The card says "dresser frame", but the height of STL-026-13 is only 160 mm: what will need to be added to get finished furniture

A person is looking for a base for a custom dresser, opens STL-026-13 and sees a quite marketable offer: a dresser frame, beech or oak, size 780 × 500 × 160 mm, "Prestige" sanding, and the option to place an order. The name sounds as if after delivery all that remains is to assemble the product — and the dresser is ready. But the figure 160 mm instantly raises a legitimate question: where is the rest of the height of the future furniture?

This is exactly where you cannot assume what the product card does not state. STL-026-13 is indeed a wooden frame used as a base for creating a dresser. Delivery in disassembled form and a set of fittings are confirmed. But it does not follow that the box will automatically contain the body, finished drawers, fronts, guides, handles, internal contents, and all other parts of a completed piece of furniture. Their presence needs to be checked separately. The card does not confirm them as part of the delivery — and this is not the same as categorically saying "they are not there."

Therefore, a buyer who is going to Buy dresser frame STL-026-13, needs not only an answer to the question about the type of wood. Before payment, it is necessary to divide the future dresser into two parts: what exactly is purchased as STL-026-13 and what the furniture maker must manufacture, select, or confirm separately.

The size 780 × 500 × 160 mm in this task serves as a signal. It refers to the STL-026-13 frame itself and cannot automatically be taken as the final dimensions of the finished dresser after adding the body, facades, drawers, and other parts. The height of the finished piece cannot be derived from a single figure of 160 mm without a project.

That is why a good order starts not with the words "add the frame to the cart," but with a list of the future furniture.

STL-026-13 Dresser Frame

from 226.05 $

Go to Catalog

Wooden frame of the STL-026-13 dresser: which characteristics can already be recorded without guesswork

Before discussing the body and facades, let us separate confirmed data from assumptions.

For STL-026-13, the following are confirmed:

• the name "Dresser frame STL-026-13";

• size 780 × 500 × 160 mm;

• materials: beech and oak;

• sanding quality "Prestige";

• preparation for enamel in the selected configuration;

• delivery in disassembled form;

• set of fittings;

• Checkout via cart and one-click purchase.

This is already enough to draft the first part of the specification.

The last rows of the table are especially important. "Not confirmed" cannot be translated as "definitely absent." Until the exact configuration is received, the buyer should maintain a neutral wording.

Watch video ...

The product name does not replace the configuration list

The word "frame" describes the purpose of the product, but does not provide an itemized packing list.

The same happens in other professional fields. "Chair frame" does not mean fabric, filling, and a finished seat. "Table frame" does not necessarily equal a fully assembled table with a tabletop. Therefore, a dresser frame should also be perceived as an independent structural part of a furniture project, not as a promise of the entire piece of furniture in one box.

If the task is broader than one item, you can look at which furniture frames to buy for different furniture items, and compare the very principle of such blanks.

Our factory also produces:

STL-026-4 Console Frame

from 429.53 $

Bench Frame STL-026-6

from 313.03 $

Stool Frame STL-026-7

from 277.77 $

Banquette Frame STL-026-9

from 288.02 $

Banquette Frame STL-026-10

from 239.71 $

Banquette Frame STL-026-11

from 223.12 $

Nightstand Frame STL-026-12

from 186.52 $

Carved Bed Frame KRVT-001

from 5,046.85 $

View Full Product Catalog

Dresser frame 160 mm high: where STL-026-13 ends and future furniture begins

The size of 160 mm can easily be misread.

The buyer reasons: "A dresser is usually noticeably taller. So either there's an error in the product card, or they're only selling me the legs."

Neither can be written without confirmation.

The product card publishes the size of the STL-026-13 itself. Therefore, 160 mm refers to the dimension of the purchased frame in the specified size row. How exactly it is positioned relative to the future cabinet, which surfaces rest on it, and what final height the finished furniture will have — that's already a design question.

160 mm cannot be declared as the height of the plinth.

That's a tempting guess.

But the product card does not confirm such a purpose.

One cannot automatically call 160 mm the height of the legs.

For the same reason.

One cannot add an arbitrary cabinet height to 160 mm.

For example:

"Let's take a 600 mm frame, so the dresser will be 760 mm."

Such a calculation has no relation to the confirmed data of STL-026-13 until the frame is designed.

Correct wording

160 mm is the published size of the STL-026-13 frame itself. The final height of the finished dresser is determined only after the development of the remaining furniture parts.

This is a simple phrase, but it completely changes the approach to ordering.

