The vase fits by the numbers, but not on the shelf: how to check the working area of the carved shelf PKR-002

The vase has already been purchased. It has a round base with a diameter of 180 mm, a tall body, and noticeable weight even without water. The buyer opens the PKR-002 card, sees the size 415 × 355 × 225 mm, and quickly concludes that a depth of 225 mm should be enough, with some room to spare. After receiving the shelf, it turns out that the three numbers describe the overall dimensions of the entire carved structure, not the rectangle on which the item should stand. The rear decorative part takes up space, the front edge has its own shape, and the actual horizontal platform is smaller than the outer contour.

This is the main mistake when choosing. Buy the carved shelf PKR-002 after checking the drawing is reasonable not when the overall size seems suitable, but when the width and depth of the working surface, the position of the rear decor, the shape of the front edge, the mounting scheme, and the permissible load for a specific wall are confirmed. Until this data is available, comparing the vase base with the number 225 mm remains an assumption.

PKR-002 — wooden carved wall shelf with overall dimensions of 415 × 355 × 225 mm. The product card features beech and oak, with "Prestige" sanding quality, beech prepared for enamel, and the option to choose oak for tinting. The shelf is made to order and is intended for small accessories, souvenirs, and decorative items. But the word "small" does not provide a precise answer: whether a specific vase, clock, icon, or figurine will fit.

Here, the choice starts with the item, not with an abstract interior. First, the base is measured, then the overall and usable dimensions are analyzed, a top view is requested, a paper template is made, the composition on the wall is checked, and only then are the material, finish, and ordering method selected. This approach helps choose a carved wooden shelf without guessing and without transferring characteristics of similar products to PKR-002.

Carved shelf PKR-002

from 815.50 $

Go to Catalog

The short answer: the size of 415 × 355 × 225 mm is not sufficient

Three numbers confirm the external dimensions of the product. They do not answer five practical questions:

1. what is the width of the horizontal platform;

2. what is its actual depth;

3. where does the rear carved part begin;

4. how much does the shaped edge reduce the supporting surface;

5. what weight will the shelf support after installation on a specific wall.

Therefore, a vase base with a diameter of 180 mm cannot be automatically compared with 225 mm. For a confident decision, a drawing or a top view with separate parameters of the working platform is needed.

The correct sequence looks like this:

• measure the item along the lower support part;

• obtain the current drawing PKR-002;

• clarify the useful width and depth;

• cut out the platform template;

• place the item on the mockup;

• check the free space and center of gravity;

• coordinate the load and installation;

• choose beech or oak;

• place the order.

Watch video ...

What the PKR-002 card reports precisely

Before placing an order, you need to view PKR-002 dimensions in the current product card. Price, delivery time, and available options may change, so they are checked right before purchase.

Our factory also produces:

Pilaster Base BS-002

from 67.22 $

Pilaster Base BS-003

from 75.02 $

Pilaster Base BS-004

from 45.75 $

Base for pilaster BS-005

from 29.03 $

Base for pilaster BS-006

from 18.66 $

Pilaster Base BS-007

from 78.68 $

Pilaster Base BS-008

from 72.58 $

Base for pilaster BS-009.1

from 10.25 $

View Full Product Catalog

What data is missing to answer "will the item fit"

Not confirmed in the text specifications:

• useful width of the horizontal surface;

• useful depth;

• shape of the surface in plan view;

• radius or contoured outline of the front edge;

• distance from the wall to the rear boundary of the item;

• height of the rear decorative element;

• maximum permissible load;

• mounting diagram;

• number of mounting points;

• kit contents;

• availability of wall mounting bracket;

• permissibility of installation on different wall types.

The absence of these figures in the card text does not mean that the product has no working area or mounting solution. It means only one thing: the buyer must not draw them in independently. An up-to-date drawing and confirmation for a specific project are required.

Overall dimension and working area are different contours

Imagine a shelf from the side. From the wall to the most protruding point of the carved decor may be 225 mm. But the horizontal surface on which the vase stands may end earlier. Part of the depth is taken up by the back panel, carved bracket, edge, or figured finish. Without a top view, this cannot be determined.

Let's separate the concepts.

Only the overall dimensions of PKR-002 are confirmed. The values W₂, D₂, R, H₁, and F must be obtained from the technical drawing.

Why the number 225 mm is especially easy to misunderstand

The depth of an item is usually perceived as the distance from the wall to the front edge. The buyer sees 225 mm and mentally pictures a rectangular shelf with a depth of 225 mm. For a carved model, the outer contour is more complex: there is a decorative structure at the bottom, a relief part at the back, and the front edge does not necessarily form a straight line.

Even if 225 mm does denote the overall protrusion, the usable area may be different. Therefore, the statement “a vase with a diameter of 180 mm will definitely fit” without a drawing would be unreliable.

There is another risk: the site presents a separate model Versailles 009-002 with the same overall size. The coincidence of three numbers does not prove the coincidence of shape, working surface, or mounting. You cannot transfer the description of one product to another.

The vase is already chosen: what to measure before buying a shelf

The main mistake is measuring the widest body of the vase or, conversely, the narrowest part of the foot. For compatibility with the shelf, the supporting geometry is needed.

