Buy MDF tabletop: rectangular ST-020 1930 × 1128 mm for 6 persons or square ST-020-1 1128 × 1128 mm for 4 persons — which to choose

Comparison of two classic tabletops from the same series for a family dining room, kitchen-living room, and DIY assembly of a dining table

Mirror Frame from MDF RM-044

from 326.08 $

MDF tabletop ST-023

from 82.22 $

Table leg STL-015

from 5,193.48 $

Base for table STL-020

from 2,627.06 $

Table pedestal STL-020-1

from 2,278.90 $

Tabletop ST-001 from MDF

from 146.02 $

Pedestal for Table STL-041

from 569.69 $

Baseboard for Table STL-042

from 566.77 $

Go to Catalog

ST-020 or ST-020-1: short answer

ST-020 is the choice for a spacious dining room, an elongated room, and a large dining table for about six people. Its size is 1930 × 1128 × 30 mm, surface area about 2.18 m², and the matching table base STL-020 has dimensions 1900 × 1100 × 750 mm. ST-020-1 is better suited for a compact kitchen-dining room, a square layout, and a table for about four people. Its size is 1128 × 1128 × 30 mm, area about 1.27 m², and the matching table base STL-020-1 has dimensions 1100 × 1100 × 750 mm.

Buy rectangular tabletop ST-020 Buy square tabletop ST-020-1 Buy table base for tabletop ST-020 Buy table base for tabletop ST-020-1

ST-020 is a rectangular tabletop. Size 1930 × 1128 × 30 mm, approximately 802 mm longer than the square model.

ST-020-1 — square tabletop. Size 1128 × 1128 × 30 mm, convenient for symmetrical seating of four people.

The area of ST-020 is approximately 71% larger. This provides more space for serving but requires a more spacious room and clear walkways.

The number of seats depends not only on the tabletop. You need to consider the width of the chairs, the position of the legs, the underframe design, and the free space around.

MDF is chosen for opaque enamel. Combined versions with solid wood and oak or beech veneer are suitable for projects where it is necessary to preserve the wood texture.

Both models have a thickness of 30 mm and a classic shaped profile. The main fork is not a decorative edge, but the shape, area, and usage scenario.

A buyer who wants to purchase an MDF tabletop often starts with the color and edge shape. For the pair ST-020 and ST-020-1, this is not enough. Both models belong to the same classic series, have the same thickness of 30 mm, a shaped profile, "Prestige" quality sanding, and the same material logic. But the rectangular tabletop is 802 mm longer and provides almost 0.90 m² more usable surface. This is no longer a decorative difference, but a different scale of the room, table setting, and everyday use.

ST-020 is suitable for a family that regularly gathers around a large table, hosts guests, uses the central part for shared dishes, and has space for a large underframe. ST-020-1 is designed for a more compact scenario: four people sit on four sides, the distances between them feel more even, and the square shape fits more easily into a kitchen-dining room or the center of a symmetrical room.

The shape also affects the delivery route. A panel 1930 mm long needs to be carried through a doorway, turned on a landing, or placed in an elevator. The square 1128 × 1128 mm is shorter, but due to equal sides, it also requires checking turns. Buying without prior measurement can result in the tabletop fitting the room but not fitting the path to it.

For a spacious dining area, you can choose the ST-020 tabletop measuring 1930 × 1128 mm. For a compact four-seat table, choose the ST-020-1 measuring 1128 × 1128 mm. If neither shape matches the layout, it is wiser to open the STAVROS furniture tabletops catalog and choose a different size before ordering the underframe.

Watch video ...

What is a furniture tabletop and why it should not be confused with a kitchen work surface

ST-020 and ST-020-1 are designed for assembling a standalone dining table. These are furniture tabletops with a shaped classic profile, which are installed on a suitable base and receive the selected finish. They are not a ready-made kitchen work surface for a sink, hob, constant contact with water, hot cookware, and household chemicals.

This difference is important for the buyer. When searching for "MDF tabletop buy," the results often show completely different products: kitchen work panels, window sills, bathroom countertops, desks, and furniture blanks. ST-020 and ST-020-1 should be evaluated as parts of a dining table, not as a universal material for any horizontal surface.

Our factory also produces:

MDF Mirror Frame RM-033

from 305.22 $

MDF Mirror Frame RM-028

from 221.53 $

MDF Mirror Frame RM-040

from 200.67 $

Pedestal for Table STL-027

from 2,628.40 $

ST-020 countertop

from 252.76 $

Table Frame STL-031

from 429.65 $

Table frame STL-030

from 475.88 $

MDF Wooden Cornice KZ-016

from 19.76 $

View Full Product Catalog

The tabletop defines the shape of the table

The underframe affects stability, seating, and style, but it is the top panel that determines the outer contour. The rectangular ST-020 directs seating along the two long sides and leaves the ends for additional seats or serving. The square ST-020-1 makes all sides equal and creates a symmetrical composition.

A thickness of 30 mm does not explain the entire construction

The same thickness does not mean the same load, weight, or attachment scheme. Exact weight figures are not specified in the confirmed data, so they cannot be invented. The large ST-020 has a larger area and requires a corresponding base, and the attachment points need to be coordinated with the chosen underframe.