Why the 780 × 500 mm size also cannot be automatically transferred to the finished frame

A similar error occurs with width and depth.

The buyer sees 780 × 500 and decides:

"So, the finished dresser will be exactly 780 mm wide and 500 mm deep."

Not necessarily.

The frame indeed has a published size of 780 × 500 × 160 mm, but the final dimensions of the frame depend on the method of joining with the wooden base.

The body can:

• coincide with the frame along the outer contour;

• have a different overhang;

• be located within a certain zone;

• receive a worktop or top cover of a different size;

• have protruding fronts.

Which scheme is specifically provided for STL-026-13 needs to be determined from the current drawing.

For a furniture maker, the product size is a starting point, not the finished body geometry.

It is better to include in the technical specification:

STL-026-13 — 780 × 500 × 160 mm. The connection of the future body with the frame should be done according to the current technical drawing and confirmed support points.

This entry protects against errors much better than the phrase:

Chest of drawers 780 × 500 mm.

Solid wood furniture frame: three things the card actually promises as part of the purchase

For discussing the configuration, it is useful to start not with a long list of what might be missing, but with what is confirmed.

The wooden frame itself

This is the main product.

The buyer orders a specific STL-026-13, not an abstract set of parts for self-manufacturing the base.

Disassembled delivery

The frame arrives not as a fully finished assembled piece of furniture.

Therefore, assembly needs to be included in the project organization.

Furniture fittings kit

The card directly states that it is a furniture fittings kit.

But there is a fundamental boundary here: the detailed composition of the kit cannot be derived from the phrase "furniture fittings kit."

It cannot be automatically asserted that it includes:

• drawer slides;

• hinges;

• handles;

• cabinet fasteners;

• connectors for all future parts;

• decorative caps;

• supports.

Each such element requires separate confirmation.

What exactly to request for the STL-026-13 hardware kit

The best question to ask a manager is not:

"Do you have the hardware?"

The answer to it is already known — the kit is listed.

You should ask:

"Please send the full list of hardware included in the STL-026-13 kit, with the quantity of each item and the purpose of the components."

It is this kind of request that turns a vague product card into a working specification.

Why know the quantity

A furniture maker needs to understand whether everything has been received.

Why know the purpose

Even familiar fasteners may be used in a specific assembly differently than the craftsman expects.

Why a list is needed before payment

If part of the future furniture requires different hardware, it can be included in the budget in advance.

Wooden dresser base: which elements cannot be considered automatically included

Now let's move on to the second half of the future piece of furniture.

Until the card provides direct confirmation, the following cannot be automatically considered part of STL-026-13:

• cabinet side panels;

• cabinet bottom;

• back wall;

• top cover;

• internal partitions;

• drawers;

• facades;

• guides;

• hinges, if the project at all provides for doors;

• handles;

• internal filling;

• individual legs or support feet;

• body fasteners;

• paint and varnish materials.

The wording here is fundamental: one cannot consider them automatically included.

This is not a list of what is "definitely not there."

This is a list of items that must receive one of three statuses:

1. included in the STL-026-13 set;

2. purchased separately;

3. manufactured by the furniture maker according to the project.

Why this approach is better than the question "what else to buy"

Because some parts may not be purchased as finished goods at all.

The body, for example, can be made to individual sizes. The facade can also be custom. Therefore, the correct term is a component list, not a "shopping list".

The dresser frame is not a construction set with a predetermined number of drawers

The height of 160 mm sometimes provokes another fantasy:

"Probably, this is a base for a dresser with three drawers."

Or:

"A body for four drawers should fit here."

Neither the number of boxes nor their dimensions are specified by confirmed data STL-026-13.

The future item can only be designed after obtaining the necessary dimensions and interfaces.

Why the number of boxes cannot be determined by the width of 780 mm

The width of the body says nothing about the vertical layout.

Why the number of facades cannot be determined from a photograph

The photo shows the external appearance of a specific product presentation, but does not turn it into a mandatory configuration for any order.

What is needed instead of guesses

Draw a facade diagram of the future dresser.

For example:

• three wide drawers;

• two rows of small drawers;

• drawers plus a door;

• another original composition.

After that, guides, handles, and other elements are selected.

When it makes sense to buy a frame for a dresser separately from the body

Purchasing a separate wooden base is especially clear in custom furniture production.

The client wants to use an expressive wooden structural element, and have the body made for a specific interior.

In this scheme, STL-026-13 becomes a fixed initial part.

