽
Pine underlayment	1 × 390 ₽	390 ₽
Total before delivery		7 750 ₽

Packaging increases this product total by about 5.3% relative to the price of the eight slats themselves. For a small budget, this is noticeable, so it's better to see the line before payment rather than discover it after the invoice is issued.

Eight oak MLD-026: the same order in a different wood species

For oak, the current price is 1,130 ₽ per slat.

Eight slats:

8 × 1 130 = 9 040 ₽.

With backing:

9 040 + 390 = 9 430 ₽.

Line	Calculation	Total
MLD-026, oak	8 × 1 130 ₽	9 040 ₽
Pine underlayment	1 × 390 ₽	390 ₽
Total before delivery		9 430 ₽

Difference between the two eight-piece orders:

9 430 − 7 750 = 1 680 ₽.

These 1,680 ₽ come solely from the material difference: the packaging line is identical in both calculations.

Therefore, beech and oak should be compared not by the total amount 'with packaging,' but separately by the price of the slats themselves. In this scenario, the underlay does not make one wood species more advantageous than the other.

Can I order 10 or 11 slats just to make the 390 ₽ disappear?

This is one of the most practical questions. The card's wording refers to orders up to 10 pcs., meaning a small batch should be calculated including the packaging line. A buyer might get the idea to increase the quantity to 11 and thus exceed the stated threshold.

But first, let's compare the money.

Beech

8 slats + backing:

7 750 ₽.

10 slats + backing:

10 × 920 + 390 = 9 590 ₽.

11 slats without the backing calculation at the threshold:

11 × 920 = 10 120 ₽.

Even if the separate 390 ₽ line no longer applies with 11 slats, eleven beech MLD-026 slats cost 2,370 ₽ more than eight with backing.

Oak

8 slats + backing:

9 430 ₽.

11 slats:

11 × 1 130 = 12 430 ₽.

The difference is 3,000 ₽.

Therefore, buying three extra slats just to make the packaging line disappear is economically illogical if those slats are not needed for the project.

It is another matter if the cutting map shows a real need for spare stock. Then additional MLD-026 pieces are purchased because they are needed for the project, and the change in packaging condition becomes a secondary consequence.

Packaging backing and molding spare stock are two different items

Pine backing is not repair spare stock.

The spare MLD-026 strip is a full two-meter profile that can be used:

• in case of cutting errors;
• in case of end damage;
• to replace a part during installation;
• for future furniture repairs;
• if the project list changes.

The backing after transportation does not replace MLD-026 in terms of profile, material, or purpose.

In the estimate, it's better to separate these line items:

Type	What for
MLD-026 per calculation	main project details
MLD-026 reserve	technological or repair allowance
Pine underlayment	packaging and rigidity during transport

This way, the buyer won't have to explain later why the invoice has 'nine line items' while the project has only eight moldings.

Molding 16×16 mm: first the parts map, then the number of strips

The most dangerous mistake is deciding in advance that the project needs eight strips just because the total length is close to 16 m.

MLD-026 has a length of 2000 mm. From one strip, you need to obtain specific parts, not abstract linear meters.

A map is compiled for the furniture:

Detail	Length, mm	Quantity	Total length
Vertical A	___	___	___
Vertical B	___	___	___
Horizontal A	___	___	___
Horizontal B	___	___	___

Then these parts are laid out along two-meter strips.

Only after cutting does a justified quantity of 8, 9, or 10 slats appear. If the calculation gives eight and the leftovers are usable, the 390 ₽ packaging is not a reason to increase the purchase.

If the project is not yet tied to a single article, buy furniture molding you can use the general category of linear products and compare the sizes of other profiles.

Why the total length may say "8 slats" while cutting says "9"

Let's imagine a hypothetical project that requires 15 m of profile.

simple arithmetic:

15 000 ÷ 2 000 = 7,5.

Rounding up, we get 8 planks.

But eight rods give 16,000 mm of total length, and this may not be enough for cutting if the parts are inconvenient to combine.

