Buy wooden furniture handle Module HL-049: how to calculate the quantity for a wardrobe, chest of drawers, and drawers

You should not buy the wooden furniture handle Module HL-049 individually "by eye", but after counting all opening facades. One children's wardrobe may require two handles, a chest of drawers with four drawers — four or more, a bedside table — one or two, a desk — a few more. An error in one position disrupts the symmetry, color sequence, and unified pattern of the entire furniture.

Buy the Module HL-049 handle available in an unpainted version made of beech or oak solid wood. The confirmed size is 42 × 42 × 27 × 20 mm, the sanding is "Prestige", and the mounting kit is included in the price. The geometry resembles a construction set element, so the handle is especially suitable for a children's wardrobe, chest of drawers, bedside table, and desk drawers.

HL-049 without coating is suitable for a project where handles need to be painted to match the facades, assembled in a multi-colored sequence, or tinted together with oak furniture. A buyer who does not plan priming and finishing should compare it with HL-049M: the finished version has the same size, is made of oak, and is offered in white, brown, transparent, and black coating options.

The main formula is simple: the number of handles equals the number of facades and drawers plus handles for additional sections and a reserve. But wide drawers, double doors, symmetrical layout, and multi-colored painting require a separate calculation. Before drilling, also check the facade thickness, actual mounting scheme, screw length, and existing holes.

Buy the Module HL-049 handle Buy ready-made Module HL-049M Buy wooden furniture handles Select fasteners for handles Order handle layout

Go to Catalog

Confirmed specifications of Module HL-049

HL-049 without coating or ready-made HL-049M

Our factory also produces:

View Full Product Catalog

Basic formula for calculating quantity

First, they count not cabinets and chests of drawers, but all opening elements: hinged doors, pull-out drawers, drop-down panels, and separate sections. Each facade is assigned one or two handles.

The preliminary formula looks like this: total quantity = handles on doors + handles on drawers + handles on additional sections + reserve. After that, the number is checked against the furniture plan and color scheme.

Reserve is especially important for manual painting. A spare Module helps restore furniture after damage without trying to find another shape or match the shade after several years.

Example of calculating a set for a children's room

Why handles are counted by facades, not by furniture items

A cabinet can have two, four, or six doors, and a chest of drawers can have three to a dozen drawers. The name of the item says nothing about the number of opening points.

The correct calculation starts with a facade layout. On it, each door and each drawer is assigned a number, color, Module orientation, and number of handles.

Thus, the order turns into a specification, not an approximate purchase of a box of hardware.

When one Module is enough for a facade

One handle is suitable for a small door, a narrow drawer, and a section that is convenient to open from the center point.

On a chest of drawers with identical facades, one Module in the center creates a calm rhythm and simplifies marking.

The solution is checked by the weight of the contents, guides, and actual grip convenience.

When two handles are placed on a wide drawer

Two handles help distribute the force on a long facade and create a symmetrical decorative repetition.

This option is suitable for a wide bottom drawer for toys, a long section of a desk, or a large chest of drawers.

The quantity cannot be determined solely by width: consider the guide rail design, facade rigidity, and mounting zone positions.

Why two handles are not always more convenient

A child may pull only one side, causing the wide drawer to open with a skew.

If the guide rails are designed for central force, two grip points do not automatically provide an advantage.

Before ordering two Module handles for a facade, make a mockup and check the movement of the loaded drawer.

How to calculate handles for a two-door cabinet

Two doors usually get one handle each — two Module handles in total.

They are installed at the same height, at the same distance from the central gap, and in the same orientation.

Before drilling, open the doors toward each other and check if protruding parts collide.

Cabinet with upper and lower sections

A tall cabinet may have separate mezzanine doors and lower drawers.

Each section is counted separately: two main doors, two upper doors, and, for example, two lower drawers give six handles before reserve.

The Module height on upper fronts must remain accessible to the user for whom the furniture is intended.

Cabinet with four doors

Four doors usually require four handles, but the center and outer pairs may have different positions relative to the edge.

Marking is done not from the room wall, but from the geometry of each front.

The same template transfers the distance from the edge without accumulating error.

How to place handles on paired doors

First mark the central gap, then two mirror installation points.

If the Module has a noticeable grain direction, the handles are turned identically or mirrored according to the approved scheme.

Random rotation of one part disrupts the rhythm more than a slight difference in wood shade.

How to check the height of handles on a children's wardrobe

The handle should be accessible to the primary user, but a specific height cannot be assigned universally.

Several options are marked on a paper template, and the grip is tested in the actual room.

Also consider the furniture height, lower drawers, and the possibility of an adult using the wardrobe.

