Buy MDF mirror frame: RM-035 700 mm, RM-033 800 mm or RM-028 900 mm — which size to choose

Comparison of three art deco frames by wall scale, furniture, and future mirror panel

MDF Mirror Frame RM-033

from 305.22 $

MDF Mirror Frame RM-028

from 221.53 $

Go to Catalog

RM-035, RM-033 or RM-028: short answer

RM-035 is worth buying when you need a compact square MDF frame for a small partition, narrow console, dressing table, or small hallway. The confirmed model size is 700 × 700 × 75 × 37 mm. RM-033 with a nominal size of 800 mm suits a medium-scale interior: it is more noticeable than RM-035, but does not take up as much wall space as the large RM-028. RM-028 with a size of 900 mm is chosen for a wide console, large dresser, spacious hall, or living room where the mirror should be the main accent. The nominal 700, 800, and 900 mm cannot automatically be considered the size of the mirror panel. For RM-033 and RM-028, it is especially important to check the full external dimension, light opening, technical dimensions, and configuration in the product card or DWG before ordering.

Buy RM-035 MDF frame Buy RM-033 MDF frame Buy RM-028 MDF frame to buy a mirror frame Order selection of frame and furniture size

RM-035 — compact square frame 700 mm. Full confirmed table A × B × D × E: 700 × 700 × 75 × 37 mm; material — MDF; finish — "Prestige".

RM-033 — medium frame nominal size 800 mm. Full dimensions, light opening, profile, depth and mirror installation option must be checked in the card or DWG.

RM-028 — large frame nominal size 900 mm. Overall dimension, mounting seat, thickness, weight and configuration cannot be determined only by nominal value.

All three models are made of MDF and belong to the Art Deco style. They are chosen for enamel and coordinated interior finish, not for transparent tinting like solid oak.

Mirror panel cannot be considered automatically included. The presence of a mirror, fasteners, back panel, and hangers is checked in each card before purchase.

The mounting is calculated based on the total weight of the frame and mirror, wall type, and number of hanging points. The universal "one hook for any model" scheme is unsafe without technical data.

It is easier to buy a frame for a mirror after the buyer sees the actual outer contour on the wall, not just a photo in the catalog. The difference between 700, 800, and 900 mm seems small in the table: each next option is only 100 mm larger. But on the wall, an extra ten centimeters changes the free space, distance to the sconce, width of the mirror surface, proportion relative to the console, and the difficulty of bringing it in.

RM-035, RM-033, and RM-028 belong to the same stylistic group, so the choice is primarily based on scale. A compact frame can get lost over a wide dresser. A large one can overwhelm a narrow wall space and end up too close to pilasters, door trim, or light fixtures. A medium size is convenient not because it is universal, but because it often becomes a connecting option between small furniture and an empty wall.

There is also a technical fork. The outer size of the frame is not equal to the clear opening, and certainly not equal to the size of the mirror surface. The decorative profile takes up part of the dimension, and the mirror can be installed from the back into a designated seat. Until the full drawing is opened, you cannot order glass based on the number 700, 800, or 900 mm.

For a small composition, you can choose a square frame 700 × 700 mm. For a medium scale — a frame for a mirror size 800 mmFor a free wall — a large frame for a mirror 900 mm. If no dimension fits, it's better to view all sizes and materialsthan to try to fit the mirror or furniture to a random option.

Watch video ...

What does the nominal size 700, 800, or 900 mm mean

The nominal size helps quickly compare the scale of models, but does not replace the technical table. For RM-035, the parameters A × B × D × E 700 × 700 × 75 × 37 mm are confirmed. The first two values show the square external dimension. The purpose of D and E must be read according to the card diagram, without turning one number into profile width, depth, or mirror seating without manufacturer markings.

Our factory also produces:

Relief decoration NPU-276

from 56.12 $

Decor Set C-020

from 395.49 $

Decor Set C-010-1-1L

from 369.02 $

Decor Set C-026

from 131.63 $

Wooden Decor N-253L

from 61.60 $

Molding D1020 polystyrene HIWOOD 20mm x 7.5mm x 2.0m.

from 3.54 $

Molding W1060 polystyrene HIWOOD 60mm x 9mm x 2.0m.

from 7.08 $

Partition set KON-003

from 587.87 $

View Full Product Catalog

External dimension

This is the size the frame occupies on the wall. It is needed for a paper template, checking the wall section, distance to furniture, sconces, and architectural elements.

Light opening

This is the visible area of the mirror inside the decorative frame. It always requires separate confirmation. The assumed profile width cannot be subtracted from the external size by eye: the pattern and fit may be more complex.

Mirror seating size

The mirror panel should normally fit into the designated area on the back side, but the specific construction of the three frames in the SEO scheme is not fully disclosed. The glass size is ordered according to DWG, product table, or manufacturer data.

Technical depth

It affects the offset from the wall, placement of the mirror, back panel, and mounting. For RM-033 and RM-028, this parameter needs to be checked, not transferred from RM-035.

The nominal value does not describe the mirror shape

RM-035 is confirmed as square in external dimensions. The shape of RM-033 and RM-028 cannot be declared round, oval, or square based solely on the numbers 800 and 900 mm. It is checked in the card and drawing.

Confirmed characteristics of the three frames

The table helps separate fact from assumption. The material and nominal dimensions of three models are confirmed. The full size chart is known only for RM-035. Therefore, the article compares the actual visual scale but does not replace the drawings of RM-033 and RM-028 with guesses.

