Carved shelf PKR-002 for vase and decor: how to check the platform size before ordering

The vase is already at home. Its color matches the upholstery of the armchairs, the pattern supports the carving on the frame, and the proportions fit perfectly into the free wall space. All that remains is to buy the shelf—and the composition seems ready. The PKR-002 card specifies dimensions of 415 × 355 × 225 mm. It seems these data are enough: the width fits, the depth inspires confidence, so the vase should fit.

It is at this stage that the mistake occurs. The size 415 × 355 × 225 mm describes the overall dimensions of the carved shelf, but does not confirm the width and depth of the horizontal platform on which the item will stand. The overall size may include a tall back part, carved decor, a shaped front edge, protruding side elements, and the full depth of the product from the wall. The usable surface almost always requires separate verification using a top view or technical drawing.

Therefore, the question "will the vase fit on PKR-002" cannot be resolved by a simple comparison of three numbers. You need to measure the base of the vase itself, find out the actual shape of the platform, check the position of the object relative to the thread, and make sure that the chosen mounting method matches the wall and the intended load.

This approach is needed not only for a vase. It works when you plan to place a figurine, a table clock, a candlestick, an icon, a porcelain figurine, a decorative bowl, or another collectible item on the shelf. In each case, you check not the widest part of the body, but the part that comes into contact with the horizontal surface.

If you have already chosen an item and want to buy the carved shelf PKR-002, first prepare a few precise measurements. This will take less time than redoing the wall composition after delivery, and will allow you to place the order consciously: with the right material, finish, and confirmed technical parameters.

Carved shelf PKR-002

from 815.50 $

Go to Catalog

What is known about the carved shelf PKR-002

PKR-002 is a decorative wooden wall shelf. Its expressive shape is built not only on the horizontal platform, but also on the carved base, which works as a full part of the wall decor. Such a shelf does not blend into the wall and does not look like a random holder for an object. It becomes an architectural accent: it supports a frame, a panel, a mirror, a console, a classic molding, or an independent composition.

The product card confirms the overall size of 415 × 355 × 225 mm, manufacturing options in beech and oak, "Prestige" sanding quality, and preparation of the beech version for enamel. The item is available on a made-to-order basis.

At the time of preparing the material, the following prices were listed in the product card:

• beech — 64,900 ₽;

• oak — 77,300 ₽.

Cost, availability of options, and ordering conditions may change, so before purchasing you need to find out the price of PKR-002 in beech or oak directly in the product card.

The main takeaway from the table is simple: the card provides enough data to spark interest in the model and assess its overall scale, but additional dimensions are needed to place a specific item.

Watch video ...

Overall dimension and usable area are not the same thing

The numbers 415 × 355 × 225 mm can easily be mistaken for the height, width, and depth of a horizontal shelf. But the overall dimension of a carved piece consists of several parts. It may include all the space the item occupies from the topmost point to the bottom edge and from the wall to the most protruding element.

The usable area is only the horizontal part on which an item can be stably placed. It can be:

• narrower than the full decorative body;

• smaller than the overall protrusion from the wall;

• limited by the shaped front edge;

• partially occupied by the rear carved part;

• have rounded edges, bevels, or other complex contours;

• visually appear wide in a photo, but provide less usable depth.

Without a top view with dimension lines, it cannot be claimed that the platform is 355 mm wide or 225 mm deep. These values may refer to the entire product.

Our factory also produces:

Decorative molding KPU-062

from 177.37 $

Pilaster Base BS-003

from 75.02 $

Mirror frame RM-048

from 1,680.41 $

Wooden molding K-044

from 8.17 $

Wooden Molding K-058

from 53.80 $

Geometric Furniture Leg MN-108

from 101.50 $

Decor Set C-050

from 203.36 $

Ceiling rosette RPU.VRS-001

from 821.72 $

View Full Product Catalog

What could the 415 mm dimension indicate?

The largest vertical parameter is often associated with the overall height of the wall decor. It includes the space from the top point to the bottom point of the carved base.

For the buyer, this dimension is important for another reason: it shows how much wall space PKR-002 will occupy. The shelf should not be checked only against the space for a vase. It is necessary to ensure that the carved body does not collide with a frame, switch, molding, cornice, console countertop, or other object.

The height is also associated with the installation point. If the horizontal platform needs to be at a certain level, the lower part of the carving will extend below it. Therefore, before mounting, not just the shelf line is checked, but the full vertical contour.

What might be included in the 355 mm width?

The overall width may include side carved protrusions, base edges, and decorative parts that are wider than the horizontal surface.

Let's imagine the vase base has a diameter of 220 mm. Comparing 220 and 355 mm creates the impression of a large margin. But if the usable platform between the side elements is noticeably narrower, the calculation will be false.

You need to check the distance between the actual limiters of the shelf. If the front edge is shaped, the width may vary by depth: near the wall it is one, closer to the outer edge it is another.

Why 225 mm cannot automatically be considered the working depth

The full protrusion from the wall and the depth of the space for the item are different parameters. The overall protrusion may include a carved bracket, the lower part of the base, or an angled element that extends forward more than the horizontal platform.

The working depth is measured from the rear boundary, to which the item can be brought, to the front edge of the platform. If there is relief or a vertical decorative part at the back, the base of the vase cannot use the full depth.