Maximum base diameter

If the base is round, measure it at its widest point. With handmade ceramics, the contour may be slightly uneven, so one measurement is not enough. Turn the vase and check the diameter in several directions.

Protruding feet or decorative belt

Some vases rest not on a solid ring, but on three or four points. Others have a lower belt that protrudes more than the central part. The template takes into account extreme points, not just the visible circumference.

Height of the center of gravity

A tall narrow vase may geometrically fit on a small platform, but remain sensitive to touch. This is especially important if it is placed in a passage, near a door, or at shoulder height.

Weight of the empty and filled vase

Water and flowers increase the load. The weight now affects not only the working surface but also the attachment of the shelf to the wall. Without confirmed load, a decision cannot be made based only on the base size.

Possibility of safe grip

The item needs to be placed and removed. If there is no space left around the base for fingers, every move becomes inconvenient. Formally, the vase fits, but using the composition is difficult.

Example: vase base 180 mm

The buyer sees the total protrusion of 225 mm and calculates the difference:

225 − 180 = 45 mm

This supposedly gives 22.5 mm of clearance at the front and back. This calculation is only valid for a rectangular platform with a useful depth of exactly 225 mm. For PKR-002, this value is not confirmed.

The correct calculation is performed after obtaining D₂:

Free depth clearance = D₂ − base depth

If D₂ is 200 mm, the clearance will be 20 mm. If D₂ is less than 180 mm, the base extends beyond the working contour. If the front edge is shaped, simple subtraction is still not enough — a shape template is needed.

The base fits, but the item looks too large

Compatibility has two levels.

The first is technical: the base fully stands on a flat surface, the item does not rest against the decor, and the load is acceptable.

The second is compositional: a visible frame remains around the item, the shelf does not look like a random stand, the carving is readable, and the vase does not cover the entire silhouette.

A large item on a small shelf can be stable but visually heavy. From a distance, it will seem as if the vase is placed on the edge. Therefore, after the geometric check, a full-scale mockup is needed.

Paper template of the item's base

Place the vase on a sheet of paper and trace the bottom contour. If the base is shaped, mark all support points. For an item with handles or side protrusions, make a second, larger contour at the corresponding height.

On the template, note:

• maximum width;

• maximum depth;

• center position;

• direction of the front side;

• points of actual support;

• the weight of the object;

• The height.

Such a sheet can be compared to a shelf drawing without constantly moving the fragile item.

The figurine requires a different method of checking

A figurine rarely has a simple round base. The pedestal may widen toward the bottom, protrude forward, have several support points, or continue into a decorative part that visually seems to be part of the figure. If you measure only the width of the body, you might miss the deepest or widest point.

Extreme points of the pedestal

Place the figurine on a sheet and trace the bottom contour. Then separately mark wings, clothing, weapons, a tail, a protruding pedestal, or other elements that are above the platform but may hit the wall or adjacent decor.

Position of the main mass

A tall figure may rest on a small pedestal, with the main mass shifted forward. In this case, the center of gravity is closer to the front edge of the shelf. Geometrically, the base fits, but the structure becomes sensitive to accidental contact.

Number of support points

Some figurines stand on four small legs or on an uneven cast base. The work surface must support all points. One leg must not be allowed to hang over a shaped cutout.

Checking from a distance

After the geometric fitting, step back two or three meters. If the statuette completely covers the top surface and a significant part of the carving, the shelf may be perceived as too small. In this case, not only a wider plane is needed, but also a different scale for the entire piece.

Table clocks: frontal width says almost nothing about depth

Clocks are often photographed from the front, so the buyer sees the width of the dial and the height of the case. At the back there may be a leg, mechanism, door, cord, or an angled stand. All these details increase the depth.

To check a clock, measure:

• the width of the bottom support;

• the full depth including the back leg;

• the position of the cord;

• the height and tilt angle;

• the distance to the wall for access to the mechanism;

• body mass;

• position of the center of gravity.

If the back leg rests against the carved edge, the clock will tilt more than intended. If the wire is pinched, the item cannot be placed flush. Therefore, the front view size does not replace the side drawing.

Candlestick: geometry complemented by safety considerations

The candlestick is checked by base, height, and stability. But if it holds a real candle, dimensional compatibility alone is not enough. It is necessary to assess the distance to the wall, wood finish, flame height, air movement, and the possibility of wax falling.

The initial data for PKR-002 do not confirm the permissibility of an open flame. Therefore, the article does not recommend placing a burning candle without a separate design solution. A decorative candlestick without fire or an electric imitation requires its own verification but does not create the same heating risk.

Decorative bowl: wide top part may hide the shelf

The bowl may have a compact base but a wide top edge. Technically, it can stand stably, but visually it may overlap the carving or extend far beyond the outline.

Make two templates:

1. lower support base;

2. maximum outer contour.

The first shows whether the item fits. The second helps to see whether the bowl competes with the shelf, mirror, or neighboring items.

Icon or small icon case: check the support and tilt

An icon may stand vertically, have a separate stand, or be part of an icon case. In this scenario, not only the bottom rail is measured, but also the depth of the entire structure, the tilt angle, the frame protrusion, and the mass.