For example, suppose we need 12 parts of 1,100 mm each and 4 parts of 450 mm each.

Total length:

12 × 1,100 + 4 × 450 = 15,000 mm.

By length, that's exactly the same 8 planks.

But from one 2,000 mm rod, you cannot get two 1,100 mm parts: you need 2,200 mm. Therefore, each of the twelve long parts will actually require a separate rod, unless there is another acceptable cutting scheme.

This is a deliberately extreme educational example. It illustrates the principle: total length is not a cutting map.

For MLD-026, the decision must be made based on the actual part dimensions, cutting width, and technological allowances of the specific workshop.

How to calculate the allowance if the project truly requires a reserve

The reserve cannot be chosen from a universal percentage like "always take +10%". For trim, it is more useful to calculate risk for specific operations.

If eight slats yield a large number of short elements, the remnants can themselves create a reserve. If each slat is cut almost to size and the remnant is unusable, a spare two-meter whip may be more reasonable.

It is useful to ask three questions:

1. Is there a critical part that cannot be re-obtained from remnants?
2. How expensive is a repeated separate order and its delivery?
3. Will the spare slat be suitable for future repairs of this particular furniture?

If the answer is "yes" to at least the first two, an additional MLD-026 is purchased as a conscious reserve, not as a way to change the packaging threshold.

Wooden trim in a small batch: what costs to consider besides the price of the slat

When you need Buy wooden trim for a small furniture project, the estimate should be broader than the card price.

Minimum line items:

1. the MLD-026 slats themselves;
2. applicable packaging substrate;
3. delivery;
4. cutting in the workshop;
5. joint preparation;
6. installation;
7. primer and enamel;
8. finisher's work;
9. possible reserve.

Not all of these services must be provided by the seller. This is the full project estimate, not a list of mandatory STAVROS services.

That is why 7,750 or 9,430 ₽ cannot be called the cost of finished furniture. This is the product part of the selected scenario before delivery and processing.

Beech or oak for MLD-026: deciding on the material separately from packaging

The card offers both wood species.

Beech in the current execution pairs well with the opaque enamel scenario: the card shows "Under enamel." Oak is more expensive, but the material can be chosen based on the project's requirements.

There's no need to turn the article into a general "beech vs. oak" debate. For a small order, it's enough to note:

• which wood species the project requires;
• whether opaque finishing will be applied;
• whether the material matches other wooden furniture finishes;
• whether the budget difference is acceptable.

With eight slats, the difference in the moldings themselves is 1,680 ₽. The packaging backing does not affect this choice.

"Prestige" for MLD-026: there is no separate "Standard" option in the current card.

At the time of verification, the MLD-026 trade table shows the sanding quality as "Prestige."

Therefore, the buyer should not add to the request on their own:

"MLD-026 / Standard / cheaper."

The current card does not offer this option.

The manufacturer describes "Prestige" as detailed hand sanding, where the product does not require additional surface finishing. Upon receipt, a regular condition check is still needed before finishing.

For the estimate, the key point: the price of 920 and 1,130 RUB applies specifically to the shown "Prestige" version.

Only 2–3 slats are needed: when it is more useful to order a sample first

If MLD-026 is not yet finally approved, buying two or three two-meter slats just for a visual trial may be excessive.

STAVROS has separate Samples of linear products 100 mm long and professional Molding samples set OMLD-005.

The sample helps to check:

• real 16 × 16 mm at the facade scale;
• profile shape;
• the material;
• combination with adjacent decor;
• Future finishing.

But the sample does not replace the cutting calculation. After approving the profile, you still need to calculate the number of two-meter MLD-026 pieces.

For one specific project, a point sample is usually enough; a professional set is more logical for a designer or workshop that regularly compares different profiles.

What to write in the request for MLD-026

Instead of “I want eight such moldings,” it is better to provide one technically complete line:

MLD-026 / 16 × 16 × 2000 mm / beech or oak / Prestige / For enamel / 8 pcs.

In the next line:

Consider the applicable packaging condition according to the current product card.