The shaped profile affects the usable edge

The classic edge makes the tabletop more expressive, but the edge cannot be considered a flat working strip across the entire width. When arranging plates and items, the shape of the profile is taken into account. This is especially important on the square model, where each person uses one side and interacts with the edge more often.

Finishing is part of the project

MDF execution is chosen for opaque enamel. Combined options with solid wood and oak or beech veneer help preserve visible wood texture. Before ordering, you need to decide whether the table will be monochrome, contrasting, or tinted to match other furniture items.

Confirmed characteristics of ST-020 and ST-020-1

Rectangular or square tabletop: what changes in a real room

The shape of the table affects not only the appearance. It determines the direction of movement, the arrangement of chairs, access to shared dishes, and how the furniture occupies the room. The rectangular ST-020 builds the composition along the long axis. The square ST-020-1 gathers people around the center and makes all four sides equal.

After comparison, it is worth moving from the general shape to the specific product cards. For a large family table, you can view the materials and finish options for ST-020. For a compact symmetrical composition — view the options for ST-020-1.

Why the 802 mm difference matters more than the identical profile

Both tabletops have the same width of 1128 mm and thickness of 30 mm. The difference lies in the length: ST-020 reaches 1930 mm, ST-020-1 reaches 1128 mm. At first glance, a buyer may perceive both models as similar in style because the shaped edge is the same. In a room, the difference becomes fundamental.

The length sets the direction of movement

People walk around the long sides and ends of a rectangular table. It creates a longitudinal route and requires more space at the ends. A square model occupies a uniform area and does not extend the passage in one direction.

Length affects the number of chairs

On the long sides of ST-020, several seats can be arranged if the underframe design does not interfere with legs. ST-020-1 naturally divides into four sides. Attempting to constantly seat two people on each side of a square model can lead to cramped seating, especially with wide classic chairs.

Length affects lighting

Above ST-020, an elongated lighting setup is often required: multiple pendants, a long light fixture, or uniform central lighting. Above a square model, it is easier to use a single central light fixture. The article does not specify a particular chandelier, but the lighting geometry should be planned before final furniture arrangement.

Length affects delivery

A 1930 mm panel is more difficult to turn in a narrow corridor and on stairs. Even if the doorway is wider than the tabletop thickness, the entire trajectory matters. It is necessary to consider door heights, landing widths, turns, railings, and the possibility of carrying the element diagonally.

Area difference of about 71%: what the buyer gets in practice

The area of ST-020 is approximately 2.18 m², ST-020-1 is about 1.27 m². The rectangular model provides roughly 0.90 m² more surface area. This does not mean that every centimeter is equally useful: the shaped edge, dishes, underframe, and access area affect actual use. But the difference shows the scale.

More space for individual serving

Six sets of plates, cutlery, and glasses require noticeably more space than four. ST-020 allows you to distribute seats along the long sides without converging all items to a single center. However, you need to determine in advance whether the ends will be occupied by chairs.

More space for shared dishes

On a large tabletop, it's easier to place dishes, decanters, and decor in the central strip. But the width of both models is the same — 1128 mm. This means access from the edge to the center is similar, and the advantage of ST-020 is primarily in length.

More surface area means more demands on the room

A large table cannot be evaluated solely by whether a 1930 × 1128 mm rectangle fits between the walls. Zones for chairs and passage are needed. If people cannot stand up freely after installation, the tabletop becomes inconvenient despite its large area.

Compact area can be an advantage

ST-020-1 does not automatically lose out. For a family of two or three people or regular seating for four, extra area can turn into empty space and take up the room. The square model makes communication and table setting more compact.

ST-020 for a table for approximately six persons

The rectangular tabletop ST-020 is best showcased with the corresponding underframe STL-020 measuring 1900 × 1100 × 750 mm. In the product card, such a set is described as a dining table for approximately six persons. This is a guideline for selection, not a strict guarantee: actual seating depends on chair width, leg placement, and whether the ends are used.

Family dining room

For a family that gathers daily around one table, a length of 1930 mm allows for seating arrangements while leaving the center for dishes. The large surface is also suitable for home activities, work, or serving if the table is used not only during meals.

Entertaining guests

ST-020 allows seating several people without needing to add a separate table each time. But if large gatherings are rare, you need to honestly assess whether the constant large size is justified. Sometimes a compact table and an additional temporary surface are more convenient.

Spacious kitchen-living room

In an open space, a rectangular table can zone the kitchen and living room. The long axis helps direct movement and separate the dining area. At the same time, the table should not block the passage to kitchen cabinets and the balcony.

Office or Meeting Room

In terms of size, ST-020 may suit a large work or meeting composition if the project allows for a classic profile and corresponding underframe. However, the article primarily considers it as a dining tabletop. Electrical wiring, cable channels, and other functions cannot be considered included without confirmation.

For a large set, you can choose ST-020 with oak veneer or MDF under enamel, and then assemble a large table with the ST-020 tabletop.

ST-020-1 for a table for approximately four persons

The square ST-020-1 measuring 1128 × 1128 × 30 mm is designed for a more compact dining group. The corresponding table base STL-020-1 measures 1100 × 1100 × 750 mm and is positioned as a table base for approximately four persons. The four sides allow seating one person on each side if the table base leaves enough legroom.

