On four facades, you need the same Gothic accent: how to buy wooden rosettes R-061 and choose a size of 70, 80, 90, 100, or 125 mm

A wardrobe, sideboard, or chest of drawers has four identical facades. On each one, I want to repeat the same Gothic sign so the furniture feels like a unified system. The model is already chosen — R-061. But the product page doesn't list one size, but five: 70, 80, 90, 100, and 125 mm. Moreover, as width and height increase, so does the relief thickness: from 12 to 21 mm.

Therefore, the question before purchase is not just "which rosette is prettier." You need to understand what scale the entire series of four fronts can handle, will not conflict with handles and frames, and will not turn a neat Gothic accent into a too heavy decorative center.

Correct order: measure the free field of each facade → make five full-size templates → apply the selected size to all four doors at once → check handles and protrusion → look at the furniture from a distance of 2–3 meters → only then choose beech/oak, Standard/Prestige and order four identical R-061.

As of September 9, 2026, the current card confirms five sizes of R-061, beech and oak, Standard and Prestige, production 5–10 days. The fresh price starts from 1,320 ₽ for a beech 70×70×12 mm Standard and goes up to 4,440 ₽ for an oak 125×125×21 mm Prestige.

Go to Catalog

Wooden rosette R-061: first real dimensions, then photo

R-061 is a carved wooden rosette with a pronounced Gothic ornament in the form of a twisted cruciform flower. This is not a neutral round medallion: the pattern is active and stylistically specific.

Current size matrix:

Size A × B × C	Beech Standard	Beech Prestige	Oak Standard	Oak Prestige
70 × 70 × 12 mm	1 320 ₽	1 710 ₽	1 490 ₽	1 850 ₽
80 × 80 × 14 mm	1 460 ₽	1 770 ₽	1 610 ₽	2 060 ₽
90 × 90 × 15 mm	1 740 ₽	2 330 ₽	2 160 ₽	2 820 ₽
100 × 100 × 17 mm	2 070 ₽	2 900 ₽	2 710 ₽	3 530 ₽
125 × 125 × 21 mm	2 650 ₽	3 480 ₽	3 540 ₽	4 440 ₽

If a specific model has already been approved, buy a wooden socket R-061 better after checking the scale on actual furniture.

With R-061, not only the diameter changes: the protrusion grows from 12 to 21 mm

This is one of the most useful characteristics of the card.

The buyer often compares only 70 / 80 / 90 / 100 / 125, as if a single flat square is changing.

But parameter C also grows:

• 70 mm → 12 mm;
• 80 mm → 14 mm;
• 90 mm → 15 mm;
• 100 mm → 17 mm;
• 125 mm → 21 mm.

That is, the large R-061 not only takes up more area, but also protrudes more from the facade plane.

In the product photo, this volume is easy to underestimate. On a real door, side lighting makes the 21-millimeter relief significantly more active.

Our factory also produces:

View Full Product Catalog

Five paper templates — the cheapest way to choose a size

Cut out squares:

• 70×70 mm;
• 80×80 mm;
• 90×90 mm;
• 100×100 mm;
• 125×125 mm.

Write the actual thickness on each one.

For example:

125×125 / protrusion 21 mm

Paper won't show the relief, but it immediately answers three questions:

1. is there enough free space;
2. how the size relates to the frame;
3. whether the rosette becomes too large on repeated facades.

For finalists, it's useful to make a three-dimensional cardboard mockup with an approximate protrusion of 12–21 mm.

Four facades need to be viewed simultaneously

The main mistake in such a project is attaching one R-061 to one door and deciding the size fits.

On four identical facades, the ornament repeats four times.

What looks like a neat single accent can become too intrusive in a series.

Therefore, after choosing two or three sizes, make four identical templates of each final option and install them simultaneously.

Compare:

• four 70-millimeter;
• four 90-millimeter;
• four 125-millimeter ones.

This way, you see not an individual detail, but the entire rhythm of the furniture.

How to choose the size of a wooden rosette based on the free field of the facade

You need not the full size of the door, but the clean decorative field after subtracting frames, moldings, handles, and other elements.

If the free field has a width W, and the square R-061 is placed in the center, formal side margin:

(W − S) ÷ 2, where S — the size of the rosette.

For example, with a free field of 300 mm:

R-061	Free field of 300 mm	Remainder on each side
70 мм	300−70=230	115 мм
80 мм	220	110 мм
90 мм	210	105 мм
100 мм	200	100 мм
125 мм	175	87.5 mm

This is not a design standard or a recommendation to "take 90." The table simply shows how the free space around the center changes.

R-061 70×70×12 mm: small repeating sign

The most compact version is convenient when you need to preserve a lot of air around the ornament.