It is especially important to check the stability of a tall item. If the bottom support is short and the center of gravity is high, accidental contact may cause it to fall. The possibility of additional fixation is agreed upon separately and is not derived from the overall shelf size.

What to request before placing an order

The buyer needs not another decorative angle, but technical information. The request should include:

• top view;

• outer contour;

• flat working surface;

• width W₂;

• depth D₂;

• shape of the front edge;

• position of the rear decor;

• height of the limiting elements;

• mounting points;

• installation diagram;

• permissible load;

• kit contents;

• explanation of A, B, and C.

The wording of the request can be simple: the item has a base of a certain size, height, and mass; it is required to confirm the working area, mounting, and load. The more accurate the initial data, the lower the risk of receiving a formal answer about the overall dimensions.

The top view is more important than a beautiful photo

The frontal angle shows the carving, proportions, and overall character. But it almost always hides the depth of the platform. Perspective can visually enlarge the horizontal part, while the rear decorative element remains unnoticed.

The top view should clearly show:

• the flat area;

• the edge of the carving;

• the rear junction;

• the front figured edge;

• width;

• depth;

• the central axis;

• the mounting points.

If there is no technical drawing, exact compatibility cannot be determined from a photo.

A scaled drawing and an on-screen image are not the same thing

The on-screen image changes with the browser zoom and monitor size. A scaled drawing contains control dimensions. When printing, disable automatic fit-to-page and check a known segment with a ruler.

Working order:

1. get the file;

2. find the control dimension;

3. print at 100% scale;

4. measure the control segment;

5. glue the sheets together;

6. cut out the useful contour;

7. place the template on the object.

If the control dimension does not match, the layout cannot be used.

Curved edge: why a rectangular formula is not enough

Suppose the usable area is 220 mm wide and 190 mm deep. A base with a diameter of 180 mm formally fits. But if the front corners are cut off or the edge is curved, the circle may intersect the surface boundary.

For a complex contour, they check not two numbers, but the overlay of shapes. A paper mockup shows this faster than any description.

This check is especially important for:

• a round vase;

• a wide bowl;

• an object on three legs;

• a figurine with an elongated pedestal;

• a clock with a rear support;

• an asymmetrical souvenir.

How to make a workbench template

After confirming the dimensions, transfer the outer and inner contours onto cardboard. Separately mark the wall, the back carved part, the front edge, and the central axis. Place the item's template on top and check for intersections.

The template should answer four questions:

• Do all supports stand on a flat surface?

• Is there space left around the base?

• Can the item be picked up by hand?

• Does the center of the item match the center of the shelf?

For a tall vase, it is useful to place the item itself on the mockup, but only on a stable table. Cardboard on the edge of furniture is not suitable for such a fitting.

Free space around the base

There is no universal mandatory offset. It depends on the item's height, shape, installation location, and risk of contact. But zero clearance requires special caution.

An empty field helps:

• place the item without hitting the edge;

• pick it up with your fingers;

• preserve the visible silhouette of the shelf;

• reduce the risk of accidental displacement;

• wipe the surface;

• visually separate the item from the carving.

If the base occupies the entire plane, the shelf ceases to read as an independent decorative element.

The center of gravity matters more than the symmetry of the base

An item may have a symmetrical foot and a heavy upper part shifted forward. For example, a figurine with an elongated figure or a clock with a massive dial. Formally, the base is in the center, but the load acts closer to the edge.

Check:

• where is the main mass located;

• is the object tilted;

• does the top part extend into the passage;

• does the object create a noticeable lever;

• is it stable when lightly touched.

Without confirmed load, a categorical conclusion cannot be made based on geometry alone.

Transfer PKR-002 to the wall with painter's tape

When the working outline is clear, mark the overall dimensions of the shelf on the wall. Use tape to mark the width, height, platform level, and edge protrusion. Use a separate cardboard profile to show 225 mm in side projection.

Add the outline of the object, mirror, painting, adjacent furniture, and door leaf. Such marking shows what is not visible in the card: the real volume of the composition in the room.

Overall protrusion and passage safety

Even if the vase fits perfectly, the shelf can obstruct movement. In the hallway, the total protrusion of 225 mm plus the volume of the object creates a noticeable zone. At shoulder level, accidental contact is especially likely.

Check:

• passage width;

• door trajectory;

• movement of outerwear;

• edge of the cabinet;

• mounting height;

• access to the switch;

• proximity to the stairs;

• possibility of cleaning.

The work surface is responsible for the object, the overall dimension for the room. Both conditions must be met simultaneously.

PKR-002 in the living room: one object instead of a random collection

The carved silhouette is better revealed when a single expressive object stands on the shelf. A vase, clock, or figurine gets its own wall pedestal. Several small items can hide the platform and overload the decor.

Before ordering, consider:

• center of the wall;

• eye level;

• adjacent mirror;

• lighting direction;

• background color;

• size of the item;

• symmetry;

• distance to furniture.

For overall layout, the material about where to place a carved shelf in the living room or hallway. The current task is: confirm whether the specific item is suitable for PKR-002.

Entryway: the shelf should not catch shoulders and bags

In a narrow space, the overall protrusion matters more than frontal beauty. A vase or clock increases the physical volume. If the passage is tight, a person will brush against the item with their clothing.