Kitchen-dining room

A square is easier to place in a room that is close to square. It does not elongate the space and can stand in the center under a light fixture. However, the width of 1128 mm remains significant: the model cannot be considered a small kitchen table without checking the room.

Family of two to four people

For daily breakfasts and dinners, the square shape maintains a close distance between those seated. The center is accessible from all sides. If the family rarely hosts a large group, ST-020-1 may be more rational than a permanent tabletop nearly two meters long.

Symmetrical living room

In a room with a central composition, a square table supports the axes of the room, rug, and light fixture. The classic profile makes it more expressive but does not set a long direction like ST-020.

Compact commercial interior

ST-020-1 can be used in an office, salon, or small meeting area if the dimensions and style suit the project. Four equal sides are convenient for conversation. However, the durability of the finish and conditions of intensive use must be agreed upon separately.

For a compact set, you can order ST-020-1 with oak veneer or choose MDF, and then assemble a compact table with ST-020-1 tabletop.

How to choose a shape based on room layout

Layout helps you choose a shape faster than abstract photo comparison. You need to measure the free area after accounting for the kitchen, sofa, cabinets, doors, and walkways. The table must fit not in an empty room, but in a real interior with people moving around.

Elongated room

ST-020 usually supports the longitudinal axis and allows using space along the wall or between the kitchen and living room. It's better to position the table so that the long sides do not block the main passage. If the room is narrow, the width of 1128 mm plus chairs may be critical.

Square room

ST-020-1 is easier to center. Equal margins around the table make the interior calmer. A rectangular model in such a room may leave too narrow passages at the ends or visually pull one side.

Room with bay window

A square tabletop can work well in a symmetrical bay window, but the actual geometry of the walls is more important. A rectangular one suits an elongated bay window. Before ordering, a plan is made with open doors, radiators, and curtains.

Kitchen with island

A working passage is needed between the table and the island. ST-020 can run parallel to the island or, conversely, be placed across it. ST-020-1 occupies a uniform area. You cannot choose a model without considering the opening of drawers and movement near appliances.

Room with complex route

If the dining room is a passage to a balcony, staircase, or another room, a large ST-020 can cut through movement. A square model sometimes leaves more predictable passages, but also requires free space on all sides.

How much space to leave around the dining table

The buyer often measures only the tabletop and is happy that it fits between the walls. But the table has to be used with chairs. A person needs to approach, pull out a chair, sit down, and walk behind another seated person. Therefore, the plan is built not along the contour of the tabletop, but along the entire usage zone.

Minimum functional clearance

Space should remain behind the chair to allow pulling it out and standing up. As an approximate household range, about 750–900 mm from the edge of the tabletop to an obstacle is often considered. This is not a building code or a universal guarantee: wide armchairs, armrests, and large under-table structures require more space.

Passage behind a seated person

If people constantly walk behind chairs, a single seating gap is not enough. A passage usually requires a more open corridor, often around 1000–1200 mm or more depending on the furniture. It is better to check with a mockup using real chairs, not just a diagram.

Doors, drawers, and cabinets nearby

An open refrigerator door, kitchen drawer, or cabinet flap can block the passage even with the correct distance to the wall. The plan should show furniture in the open position. This is especially important for ST-020, which occupies a long central area.

Ends of a rectangular table

If the ends are used for seating, they need the same clearance as the long sides. If there are no chairs at the ends, the passage should still remain convenient. Do not push ST-020 flush against the wall just because no one sits there: this will complicate cleaning and serving.

All four sides of a square table

ST-020-1 assumes equal access from all sides. If one side is pushed against the wall, the table loses its main symmetry and effectively becomes a three-sided seating arrangement. This scenario is possible, but then the number of seats and convenience need to be recalculated.

How to arrange chairs without losing the stated seating scenario

The phrase 'table for four or six persons' describes a recommended set with the corresponding underframe, not the mathematical capacity of a single panel. Chairs can be narrow or wide, with or without armrests, and table legs may occupy part of the space under the edge. The arrangement should be checked before ordering.

ST-020 for six persons

The most understandable layout is two people along the long sides and one at each end, or three people along each long side without end seats, if the design allows. Which option is more convenient depends on the underframe and the width of the chairs. Both scenarios cannot be automatically considered equally comfortable.

ST-020-1 for four persons

One chair on each side creates a symmetrical seating arrangement. All seated have equal access to the center. If placing two chairs per side, a width of 1128 mm may be insufficient for comfortable seating, especially with classic armchairs.

Armrests and seat width

An armchair with armrests takes up more space than a lightweight chair without them. The armrest may not fit under the tabletop due to a shaped edge or underframe aprons. Before purchasing chairs, measure not only the overall width but also the height of the armrest.

Legs and underframe aprons

Even a large tabletop can result in uncomfortable seating if a leg hits the seated person's knees. Therefore, the number of seats is determined based on the complete system of "tabletop + underframe + chairs." For ST-020 and ST-020-1, corresponding bases are provided, but compatibility should still be verified using the product cards.

Template with chairs

If the chairs have already been purchased, arrange them in the room along the future contour of the table. Mark the boundaries with painter's tape and check the seating. Such a test provides more information than a visualization without real dimensions.

