STU-005 with a wooden seat or carved STU-007 for upholstery — which to choose

Buy a chair frame Buying separately makes sense when the customer needs not a random ready-made chair from the store, but a base for a specific finish, fabric, interior, and furniture set. However, the word "frame" itself unites very different products. STU-005 already forms the image of a light wooden chair with a solid seat, while STU-007 remains the basis for full upholstered furniture with custom upholstery.

The difference is visible not only in the decor. STU-005 is lower, narrower, and noticeably more compact in depth. It is easier to place around a small table, repeat as a set of four or six pieces, and use daily. STU-007 takes up more space, raises the backrest line to 1003 mm, and requires coordination with the scale of the dining room, wall height, table size, and the design of other furniture.

Both models are made from beech or oak solid wood. For beech, preparation for opaque enamel is provided; for oak, for semi-transparent tinting. "Prestige" sanding means the surface is ready for final finishing, but does not cancel the inspection, test coating, and technological preparation of the selected coating system.

It is especially important not to confuse STU-007 with a fully finished upholstered chair. The frame is supplied assembled, its parts are connected with a tenon-and-groove joint and additionally glued, but the upholstery must be created separately. The customer chooses the fabric, filler, decorative trim or furniture nails in advance, calculates the final seat thickness, and arranges with a craftsman.

If neither of the two models matches the project, it's better to choose a wooden chair frame in the category that also includes other bases. The comparative article helps understand the specific fork STU-005 or STU-007, and general design issues are covered in more detail in the material about how to choose a chair frame.

Confirmed specifications of STU-005 and STU-007

Our factory also produces:

View Full Product Catalog

STU-005 or STU-007: the main purchasing fork

When to buy STU-005

For a small kitchen

STU-005 has a moderate width of 484 mm and depth of 499 mm. These dimensions do not make the chair miniature, but allow easier arrangement of the set around a compact kitchen table than with the deeper STU-007. The buyer still needs to measure the space not only in the pushed-in position: the chair is pulled out for seating, and a passage must remain behind the seated person.

The laconic shape is useful where the kitchen is already saturated with facades, handles, appliances, and open shelves. The calm frame does not add another complex ornament and connects more easily with a modern table. The oak version supports the visible texture of the countertop or floor, while the beech version under enamel can match the color of the kitchen facades.

For such a task, you can buy a frame for a kitchen chair STU-005, but before ordering it is worth checking the height of the tabletop and the actual seat height according to the model drawing.

For everyday dining

In a daily dining room, the chair is constantly moved, pushed under the table, and used several times a day. Here, the minimalist design and wooden seat provide a clear care routine. No fabric that absorbs odors and requires separate cleaning, no decorative trim that can catch on clothing, no high carved backrest that takes up a significant part of the wall.

A wooden seat is not equal to a soft one. If the family is used to sitting at the table for a long time, you need to assess in advance the comfort of the contoured seat and anatomical backrest. If desired, you can use a removable cushion, but it changes the final height and appearance. You cannot automatically glue a thick soft layer to a finished wooden seat without design.

For cafes and small restaurants

STU-005 is suitable for commercial interiors where you need to repeat several identical chairs and maintain clear walkways. Compactness helps to arrange seating without feeling cramped. The minimalist form fits more easily into a modern cafe, coffee shop, meeting room, or office cafeteria.

For public spaces, beauty alone is not enough. You need to determine the intensity of use in advance, choose a durable finishing system, check stability on the finished floor covering, and plan maintenance. A solid wood chair can be refurbished, but this does not eliminate the need for regular inspection of joints and the lower part of the legs.

Before ordering a batch, it is reasonable to first get one sample, test it with a real table, evaluate the width between adjacent seats, and only then order the entire set. This approach reduces the risk that a formally suitable size will be uncomfortable in a specific layout.

For an office or home workspace

STU-005 can be used at a desk if the seating is designed for short work sessions and the table height matches the chair. This is not an adjustable office chair: the model has no height adjustment mechanism, armrests, or dynamic support. Therefore, for eight-hour work, you need to especially carefully check ergonomics and take breaks.

In the office, the oak frame supports bookcases, the tabletop, and wooden panels. White or colored enamel on beech helps make the chair visually lighter. The laconic silhouette does not conflict with the monitor, lamp, and shelves.

For Scandinavian and modern interiors

The flexible back and calm turned legs make STU-005 suitable for interiors where clear form and natural material are valued. It does not require a strictly classic setting. The frame can be tinted in light oak, made darker for contrast, or painted in a solid color.

The modernity of the model does not mean it must be only white or light. A deep dark shade can emphasize the silhouette, and rich enamel can tie the set to the wall or kitchen. The main thing is that all chairs in one group are finished with the same system and have the same degree of gloss.