Then the furniture maker designs around it:

• body;

• facade grid;

• internal filling;

• hardware;

• finishing.

If you want to compare other options in this group, you can open the category and buy a frame for a dresser only after comparing sizes and visual shape.

The finished dresser and STL-026-13 solve different purchasing tasks

Let's imagine two customers.

The first one needs a piece of furniture tomorrow: to place it in the bedroom, put things away, and use it.

The second one is creating a custom dresser according to a project.

For the first one, buying a single STL-026-13 by itself does not solve the task.

For the second one, a wooden frame can be exactly the initial part from which the entire piece of furniture is built.

The difference is not in "better" and "worse"

A finished dresser and a furniture frame are at different stages of the product.

A finished item already has:

• an approved overall height;

• a specific storage system;

• facades;

• hardware;

• a finished appearance.

STL-026-13 is the basis of the project, whose characteristics need to be linked to subsequent manufacturing.

Beech dresser frame or oak: the wood species must be included in the count

Beech and oak are available in STL-026-13.

Therefore, the entry:

Frame STL-026-13 — 1 pc.

insufficient.

Minimum:

STL-026-13, 780 × 500 × 160 mm, beech, «Prestige», prepared for enamel, 1 pc.

or

STL-026-13, 780 × 500 × 160 mm, oak, «Prestige», prepared for enamel, 1 pc.

Why the material cannot be left «as is»

If the wood remains visible in any part of the future product, the species participates in the external appearance.

Even with subsequent opaque finishing, the material is still a characteristic of the ordered part and must match the invoice.

Beech and oak cannot be mixed within one order by accident

If two identical dressers should look like a pair, the species should be fixed identically, unless the project specifies otherwise.

Preparation for enamel is not finished painted furniture

The phrase "for enamel" also requires correct interpretation.

It refers to the preparation of the selected configuration.

This does not mean that the buyer receives an already painted frame in the final color.

Before ordering, it is advisable to specify separately:

• what preparation is included;

• who performs the final finishing;

• when it is performed — before or after assembly;

• how the color will be agreed upon.

Why finishing should be linked to the future cabinet

If the wooden base and the body are to look like a single item, their surfaces must match in design logic.

For example, a frame for enamel and a body of a different color can be a deliberate contrast.

But if one color is intended, both materials need to be matched according to a sample.

Sanding "Prestige": fixing the name is not enough if the painter expects a specific surface

The card confirms the quality of "Prestige" sanding.

This needs to be carried over into the order.

But further preparation before enamel is still coordinated by the finisher.

One should not write in the technical specification:

"After 'Prestige' you can paint immediately without preparation,"

if there is no such confirmation.

What to send to the painter

• material;

• article number;

• sanding quality;

• selected preparation;

• a photo or sample;

• requirements for the final color.

This way the specialist can determine their own technological sequence.

The dresser frame in disassembled form: the box is first received, then assembled

Disassembled delivery is convenient for logistics and working with furniture production, but requires incoming inspection.

Before assembly, you need to ensure that the actually received set matches the order.

Check the number of wooden parts

For this, a packing list or inventory is needed.

Check the fittings

Not just the presence of the package, but compliance with the published or confirmed packing list.

Check the condition of the components

Before finishing and assembly, it is easier to identify transport damage.

Verify the article number and material

Especially when several furniture frames arrive at the site at the same time.

Which documents are useful to request along with STL-026-13

We do not claim that this entire set of documents is automatically included in every box.

This is a list of what the buyer would benefit from receiving or requesting:

• current drawing;

• diagram of wooden parts;

• packing list;

• list of fittings;

• marking of elements;

• assembly recommendations;

• information on mating with the future body;

• attachment points or zones;

• recommendations for further finishing.

Why the drawing is especially important

The size 780 × 500 × 160 mm describes the overall dimension, but the future body needs mating parts.

Where can I rest it?

Where to attach?

Which surfaces should align?

Without a drawing, the furniture maker starts designing "by picture."

For expensive custom furniture, this is a weak foundation.

Wooden base for a dresser: what dimensions to provide to the cabinet manufacturer

The furniture maker should receive not just the article name.

Provide a separate card for the original part.

For example:

STL-026-13
Size: 780 × 500 × 160 mm
Material: beech / oak — on request
Grinding: "Prestige"
Preparation: for enamel — if this configuration is selected
Delivery: disassembled frame with the stated set of hardware
Body mating: according to the current drawing

After that, the designer adds their own dimensions.

