Two bedside tables stand mirror-image: how to order a wooden rosette R-063L and its pair R-063R so that the water lilies face the bed

A square socket 80×80 mm may have the wrong side even when the size is chosen perfectly.

The reason is in the R-063 pattern itself. It is not a symmetrical geometric piece that can be turned to any side without consequences. R-063L and R-063R have a directional carved motif with a stylized water lily: the stem, leaves, and flower create movement that, on two bedside tables, either gathers the composition toward the bed or turns it outward.

Therefore, it is not enough for the buyer to write in the order:

R-063L — 1 pc., R-063R — 1 pc.

This is the correct set of article numbers for a mirror pair, but it still does not specify which particular part should be on a specific cabinet.

The most reliable specification contains four things at once:

• separate article number R-063L;

• separate article number R-063R;

• front view of two cabinets with a bed between them;

• caption: "when viewed from the front, both water lily motifs are directed toward the central axis of the bed."

This is especially important because the description of the R-063L card mentions the designation R-063R. The presence of two separate cards and L/R orientations is confirmed, but trying to independently interpret the letter as "part for the left cabinet" is a weak way to order. Left and right can be described relative to the product itself, the pattern, the observer, or the catalog orientation. The final appearance is best fixed with an image.

At the time of verification, the cards confirm two sizes for both orientations:

• 80×80×20 mm;

• 110×110×27 mm.

Material:

• beech;

• Oak.

Grinding quality:

• "Standard";

• "Prestige".

Average production time for custom orders is 5–10 days.

For two nightstands, a pair of the same configuration is purchased:

1 × R-063L + 1 × R-063R.

The following must be identical:

• size;

• wood species;

• sanding quality;

• surface preparation;

• future finish.

If the orientation has already been agreed upon in the sketch, you can buy the wooden rosette R-063L and simultaneously order a mirrored rosette R-063R as one paired composition.

Wooden Newel R-063L

from 17.57 $

Wooden Rose R-063R

from 17.57 $

Go to Catalog

Wooden rosette R-063L and carved rosette R-063R: what exactly the customer orders

R-063L and R-063R are two orientations of asymmetric wooden decor with a stylized plant motif.

The cards attribute the product to the Art Nouveau style. In the task at hand, this is not just a decorative characteristic. The floral pattern has a direction, so two identical squares can look fundamentally different in a mirrored furniture composition.

Watch video ...

Size 80×80×20 mm

This is a compact version.

It takes up less of the facade's front area and leaves more free space around:

• furniture handle;

• edges;

• panels;

• moldings;

• adjacent drawer.

A depth of 20 mm means this is a true three-dimensional relief, not a flat appliqué. Simply placing a paper square of 80×80 against the facade is not enough: it shows the area, but it does not show how far the relief protrudes relative to the handle and fingers.

Our factory also produces:

Wooden bracket KR-069

from 66.36 $

Wooden pilaster PLM-020

from 60.14 $

Wooden Decor N-463.1

from 97.96 $

Decor Set C-054

from 368.78 $

View Full Product Catalog

Size 110×110×27 mm

Along the side, it is 30 mm larger.

By the area of the front square:

80×80 = 6400 mm².

110×110 = 12,100 mm².

Ratio:

12 100 / 6400 ≈ 1,89.

That is, the large option takes up almost 1.9 times more face area.

The depth increases:

27 − 20 = 7 mm.

This changes:

• visual weight;

• own shadow;

• interaction with the handle;

• risk of hand contact;

• requirements for a flat facade field.

Beech

Beech is rational when the natural wood grain is not the main artistic element or the part is planned for covering enamel.

Oak

Oak is chosen when a more pronounced natural texture is needed or the project is based on oak furniture and transparent/tinted finishes.

But the card in the verified configuration shows preparation for enamel. If the project requires visible wood texture, the necessary preparation must be confirmed separately before ordering.

"Standard"

In the source material, "Standard" is described as machine preparation, after which the craftsman can additionally refine the surface for a specific finish.

"Prestige"

"Prestige" involves more detailed manual sanding.

For a pair, it is important not to mix levels: one L in "Standard" and one R in "Prestige" is a bad specification, even if it seems that everything will be hidden after painting.

Why two identical R-063L or two R-063R do not create a mirror pair

Let's imagine two nightstands on either side of the bed.

Each has the same R-063L installed.

If the pattern of one piece is directed toward the center, the pattern of the second will maintain the same orientation in space. The result will be a repeat, not a mirror.

This is a fundamental difference.

Repeat

Both motifs are directed the same way:

→ →

This way, you can build rhythm on a long facade, panel, or cabinet.

Mirror pair

Motifs are directed towards each other:

→ ←

or diverge:

← →

In a bedside composition, one of these two options is usually considered.

Why a 180° rotation does not replace mirror orientation

The square shape creates the illusion that the element can simply be rotated.

But when rotated 180°:

• the top becomes the bottom;

• the stem line changes direction;

• the flower ends up in a different part of the square;

• The overall pattern does not become a mirror image.

Geometrically, "rotate" and "mirror" are two different operations.

Why a 90° rotation is even weaker

It changes the vertical/horizontal logic of the plant.

On two pedestals, this is already a different composition.

L and R cannot be automatically read as "left pedestal" and "right pedestal"

This is one of the main limitations of the article.

The letter in the article number helps distinguish between two orientations of the product. But in furniture ordering, there are at least four possible "left/right" systems:

• left and right for a person standing in front of the bed;

• left and right for a person lying on the bed;

• left and right side of the facade itself;

• catalog L/R orientation of the pattern.

If at least two project participants use different systems, an error is almost guaranteed.

Example

The designer says:

“Place R-063L on the left.”

He may mean the left cabinet in the front view.

The installer looks from the bed and understands “left” the opposite way.

The article number may actually indicate the pattern orientation, not the furniture.

Solution

Eliminate verbal ambiguity.

On the sheet write:

FRONT VIEW FROM THE ROOM.

Next:

• bed;

• NIGHTSTAND A;

• NIGHTSTAND B;

• R-063L;

• R-063R;

• direction of the flower arrows.

Then it doesn't matter how each participant intuitively understands the word "left."

How to order R-063L and R-063R so that the water lilies are directed toward the bed

A front sketch is needed.