If you have a cutting plan, you do not have to send it to the seller, but it is useful to keep it together with the purchase list. It explains why the quantity is exactly eight.

For the internal estimate, you can separately note:

Packaging substrate — 390 ₽ if the card condition applies.

What to check in the cart before payment

Before paying for a small order, you need to pass a short verification:

• SKU MLD-026;
• size 16 × 16 × 2000 mm;
• material — beech or oak;
• "Prestige" quality;
• quantity — 8 pcs. or other per cutting map;
• price per one slat;
• presence of packaging line 390 ₽;
• the delivery cost;
• match of the final amount with your own estimate.

For eight beech slats, the control amount before delivery is 7,750 ₽.

For eight oak ones — 9,430 ₽.

If the invoice differs, there is no need to automatically consider it erroneous: first, check the current price, quantity, material, and logistics lines.

How 390 ₽ are distributed across a small batch

The same packaging line feels different in an order of two versus ten slats. For an internal budget, you can calculate how many rubles of packaging conditionally fall on one MLD-026.

Number of planks	Underlay	Conditionally per one slat
2	390 ₽	195 ₽
5	390 ₽	78 ₽
8	390 ₽	48,75 ₽
10	390 ₽	39 ₽

This does not change the price of the product itself. Such a table is only needed to understand the structure of a small purchase.

For two beech MLD-026, the backing adds a noticeable share to the price of the slats themselves:

2 × 920 = 1 840 ₽;

1 840 + 390 = 2 230 ₽.

For ten:

10 × 920 = 9 200 ₽;

9 200 + 390 = 9 590 ₽.

Therefore, the packaging issue is especially sensitive in very small orders. But the correct conclusion is not "you need to buy more," but "you need to see all invoice lines in advance."

If the profile is needed for one small repair, additional slats may cost more than the packaging itself. If there is a second furniture unit with the same MLD-026 ahead, combining the real need into one purchase can already be considered a normal way of organizing the order.

Can two projects be combined into one MLD-026 purchase

Suppose today we need eight slats for one cabinet, and in a week another four — for another item from the same series. In this case, combining batches makes sense, because all twelve MLD-026 will indeed be needed.

But orders should only be combined after checking three things:

• the material is the same — beech or oak;
• the finish and specification quality match;
• the second project is already approved, not just a possible idea.

If these conditions are met, a single combined purchase can simplify receiving, maintain a single batch of material, and reduce the number of individual logistics operations. However, specific savings on packaging or delivery cannot be promised in advance: the actual invoice depends on the seller's current rules and the route.

In other words, combining real needs is reasonable; buying unnecessary slats just to reach a threshold is not.

What does having 71 beech and 211 oak slats mean for an order of eight

At the time of checking, the card shows 71 MLD-026 in beech and 211 in oak in Saint Petersburg. For an order of eight, this means the displayed quantity is currently sufficient for both wood types.

But availability is a dynamic value. It should not become part of a permanent project specification. The bill of materials stores the article number, size, material, and quantity, while the warehouse stock is checked immediately before placing the order.

The card also states that items in stock are shipped after preparation within three working days, and if unavailable, the average production time for custom orders is 5–10 days. Therefore, for the furniture schedule, it is useful to divide:

project requirement — 8 pcs.;

availability at the time of order — to check;

delivery time — to confirm in the invoice.

If the project depends on a specific furniture assembly date, even a large displayed availability does not replace confirmation of the order by a manager.

How to accept a two-meter MLD-026 after delivery

The packaging base is needed for transportation, but after receipt, the batch must still undergo standard incoming inspection.

Before cutting, lay out the strips and check:

• article number and material;
• quantity;
• length 2000 mm;
• absence of obvious transport damage;
• condition of corners and edges;
• surface conformity to the ordered "Prestige";
• Suitability of each plank for the planned cutting.

If one whip is damaged, this must be detected before the other seven are already cut according to the map. Then the workshop can still recalculate the cutting or resolve the issue regarding the damaged position.