For a set of four or six chairs

STU-005 is convenient for repetition. With a width of 484 mm, six chairs still require a sufficiently long table, but the overall composition remains lighter than a row of large carved frames. The buyer must consider not only the width of each item, but also the distance between them, the table legs, and the ability to sit freely from the end.

For a set, you can buy the STU-005 chair frame from one wood species and one batch. This simplifies matching the shade and identical finishing of all items.

When to buy STU-007

For a classic dining room

STU-007 creates a tall silhouette and a noticeable carved pattern. It suits a dining room where chairs should not be a neutral background but a full part of the architecture. Cabriole legs, profiled aprons, floral motifs, and a high backrest require a sufficiently large table and a free wall.

In a small room, such a frame can overwhelm the space. Its height of 1003 mm raises the backrest noticeably above the tabletop and makes the row of chairs an important horizontal-vertical system. Therefore, before purchasing, you need to make a full-size mockup or at least place rectangles of 517 × 631 mm for each seat on the plan.

For custom upholstery

The upholstery fields provide freedom in choosing fabric, padding, and decorative finishing. This is the main advantage of STU-007, but also a source of additional costs and decisions. Before ordering the frame, you need to determine who will do the upholstery, what thickness of the soft layer is needed, how the fabric will go onto the backrest, and where the piping will run.

The thickness of the padding changes the final seat height. If the seat is made too high, the knees will be closer to the tabletop, and the legs may lose comfortable support. If the soft layer is too thin, the expectation of comfort will not be met. The exact parameters should be agreed upon by a furniture craftsman based on the frame drawing.

For such a project you can buy a chair frame for upholstery, and select the fabric and padding together with the upholsterer, rather than after the wood finishing.

For an interior in the Louis XV style

The frame is stylistically linked to the French Baroque of the middle Louis XV period. It features S-shaped cabriole legs, acanthus, floral motifs, rocaille, and profile moldings. This form is best revealed next to a carved table, panels, mirror, console, or doors where a similar line language exists.

However, STU-007 does not have to be placed only in a historical reconstruction. In an eclectic interior, one or two chairs can provide contrast to a minimalist table and calm walls. For this technique to look intentional, at least one parameter must be repeated: wood shade, fabric color, lamp shape, or the character of metal hardware.

When the chair should become the main accent

The tall carved back makes STU-007 noticeable even without bright fabric. One chair can be placed by a console, desk, in a bedroom corner, or near a fireplace as a standalone piece. In this case, it is not necessary to buy a set, but it is important to finish the upholstery and detailing as carefully as for a formal dining room.

A single piece allows for choosing a more complex fabric, patina, trim, or decorative nails. However, aggressive gilding and contrasting upholstery can overload already rich carving. It is better to first assemble a sample combination on a small fragment.

For a restaurant, hotel, or salon

STU-007 is suitable for commercial spaces where furniture contributes to the brand image. In a restaurant, it can decorate a separate hall or VIP area; in a hotel, a lobby or room; in a salon, a waiting area. However, the large frame requires more space and more complex fabric maintenance.

For intensive use, it is necessary to choose durable upholstery, a resilient wood finish, and plan for repairs in advance. One spare frame or an additional volume of fabric from the same batch will help maintain a uniform look of the set in case of damage.

For a formal living room

In the living room, the STU-007 can be placed not at the dining table, but in a pair against the wall, next to a console, or used as a decorative armchair-like seat without armrests. The high backrest fills the vertical space and helps to design an empty wall section.

Before purchasing, you need to check whether the backrest blocks wall decor, a switch, or the lower part of a mirror. The depth of 631 mm requires a clear passage, especially if the chair is placed not at the table but separately.

If you need a particularly expressive piece, you can buy the carved frame of the STU-007 chair made of beech for enamel or oak for tinting.

How frame dimensions affect arrangement

Chair width and number of seats

The STU-005 has a dimension A of 484 mm, the STU-007 — 517 mm. The difference of 33 mm seems small for one item, but in a set of six chairs it turns into almost 200 mm of total width. Additionally, a gap is needed between adjacent chairs, and table legs may take up some space.

For a round table, the chair width affects the seating sector. The high backrest of the STU-007 makes a dense arrangement visually heavier. The STU-005 is easier to repeat around the circumference, but the exact number still depends on the tabletop diameter and base design.

Depth and pulling out

STU-005 has a depth of 499 mm, STU-007 — 631 mm. The 132 mm difference is noticeable in the passage. To the actual depth, you need to add the space the chair moves back when sitting and the area behind the seated person.

If the table is next to a wall, STU-007 may constantly touch the finish with its back or obstruct the passage. The plan should show two positions: chair pushed in and chair in use. Only then can you see if the room has enough width.

Backrest height

The total height of STU-005 is 778 mm, STU-007 — 1003 mm. The high backrest of the second frame creates a strong vertical rhythm and may overlap the lower part of wall panels. In a room with a low windowsill or radiator, this needs to be checked separately.