It can be very simple.

Step 1. Draw the bed

A rectangle in the center of the sheet.

Step 2. Draw two nightstands

left and right.

Step 3. Specify the viewpoint

Caption:

"Front view from the room / from the foot of the bed."

Step 4. Insert photos R-063L and R-063R

Not schematic letters, but real images of the products.

Step 5. Rotate them only to the standard vertical orientation

Do not mirror programmatically.

You need to see exactly what is being sold.

Step 6. Place arrows pointing to the central axis of the bed

For example:

flower → bed ← flower.

Step 7. Sign the article numbers under each part

This way the manager can confirm:

• this picture = R-063L;

• this one = R-063R.

Step 8. Fix the specification

R-063L — 1 pc.

R-063R — 1 pc.

Size — the same.

Material — the same.

Grinding — the same.

Orientation — according to the attached frontal sketch.

Why the phrase "water lilies toward the bed" is stronger than "L on the left, R on the right"

The first describes the visible result.

The second describes only the operation of placing the item.

If it suddenly turns out that the catalog uses a different L/R logic, the manager will see the contradiction before payment.

This is an important rule for any paired asymmetric products:

the specification should describe not only the SKU, but also the final orientation of the pattern.

Water lilies toward the bed or outward: which option is stronger for two nightstands

In the article's topic, the direction is already set — toward the bed. But it's useful for the buyer to understand the alternative, so they don't make a decision automatically.

The pattern is directed inward

→ BED ←

Effect:

• the cabinets are assembled into one group;

• the central axis is reinforced;

• the ornament "closes" the composition;

• the bed remains the main item.

Especially logical if:

• the headboard is symmetrical;

• two identical sconces;

• identical cabinets;

• the textile is built around the center.

The pattern is directed outward

← BED →

Effect:

• the composition visually expands;

• each cabinet becomes more of a standalone object;

• the direction can lead the eye to the side walls or sconces.

This can be stronger in a wide bedroom or with a very large headboard.

Why "to the bed" is not a universal rule

Because the decorative pattern works with the specific furniture.

But if the client has already chosen the internal direction, this requirement needs to be recorded as literally as possible.

How to check the direction without buying: paper mockup L/R

The cheapest test is two printouts.

Not just two squares

You need to print exactly the front pattern R-063L and R-063R.

Scale 1:1

For 80 mm — a square of 80×80.

For 110 mm — 110×110.

Why scale matters

On a small site card, the direction is readable, but the visual weight is not.

Apply to real cabinets

Not on a white wall.

Take a photo

At least three points:

• from the foot of the bed;

• from the entrance;

• from the side aisle.

Swap places

Even if the initial layout seems obvious.

Comparing two options often makes the decision much clearer.

Wooden socket 80×80×20 or 110×110×27 mm: the size is chosen based on the facade, not on a large photo

The difference between 80 and 110 mm seems small when the product is viewed separately.

On a cabinet facade, 30 mm on each side changes the entire composition.

Area of the front square

80×80:

6400 mm².

110×110:

12,100 mm².

The large version takes up approximately:

12,100 / 6400 ≈ 1.89 times

more area.

Depth

80-millimeter:

20 mm.

110-millimeter:

27 mm.

The difference:

7 mm.

This affects not only the shadow. When opening the drawer, the hand can physically pass closer to the relief.

Why you can't choose the size based on one cabinet

Two mirrored cabinets are perceived as a pair.

On one, a large decor can look expressive.

When a second identical socket appears nearby, the composition becomes almost twice as active.

Therefore, the 80 and 110 mm templates are tested on two facades at once.

How to make a volumetric template R-063 without the socket itself

Flat paper shows width.

It does not show depth.

For a full fitting, it is better to make a simple mock-up.

For 80 mm

Cut out a square 80×80 mm.

Place a layer of material about 20 mm thick underneath.

For 110 mm

Square 110×110 mm.

The depth of the mock-up is about 27 mm.

What to check

• front view;

• side view;

• handle grip;

• drawer opening;

• distance to the facade edge;

• distance to the adjacent molding;

• light and shadow from the sconce

Why the mockup doesn't replace the decor itself

It doesn't show the carving.

But it shows the scale perfectly.

Which size R-063 to choose for a narrow bedside table

First, you need to know the actual width of the flat field.

Let's say the facade is 360 mm.

The handle is in the center.

The frame or panel takes up part of the area.

The remaining free square may be smaller than it seems from the overall dimensions.

Example

Flat field:

140×140 mm.

R-063 110×110 leaves:

140 − 110 = 30 mm of total freedom.

When centering:

15 mm on each side.

This is a very tight composition.

R-063 80×80:

140 − 80 = 60 mm.

By:

30 mm on each side.

Visually calmer.

But 30 mm is not the norm.

This is just a calculation example.

The actual indent is chosen based on the furniture.

What size to choose for a wide cabinet

If the facade has a large smooth field, 80 mm may get lost.

For example, a field of 260×260 mm.

An 80-millimeter socket takes up in width:

80 / 260 × 100 ≈ 30,8%.

110-millimeter:

110 / 260 × 100 ≈ 42,3%.

The larger option becomes more noticeable and better supports massive furniture.

But if nearby there are:

• a large handle;

• decorative baguette;

• wall sconce;

• carved headboard,

110 mm may overload the facade.

Carved rosette and furniture handle: where the functional boundary lies

The decorative rosette should not become an obstacle for the hand.

In everyday use, a person:

• approaches the cabinet;

• grabs the handle;

• pulls the drawer;

• sometimes does this in the dark;

• Touches the facade with the side of the hand.

If R-063 protrudes by 20 or 27 mm, it becomes a physical object in the gripping zone.

What to check

With the drawer closed:

• take the handle;

• open;

• close;

• repeat several times.

The hand must not:

• hit against the relief;

• catch on the petals;

• rest on the rosette;

• use it as a random gripping point.

If the handle is centered

There are several schemes:

• R-063 above the handle;

• below;

• on another box;

• on a blank panel.

If the handle-bracket is wide

It's better not to place decor too close to its arc.

If the handle-button is small

The socket may visually dominate.

Need to check whether the handle seems like a random dot inside a large relief.

Can a furniture handle be placed directly through R-063

Not automatically.