RM-035, RM-033, and RM-028: direct comparison by scale

RM-035 size 700 × 700 mm

RM-035 — единственная из трёх моделей, для которой в SEO-схеме подтверждена полная таблица A × B × D × E: 700 × 700 × 75 × 37 мм. Рама выполнена из МДФ, имеет качество обработки «Престиж», квадратный внешний габарит и рисунок из скрученных линий в стилистике современного ар-деко.

Почему 700 мм удобно для небольшой стены

Компактный внешний габарит проще разместить между дверным наличником, углом, шкафом и бра. Он оставляет больше свободного поля и не превращает зеркало в единственный доминирующий объект маленькой прихожей.

Над узкой консолью

RM-035 легче связать с мебелью небольшого масштаба. На сайте можно посмотреть интерьер с рамой RM-035 и оценить принцип сочетания с мебельными ножками. Размеры своей консоли всё равно нужно проверять отдельно.

Для туалетного столика

Квадратная рама создаёт понятный центр над столешницей. Но удобство зависит не только от внешних 700 мм: нужен достаточный световой проём и правильная высота установки для сидящего пользователя.

Для небольшой спальни

RM-035 can function as a decorative mirror above a chest of drawers or a vanity table. If the furniture is significantly wider, the frame will become a local focal point rather than repeating the entire horizontal line.

For a repeating composition

Several identical frames can be used in a hotel corridor, salon, or showroom. The compact size is easier to repeat, but each node still requires reliable fastening and consistent finishing.

Commercial choice

For a small wall section, you can Buy RM-035 MDF frame or view the specifications of RM-035 before ordering the mirror panel.

RM-033 with a nominal size of 800 mm

RM-033 occupies a middle position between 700 and 900 mm. This scale is useful when RM-035 looks too compact and RM-028 takes up an excessive portion of the wall. However, the medium size cannot be automatically considered suitable for any room.

Which is confirmed

The frame is made of MDF, belongs to the Art Deco style, and is presented as a separate card with a nominal size of 800 mm. There is also a ready-made interior solution with furniture legs MN-110.

What to check

Before ordering, the full size A × B × D × E, exact shape, light opening, decorative profile width, depth, mirror fit, processing quality, available finish and configuration are required. The nominal value of 800 mm cannot be used as the glass size.

Above a chest of drawers

The middle frame is often proportional to furniture of standard width. It is more noticeable than RM-035, but retains more air around it than RM-028. An accurate conclusion is given by the 800 mm template on the wall.

For the hallway

RM-033 is suitable if the wall section is wider than compact and the mirror should be more functional. It is necessary to check whether sconces, switches and door openings interfere.

For modern classic

The medium scale is conveniently combined with a laconic console and a richer art deco pattern. You can see the combination of RM-033 and furniture legs MN-110, to evaluate the configuration principle.

Commercial choice

For a medium-sized wall, you can Buy RM-033 MDF frame и see the dimensions of RM-033 directly in the card.

RM-028 nominal size 900 mm

RM-028 is the largest comparison option. The nominal 900 mm makes the frame a noticeable architectural accent. It suits a large wall, wide furniture, and a space where the mirror is viewed from a distance. In a small hallway, the same scale can overwhelm other details.

Which is confirmed

The model is made of MDF, belongs to Art Deco, and has a nominal size of 900 mm. It is presented as a separate card and within the collection, but the article uses the main product URL and confirmed data.

What needs clarification

You need to open the full drawing and check the external dimension, clear opening size, thickness, profile width, pattern geometry, mirror installation method, allowed orientation, weight, and configuration.

Above a wide console

RM-028 can become the main center of the composition. Furniture should support its scale. A narrow console under a large frame sometimes looks random and visually unstable.

In the living room and hall

On a free wall, the large frame is readable from the other end of the room. Space must be left around it, otherwise the Art Deco pattern will blend with moldings, sconces, and neighboring objects.

In a commercial interior

RM-028 can decorate the wall of a reception area, salon, restaurant, or hotel lobby. For frequent use, the finish, safe mirror, mounting, and maintenance capability are especially important.

Commercial choice

For a large wall, you can Buy RM-028 MDF frame и view specifications for RM-028 before ordering glass and fasteners.

How noticeable is the difference of 100 mm

Between adjacent nominal sizes there is only 100 mm, but the increase is distributed across the entire composition. If the shape is close to symmetrical, the outer contour increases by approximately 50 mm on each side relative to the center. This affects the field around the frame, but the exact distribution depends on the actual shape of RM-033 and RM-028.

RM-035 vs RM-033

The middle option may come closer to the sconce, furniture edge, or trim by an additional few centimeters on each side. On a narrow wall, this is critical.

RM-033 vs RM-028

A large frame requires wider furniture and more empty space. In a spacious room, the difference makes the composition more expressive; in a small one, it feels more cramped.

RM-035 vs RM-028

The difference in nominal values is 200 mm. This is a different scale: a local square accent turns into a large framing, noticeable from a distance.

Profile width may vary

You cannot assume that all the increase went into the light opening. Different models have different patterns, so the decorative part may also increase. Full drawings are mandatory.

Color enhances or softens the scale

A contrasting black frame looks larger than a white one matching the wall. But painting does not fix a physically unsuitable dimension.

How to make three full-size templates

A paper template helps to see the external dimension before purchase. For RM-035, a 700 × 700 mm square is sufficient. For RM-033 and RM-028, at the first stage, you can mark a conditional outline of 800 and 900 mm, but after receiving the DWG, it must be replaced with the exact shape. The template does not show the light opening and profile, but it immediately reveals conflicts with the wall and furniture.