There is also the opposite situation: the body of the vase tapers at the base, so the upper part can be closer to the wall without touching the decor. This is already checked against the actual silhouette of the item, not just the base.

First measure the item, then choose the shelf

The buyer often records the height of the vase and its greatest width. For choosing a wall shelf, these numbers are useful but not the main ones.

The most important measurement is the base. It transfers the load to the platform and determines whether the item fits within its contour.

A vase can be wide at the top and stand on a small round base. A figurine can look compact but have an elongated rectangular pedestal. Table clocks sometimes rest not on the entire body but on several legs. For a decorative bowl, the base can be significantly smaller than the rim.

Therefore, before ordering, the item is turned over or carefully lifted, and the lower part is examined.

What dimensions to record

For a round base, the diameter is needed. It is measured along the widest line through the center.

For a rectangular base, record the maximum width and depth.

For an oval base, two axes are needed:

• major;

• minor.

For a shaped pedestal, one size is not enough. It is more convenient to trace the base on paper and use the resulting outline as a template.

Additionally, record:

• the height of the entire object;

• the maximum width of the body;

• the distance from the base to the most protruding part;

• presence of handles, spout, petals, shaped parts;

• position of soft support pads;

• protruding screws or decorative legs;

• actual weight.

Weight cannot be judged by appearance. A small stone or metal figurine may be heavier than a large hollow vase.

Why the body also needs to be considered

The base determines the fit on the platform, but the body determines whether the item will collide with the rear thread, wall, or adjacent decor.

Suppose the base of a vase fits freely on the template. The upper part then widens backward and touches the vertical element of the shelf. Formally, the base fits, but it will not be possible to install the vase in the desired position.

Therefore, two types of checks are performed:

1. from below — along the contour of the base;

2. from the side — along the silhouette of the entire object.

For complex shapes, a photo taken strictly from the side next to a tape measure is useful. It is easier for a manager to understand proportions from such a shot than from a decorative photo taken at an angle.

A round base requires checking not only by diameter

A round vase seems like the simplest option: it is enough to know the diameter of the base and compare it with the width of the platform. But the PKR-002 platform may have a shaped front edge rather than a rectangular one. Then the circle must fit not just between the left and right points, but entirely within the available contour.

If the base diameter is almost equal to the minimum depth of the platform, the front part may protrude beyond the edge. Even when the protrusion looks small, questions arise not only about aesthetics but also about stability.

A round object is checked as follows:

1. obtain a confirmed top view of the platform;

2. build its contour at full scale;

3. cut out a circle with a diameter equal to the base of the vase;

4. place the circle on the template;

5. check the front, back, and side edges;

6. assess whether the vase can be safely placed and removed.

There is no universal margin that fits any vase. A light, stable object with a low center of gravity and a tall, heavy vase behave differently.

A rectangular pedestal cannot be checked only diagonally

Figurines, clocks, icons, and collectible figures often have a rectangular base. The buyer sees that its width is less than the shelf width and its depth is less than the full overhang, and considers the task solved.

The problem arises if the front part of the platform narrows or has a curved edge. The rectangle may fit near the wall but extend beyond the boundaries closer to the facade.

Rotating the pedestal diagonally does not always help either. Such a position:

• changes the orientation of the object relative to the room;

• can disrupt symmetry;

• reduces free space in the corners;

• may bring the body closer to the rear thread;

• makes it difficult to remove the item.

If placing requires rotating the figurine randomly, it's better to check another shelf rather than adjust the composition after installation.

It's more convenient to trace the shaped base on paper

For collectible decor, the base can be complex: multiple supports, wavy edges, protruding paws, or an irregularly shaped stand. Here, the measurement "width × depth" only describes the bounding rectangle.

An accurate method is to make a paper outline.

Place the item on the sheet, holding it in its working position. Trace the base with a thin pencil. If the body prevents the pencil from reaching, mark the edge with several points, then connect them.

On the template, note:

• direction to the wall;

• front side;

• center of the item;

• actual mass;

• height;

• protruding parts of the body.

Such a sheet can be photographed from above and sent to the manager along with the PKR-002 drawing request.

Soft pads also change the fit

At the bottom of a vase or figurine, there may be felt pads, silicone dots, cork elements, or small legs. They affect how the item contacts the shelf.

If the supports are located closer to the edges, each must remain within the usable surface. You cannot rely only on the outer contour of the body.

Soft pads also slightly raise the item. This usually does not create a problem, but for a vase that almost touches the rear decor, even a small change in position can affect the fit.

Check the item in the condition in which it will be used. Do not remove factory protective elements just to make the base formally fit.

Mass and center of gravity matter more than external lightness

A thin porcelain vase may look weightless but be quite heavy. A tall item with a narrow base creates a different scenario than a low wide bowl of the same mass.

Before ordering, you need to know:

• the actual weight of the item;

• height;

• the width of the base;

• the location of the heaviest part;

• whether there will be water in the vase;

• whether flowers, branches, candles, or other elements will be added;

• whether the mass changes during use.

It is especially easy to forget about water. An empty vase and a filled vase are not the same thing. The same applies to a candlestick with large candles or a decorative bowl that is planned to be filled with stones.