The card positions R-063 as a decorative wooden rosette.

It does not confirm:

• standard hole;

• calculation for force load;

• use as a backing for a handle.

Risk

Drilling may pass through a thin section of the thread.

With daily opening, the load from the handle is transferred to the decor.

The right way

If the designer wants a handle in the center of the rosette:

1. create a drawing;

2. check the thickness;

3. determine the drilling location;

4. evaluate the power scheme;

5. coordinate with the furniture maker.

Without this, it is better to separate the handle and the decor.

Push-to-open and R-063: why the absence of a handle does not cancel ergonomics

On a handleless facade, the decorative rosette gets more free space.

But the user presses the facade with their hand.

If the press zone coincides with R-063, the part turns into a push pad.

This is undesirable without a special calculation.

What to do

Determine the working zone of push-to-open.

Place the rosette:

• higher;

• below;

• to the center of another field.

Why R-063 should not be placed too close to the edge of the facade

The carving has its own depth and thin sections.

Proximity to the edge creates three problems at once.

Visual

The decor looks cramped.

Installation

Glue may seep out to the edge.

Operational

When touched by hand or during cleaning, the side edge gets more risk.

How to choose the offset

According to the full-size template.

The card does not provide a universal number.

Two cabinets with different fronts: can R-063L/R be used

Sometimes cabinets are mirror images in position, but not identical in construction.

For example:

• the left one has one drawer;

• the right one has two;

• one is wider due to the wall;

• the second is narrower due to the door.

Then the mirror pair R-063 may lose its meaning.

What to check

Is there an equivalent decorative field on both cabinets.

If not, the same size R-063 can look different.

Possible solutions

• abandon the pair;

• use one motif as a single accent;

• change furniture dimensions;

• choose another decor.

Two identical nightstands, but different sconces: how this affects the direction of water lilies

If the sconces are not mirrored but different, the internal orientation of R-063 can still maintain the central axis of the bed.

But the composition is no longer fully symmetrical.

In such an interior, you need to decide:

• sockets gather the center;

• or repeat the direction of each light fixture.

The main thing is not to make a decision just because L/R SKUs exist.

Water lily as a directional motif: what exactly the eye perceives

Asymmetric carving has several guiding elements:

• the stem;

• the curve of the leaves;

• the position of the flower;

• empty areas around the design.

Sometimes the main element is not the flower itself, but the overall diagonal.

Therefore, the arrow on the sketch should not indicate an abstract 'L/R'

It is better to mark:

'the main movement of the ornament toward the center of the bed'.

So the manager and the designer look at the same result.

How to check mirror symmetry using a photo

After receiving the pair, there is no need to glue it immediately.

Step 1

Place L and R on the floor in the same orientation as on the facades.

Step 2

Place a rectangle between them to represent the bed.

Step 3

Take a photo from above.

Step 4

Compare with the approved front sketch.

Step 5

Only after matching, proceed to finishing.

This is a simple incoming check that eliminates expensive rework after painting.

Why the L/R marking cannot be removed until installation is complete

After sanding, primer, and enamel, two parts can look very similar.

If the original marking is lost, the installer will start determining the direction "by the pattern."

On a simple motif, this is possible.

On complex carving, a mistake is real when in a hurry.

Practice

Before finishing, make temporary safe marks on the back side:

• T1-L;

• T2-R;

Or:

• LEFT CABINET;

• RIGHT CABINET.

Why it's better to label the cabinet itself, not just L/R

This eliminates re-interpretation of the letters.

Oak or beech: the material of the pair is chosen once

Cannot order:

• R-063L beech;

• R-063R oak;

even if after enamel it seems there will be no difference.

The wood species differ:

• structure;

• density;

• reaction to finish;

• pattern.

For paired furniture, one material is needed.

Beech under enamel: when it is a rational choice

If the sockets are fully painted, the natural texture is not the main argument.

Beech may be more cost-effective.

What to check

Not just the enamel color.

You need to see:

• depth of the relief;

• shadow;

• quality of recesses after coating.

A too thick layer can visually soften fine details.

Oak: when it is needed specifically as visible wood

Oak is more justified if:

• oak bedside tables;

• wooden headboard;

• decor remains under a transparent/semi-transparent finish;

• The texture should be part of the ornament.

But there is an important limitation

The verified card shows the selected configuration "under enamel."

If the project requires a transparent finish, the corresponding preparation needs to be clarified separately.

Why two oak R-063 pieces may look slightly different

Natural wood is variable.

Even paired pieces can differ:

• shade;

• by grain;

• by the direction of the grain.

This is not necessarily a defect.

How to make a pair calmer

Before toning:

• place L and R next to each other;

• evaluate the face sides;

• choose a compatible finish;

• if possible, coordinate the selection of parts.

"Standard" or "Prestige": how to calculate not only the price, but also the work

Pair R-063 is not bought in a vacuum.

After receiving it, it needs to be finished.

"Standard"

Below is the price of the product.

More manual finishing may be required.

"Prestige"

The price is higher.

More detailed preparation can reduce the master's time.

Correct comparison

C total = pair price + preparation + finishing + installation.

Not:

"Standard is cheaper — so it's more profitable."

If the workshop charges a significant amount for manual thread finishing, "Prestige" may be economically stronger.

How much does a pair R-063L + R-063R cost in each configuration

For a mirror composition, two parts of the same configuration are needed.

Therefore, the budget is calculated not per single card, but per pair at once.

As of 31.08.2026, the source material confirms the following prices:

The price may change, so it needs to be rechecked in the product cards before payment.

The most affordable option

Beech 80×80×20, "Standard":

1 440 × 2 = 2 880 ₽.

The most expensive of the confirmed options

Oak 110×110×27, "Prestige":

2 470 × 2 = 4 940 ₽.

Difference

4 940 − 2 880 = 2 060 ₽.

This difference comes from three decisions at once:

• larger size;

• oak instead of beech;

• "Prestige" instead of "Standard".

Therefore, 2,060 ₽ should not be perceived as an extra charge only for a "prettier socket".

How to break down the price by solutions

It's useful to look not only at the total.

Beech 80 mm: "Standard" → "Prestige"

3,440 − 2,880 = 560 ₽ per pair.