STU-005 hardly covers the space above the table, so a kitchen or small dining area looks lighter. STU-007 makes the furniture group more formal but requires a calmer wall and sufficient room height.

Checking with a real table

The best way is to mark the dimensions of each frame on the floor with painter's tape, place chairs of a similar scale, and simulate sitting. A paper plan helps but does not show how a person moves, pulls out the item, and walks with a tray.

If the table hasn't been purchased yet, first determine the frame model, then choose the table based on the number of seats. The reverse order is also possible, but then the chair dimensions must be limited by the actual length and width of the tabletop.

Wooden seat or upholstery

What the wooden seat of STU-005 provides

The concave wooden surface already forms the seat and preserves the integrity of the material. Such a chair is easier to clean, does not require fabric selection, and does not change appearance due to upholstery stretching. For the kitchen, cafe, and office, this is a practical advantage: it is enough to maintain the finish coating and monitor the lower part of the legs.

The comfort of a wooden seat is determined by shape, not softness. A concave seat distributes contact better than a flat board, the anatomical curve of the backrest supports the body, but the feeling remains firmer. A buyer accustomed to thick padding should check the seat in advance or consider a removable cushion.

The removable cushion should not slip and should not cover the beautiful shape of the frame. Its thickness affects the position of the knees relative to the table. If a soft accessory is needed constantly, it may be more rational to immediately choose a frame for full upholstery.

What the soft seat STU-007 provides

Fields for fabric upholstery allow you to create a seat and backrest for a specific user and interior. You can choose the density of the padding, the tactile feel of the fabric, the pattern, the piping, and the method of decorative finishing. As a result, the same frame can look restrained, theatrical, historical, or modern.

Freedom requires a precise project. Thick padding can hide part of the carved apron, too voluminous a backrest will disrupt the curve of the frame, and a large fabric pattern can get lost on a small field. The upholsterer must receive the frame or its exact drawing before cutting the materials.

How padding thickness changes the seat

The final seat height of the STU-007 appears only after installing the base, padding, and fabric. Added centimeters reduce the distance to the lower plane of the tabletop. A person may feel cramped, even if the frame itself fits the table in dimensions.

Thickness also affects the visual character. A thin seat looks more historical and emphasizes the wood, while a voluminous one looks more modern and softer. You cannot choose a material based only on a catalog photo without checking the overall profile of the chair from the side.

How to choose fabric

For the kitchen and restaurant, abrasion resistance, cleanability, and color stability are important. For a bedroom or formal living room, a more delicate fabric can be chosen, but the usage conditions must still be clear. A light solid material emphasizes the carving, while a large pattern draws attention to itself.

It is advisable to buy fabric for the entire set in one batch with a small reserve for repairs. A repeat shade after a few years may differ. The upholsterer calculates the consumption considering the direction of the pile, pattern repeat, backrest, and piping.

Piping, braid, or furniture nails

The method of edge finishing affects the style. Piping makes the transition neat and soft, decorative braid supports the classic character, and furniture nails create a graphic outline. However, the specific option must match the frame margins and not damage thin areas of the wood.

You don't need to choose the decorative finish before deciding on the wood color. Golden metal next to cold gray enamel looks different than next to warm oak. First, assemble a palette from a sample of wood, fabric, and metal detail.

When a wooden seat is more practical

It is more convenient for a kitchen, cafe with frequent cleaning, office, waiting area with short seating time, and a home with children or pets. The surface does not absorb dirt like fabric, provided there is a quality protective coating.

When upholstery is justified

It is needed for long family dinners, a formal dining room, a hotel room, a restaurant focused on comfort, a bedroom, and a living room. Upholstery also helps tie the chair to curtains, a sofa, or wall panels. But this effect is only achieved with professional material selection.

Beech or oak for the chair frame

Beech for enamel

Beech in both models is prepared for an opaque coating. The slats may differ in tone and texture because the finish will cover them. This is a rational choice for a white, black, gray, rich colored, or patinated chair.

For STU-005, the enamel emphasizes the purity of the form and makes the set look like ready-made modern furniture. For STU-007, the color works more complexly: light enamel reveals the relief through shadows, dark enamel makes the carving graphic, and patina highlights the recesses. Any decorative effect is first tested on a sample.

Oak for tinting

Oak is chosen if the natural grain should remain visible. The porous texture adds depth to the laconic STU-005 and supports the historical character of STU-007. Semi-transparent tinting allows the wood to be made lighter, warmer, or darker, but does not turn different batches into absolutely identical surfaces.

For a set of chairs, it is better to order all frames at the same time. After a test coating, the items are sorted by shade and finished with one system. This way, natural variation is distributed evenly, and one item does not stand out from the group.