The permissible load of PKR-002 cannot be assigned based on the size of the product or the type of wood. It depends on the design of the shelf itself, the mounting points, the wall, and the installation method. This value must be requested before placing an order.

What clearance to leave around a vase or figurine

A universal norm in millimeters would be dishonest here. The required clearance depends on the mass of the item, the shape of the base, the center of gravity, the depth of the platform, and the method of use.

But you can check five practical conditions.

The base is entirely on the shelf.

No support point should hang in the air. Particular attention is paid to the front part of the shaped edge.

The object does not touch the back thread.

Contact can ruin the finish, interfere with a stable position, or create a visual sense of crowding.

Part of the horizontal surface is visible.

A small open edge helps the eye read the object as placed on the shelf, rather than barely holding on to its edge.

This is an aesthetic criterion, not a universal technical standard. It depends on the size and nature of the composition.

The object can be placed and removed.

Hands should not catch on carved elements. If the vase is planned to be regularly filled with water or have flowers changed, access is especially important.

A random touch does not lead to an immediate shift

A tall narrow vase placed flush against the front edge raises more questions than a low wide bowl. The final decision is related to load and installation.

A paper template shows more than a photograph

A photo of the card conveys the shape and style, but does not allow you to accurately try on an already purchased vase. A paper or cardboard template solves this task before ordering.

For it, a confirmed view of the horizontal platform from above is needed. If such a size is not in the open description, first request a drawing.

How to make a platform template

1. Transfer the outer contour of the work surface onto thick paper or cardboard.

2. Mark the wall and the front edge.

3. Mark the zones occupied by the rear decor.

4. Cut out the template.

5. Place the vase on it in the intended position.

6. Look from above.

7. Check all support points.

8. Take a photo of the result.

9. Repeat the check from the side.

10. Send the photos to the manager if doubts remain.

The template should match not the overall dimension of 355 × 225 mm, but the actual usable surface.

Why take photos from above

From above, you can clearly see:

• whether the base protrudes;

• does the open edge remain;

• is the object shifted;

• does it touch the back part;

• can the position be changed;

• does the composition match the center of the shelf.

An angled photo hides some of these issues. A strict top view is more useful than a pretty shot.

When a second template is needed

If you are choosing between a vase and a figurine or want to change seasonal decor, make templates for all items. The shelf may fit one object and not another.

A changeable composition requires checking the largest and heaviest item from the intended set.

Which drawing to request before ordering PKR-002

The phrase "send the shelf dimensions" is too general. In response, you might again get 415 × 355 × 225 mm — the same data that is already in the product card.

The request should be specific.

Ask to provide:

• top view;

• the exact width of the horizontal platform;

• the actual depth of the platform;

• shape of the front edge;

• the size between the side carved elements;

• distance from the wall to the rear boundary of the item;

• the explanation of the designations A, B, and C;

• the side view;

• the location of the mounting points;

• the weight of the shelf itself;

• confirmed permissible load;

• requirements for the wall base;

• recommended installation scheme;

• surface condition before finishing.

If any parameter is not recorded in the available material, it cannot be replaced with an assumption.

Why a top view is needed

The side view shows height and overhang, but does not reveal the narrowing of the platform. The top view provides a contour onto which the base of the object can be overlaid.

What the side projection is for

It helps to understand:

• how close the vase body will come to the wall;

• will it collide with the rear decor;

• where is the horizontal plane;

• how far does the carved lower part protrude;

• how the shelf will look next to a frame or console.

Why designations A, B, and C cannot be interpreted independently

In one card, A may denote width, in another — height or another parameter. Designations are read only together with dimension lines on the drawing.

If A, B, and C are visible on the diagram, ask to explain each value in plain words.

The mounting is checked together with the object and the wall

Even an exact match of the vase base with the platform does not mean the composition can be mounted. The shelf must be secured to a suitable base, and the mounting scheme must account for the total load.

The calculation includes:

• mass of PKR-002;

• item mass;

• additional content;

• method of operation;

• wall material;

• finish condition;

• position of mounting points;

• type of recommended fastener.

The exact fastener should not be chosen based on a general photo. It is selected according to the technical diagram and the wall material.

Concrete or brick wall

Even a strong base requires checking the drilling location. Cables and other utilities may run behind the finish. Brickwork is also non-uniform: the position of the joint and the condition of the material affect installation.

Drywall wall

A drywall sheet cannot be considered an independent universal base for any load. The possibility of installation depends on the profile location, embedded elements, and the agreed mounting scheme.

If the composition is planned during the renovation stage, embedded elements are provided in advance. This is more reliable than looking for a random solution after finishing is complete.

Wooden panel

You need to understand what is behind the visible panel and how it is attached. A thin decorative layer is not necessarily able to bear the load of the entire composition.

Wall with moldings

The molding should not accidentally fall under the mounting plane if this is not intended by the project. Sometimes the shelf is placed inside the frame, sometimes at the intersection of decorative lines. In both cases, first build the full PKR-002 template on the wall.

The mounting height depends on the object, not just the room

A shelf for a vase cannot be hung at an abstract "beautiful height." You need to consider where the top of the object will be, how it will be perceived relative to the eyes, and whether it can be safely reached.

If the vase is regularly taken off, a position that is too high is inconvenient. If the shelf serves as a permanent pedestal for a collectible figurine, the height may be different.