Oak 80 mm: "Standard" → "Prestige"

3 620 − 3 160 = 460 ₽.

Beech 110 mm: "Standard" → "Prestige"

4 300 − 3 500 = 800 ₽.

Oak 110 mm: "Standard" → "Prestige"

4 940 − 4 240 = 700 ₽.

Beech → oak at 80 mm, "Standard"

3 160 − 2 880 = 280 ₽.

Beech → oak at 110 mm, "Standard"

4 240 − 3 500 = 740 ₽.

These calculations help to ask the right question.

For example:

Is oak texture more important if the product will be fully painted anyway?

If not, beech may be more rational.

Why the price of a pair should be calculated before choosing the size

If the buyer first fell in love with the large 110-millimeter pattern, and then discovered that the facade is too small, the price calculation was meaningless.

Correct order:

1. facade field;

2. handle;

3. template 80/110;

4. L/R orientation;

5. material;

6. polishing;

7. price.

Buy wooden carved rosettes: when it is better to view the category before fixing R-063

If after the layout it turns out that the water lily motif is too active, there is no need to force R-063 to work just because the theme has already been chosen.

You can buy wooden carved rosettes after comparing other models.

When comparison is useful

• the facade is small;

• 80 mm is still large;

• the water lily conflicts with the handle;

• a symmetrical detail without L/R is needed;

• the furniture style is not Art Nouveau;

• a more geometric pattern is required.

When to return to R-063

If it is precisely the directional plant motif that makes the two cabinets part of the central composition.

Buy carved wood decor: when one pair of rosettes is not enough

General section to buy carved wooden decor useful if the bedroom is designed as a single decorative system.

For example, the motif can be repeated:

• on the headboard;

• on the panel;

• on the wardrobe;

• on the door;

• on the mirror frame.

But the repetition should be moderate.

Error

After choosing two R-063L/R, add:

• a baguette;

• overlays;

• pilasters;

• a few more rosettes

only because they are available in the catalog.

The right approach

Define one main decorative motif and at most a few secondary repeats.

Wooden frame K-059: when continuing the water lily motif is justified

The cards link R-063 with the carved molding K-059 from the same collection.

Therefore buy wooden frame K-059 logical only after a pair of rosettes has already been resolved.

What K-059 can do

• create a frame;

• continue the plant motif;

• connect the rosettes to the edges of the facade.

What it doesn't do automatically

• doesn't guarantee a seamless joint;

• doesn't scale to any facade;

• doesn't have to be of the same visual weight.

How to check

Add K-059 to the front sketch of the cabinet.

If after this the water lily is no longer a readable center, the baguette is redundant.

When K-059 enhances the R-063L/R pair

Large cabinet

A large smooth surface can support an additional frame.

Headboard with similar carving

Then the motif gains architectural connection.

Simple handle

The hardware does not compete with the carved decor.

When K-059 overloads

• the facade is small;

• decorative handle;

• there is a panel;

• large sconces;

• the headboard is already carved.

Paired composition R-063L/R and sconces: how not to create four competing centers

Each nightstand may have:

• socket;

• handle;

• the sconce.

By the bed — the headboard.

If every element is actively decorated, the bedroom gets too many focal points.

How to set priorities

For example:

1. the bed is the main object;

2. the sconces are a secondary pair;

3. R-063 is a local motif;

4. the handles are neutral.

Or vice versa:

1. carved nightstands;

2. calm sconces;

3. a simple headboard.

Why 80 mm size is sometimes stronger than 110

Smaller decor leaves hierarchy.

Larger is not always more expressive in a good sense.

Light from above and side: why L/R may seem different even with the same finish

Relief is mirrored.

With side light, one detail gets light on some edges, another on opposite ones.

Therefore, a mirrored pair may look slightly different in tone.

This is a normal light-shadow effect.

How to check

Temporarily place volumetric templates or finished parts.

Turn on both sconces.

Look:

• from the center;

• from the left;

• from the right.

What not to do

Try to compensate for the natural difference in light with different shades of paint on L and R.

The finish should be the same.

If one sconce is brighter than the other

The pairing is broken not by decor, but by lighting.

Before blaming R-063 for different perception, check:

• lamp wattage;

• light temperature;

• angle;

• position of the lampshade.

How to choose the height of outlets on two facades

Both parts must be on the same visual line if the furniture is identical.

What to measure from

Not from the room floor.

Better from:

• the top edge of the cabinet;

• the top edge of the front panel;

• the center of a specific drawer.

Why the floor is a bad base

Cabinets may stand on carpets of different thicknesses or the floor may have a slight slope.

For the furniture itself, its own coordinate system is important.

If the facades have a frame or panel

R-063 should account for the inner field.

Do not place the relief so that it crosses:

• the frame profile;

• chamfer;

• a plane change.

Example

Inner field 180×180 mm.

R-063 110 mm leaves:

180 − 110 = 70 mm,

35 mm on each side when centered.

R-063 80 mm:

100 mm of total field,

50 mm each.

Both options can work.

Solves the scale in a pair.

If the nightstand has two drawers

There are several scenarios.

Outlet on the top drawer

Closer to the sconce and the bed.

On the bottom one

The decor lowers.

Between the drawers

Only if there is a stationary bar/field.

On the side panel

Already a different composition.

For the mirror theme, the article considers face fronts, because that is where the direction of the water lily is read relative to the bed.

If one nightstand opens with a door, the other with a drawer

The symmetry of the function is broken.

R-063L/R can still create a visual pair, but the mounting fields will differ.

Both structures need to be checked separately.

Why R-063 cannot be considered a "universal 80×80 overlay"

Terminologically, this is a wooden rosette.

Size does not determine function.

It differs from:

• handles;

• decorative washer;

• power plate;

• substrates;

• electrical outlet.

This is important both for the text and for the order.

How to check the quality of carved decor before finishing

Before processing, it is useful to check the quality of carved decor.

On the pair itself upon receipt, they check:

• matching dimensions;

• orientation;

• wood species;

• selected level of preparation;

• integrity of thin elements;

• absence of transport damage.

Why checking before priming is mandatory

After painting, it is harder to prove that the defect existed before the work.

How to compare "Standard" and "Prestige" on a real pair

If there is an opportunity to see samples:

• compare the petals;

• recesses;

• edges;

• readiness for finishing.