Check the installation height, door movement, cabinet depth, mirror, and bag trajectory. If the overall outline is too large, it's better to look at all carved wall shelves and compare more compact options.

Shelf next to the mirror

PKR-002 can work as a single accent or part of a paired composition. Here, the axes are especially important.

Compare:

• the center of the shelf;

• the edge of the frame;

• height of the object;

• reflection;

• distance between elements;

• the projection from the wall;

• direction of light.

A tall vase can block the mirror in the reflection, although the composition appears open in the frontal sketch.

Paired placement

Two identical shelves on either side of a mirror or portal require the same height and clear symmetry. If different objects stand on them, both bases are checked separately.

The order specifies two PKR-002, one material, one surface preparation, the same color, and one batch. Pairing does not cancel the technical check of the work area and the load on each wall.

Beech under enamel: when the shelf should match the color of the wall or furniture

Beech is chosen for opaque painting. In such a finish, the natural wood grain is not the focus, but rather the silhouette of the carving, shadows in the recesses, and precision in matching surrounding elements.

This option is appropriate when the shelf must match painted furniture, moldings, door frames, or wall panels. White, gray, blue, or other enamel can make PKR-002 part of the overall architectural composition. But the color is not approved from a screen. A test sample with the same primer, enamel, and gloss level is needed.

The buyer must decide in advance:

• whether the shelf will match the wall;

• whether it should differ by one or two tones;

• whether patina on the relief is needed;

• how the horizontal surface is painted;

• whether the back side is finished;

• at what point installation is performed.

If the vase already has an active pattern, a solid-color shelf can serve as a calm base. If the item is white and the shelf is also white, the silhouette may get lost against a light wall. Such questions are resolved on a color mockup, not after installation.

Oak for tinting: the texture becomes part of the composition

Oak is chosen when the wood grain should remain visible. Tinting highlights the carving differently than enamel: light works with both the form and the fibers.

Before ordering, they compare:

• the tone of adjacent furniture;

• the color of the floor;

• the finish of the doors;

• lighting;

• the shade of the item;

• test coating;

• gloss level;

• the direction of the grain on the surface.

A dark vase on dark oak may lose its outline. Light ceramics, on the contrary, will become more noticeable. An oak shelf next to furniture of a different wood tone may look like a deliberate accent or an accidental mismatch — it depends on the project.

How to choose a carved wall shelf for an interior it is useful to study before making a final decision between beech and oak. But the material does not determine the item's compatibility with the work surface: the geometry is still checked separately.

"Prestige" — confirmed preparation PKR-002

For PKR-002, the grinding quality is specified as "Prestige". This helps plan the finishing, but does not mean that after delivery you can automatically apply the finish without inspection.

Check:

• platform edges;

• thread recesses;

• front edge;

• back side;

• intended mounting points;

• surface uniformity;

• absence of damage after transportation.

If the shelf is ordered as a pair, both pieces are compared under the same light. Minor differences in natural wood are possible, so the finishing is done with one system and in one workshop.

Finishing cannot be approved before fitting the item

Imagine that the shelf has already been painted in a complex color, and then it turned out: the vase does not fit or covers all the decor. Changing the model after finishing is harder, and the spent finish does not solve the geometric error.

Reliable order:

1. get a drawing;

2. confirm W₂ and D₂;

3. make a template;

4. check the item;

5. transfer the dimension to the wall;

6. agree on load and mounting;

7. choose beech or oak;

8. approve a finish sample;

9. place the final order;

10. hand over the technical scheme to the installer.

Why the article doesn't specify the allowable load

The load depends not only on the shelf material. The system involves the structure itself, mounting points, wall material, anchors or dowels, installation depth, item position, and installation quality.

A single number without describing the mounting assembly would be a dangerous oversimplification. For example, the same shelf on a concrete wall and on a hollow partition requires different solutions. A vase with water acts differently than a light figurine. An item placed close to the wall creates a different lever arm than one positioned at the front edge.

Therefore, the allowable weight for PKR-002 is requested together with the mounting diagram. If the exact value is not confirmed, a heavy item cannot be considered allowable by default.

Load lever arm: why item position changes the force

Two items of the same mass can load the mounting differently. One stands near the wall, another at the front edge. The farther the center of mass is from the mounting plane, the higher the moment.

Practical takeaway: a vase is not moved forward just for a nice silhouette until the working area and load are checked. If rear decor prevents placing the item closer to the wall, this must be considered before purchase.

Drywall, brick, and concrete — three different tasks

The card in the original diagram does not confirm a universal wall mounting kit. Therefore, it cannot be stated that the same hardware fits any wall.

For each base, the following is determined:

• material;

• thickness;

• presence of void;

• position of racks;

• finish layer;

• acceptable anchor;

• number of points;

• shelf weight;

• the weight of the object;

• distance of load center from the wall.

Drilling begins after receiving the mounting diagram, not after fitting the decorative contour.

Is fastening included in the order

No confirmed information. Before payment, you need to find out:

• whether wall fastening is included;

• is there a mounting template;

• is an instruction manual included;

• how many points are provided;

• is additional hardware required;

• what does the buyer receive with one PKR-002.