Check:

• level of the horizontal platform;

• full size of PKR-002 down and up;

• height of the object;

• distance to ceiling decor;

• position next to a frame or mirror;

• ability to place the object with both hands;

• Visibility of the composition from the main points of the room.

A full-size cardboard template of 415 × 355 mm helps to evaluate the shelf on the wall. You can attach a paper silhouette of a vase of the desired height to it.

Beech or oak: the material is chosen according to the finish and composition

PKR-002 is available in beech and oak. The choice of wood species affects not only the price. It determines the character of the texture, the finishing method, and the shelf's connection with other wooden elements.

The table does not mean that beech is only suitable for white enamel, and oak only for natural oil. Specific finish options need to be agreed upon before ordering.

When it makes sense to choose beech

Beech PKR-002 is worth considering if the shelf must:

• match the color of the wall;

• continue the painted frame;

• enter into composition with the enameled console;

• obtain a complex decorative shade;

• become part of a light classic wall;

• support the patinated finish, if it is provided for by the project.

Preparing beech for enamel facilitates the choice of material for an opaque coating, but does not replace the approval of the finish itself.

When oak is revealed

Oak is chosen when the texture is to be left visible. Its pattern can connect a shelf with an oak frame, console, wall panel, door, or furniture.

The shade cannot be chosen only by name. "Walnut," "light oak," or "dark oak" look different in different materials. Physical samples or an approved finishing system are compared.

Can an oak shelf be combined with beech furniture?

A composition can be built on contrast or a common tint, but the result cannot be assumed to match in advance. Beech and oak absorb finishing compounds differently and have different grain patterns.

If a uniform color is required, ask for an agreed sample to be prepared.

What does "Prestige" sanding mean?

Sanding describes the quality of wood surface preparation, but is not the name of a finished topcoat.

Before ordering, clarify:

• is PKR-002 supplied without a finish coating;

• what additional preparation is needed;

• can the selected enamel be applied immediately;

• who will perform the finishing;

• how are carved recesses treated;

• is a sample required;

• how to match the color with adjacent products;

• what condition the back side will be in.

Carved decor requires careful finishing. A thick opaque layer can visually soften small details. Too dark a tint, on the contrary, can make deep carving look heavy. These decisions are evaluated by sample, not by color name.

If the shelf must exactly match the interior, you can order PKR-002 with custom finishing after agreeing on the material and available execution options.

PKR-002 in the wall color: the decor does not disappear, but becomes calmer

A shelf painted in the wall color retains volume but reduces color contrast. The carving is readable thanks to light and shadow.

This technique is suitable when the vase or figurine itself should be the main accent. The shelf works as an architectural pedestal, not competing with the object.

For a good result, you need to agree on:

• exact color;

• gloss level;

• wall shade under real lighting;

• color of the frame or moldings;

• character of adjacent materials;

• depth of shadows on the carving.

A matte wall and a glossy shelf of the same color are perceived differently. Therefore, one shade number is not enough.

PKR-002 in the color of the furniture: the composition becomes cohesive

If there is a console, dresser, or cabinet nearby, the shelf color can be tied to the furniture. Then the wall-mounted item is perceived as an extension of the lower group.

In this case, not only the shade is checked, but also:

• furniture material;

• transparency of the coating;

• texture direction;

• degree of aging;

• presence of patina;

• color of metal hardware;

• distance between the shelf and the furniture.

Sometimes an exact match is not needed. The shelf can be one visual step darker and work as a frame for a light vase. But the difference should be set intentionally, not obtained by chance.

What items can be considered for PKR-002

The card describes the shelf as a place for small accessories, souvenirs, and decorative items. This is a direction, not a promise of compatibility with any object.

Vase

For a vase, check the base, the weight of the empty and filled item, the height, the expansion of the body, and the ability to remove it with both hands.

If the vase will have fresh flowers, consider the water. If dry branches, consider the full top dimension of the arrangement.

Figurine

A figurine often has a complex center of gravity. The base may be elongated, and the figure may be tilted forward or to the side.

They check the full silhouette and stability, not just the pedestal.

Table clock

Clocks may have rear adjustment knobs, protruding feet, or pendulum elements. Access is needed for adjustment and battery replacement, if provided by the design.

Candlestick

The base and height are checked. If candles involve an open flame, fire safety requirements and distances to walls, finishes, and wooden elements must be considered. Not every wooden shelf can be deemed suitable for a burning candle without a separate assessment of usage conditions.

It is safer to consider decorative candles or options that do not create an open flame, unless the project provides a special solution.

Decorative bowl

The bowl may have a small base, but the outer rim can be wide. It must not touch the wall or carvings.

If the bowl will be filled, the total mass of the contents is taken into account.

Porcelain figurine

For a fragile figurine, stability and the ability to carefully pick up the item with fingers without touching the shelf decor are especially important.

Icon

It is necessary to check not only the base, but also the installation angle. If the icon rests on a separate stand, the entire set is measured.

Placement is also linked to the purpose of the room and the overall composition of the icon corner.

Collectible item

The value of the item increases the requirements for installation. In the request, the actual weight and the need for safe placement must be specified separately.

Shelf for a single item or for a small group

PKR-002 is expressive on its own, so it is not necessary to gather many small accessories on it.