Do not evaluate only the smooth outer surface.

The main handwork is evident precisely in the complex relief.

How to finish R-063L and R-063R so that the mirror pair does not fall apart in color

Pairing can be lost even after a correct order.

If L and R are painted by different craftsmen, on different days, or with different batches of material, differences in tone and gloss may appear on the same relief.

Unified technological cycle

For the pair, it is better to:

1. accept both parts;

2. check orientation;

3. mark the cabinets;

4. prepare surfaces;

5. perform a test coat;

6. process L and R in one session.

Why the same color from the catalog does not guarantee the same appearance

The relief is affected by:

• layer thickness;

• primer;

• application method;

• interlayer sanding;

• finish gloss.

Recesses are especially sensitive

If one socket receives more material in deep areas, the pattern becomes visually softer.

This is noticeable on a mirror pair.

Covering enamel: how to keep the carving readable

The main mistake is trying to "level" the relief with a thick layer of coating.

R-063 is purchased specifically for its plasticity.

If the enamel fills small transitions, the flower loses detail.

What to do

Use the technology recommended by the manufacturer of the selected coating system.

Do not assign a universal layer thickness.

Test element

If possible, test on a wood sample or another carved piece of the same material.

Tinting and clear finish: what to clarify before purchasing

The verified card configuration shows preparation for enamel.

If the customer wants clear oak:

• clarify the availability of suitable preparation;

• request recommendations;

• Approve the sample;

• Do not consider "oak" as automatic permission to leave the wood without a covering finish.

Why this is important

Preparation for enamel and preparation for transparent coating may have different requirements for visual selection of wood.

How not to mix up the sides after painting

After enamel, factory markings may become invisible.

Marking on the back side is needed.

Good marking

R-063L / left nightstand / to the bed →

R-063R / right nightstand / ← to the bed

Why one letter is not enough

The installer may again interpret L/R differently.

The label "left cabinet" ties the product to specific furniture.

Installation of a wooden socket on the facade: first dry fitting, then glue.

The original article mentions assembly glue as an accompanying product.

But the presence of glue in the catalog does not turn it into a universal instruction.

Before fixing

Check:

• facade material;

• its finish;

• the back side of R-063;

• flatness;

• composition compatibility;

• setting time;

• method for removing excess.

If the bed is shifted relative to the wall

The water lilies may still be directed toward the bed, not toward the geometric center of the wall.

This is another argument to use the central axis of the bed in the sketch.

If the headboard is wider than the bed

The direction of the ornament can be linked:

• to the mattress;

• to the headboard;

• to the common central axis.

The most stable reference is the axis, not the edge of a specific element.

When the inward direction of the sconces looks too "closed"

In a small bedroom, two large 110mm sconces can draw the eye too strongly toward the center.

What to check

Compare:

• 110 mm inward;

• 80 mm inward;

• 80 mm outward.

Sometimes size matters more than direction.

When the outward direction is unexpectedly better

if:

• the bed is very wide;

• the nightstands are placed close to its edges;

• the sconces are positioned outward;

• The wall is long.

An ornament spreading to the sides can visually widen the composition.

But that is a different order scenario. The article's topic should not be substituted: here the final task is to direct the water lilies toward the bed.

How to check a pair in daylight and evening light

Carving is chiaroscuro.

In daylight, the relief may look soft.

In the evening, sconces create side shadows.

What to compare

• Are L and R read equally;

• Does one side seem deeper;

• Is the flower not lost;

• doesn't the pen create an extra shadow.

If the light is different

Do not change the position of one socket separately.

First adjust the lighting.

Why mirror products are better photographed in pairs before installation

The photo captures:

• orientation;

• color;

• size;

• location.

After installation, this becomes proof that the order was implemented according to the agreed scheme.

What to photograph

1. L and R next to each other.

2. The marking on the back.

3. Dry fitting.

4. Ready-made cabinets.

Acceptance of a pair after delivery: check not by individual card, but by sketch

The product may match the article number, but the customer must still ensure that the pair creates the desired look.

Check

• one R-063L;

• one R-063R;

• same size;

• one wood species;

• one sanding;

• identical preparation;

• motifs are oriented towards the bed according to the agreed scheme.

Before confirmation

Not:

• sand;

• paint;

• to drill;

• glue.

Check delivery conditions for wooden decor: why keep paired parts together

Before ordering, it is useful check delivery conditions for wooden decor.

For a pair, it is especially important to preserve the identification of the two items.

Upon receipt

Do not throw away:

• labels;

• packaging;

• Documents

until verification.

Why

If L and R are mixed up, it is easier to prove the error before interfering with the product.

Warranty and returns: check before individual finishing

Before sanding and painting, you need to check the warranty and returns.

Practical reason

After individual treatment, the condition of the item is already changed.

If a dispute arises due to orientation, it is better to detect it before irreversible work.

When it is worth buying the R-063L/R pair

The order looks justified if:

• the cabinets form a pair;

• the ornament is really needed;

• the direction towards the bed is approved;

• L/R checked against the frontal sketch;

• size selected by template;

• depth does not interfere with the hand;

• handle remains functional;

• material and sanding are the same;

• finish is coordinated;

• installation checked.

When R-063L/R is NOT yet needed to buy

No frontal sketch

The most dangerous situation.

The customer expects to "sort it out letter by letter"

Not enough.

Size not selected

80 and 110 differ significantly.

Handle not checked

The relief may interfere.

They want to drill for the handle

A separate project is needed.

One cabinet is still being changed

Pairing is not fixed.

Need clear oak, but preparation is not confirmed

Clarify first.

Deadline is critical, and 5–10 days production doesn't fit

Need to decide before payment.

Customer wants two identical orientations

This is no longer a mirror scenario.

Errors when ordering R-063L and R-063R for two bedside tables

Error 1. Ordering "two R-063" without separate item numbers

Why it happens: the buyer sees one pattern and thinks orientation is secondary.

Consequence: the order may end up with two identical sides.

How to prevent: write 1 × R-063L + 1 × R-063R.

Error 2. Read L as "left cabinet"

Why it occurs: natural association.

Consequence: the part is placed on the wrong facade.

How to prevent: front sketch with real images.

Error 3. Read R as "right cabinet" without checking

The same problem in the mirror.