How to calculate handles for a chest of drawers with four drawers

The basic option is four Modules, one for each front.

If the bottom drawer is noticeably wider or heavier, it is checked separately for one or two handles.

For identical geometry, a template is used that transfers the center point to all four fronts.

Chest of drawers with drawers of different widths

Narrow top drawers can get one handle each, the wide bottom one gets two.

Then the total number is greater than the number of drawers, and the simple formula requires adjustment.

The facade diagram indicates not only the quantity but also the distance between paired modules.

How to find the center of the drawer

Measure the visible width and height of the facade, not the inner box.

The center is marked by the intersection of two axes and checked against the position of guides and fasteners on the reverse side.

If the handle is not placed in the center, the offset must be the same across the entire series.

Why you cannot rely on the edge of the cabinet

The facade may have an overlay, gap, or offset relative to the side panel.

Marking from the body will lead to different offsets on adjacent drawers.

The template is built from the visible edges of each facade.

Marking of four identical drawers

A control point is created on the first facade and checked visually.

After confirmation, a rigid template is made from plywood, plastic, or thick cardboard.

The template is applied with the same side to avoid mirror offset.

How to avoid drilling into the guide or fastener

Before drilling, the drawer is removed and the back side of the facade is inspected.

The Module mounting point must not coincide with the facade fixing screw, metal side panel, or guide system.

If a conflict arises, the handle position is adjusted before painting and drilling the entire series.

How to calculate handles for a cabinet

A cabinet with one door requires one handle. If there is a drawer on top, the total count increases to two.

Door and drawer modules can be on the same vertical axis or have different logic per project.

The main thing is to check the ease of opening and not place the handle too close to the countertop.

Cabinet with two drawers

Two identical facades usually get two handles.

With a multi-color scheme, they can be different, but the order should be repeated on other furniture in the room.

It is better to order a spare part in each complex color if the shades are prepared manually.

How to calculate handles for a desk

Count each pull-out facade: pencil drawer, side cabinet, central section.

In the example with three drawers, the basic order is three Module.

The long central drawer is checked for one or two handles considering the opening direction.

Handle on the narrow pencil drawer

A small front is easier to open with one handle in the center.

The Module size 42 × 42 mm should be applied to the actual drawer so it doesn't look too large.

A paper mockup shows the scale before drilling.

Handles on the side cabinet of the desk

A vertical group of three drawers should have consistent spacing and orientation.

If the desk and dresser are in the same room, the color sequence can be repeated.

This way, individual items are perceived as a set, even if their fronts differ.

How to count handles for the entire children's room

Make a list of furniture, then break down each item into doors and drawers.

For each facade, specify one or two handles, material, color, and orientation.

After the total, add a reserve and check if internal sections, pull-out drawers, and mezzanines are not forgotten.

How to create a specification

The table needs the facade number, furniture item, article HL-049, material, color, quantity, and mounting orientation.

For a wide drawer, add the distance between two handles.

The specification is passed to the furniture maker, painter, and installer so everyone works from the same scheme.

Why buy a spare handle

The reserve protects against accidental damage during painting, drilling, or use.

After a few years, the shade of a new batch of wood and enamel may differ.

For a small single-color set, one spare part is usually enough, but the final number is chosen by the customer.

When two spare Modules are needed

Two spare handles are useful for a large series, a commercial facility, or a multi-color scheme.

One part can serve as a test sample, the second as a real spare.

If there are several colors, the reserve is distributed among the most complex shades, rather than simply adding two identical ones.

How to order handles in one batch

Ordering simultaneously helps preserve a similar wood texture and uniform preparation.

This is especially important for oak under a transparent tint.

The quantity, material, and finish are fixed before the finishing of all furniture begins.

What to do if one handle is lost

They preserve the article number, color sample, and coating data.

When reordering, the new Module is compared with the old furniture before installation.

If there is no exact match, sometimes it is more rational to repaint the spare group or replace the handles on one individual item.

One color on all furniture

A single color makes the wardrobe, chest of drawers, nightstand, and table visually connected.

White handles can blend with light facades and only show due to relief, while natural oak creates a warm repetition on different items.

This scenario is simpler in specification and subsequent repair.

Multi-colored Module set

The geometry of the construction kit allows for a playful color scheme: each drawer gets its own shade, and the sequence repeats on the wardrobe and table.

Colors cannot be distributed randomly after painting. First, a facade layout is created and each part is assigned a number.

For a complex palette, it's useful to order additional handles for test swatches.

How to repeat a sequence of colors

Suppose a dresser gets yellow, blue, white, and green Modules from top to bottom.

On the table, you can repeat the first three colors, and on the cabinet, use two main shades.