Do not specify the body "by eye" as 780 × 500 mm

If the body must fit exactly onto a wooden base, its actual support geometry needs to be understood.

For example, without a drawing it is impossible to decide:

"We make the body 780 × 500, it will match exactly."

The external dimensions of the frame and the contact area may differ.

Therefore, first the drawing STL-026-13, then the body.

The top cover or dresser top is a separate issue

The card confirms the frame, but does not provide grounds to automatically include the top cover of the future dresser in the delivery.

If the project provides for it, it is necessary to determine:

• material;

• size;

• thickness;

• the overhang relative to the body;

• color;

• the method of joining.

This part significantly affects the final dimensions.

Why the total width of the dresser cannot be derived from 780 mm

The top may protrude beyond the frame.

Or it may coincide.

Without a project, both options are merely assumptions.

Back panel: a small detail with a big impact on installation

The presence of a back panel in the STL-026-13 kit is not confirmed by the card.

But when designing the future dresser, it affects:

• overall depth;

• body rigidity;

• adjacency to the wall;

• cutouts for baseboard;

• internal volume.

Therefore, the question about the back panel should arise even before ordering the cabinet parts.

Floor baseboard and the depth of the future dresser

Here, a natural connection with the interior emerges.

If the dresser is to stand close to the wall, the position of its body and base must be coordinated with the floor trim.

When planning for the room buy wooden skirting board, its actual dimensions need to be shown on the plan before the furniture maker finalizes the depth of the body.

Otherwise, a familiar problem arises

The dresser is calculated "to the wall."

On site, a baseboard is discovered.

The furniture is moved away by its thickness.

This results in an unplanned gap.

This is not a problem with STL-026-13 as a product, but an error in coordinating two parts of the interior.

Drawers: first the structure, then the number of handles

The commercial query "buy handles for a dresser" looks natural next to STL-026-13.

But handles cannot be counted simultaneously with the frame until the facade scheme is determined.

If the dresser has three drawers — one quantity.

If six — another.

If some facades open differently — a third.

Therefore, after approving the body and facades, you can buy handles for the dresser already based on the actual number and sizes of the fronts.

The center-to-center distance of the handles is determined after the facades

Not the other way around.

First:

• facade width;

• height;

• design;

• thickness;

• installation location.

Then the handle and its seating.

Why you shouldn't buy the handle 'along with the frame'

This can only be justified if the entire dresser is already designed.

If the project doesn't exist yet, buying handles early creates constraints.

For example, the client chooses long handles, but after design it turns out the facades have become narrower.

Or the dresser now has more small drawers.

Guides cannot be automatically included in the concept of 'hardware kit'

This is one of the most dangerous assumptions.

The buyer sees:

with a set of fittings

and concludes:

“That means the drawer slides are definitely there.”

No.

Without a breakdown of the contents, such a claim cannot be made.

Likewise, the opposite cannot be claimed either—that they are definitely not there.

What to write to the manager

“Does the STL-026-13 fittings set include any fittings for future drawers? If so, please list the items, quantities, and purposes.”

This way, the question becomes verifiable.

The number of drawers is determined not by STL-026-13, but by the cabinet design.

That is why slides are purchased after the front and cabinet diagrams.

Need to know:

• number of boxes;

• their width;

• depth;

• height;

• body material;

• cabinetmaker's requirements.

Without this data, the selection of mechanisms will be random.

Legs for a dresser: are they even needed if STL-026-13 is present

The query is semantically strong: "buy legs for a dresser."

But here it is especially easy to insert a link meaninglessly.

STL-026-13 is already a furniture frame of a specific geometry. It cannot be assumed that additional legs are necessarily required for it.

They are considered only when the project actually provides for separate supports.

Then you can buy legs for a dresser after checking:

• installation locations;

• height;

• connection method;

• of the future total height of the furniture;

• number of supports.

160 mm cannot be considered a "space for legs"

This figure refers to the size of the frame, not automatically to the free zone for additional support.

How additional support changes the entire project

Suppose the designer decided to raise the future dresser on separate legs.

Will change:

• total height;

• position of the body;

• distance from the floor;

• visual proportion;

• interaction with the baseboard.

Therefore, legs cannot be chosen only for their appearance.

Facade decor: buy after the facades themselves are approved

STL-026-13 can serve as the basis for both a calm modern dresser and more decorative furniture.

If the project includes carved elements, a facade grid is created first.

And only then can it be to buy carved wooden decor to specific dimensions.