A single item is suitable if:

• it is sufficiently noticeable;

• its proportions are consistent with the shelf;

• a visually readable surface remains around the base;

• The wall composition has a clear center.

A group of several items requires a different check. You need to build a common template of all bases and see if the items overlap each other.

Small decor should not cover the carving so much that the shelf turns into an inconspicuous stand. On the other hand, a too small figurine may get lost against the expressive body of PKR-002.

Where to place PKR-002 in the living room

In the living room, the shelf can become part of the wall above a console, dresser, fireplace area, or armchair.

Above the console

The composition is built vertically:

1. the console sets the lower volume;

2. the shelf supports a vase or figurine;

3. a frame or mirror connects the upper part of the wall;

4. side elements create symmetry.

You don't have to use everything at once. Sometimes one shelf and a frame are enough. But the distances between elements need to be checked against the templates.

If a ready-made lower base for the composition is required, you can buy a classic solid wood console and match its width with the position of PKR-002.

In the fireplace area

The shelf can support the classic rhythm of the wall, but it cannot be placed without considering the heat source and the requirements for the specific fireplace.

If it's a decorative portal without heating, the composition is treated as an interior one. Near an active heat source, separate technical restrictions are needed.

Between windows

A narrow wall section is suitable only after checking the full dimensions of 355 mm in width and 415 mm in height. Curtains must not touch the item or the shelf.

Near the armchair

Here, the mounting height and the risk of accidental contact are especially checked. A tall vase near a movement zone may not be the best choice.

PKR-002 in the hallway: beautiful, but not in the path of movement

In the hallway, a wall shelf helps create an expressive focal point near a mirror or console. But this space is associated with active movement, outerwear, and bags.

Before installation, check:

• whether the shelf protrudes into a narrow passage;

• whether an opening door will hit it;

• whether coats and scarves touch the threads;

• whether an item can be placed safely;

• whether a fragile vase is in the zone of accidental impact;

• whether there is enough light.

For a compact hallway, it is sometimes better to choose a different model. In in the section where carved shelves are presented — prices and sizes, you can compare the overall dimensions of several items.

Shelf under the mirror: first the frame, then the axes

If PKR-002 is placed next to the mirror, the shelf and frame must have a clear connection.

Options:

• the shelf strictly along the central axis of the mirror;

• two shelves symmetrically on the sides;

• one shelf below the frame as a separate pedestal;

• shelf inside the molding frame;

• shelf above the console, and the mirror — higher.

To buy a carved frame for a mirror and not get a random set of parts, compare in advance the width of the frame, the size of the shelf, and the full silhouette of the item.

A large vase under a small frame will weigh down the bottom of the composition. A frame that is too wide can visually reduce PKR-002. These proportions are better checked on a frontal sketch.

Paired installation: two identical shelves require precise marking

Two PKR-002 can support a symmetrical wall: on the sides of a mirror, painting, opening, or central panel.

Pairing amplifies any mistake. If the platforms are at different heights or the items have noticeably different scales, the composition looks random.

For a pair, check:

• the same mounting height;

• the distance to the central axis;

• lighting direction;

• the finish shade;

• wood grain pattern;

• the mass of the items;

• the symmetry of the bases;

• identical placement of vases or figurines.

Items don't have to be completely identical, but their visual weight should be comparable.

A single shelf as a wall-mounted pedestal

PKR-002 can be used without a symmetrical pair. A single shelf works stronger if it has a clear reason to be exactly at that spot.

Such a reason could be:

• the center of a narrow wall;

• the axis between doors;

• the space above a console;

• the vertical line under a light fixture;

• a niche;

• the completion of a molding frame;

• connection with the floor or furniture pattern

  when PKR-002 is not suitable

  It is reasonable to reject the model if after checking it turns out that:

  • the base of the item does not fit on the usable area;
  • the body touches the rear thread;
  • the item cannot be placed safely;
  • the actual load is not confirmed;
  • the wall is not prepared for installation;
  • the full protrusion obstructs the passage;
  • the height of 415 mm conflicts with the adjacent decor;
  • a significantly more compact shelf is required;
  • a long horizontal surface for a group of items is needed;
  • the custom item does not meet the project timeline;
  • the carving style is not supported by the overall composition;
  • the installation and maintenance route is inconvenient.

  Do not convince yourself that the item “almost fits.” In the catalog you can buy carved wooden shelves of other sizes and shapes.

  What to replace PKR-002 with if the area is small

  First, determine which specific parameter is not suitable.

  If there is not enough width, look for a shelf with a longer horizontal part.

  If the depth is insufficient, compare the top view rather than the overall front dimension.

  If the back decor interferes, a model with a different platform design is needed.

  If the item is too heavy, the issue cannot be solved only by increasing the shelf size. A technically confirmed solution for load and mounting is required.

  If the composition consists of several items, it may be better to use a console instead of a single wall shelf.

  In this section you can choose a wall shelf made of beech or oak based on the overall task, and then request a drawing of the specific model.

  Shelf or console: different tasks

  A wall shelf frees up the floor and creates the effect of a floating pedestal. A console provides a larger surface and rests on its own frame.