Check the print scale

When printing in parts, disable the "fit to page" function. Add a control line of known length and measure it with a regular tape measure. Otherwise, the template will shrink, and the frame after delivery will be larger than expected.

Mark the outer contour

For choosing a location, the frame's dimension on the wall is important. The light opening can be drawn as a second contour only after the technical scheme is confirmed.

Add the axis and hanging height

Vertical and horizontal lines are drawn on the template. They help align the frame with the center of the console, dresser, vanity table, or wall section.

Mark the sconces and switches

If lighting fixtures are planned on the sides, indicate their actual size and projection. There should be space between the sconce body and the frame relief for installation and maintenance.

Compare with furniture at real scale

Place the console or mark its width with painter's tape. One template on an empty wall may seem appropriate, but the proportion will change above furniture.

Look from different angles

Evaluate the composition from the entrance door, from the center of the room, from the side, and in the mirror reflection of adjacent surfaces. RM-028 must be convincing not only up close.

Leave the templates for several days

Getting used to it helps distinguish the real scale from the first emotional impression. If 900 mm consistently feels heavy, finishing in the wall color will only partially soften the effect.

How to choose a frame based on wall width

It is impossible to set a universal rule that the frame should occupy a certain percentage of the wall. The wall space may be limited by architraves, pilasters, curtains, sconces, furniture, and passages. Therefore, the usable field is measured, not the entire wall from corner to corner.

Narrow pier

RM-035 is more suitable because it leaves more air. But even 700 mm may not fit between the door and the cabinet. The protruding profile and access to the switch must be considered.

Average free zone

RM-033 helps make the mirror noticeable without dominating. It suits the bedroom, hallway, and living room if the furniture underneath has a comparable scale.

Large wall

RM-028 creates the main center. To prevent the frame from looking random, a free field is left around it, and the adjacent decor is subordinated to a common axis.

High ceiling

A large size better maintains the vertical, but the nominal 900 mm does not guarantee the required composition height. The frame shape, furniture position, and distance to the ceiling cornice are important.

Wall with moldings

The frame must fit inside the prepared panel or deliberately intersect its composition. Moldings cannot be installed first, and then the size chosen based on the remaining random window.

How to choose a frame for a console

The frame and console form a single interior unit. The buyer sees them simultaneously, so the mirror size should support the width of the tabletop, the shape of the legs, and the decorative richness of the furniture. There is no strict rule that "the frame is always narrower than the console," but a large frame above a narrow support requires a particularly convincing composition.

RM-035 above a compact console

This is the most manageable option for a small hallway or bedroom. A 700 mm square creates a center, leaving room for sconces and decorative items on the tabletop.

RM-033 above a medium-sized console

An 800 mm frame becomes more noticeable and can better support furniture with a wider front. Before ordering, you need to check the full dimensions and the distance to the light fixtures.

RM-028 above a wide console

A large frame suits furniture that does not get lost under a 900 mm accent. There should be enough wall space around the mirror, and the console should not be overloaded with tall decor.

Central axis

If the project is symmetrical, the center of the frame coincides with the center of the tabletop and the furniture frame. Asymmetry is possible but must be related to a sconce, painting, or another part of the composition.

Decorative items

Tall lamps and vases can block the reflection or relief. They are considered at the paper template stage, not after the mirror is installed.

Ready-made solutions

To find proportions, you can select a frame, console, and furniture legs, and then apply the principle to the actual dimensions of your wall.

How to choose a frame for a dresser

Compact chest of drawers

RM-035 creates a neat center and doesn't take up the entire wall width. It suits a bedroom and a small hallway.

Medium-sized dresser

RM-033 often looks more proportional because it occupies an intermediate scale. But the full shape and light opening must be confirmed.

Wide chest of drawers

RM-028 can support the horizontal line of the furniture and create a noticeable mirror. If the dresser is low, it's especially important to check the overall height of the composition.

Frame narrower than furniture

This is a common and calm scheme. Space remains on the sides for table lamps or decor. But the light opening must be sufficient for the actual function of the mirror.

The frame is close to the width of the furniture

The composition becomes stronger and more monumental. This option suits a large wall and requires precise centering.

The frame is wider than the furniture

Allowed only per project. Visually, the top may appear heavier than the base, especially for RM-028. A full-size template is mandatory.

Choice for a small hallway

In the hallway, the mirror, door, wardrobe, console, switches, and passage all work simultaneously. Therefore, compactness is more important than the desire to get the maximum reflective surface. RM-035 more often fits a limited wall space, while RM-033 is considered after fitting.

Mirror near the entrance door

The frame should not fall under the open door leaf, handle, or clothes on the hanger. Check not only the closed position of the door.

Above a narrow shoe cabinet

RM-035 can be proportional if the furniture has sufficient width. RM-028 above a small shoe cabinet almost always requires strong architectural justification.

In the dark zone

A mirror helps distribute light, but a large dark profile can visually reduce space. White or wall-matching enamel softens RM-033 and RM-028 without changing their physical size.

Functional height

The light opening should reflect the user, not just the opposite wall. The hanging height is determined after obtaining precise internal dimensions.

Choice for bedroom

Above a chest of drawers

RM-033 suits medium scale, RM-035 suits compact, RM-028 suits a large free wall. The bed, wardrobe, and curtains should not compete with the Art Deco pattern.

