In the living room, the shelf is wide; in the study, it is compact, but the decor must match: how to buy wooden brackets KR-026 from the same series in two scales

In the living room, a wide open shelf is being designed that should noticeably stand out in the interior. In the study, a more compact shelf or a furniture console is planned. Both areas belong to the same interior, so it is desirable to repeat one decorative motif. However, placing brackets of the same physical size in two locations is not always suitable: a large piece can overwhelm small furniture, while a compact one can get lost under a wide shelf.

KR-026 has a convenient solution for exactly this scenario: one article is produced in five size variations. The decorative pattern is preserved, while the scale changes. Therefore, the living room and study can be connected by one model without forcing two shelves of different sizes to look literally identical.

The key is not to choose the "small" and "large" KR-026 based only on the first digit A. The product card specifies a full combination of A×B×C×D×E for each variation and does not provide the allowable load in kilograms. This means the artistic scale can be selected within one series, but the shelf construction, mounting method, and actual load-bearing scheme must be confirmed by a designer or installer.

If the model is already approved, you can proceed to the card of the wooden bracket KR-026. If different patterns are still being compared, it is more convenient to first Buy shelf brackets through the common catalog.

Go to Catalog

Wooden bracket KR-026: one pattern in five sizes

KR-026 currently has five size variants.

A×B×C×D×E, mm	Beech Standard	Beech Prestige	Oak Standard	Oak Prestige
156×50×43×35×45	3 150 ₽	4 820 ₽	3 640 ₽	5 230 ₽
210×67×58×47×61	3 750 ₽	5 770 ₽	4 620 ₽	6 570 ₽
250×80×69×56×72	4 820 ₽	7 310 ₽	6 400 ₽	8 840 ₽
312×100×86×70×90	5 110 ₽	7 710 ₽	7 170 ₽	9 810 ₽
374×120×103×84×108	8 090 ₽	11 240 ₽	11 690 ₽	15 040 ₽

For custom-order options, the card indicates an average production time of 5–10 days.

Also available:

• Beech;
• Oak;
• Standard;
• Prestige;
• quality of lamination "Under enamel".

KR-026 itself is described both as a shelf support and as a decorative furniture element. For our article, the latter is more important: the buyer can repeat one carved motif in several furniture zones by choosing a different scale of the same model.

A full purchase line should look roughly like this:

KR-026 / 312×100×86×70×90 mm / beech / Prestige / Under enamel / quantity ___ / zone: living room

And not:

KR-026 large — ___ pcs.

Large and small shelf: why the same series matters more than the same physical size

Interior unity does not mean that all repeating details must be identical in dimensions.

If the shelf in the living room is larger and in the study more compact, the same bracket measuring 374×120×103×84×108 mm may look proportional in the first zone and too heavy in the second.

The opposite mistake is to install a compact 156×50×43×35×45 mm under both shelves just for formal uniformity. In a small zone it may work fine, but next to a large shelf it can become visually secondary.

KR-026 allows preserving another type of repeatability:

same ornament → different size versions.

For example:

living room — KR-026 374×120×103×84×108 mm;

study — KR-026 210×67×58×47×61 mm.

This is not a ready-made size recommendation for any furniture. This is an example of a principle: the model remains the same, and the scale is chosen for a specific area.

Our factory also produces:

View Full Product Catalog

Wooden shelf bracket to buy: why you can't look only at size A

The KR-026 card has five parameters:

A×B×C×D×E.

Therefore the phrase:

"I need KR-026 with a height of 250 mm"

is not a complete specification.

For the version with A=250, the card shows:

250×80×69×56×72 mm.

For A=312:

312×100×86×70×90 mm.

For A=374:

374×120×103×84×108 mm.

In the article, you cannot independently assign B, C, D, and E physical functions without the manufacturer's drawing. They must be transferred to the order as a complete combination and matched with the current drawing of the specific version.

If required wooden shelf bracket buy, category search helps to select a model. But after selecting KR-026, all five dimensions must remain in the invoice.