Repetition creates a system, not a set of random bright spots.

Gradient layout

Shades are arranged from light to dark along the height of the dresser or from the center to the edges of the cabinet.

This scenario requires precise labeling because swapping two handles will disrupt the transition.

It's better to approve the gradient based on physical swatches under the room's lighting.

One accent color

All handles can be made in oak or white, and one Module on the central drawer can be made bright.

An accent only works when it is paired with another item: a lamp, textile, or wall finish.

It is better to keep a spare part for the accent color separately.

Handle color matching the facade

The handle retains its shape but does not create a sharp contrast.

This approach suits a calm children's room, where the play theme is expressed through geometry rather than a palette.

For an exact match, the beech and facade are painted according to one approved sample.

Contrast handles on a white cabinet

Oak tinting or rich enamel makes the Module well visible.

Contrast requires particularly precise marking: even a slight misalignment is noticeable.

Before ordering, the handle is compared not only with the facade, but also with hinges, legs and other fittings.

Beech for colored enamel

Beech in version HL-049 is offered for opaque finishing.

It is chosen for white, yellow, blue or other project enamel when the texture should not determine the appearance.

The specific paint must be confirmed by the manufacturer for furniture use; the article does not guarantee coating safety without documentation.

Oak under tinting

Oak is suitable for a project with visible wood texture.

Tinting is associated with facades, countertops, legs or flooring.

Natural variability means that all handles will not be absolutely identical in pattern.

Oak handles on MDF

This combination emphasizes the natural detail on a smooth painted facade.

The mounting must match the thickness and construction of the MDF.

The color of the oak is checked against the finished enamel, not against a separate sample.

Beech handles on painted furniture

Beech is conveniently finished with the same opaque color as the facade, or a contrasting enamel is used.

The mounting hole is protected from excess primer and paint.

All parts of one series are painted using the same technology.

Why unpainted HL-049 cannot be called finished

The card directly indicates delivery without painting.

Prestige sanding means a prepared surface, but not a protective finish.

Before installation, the buyer must select the finish and wait for the coating to dry completely.

How to make a test paintout

One Module or a separate sample of the same wood species is primed and painted according to the future system.

The swatch is examined on the facade in daylight and evening light.

After approval, the color code, gloss level, and number of coats are recorded.

How to avoid different shades on twelve handles

All parts are painted with one batch of composition and in the same sequence.

They are marked so as not to confuse colors and furniture sections.

For oak, the direction of the fibers and the absorption of the stain can still give natural differences.

How to hold the handle when painting

A temporary technological support is needed that does not damage the front surface and does not fill the mounting hole.

The method depends on the actual fastening scheme.

Do not screw in a random screw of excessive length or diameter.

Paint before or after installation

Handles are easier to finish separately: all side edges are accessible and there is no risk of staining the facade.

After installation, only a neat local touch-up remains if necessary.

Painting an already installed Module complicates protecting the furniture and the installation joint.

How to protect the hole from paint

A thick layer can alter the fit of the fastener or make tightening difficult.

The hole is temporarily protected using a method compatible with the finishing technology.

After removing the protection, check that no drips remain on the edge.

Matte or semi-gloss enamel

Matte finish looks calmer and emphasizes minor marks less.

Semi-gloss highlights the Module geometry more and bonds easier with traditional furniture enamel.

The gloss level is chosen together with the facade, not separately from it.

Transparent oak coating

The finished HL-049M is offered in a transparent version, while the unpainted oak HL-049 can be finished according to your own project.

Transparent finish preserves the wood grain and makes each handle slightly unique.

The buyer must be prepared for natural variability, not expect plastic repetition.

White HL-049M

The finished white version reduces the stage of self-finishing.

Its shade should be compared with the facade: "white" does not automatically mean matching any furniture enamel.

Before ordering, you can buy a ready-made handle Module HL-049M after checking the color and configuration.

Brown HL-049M

The brown coating complements wood and classic furniture shades.

On a children's facade, it can become a calm contrast to light enamel.

The finished color is evaluated against a sample because the screen displays it approximately.

Black HL-049M

The black Module creates a graphic accent and suits modern children's or teen furniture.

On a dark facade, it may blend in; on a light one, it highlights every marking error.

Before the series, one handle is tested on a real facade.

HL-049 or HL-049M for multicolored furniture

For several individual colors, unpainted HL-049 made of beech is more convenient.

HL-049M is rational when one of the confirmed ready-made options is suitable.

Mixing ready-made and self-painted parts requires checking gloss and shade.

How to choose oak or beech for the entire series

If the handles will be opaque and multicolored, beech provides a clear path.