Where to place shared dishes and how shape affects table setting

The width of both tabletops is the same — 1128 mm. This is an important fact: access from the long edge of ST-020 and any side of ST-020-1 to the center is comparable. The difference appears in length, where the rectangular model has a larger central strip.

Table setting for ST-020

Individual seats are located along the long sides and at the ends. Shared dishes can be distributed in several groups along the length so that a person does not have to reach across the entire table. Central decor is best kept low if it is important to see interlocutors at the table.

Table setting for ST-020-1

Shared dishes are concentrated in the center, accessible from four sides. The square shape is convenient for a family dinner where everyone uses one central area. If you place large decor, it will quickly take up a significant portion of the surface.

Festive table setting

ST-020 provides more space for several dishes, candles, and textiles. However, a large number of items makes access to the center more difficult. ST-020-1 is easier to set compactly, but for a large amount of tableware, you will have to clear the surface more often.

Everyday use

If the table is used simultaneously for work, homework, and meals, the larger ST-020 allows you to divide zones. On the square model, items intersect more quickly in the center, but the room remains more spacious.

MDF for opaque enamel

Both models are available in MDF. This option is chosen when the surface needs a dense, opaque coating and preserving the natural wood grain is not required. MDF helps achieve a smooth, uniform surface and clearly emphasizes the shaped edge.

White tabletop

White enamel visually lightens the large ST-020 and complements a classic dining room. On the ST-020-1, the white color enhances symmetry and helps integrate the square table into a bright kitchen-living room. The gloss level and exact shade must match the underframe and other furniture.

Dark enamel

A dark color makes the shaped profile more noticeable and visually weighs down the table. The effect is stronger on the large rectangular model due to its area. In a compact room, the dark ST-020 may dominate, while the ST-020-1 maintains a more contained scale.

Colored enamel

A complex shade helps tie the table to kitchen fronts, walls, or textiles. However, an exact color match requires a test sample. It cannot be assumed that the same code on different materials will automatically look the same with different primers and gloss levels.

Why MDF is not chosen for wood texture

An opaque finish hides the natural grain. If the buyer wants to see the fibers of oak or beech, it is more logical to consider a combined version with veneer. Coating veneer with dense enamel unnecessarily means giving up its main visual advantage.

The choice is explained in more detail in the guide on how to choose an MDF tabletop for a table.

Combined tabletop with oak veneer

The oak version consists of MDF, solid wood, and oak veneer. It cannot be called a solid oak tabletop. Such a designation would create incorrect expectations regarding construction, weight, and material behavior. The buyer receives a combined product with visible oak texture.

When oak is justified

Oak veneer is chosen for interiors where the table should match the floor, doors, cabinets, or other oak elements. Tinting can make the texture light, natural, or more contrasting. The exact result is checked on a finish sample.

ST-020 with oak veneer

A large surface turns the wood grain into a significant part of the interior. On a tabletop of 1930 × 1128 mm, the texture reads more strongly than on a compact model. The direction of the veneer and shade must be coordinated with the base in advance.

ST-020-1 with oak veneer

The square shape gathers the pattern around the center. Such a table suits a symmetrical interior and can become a natural wooden accent in a light kitchen-living room. Tinting should account for lighting from all four sides.

Why dense enamel over oak veneer is usually impractical

Enamel hides the texture for which the combined option was chosen. If the project requires a solid color surface, MDF often becomes a more obvious choice. Exceptions are possible based on technology and task, but they must be justified before ordering.

Combined tabletop with beech veneer

The beech option also combines MDF, solid wood, and beech veneer. It preserves the wood texture and helps connect the table with beech base parts or other furniture. This is not solid beech wood, and this distinction must be maintained in the order description.

Light natural finish

Beech can support a calm, light interior without creating strong contrast. On ST-020 it softens the large scale, on ST-020-1 it makes the square composition warmer.

Toning to match existing furniture

The color should be selected based on an actual sample. Beech and oak absorb toning differently, so the same shade name does not guarantee the same result. For a set, it is better to finish the tabletop and underframe consistently.

When beech is better than oak

The choice depends not on an abstract 'best species', but on adjacent materials. If the interior has many beech elements or a calmer pattern is needed, beech may look more harmonious. If a pronounced oak texture is required, choose oak.

Same material for tabletop and underframe

The combination looks more cohesive when the species and finish are matched. But the exact composition of the underframe must be checked in the product card. The base material cannot be assumed based only on the series name.

Why a veneered model cannot be called solid wood

The combined construction uses MDF, solid wood, and veneer. Solid wood means a different product structure. Substituting terms misleads the buyer and may create incorrect expectations regarding weight, wood movement, repair, and price.

Veneer provides visible texture

A thin layer of natural wood forms the external pattern. The buyer sees oak or beech and can use a transparent or tinted finish. The base remains composite.

Solid wood is part of the construction but does not make the entire panel solid

The presence of individual solid elements does not mean the entire tabletop is cut from a single wood slab. The full composition must be read in the product card, not chosen by a single word.

A correct description helps select the finish

The craftsman understands which surfaces have veneer, where the solid wood is, and how to prepare the product. An incorrect designation of "solid oak" can lead to unsuitable technology and the expectation of uniform texture on all sides.

How to choose a base for ST-020

A base STL-020 measuring 1900 × 1100 × 750 mm is provided for the rectangular tabletop. The dimensions are close to the top size of 1930 × 1128 mm and form a large dining table. The buyer needs to evaluate not only the outer contour but also legroom, attachment points, and the possibility of assembly indoors.