Above a vanity table

RM-035 is convenient for a seated scenario. RM-033 provides a more noticeable composition. RM-028 requires a wide countertop and sufficient distance from light fixtures.

Opposite the bed

The mirror becomes a strong visual object. The buyer should check in advance which areas of the room will be reflected and whether the large RM-028 creates an excessive accent.

Next to the dressing room

A sufficient light opening is needed to assess the image. The nominal external size does not guarantee functionality, so the internal geometry is clarified first.

Choice for living room and hall

Local accent RM-035

Suitable for a small pier between windows, an area above a console, or a repeating composition. On a huge wall, a single frame may get lost.

Medium accent RM-033

Convenient above a chest of drawers, fireplace console, or in a passage area. The medium size connects furniture and wall without mandatory dominance.

Main accent RM-028

A large frame suits a grand hall, living room, and high wall. Its pattern should be visible from afar, and the free space should not be cluttered with many paintings and shelves.

Two sconces

Lights are placed symmetrically only after checking the actual width of the frame. Their bodies, shades, and shadows must not overlap the profile.

Architecture reflection

A large mirror can reflect a staircase, window, chandelier, or door portal. This is part of the composition, so the frame is placed not only in the center of the furniture but also considering the reflected view.

Choice for hotel, restaurant, salon, and showroom

Repeat of RM-035

Compact frames are convenient to use in multiple rooms, a corridor, or a fitting area. For a series, identical enamel, batch marking, and a repair stock are important.

RM-033 in a hotel room

A medium size can combine decorativeness and functional mirror area. The overall dimensions and installation method must be checked before furniture manufacturing.

RM-028 in the reception area

A large frame creates a recognizable background but requires professional calculation of the wall and mirror. In a walk-through area, safe installation and protection from accidental contact are especially important.

Beauty salon

Mirror functionality comes to the forefront. Light opening, lighting, height, and reflection quality are more important than a single external size.

Restaurant and lobby

The frame can serve as a decorative accent, reflecting light and the interior. The surface under the enamel must be designed for regular cleaning and local repairs.

For stylistic cohesion, you can look at the decor of the art deco collection and select adjacent furniture pieces without accidentally mixing motifs.

Frame or ready-made mirror: what exactly the customer is buying

A frame card and a ready-made mirror card are different product scenarios. The comparison in question refers to decorative MDF frames. It cannot be automatically guaranteed that the mirror glass, backing, mounting hardware, and hangers are included. These items are checked for each model before payment.

When a frame is needed

The buyer wants to order the mirror themselves, choose its thickness, edge treatment, and protective film, or entrust assembly to a specialized workshop. The frame becomes the decorative part of a custom set.

When a ready-made mirror is more convenient

If you don't want to calculate the glass, seating, and suspension separately, consider the confirmed category of ready-made mirrors. However, links to specific ready-made models are not provided in the SEO scheme, so the article does not offer a random product.

Why you cannot cut a mirror to the external size

The decorative profile takes up part of the dimension, and the panel is installed on the reverse side. A mirror measuring 700 × 700 mm may not fit into RM-035 or may cover the mounting elements if these numbers refer to the external frame.

Who is responsible for assembly

A glass workshop, furniture manufacturer, or installation company must receive an accurate DWG. Installing a large mirror without professional inspection increases the risk of damage to the frame and glass.

Before choosing, it is useful to read, how to choose a wall mirror in a frame, and then return to the technical cards RM-035, RM-033, or RM-028.

How to order a mirror panel

Get the mounting size

It is not the external or just the light size that is needed, but the geometry of the zone where the glass is installed. It may include a quarter, stops, fasteners, and a technological gap.

Specify the shape

For RM-035, the square external contour is confirmed, but the shape of the mirror sheet must still be taken from the drawing. For RM-033 and RM-028, the shape cannot be guessed from the nominal size.

Agree on the glass thickness

The SEO scheme does not specify a specific thickness. It is determined by a specialist taking into account size, weight, installation method, and safety requirements.

Check the edge processing

Even a hidden edge must comply with the installation technology. You cannot order arbitrary processing if it changes the size or fit.

Consider protective film

For a large mirror, it may be part of a safe solution, but the specific need and type are determined by a specialist. The article does not guarantee its inclusion in the kit.

Provide the workshop with the frame or an accurate drawing

The most reliable option is a physical fitting or working according to an official scheme. Measuring the finished painted frame with a ruler should be done by a responsible person to avoid damaging the profile.

External, light, and mounting dimensions

The external dimension is responsible for the wall

It shows whether the frame will fit between sconces, moldings, furniture, and the door. It is used for the first paper template.

The light dimension is responsible for the reflection

It shows the visible part of the mirror after assembly. It is important for the buyer to assess whether this area is sufficient for a hallway, vanity table, or salon.

The mounting dimension is responsible for glass manufacturing

It determines the actual mirror and the technological gap. Ordering glass based on the light opening is also not allowed: the panel usually must extend behind the decorative profile.

The profile width links the three dimensions

The wider the decorative border, the smaller the light opening with the same external dimension. For three models, the pattern may differ, so simple arithmetic based on 700, 800, and 900 mm is unreliable.

Depth is responsible for assembly

It affects the placement of glass, back panel, fasteners, and the gap from the wall. For RM-033 and RM-028, this parameter must be confirmed separately.

How to check the seating area for the mirror

Before painting, the frame is inspected from the back side. The evenness of the seating contour, the presence of provided stops, and access for fastening are checked. Any mechanical modification must be approved because MDF and decorative profile can be damaged.