Why decor cannot be bought in advance

The overlay must match:

• the width of the facade;

• height;

• the free field;

• the handle;

• in the frame;

• in the direction of opening.

Otherwise, a beautiful element will remain without a suitable place.

Wooden elements for furniture: one material does not yet make a set compatible

The frame may be oak, the handle — oak, the decor — oak.

But this does not guarantee automatic compatibility.

Need to check:

• sizes;

• function;

• installation;

• future finishing;

• visual scale.

Material is only one of the criteria.

Dresser for enamel: the color is coordinated immediately on all visible parts

If STL-026-13 is purchased with preparation for enamel, and the body will also be painted, it is advisable to determine in advance which surfaces should match in color.

In the statement, you can create a separate column:

This way, the painter gets a single reference point.

Why the same color name is not enough

"White" can be cool or warm.

"Gray" can lean toward blue, beige, or green.

Therefore, for a unified item, it is better to use a physical sample or a precise system adopted in the project.

Finished furniture made from different materials requires a trial assembly

STL-026-13 — wood.

The future body may be made of a different furniture material.

There is no need to assume that their connection is always obvious.

Before final finishing, it is advisable to check:

• fit;

• sizes;

• gaps;

• fastening zones;

• position of the facades.

First technical compatibility, then decorative finish.

Why assembling the frame and assembling the dresser are not the same action

The disassembled STL-026-13 can be assembled as a separate unit.

But this does not mean that the assembly of the dresser is complete.

Further, the following may be needed:

• case installation;

• installation of the internal part;

• installation of mechanisms;

• installation of facades;

• handles;

• finishing operations.

Therefore, in the production schedule it is better to have two different lines:

Assembly of STL-026-13.

Assembly of the finished dresser.

What the assembler should receive before starting work

Minimum package:

• article number;

• full size;

• material;

• parts diagram;

• list of fittings;

• current drawing;

• frame project;

• the method of joining.

If one item is missing, it is not necessary to stop the entire project, but you need to understand where the missing information will be obtained from.

Check the kit upon delivery: do not put it off until assembly day

Imagine: the frame arrived a month ago, the box was placed in the warehouse. On the day of installation, it is opened and they begin to figure out the contents for the first time.

If a question arises about the parts, the work is already stopped.

It is much more reasonable to perform incoming inspection immediately after receipt.

Record the packaging

This helps to understand how the kit was received.

Verify the number of parts

According to the confirmed list.

Separate the fittings

And compare with the inventory.

Inspect the surfaces

Especially before painting.

The cost of STL-026-13 and the cost of the finished dresser are different budgets

The search phrase "STL-026-13 price" may lead a person to the product card.

But the frame price does not equal the budget of fully finished furniture.

The final project cost potentially includes:

• the STL-026-13 itself;

• body;

• facades;

• mechanisms;

• handles;

• additional decor;

• finish;

• assembly;

• Delivery.

Specific prices cannot be inserted without an up-to-date calculation.

Therefore, you need to compare two estimates.

Estimate 1: purchasing the frame.

Estimate 2: ready-made dresser.

This allows you to honestly evaluate the project.

Component table: the most useful document before payment.

Create it even before ordering STL-026-13.

This table does not confirm the absence of components. It assigns responsibility for their confirmation.

What to buy together with STL-026-13

It is more reasonable to assemble the dresser as the project progresses, rather than with one random basket.

The main principle of the table: sequence matters more than the number of references. Handles are chosen after facades, and individual supports only after deciding whether they are needed at all.

How not to confuse STL-026-13 with a finished dresser

There are four quick signs.

The first is the name "frame"

It directly indicates the structural basis.

The second is the size 780 × 500 × 160 mm

Such a dimension cannot be automatically interpreted as the size of a fully finished piece of furniture.

The third is a disassembled delivery

The buyer still has the assembly stage ahead.

The fourth is a description as a basis for creating a dresser

That is, the further furniture configuration is formed separately.

How not to confuse STL-026-13 with a regular wooden blank

On the other hand, the frame is not just a few random bars that the buyer must independently turn into a furniture base.

This is a specific item with a specified size, wood species, sanding level, preparation option, and a declared set of hardware.

That is why buying a ready-made furniture frame is often more convenient than designing the base completely from scratch.

When STL-026-13 is worth comparing with another dresser frame

There is no need to force this size to fit any project.

It is better to open a category if:

• 780 mm does not fit in width;

• 500 mm does not match the project depth;

• 160 mm does not fit into the design;

• a different base shape is needed;

• a different style is intended.