If a natural texture is needed, oak is chosen.

Beneficial choose oak, beech, and surface preparation before forming the order.

Why finishing is ordered together with the quantity

The color scheme affects the reserve and marking.

For twelve identical handles, one specification is enough, but for six colors, the parts need to be distributed by shade.

First, the quantity of each item is approved, then materials are purchased.

Which Module dimensions are confirmed

For HL-049, the size A × B × C × D is confirmed as 42 × 42 × 27 × 20 mm.

These four values need to be read together with the drawing, because the letter designations indicate different sides and mounting parameters.

You cannot turn one of the numbers into a center distance without viewing the DWG.

What does the 27 mm protrusion and the 20 mm parameter mean

The card shows the C and D values, but their exact geometric role is determined by the product diagram.

It is important for the buyer to understand how much the handle protrudes above the facade and where the mounting part is located.

In the article, these parameters are not interpreted as screw length or center distance without confirmation by the drawing.

How to check the grip comfort

A paper template shows the size but does not convey the volume.

Before a large series, it is useful to apply the actual Module to the facade and try to open a door or drawer.

The handle should be accessible to the fingers and not press against the adjacent edge.

How to check the scale 42 × 42 mm

On a small pencil drawer, a 42 mm square can become the main accent.

On a wide door, it looks more compact and may require a more thoughtful position.

A full-size paper square helps compare options before purchase.

How to measure old holes

Remove the existing handle from the facade and measure the position of the hole or holes from the edges.

Transfer the data to the Module drawing and check whether the new part will cover the traces of the old fittings.

Compatibility cannot be determined solely by the external size of 42 mm.

What to do with old holes

If the new mounting point coincides with the old one, check the diameter and fasteners.

If it does not match, the old hole is closed using a technologically agreed method before final finishing.

On an already finished facade, an extra drilling may remain visible, so replacement requires a template.

Why the center distance may not apply

The term is especially important for pull handles with two mounting points.

HL-049 is called a knob handle in the card, but the actual mounting scheme is still verified against the drawing and the kit.

It is not allowed to automatically transfer the center distance of the old bracket to the Module.

How to check the number of mounting points

Inspect the drawing, the back side of the product, and the mounting kit.

Before drilling, it should be clear how many holes are required and what their diameter is.

If the documentation and kit raise questions, clarify them with the manager before installation.

How to measure the thickness of the facade

The thickness is measured at the installation point, not according to the nominal description of the furniture.

A panel, frame, or additional overlay may give a different value.

The screw length must ensure fastening without protruding into the front part of the handle and without insufficient engagement.

How to choose the screw length

The exact length depends on the facade, the mounting part of the handle, washers, and other connection elements.

The mounting kit is included, but the buyer must ensure it matches the actual thickness of the furniture.

Do not shorten or replace the screw without understanding the thread and depth.

How not to overtighten a wooden handle

Excessive force can damage the wood, threaded part, or coating.

The fastener is tightened to a stable position without twisting or pressing through the facade.

The exact tightening torque is not universally specified.

Why the handle may crack

The cause can be an unsuitable screw, misalignment, excessive tightening, or drilling off-axis.

Wood requires careful joining without impact load.

Before serial installation, one assembly is assembled as a control.

Installation on MDF

The MDF facade must have sufficient thickness and a continuous coating around the hole.

The drill is selected according to the fastener, and the exit on the reverse side is protected from chipping.

Module should not be used to mask a weak or damaged area.

Installation on laminated chipboard

Laminated board is sensitive to chipping around the drilling.

The installation point should not be too close to the edge without technical verification.

After installation, the fastener should not compress the coating and cause cracks.

Installation on a solid wood facade

The direction of the fibers and seasonal wood movement are taken into account when drilling and tightening.

The position of the handle is linked to the panel, frame, and existing trim.

Do not install the part into a thin decorative edge without confirmed support.

Can the Module be installed on glass?

The card does not confirm installation on glass facades.

Glass requires specialized gaskets, holes, and fasteners.

Without a separate technical diagram, such use is excluded.

How to make a drilling template

The template replicates the facade edges and the mounting point(s).

It is tested on one control facade, then transferred to the others.

For left and right doors, the template is marked to avoid accidentally flipping it.

Template for a two-door cabinet

One side of the template sets the distance from the center edge and the height.

For the second door, a mirrored orientation is used.

After marking, the points are compared with a laser or level before drilling.

Template for a series of drawers

It rests on the top or side edge of each facade in the same way.

If the height of the drawers differs, the template may have several marked lines.

You cannot transfer the center of one facade to another without checking its dimensions.