Do not measure only one side

Even a square outer contour does not guarantee the same seating size at all points if the pattern is complex. Several control sections are measured.

Check the diagonals

For a rectangular or square seating area, diagonals help identify misalignment. But the final size is still set by the technical documentation.

Consider the enamel layer

The coating may slightly change the fit at the ends. Therefore, the finishing technology and mirror size are coordinated with each other, not independently.

Do not press the glass with the decorative profile

The mirror should not create tension in the frame. The fixing method is chosen so that the glass is held securely and does not damage the MDF.

Provide for serviceability

If the mirror can be removed for repair or replacement, the fasteners must remain accessible. Blind random gluing complicates maintenance and may damage the frame.

How to calculate the total weight of the composition

The exact weight of RM-035, RM-033, and RM-028 is not given in the SEO scheme. Therefore, fasteners cannot be assigned by size alone. For calculation, add the weight of the frame, mirror panel, back panel, hangers, and other

Wall type

Concrete, solid brick, hollow block, drywall, and wooden blocking require different solutions. The same dowel cannot be assigned to all surfaces.

MDF under enamel: advantages and limitations

All three frames are made of MDF. The material allows for precise relief and a smooth surface for opaque finishing. It should not be described as solid oak or beech and tinted with the expectation of natural wood grain.

Even color

Enamel unites the complex pattern and allows you to connect the frame with the wall, furniture facades, doors or console legs. The result depends on the primer, preparation and quality of application.

Precise decorative relief

Twisted lines RM-035 and the pattern of other models are read due to light and shadow. Too thick a layer can smooth out small boundaries.

Sensitivity of end faces

End sections of MDF require particularly careful preparation. If they absorb primer unevenly, the gloss and color will differ from the front plane.

Moisture Protection

The article does not call the frames moisture-resistant and does not recommend them for the bathroom without confirmed coating and operating conditions. Regular interior enamel is not an automatic guarantee for a wet area.

Repairability

A small chip can be restored using the saved technological map and control swatch. Random paint of a different gloss will be noticeable on the relief.

Before finishing, it is useful to learn about MDF and surface preparation for enamel.

How to paint a carved MDF frame without losing relief

Inspect the product down to the base

Dust, damage, and unevenness are easier to fix before finishing. For RM-035, Prestige quality is confirmed, but this does not cancel incoming inspection.

Make a test application

A flat sample does not show how enamel behaves in twisted lines and recesses. It is better to use a compatible fragment or one control zone according to the agreed technology.

Apply thin, even layers

Material buildup in recesses reduces pattern clarity. The number of layers and interlayer treatment depend on the system.

Check under side lighting

It reveals runs, missed spots, and varying gloss. Black and semi-gloss enamel are especially demanding on surface quality.

Protect the mirror seating area

The coating must not interfere with the installation of glass, hangers, and back panel. Which areas to mask are determined by the DWG.

Paint the reverse side according to the technology

You cannot automatically leave it unfinished or cover it the same way as the facade. The correct scheme depends on the design, finish, and installation method.

General techniques can be checked on the page recommendations for painting and installing frames.

White, dark, or contrasting finish

White frame

Softens the scale and connects with the light wall, doors, and furniture. On RM-028, white reduces visual heaviness but does not solve the problem of a narrow wall space.

Black frame

Emphasizes Art Deco lines and makes the framing a strong graphic accent. RM-035 looks more cohesive, RM-028 appears significantly more massive.

Greige and complex neutral shades

Help connect warm and cool materials in the room. For an accurate result, a physical swatch next to the furniture and wall is needed.

Frame in the color of the wall

The relief is read through the shadow, and the external dimension is perceived more calmly. This is useful if a large size is chosen, but you want to maintain lightness.

Contrast with furniture

The frame can match the color of the legs or handles, not the facade. Useful for ready-made combinations select a frame, console, and furniture legs.

Matte or semi-gloss enamel

A matte surface is calmer and emphasizes small defects less. Semi-gloss enhances relief and light reflection but requires a smoother preparation. The specific finish is chosen based on a sample.

How to coordinate the frame with furniture legs and a console

An Art Deco composition becomes convincing when the frame, console, and furniture legs are connected in scale, rhythm of lines, and finish. The buyer does not necessarily have to match all details in one color, but each should support the overall logic. A large RM-028 above a light console on thin legs may look heavier than the furniture, while a compact RM-035 may get lost above a massive base.

Repeat not the form, but the character

Twisted lines of the frame do not necessarily have to be duplicated in each leg. It is enough to coordinate the geometry, degree of decorativeness, and visual mass. Literal repetition of all motifs often overloads the furniture.

One color for the frame and legs

This technique brings the set together and helps different parts look like a single object. MDF frames and leg material can behave differently under enamel, so a unified color swatch and consistent gloss level are needed.

Contrast frame

A black or dark frame above a light console can complement handles, lights, and interior graphics. The larger the RM-028, the stronger the contrast.

Ready solution RM-035

On the solution page you can select furniture legs for the frame and see how the compact framing works with the furniture base.

Ready solution RM-033

The pairing with MN-110 helps assess the medium scale. It does not replace wall measurements, but shows a commercial path from a single frame to a finished composition.

How to check the delivery route

A dimension of 700, 800, or 900 mm needs to be carried from the unloading point to the wall. If the mirror is installed in advance, the weight and fragility of the set increase. A frame without glass also cannot be carried by the thin decorative profile.