In such cases, it is more correct to choose another frame for the dresser, than to rework STL-026-13 without technical confirmation.

Non-standard size change: do not saw the frame like a regular blank

The tree provokes thought:

"If 780 mm is too much, we'll shorten it."

But STL-026-13 is a ready-made structural model.

Unauthorized modification may affect:

• connections;

• symmetry;

• hardware;

• connection points;

• the external pattern.

The possibility of modification must be confirmed separately.

Practical situation #1: a designer drew a chest of drawers 850 mm high

What to do with STL-026-13, which is 160 mm high?

Do not subtract:

850 − 160 = 690 mm of the body

and immediately send the part to production.

First, you need to find out how exactly the body is positioned relative to the frame and what other elements affect the height.

Only after this is the size of the body part determined.

Practical situation No. 2: the dresser must fit into a niche 820 mm wide

The frame has a size of 780 mm on one side of the dimension line.

Formally, 40 mm remains.

But this is not enough for a solution.

Need to know:

• final width of the body;

• protrusion of facades;

• top cover;

• baseboard;

• technological gaps.

The niche is checked against the finished dresser, not just against STL-026-13.

Practical situation #3: want six small boxes

The frame itself does not confirm the number of boxes.

The furniture maker designs:

• two or three vertical sections;

• dimensions of the boxes;

• guides;

• Facades.

After that, it is already possible to determine how many handles will be needed.

Practical situation #4: need a minimalist dresser without handles

Then the commercial cluster of handles should not be imposed on the project at all.

If the facades imply a different way of opening, handles are not purchased just because they are often bought with dressers.

SEO should not control furniture design.

Practical situation No. 5: we want carved facades in a classic style

First, the dimensions of the facades.

Then, a free decorative field.

Next, the carved element.

And only after that — the final marking of the handles.

Pra

that to check in the invoice before payment

Do not limit yourself to the name.

Verify:

• STL-026-13;
• 780 × 500 × 160 mm;
• beech or oak;
• "Prestige";
• preparation for enamel, if it is selected;
• quantity;
• wording for the set;
• additional agreed items.

If the invoice simply says "dresser frame," ask for specifics.

Why the article number is needed even when ordering a single item

There are other dresser frames in the category.

The phrase "that frame we looked at yesterday" is not a specification.

The article number STL-026-13 must go through:

• invoice;
• drawing;
• production order;
• acceptance certificate;
• packaging marking.

Mistakes when ordering STL-026-13 that turn the frame into an expensive rework

Mistake 1. Considering 160 mm as the height of the finished dresser

This is the frame size, not the confirmed final height of the furniture.

Mistake 2. Considering 160 mm as the height of the legs

The card does not confirm this.

Mistake 3. Considering 160 mm as the plinth

Also an unconfirmed interpretation.

Mistake 4. Making the body 780 × 500 mm without a drawing

The external frame size does not necessarily equal the support area of the body.

Error 5. Perceiving the "hardware set" as a complete dresser set

Need to request a breakdown.

Error 6. Confidently stating that the drawers fit

Not confirmed.

Error 7. Confidently stating that the drawers do not fit

Also not confirmed.

Error 8. Assuming the guides are included

Not possible until the composition is broken down.

Error 9. Assuming the guides are absent

Same problem.

Error 10. Buying handles before designing facades

Quantity and sizes may change.

Error 11. Buying legs just because it's a dresser

Additional supports may not be needed at all.

Error 12. Ordering decor before facade dimensions

It may not fit.

Error 13. Not accounting for the baseboard

The dresser will have an unplanned gap.

Error 14. Not specifying the wood type

Beech and oak are different product variants.

Mistake 15. Considering "under enamel" as finished paint

These are not the same thing.

Mistake 16. Telling the painter only the word "Prestige"

The finisher needs the entire selected specification.

Mistake 17. Starting assembly without a hardware list

It is unclear whether all elements have been received.

Mistake 18. Opening the box only on installation day

There is no time left to fix discrepancies.

Mistake 19. Throwing away packaging before acceptance

It is more difficult to fix the set.

Error 20. Trim the frame without confirmation

You can change the structural node.

Error 21. Calculate the finished height arithmetically from 160 mm

Without a mating scheme, the calculation is fictitious.

Error 22. Make the same body for a different article

Another frame may have different geometry.

Error 23. Consider the price of STL-026-13 as the price of the finished dresser

These are different budgets.