  PKR-002 is suitable when:

  • need one expressive object;
  • wall composition is important;
  • the floor should remain free;
  • the object corresponds to the useful area;
  • the wall allows coordinated installation.

  A console is more reasonable when:

  • there is a lot of decor;
  • objects are regularly rearranged;
  • a wide surface is needed;
  • furniture volume is required below;
  • The wall mount raises questions;
  • The composition should be more large-scale.

  You can Order a console and a wall shelf in the same style, but it is not necessary to use them on the same wall. Sometimes one element is better than the other.

  What to buy together with PKR-002

  Related products are needed not for the sake of the number of items in the order, but to solve a specific compositional task.

  Element	Why it may be needed	What to check
  PKR-002	Support for a vase, figurine, or other item	Useful surface area, load, material, and finish
  Carved frame	Creates a vertical center above the shelf or next to it	Proportions, width, color, and axes
  Classic console	Forms the lower part of the wall composition	Height, width, distance to the shelf
  Other carved shelves	Allow selecting a different size or a paired option	Drawing of each model, not just the appearance
  Moldings and carved decor	Create a frame or architectural structure of the wall	Joints, dimensions, and distances to PKR-002
  Design project	Helps check the composition before ordering	Wall scale, axes, colors, and a full set of elements
  Delivery	Allows you to receive products as one consistent batch	Timelines, packaging, route, and acceptance procedure

  If you want to assemble the wall entirely, you can order wooden decor for the wall and simultaneously check whether the carving overloads the composition.

  How to connect a frame, a shelf, and a vase

  The three items must have a hierarchy.

  Usually, one of them becomes the main one:

  • frame;
  • vase;
  • carved shelf.

  If all three are equally complex and contrasting, the eye doesn't know where to look.

  Main vase

  Choose a calm shelf finish and a laconic frame. Leave enough air around the vase.

  Main frame

  The shelf and object become the lower completion. Their width should not compete with the frame.

  Main shelf

  Choose an object of simple shape that doesn't cover the carving or compete with its pattern.

  For a complex wall, you can order a wooden frame in a composition with a shelf after building the general frontal sketch.

  Carved shelf inside a molding frame

  The molding frame helps highlight a section of the wall, but its internal size must account for the full dimensions of PKR-002 and the item.

  Check:

  • shelf width 355 mm;
  • product height 415 mm;
  • vase height;
  • distance to the upper molding;
  • side margins;
  • lower carved element;
  • mounting point;
  • shadow from the relief.

  You cannot first assemble a narrow frame and then try to fit a shelf of one width into it. A tall vase may extend beyond the top boundary.

  Lighting of the carving and the object

  Side light emphasizes the depth of the carving. Frontal uniform light makes the form calmer. A too harsh overhead source can create a heavy shadow under the shelf.

  Before installation, check the composition in daylight and evening lighting. The color of wood and enamel changes depending on the light temperature.

  If the vase is glass or glossy, reflections can become more noticeable than the carving itself. A matte object behaves more calmly.

  Backlighting cannot be added without assessing the electrical system, heating, and installation method. In the initial data PKR-002, built-in backlighting is not confirmed.

  What to send to the STAVROS manager

  The more precise the request, the lower the risk of getting a general answer instead of the required parameter.

  Prepare:

  • SKU PKR-002;
  • photo of the item from the front;
  • photo of the item from the side;
  • photo of the base from above;
  • width and depth of the base;
  • diameter, if the base is round;
  • paper outline, if the shape is complex;
  • full height;
  • maximum width of the body;
  • actual weight;
  • information about the contents of the vase or bowl;
  • photo of the wall;
  • size of the free area;
  • wall material;
  • planned height of the platform;
  • desired wood species;
  • finish type;
  • neighboring products;
  • delivery city.

  It is better to ask questions in separate sentences:

  1. What is the exact size of the useful horizontal platform?
  2. Can I get a top view with dimension lines?
  3. What do the parameters 415 × 355 × 225 mm mean?
  4. What is the confirmed permissible load?
  5. Where are the mounting points located?
  6. What requirements apply to the wall?
  7. Which installation method is recommended?
  8. In what condition is the surface delivered?
  9. What finishing options are available?
  10. What are the current price and production time?

  How to order PKR-002 without errors

  Purchasing starts not with the order button, but with compatibility checking.

  Step 1. Measure the base of the item

  Record the width, depth, shape, and actual weight.

  Step 2. Check the housing

  Find out the height, maximum width, and protruding elements.

  Step 3. Open the PKR-002 card

  Verify the overall size, material, and current cost.

  Step 4. Request a technical drawing

  Need the usable area, top view, mounting points, and allowable load.

  Step 5. Make a template

  Place the item on a paper copy of the area.

  Step 6. Check the wall

  Determine the base material and the presence of prepared mounting.

  Step 7. Choose beech or oak

  Match the wood species with the future finish and neighboring items.

  Step 8. Coordinate the color

  Don't limit yourself to the shade name. Clarify the possibility of a sample.

  Step 9. Confirm the order

  Before launching, re-check the article number, material, finish, and technical data.

  Step 10. Arrange receipt

  Study in advance payment and delivery terms for carved decor.

  Why a custom item requires more precise preparation

  PKR-002 is available on order. This is not a reason to postpone the choice, but a reason to prepare the initial data more carefully.