You cannot buy random dowels "just in case." First, the wall, layout, and load must be confirmed.

PKR-002 and PKR-001: more compact does not automatically mean more convenient

View the more compact carved shelf PKR-001 useful if the overall size of PKR-002 is too large for the wall. But PKR-001 cannot automatically be declared suitable for a specific vase.

Article about where to place PKR-001 and what to put on it, helps to understand another scenario. For PKR-002, the question of useful surface remains central.

PKR-012.2 and PKR-028.1: why read a comparison of other models

Material where you can compare PKR-012.2 and PKR-028.1 by item size, useful as an example of choosing between a long and compact shelf. However, the known parameters of these models cannot be transferred to PKR-002.

The comparison helps to formulate your own task:

• do you need one item or several;

• is length or depth more important;

• what scale matches the wall;

• is a compact point needed;

• does the item overlap the decor;

• How much free space should remain.

After that, PKR-002 is still checked against its drawing.

PKR-002 and Versailles 009-002 are independent products

The matching overall size of 415 × 355 × 225 mm creates a risk of confusion. A buyer may read the description of another item and decide that 225 mm definitely means the useful depth of PKR-002.

This cannot be done. Different products may have a different front edge, rear decor, work surface, mounting, construction, and configuration. In the request, always specify the article number PKR-002 and ask for the technical drawing of that exact model.

How to understand that PKR-002 is suitable

The decision can be considered justified when the following conditions are met simultaneously:

• the item fits entirely on the work surface;

• the base does not cross the shaped edge;

• the item does not press against the rear decor;

• there is room for capture;

• the composition looks balanced;

• the overall size fits the wall;

• the protrusion does not obstruct the passage;

• the material matches the finish;

• the load is confirmed;

• the installation is coordinated with the base;

• the configuration is clear.

One positive point does not compensate for the rest.

When to continue searching for another model

PKR-002 should not be ordered for a specific item if the working area is not confirmed, the base is wider or deeper, the item stands on the edge, the rear support of the clock does not fit, the overall protrusion obstructs passage, or the mass is not agreed upon.

It is reasonable to continue searching also when the thread is almost completely hidden behind the item. In such a case, the buyer pays for an expressive decorative silhouette, but it is barely visible in the interior.

You can Buy wooden shelves for the wall after comparing several cards and drawings. Choosing a different model does not mean giving up carved decor — it is a search for a more suitable geometry.

What to include in the order together with PKR-002

Finishing materials and fasteners cannot be assigned without confirmation. But the composition of the project is formed in advance.

Random fasteners are not bought "along the way". First, technical data is obtained.

Single or paired shelf

One PKR-002 works as a wall pedestal for a single item. The paired scheme is suitable for a mirror, portal, fireplace, or symmetrical furniture composition.

When ordering a pair, you need to check:

• same material;

• same preparation quality;

• shade matching;

• same mounting height;

• equal distances to the center;

• the mass of both objects;

• the same wall base;

• mirror or identical orientation.

If one vase is taller than the other, the asymmetry should be intentional, not occur after installation.

How to choose the quantity

The basic formula is simple:

Number of installation spots × number of shelves in one composition + agreed reserve

For one item on one wall, one shelf is needed. For a mirror with two symmetrical accents, two are needed. For a series of room numbers in a hotel or display cases in a store, the quantity is calculated according to the project.

A reserve shelf is not ordered automatically. It may be useful in a large series, but the cost and meaning of such a stock should be evaluated separately.

Ordering for a single item and ordering for a collection are different tasks

PKR-002 is better revealed as a support for a single accent. If you need to place three or four items, the usable area and overall silhouette may feel cramped.

For the collection, check:

• the total width of the bases;

• the gaps;

• the height of the items;

• access

  Who PKR-002 suits

  The shelf suits a customer who:

  • wants to place one expressive item;

  • is ready to request the current drawing;

  • checks the useful surface;

  • chooses classic carved decor;

  • uses beech under enamel or oak under tinting;

  • coordinates the mounting;

  • takes into account the width of the passage;

  • orders after the mockup;

  • does not wait for universal load without calculation;

  • prepares the finish according to the sample.

  PKR-002 is especially appropriate when the shelf should be perceived not as a storage place, but as a small wall pedestal. Then the carving, the object, and the free wall form one composition.

  Who should choose a different model

  Continue searching when:

  • a long row of items is needed;

  • the wall is too narrow;

  • the passage is tight;

  • the base of the item is large;

  • confirmed heavy load is required;

  • the interior requires minimalist geometry;

  • there is no way to obtain a drawing;

  • the wall base is not suitable;

  • the product must be fully finished without further finishing;

  • dimension 415 × 355 × 225 mm is excessive;

  • the item completely hides the decor;

  • a shelf is required for regular storage.

  Rejecting PKR-002 in an unsuitable scenario is not a loss of purchase, but protection of the project from error.