It is especially logical for:

• narrow panels;
• four or more repeating facades;
• furniture with an already active frame;
• projects where R-061 should be noticeable only upon closer approach.

But 70 mm may turn out to be too small on a large sideboard or tall cabinet.

The decision should be viewed not on a screen, but on a real door.

R-061 80×80 and 90×90 mm: medium scale for repetition

80 and 90 mm fall between a small sign and a pronounced center.

These are convenient sizes for comparison across four facades, because the difference in area is noticeable, but not yet as radical as the jump to 125 mm.

At the same time, the protrusion changes from 14 to 15 mm — visually the volume remains moderate.

If 70 mm gets lost, and 100 mm already seems heavy, it's precisely 80/90 that should be placed side by side in two mockups and compared from a normal viewing point.

R-061 100×100×17 mm: already a full-fledged center of the panel

100 mm is a size that is hard to perceive as a small insert.

On four panels, you get four noticeable Gothic centers.

This needs to be checked especially carefully:

• whether the frame profile is too close;
• whether the rosette clashes with the large handle;
• whether the free space around it visually shrinks;
• does the center look the same on all facades.

If the furniture is wide and massive, 100 mm can work convincingly. On a compact dresser, it may already overload the composition.

R-061 125×125×21 mm: a large Gothic accent

The largest standard version requires a separate full-size check.

A 21 mm protrusion is already a noticeable three-dimensional detail.

If the handle is nearby, it is important to check not only the picture but also the actual hand movement.

If the facade opens next to another object, you need to ensure the protrusion does not create a mechanical conflict.

125 mm is especially useful to view:

• from the front;
• at 45°;
• from the side;
• under side lighting.

Carved rosette R-061 and furniture handle: we check not only the distance along the facade

The handle and rosette may not intersect visually, but may conflict functionally.

Check:

• the center of the handle;
• the finger trajectory;
• grip radius;
• the protrusion of the handle itself;
• handle R-061 12–21 mm;
• the direction of opening;
• the adjacent door.

The scenario is especially dangerous when the handle is located directly under the socket and a person hits the relief with their knuckles every time.

For four facades, the problem will repeat four times.

One socket on each door or fewer accents

Even if the original idea is four identical R-061, it is worth comparing several compositions.

Option A: one R-061 on each of the four doors.

Option B: only two sockets on the central facades.

Option C: one large R-061 on the central fixed furniture zone, if the design allows it.

Option D: R-061 only on the doors, and leave the drawers without repetition.

The task is not to necessarily buy four. The task is to find a composition where the Gothic motif truly works.

Why R-061 cannot be perceived as a universal classical rosette

The card directly characterizes R-061 as a Gothic element and warns that the model is difficult to combine with ordinary classical carving.

This is an important filter before purchasing.

Check the adjacent furniture details:

• cornice;
• Moldings;
• legs;
• handles;
• capitals;
• other overlays.

If all the furniture is built on soft floral baroque, one rigid Gothic finial may look accidental.

If the project already features gothic lancet, finial, or geometric motifs, R-061 gets a clear context.

Beech or oak: we choose not the "best species," but the future finish

Both wood species are available for R-061.

For opaque enamel, it is often rational to consider beech.

For a clear or semi-transparent finish where you want to preserve a pronounced wood texture, it makes sense to check oak.

But the wood species should not be chosen separately from the furniture.

If the fronts are already oak under oil, a beech rosette under the same clear finish may look out of place.

If the fronts are MDF under opaque enamel, the wood species of the decor may not be visually readable at all after painting.

What "Under enamel" means in the current base configuration

On the fresh card for the selected item 70×70×12 / beech / Standard, it states "For enamel."

This does not mean the part arrives painted.

It refers to preparing the wood for a future opaque finish.

If the project requires staining with visible texture, the corresponding execution and final finishing system must be agreed upon at the time of ordering, rather than concluding solely from the presence of oak in the table.

Standard or Prestige: how to assess the difference on a batch of four

If four identical parts are needed, the difference in preparation is multiplied by four.

For 90×90 mm:

• beech Standard: 4 × 1,740 = 6,960 ₽;
• beech Prestige: 4 × 2,330 = 9,320 ₽;
• the difference is 2,360 ₽ per set.

For oak 90×90:

• Standard: 8 640 ₽;
• Prestige: 11 280 ₽;
• difference — 2,640 ₽.

The point of the calculation is not that Prestige is "necessarily better." You need to understand how much manual finishing your trim carpenter includes and what surface quality is required before the final coat.

How much four R-061 sockets of different sizes cost

Below is the cost of only the sockets themselves according to the current price list, without finishing and installation.