Error 4. Order two R-063L and rotate the second one 180°

Why it occurs: the square shape seems universal.

Consequence: the top and bottom of the ornament change, the mirror does not work.

Error 5. Check orientation in top view

On the plan, the direction of the flower is hard to read.

How to prevent: only front view of facades.

Error 6. Not specifying the viewpoint

The phrase "left cabinet" is ambiguous.

Error 7. Choosing the size on one cabinet

In a pair, the decor may be too active.

Error 8. Considering 30 mm difference between 80 and 110 insignificant

In terms of area, the larger option is almost 1.9 times bigger.

Error 9. Checking only the flat template

Depth 20/27 mm remains outside the test.

Error 10. Place R-063 in the handle grip zone

The hand regularly touches the thread.

Error 11. Use R-063 as a handle

The card confirms the decor, not the hardware.

Error 12. Drill the center without a drawing

The carved motif can be damaged.

Error 13. Mix 80 mm on one cabinet and 110 mm on another

Even with the same pattern, the pair falls apart.

Error 14. Mix beech and oak

The finish and texture differ.

Error 15. Mixing "Standard" and "Prestige"

Surface preparation turns out different.

Error 16. Painting L and R on different days without a unified technology

Gloss/tone may diverge.

Error 17. Removing markings before installation

After enameling, sides are confused.

Error 18. Gluing the first socket before dry-fitting the second

Symmetry error is detected late.

Error 19. Using any mounting adhesive without testing

The facade finish may be incompatible.

Error 20. Consider K-059 a mandatory collection extension

The cabinet may be overloaded.

Error 21. Order transparent oak without specifying the preparation

The current card configuration is oriented toward enamel.

Error 22. Start finishing before checking L/R against the approved sketch

Returns and corrections become more complicated.

Error 23. Choose the direction based on the image file name

You need to look at the actual pattern.

Error 24. Attach the decor to the center of the wall, not to the cabinet

If the bed is shifted, the composition breaks.

Error 25. Considering mirror symmetry sufficient without checking light

One sconce can create another shadow.

Boundary scenario: both nightstands are identical, but one is flush against the wall

The left nightstand may have free side space, while the right one may be squeezed against the wall.

Outlets can still be placed symmetrically on the facades.

What not to do

Shifting one R-063 just because there is a wall nearby.

If the facades are identical, it is better to preserve their internal geometry.

Boundary scenario: one nightstand is 40 mm wider

Then two identical facade centers are not at the same distance from the bed.

Possible solutions

Preserve the center of each facade.
The furniture looks internally correct.

Shift the smaller/larger socket for the room.
The pairing of facades weakens.

More often, the first path is more stable.

Boundary scenario: cabinets are mirrored, but handles are equally shifted to the right.

This happens with serial furniture.

Then the facades themselves are not mirrored.

What to do with R-063

Do not try to simultaneously repeat the handles and create a mirror.

Choose the main principle.

If the theme is water lilies by the bed, the decor can remain mirrored, and the handles can be perceived as a separate rhythm.

Boundary scenario: nightstands have different heights

For example, one next to a tall mattress, the second lower.

R-063L/R of the same size can still work if the position relative to the top edge is repeated.

But the overall composition is already asymmetrical.

What to check

Shot from the foot of the bed.

Not just local facades.

Boundary scenario: one nightstand with a door, the other with drawers

Then the point of daily contact differs.

On the door, the hand can pass from the side; on the drawer, in the center.

Conclusion

L/R orientation may remain mirrored, but mounting coordinates need to be checked separately.

Edge case: water lilies should face not the bed, but the sconce.

If sconces are outside the nightstands, the direction may diverge.

That is a different scenario.

The article cannot be used as proof that internal orientation is always correct.

Edge case: bed with an asymmetrical headboard.

For example, the headboard extends only to one side.

Mirrored R-063 can create a useful "counterbalance," but can also conflict.

A general facade layout is needed.

Edge case: two pairs of nightstands in a hotel project.

If there are many identical rooms, the L/R error scales.

What to do

Do not write "R-063 — 40 pcs." for 20 numbers.

Write:

• R-063L — 20 pcs.;

• R-063R — 20 pcs.

And attach one standard front sketch.

Why this is important

Completeness can be checked by the number of pairs.

If one R-063 is damaged after several years

A replacement of a specific orientation is needed.

Therefore, it is useful to keep in the furniture passport:

• article number;

• size;

• material;

• sanding;

• color;

• side of the cabinet.

Why just "R-063" is not enough

You can order the wrong mirror.

Do you need to buy a spare pair right away

For two home cabinets, this is usually not an obvious necessity.

A spare makes sense if:

• complex custom finish;

• commercial project;

• long lifecycle;

• reordering is problematic.

But two extra parts double the product budget for the pair.

The reserve needs to be justified.

If only one spare part is needed

Which one — L or R?

It is impossible to predict which one will be damaged.

One spare orientation covers only half of the risks.

Therefore, for a truly important reserve, a full L+R set is more logical.

How to create a production card for a pair

Main table check

All rows must match mirror-wise, except for the article number and pattern direction.

How to pass the task to an installer who did not participate in the selection

You cannot send only a link to the cards.

A package is needed:

• photo of the finished room;

• front sketch;

• marking of switches;

• article numbers;

• sizes;

• coordinates;

• photo of dry fitting.

Why

The installer should not re-make design decisions.

How to order a pair without confusion: a ready-made specification line

You can use the following wording:

R-063L — 1 pc. + R-063R — 1 pc. / size ___×___×___ mm / material ___ / sanding ___ / preparation ___ / mirror pair for two bedside tables / when viewed from the foot, both water lily motifs are directed toward the central axis of the bed / sketch attached.

Why this is a strong wording

It simultaneously fixes:

• SKU;

• quantity;

• configuration;

• the final visual result.

How to check the received pair in five minutes

1. Do not remove labels.

2. Place parts face up.

3. Open the approved sketch.

4. Place a conditional bed between them.

5. Check the direction.

6. Check the size.

7. Check the material.

8. Check the sanding.

9. Take a photo.

10. Only then pass to finishing.

Why this five-minute check is more important than an extra coat of varnish

A finish error is sometimes corrected by re-sanding.