  Checklist before ordering

  Item	Your data
  Article number	PKR-002
  Item	___
  Base	___ × ___ mm
  Maximum outer contour	___ × ___ mm
  Height	___ mm
  Weight of empty item	___ kg
  Weight in use	___ kg
  Usable width W₂	Confirm
  Usable depth D₂	Confirm
  Front edge shape	Confirm
  Rear decor	Confirm
  Overall dimensions	415 × 355 × 225 mm
  Material	Beech / Oak
  Preparation	«Prestige»
  Finishing	Enamel / tinting
  Wall type	___
  Mounting diagram	Received / not
  Permissible load	Confirm
  Fasteners included	Confirm
  Quantity	___
  Paired placement	Yes / no
  Paper template	Done / not

  A completed checklist turns a conversation with a manager from a general "will the shelf fit?" into a specific technical task.

  Request template for manager

  A carved shelf PKR-002 with overall dimensions 415 × 355 × 225 mm is required for an item with a base of ___ × ___ mm, height of ___ mm, and weight of ___ kg. Please provide an up-to-date drawing with a top view, indicate the usable width and depth of the horizontal platform, the shape of the front edge, the position of the rear decorative part, mounting points, permissible load, and configuration. We are considering beech under enamel / oak under tinting, with "Prestige" sanding quality. Wall material — ___. Quantity — ___.

  It is useful to attach a photo of the item next to a ruler and a diagram of the wall to the request. Then the specialist will see not only the numbers, but also the actual shape.

  How to order PKR-002 on STAVROS

  1. Open the product card and check the current price of PKR-002.

  2. Do not compare the base with the overall dimension.

  3. Request a top view.

  4. Get W₂ and D₂.

  5. Make a template.

  6. Check the item.

  7. Transfer the outline to the wall.

  8. Agree on the load.

  9. Clarify the fasteners.

  10. Select the material.

  11. Confirm the finish.

  12. Order one or two shelves.

  13. Hand the drawing to the installer.

  14. Install only after checking the base.

  If the selection starts with an overview, first read, How to choose a carved wall shelf for an interior, then proceed to the specific card.

  Practical example: a vase for the living room

  Suppose the vase has a base of 180 mm, a height of 420 mm, and a mass of 3 kg without water. First, obtain the working contour PKR-002. Then make a circle with a diameter of 180 mm and place it on the template.

  If the circle fits completely, leaving a free zone and the center is closer to the wall, proceed to the load. Add water and flowers to the mass of the empty vase. After confirming the mounting, transfer the mock-up to the wall and check the height.

  If a circle intersects the shaped edge, the customer does not try to "slightly push" the vase forward. They choose another shelf or another item.

  Practical example: a clock with a rear foot

  The clock is 210 mm wide, with a body depth of 120 mm and a rear foot that extends an additional 35 mm. The frontal size seems compact, but the total depth is about 155 mm.

  On the template, the body, the foot, and the space for accessing the mechanism are marked. If the rear decor PKR-002 takes up part of the platform, the clock may not fit into its working position. The decision is made based on the top view and side profile.

  Practical example: paired figurines

  Two shelves are placed on either side of the mirror. The figurines look similar, but their bases differ by a few millimeters. A separate template is made for each.

  The shelves are ordered at the same time, and the figurines are distributed before installation. On the wall, the mirror symmetry, height, and reflection are checked. This approach prevents a situation where one figure looks stable while the other stands closer to the edge.

  Practical example: an icon in a tall icon case

  The icon case has a small bottom rail but a tall frame. The base fits, but the center of gravity is far above the platform. Here, geometry does not provide a complete answer.

  It is necessary to check the tilt, the possibility of additional fixation, the shelf mounting, and the absence of a walkway nearby. If these conditions are not confirmed, choosing PKR-002 based only on the width of the bottom rail is not allowed.

  Why the article leads to a purchase, not replaces the product card

  The product card shows the item and available options. The article helps you arrive at the product card with the right questions. The buyer already knows which object will be placed, what parameters to request, how to check the drawing, and what to coordinate with the installer.

  This approach does not complicate the purchase for the sake of formalities. It separates decorative desire from technical compatibility. After verification, the decision becomes clear: order PKR-002, choose a different carved shelf, or change the object.

  What to do if the size of the work surface is not yet confirmed

  Sometimes the buyer has already chosen PKR-002 by style, but there is no technical top view yet. At this point, you don't need to replace missing data with assumptions. There are three safe paths.

  Request clarification and postpone the final order

  This is the main option if the shelf is being selected for an expensive, heavy, or fragile object. A few extra days for verification cost less than a repeat order and wall repair.

  Consider PKR-002 without tying it to a specific vase

  The shelf can be chosen as a decorative object, and the item can be selected after receipt. This path changes the original task: it is no longer the vase that dictates the size, but the actual surface that determines the future decor.

  Compare other models

  If technical uncertainty is not acceptable, open the category and Buy wooden shelves for the wall after checking the cards where the work surface is described in more detail. Another model cannot be considered suitable just because it seems larger.

  Acceptance of custom-made PKR-002

  Before finishing and installation, the shelf is inspected under good side lighting. The check is needed not to find abstract defects, but to confirm the specific order.

  Verify:

  • article PKR-002;

  • overall size;

  • beech or oak;

  • "Prestige" quality;

  • preparation for the selected finish;

  • number of items;

  • absence of damage;

  • shape of the work surface;

  • conformity to the drawing;

  • mounting points;

  • Completeness.