How to mark handles with a laser level

The laser helps maintain a common horizontal or vertical line on a group of facades.

But it does not determine the distance from each edge and does not replace the template.

The best result is achieved by combining a laser line and individual control dimensions.

How to protect enamel when drilling

The surface must be completely dry and gain strength according to the coating technology.

In the drilling area, use careful marking and a tool without runout.

A chip or crack on the facade is not automatically hidden by the handle square.

When to drill the facade — before or after painting

On new furniture, holes are often planned before finishing to correct possible defects.

On finished facades, drilling is performed after full marking and coating protection.

The sequence is determined by production, but the installation diagram must be approved in advance.

How to check the opening of two doors

After temporary installation, the doors are opened simultaneously and alternately.

Handles must not collide, touch the adjacent facade, or interfere with the full opening angle.

This check is especially important when the central gap is small.

How to install handles on

Module for children's wardrobe

The geometry of the constructor supports the game theme without depicting a specific character.

On a two-door wardrobe, two identical handles create calm symmetry, while multi-colored ones create a more active accent.

For design examples, you can choose handles for wardrobe doors and assess the scale on tall facades.

Module for a children's chest of drawers

Repeating square details on several drawers creates a clear rhythm.

A chest of drawers is convenient for a color sequence because the handles are read as one vertical group.

You can select wooden handles for the dresser and nightstand based on ready-made interior solutions.

Module for the desk

Handles connect the work area with the wardrobe and dresser.

On narrow drawers, a 42 mm scale is important; on long ones, the decision about one or two grip points matters.

Orientation and color are fixed in the overall room specification.

Module for the bedside table

One door and one drawer usually require two handles.

They can be placed on a common vertical axis or aligned with the edges of the fronts.

In small furniture, it is especially noticeable if the handle size is disproportionate to the surface.

Module for shelving with drawers

Each pull-out drawer is considered a separate section.

Colorful Modules help visually label storage areas but do not replace clear organization.

For the series of removable drawers, check if the handle protrusion interferes with rearrangement.

Module on kitchen fronts

The shape can be used not only in children's rooms but also in modern play kitchens after checking convenience and finish.

The surface must withstand frequent cleaning and hand contact.

Before such a project, it is necessary to look at the use of wooden handles on fronts and coordinate the coating.

Module in the playroom

Handles can combine cabinets, toy boxes, and low chests.

A uniform design helps assemble different furniture into a set.

The safety of a specific installation depends on the front, fastening, and coating, and is not guaranteed solely by the name of the children's collection.

Module in the teenager's room

The black, transparent oak, or solid matte version looks more restrained than the bright palette.

The geometry of the construction set is preserved but does not make the interior too childish.

The color can be matched with metal legs, a lamp, or a desk.

Module in a kindergarten or play area

For commercial use, load, coating, fastening, and object requirements must be checked.

A large series is ordered with a reserve and one control unit.

The product card does not replace the institution's documentation and testing of finished furniture.

Module in a hotel family room

Handles can support the game theme of children's furniture.

Spare parts, repeatable finishes, and preserved specifications are important for maintenance.

The finished HL-049M reduces finishing work, while HL-049 provides an individual palette.

How to link a wardrobe, dresser, and table in one series

Use one Module form on all main items.

Create differences with color or material, but do not change the shape, height, and orientation at the same time.

A repeating article makes furniture visually complete.

How not to overload a room with colorful handles

Bright facades and bright Module at the same time can create visual noise.

In this case, the handles are made neutral or one accent color is left.

The palette is checked on the overall visualization of the room.

Module, Paw or Star

Module gives a geometric construction set motif, Paw gives a playful paw shape, Star gives a decorative star.

The choice depends not on which handle is brighter, but on the furniture theme and the number of repetitions.

For a large series, the calm Module usually handles multiple repetitions more easily.

When to choose Paw HL-047

The paw is suitable for a room with an animal theme and separate accent facades.

You can buy Paw HL-047 handle in paw shape for a nightstand, cabinet, or single gaming drawer.

Mixing with Module requires a unified palette and a limited number of shapes.

When to choose Star HL-044M

The star looks more decorative and suits a separate central drawer or an accent cabinet.

You can buy the ready-made Star HL-044M handle, if you need a ready finish and a star shape.

On each drawer of a chest, such a shape can compete with Module and overload the facade.

How to mix Module, Paw and Star

Choose one main form for most facades and one accent form for one or two sections.

Keep the same installation height and a related palette.

Do not distribute three forms without a scheme throughout the room.

HL-049 and a regular wooden knob

A regular round knob looks more neutral and pairs more easily with classic furniture.

Module has a square, playful geometry and becomes part of the facade design.