Car and packaging

Check the internal size of the luggage compartment, the door opening, and the possibility of placing the product without pressure on the relief. Rigid packaging may be larger than the nominal dimension.

Entrance and front door

Measure the clear opening, handles, door closers, and swing. RM-028 is especially important to check for diagonal carry.

Stairs

On the landing, a large frame may not be able to turn. You need to consider railings, ceiling height, and packaging. It is better to transport and lift glass using a method agreed upon with specialists.

Elevator

The door, cabin depth, and diagonal matter. The phrase "large elevator" does not replace measurements.

Last turn in the room

Often the product goes through the front door but cannot turn between the wardrobe, bed, and wall. The route is cleared in advance.

Inspection after delivery

The frame is inspected in good light before painting or installation. The finished enamel is checked for chips and scratches. The mirror is inspected separately according to the rules of the glass workshop.

Terms for receiving a large product can be clarified on the page terms of payment and delivery for a large frame.

How to secure a frame with a mirror

The mounting is calculated after determining the total weight and wall type. It cannot be guaranteed that RM-035, RM-033, or RM-028 can be hung on a single hook. Even a compact model becomes a separate heavy system after the mirror is installed.

Concrete and solid brick

Fasteners are selected based on the calculated load, hole diameter, and base condition. A random dowel from a household set is not a universal solution.

Hollow block

A system designed for the specific void and weight is needed. The attachment point must not fall into a weak area without verification.

Drywall

A large frame with a mirror should preferably be tied to embedded elements or the wall frame as per the design. A single attachment only to the sheet without calculation is risky.

Two or more points

Multiple points help distribute weight and maintain level, but their number and placement depend on the frame's hangers. Do not drill new holes in MDF without approval.

Marking

First, find the central axis of the furniture and wall, then transfer the actual hanging points. A laser level helps check level but does not correct incorrect center-to-center dimensions.

Installing the mirror before or after hanging

The order depends on the frame design, glass weight, and access to fasteners. For RM-028, a specialist must decide. A universal sequence in the SEO scheme is not confirmed.

Enamel protection

Tools and hands must not press on the decorative profile. Hold the frame by designated safe zones, and remove soft protection only after final fixation.

Storage and care

Before installation

Store the frame in a stable position according to manufacturer recommendations, not leaning on thin decorative protrusions. Do not place heavy boxes on it or tighten packing straps without protection.

After painting

The enamel must fully undergo the intended drying and curing cycle. Early installation increases the risk of marks from hands, packaging, and fasteners.

Frame care

Dust is removed with a soft dry or slightly damp cloth compatible with the finish. Abrasives and aggressive compounds may alter the gloss and damage the edges of the relief.

Mirror care

Liquid should not run behind the panel or come into contact with MDF or fasteners. Apply the product to a cloth if this aligns with the mirror's recommendations.

Chip repair

Keep the color code, primer, enamel, and test patch. Perform local repairs carefully to avoid creating a spot with different gloss.

General rules can be checked in the section mirror and painted frame care rules.

What to buy with the frame

The main additional purchase is a mirror sheet calculated to the mounting size. However, the SEO scheme does not have a confirmed card for a specific mirror or mounting kit, so the article does not create fictitious links. Instead, the buyer receives a route to frame categories, ready-made interior solutions, a collection, and selection services.

How not to confuse these frames with similar products

MDF frame and solid wood frame

RM-035, RM-033 and RM-028 are made of MDF. They cannot be described as oak, beech, or made of natural solid wood. A transparent wood texture requires a different category.

Frame and finished mirror

A separate frame does not guarantee the presence of a mirror sheet. Completeness is checked before ordering.

Nominal size and glass size

700, 800 or 900 mm cannot be given to the glazier as the finished mirror size. A mounting diagram is required.

Interior frame and photo frame

These models are designed for a mirror interior composition. They are not optimized for photographs, paintings, or self-adhesive edging.

RM-035 and RM-040

If 700 mm is too large, you can view the compact frame RM-040 600 mm. It cannot be considered a reduced copy of RM-035 without comparing the pattern and drawing.

RM-028 and RM-044

For another large geometric character, you can view the large geometric frame RM-044. Its dimensions and shape are checked separately.

Other comparisons of MDF frames

For a buyer choosing between smaller and larger geometric decor, the material will help RM-040 or RM-044 — choose a compact or large frame.

Practical choice for specific situations

Need a mirror in a small hallway

Start with RM-035. Make a square template 700 × 700 mm, place a furniture outline under it, and check the door opening. If the light opening turns out to be too small, consider RM-033 after receiving the full drawing.

Need a mirror above a wide dresser

RM-033 usually corresponds to a medium scale, RM-028 to a large one. It is important not only to visually fill the wall but also to leave space for lamps and decor on the dresser.

Need a mirror for a vanity table

RM-035 is convenient for a compact table, RM-033 for a wider one. First check the seated user's height and the light opening, then the external size.

Need a main mirror in the living room

RM-028 better holds a large wall. But it should only be chosen if there is a free field, suitable furniture, and a safe delivery route.

Need several identical mirrors for a hotel

RM-035 is more convenient to repeat in rooms and corridors. RM-033 is suitable for more spacious rooms. All frames are painted in one batch and marked by installation locations.

Need a mirror in a beauty salon

The main parameter is the light size and working height. A nominal value of 900 mm does not guarantee sufficient reflective area if the profile is wide. Request DWG.

The frame needs to be coordinated with the black furniture legs.