Base size

The base occupies almost the entire area under the tabletop. This supports the scale and classic look but may affect the seating of end chairs. Before ordering, the drawing must be studied and the location of supports checked.

Height 750 mm

The base height forms a standard dining scenario, but the final table height depends on the joint design and a 30 mm thick tabletop. The exact mark of the finished table should be confirmed by the set, rather than mechanically adding dimensions without considering the fit.

Mounting

The SEO scheme does not specify exact points, fasteners, or installation diagram. They cannot be invented. Compatibility of STL-020 and ST-020 is confirmed as a product bundle, but before assembly, the master must check the drawings and completeness.

Mounting points

The frame is described as the base of a table for approximately six people. The actual seating is checked with chairs. If the supports occupy the ends, the scheme may differ from the customer's expectation.

For a complete set, you can choose a carved underframe for a rectangular tabletop.

How to choose an underframe for ST-020-1

A square tabletop corresponds to STL-020-1 measuring 1100 × 1100 × 750 mm. The base mirrors the symmetry of the top and forms a table for approximately four people. The difference in side length between the tabletop and underframe is small, so the design looks assembled and classic.

Symmetry of the base

The square frame must be precisely oriented relative to the tabletop. Even a slight offset is noticeable on all four identical sides. Marking is done along the axes, not from a random edge.

Legroom

The underframe measuring 1100 × 1100 mm occupies almost the entire square under the tabletop. The structure needs to be studied and the location of the supports checked. Four positions are only possible with convenient access from each side.

Mounting compatibility

As with the large set, the exact layout cannot be invented. Before assembly, check the cards, drawings, and completeness. If the tabletop is purchased separately from the base, compatibility is confirmed before finishing.

For a square set, you can choose a carved underframe for a square tabletop.

Can the tabletop be placed on a different underframe

Theoretically, a furniture tabletop can be used with another base if it is designed for dimensions, load, attachment points, and support distribution. In practice, this is already a separate design project. The recommended STL-020 and STL-020-1 are convenient because they form confirmed pairs with the corresponding tabletops.

Why a single size match is not enough

The base may have suitable length and width, but inconvenient attachment points, too much tabletop overhang, or supports in the leg area. You cannot choose a frame based only on the outer rectangle. A drawing, connection diagram, and understanding of loads are needed.

Tabletop overhang beyond the base

The overhang affects the appearance and fit. Too small makes the edge visually heavy, too large can increase stiffness requirements. For ST-020 and ST-020-1, the recommended underframes are close in g

Four separate legs

This option seems simple, but the leg placement determines the fit and load on the edge. For a rectangular tabletop, deflection and wobbling must be eliminated. For a square one, precise symmetry must be maintained. The decision is made by the furniture maker based on the design.

When it's better to take a recommended pair

If the buyer wants to assemble a classic table without designing a new base, a confirmed set reduces the number of unknowns. You can match the tabletop, underframe, material, and finish in advance. A guide on how to choose an underframe for a tabletop, helps check compatibility before ordering.

How to check attachment points and completeness

External model matching does not replace technical verification. Before finishing and assembly, you need to know which elements are included in the set, where the mounting zones are located, and what fasteners are needed. If precise data is not in the SEO scheme, clarify it in the product card or with a STAVROS manager.

Checking drawings

The tabletop and underframe are opened side by side and dimensions are compared. Check that the fasteners do not fall into the shaped edge, veneer, or thin part of the structure. Holes cannot be marked only by external boundaries.

Axis marking

A rectangular set is centered along the long and short axes. A square one is centered along two equal axes. Even a slight shift is noticeable in the overhangs and can affect stability.

Fastening

The type, length, and quantity of fasteners are not confirmed in the source data. They cannot be assigned in the article. The master selects fasteners based on the structure, material, and card recommendations. A screw suitable for one layer of MDF may be unacceptable for another mounting area.

Finishing before or after drilling

Mounting holes and fitting should be coordinated before the final finish to avoid damaging the enamel or veneer. At the same time, exposed areas must receive protection according to the finishing technology. The sequence is determined by the workshop.

Assembly indoors

A large table is often more convenient to bring in as separate parts and assemble in the room. But this is only possible with a detachable design and access to the fasteners. Such a scenario is checked before delivery, not after bringing in the tabletop.

How to check if the tabletop will fit through the door, stairs, and elevator

The transport route starts not at the apartment door, but at the unloading point. You need to go through the entire path: entrance, vestibule, elevator, stair landing, hallway, and doorway to the dining room. The panel dimensions are measured together with the protective packaging if its dimensions are known.

ST-020 with a length of 1930 mm

An almost two-meter panel can fit vertically through a standard tall doorway, but the problem often arises when turning. A narrow landing, low ceiling, railings, or an adjacent door restrict diagonal movement. A real turning diagram needs to be constructed.

ST-020-1 measuring 1128 × 1128 mm

A square is shorter along one axis, but both sides exceed a meter. In a narrow corridor, it cannot be carried long side forward like a rectangular panel. Turning requires sufficient width in both directions simultaneously.