How to match the frame with the table

Matching the wood species is not necessary. Oak chairs can stand next to a painted table, and white beech chairs next to a natural tabletop. It is important to match at least one parameter: shade temperature, gloss level, leg shape, or metal color.

Attempting to get the exact color of an oak tabletop from a photo often results in discrepancies. You need to compare real samples in the room's lighting. If the table is already ready, the test coating of the frame is placed next to it vertically and horizontally, because light falls differently.

What does "Prestige" sanding mean

On the STAVROS quality page, it is stated that an item in "Prestige" quality undergoes detailed hand sanding and is ready for finishing. Minor fuzz or milling marks are allowed on a small part of the surface. Therefore, before priming, the frame is still inspected under side lighting and gently dusted.

More details about the difference in preparation can be found on the page beech for enamel or oak for tintingIn the article itself, it is important to understand the practical conclusion: "Prestige" reduces the amount of preparation but does not replace the technology of the chosen coating.

How to choose a frame for a specific interior

Modern kitchen

STU-005 is usually more appropriate due to its height of 778 mm, moderate depth, and lack of complex carving. It does not block the kitchen group with a high backrest and is easier to repeat as a set. White, graphite, or colored enamel can match the facades, while oak tinting can match the wooden countertop.

Kitchen-living room

Here, the choice depends on the role of the dining area. If it should blend into the overall space, STU-005 is suitable. If the dining group becomes a formal center and there is classic furniture nearby, STU-007 can be used. It is important to check whether its high backrest and carving conflict with the sofa and kitchen island.

Classic dining room

STU-007 is best revealed when the table, lamp, walls, and textiles support the scale. It does not necessarily need to be finished with gold or complex patina. Solid enamel and calm fabric allow the form to be preserved without theatricality.

Minimalist office

STU-005 adds a natural material but does not overload the work area. The oak version suits a massive table, while the painted version suits modern furniture. For long-term work, you need to check the fit in person, as the chair is not adjustable.

Formal office

One STU-007 at a desk can become the main item. The high backrest creates a stately silhouette. At the same time, the fabric must withstand daily contact with clothing, and the depth of the frame must allow you to freely push back from the table.

Bedroom

STU-005 is suitable for a vanity table in a modern bedroom. STU-007 looks better as a separate carved piece near a console, next to a dressing room, or in a reading corner. The upholstery connects it to the headboard and curtains.

Hallway

Compact STU-005 can be used as a place to change shoes if the passage width is sufficient. STU-007 is deeper and taller, so it is only suitable for a spacious hall. The fabric in the hallway should be easy to clean.

Cafe and coffee shop

STU-005 is easier to arrange more densely and maintain. It suits establishments with a modern or Scandinavian character. For a restaurant with a historical interior, STU-007 may be more appropriate, but the number of seats in the same area will decrease.

Hotel

STU-005 is suitable for a room, desk, or breakfast area. STU-007 is for the lobby, suite, restaurant, or formal area. In both cases, it is important to have a finish specification and a supply of material for repairs.

Showroom or salon

One STU-007 can serve as a display item and enhance the brand image. STU-005 is convenient for a meeting room and waiting area, where furniture should be neat but not distract from the products.

How many frames to buy

One item

One STU-007 can be used at a console, vanity, or writing desk. One STU-005 can be used as a work chair or extra seating. For a single item, a bolder finish is acceptable because it does not need to be repeated six times.

A pair of chairs

Two items are suitable for a small table, bedroom, or symmetrical area. For STU-007, a pair often looks more convincing than one: carved frames can be placed at the ends of a table or against a wall. It is important to order the same fabric and mirror the pattern if required.

Four chairs

This is a common set for the kitchen and dining room. STU-005 is easier to place around a square or rectangular table. For STU-007, a larger perimeter is needed, especially due to the depth of 631 mm.

Six or more

Before ordering, a layout diagram is mandatory. You cannot simply multiply the chair width by the quantity and consider the task solved: gaps, table corners, end seats, and passageways are needed. For a commercial project, it is useful to first test one fully finished sample.

Spare frame

In a restaurant or hotel, an additional frame helps quickly replace a damaged item. For home use, a spare is usually not needed, but it is worth keeping the fabric, coating formula, and article number. The decision depends on the project scale and the possibility of reordering.

What to buy and order together with the frame

STU-005 primarily requires a finishing system and floor protection elements. STU-005 additionally needs a soft part base, filler, fabric, decorative finishing, and upholsterer work. Since there are no confirmed product URLs for fabric and filler in the SEO scheme, links to random categories cannot be added.

General frame solutions can be compared in the section Buy a chair frame. Specific model characteristics are checked in the product cards before placing an order.

How not to confuse the frame with a finished chair

STU-005 is closer to a finished wooden item but requires finishing

The model already has a wooden seat and a formed backrest, so after high-quality finishing it looks like a finished chair. However, the card offers an unpainted solid wood frame. The buyer needs to choose enamel or tinting, protect the surface, and check the legs on the finished floor.