The pine backing should not be counted as part of the quantity of MLD-026 upon receipt. In the invoice and internal accounting, eight moldings must remain eight moldings.

The price of a small order and the cost of one usable meter are not the same thing

The total nominal length of the eight planks is:

8 × 2,000 = 16,000 mm = 16 m.

For beech, the merchandise total with backing of 7,750 ₽ gives conditional:

7,750 ÷ 16 = 484.38 ₽ per nominal meter of purchase.

For oak:

9,430 ÷ 16 = 589.38 ₽ per nominal meter.

But this is not the price of one meter of a finished part. After cutting, part of the length may go into scraps, technological allowances, and remnants that cannot be used in this project.

Therefore, in production costing it is more useful to calculate two values:

purchase meter — the entire paid length;

useful meter — the length of parts that actually went into the furniture.

The worse the cutting, the more expensive each useful meter. This difference is usually more important than the 390 ₽ packaging and once again shows why the parts map should appear before the cart.

When MLD-026 is not worth buying yet

It is better to postpone the purchase if eight slats were obtained only by dividing the total length by two meters, but the cutting map has not been made.

There is no need to place an order if the material has not yet been approved and beech and oak are considered interchangeable only because of a similar profile.

A stop signal is an attempt to abandon "Prestige" for the sake of price, although the card does not show any other quality for MLD-026.

If the budget is very sensitive to 390 ₽, it is better not to look for a way to artificially jump over the quantity threshold, but to double-check whether the project really needs exactly this volume and whether the purchase can be combined with another real need for the same profile.

Finally, if the 16 × 16 mm profile has not yet been tried on the furniture, it is wiser to first order a sample or make a full-size mockup.

Where to buy MLD-026 and other furniture moldings

If MLD-026 is already confirmed by the parts card, the specific product card is the endpoint of the order.

If the profile is still being selected, Buy molding for furniture can be from the general category of linear products. There, MLD-026 is compared with other sizes and shapes.

Practical conclusion for a small batch is simple:

8 MLD-026 ≠ just 8 × the price of one strip.

For beech:

8 × 920 + 390 = 7 750 ₽.

For oak:

8 × 1 130 + 390 = 9 430 ₽.

The pine backing is packaging, not an additional molding. Increasing the quantity just to make the 390 ₽ line disappear makes no sense if extra strips are not needed for the project.

Questions before ordering MLD-026

What is the size of MLD-026?

16 × 16 × 2000 mm.

How much does one beech strip cost?

As of the check on September 8, 2026 — 920 ₽.

How much does the oak one cost?

1,130 ₽ as of the check.

Why is 390 ₽ added to eight planks?

The card states that when ordering up to 10 pcs., a pine backing is added to the order, creating a rigid frame for transporting long molding.

Is the backing a ninth molding?

No. It is a packaging element.

How much do eight beech MLD-026 with backing cost?

7,750 ₽ before delivery and subsequent processing.

How much do eight oak ones cost?

9,430 ₽ before delivery and finishing.

Does it make sense to take 11 pieces instead of eight just for the packaging?

No, if the project doesn't need the extra strips. The cost of three extra MLD-026 significantly exceeds 390 ₽.

Why can't the quantity be counted only by total length?

Because individual parts may not fit well into two-meter rods. A cutting map is needed.

Is it always necessary to take one spare strip?

There is no universal rule. The reserve depends on cutting, part criticality, possible errors, and the cost of reordering.

Is MLD-026 available in the "Standard"?

The current trade table shows "Prestige".

What does "under enamel" mean?

This is the quality of blank lamination for opaque finishing, not the final paint.

Is MLD-026 in stock?

At the time of the check, the product page showed 71 beech and 211 oak strips in Saint Petersburg. Availability changes and requires verification before payment.

How long does production take if the required quantity is not available?

The product page indicates an average production time for custom orders of 5–10 days.

What should be checked last before payment?

Material, quantity, current price, packaging line, delivery, and matching the quantity to the cutting plan.