  For ready-made goods, you can sometimes quickly compare actual sizes in stock. A custom product is better to coordinate before launch:

  • wood species;
  • surface preparation;
  • color;
  • useful platform;
  • mounting method;
  • load;
  • installation location;
  • adjacent elements.

  The phrase "make it the same as in the photo" is insufficient. The photo does not convey the size of your vase's base or the wall material.

  How to check the price without losing the technical meaning of the order

  Price is important, but it cannot be discussed separately from execution.

  When comparing beech and oak, clarify:

  • whether the cost applies to the desired option;
  • what is included in surface preparation;
  • whether finishing is included;
  • how is delivery arranged;
  • is separate color approval required;
  • what parameters need to be confirmed before launch.

  The low price of a randomly selected model does not compensate for the mismatch of the platform. First, the function is checked, then the cost is compared.

  Acceptance of PKR-002 after delivery

  Inspect the product before finishing and installation.

  Check:

  • article number;
  • wood species;
  • overall size;
  • compliance with the agreed option;
  • horizontal platform;
  • carved decor;
  • corners and protruding elements;
  • reverse side;
  • surface preparation;
  • set of documents;
  • availability of agreed installation information.

  If the shelf is to be painted together with other elements, compare the parts before applying the coating. A material error is easier to detect before starting work.

  Do not place the vase on an unsecured shelf for a photo. First, the agreed installation is performed, then stability is checked, and only after that the item is placed.

  Mistakes due to which the vase does not fit

  Mistake 1. The size 355 × 225 mm was taken as the platform

  This is the overall dimension, not the confirmed working surface.

  What to do: request a top view.

  Mistake 2. Measured the body, but not the base

  The wide upper part of the vase does not show its seating.

  What to do: measure the contact point with the shelf.

  Error 3. For the round base, a chord was recorded instead of the diameter.

  The ruler did not pass through the center, so the value turned out to be smaller.

  What to do: measure several directions and find the maximum.

  Error 4. The shaped front edge was not taken into account.

  The base fits in width, but protrudes forward.

  What to do: use the full contour of the platform.

  Error 5. Forgot about the rear thread.

  The vase body touches the decor before the base reaches the wall.

  What to do: check the side silhouette.

  Error 6. Did not add the mass of water

  The empty vase passed the preliminary assessment, but the filled one did not.

  What to do: report the maximum operating mass.

  Error 7. Chose the fastener based on a photo

  The wall material and mounting points have not been checked.

  What to do: request a diagram and select the mounting based on the base.

  Error 8. Placed the shelf in a walkway

  The protruding composition gets caught on clothing or bags.

  What to do: make wall and floor templates.

  Error 9. Chose the color based on the screen

  After finishing, the shelf did not align with the frame or furniture.

  What to do: approve the sample.

  Error 10. Paired shelves were mounted without a common axis

  A slight height difference became noticeable.

  What to do: apply a single horizontal line and central reference points.

  Error 11. Ordered several items without a common template

  The bases fit separately, but do not fit together.

  What to do: lay out the entire group on the site plan.

  Error 12. Chose PKR-002 only because of the thread

  The shape was liked, but the technical task remained unresolved.

  What to do: first check the item, the wall, and the load.

  Who the carved shelf PKR-002 suits

  The model is worth considering if:

  • a wall pedestal for one item is needed;
  • the overall size 415 × 355 × 225 mm fits the wall;
  • the buyer is ready to request a useful platform;
  • expressive carved decor is appropriate in the interior;
  • a version in beech or oak is required;
  • enamel or tinting is planned;
  • the shelf will become part of a composition with a frame or a console;
  • the wall allows for coordinated installation;
  • the custom item meets the project deadlines;
  • the item can be safely installed and removed.

  PKR-002 is especially interesting where a regular straight shelf would look too utilitarian. It doesn't just hold a vase, but turns it into part of the wall's architecture.

  Who should choose a different model

  Another shelf will be needed if:

  • the item is significantly wider than the useful area;
  • a long surface is required;
  • a nearly invisible modern bracket is needed;
  • the wall is not suitable for the load;
  • the shelf is in an active walkway area;
  • the composition requires a smaller protrusion;
  • the item is regularly removed, and access is inconvenient;
  • the custom deadline does not fit;
  • oak or beech do not match the project;
  • the carved shape competes with other large decor.

  In that case, you can order a classic wall shelf of a different shape, after repeating the same verification procedure.

  FAQ: answers to questions about PKR-002

  What is the exact size of the usable area of PKR-002?

  This size is not separately specified in the original text specifications. Before ordering, you need to request a top view and the width and depth of the horizontal surface.

  What does the size 415 × 355 × 225 mm mean?

  This is the overall dimension of the product. It cannot be automatically assumed that the last two values equal the usable width and depth of the platform.

  Will a vase with a diameter of 200 mm fit on PKR-002?

  Without a confirmed platform outline, it is impossible to answer precisely. You need to overlay a circle with a diameter of 200 mm on the top view and check all edges.

  How to correctly measure a round base?

  Measure the maximum distance through the center. To verify, repeat the measurement in several directions.

  Should the vase be measured at its widest point?

  For placement, the base remains the main factor. The widest part of the body is measured additionally to check contact with the wall and the rear thread.