STU-007 is specifically a base for upholstered elements

Wooden carved chair and carved frame

The query "wooden carved chair" often implies finished furniture. In the case of STU-007, the buyer receives a carved wooden frame that still needs finishing and upholstery. The article should honestly address this difference so that expectations match delivery.

Chair frame and armchair frame

An armchair usually has armrests and requires more space. STU-005 and STU-007 are chair frames without armrests. If a wider seat and arm support are needed, look at a different product group rather than trying to add armrests to the finished structure.

Blank and random joinery assembly

A finished frame has a specific geometry, joints, and drawing. A random set of legs, stretchers, and a backrest does not yet make a chair. Self-assembly requires precise joinery, templates, and angle calculations. Purchasing a ready-made base eliminates these operations, leaving the customer with finishing and upholstery.

Practical selection for specific situations

Need four chairs for a table in a small kitchen

First, measure the length of each side of the tabletop and the position of the legs. If space is limited, STU-005 seems more rational. Mark four rectangles 484 × 499 mm on the floor and add space for pulling out. Check that the back legs do not intersect with the table base.

Need two statement chairs at the ends of the table

You can combine STU-007 at the ends with more subdued chairs along the long sides. This technique only works with a unified finish or common fabric. High backrests should not block the lamp and panel behind the table.

Need one chair for the dressing table

STU-005 fits a modern bedroom and takes up less space. STU-007 is chosen if the dressing area is classic and a soft seat is needed. Check the tabletop height and the ability to slide the frame under it.

Need to update the cafe without a full interior replacement

STU-005 is easier to integrate into an existing modern setting. It can be painted in a new brand color or tinted. Before ordering a batch, test one frame after full finishing, because floor sliding and seating comfort depend on the finished state.

Need to furnish a historic restaurant

STU-007 supports French classic, baroque, and eclectic styles. But the fabric, piping, and wood color must match the overall concept. Avoid using too many different ornaments at once: the frame carving already creates a rich pattern.

Need a chair for painting in the wall color

Choose beech for enamel. STU-005 in the wall color becomes calmer, STU-007 retains relief due to shadows. Coordinate the shade based on a real paint sample, not on screen.

Need a chair with visible oak texture

Choose oak for tinting. On STU-005, the texture emphasizes minimalist surfaces. On STU-007, it interacts with the carving and can look more saturated. A light tone preserves form readability, a very dark one enhances contrast.

Need the softest possible seat

STU-007 provides upholstery fields, but the maximum thickness should not be determined solely by the desire to make the seat softer. A too-high layer disrupts the fit at the table and covers part of the frame. The density and thickness are calculated by the upholsterer.

Need to minimize fabric maintenance

STU-005 with a wooden seat is simpler. The finish coating is chosen for frequent cleaning, but aggressive agents are still prohibited. A removable cushion is possible as a separate accessory.

Need to create a series for a hotel

Save the article, wood species, coating formula, fabric, cut direction, and glider type. For STU-007, an upholstery template is additionally needed. The sample is approved before producing the entire batch.

Frame preparation for finishing

Inspection before starting work

Check the size, material, and sanding quality. For STU-007, inspect the threads, upholstery fields, and all transitions. For STU-005, inspect the wooden seat, backrest curve, and lower leg ends. Damage is recorded before coating application.

Stability control

Place the frame on a flat surface and make sure it does not wobble. A serious geometric error cannot be compensated for with a thick support pad. Minor imperfections in the finished floor are accounted for after finishing, but the basic structure must be stable.

Dust removal

After sanding, dust remains in the threads and joints. It is removed with a soft brush and a method compatible with the coating. Wet cleaning before finishing is only permissible according to the technology of the selected material.

Test paintout

A sample is mandatory for oak and useful for beech under enamel. It is used to check color, coverage, gloss, and how the coating behaves in recesses. For the set, one sample is approved and all frames are compared to it.

Protection of joints and upholstery fields

A thick layer of paint should not interfere with the upholsterer's subsequent work. The attachment points for fabric, bases, and decorative trim are agreed upon in advance. Hinges, holes, and technical areas are not filled with coating unnecessarily.

Order of finishing and upholstery

Wood is usually finished before installing the fabric to avoid staining the material and to treat hard-to-reach areas. But the upholsterer must inspect the frame in advance and confirm that the finish will not cover the required fields. After painting, the frame is completely dried before upholstery work.

How to organize upholstery STU-007

Provide the master with the frame or drawing

Verbal description is not enough. The upholsterer must see the fields, the curve of the backrest, the side rails, and the carved decor. It is better to agree on the design before purchasing the fabric, because the shape affects consumption and cutting.