Elevator

The height, width, and depth of the elevator car are measured, as well as the door opening. You cannot rely solely on the rated load capacity. Even a lightweight panel may physically not fit. The exact weight of the countertops is not confirmed, so it is clarified before choosing the lifting method.

Stairs

Critical points are the turn between flights, the height under the next landing, and the distance between railings. A full-scale mockup made of slats or cardboard helps check the route without risk to the product.

Door to the room

The clear opening is measured, taking into account trim, hinges, and the opening angle. Sometimes the door is temporarily removed, but this scenario needs to be coordinated. The countertop cannot be pushed with force: the shaped edge and finish may be damaged.

Protective packaging

Packaging increases the dimensions and is necessary for preservation. You cannot calculate the passage based on clean dimensions and then remove the protection on the stairs without a plan. The current packaging and delivery conditions should be clarified with STAVROS.

How to account for weight and carrying if the exact weight is not specified

The large area and combined design suggest that the tabletop cannot be carried like a small shelf, but the exact weight cannot be made up without a card. The buyer needs to know the weight of the specific version in advance: MDF, oak, and beech options may differ.

Number of people

The number of movers is determined by the confirmed weight, dimensions, and route. Even if the weight allows carrying by two people, the nearly two-meter ST-020 requires control of angles and even support.

Carrying by the shaped edge

The edge should not be the only gripping area. Pressure on the decorative profile can damage the finish or geometry. Use safe points and devices coordinated with the packaging.

Vertical storage

Do not leave the tabletop in a random vertical position without support for a long time. Storage conditions depend on the design and manufacturer's recommendations. Before installation, keep the part in a dry room and protect it from impacts.

Acclimatization and finishing

Wooden and veneered elements are sensitive to room conditions. The exact acclimatization times are not confirmed, so they should be clarified with the workshop. Do not immediately move a cold part into a warm room and start finishing without assessing its condition.

What to buy together with the tabletop

A finished table requires more than just a top panel. The main set includes a compatible base, coordinated finish, and assembly diagram. Internal articles help understand how to assemble the system and how a furniture tabletop differs from a kitchen work surface.

How to avoid confusing these tabletops with similar products

Furniture tabletop and kitchen work panel

ST-020 and ST-020-1 are designed for a standalone table. They do not have confirmed properties of a working kitchen surface for a sink, hob, constant moisture, or hot cookware. Commercial queries about kitchen worktops cannot be used for these products.

MDF and solid wood

The MDF version is a separate option for enamel. Combined versions include MDF, solid wood, and veneer. None of them can be automatically called a solid wood countertop.

Oak veneer and wood imitation

Veneer is a natural layer of wood, but the construction remains combined. It is not a film with a pattern or a solid oak board. Correct understanding helps choose the finish and care.

Countertop and finished table

A countertop card does not mean that the purchase automatically includes the underframe, fasteners, trim, and chairs. Completeness is checked separately. A finished table requires a confirmed base and assembly.

ST-020-1 and a small kitchen table

The 1128 mm side makes the model more compact than ST-020, but not miniature. In a cramped kitchen, a square can take up significant space. A plan with chairs needs to be made.

ST-020 and a universal table for any number of seats

A large area does not automatically mean seating for eight or ten people. The recommended scenario is about six persons with a corresponding underframe. Additional seats are checked separately.

Practical selection for specific situations

Need a family table for everyday use and for guests

If five to six people regularly sit at the table and the room allows for walkways, ST-020 seems more logical. It provides additional length and serving area. Before ordering, arrange real chairs and check the STL-020 underframe.

The family consists of two to three people

ST-020-1 is often more rational. Four sides maintain space for a guest, and the area does not become a permanent empty zone. If the room is very small, even the 1128 mm square should be compared with other models in the category.

The room is elongated along the window

ST-020 can be placed along the longitudinal axis, preserving movement along the long sides. Check that one end does not block a door or radiator. The square model will leave more free length but may not support the room's geometry as well.

The kitchen-living room has a square dining area

ST-020-1 is easier to align with the rug, light fixture, and walls. Four seats are evenly distributed. A large rectangular model may disrupt symmetry and occupy the passage to the sofa.

Need a table for white enamel

Choose the MDF version. It matches the opaque finish and does not require paying for visible wood texture that will be covered by paint. A test paint sample is still mandatory.

Need a table with oak texture

Consider a combined option with solid oak and oak veneer. For the large ST-020, the pattern will become a noticeable part of the interior; for the ST-020-1, it will be a more compact central accent. Do not call the product solid wood.

Need a table in beech finish

A combined option with beech veneer helps tie the table to beech furniture or underframe. The shade is matched according to a sample because beech and oak absorb tinting differently.

The table needs to be carried up a narrow staircase

First, make a full-size template of the dimensions and walk the route. ST-020 is more difficult due to its length of 1930 mm; ST-020-1 due to its square shape. If neither fits, the issue is resolved before ordering, not by removing the finish on site.

The buyer wants their own underframe

You need to provide the furniture maker with a drawing of the tabletop, material, dimensions, and profile. They calculate the supports and fastening. If such a project is not ready, it is safer to use the recommended STL-020 or STL-020-1.

The table is needed for a commercial space

The size and shape may suit a restaurant, salon, office, or meeting room, but the finish must match the intensity of use. The initial data does not confirm special commercial coatings, so requirements are agreed upon separately.