An orientation error after gluing may require:

• remove the decor;

• restore the facade;

• order another part;

• repeat the finishing.

Checking before installation is cheaper.

How to make a decision on size, material, and sanding without mixing three different questions

The buyer often tries to solve everything in one phrase:

“I want a large oak R-063 in ‘Prestige’.”

This sounds complete, but in reality it describes three independent choices.

Size determines the scale

80 or 110 mm determine how much of the facade the decor occupies and how deeply it protrudes.

Material determines the base and wood grain pattern

Beech and oak work differently with finishes.

Sanding determines the degree of surface preparation

"Standard" and "Prestige" are not two different designs, but two levels of preparation.

Why decisions need to be made in order

If 110 mm physically doesn't fit, the "oak or beech" debate becomes meaningless.

If the product is completely covered with enamel, oak may not provide the visual value for which one pays extra.

If the workshop still performs its own manual finishing, "Prestige" should be compared with this technology, rather than chosen automatically.

Selection matrix R-063 for two cabinets

This is not automatic selection. The table shows which option to put in the layout first.

When 110×110×27 mm is definitely worth checking first

• facade is large;

• the handle is small;

• decorative free field;

• massive headboard;

• large sconces;

• the nightstand itself should be a noticeable item.

When 80×80×20 mm is more often safer

• narrow nightstand;

• expressive handle;

• the facade already has a frame;

• decor should be secondary;

• the distance between the handle and the socket is limited.

Production time 5–10 days: why it's better not to split a pair order

If one orientation is needed now, and the second is decided to be ordered later, a risk arises:

• another production cycle;

• another batch of wood;

• another finishing schedule;

• delay in installation.

Better

Order L and R simultaneously with one specification.

Especially for oak

Paired natural elements are easier to evaluate together.

If one side is ready before the other

Do not start finishing separately without necessity.

Better to wait for the full set and compare.

What to check before payment

Cards

Both separate items.

Sketch

Exists and is clear.

Size

identical.

Material

identical.

Sanding

Same.

Preparation

Suitable for the future finish.

Deadline

Fits the schedule.

Price per pair

Recalculated based on current cards.

When one R-063L/R can be purchased separately

If the project is truly a single one.

For example:

• one cabinet;

• one facade;

• asymmetric console.

Then a mirror pair is not needed.

But the topic of this article is different

For two mirror cabinets, a single purchase does not complete the composition.

Can R-063L/R be used not on the facade, but on the sides of the cabinets?

Decorative use can be considered if the structure allows it.

But then the direction of the water lilies should be assessed in a different plane.

The frontal scenario of the article ceases to be direct.

What to check

• visibility of side panels;

• direction toward the bed;

• protrusion 20/27 mm;

• risk of foot contact.

If the nightstands are placed flush against the bed

A socket on the inner edge of the facade may be less convenient.

It is better to check the relief near the hand and bedding.

If the nightstands are placed far from the bed

The internal direction of motives may lose connection.

Then the external orientation or a larger size sometimes looks stronger.

If one nightstand is near the door

The decor is visible from a different angle.

Do not change orientation just for a side view.

The main scenario is set by the frontal composition, if it is the priority.

If the nightstands will be replaced later

R-063 is glued to a specific facade and becomes part of the furniture.

If the furniture is temporary, expensive custom decor finishing may be impractical.

When the purchase is stronger

If the nightstands are designed for long-term use and are part of a permanent furniture set.

Why a new article should not turn into a general overview of wooden decor

The user came with a very specific task:

• two cabinets;

• one L;

• one R;

• water lilies for the bed.

All other sections are needed only to properly frame this pair.

As soon as the topic drifts into:

• the history of Art Nouveau;

• the entire catalog of carvings;

• general rules of classical furniture,

it loses commercial intent.

Control checklist for order R-063L/R

Before payment:

• two nightstands finally approved;

  
  

• front view prepared;

  
  

• viewpoint signed;

  
  

• central axis of the bed shown;

  
  

• R-063L present;

  
  

• R-063R present;

  
  

• direction of water lilies shown with arrows;

  
  

• pair size identical;

  
  

• material identical;

  
  

• grinding is the same;

  
  

• preparation confirmed;

  
  

• handles do not conflict;

  
  

• depth checked with mockup;

  
  

• mounting diagram determined;

  
  

• pair price is current;

  
  

• deadline confirmed;

  
  

• delivery verified;

  
  

• warranty/return verified.

  
  

Last practical check: which pair looks mirrored specifically on your furniture

Before paying, it is useful to conduct one test that combines size, orientation, and placement.

Make four paper templates:

• R-063L 80 mm;

• R-063R 80 mm;

• R-063L 110 mm;

• R-063R 110 mm.

Place the small pair first on the nightstands so that both motifs are directed toward the bed. Take a photo. Then replace it with the 110 mm pair without changing the axes.

What to compare in the two photos

Not just "which is prettier."

Check:

• how much free space remains around the thread;

• is the relief not approaching the handle;

• is the decor not becoming larger than the sconce itself;

• is the direction of the water lilies readable from a normal distance;

• does the bed remain the main center;

• do the two nightstands not seem excessively heavy.

If 80 mm reads too weakly

This is an argument for 110 mm only if there is free space available.

Do not increase the size if the larger version starts to interfere with the handle.

If 110 mm looks convincing from afar but interferes up close

Function is more important than scale.

A bedside table is used daily, so 80 mm may be more appropriate.

If both pairs look equally convincing

Then the choice can be shifted to budget and finish.

For example, direct the difference between 80 and 110 mm toward 'Prestige' or a more complex finish, if it truly improves the result.

Decision map before ordering R-063L/R

This table does not replace the mockup. It helps to understand at which exact step the solution is not yet proven.

Why the finished pair should be stored as a set until installation

After finishing, it's better not to put L and R in different boxes without marking.

For the project, one packaging unit is convenient:

R-063L + R-063R / bedroom nightstands / pair #1.

What this prevents

• loss of one side;

• mixing with another pair;

• incorrect issuance to the installer;

• re-deciphering of article numbers at the site.

For a serial project

If there are several pairs, mark:

• Pair-01 L/R;

• Pair-02 L/R;

• Pair-03 L/R.

This way the direction is preserved until installation.