Make a test soft package

For a series of chairs, first assemble one sample. Check the seat thickness, back support, fabric tension, and rear view. Only after approval, repeat the remaining items.

Consider the pattern and nap

The direction on the back and seat must be aligned. Velvet and velour change shade with different nap. Center the ornament, and for a pair of chairs, decide whether the pattern should be identical or mirrored.

Do not cover the carving

The soft layer and decorative trim must not overlap the acanthus, rocaille, and profile moldings. Otherwise, the frame loses the purpose for which it was chosen. The upholstery field follows the contour, not expanding arbitrarily.

Check the back side

The chair is visible not only from the front. In the dining room, the backs face the room, so the back fabric, piping, and fastening must be done neatly. The high back of STU-007 is especially noticeable.

Mistakes when buying a chair frame

Choosing only by photo

The photo does not show the actual depth and height. STU-007 may appear slim, but it takes up 631 mm in depth and has a back over a meter high. Full-size marking is mandatory.

Do not count the table

The chair is purchased separately, and then it is discovered that the table legs interfere with seating or the seat is too high after upholstery. The frame, table, and soft package must be considered as one system.

Count STU-007 as a ready-made upholstered chair

The frame has margins for upholstery, but the fabric and padding require a separate order. The budget and timeline must include the craftsman's work.

Expect softness from STU-005

A concave wooden seat is more ergonomic than a flat one, but remains hard. If a permanent soft layer is needed, compare the model with a frame for upholstery.

Ordering beech under clear lacquer

Beech is prepared for enamel, so the slats may vary in color. For visible texture, oak with tinting is more rational.

Completely paint oak with expensive enamel

Thus, the buyer pays for the material and selection of slats, but hides the pattern. If a covering color is needed, beech usually suits the task better.

Do not count the cost of upholstery

The frame price is only part of the STU-007 project. Fabric, filling, base, edging, and labor are added. Comparing models only by the card is incorrect.

Buying a large batch at once without a sample

Even confirmed dimensions do not show how the chair behaves with a specific table. One fully finished item allows you to check the seating, color, and care.

Using different batches of fabric

The shade and pile may differ. For a set, the material is purchased in one volume with a reserve.

Not protecting the legs from the floor

A hard glider can scratch parquet, a soft one can slide poorly on carpet. Protection is chosen for the actual flooring and checked after installation.

Too thick upholstery

It raises the seating and covers part of the apron. Comfort does not increase infinitely with thickness. Density, shape, and support are important.

Accidental patina on complex carving

Patina emphasizes the recesses, but excess makes STU-007 visually dirty. First, approve the sample on a similar relief.

Ignore delivery route

STU-007 is delivered assembled and in a rigid box. Need to check doors, stairs, elevator, and turns. The frame cannot be disassembled on site.

Who STU-005 is suitable for

The model is suitable for the owner of a small kitchen, cafe, office, modern dining room, or meeting room. It is useful for those who want a wooden seat, a calm silhouette, and a simpler route from purchasing the frame to the finished item.

STU-005 is especially appropriate for a set of several identical chairs that should look light. Beech under enamel suits colored furniture, oak under tinting suits an interior with natural wood.

Who STU-005 may not suit

The model will not satisfy a buyer who needs a permanent soft backrest and thick seat, a high formal silhouette, or complex carving. For a historical interior, it may be too restrained.

Who STU-007 is suitable for

The frame is designed for a buyer who wants to create a custom upholstered chair, is ready to work with an upholsterer, and has sufficient space. It suits a classic dining room, living room, restaurant, hotel, and eclectic interior.

STU-007 is especially valuable when the fabric and wood finish need to match existing curtains, panels, table, or other carved furniture. The frame becomes the foundation of a custom piece, rather than a neutral household seating.

Who STU-007 may not suit

The model will be redundant in a cramped kitchen, a very minimalist interior, a project with no budget for upholstery, or a situation where the chair is needed ready-made without additional work. The high backrest and depth require space, and the fabric requires care.

How to buy STU-005 or STU-007 on STAVROS

First, choose the scenario: wooden seating or custom upholstery. Then measure the table and room, create a layout diagram, determine the number of frames and material. For beech, a covering enamel is chosen in advance; for oak, a semi-transparent tint.

In the STU-005 card, check the size 484 × 778 × 499 mm, material, and current order conditions. In the STU-007 card, check the size 517 × 1003 × 631 mm, assembled delivery, upholstery margins, and timelines. Availability and price may change, so they are verified just before placing the order.

For minimalist furniture, you can buy a compact wooden chair frame. For a classic project — buy a classic solid wood chair frameIf you need a different size or style, open catalog of chair frames.