Mistakes when buying ST-020 and ST-020-1

Choosing a tabletop only by photo

On the card, both models may look similar in style because the shaped profile is the same. In the room, the difference of 802 mm in length changes everything: passages, number of chairs, lighting, and delivery route. Before buying, you need a scale plan.

Not measuring the free area of the room

The total room size says nothing without furniture. You need to subtract kitchen cabinets, sofa, passages, doors, and opening zones. The tabletop must fit together with chairs and people.

Forgetting about space for pulling out chairs

The table may physically fit between walls but turn out to be uncomfortable. Check the minimum gap for seating and a separate passage behind a seated person. Real chairs give a more accurate result than an averaged drawing.

Considering the square model as a table for six persons

ST-020-1 is primarily designed for a set of about four people. Additional seats can make seating cramped and conflict with the underframe. The number of seats cannot be determined only by the area of the top panel.

Buying ST-020 for a cramped kitchen

A large surface is attractive, but the length of 1930 mm and width of 1128 mm require a spacious area. If the aisles narrow, the table will interfere every day for the sake of rare large gatherings.

Choose ST-020-1 for regular large groups

A square model is convenient for four people, but quickly fills up with shared dishes and extra seats. For a permanent seating of five to six people, the rectangular ST-020 is better suited if the room allows.

Do not check the under-table area

The tabletop does not exist separately from the base. Legs and aprons determine legroom, stability, and attachment points. Buying the top and frame at different times without verification is risky.

Consider a veneered model as solid wood

The combined composition includes MDF, solid wood, and oak or beech veneer. This is not a solid board from a single species. Incorrect description leads to wrong expectations regarding construction and finish.

Choose MDF when visible texture is needed

MDF is rational under opaque enamel. If you want to preserve the pattern of oak or beech, you need to look at combined options with veneer. Otherwise, the expectation of natural texture will not be justified.

Order veneer under dense enamel without reason

The opaque coating hides the texture. If oak or beech should not be visible, MDF may be a more understandable base. The material is chosen for the finish, not for the prestige of the name.

Do not consider the shaped edge

The dimension 1930 × 1128 or 1128 × 1128 mm describes the outer contour. The shaped profile affects the placement of dishes at the edge and the attachment points underneath. The entire area cannot be considered equally functional.

Do not check the doorway and stairs

ST-020 with a length of 1930 mm is especially critical. The buyer may prepare an ideal spot in the room but fail to bring the panel in. The route is checked together with the packaging and turns.

Assign fasteners independently

The source data does not contain an exact installation diagram. You cannot choose screws and drill the tabletop based on general advice. The fastening must match the material, seating area, and under-table.

Consider the furniture tabletop as a kitchen worktop

Properties for embedding a sink, hob, constant moisture, and hot dishes have not been confirmed. ST-020 and ST-020-1 are intended for a dining table. Use outside this scenario requires separate confirmation.

Do not provide for finishing

The material and quality of sanding do not imply a ready-made protective coating of any color. Before ordering, you need to decide who will apply the enamel or tint, how the edges will be finished, and when assembly will take place.

Who is ST-020 suitable for

• a family that regularly gathers around a table of five or six;
• a spacious dining room or kitchen-living room;
• an elongated layout with a long dining area;
• a buyer who needs a surface of about 2.18 m²;
• a project with a large classic pedestal STL-020;
• serving with several shared dishes;
• family celebrations and entertaining guests;
• MDF for opaque enamel;
• combined option with oak or beech veneer;
• a space where you can leave passages on all used sides.

When it's better not to choose ST-020

• the room is cramped and chairs cannot be freely pulled out;
• one or two people sit at the table daily, and guests are rare;
• the tabletop does not fit through stairs, elevator, or door route;
• the long shape blocks the main passage;
• the underframe is not confirmed for dimensions and fastening;
• the buyer needs a kitchen work surface;
• a solid wood table is required, not MDF or a combined construction.

Who ST-020-1 is suitable for

• for a family of two to four people;
• for a square or symmetrical kitchen-dining room;
• for a central dining group under a single light fixture;
• for a buyer who needs an area of about 1.27 m²;
• for a table for approximately four people with STL-020-1;
• for an interior where all four sides should be equal;
• MDF with enamel finish;
• for a version with oak or beech veneer;
• for a compact classic composition without a length of 1930 mm;
• for a room where access from four sides can be provided.

When it's better not to choose ST-020-1

• five to six people regularly gather at the table;
• a lot of space is needed for festive table setting;
• the room is very elongated and the square shape disrupts the walkways;
• one side will have to be constantly pressed against the wall;
• wide armchairs do not fit between the under-table elements;
• a working kitchen countertop for equipment is required;
• the 1128 × 1128 mm model is still too large for the room.

What to Check Before Ordering

• article ST-020 or ST-020-1;
• exact size and shape;
• the free area of the room together with the chairs;
• main and secondary aisles;
• number of daily and guest seats;
• width of chairs and height of armrests;
• position of table supports;
• recommended frame STL-020 or STL-020-1;
• drawing and attachment points;
• material: MDF or combined option;
• oak or beech veneer;
• enamel or tinting;
• route through entrance, elevator, stairs, and door;
• exact weight of specific configuration;
• completeness and assembly order;
• current price, availability, and delivery times in the product card.