If the R-063L card contains the designation R-063R: how to act without guessing

This fact is especially important for the final order.

There is no need to decide on your own that this is a typo and ignore it.

The correct reaction is:

1. open both separate cards;

2. save the front images;

3. attach them to the sketch;

4. ask to confirm which article number corresponds to each orientation;

5. save the answer together with the order.

This way, the potential ambiguity of the card text turns into a controlled procedure, not a risk of a wrong pair.

FAQ

How does R-063L differ from R-063R?

These are two orientations of one asymmetrical carved motif with a stylized water lily. Dimensions and material options match, the direction of the pattern differs.

Is it necessary to place R-063L specifically on the left cabinet?

No. The letter cannot be automatically equated with the furniture placement. A front sketch with the actual direction of the ornament is needed.

How to understand which piece should be on the left?

Place the official images of L and R on the layout of two cabinets and choose the pair where both motifs are directed toward the central axis of the bed.

Can I buy two R-063L?

It is possible for a repeating directional pattern, but for a mirrored pair this usually does not correspond to the task.

Can I rotate one R-063L by 180° and get R-063R?

No, rotation changes the top and bottom of the pattern and is not a mirror reflection.

What sizes are available?

80×80×20 and 110×110×27 mm according to verified cards.

Which version is larger in area?

110×110 takes up 12,100 mm² versus 6,400 mm² for 80×80 — almost 1.9 times more.

What size should I choose for a small cabinet?

First, check 80 mm with a full-size template. But the final answer depends on the facade field and the handle.

When should I choose 110 mm?

When the facade is large, smooth, and can handle a more active relief.

What wood are R-063L/R made from?

made of beech and oak.

What should I choose for a covering enamel?

It is often rational to consider beech if the natural texture will not be visible. But the decision depends on the workshop's technology.

Can oak be left natural?

It is necessary to separately confirm suitable preparation for a transparent/tinted finish, because the verified card configuration shows preparation for enamel.

What is "Standard"?

In the source material, there is machine surface preparation, which may require additional manual finishing.

What is "Prestige"?

More detailed manual sanding.

Can I order one L in "Standard" and R in "Prestige"?

For a mirror pair, it is not recommended. The preparation must be the same.

Can R-063 be used as a handle?

The card positions the product as decor. Using it as structural hardware requires a separate design solution.

Can a hole for a handle be drilled through the rosette?

Only after checking geometry and strength by a furniture specialist. There is no universal recommendation.

What is the production time?

Average lead time for custom orders is 5–10 days for verified cards.

How much does a pair of 80 mm beech in "Standard" cost?

2,880 RUB as of 31.08.2026.

How much does a pair of 110 mm oak in "Prestige" cost?

4,940 RUB for the same date.

Do I need to buy K-059 together with the sockets?

No. It is linked by collection, but it is only used if the facade really needs an additional line.

How to mount R-063 on the facade?

After a dry fit and checking the compatibility of the selected adhesive with the wood and the facade finish.

Do I need to check both parts before painting?

Mandatory. Article numbers, sizes, wood species, sanding, and orientation must be confirmed before irreversible finishing.

How not to mix up the sides after enameling?

Mark the back sides with reference to the cabinets, not just with L/R letters.

Which direction should the water lilies face in this article?

Toward the central axis of the bed when viewed from the front of the room.

Where can I see other wooden rosettes?

In the STAVROS carved wooden rosette category, if R-063 does not fit in scale or style.

Where can I check the current price?

In the individual cards for R-063L and R-063R before payment.

Final ordering algorithm for a mirrored pair

1. Place both nightstands in final positions.

2. Determine the central axis of the bed.

3. Take a frontal photograph.

4. Print R-063L and R-063R.

5. Check the internal direction of the water lilies.

6. Swap the images and compare.

7. Choose 80 or 110 mm.

8. Create a volumetric mockup with a depth of 20/27 mm.

9. Check the handle.

10. Check push-to-open, if present.

11. Check the offsets from edges and frames.

12. Choose birch or oak.

13. Select "Standard" or "Prestige".

14. Confirm preparation for the upcoming finish.

15. Calculate the price of the pair.

16. Create a front sketch.

17. Label the viewpoint.

18. Label two pedestals.

19. Specify 1 × R-063L.

20. Specify 1 × R-063R.

21. Add the phrase "both water lilies to the bed".

22. Obtain written confirmation of the item numbers.

23. Check the deadline.

24. Check delivery.

25. Do not remove marking upon receipt.

26. Compare the pair with the sketch.

27. Number the reverse sides.

28. Perform a single finishing cycle.

29. Do a dry fitting after the finish.

30. Glue the first part.

31. Check the overall appearance.

32. Install the second one.

33. Take a photo of the finished mirrored pair.

Conclusion

It makes sense to buy R-063L and R-063R not as two separate square sockets, but as one mirrored furniture composition.

The main mistake is deciding that the letter L automatically means the left bedside table, and R means the right one. For an asymmetrical floral pattern, this is too unreliable. The order must specify the final visual result: when viewed from the front of the room, both water lilies should be directed toward the central axis of the bed.

Basic specification:

1 × R-063L + 1 × R-063R.

Then both parts must match in:

• by size;

• by rock type;

• by sanding;

• preparation;

• to the finish.

The size is selected on both fronts simultaneously. 110×110 takes up almost 1.9 times more face area than 80×80 and protrudes 27 mm instead of 20 mm. Therefore, the larger version requires more free space and is checked more carefully near the furniture handle.

For a pair, a simple front sketch with real L/R images and arrows pointing to the bed is especially useful. It eliminates discrepancies between the designer, manager, cabinetmaker, and installer. After receiving the product, first lay it out according to the sketch, and only then paint or glue it.

As of 31.08.2026, the confirmed price range for the pair is from 2,880 ₽ for beech 80 mm in "Standard" to 4,940 ₽ for oak 110 mm in "Prestige". Price is not the main criterion: first, you need to confirm the size and orientation.

If R-063 fits in scale, the handle does not conflict with the relief, the material and finish are matched, and the manager has confirmed that the two part numbers correspond to the frontal sketch, the mirror pair is ready for ordering. Then the water lilies truly work as directional decor and bring the two nightstands together around the bed, rather than turning into two randomly identical carved pieces.