What to Check Before Ordering

• frame dimensions and drawing;
• table height and design;
• space between table legs;
• space for pulling out;
• width of passage behind a seated person;
• number of chairs in the set;
• beech for enamel or oak for tinting;
• color and gloss level of finish;
• wooden seat or upholstered cushion;
• thickness of STU-007 filler;
• fabric, repeat and pile direction;
• method of closing the upholstery edge;
• work of the finisher and upholsterer;
• floor material foot pads;
• delivery route of the assembled frame;
• storage location before finishing;
• one production batch of the kit;
• fabric reserve for repairs;
• current price, availability and lead time;
• ability to check one finished sample.

How to accept the frame after delivery

Check the article number and material

For STU-005, check the size 484 × 778 × 499 mm, beech or oak, and "Prestige" quality. For STU-007 — 517 × 1003 × 631 mm, material, upholstery margins, assembled condition, and rigid packaging. The error must be detected before finishing.

Inspect the surface under side lighting

This reveals grain, milling marks, minor damage, and areas requiring attention before priming. For STU-007, the thread recesses are checked separately; for STU-005, the seat plane and backrest curve.

Check stability

Place the frame on a level floor. It should not wobble or have an obvious tilt. The check is performed without aggressive load and before installing random leveling feet.

Compare the set

If multiple frames are ordered, place them side by side and compare dimensions, wood shade, oak grain pattern, and symmetry of parts. Natural material variation is acceptable, but the set must be consistent with the selected finish.

Do not start painting immediately

First confirm the arrangement, fitting at the table, and technology. After applying the finish, correcting errors becomes more complicated.

Care for finished chairs

STU-005 with wooden seat

Dust and household dirt are removed with a soft cloth and a product compatible with the finish. Do not leave water on the seat and joints. Abrasives alter the gloss and damage the protective layer.

STU-007 with fabric upholstery

Care is determined by the fabric. Remove dirt according to the material manufacturer's recommendations. Do not wet the upholstery excessively so that moisture reaches the wood, padding, and fasteners.

Bottom part of legs

Check the glides periodically. A worn element scratches the floor and changes stability. Sand and small debris under the leg act as an abrasive.

Checking connections

If squeaking, play, or misalignment occurs, the chair is taken out of use until inspection. Do not continue using it hoping the problem will resolve on its own.

Surface Restoration

The lifespan depends on usage intensity and the finishing system. For repairs, you need to know what the frame was coated with. Therefore, the formula for primer, color, tint, and protective layer is kept together with the order documents.

How to approve one sample before ordering a set

Check the seating at a real table

One fully finished chair shows what is not visible in the drawing: whether it is comfortable to sit, whether there is enough room for knees, whether the legs catch the table base, and whether one can freely pass behind a seated person. For STU-007, the sample is assembled with the same upholstery package planned for the entire batch.

Evaluate the color under different lighting

The frame should be viewed in the morning, evening, and with lights on. A warm lamp changes the shade of oak and enamel color, while velvet or velour on STU-007 may appear lighter or darker depending on the nap direction. The sample is placed next to the table, floor, and wall, not evaluated separately in the workshop.

Check movement and sound

The chair is moved back and forth several times, sat on and stood up from. The glides should not scratch the floor, the frame should not squeak, and the upholstery should not shift. In a cafe or restaurant, it is useful to check how easily staff can move the item and whether the fabric catches on the table edge.

Record the specification

After approval, the article, breed, quality of preparation, primer and finish formula, color code, fabric, batch number, filler density, edge method, and heel type are preserved. This specification is needed not only by the manufacturer. It allows repairing one item or ordering an additional frame a year later without accidental discrepancies.

Do not change parameters in the middle of a batch

If after the first sample you want to increase the seat thickness, change the color or another fabric, it is better to first reassemble and re-approve the test chair. A small change can affect the seat height, material consumption, and visual balance of the entire set.

Final sample approval protects the project budget, upholstery deadlines, and the uniform appearance of the entire furniture group.

Frequently asked questions

How does STU-005 differ from STU-007?

STU-005 is more compact, has a laconic shape, and a wooden concave seat. STU-007 is larger, richly decorated with carvings, and provides individual upholstery for the seat and backrest.

What are the dimensions of STU-005?

The confirmed dimension is 484 × 778 × 499 mm. Before purchasing, you need to check the drawing and fit the size to the table and passages.

What are the dimensions of STU-007?

The confirmed dimension is 517 × 1003 × 631 mm. The high backrest and large depth require spacious arrangement.

Which frame is better for a small kitchen?

STU-005 is often more suitable: it is lower and less deep. But the final decision depends on the table size, number of seats, and aisle width.

Which frame to choose for a classic dining room?

STU-007 better supports a formal classic interior thanks to cabriole legs, a high back, and carved decor.

Does STU-005 have a soft seat?

No. The model has a concave wooden seat. It shapes the seating but does not replace padding and fabric.

Is upholstery included in STU-007?