  If two shelves are ordered, place them side by side and compare the silhouette, platform, and threading. Natural wood may vary in grain, but the geometry of the paired composition should match the project.

  Control fitting before enamel or tinting

  The received shelf cannot be immediately sent for finishing just because the article number matches. First, the same check that was performed on paper is repeated.

  Procedure:

  1. place PKR-002 on a stable horizontal surface;

  2. place the item on the work platform;

  3. check all support points;

  4. evaluate free fields;

  5. view from the side;

  6. check the position of the center of gravity;

  7. photograph the composition;

  8. compare with the drawing;

  9. only then approve the finish.

  If the item does not fit, the problem is detected before painting. This preserves the opportunity to discuss another model without extra finishing work.

  Handing over the project to the installer

  The installer must receive not only a photo of the finished shelf. The set of working information includes:

  • technical drawing;

  • installation height;

  • the central axis;

  • wall type;

  • agreed fasteners;

  • number of points;

  • shelf mass;

  • item mass;

  • total protrusion;

  • position of neighboring objects;

  • photo of approved fitting.

  The phrase "hang approximately above the console" does not specify a safe position. Height affects the ease of installing the item, visibility of the threads, and the risk of accidental contact.

  Placement height depends on the item

  A low bowl, tall clock, and vase require different levels. The shelf may be higher than the usual furniture line, but the item must remain accessible for safe removal.

  Check:

  • eye height;

  • ability to lift the vase with both hands;

  • distance to ceiling;

  • adjacent cornice;

  • mirror height;

  • position of electrical outlets;

  • access for cleaning;

  • risk of hitting head or shoulder.

  There is no universal height for PKR-002. It is determined by composition and safety.

  After installation, the item is not placed immediately

  Fasteners and finishing materials may require technological time, which depends on the chosen system. The article does not assign a universal period. Before installing the vase, the installer confirms the assembly is ready for load.

  After that, a check is performed:

  1. the shelf has no noticeable play;

  2. the platform is in the design plane;

  3. the fastening is hidden or arranged according to the scheme;

  4. the object fully rests on the surface;

  5. the back decor does not push the object forward;

  6. the vase does not wobble;

  7. the passage remains clear.

  Care of the work area

  A carved shelf collects dust and requires careful cleaning. The object is periodically removed, so the free space around the base has practical benefit.

  When cleaning, do not use a random aggressive product without considering the finish. Enamel, tint, oil, or other coating require their own recommendations. First, clarify the finishing system, then choose the cleaning method.

  A heavy vase is not slid across the surface. It is lifted to avoid damaging the platform and the bottom base of the object.

  How to save data for future replacement

  After ordering, save:

  • product card;

  • a drawing;

  • dimensions W₂ and D₂;

  • template photo;

  • finish code;

  • material;

  • order date;

  • installation diagram;

  • fastener details;

  • item weight.

  If the vase is replaced in a few years, the new item is checked against the saved working area. There will be no need to re-measure the installed shelf in an awkward position.

  If the item changes after installation

  The shelf may be chosen for one vase, but later the owner may want to place a clock or a figurine. The new item undergoes the same check.

  It is necessary to:

  • measure the base;

  • compare with W₂ and D₂;

  • account for rear protrusions;

  • check the mass;

  • evaluate the center of gravity;

  • look at the composition;

  • ensure the load remains permissible.

  The fact that the previous vase stood safely does not confirm the compatibility of the new item.

  Three solutions for an item that barely fits

  Choose a different item

  The simplest path if PKR-002 already matches the wall and interior. A vase with a smaller base can preserve the overall concept without replacing the shelf.

  Choose a different shelf

  Rational if the specific item matters more than the model. Then to look at all carved wall shelves you need the same base template.

  Change the composition

  Sometimes the item can be placed on a console, and PKR-002 used for smaller decor. This is not a compromise, but a redistribution of roles.

  You cannot extend a heavy item over the edge or place a random additional platform without a design check.

  Why "almost fits" is a bad criterion

  In a store, a difference of a few millimeters seems insignificant. On an installed shelf, those millimeters can mean that one support point hangs over a shaped edge, the back leg of a clock presses against a thread, or a vase sits too close to the front boundary.

  Exact compatibility is not needed for pedantry. It ensures convenience, appearance, and predictable behavior of the item.

  Final verification sequence before payment

  Stage	Result to be obtained
  Measuring the item	Outline, height, mass, and center of gravity
  Checking the card	SKU, overall size, material, and preparation
  Requesting a drawing	W₂, D₂, platform shape and mounting
  Paper fitting	Base fits completely
  Wall marking	Overall dimension does not obstruct the room
  Load calculation	Mounting unit confirmed
  Material selection	Beech for enamel or oak for tinting
  Kit check	Clear what is included in the order
  Finish approval	Sample approved
  Order placement	Quantity and parameters fixed

  If one of the key stages is not completed, the purchase remains based on assumption.

  Additional questions before serial order

  For a hotel, restaurant, salon, or a series of identical interiors, a single check is not enough. Batch repeatability needs to be confirmed.

  Ask:

  • Can all shelves be produced in one batch?

  • Are mounting points identical?