KR-026 156×50×43×35×45 mm: the most compact scale in the series

This is the minimum of the five current versions of KR-026.

Price:

• beech Standard — 3,150 ₽;
• beech Prestige — 4,820 RUB;
• oak Standard — 3,640 RUB;
• oak Prestige — 5,230 RUB.

It makes sense to consider it where the project requires a compact decorative accent rather than a large carved console.

But the word "compact" does not replace checking the drawing. The shelf, base, and fasteners must be calculated separately.

KR-026 210×67×58×47×61 mm: the next scale without changing the pattern

The second version increases the dimensions, but the article number remains KR-026.

Price:

• beech Standard — 3,750 RUB;
• beech Prestige — 5,770 RUB;
• oak Standard — 4,620 RUB;
• oak Prestige — 6,570 RUB.

Such a transition between 156 and 210 mm is especially useful in an interior where you want to maintain the same character of decor, but not jump straight to the large version.

KR-026 250×80×69×56×72 mm: the medium version of the line

The 250×80×69×56×72 mm version sits between the compact and large variants of the series.

Price:

• Beech Standard — 4,820 RUB;
• Beech Prestige — 7,310 RUB;
• Oak Standard — 6,400 RUB;
• Oak Prestige — 8,840 RUB.

For a furniture maker, the full dimension line is important here again. You cannot just provide "KR-026 250 mm" if the project requires checking the actual fit.

KR-026 312×100×86×70×90 mm: a large decorative step within the same model

Execution price:

• Beech Standard — 5,110 RUB;
• Beech Prestige — 7,710 RUB;
• oak Standard — 7,170 RUB;
• oak Prestige — 9,810 RUB.

This version is already noticeably different in scale from 156 and 210 mm, but retains the same article number.

This is where the series' advantage becomes especially obvious: you can create a more expressive shelf in the living room without introducing a new bracket design.

KR-026 374×120×103×84×108 mm: the largest of the five current versions

At the time of verification, this is the largest version of KR-026.

Price:

• beech Standard — 8,090 RUB;
• beech Prestige — 11,240 RUB;
• oak Standard — 11,690 ₽;
• oak Prestige — 15,040 ₽.

For a large furniture composition, such a scale may be appropriate, but the article does not automatically assign it to a "wide shelf." You need to check the actual furniture drawing and construction.

How to choose a second KR-026 without changing the pattern along with the size

The buyer has already selected the first KR-026 for the living room. Now we need to continue the same system in the study.

Correct algorithm:

1. pull up the full specification of the first KR-026;
2. record the material;
3. record Standard or Prestige;
4. record the future finish;
5. open all five size variations of the same model;
6. compare the full combination A×B×C×D×E of the second option with the study drawing;
7. check the visual scale;
8. separately confirm the mounting structure.

Incorrect algorithm:

“In the office, everything is roughly half the size, let’s take KR-026 half the size.”

The ruler does not have to scale strictly proportionally to each specific piece of furniture.

You need to choose a ready-made version from the card, rather than construct a new size yourself.

Example of two zones: 374 mm in the living room and 210 mm in the office

Let’s imagine the designer has already confirmed two versions:

living room — KR-026 374×120×103×84×108 mm;

study — KR-026 210×67×58×47×61 mm.

Let the project provide for two brackets in each zone. This is only an example of a budget — not a universal standard for quantity.

Beech Standard

Living room:

2 × 8 090 = 16 180 ₽.

Study:

2 × 3 750 = 7 500 ₽.

Total:

23 680 ₽.

Beech Prestige

2 × 11 240 + 2 × 5 770 = 34 020 ₽.

Oak Standard

2 × 11 690 + 2 × 4 620 = 32 620 ₽.

Oak Prestige

2 × 15 040 + 2 × 6 570 = 43 220 ₽.

This calculation shows that a single series does not necessarily mean a single budget for each room. A large area objectively uses a more expensive version of the same item.