The card confirms fields for upholstery, but the finished fabric and padding need to be agreed upon separately. The specific configuration is always checked before ordering.

Can STU-007 be used without upholstery?

The frame is intended for further soft finishing. Using it without changes the intended comfort and appearance. The decision should be coordinated with a furniture craftsman.

Which material should I choose for white enamel?

Beech. It is prepared for opaque coating. For visible natural texture, it is better to choose oak.

Which material to choose for tinting?

Oak. Its lamellas are selected for semi-transparent finish, although natural differences in shade and pattern are preserved.

Can beech be coated with clear varnish?

Technically, coating is possible, but preparation "for enamel" allows contrast of lamellas. If the texture should be visible and consistent, choose oak for tinting.

Can oak be painted with opaque enamel?

It is possible, but then the meaning of the material and texture selection is lost. For a solid color, it is more rational to consider beech.

What does "Prestige" sanding mean?

The surface undergoes detailed manual sanding and is ready for finishing. Before priming, inspection and dust removal are still carried out.

Is STU-007 supplied assembled?

Yes. The card indicates assembled delivery, tongue-and-groove joints with additional gluing, and a rigid box.

How to deliver STU-007 to the apartment?

Before ordering, measure doorways, elevator, staircase, and turns. Disassembling the finished frame on site is not recommended.

How many chairs can fit at the table?

It depends on the length and shape of the tabletop, the base legs, and the gaps between people. STU-005 with a width of 484 mm is more compact than STU-007 with a width of 517 mm.

Why is chair depth so important?

It determines the space when pushed in and the size of the seating area. STU-007 is 132 mm deeper than STU-005, which is noticeable in a narrow room.

Which frame is better for a cafe?

For a dense modern layout, STU-005 is usually more convenient. STU-007 is suitable for a restaurant or a formal area where decor matters and there is more space.

Which frame is better for an office?

STU-005 is suitable for a minimalist workspace. STU-007 is chosen for a formal office and soft seating. For long-term work, ergonomics should be checked in person.

Can I put a cushion on STU-005?

Yes, as a removable accessory if it doesn't slip. The thickness of the cushion changes the seat height, so it should be checked at the table.

How to choose filler for STU-007?

The upholsterer selects density and thickness considering the frame margins, user weight, and final seat height.

How to choose fabric for a restaurant?

A durable fabric suitable for regular cleaning is needed. Consumption is calculated with a reserve and purchased in one batch.

Are furniture nails necessary?

Not necessarily. The edge can be finished with piping or braid. The method is chosen based on style, fabric, and upholstery field design.

Can STU-005 and STU-007 be combined at the same table?

STU-007 can be used at the ends and STU-005 along the long sides if they are unified by trim, fabric, or color. The difference in height and depth should be checked on the plan.

Is it necessary to order all frames at the same time?

For a set, this is advisable. It makes it easier to get one wood species, match the natural grain, and finish the items uniformly.

Is a spare frame needed?

Usually not for a home. For a restaurant, hotel, or large series, a spare item can reduce downtime during repairs.

How to protect parquet?

Use glides compatible with the floor material and leg shape. They need to be cleaned regularly and replaced when worn.

Can the frame be used immediately after delivery?

The frame needs to be inspected, finished, and for STU-007, upholstered. Unpainted wood is not designed for full use without a protective finish.

Where to buy STU-005?

The model is presented in a separate STAVROS card. There, the material, size, current price, availability, and delivery time are checked.

Where to buy STU-007?

The carved frame is available in a separate card. Before ordering, you also need to agree on the future upholstery and delivery route.

Where can I see other frames?

In the chair frames category, you can compare STU-005, STU-007 and other models by shape, size and style.

Summary: STU-005 for a compact wooden seat, STU-007 for a carved upholstered chair

STU-005 and STU-007 are not two versions of the same chair. The compact STU-005, measuring 484 × 778 × 499 mm, is suitable for a kitchen, cafe, office and everyday dining room. Its anatomical backrest and concave wooden seat allow you to create a finished piece after the solid wood finishing.

STU-007 measures 517 × 1003 × 631 mm and is designed for a different scale. The high concave back, cabriole legs, acanthus, flowers, and rocaille make the frame the foundation of a formal classic chair. The upholstery fields allow you to choose fabric and padding, but require a separate budget, a craftsman, and precise seating calculation.

Before purchasing, you need to match the frame with the table and room, determine the number of items, choose beech for enamel or oak for tinting, agree on the finish and floor protection. For STU-007, fabric, soft padding, edging and delivery of the assembled product are additionally calculated.

At STAVROS, you can go from a general request to a specific model: buy a beech chair frame for enamel STU-005 for a minimalist set or buy a carved wooden chair as a STU-007 frame blank for custom upholstery. If you need a different size, open oak and beech chair frames and choose a base that matches the actual table, room, and finishing method.