  How to measure an irregularly shaped figurine?

  Trace its base on paper. Then label the front side, weight, and protruding elements of the body.

  Can an item with a slight overhang be placed beyond the edge?

  Without technical confirmation, it's better not to accept this option. The base and all support points must be reliably positioned on a useful surface.

  What clearance is needed around the vase?

  There is no universal value. The clearance depends on the shape, mass, center of gravity, and how often the vase is removed.

  Can a clock be placed on PKR-002?

  A table clock can be considered if its base fits, the mass corresponds to the confirmed load, and access to adjustments remains.

  Will the shelf be suitable for an icon?

  It will be suitable only after checking the base and the overall placement scheme. If a separate stand is used, the entire set is measured.

  Can a candlestick be placed?

  A decorative candlestick is checked as a regular item. Using an open flame requires a separate fire safety assessment and distances to wood and wall.

  How to find out the permissible load?

  Request the confirmed value for PKR-002 from the manager. Do not calculate it based on the overall size or wood species.

  Is the mounting hardware included in the kit?

  In the source data, the fastener composition is not confirmed. The configuration and recommended installation scheme need to be clarified before ordering.

  Can I install a shelf on drywall?

  The possibility depends on the profile, embedded parts, wall construction, and approved fastening. The mere presence of drywall is not sufficient.

  How to choose the installation height?

  First determine the level of the platform, then add the height of the item and the full dimension of the carved housing. Also check access for installing and removing the vase.

  How does beech differ from oak in this model?

  The beech option is confirmed with preparation for enamel. Oak is more often chosen for finishes with visible texture, but the specific coating must be agreed upon.

  Can beech be painted to match the wall color?

  This scenario corresponds to the confirmed preparation of beech for enamel. The color, gloss, and finish composition are agreed upon before ordering.

  Can oak be tinted?

  Oak is considered for finishes with visible texture, but the specific tinting option must be confirmed for the order.

  What does "Prestige" sanding mean?

  This is a characteristic of surface preparation. It does not automatically mean an applied finish coating.

  Is PKR-002 sold ready-made or made to order?

  The original product card indicates the status "made to order." The current status should be rechecked before placing an order.

  How much does PKR-002 cost?

  At the time of preparing the material, prices were listed as 64,900 ₽ for beech and 77,300 ₽ for oak. See the product card for the current price.

  Can I order two identical shelves?

  The possibility of ordering the required quantity is clarified with the manager. For a paired composition, also coordinate the material, finish, and placement.

  How can I achieve the same color for two shelves?

  Order them in the same agreed finish and discuss acceptable differences in natural wood. An absolutely identical wood grain pattern cannot be guaranteed without appropriate confirmation.

  Can PKR-002 be used without a vase?

  Yes. You can place a figurine, clock, decorative bowl, icon, or another item on the shelf that fits the base, weight, and placement conditions.

  Where can I see other models?

  You can buy wooden shelves for the wall in the catalog after comparing sizes and drawings.

  Can I order the entire composition?

  For a complex wall, you can order a design project for a wall with carved decor, providing dimensions, photos of the room, and selected items.

  How to arrange delivery?

  Before placing an order, clarify the delivery time, packaging, city, and method of receipt. The final order can be placed as PKR-002 with delivery after checking the technical parameters.

  Ready sequence of actions before purchase

  Don't start with the question "oak or beech." First, make sure the shelf solves the main task.

  The procedure is as follows:

  1. Measure the base of the vase or another item.
  2. Record the actual weight.
  3. Photograph the item from the front, side, and bottom.
  4. Check the free space on the wall.
  5. Open the PKR-002 card.
  6. Request a top view of the usable area.
  7. Obtain data on load and fastening.
  8. Make a paper template.
  9. Place the item on the template.
  10. Check the housing and rear thread.
  11. Determine the mounting height.
  12. Match the wall material.
  13. Choose beech or oak.
  14. Confirm the finish.
  15. Match the shelf with the frame, bracket, or moldings.
  16. Check the current price.
  17. Clarify the order timeline.
  18. Arrange delivery.
  19. Inspect the item before finishing.
  20. Perform installation according to the confirmed scheme.

  If uncertainty arises at any stage, it's better to pause and request the missing parameter. In custom furniture and decor, a precise question is more valuable than a confident guess.

  PKR-002: decisions are made based on the site, not the overall size

  The dimensions 415 × 355 × 225 mm help understand the scale of the carved shelf on the wall, but do not answer the buyer's main question: whether a specific vase will fit on the horizontal surface.

  Before ordering, you need to match four things:

  • the shape and size of the item's base;
  • the exact contour of the usable area;
  • the confirmed load;
  • the mounting scheme for a specific wall.

  After that, choose beech or oak, agree on the finish, and include PKR-002 in the overall composition.

  STAVROS offers not only a separate carved shelf, but also the ability to assemble a connected system: choose a frame, console, wall decor, material, and finish. This approach is especially important for custom-made items. The buyer gets not a random beautiful detail, but a shelf that fits the item, wall, and interior according to verifiable parameters.

  Open the product card, prepare the base dimensions, and request a technical view of the platform. If PKR-002 fits — place your order. If not — compare other carved shelves from STAVROS and choose a model that will actually hold your item, not just look suitable in a photo.