Beech or oak: two rooms should receive one material specification if the project requires it

The main conflict of the article is not "beech versus oak."

But if the living room and study should look like one decorative system, the material cannot be chosen independently in two orders simply because the second order appeared later.

Basic scenarios:

KR-026 beech + KR-026 beech

Or:

KR-026 oak + KR-026 oak.

Mixing wood species is possible only as a deliberate decision.

This is especially important for open or semi-transparent finishes. If all products are under opaque enamel, the visual difference in wood species may be less noticeable, but the product specification must still be coordinated.

KR-026 "Under enamel": the same pattern won't save two different finishes

The card shows the quality of the "Under enamel" re-lamination.

This means preparation for an opaque finish, not a ready color.

Let's imagine:

• the living room is being finished now;
• the study — in two months.

If the color is left at the phrase level:

"we'll do the same later,"

Two groups of KR-026 may have different shades or different levels of gloss.

Therefore, in the first order, you need to specify:

• exact color or physical sample;
• the primer system;
• enamel;
• gloss level;
• performer;
• the date of sample approval.

For the second batch, the sample must be kept.

Standard or Prestige: processing of two rooms cannot be chosen independently at random

Both polishing levels are available for KR-026.

Standard — machine polishing.

Prestige — more detailed manual processing.

If the first zone is ordered in Prestige, and the second accidentally goes to Standard only because a new buyer chose a cheaper line, the series formally remains KR-026, but the production specification already differs.

This is not necessarily a prohibited option. However, the difference must be deliberate.

If two rooms are perceived as one system, it is easier to fix the same processing category.

Price of Standard and Prestige: how much unified processing adds

Let's take the same example: 374 mm for the living room and 210 mm for the study, two pieces each.

For beech:

Standard — 23 680 ₽.

Prestige — 34 020 ₽.

The difference:

10 340 ₽.

For oak:

Standard — 32 620 ₽.

Prestige — 43 220 ₽.

The difference:

10 600 ₽.

Therefore, the "all Prestige" decision is not a formality. For several zones, it noticeably affects the budget.

That's why it's better to approve the sanding before the first order.

Buy shelf brackets now or a second room later

There are three working scenarios.

Both shelves are already designed

The best option is to immediately compile one specification:

zone 1 — KR-026 / full size / material / sanding / quantity;

zone 2 — KR-026 / another full size / same material / same sanding / quantity.

Even if the shipment will be different, the decisions are already fixed.

The second furniture is still being designed

Then the first order should be kept as detailed as possible.

Not:

"KR-026 oak, large".

But:

KR-026 / 374×120×103×84×108 / oak / Prestige / Under enamel / finish ___ / quantity ___.

The first KR-026 has already been received

Before the second order, documents and the actual part are reviewed, not searching for "something similar by photo."

If the first batch is already painted: we compare the second scale against the real sample

Even if the color code is preserved in the documents, it is better to compare the second batch with the actual product from the first room.

Why?

Because the actual appearance depends not only on the enamel name, but also on preparation, layer thickness, and gloss.

Before finishing the second KR-026, it is useful to have:

• photo of the first area;
• physical color sample;
• material record;
• record of Standard/Prestige;
• finishing workshop data.

So the scale changes, but the decorative system remains manageable.

What to pass to the furniture maker before ordering KR-026

Minimum package:

1. article KR-026;
2. full size A×B×C×D×E;
3. current drawing of the selected version;
4. material — beech or oak;
5. Standard or Prestige;
6. finishing specification;
7. location of each part on the project;
8. confirmed shelf and mounting scheme.

The last point is fundamental.

The KR-026 card does not provide a numerical allowable load in kilograms.

Therefore, you cannot write:

"such a size will withstand so many kilograms."

The load-bearing capacity is determined by the design of the entire shelf, the wall, the fasteners, and the mounting assembly.

Why the KR-026 size cannot be used as a load capacity table

A larger bracket looks more robust, but this cannot be used to derive a numerical load.