  • How are products marked?

  • Can one template be kept?

  • How to coordinate finishing?

  • Is a reserve needed?

  • how paired parts are packaged;

  • can the order be repeated later.

  Serial work turns a single shelf into a system. Documentation becomes part of the result.

  PKR-002 as a decorative pedestal, not a storage shelf

  The main advantage of the model is revealed not by the number of items placed, but by the precise combination of one object and the carved base. Such a shelf should not prove capacity. Its task is to raise a vase, clock, or figurine to the desired level and integrate them into the wall's architecture.

  Therefore, the question "how much fits in total" gives way to "how convincing one chosen item looks." The working surface remains the technical foundation, and the free space is part of the design.

  Questions and answers about PKR-002

  What are the dimensions of PKR-002?

  The confirmed overall size is 415 × 355 × 225 mm. These values describe the external dimensions, not necessarily the working surface.

  What do A, B, and C mean?

  The dimensions need to be checked against the current drawing. Without an image, it is unsafe to assign a height, width, or depth to each letter based only on the usual sequence.

  Is 225 mm the useful depth?

  No confirmation. The value refers to the overall dimension, and the size of the horizontal platform needs to be clarified separately.

  Will a vase with a base of 180 mm fit?

  An answer is possible after obtaining the useful width, depth, and shape of the platform. A simple comparison with the number 225 mm is not enough.

  How to measure a round base?

  Measure the maximum diameter in several directions. Take into account protrusions, irregularities, and individual support points.

  How to check a shaped figurine?

  Take the width, depth, extreme points of the pedestal, the position of the main mass, and all protruding parts. Make a paper outline.

  Can a table clock be placed?

  Such a scenario is possible only after checking the rear leg, mechanism, wire, and full depth of the housing.

  Will a shelf for a candlestick fit?

  The geometry of the base can be checked. The permissibility of open flame is not confirmed by the initial data and requires a separate safety solution.

  Can PKR-002 be used for an icon?

  The possibility depends on the lower support, depth, tilt, mass, and mounting. A tall item may require additional fixation.

  What load does PKR-002 support?

  The numerical value is not confirmed in the original diagram. It is requested along with installation requirements.

  Does it include fasteners?

  The package contents are not confirmed. Before ordering, you need to find out whether wall mounting hardware, a template, and instructions are included.

  Is PKR-002 suitable for drywall?

  Without data on the partition structure, mounting, and mass of the item, a universal answer is impossible.

  What to choose — beech or oak?

  Beech is chosen for covering enamel, oak — for tinting and visible texture.

  What sanding quality is available?

  For PKR-002, the "Prestige" quality is confirmed.

  Can I order a shelf in the color of the wall?

  For beech, preparation for enamel is provided. The specific color and degree of gloss are approved based on a sample.

  Is oak suitable for transparent finishing?

  The card confirms the possibility of preparation for tinting. The specific finishing system is agreed upon separately.

  Why should the item have a free area around its base?

  The allowance helps to safely place the item, pick it up by hand, wipe the platform, and preserve the visible thread.

  What is more important — the base or the overall size of the vase?

  For stability, the base and center of gravity are more important. The overall size is needed to check the wall and adjacent space.

  Can the item protrude slightly over the edge?

  Protrusion allowance is not confirmed. For a tall or heavy item, this option cannot be considered safe by default.

  How is PKR-002 different from PKR-001?

  By overall size, scale, and its own construction. The working platform of each model is checked separately.

  Where can I read about PKR-001?

  You can open the material about where to place PKR-001 and what to put on it.

  How is PKR-002 different from Versailles 009-002?

  These are different products. Matching overall size does not prove matching platform, shape, and installation.

  Can the size of PKR-002 be changed?

  The possibility of custom manufacturing is not confirmed. Such a request is coordinated separately.

  Do I need to make a paper template?

  Yes, if the item has already been selected. The mock-up shows intersections with the shaped edge and the real free allowance.

  What to do if the drawing has not been received?

  Do not place an order for a specific item based on general figures alone. Continue requesting technical data or compare another model.

  How many shelves should I order for the mirror?

  For a symmetrical composition, usually two are considered, but the exact quantity is determined by the project. Both shelves are ordered in the same material and finish.

  Where can I see other carved shelves?

  Open the category and compare STAVROS shelves by size and shape.

  Where to buy PKR-002?

  The card allows order PKR-002 in beech or choose an oak modification after checking the drawing.

  Decision before ordering: check not the external size, but the space for the item

  The overall size of PKR-002 is 415 × 355 × 225 mm. It helps to assess the scale of the carved structure on the wall, but does not confirm that a vase base with a diameter of 180 mm, deep table clock, or a tall icon case will fully fit on the horizontal surface.

  Before purchasing, get the top view, useful width W₂, useful depth D₂, shape of the front edge, position of the rear decor, mounting diagram, and permissible load. Then make a template, place the item on it, and transfer the overall outline to the wall. Only after that choose beech under enamel or oak under tinting and approve the finish.

  On the STAVROS website, you can select PKR-002, compare it with other carved shelves, and place an order after technical verification. This procedure protects against the main mistake: a beautiful shelf on which the chosen item simply lacks working area.