Black enamel can tie the frame and base together, but it enhances the relief and scale. RM-028 in this finish becomes particularly dominant.

The frame needs to be blended with the wall as much as possible.

Choose an enamel of a close shade and a matte or other agreed finish. The relief will remain visible due to the shadow, and the outer contour will be calmer.

The old frame needs to be replaced while preserving the mirror.

Check the shape and seating size of the existing glass. Matching the external dimensions of the new model does not guarantee that the old mirror will fit into it.

A large frame needs to be hung on drywall.

First, find the embedded elements or the frame and calculate the total weight. Buying RM-028 before checking the wall is risky.

Mistakes when choosing the frame size

Choosing only by photo

On screen, all three models can occupy the same area. The photo does not show that RM-028 is 200 mm larger than RM-035 in nominal size.

Consider 800 mm as a universal compromise

RM-033 may still be too large for a narrow wall or too small for a grand wall. The average number does not replace a mockup.

Equating external size to the mirror

This leads to incorrect glass ordering. The seating size from DWG is needed.

Do not account for furniture

A frame on an empty wall may look appropriate, but after installing a console, it may appear too large or too small. The template is checked together with furniture.

Do not leave empty space

Art Deco relief requires breathing room. A frame pressed against the trim, sconce, and cornice looks cramped and complicates installation.

Order the mirror before confirming the frame

Even a small error in installation makes the glass unusable. First, obtain the exact layout and actual frame, then finish the mirror.

Ignore the total weight

MDF, mirror, back panel, and hardware create a load on the wall. Size alone does not determine the fasteners.

Consider the mirror as part of the kit without verification

The buyer may receive only the frame and discover the need for a separate glass order. The configuration is clarified before payment.

Paint without a test swatch

Too thick enamel smooths out the relief, while incorrect gloss highlights defects. A test is especially important for black and semi-gloss coatings.

Do not check the delivery route

RM-028 may not fit through an elevator or stairway turn when packaged. Measurements are taken in advance.

Who RM-035 is suitable for

• a small hallway and compact partition;
• narrow console or vanity table;
• square composition 700 × 700 mm;
• bedroom and boudoir area;
• repeating mirrors in a hotel or salon;
• interior where sconces and moldings are placed close together;
• project with enamel in the color of the wall or furniture;
• buyer for whom large 800–900 mm seem heavy;
• local art deco accent;
• composition with furniture legs MN-184 or MN-189 based on a ready-made solution.

When RM-035 is better not to choose

• the frame should dominate on a large wall;
• a maximally large light opening is needed;
• the chest of drawers and console are significantly wider, and the small center gets lost;
• the outer 700 mm do not fit between architectural elements;
• the seating of the existing mirror does not match the drawing;
• the buyer is looking for a frame made of solid wood.

Who is RM-033 suitable for

• a medium-sized wall;
• a chest of drawers or console of ordinary scale;
• hallway, bedroom and living room;
• to the hotel room;
• modern classic and art deco;
• to the buyer for whom 700 mm is too little and 900 mm is too much;
• compositions with MN-110 furniture legs;
• to the frame for white, dark, or neutral enamel;
• to the mirror that should be noticeable but not dominant;
• to the project with mandatory full DWG check.

When it's better not to choose RM-033

• full dimensions and light opening are not confirmed;
• the wall section is too narrow for 800 mm;
• a large wall requires a stronger scale;
• the existing mirror is ordered at face value without a mounting diagram;
• the wall is not designed to support the total weight of the set;
• the customer perceives the medium size as universal without a layout.

Who is RM-028 suitable for

• a wide console or a large dresser;
• a spacious living room and a grand hallway;
• a wall with a high ceiling;
• a reception area, restaurant, salon, and showroom;
• a mirror that should become the main focal point;
• interior with sufficient free space;
• large art deco decor;
• project with professional mounting calculation;
• delivery route verified before ordering;
• customer for whom RM-035 and RM-033 seem insufficiently expressive.

When it's better not to choose RM-028

• the wall section is narrow or occupied by sconces and trims;
• the console is noticeably smaller than the frame and does not support its scale;
• overall dimensions, light opening size, and weight are not confirmed;
• the drywall wall does not have calculated embedded supports;
• the packaging does not fit through the door, elevator, or staircase;
• the customer needs a small functional mirror for a narrow hallway.

What to Check Before Ordering

• article RM-035, RM-033, or RM-028;
• nominal and full external dimensions;
• exact frame shape;
• light opening;
• mirror mounting size;
• technical depth and width of the profile;
• MDF material;
• surface preparation quality;
• color and gloss level of enamel;
• whether the mirror is included in the set;
• presence of back panel, hangers, and fasteners;
• weight of the frame and future mirror;
• wall type and embedded elements;
• number and location of mounting points;
• width of the console, dresser, or vanity table;
• full-size template on the wall;
• distance to sconces, moldings, and trims;
• delivery route and package size;
• Delivery and inspection conditions;
• Possibility of subsequent removal of the mirror for repair.

How to buy RM-035, RM-033 or RM-028 on STAVROS

Start with three templates of 700, 800 and 900 mm. Apply them to the wall, add furniture outline, sconces and free fields. For a compact option, open the card and buy the RM-035 frame made of MDF after checking the size 700 × 700 × 75 × 37 mm.

If RM-035 seems small, proceed to decorative framing of the 800 mm mirror. Before ordering, request the full drawing, light opening and configuration. The average nominal value should not replace technical data.