It is chosen when the form should be read, not just perform a function.

HL-049 and a pull handle

A pull handle usually has two mounting points and an elongated grip area.

The module is compact and feels like a button-handle.

When replacing the staple, it is especially important to address the issue of the second old hole.

HL-049 and HL-049M

The models match in geometry but differ in surface readiness and current materials.

HL-049 offers beech or oak and freedom of finishing, HL-049M is a ready-made oak version.

In one room, they can be combined only after checking color and gloss.

Unpainted handle or ready-made

The unpainted version requires time and control but allows matching the project color.

The ready-made one saves steps, but the palette is limited to confirmed options.

In the category you can buy wooden handles for enamel or tinting or buy ready-made wooden furniture handles.

How to choose handles for repairing finished furniture

First, measure the holes and the thickness of the facade, then choose the shape and finish.

Unpainted HL-049 is convenient if the facades are to be repainted.

For furniture without repairs, ready-made HL-049M can reduce the amount of work if the color matches.

How to choose handles for new furniture

The holes are designed immediately for the Module, so there is no problem with old marks.

The quantity and color are included in the furniture specification before the facades are produced.

A control handle is applied to the facade sample before serial drilling.

How to choose handles for a DIY update

The buyer will need a measuring tool, a template, a drill, and the selected finishing system.

If the facades are expensive or already coated with enamel, it is better to entrust drilling to a workshop.

A finished wooden part eliminates the need to create a mold from scratch, but installation still requires precision.

What not to do from scratch

There is no need to cut identical square handles, drill wood, and manually achieve a repeatable shape.

Module already has confirmed geometry of 42 × 42 × 27 × 20 mm and a prepared surface.

The buyer focuses on calculating the quantity, color, and installation.

How to order a series for a furniture workshop

Provide the facade table, quantity of HL-049, material, color, and reserve.

Separately specify the control sample and part numbers for each item.

The workshop must receive the drawing and actual fasteners before drilling.

How to order the layout

For a complex cabinet, a colorful dresser, or several items, a facade project is useful.

You can order handle layout for a furniture set and see the quantity, color, and orientation in advance.

The project reduces the risk of unnecessary drilling and a random palette.

Mistake: counting handles by the number of items

A cabinet, dresser, and table can have different numbers of facades.

Buying 'one handle per item' will inevitably result in a shortage.

First, compile a facade list, then sum up the items.

Mistake: forgetting a reserve

Without a spare Module, damage to one part will force you to search again for the wood type, color, and batch.

Reserve is especially important for manual painting and commercial projects.

The spare handle is stored together with the finish code.

Error: ordering all handles before checking the size

42 × 42 mm can look different on a narrow drawer and a tall door.

First, buy or attach one control piece, then approve the series.

This prevents the scale from being too large or too small.

Error: assuming HL-049 is painted

The basic version comes without coating.

If installed immediately, the wood will remain without agreed protection.

A buyer who needs a ready finish should consider HL-049M.

Error: confusing beech and oak

Beech is intended for enamel, oak for tinting with visible texture.

Changing the material changes the external result and the cost of finishing.

The breed is fixed in each order line.

Error: attributing HL-049M letter

The current card of the finished version shows oak.

It is not allowed to automatically transfer both materials from an unpainted model to HL-049M.

Before ordering, check the current card configuration.

Error: making up the center distance

The dimension line A × B × C × D does not give the right to assign the center distance without a drawing.

For a knob handle, this parameter may be used differently than for a bracket.

Mounting data is taken only from the current DWG.

Error: using old holes without checking

The outer square may cover the mark, but the mounting point does not have to match.

An incorrect hole weakens the facade and damages the enamel.

Before purchasing, measure the old fittings and the back side of the door.

Error: selecting a screw only by the thickness of the facade

You need to consider the handle's seating part, washers, and thread depth.

A screw that is too long can damage the wooden part, a short one may not hold it.

The included fasteners are checked on a test facade.

Error: overtightening the fastener

The wood may crack, and the coating may become dented.

The handle should be held without play, but should not experience excessive compression.

After the first few days of use, the connection is rechecked.

Error: drilling the entire series without a template

A small error will repeat on each facade and become a noticeable common line.

The first point is approved visually, then a template is used.

Before drilling, compare the left and right doors.

Error: drilling by laser without an offset from the edge

The laser shows the level, but not the distance from the edge.

On different facades, the handles will be on the same line, but with different side offsets.

Both a level and a template are needed.

Error: painting handles without marking

After drying, identical parts can be easily confused by colors and orientation.

Each Module is assigned a facade number.

The marking is placed so that it does not damage the finish and mounting surface.