The operation of the shelf is affected by:

• wall material;
• fasteners;
• number of supports;
• placement of the brackets;
• shelf material;
• its overhang;
• actual connection scheme.

Therefore, the choice of a "larger KR-026 for a larger load" must be confirmed by the designer, not assumed from a photograph.

In our article, size primarily serves to scale one decorative motif.

How to place an order KR-026 for two shelves

Normal form:

Zone 1 — living room

KR-026 / 374×120×103×84×108 mm / beech / Prestige / Under enamel / ___ pcs. / finish ___

Zone 2 — office

KR-026 / 210×67×58×47×61 mm / beech / Prestige / Under enamel / ___ pcs. / same finish

Key point:

The article number remains KR-026.

Only the selected size option changes.

This is the correct way to keep one series in two scales.

If a second room appears in a year: what to save after the first order

After the first purchase, it is useful to keep a short passport of the decorative series:

Parameter	Value
Article number	KR-026
Size of the first zone	___
Material	___
Sanding	___
Preparation	For enamel
Color	___
Gloss	___
Finishing system	___
Order date	___

In a year, using this record, you can choose a different size of KR-026 without accidentally changing the rest of the specification.

How to compare two sizes of KR-026 before ordering: not by proportion, but by a real mock-up

When the first zone is already decided, there is a temptation to reduce the second bracket "approximately in the same proportion as the shelf." For a finished product line, this is a weak method.

For example, according to A, the minimum KR-026 is 156 mm, and the maximum is 374 mm. The difference:

374 − 156 = 218 mm.

Ratio:

374 / 156 ≈ 2,40.

But this cannot be made into a rule:

if a shelf in a cabinet is 2.4 times smaller, you need exactly KR-026 156 mm.

Furniture has its own proportions: shelf thickness, height of the open niche, distance to the adjacent cornice, facade width, and the overall scale of the wall. Therefore, it is better to compare not the numbers in the table, but two real mock-ups.

Practical method:

1. print or cut out the front dimension of the selected KR-026 at a 1:1 scale;
2. apply it to the spot in the living room;
3. do the same for two or three smaller versions in the study;
4. photograph each layout from the main viewing point;
5. choose a scale that preserves the motif but does not look out of place in size.

Such a fitting does not replace the drawing and calculation of the fastening, but it solves precisely the decorative task of the article.

The same KR-026 in two rooms: which parameters must necessarily match

If the goal is one series, it is useful to divide the parameters into two groups.

May differ:

• the full dimensional combination A×B×C×D×E;
• number of items;
• specific place of application.

Usually kept the same, unless the designer decided otherwise:

• article KR-026;
• the material;
• Standard or Prestige;
• type of preparation for the finish;
• final color;
• Degree of gloss.

This makes it clear that "one series" does not mean copying every digit. The scale changes, but the material-finishing logic remains common.

If the second room intentionally requires a different color or different wood species, that is a separate design decision that should be explicitly recorded in the specification sheet.

What to do if the first size KR-026 has been discontinued or its price has changed

Projects sometimes stretch over months. The first room is ready, while the second is furnished later.

Before reordering, the old invoice cannot be used as the sole source of current data.

You need to reopen the KR-026 card and check:

• the five available finishes;
• the current price;
• the material;
• Standard/Prestige;
• production time;
• current drawing.

If the price has changed, it does not automatically change the selected series, but the budget for the second zone needs to be recalculated.

If the card has changed the product matrix itself, the old specification cannot be transferred blindly. First, confirm that the required finish still corresponds to the current card.

Example of a repeat order: the first KR-026 is already installed in the living room

Suppose the living room already has:

KR-026 / 312×100×86×70×90 mm / oak / Prestige / Under enamel / color per sample No. 1.

Now the study is being designed.

The buyer does not search again for a "carved wooden bracket of a similar style." He starts with the same model KR-026 and checks which of the remaining scales fits the new location.

After selecting, for example, the version 210×67×58×47×61 mm, the new line looks like this:

KR-026 / 210×67×58×47×61 mm / oak / Prestige / Under enamel / color per sample No. 1.