Error 24. Not to compile a list of components

Some parts are only discovered during assembly.

Error 25. Not identifying the person responsible for the frame

The frame is purchased, but the rest of the furniture is not designed.

Error 26. Not matching the color of the base and the fronts

After painting, they look like two different things.

Error 27. Not checking the top cover

The final width and depth may change.

Error 28. Not accounting for drawer opening near the wall

The room dimensions also play a part in the project.

Error 29. Choosing handles by the frame's article number, not by the fronts

The frame does not set their center-to-center distance.

Error 30. Do not consider a beautiful render as confirmation of the delivery contents.

The visualization shows the idea, not the packing list.

Who STL-026-13 is really suitable for

The frame is especially interesting for those who:

• design a custom dresser;
• work with a furniture maker;
• want a wooden base of a specific shape;
• choose between beech and oak;
• plan custom painting;
• ready to separately develop the body and facades;
• understands the difference between a furniture component and a finished item.

For whom one STL-026-13 will not be enough

If the task sounds:

"I need a fully finished dresser that can be used immediately after delivery,"

purchasing one frame should not be perceived as the entire order.

Either a full project or a ready-made furniture solution will be required.

When it is better to choose a different base

Another frame should be considered if:

• the size 780 × 500 × 160 mm is not suitable;
• the external pattern does not match the project;
• a different scale is needed;
• the future body cannot be properly joined;
• different proportions are required.

This is exactly what the category is for, where you can furniture frames to buy for a specific task.

Commercial route: from STL-026-13 to a finished dresser

The correct sequence looks like this.

1. Choose the base

Item STL-026-13 and material.

2. Get technical data

Drawing, completeness, hardware.

3. Design the frame

Without guessing the external dimensions of the frame.

4. Develop the facades

Number, dimensions, placement.

5. Select mechanisms

Based on the construction of drawers and doors.

6. Choose handles

For the actual facades.

7. Resolve the issue of additional supports

Only if they are provided.

8. Choose decor

After determining free fields.

9. Match furniture with the room

Baseboard, wall, passages.

10. Approve the finish

One sample for related surfaces.

11. Assemble a control sample

Especially for the series.

12. Only after this consider the dresser a finished product

Thus STL-026-13 becomes part of a managed furniture project, not a source of surprises.

FAQ about the STL-026-13 dresser frame

What is the size of STL-026-13?

The confirmed size is 780 × 500 × 160 mm.

Does 160 mm mean the finished dresser will be 160 mm high?

No. The 160 mm refers to the published size of the frame itself. The final height of the future furniture is determined after designing the other elements.

Is 160 mm the height of the legs?

The product card does not confirm this. Calling the size the height of the legs without a technical drawing is not possible.

Is this the height of the plinth?

Such a purpose is also not confirmed.

Is STL-026-13 a finished dresser?

No, the card positions it as a frame, a base for creating a dresser.

Does the frame arrive assembled?

No. Delivery in disassembled form is confirmed.

Does the set include hardware?

Yes, a hardware set is stated.

What exactly does the hardware include?

The full list needs to be requested before ordering. It is not detailed in the provided data.

Are drawers included?

The presence of drawers in the delivery is not confirmed by the card. This needs to be clarified separately.

Can it be stated that there are definitely no drawers?

No. Absence also cannot be asserted without confirmation.

Are the facades included?

Their presence in the delivery is not confirmed by the provided data.

And the guides?

They also require separate confirmation.

Are handles included in the set?

The card does not confirm their presence.

What materials are available for STL-026-13?

Beech and oak are confirmed.

What is the quality of the sanding?

"Prestige".

Is the frame already painted with enamel?

There are no grounds to write that. The selected configuration specifies preparation for enamel.

Can a transparent finish be selected?

The current availability of such a configuration needs to be checked separately before ordering.

Can a cabinet be made with a width of exactly 780 mm?

This size should not be assigned based only on the external dimension of STL-026-13. A drawing and data on the interface are needed.

Should the cabinet depth be exactly 500 mm?

Not necessarily. The cabinet design is developed after checking the actual geometry of the base.

How can I find out the final height of the dresser?

Add up the actual dimensions of all participating structural elements according to the approved design.

Can I simply add the cabinet height to 160 mm?

Only if the drawing confirms exactly this type of joint. Without it, this is just an assumption.

Are separate legs needed?

Only if they are provided for by the design and construction of the future dresser.

Where can I see the legs?

After the project is approved, you can buy legs for a dresser.