Size	Beech Standard ×4	Beech Prestige ×4	Oak Standard ×4	Oak Prestige ×4
70 мм	5 280 ₽	6 840 ₽	5 960 ₽	7 400 ₽
80 мм	5 840 ₽	7 080 ₽	6 440 ₽	8 240 ₽
90 мм	6 960 ₽	9 320 ₽	8 640 ₽	11 280 ₽
100 мм	8 280 ₽	11 600 ₽	10 840 ₽	14 120 ₽
125 мм	10 600 ₽	13 920 ₽	14 160 ₽	17 760 ₽

Therefore, the choice of size affects not only the composition but also the final cost of the series.

Don't buy "with a 10% margin" for four piece sockets

For linear moldings, a percentage margin makes sense due to cutting.

For the piece item R-061, the "+10%" rule is meaningless: four facades require four parts, and 10% of four doesn't translate into a clear purchase.

Ordering a fifth socket only makes sense for a specific reason:

• need a spare for the future;
• replacement may be needed;
• the finish is unique and hard to replicate later;
• there is a fifth piece of furniture in the same system.

Otherwise, the quantity according to the approved composition is sufficient.

First one size — then the whole batch

If the project is expensive and the doubt between 90 and 100 mm remains, you can first order or receive for fitting one physical part of the chosen size, if the project timeline allows.

It will show what paper does not:

• real relief;
• shadow;
• thread quality;
• ornament scale;
• protrusion;
• interaction with the handle.

Only after confirmation can you order three more in the same specification.

But if the batch must receive one complex transparent finish, it is better to agree in advance how to ensure a uniform result.

What to check on four facades before final fixation

Before applying glue, lay out all four R-061 on the furniture.

Check:

• same center height;
• same indent from the frame;
• ornament orientation;
• same position relative to the handles;
• visual symmetry;
• absence of difference between the facades.

For marking, it is more convenient to use one template map rather than measuring "approximately from the edge" each time.

Four facades may seem identical but have different free margins.

Before ordering four identical R-061, measure not only the doors themselves but also their decorative fields.

On furniture, the following may differ:

• width of outer and central panels;
• position of hinges and handles;
• width of frame profile;
• presence of a lock;
• proximity to drawers;
• vertical moldings between sections.

If one door is 450 mm and another is 500 mm, the same R-061 will give different proportions of the free field.

This does not mean that the sizes of the rosettes must necessarily differ. On the contrary, the same Gothic sign is often better kept at the same scale. But the difference needs to be seen before purchasing.

Useful project table:

Facade	Clean field W × H	Handle	Selected R-061	Visual offset
F1	___ × ___	___	___	___
F2	___ × ___	___	___	___
F3	___ × ___	___	___	___
F4	___ × ___	___	___	___

If the fields are truly identical, great. If not, the decision is made based on the entire composition, not just the first door.

One mounting template is better than four independent measurements

After approving the size, it is useful to make not four separate ruler markings, but one rigid positioning template.

It records:

• the top edge of the facade;
• the side reference;
• the central axis;
• the R-061 contour;
• center of the element.

Thus, the same coordinate is transferred to F1–F4.

This reduces the risk that one socket ends up 3–5 mm higher than the adjacent one, and the difference becomes noticeable only after installation.

This is especially critical for the Gothic ornament: the repeating geometry highlights even a slight shift.

Before applying glue, dry-fit all four pieces and take a frontal photo of the furniture. It's easier to notice from the image if one axis is 'drifting' relative to the others.

How to narrow the choice between 70, 90, 100, and 125 mm without subjective 'liking'

You can use three sequential filters.

Filter 1 — physical location.
If 125 mm conflicts with a handle or frame, the size is excluded immediately regardless of aesthetics.

Filter 2 — series.
A size that looks good individually is checked in a fourfold repeat. If four elements overload the facade, they move to a smaller one.

Filter 3 — distance.
From 2–3 meters, the ornament should maintain its intended role. If 70 mm disappears and 125 mm dominates, the practical choice will be among the middle options.

This sequence is more useful than a rule like 'the rosette should occupy a quarter of the facade width.' The card doesn't specify a universal percentage, and furniture compositions are too diverse.

As a result, the size is chosen not by a single number, but by three confirmations:

fits physically → works in a series → is readable from the real viewpoint.

Mounting adhesive: a related product, but not a universal answer

Card R-061 offers TYTAN Prof. Classic Fix together with the product.

This is a useful accompanying option, but the specific installation depends on the base:

• solid wood;
• MDF;
• primed surface;
• painted facade;
• Polyurethane

Therefore assembly glue for wooden decor are chosen together with the technology of the specific surface, not just by the name of the socket.