Error: accidentally mixing three shapes

Module, Paw, and Star have different appearances.

Without a unified palette and hierarchy, children's furniture looks like a set of unrelated parts.

One shape should remain primary.

Error: promising absolute safety for a child

Safety depends on the facade, fasteners, installation height, coating, and furniture documentation.

The name of a children's collection does not replace checking the finished product.

Compliance with age standards cannot be claimed without supporting documents.

Error: installing on glass

A standard card does not confirm such compatibility.

Glass requires specialized preparation and gaskets.

For a display case, a technically calculated solution is chosen.

Error: using untested paint

The colored finish must be suitable for furniture wood and room conditions.

No composition can be called safe for children without certificates and manufacturer's instructions.

Materials are selected before painting the entire series.

Error: do not account for opening of adjacent doors

Two square handles may meet in the central gap.

On a corner cabinet, Module may hit the adjacent facade.

A test installation shows a conflict before serial drilling.

Error: not counting wide drawers separately

The basic formula gives one handle per drawer, but a long facade may require two.

The solution depends on the design and convenience, not just the appearance.

In the specification, wide sections are listed on a separate line.

Who is the Module HL-049 for

The model suits a buyer who wants wooden handles with construction geometry and their own finish.

It is especially useful for a set of a children's wardrobe, chest of drawers, bedside table, and desk.

The workshop gets a ready repeatable form, and the designer gets freedom of color.

Who should choose HL-049M

The finished version is suitable for those who do not plan to prime, paint, or tint the handles themselves.

It is convenient for a small order and a suitable ready color.

Before purchasing, the shade and gloss are compared with the facade.

Who Module may not suit

For classic furniture with thin metal fittings, the square playful shape may be too active.

When replacing a two-point bracket, repairing old holes is sometimes more difficult than the installation itself.

In that case, it's worth looking at other wooden handles.

When to choose Paw

The paw better supports the animal theme, animal images, and gaming cabinets.

It is more noticeable than Module and is therefore more often used as an accent.

For a large cabinet, repeating the geometric Module is usually calmer.

When to choose Star

The star suits one central drawer, a bedside table, or an accent door.

The ready-made version is convenient if the buyer likes its finish.

On the entire series, stars create a more decorative rather than constructive rhythm.

How to buy HL-049 on STAVROS

Open the product card, select beech or oak, and determine the total quantity from the facade list.

Check the size 42 × 42 × 27 × 20 mm, fasteners, and production time.

Confirm the color, reserve, and installation diagram before payment.

What to check before payment

The order must include the article number, material, quantity, type of finish, and number of spare handles.

For HL-049M, the finished color is checked separately.

Current payment and delivery terms checked immediately before placing the order.

Where to view the general catalog

If the Module does not fit in shape or size, do not adjust the facade to fit one model.

You can view the catalog of solid wood handles and compare other geometries.

Choosing a different handle is safer than unnecessary drilling and accidental rework.

Where to select materials

For HL-049, you need primer, paint, tinting, or a protective finish according to the chosen system.

You can buy primer, paint, and finishing materials after the species is approved.

Instructions for a specific composition take priority over general advice.

Where to study installation recommendations

Installation requires precise marking, drilling, and checking of fasteners.

Useful recommendations for drilling and installing handles, and for the designer — selection and installation of furniture handles in the project.

The Module drawing remains the primary source of mounting geometry.

What to buy together with Module HL-049

The handle set becomes a complete solution only after selecting the finish, fasteners, and precise layout. For a new facade, materials and a template are needed; for repairs, checking old holes; for a complex children's room, a color and orientation project.

How to check the finished layout before drilling

Print the facades to scale or stick paper squares 42 × 42 mm on the actual furniture.

Check the height, margins, colors, and direction of each Module.

Only after visual approval, transfer the points to a rigid template.

How to perform a test installation

One handle is installed on a test facade or an inconspicuous section.

Check the grip, tightening, protrusion, opening, and coating condition.

The result becomes the standard for the remaining doors and drawers.

How to store spare handles

Spare parts are kept in a dry place, protected from impacts, and marked with a color code.

Together, they keep the screw, coating data, and project number.

This way, the spare will actually be useful, rather than turning into an unidentified wooden part.

How to accept a kit upon receipt

Check the quantity, article number, beech or oak, size, sanding, and fasteners.

Compare unpainted parts by surface condition, finished ones by color and coating.

All questions are recorded before painting and installation.

Final check before ordering

The quantity must match the facade list and reserve.

The material, finish, mounting diagram, and thickness of each facade type must be known.

If there are doubts about holes or screws, they are clarified before drilling the furniture.