When should I buy the handles?

After determining the quantity, sizes, and type of facades.

Where can I see the handles?

You can buy handles for the dresser after the facade diagram is ready.

Can I buy four handles in advance?

Only if the project already confirms four corresponding facades.

Can carved overlays be installed?

If they are provided by the design and fit the dimensions of the facades. First, the free field is determined.

Where can I see the decor?

You can to buy carved wooden decor after approval of the facades.

Do I need to account for the baseboard?

Yes, if the dresser is placed near the wall. The thickness and shape of the plinth affect the actual fit of the furniture.

Where can I choose a wooden plinth?

In the corresponding section, you can buy wooden skirting board.

Do I need to obtain drawing STL-026-13?

For developing your own cabinet, this is highly desirable. External dimensions alone are not enough for professional joining.

What exactly to ask about the drawing?

Ask for the current diagram with full dimensions, part locations, connections, and mating zones of the future enclosure.

Do we need to know the composition of the wooden parts?

Yes. This helps verify the kit upon delivery and correctly assemble the frame.

Can we assemble from a photo?

A photo does not replace a technical diagram.

Can we change the width of the frame?

You should not modify a finished structure on your own without confirmation that such a change is permissible.

Can we shorten the depth?

The same principle applies: any change requires technical approval.

Will STL-026-13 fit for serial furniture?

It can be used in a serial project if the furniture manufacturer has developed a compatible carcass and confirmed the full specification.

What should be done before ordering a large batch?

Assemble one control item and check dimensions, mating, assembly, finishing, and fronts.

Is the price of STL-026-13 equal to the cost of the dresser?

No. The cost of the finished item includes other parts of the project as well.

What other expenses may arise?

Carcass, fronts, mechanisms, handles, additional decor, finishing, assembly, and other elements specified in the project.

Where can I see other dresser frames?

You can open the category and buy a frame for a dresser after comparing sizes and design.

Where can I see all furniture frames?

In the general section, you can furniture frames to buy for different furniture tasks.

How to correctly write STL-026-13 in an order?

Specify the article number, size 780 × 500 × 160 mm, selected wood type, sanding quality, surface preparation, quantity, and confirmed configuration.

Do I need to write "with hardware"?

It is better to record not only the fact of hardware but also the agreed list of what is included in the set.

What to check after delivery?

Article number, material, quantity of wooden parts, hardware set, surface condition, and compliance with the drawing.

Can I paint the frame immediately after unpacking?

First, it is more reasonable to carry out acceptance and trial assembly. The technology for further preparation is determined by the finisher.

What is the main question to ask before payment?

"What exactly is included in the STL-026-13 delivery, and which parts of the future dresser need to be designed and ordered separately?"

This is the central question of the entire purchase.

Final checklist before ordering STL-026-13

While it is not yet known from this table what exactly connects to STL-026-13 and what is included in the delivery set, it is too early to consider the future dresser fully equipped.

STL-026-13 is an already finished wooden base, but not yet a finished dresser

The phrase "dresser frame" should neither disappoint the buyer nor create unnecessary expectations. STL-026-13 should not be evaluated as "too low a dresser with a height of 160 mm." Before us is a different stage of a furniture project: a wooden base measuring 780 × 500 × 160 mm, available in beech and oak, with confirmed "Prestige" sanding, selected preparation for enamel, disassembled delivery, and a declared set of hardware.

Then the furniture maker's work begins.

You need to obtain a drawing, clarify the composition of wooden parts and hardware, determine the body joint, develop facades and internal filling. Only after this does the basis appear for choosing guides, handles, additional decor, and — if the design truly requires it — individual furniture legs.

The most expensive mistake here is not choosing beech instead of oak. It is much more dangerous to buy STL-026-13 with the expectation that the phrase "dresser frame" automatically means the entire set of parts of finished furniture. The product card does not promise this.

Therefore, a strong specification looks not like "dresser STL-026-13 — 1 pc.", but like a full list: frame STL-026-13 + confirmed configuration + body project + facades + mechanisms + hardware + finishing.

The STAVROS company allows you to go through this path sequentially: first choose and order STL-026-13, then, if necessary, compare other furniture frames, select handles, wooden supports and carved decor, coordinate the finished furniture with the baseboard and interior. But the key principle remains the same: you need to pay not for your own assumptions about the word "frame", but for a precisely described configuration. When this issue is resolved before the body production, the 160 mm size ceases to look strange and becomes a normal initial parameter of a professional furniture project.