Others Mounting and finishing materials it should also be selected after the base and finish are known.

If facades are already painted

Late installation is possible but requires separate verification.

Cannot automatically:

• degrease enamel with any solvent;
• sand the visible area without a restoration plan;
• choose adhesive only based on wood R-061.

If the socket is to be painted in the same color as the facade, it is technologically more convenient to install it before the final finish.

If it is a natural oak accent on painted furniture, separate installation after the finish may be part of the design.

If R-061 does not fit in size or style

There is no need to trim the gothic ornament to fit it into the free field.

It is better to return to the category and buy carved wooden rosettes of a different scale or character.

The catalog has dozens of models, so the alternative may differ:

• by size;
• by shape;
• by relief depth;
• by ornament style.

For a broader search, you can view the entire Carved wooden decoration.

Five mistakes when buying R-061

Mistake 1. Choosing the size based on a photo

The photo hides the real scale and protrusion.

How to avoid: full-size template on furniture.

Mistake 2. Check only one door

Four identical accents look stronger than one.

How to avoid: four templates at the same time.

Mistake 3. Forget about the thickness of 12–21 mm

Flat layout does not show conflict with the handle and side light.

How to avoid: a full-size 3D mock-up.

Error 4. Not considering handles

After ordering, it may turn out that the grip passes through the carved relief.

How to avoid: try the socket together with the installed or planned handle.

Mistake 5. Mixing Gothic with random classical carving

R-061 has a very specific language.

How to avoid: check the entire decorative set of furniture, not just one piece.

How to place an order without ambiguity

Bad:

R-061 sockets — 4 pcs.

Better, but not enough:

R-061, oak, 4 pcs.

Working line:

R-061 / 90×90×15 mm / oak / Prestige / finish ___ / facades F1–F4 / 4 pcs.

If a covering enamel is used:

R-061 / 80×80×14 mm / beech / Standard / preparation for agreed covering finish / facades F1–F4 / 4 pcs.

This way, the size, material, and preparation level cannot be lost between the customer, painter, and cabinetmaker.

When R-061 can already be ordered

Purchase is ready if:

• one of the five size versions is selected;
• four templates are checked simultaneously;
• handles are approved;
• the protrusion does not interfere;
• the Gothic ornament suits the style;
• beech or oak was chosen;
• Standard/Prestige defined;
• the finish is agreed upon;
• quantity confirmed.

After that, you can wooden socket R-061 to be styled as a specific element of the four facades.

Too early to buy yet

Postpone the order if:

• the dispute between 80 and 125 mm is resolved only by the screen;
• handles are still changing;
• facade frame not approved;
• finish unknown;
• the entire cabinet has not yet been reviewed with four templates;
• R-061 is being added to an explicitly non-Gothic carved composition without verification;
• the number of facades is still changing.

Main conclusion:

five sizes of R-061 are not five prices for the same decor, but five different scales and volumes for furniture.

On four facades, the selected size is repeated four times, so the decision should not be made based on one card or one door. Make four full-size templates, check the handles and the protrusion, look at the furniture from a distance, and only then choose the material and quality of finishing.

Questions before ordering R-061

What sizes of R-061 are available?

70×70×12, 80×80×14, 90×90×15, 100×100×17, and 125×125×21 mm.

What is R-061 made of?

made of beech and oak.

Are there Standard and Prestige?

Yes.

How much does the smallest version cost?

70×70×12 mm in Standard beech — 1,320 ₽ as of September 9, 2026.

How much does the largest oak Prestige cost?

125×125×21 mm — 4,440 ₽.

What is the production lead time?

5–10 days.

What is the ornament of R-061?

A pronounced Gothic finial.

Can R-061 be installed on a furniture front?

Yes. The product card directly lists panels and furniture as application scenarios.

How to choose between 70 and 125 mm?

Make full-size templates and evaluate them on the entire piece of furniture at once, not on a single door.

Why should thickness be considered?

Because the protrusion grows from 12 to 21 mm and affects shadows, interaction with handles, and the actual volume of the decor.

How many R-061 are needed for four facades?

If the scheme "one per door" is approved, then four. But the composition should be confirmed before ordering.

Do I need to buy a fifth one as a spare?

Only if there is a specific need. A percentage spare for piece decor is not applied automatically.

Can R-061 be combined with any classic carving?

The card warns that the Gothic ornament R-061 is not easy to combine with regular classic carving.

What to do if R-061 is not suitable?

Return to the category of wooden rosettes and choose a different size, shape, or style.

What should be checked last before payment?

Size, protrusion, four templates, handles, material, Standard/Prestige, future finish, quantity, and current price.