For a large wall, open edging for a large mirror. It makes sense to buy RM-028 after checking the delivery route, mirror weight, wall, and furniture under the composition.

For a general selection, you can study the dimensions and choice of frame for the interior or see how to choose a wooden, carved, or baguette frame. If the composition is complex, it is reasonable Order selection of frame and furniture size.

FAQ: questions about RM-035, RM-033, and RM-028

How is RM-035 different from RM-033?

RM-035 has a confirmed external size of 700 × 700 mm and a compact scale. RM-033 belongs to the medium nominal size of 800 mm. The full parameters of RM-033 need to be checked in the card or DWG.

How is RM-033 different from RM-028?

The nominal difference is 100 mm: RM-033 — 800 mm, RM-028 — 900 mm. The large RM-028 requires a wider wall, furniture, and careful calculation of the mounting.

What is the full size of RM-035?

Confirmed table A × B × D × E — 700 × 700 × 75 × 37 mm. Each technical parameter value should be read according to the card diagram.

What does the size RM-033 800 mm mean?

This is the confirmed nominal size of the product. It cannot be automatically considered as the diameter, mirror side, or light opening.

What does the size RM-028 900 mm mean?

This is the nominal size of the large frame. The full external dimension, shape, light opening, profile, and depth should be clarified from the card or DWG.

How to find out the light size of the frame?

Open the technical table or drawing. Calculating it from the external dimension and assumed profile width is unreliable.

Is the mirror sheet included in the kit?

In the SEO scheme, the configuration is not confirmed. The presence of a mirror, back panel, hangers, and fasteners should be checked in the specific model card.

Can I order the mirror separately?

Yes, if the exact mounting size is obtained and the frame design is confirmed. It is better to entrust the manufacturing to a glass workshop.

What size mirror is needed for RM-035?

Not automatically 700 × 700 mm. The mounting size from the technical drawing is required, taking into account the profile, quarter, and technological gap.

Which mirror should I order for RM-033 and RM-028?

Only after receiving the full DWG. The nominal sizes of 800 and 900 mm are insufficient for ordering glass.

Can I use the frame for a painting?

The article considers these models as frames for mirrors. Using them for a painting requires separate verification of the fit, backboard, and mounting.

What size is suitable for a small hallway?

More often RM-035 700 mm. RM-033 is considered after a full-size fitting, and RM-028 usually requires a significantly larger wall space.

Which frame to choose above a narrow console?

RM-035 usually looks more proportional. RM-033 is possible if the furniture and wall are wide enough. RM-028 requires a large console and free space.

Which model suits a wide dresser?

RM-033 or RM-028. The choice depends on the width of the furniture, wall, sconces, and the desired role of the mirror — supporting or dominant.

Would RM-028 suit a vanity table?

Only a large table on a free wall. For a compact boudoir area, RM-035 or RM-033 are usually more manageable.

What material are the frames made of?

RM-035, RM-033, and RM-028 are made of MDF.

Can MDF be tinted like oak?

MDF does not have a natural oak texture. These models are more logically considered for opaque enamel and other confirmed systems for MDF.

Which enamel should I choose?

Compatible with MDF preparation and room conditions. Color, gloss, and number of layers are approved based on a test sample.

Do I need to prime the frame?

The specific system is determined by the finisher and the material manufacturer's recommendations. Edges and relief require particularly even preparation.

How to make a full-size template?

Mark the outer contour of 700, 800, and 900 mm on paper or wall, check the scale with a ruler, add axes, furniture, sconces, and free fields.

Can I hang the frame on one hook?

Without calculation, it's not possible. The number of points depends on the total weight of the frame, mirror, backing, hangers, and wall type.

Can RM-028 be installed on drywall?

Only if calculated embedded elements or another confirmed system are present. Attaching to a single sheet without engineering verification is risky.

How to check the horizontal?

Mark the central axis, transfer the actual suspension points, and use a level. The distance between fasteners is taken from the frame itself or the drawing.

Do I need to check the delivery route?

Yes. Especially for RM-028 and the kit with the mirror already installed. They take into account packaging, doorways, elevator, stairs, and turns.

Where to buy RM-035?

In the card, you can Buy RM-035 MDF frame and check the confirmed dimensions.

Where to order RM-033?

In the card, you can Buy RM-033 MDF frame, by requesting the full drawing and the light opening size.

Where to buy RM-028?

In the card, you can Buy RM-028 MDF frame after checking the wall, delivery access, and mounting.

Result: compact 700 mm, medium 800 mm, or large 900 mm

RM-035, RM-033, and RM-028 offer a sequential scale selection, but are not a single frame in three sizes. RM-035 has a confirmed square dimension of 700 × 700 × 75 × 37 mm, a twisted line pattern, and a "Prestige" finish. RM-033 with a nominal size of 800 mm suits medium compositions, while RM-028 at 900 mm is for large walls and furniture.

Before ordering, you need to make three templates, check the width of the wall and furniture, obtain the external, light opening, and mounting dimensions, clarify the configuration, and only then order the mirror panel. MDF is selected according to the agreed enamel, preserving the relief with thin, even layers. The mounting is calculated based on the total weight of the frame and mirror, wall type, and actual hangers.

STAVROS allows you to move from general selection to specific cards, interior solutions, and the art deco collection. A conscious route helps you buy not just a beautiful mirror frame, but a correctly scaled frame that fits on the wall, matches a console or dresser, is safely carried in, and assembled with a precisely calculated mirror panel.