How to check the uniform protrusion of all handles

After installation, look at the facades from the side. All modules should protrude evenly, without skew or loose fit.

A difference may indicate an incorrect screw, paint buildup in the hole, or uneven facade. The cause is eliminated before handing over the furniture to the customer.

How to save the specification for future repairs

In the project archive, leave the article number, material, quantity, color, fasteners, facade diagram, and photos of the finished furniture.

When replacing one part, this data allows you to compare the current card with the original order and not select a handle only by external similarity.

How to check the set after full installation

Open each door and each drawer several times. The handles should not turn, collide with each other, or touch adjacent fronts.

Then compare the height and orientation of the entire series in daylight and evening light. Corrections are made before the final handover of the furniture.

How to prepare a spare for storage

It is better to finish the spare Module together with the main batch, but not install it. It is marked with the room name, color code, and project date.

This way, the spare part will be ready for quick replacement and will not require a repeated search for the shade after several years.

FAQ: questions about the Module HL-049 handle

What wood is the Module HL-049 made of?

Made of solid beech or oak.

Is the handle suitable for children's furniture?

Yes, its shape and description are oriented towards cabinets, dressers, nightstands, and other furniture, but the safety of the finished product depends on installation and coating.

What are the dimensions of HL-049?

The confirmed size A × B × C × D is 42 × 42 × 27 × 20 mm.

What is its center distance?

It cannot be assigned by a general dimension line; the mounting geometry must be checked in the current drawing.

One or two mounting points?

The card calls Module a knob-button and confirms the mounting kit, but the exact layout is verified against the DWG and kit.

Are screws included in the kit?

The card indicates that the mounting kit is included in the price. The actual length is checked against the facade thickness.

How does HL-049 differ from HL-049M?

HL-049 is supplied unfinished in beech or oak, HL-049M is a finished oak version with coating.

What colors are available for HL-049M?

The current card confirms white, brown, transparent, and black options.

What to choose — beech or oak?

Beech is suitable for opaque enamel, oak for tinting with visible texture.

Can the handles be painted in different colors?

Yes, unpainted HL-049 fits the project palette. Colors need to be pre-assigned to the facades.

How many handles are needed for a two-door cabinet?

Usually two — one per door, unless the project specifies a different arrangement.

How many handles to order for a chest of drawers with four drawers?

Four as a baseline. A wide drawer may require two after separate verification.

Are spare handles needed?

For a small set, one is useful; for a large or multi-colored series, more are needed according to the project.

Can two Modules be installed on a wide drawer?

This option can be considered after checking the guides, facade rigidity, and ease of opening.

Will the handles fit the old holes?

Not automatically. You need to measure the old mounting scheme and compare it with the HL-049 drawing.

How to measure the thickness of the facade?

At the installation point, taking into account the frame, panel, overlays, and internal parts.

How to choose the screw length?

Based on the facade thickness, handle mounting part, and the included scheme. Random replacement is not recommended.

Can Module be installed on glass?

Such use is not confirmed by the card.

Can I combine Module with Paw and Star?

Yes, as a separate design project: one form should be the main one, the other should be an accent.

How to repeat the same layout?

Approve a control point, make a rigid template, and use it on one side.

Can handles be placed horizontally and vertically?

Rotation affects the pattern, so the orientation is checked on the layout and fixed in the specification.

What is the production time for custom orders?

The HL-049 and HL-049M cards indicate an average time of 5–10 days.

Where to buy HL-049?

In the unpainted Module card on the STAVROS website.

Where to order a finished HL-049M?

In a separate card for the handle with coating.

What should I check before payment?

Quantity, reserve, material, size, finish, fasteners, facade thickness, and installation diagram.

Result: how many Module HL-049 to order

Module HL-049 is a wooden knob handle measuring 42 × 42 × 27 × 20 mm made of beech or oak. The unpainted version is suitable for custom enamel and tinting, while the finished HL-049M eliminates the need for self-finishing.

The quantity is calculated for each facade. A double-door cabinet requires two handles, a chest of drawers with four drawers — four, a nightstand with a door and a drawer — two, a desk with three drawers — three. In the considered set, it comes to 11 pieces, and with a reserve — 12 or 13.

Before installation, check the drawing, facade thickness, fasteners, old holes, scale, and orientation. For a wide section, decide separately whether one Module or two are needed. The color scheme is recorded in the specification before painting.

On the STAVROS website, you can open the HL-049 and HL-049M cards, compare Paw and Star, select fasteners and materials. The ready-made repeatable form eliminates the need to make handles from scratch, and accurate calculation turns individual parts into a coordinated set for a cabinet, chest of drawers, nightstand, and desk.