How to buy ST-020 or ST-020-1 from STAVROS

First, make a scale plan of the room. Draw the outline of 1930 × 1128 mm and a separate square of 1128 × 1128 mm. Add real chairs, open doors, kitchen cabinets, and main routes. This layout will immediately show whether it's worth paying extra space for a larger surface or if a compact model solves the problem better.

For a large family table, you can Buy rectangular tabletop ST-020 и Buy table base for tabletop ST-020. For a compact square set — Buy square tabletop ST-020-1 и Buy table base for tabletop ST-020-1.

The material is chosen after the shape. For dense solid enamel, MDF is suitable. For visible texture, a combined version with solid wood and oak or beech veneer is used. Before payment, you need to check the product card because current options, price, and availability may change.

For a buyer who wants to assemble the table themselves, it is useful to study how to assemble a table from a tabletop and a base. The ready-made pair of STAVROS parts eliminates the accidental selection of incompatible blanks and bases, but the assembly diagram is still agreed upon before finishing.

FAQ: questions about ST-020 and ST-020-1

How is ST-020 different from ST-020-1?

ST-020 has a rectangular shape and dimensions of 1930 × 1128 × 30 mm. ST-020-1 is square, 1128 × 1128 × 30 mm. The difference in length is 802 mm.

Which tabletop has a larger area?

ST-020. Its area is about 2.18 m² versus approximately 1.27 m² for ST-020-1. The rectangular model is about 71% larger.

Which model should I choose for six people?

ST-020 with the STL-020 base is considered a table for about six people. Actual seating depends on the chairs and base design.

Which model is suitable for four people?

ST-020-1 with the STL-020-1 base. The square shape allows one person to sit on each side.

Can six people sit at ST-020-1?

For regular use, this is not the primary scenario. Additional chairs may be cramped and conflict with the base. A layout with actual chairs is needed.

Can ST-020 be used for four people?

Yes, but the table will take up more room than necessary. Such a choice is justified if you need extra surface area or often have guests.

What shape should you choose for an elongated room?

Usually rectangular ST-020. It supports the longitudinal axis of the room if there are clear walkways around it.

Which tabletop is suitable for a square room?

ST-020-1 is easier to center and surround with equal walkways. But the exact solution depends on other furniture and doors.

Do both models have the same thickness?

Yes, the confirmed thickness is 30 mm.

What to choose for white enamel?

MDF construction. It is designed for opaque finishes and does not require preserving the wood grain.

How to get an oak texture?

Choose a combined option with MDF, solid wood, and oak veneer. This is not a solid oak tabletop.

Is there a version with beech veneer?

Yes, both models are available in a combined version with MDF, solid wood, and beech veneer.

Can a veneered tabletop be called solid?

No. The construction is combined. The presence of solid wood and natural veneer does not make the entire panel a solid piece.

Which underframe fits ST-020?

STL-020 is recommended, size 1900 × 1100 × 750 mm. Before assembly, check the drawing, fastening, and completeness.

Which underframe fits ST-020-1?

STL-020-1, size 1100 × 1100 × 750 mm.

Can another base be used?

Only after an engineering check of dimensions, supports, fastening, stability, and fit. Matching the external dimensions is not enough.

How much space should be left around the table?

You need to allow for chair movement and passage. Approximately, seating requires about 750–900 mm, and passage behind seated people requires more, often about 1000–1200 mm. Actual chairs and layout may require different allowances.

How to check delivery?

Measure the entire route: entrance, elevator, stairs, turns, corridor, and room door. Packaging must also be considered.

Is the exact weight of the tabletops known?

The weight is not specified in the confirmed data. It needs to be clarified for the specific material before organizing lifting and installation.

Can the models be used as kitchen worktops?

Not without separate confirmation. These are furniture tabletops for a dining table, not panels for a sink and hob.

Is the underframe included with the tabletop?

The completeness should be checked on the product page. The tabletop and underframe have separate product pages and must be consciously included in the order.

Is finishing required after purchase?

The material is chosen for enamel or tinting. The specific finish and work order must be coordinated with the workshop and checked in the product card.

Where can I see other sizes?

You can view square and rectangular tabletops in the general category.

What should you check right before payment?

Size, shape, material, finish, base, mounting, number of chairs, passages, delivery route, completeness, and current card conditions.

Result: ST-020 for space and six seats, ST-020-1 for symmetry and four

ST-020 and ST-020-1 have the same classic profile, thickness of 30 mm, and the same material logic, but are designed for different scenarios. The rectangular ST-020 measuring 1930 × 1128 mm provides about 2.18 m² of surface and suits a large dining group of approximately six people. The square ST-020-1 measuring 1128 × 1128 mm occupies about 1.27 m² and creates a compact table for approximately four people.

You need to choose based on the room, not the photo. Check passages, chairs, serving space, base, and delivery route. For solid enamel, MDF is rational. For visible texture, combined versions with oak or beech veneer are suitable. They cannot be called solid wood.

on the Stavros website you can Buy rectangular tabletop ST-020 for a spacious dining room or Buy square tabletop ST-020-1 for a compact symmetrical area. Confirmed bases help assemble a set without accidental size mismatches, and the final finish and mounting should be coordinated before placing the order.