Thus, between rooms, only the dimensional execution changes, while the series is preserved.

Why you can't mix old and new colors "by eye"

Even with opaque enamel, two orders made at different times may be perceived differently if the second finish is chosen only from a photo of the first.

The photo depends on:

• lighting;
• the camera;
• white balance;
• screen;
• surrounding colors.

Therefore, if the decorative connection between rooms is important, it is better to keep a physical sample of the finish or an exact production map.

Discrepancies are especially noticeable on carved relief: side lighting shows not only the color, but also the surface gloss.

When it is better to order two sizes of the same series at the same time

Ordering simultaneously is especially convenient if both furniture zones are already designed.

Advantages:

• one product matrix is checked once;
• material is fixed immediately;
• Standard/Prestige do not diverge by chance;
• finish sample is approved for the entire group;
• It is easier to check completeness before installation.

This does not mean that the manufacturer is obliged to produce all items by one date or that the wood shade will be absolutely identical. The point is in specification management: the buyer closes all parameters in advance and does not restore them from memory after several months.

Passport of the KR-026 series for designer and specifier

For projects with multiple rooms, it is convenient to make one short table:

Zone	Full size KR-026	Material	Sanding	Finish	Quantity
Living room	___	___	___	___	___
Office	___	___	___	___	___
Library	___	___	___	___	___

Such a passport is more useful than the phrase "brackets are the same everywhere."

It shows where exactly the series is the same, and where the scale changes according to the project.

When wooden brackets of the same series should not be purchased

KR-026 does not need to be bought at any cost just to repeat the pattern.

Better to return to the catalog if:

• none of the five sizes fits the actual drawing;
• two rooms are intentionally meant to have different decorative languages;
• the installer has not yet determined the shelf structure;
• the furniture material is not approved;
• finish changes;
• the buyer chose the size only based on the front photo;
• confirmed load-bearing capacity is required, which the card does not contain.

In these cases, it is better to stop the order.

Errors when ordering KR-026 in two scales

Error: placing one physical size in all rooms for the sake of uniformity. Unity can be maintained through one article in different finishes.

Mistake: taking two different brackets just because the furniture differs in size. KR-026 already offers five scales of one pattern.

Error: writing only A. A full combination of A×B×C×D×E is needed.

Error: accidentally swapping beech for oak in the second order. Material is part of the series.

Error: ordering Standard and Prestige in different rooms without a designer's decision. The finish should be fixed in advance.

Mistake: considering a larger size as proof of greater load. The card does not provide numerical data for such a conclusion.

Where to buy wooden shelf brackets and KR-026 separately

If you need to compare different patterns, you can Buy shelf brackets through the common catalog.

If you need a wooden product specifically, the same section allows you to select a model by size and material.

If KR-026 is already approved, it's better to go directly to the product card of the wooden bracket KR-026.

Questions before purchasing KR-026

How many sizes does KR-026 have?

Five.

What sizes are available?

156×50×43×35×45, 210×67×58×47×61, 250×80×69×56×72, 312×100×86×70×90, and 374×120×103×84×108 mm.

Is there a KR-026 made of beech?

Yes.

Is there a KR-026 made of oak?

Yes.

What sanding options are available?

Standard and Prestige.

What does "under enamel" mean?

This is the quality of the glue joint for subsequent opaque finishing, not a finished color.

What is the production time for KR-026 on order?

The card indicates 5–10 days.

Can different sizes of KR-026 be used in the same interior?

Yes, this is exactly what allows preserving one decorative motif at different furniture scales, if the specific dimensions fit the project.

Can the second size be chosen based only on A?

It should not be. You need to check the entire combination A×B×C×D×E and the current drawing.

Can the permissible load be determined by the size of KR-026?

No. The card does not provide a numerical permissible load; the structural design must be confirmed by the designer or installer.

Where can I buy KR-026?

In the card of the wooden bracket KR-026 STAVROS.