The carved baguette looks good in the photo, but the scale is unclear: should I first order a wooden K-070 with a length of 300 mm, and then buy 2000 mm linear molding for the study?

The carved ornament K-070 reads well in a large product photo, but the screen says almost nothing about how massive the profile will be on a specific cabinet, door portal, or library composition. It is especially difficult to choose between two cross-sections — 22×13 and 38×22 mm. On the card, both look related, but on furniture, the difference in scale can completely change the impression.

K-070 has a practical advantage for this situation: besides the long 2000 mm run, the manufacturer offers standalone products 300 mm long in both cross-sections. So you don't have to start the project by purchasing the entire footage. You can first order a short K-070 in the desired wood species and sanding, hold it against a real facade, check the scale of the carving, and only then calculate the main batch.

It is important to understand this scheme correctly: 300 mm is not a free sample or a special test piece, but a full-fledged product item. It helps to check the size and character of the profile, but by itself it does not prove how the joints and the rhythm of the ornament will look on a line several meters long. For a long frieze, after the fitting, a separate cutting plan is still needed.

If you already like the shape and want to first see it in real scale, you can open Wooden molding K-070 and start with the suitable 300-millimeter item.

Go to Catalog

Wooden baguette K-070: what sizes and prices are available now

K-070 is a carved wooden molding with a "swamp leaf" ornament. The card features beech and oak, Standard and Prestige sanding options, "Under enamel" preparation, and custom production with an average lead time of 5–10 days.

The current size chart looks like this:

Cross-section and length	Beech Standard	Beech Prestige	Oak Standard	Oak Prestige
22×13×300 mm	830 ₽	1 290 ₽	940 ₽	1 320 ₽
38×22×300 mm	990 ₽	1 670 ₽	1 220 ₽	1 770 ₽
38×22×1000 mm	3 310 ₽	5 550 ₽	4 060 ₽	5 910 ₽
22×13×2000 mm	5 570 ₽	8 580 ₽	6 240 ₽	8 810 ₽
38×22×2000 mm	6 610 ₽	11 100 ₽	8 120 ₽	11 810 ₽

There is an important assortment asymmetry: the 1000 mm length is only available for the 38×22 mm cross-section. For 22×13 mm, the current table includes 300 and 2000 mm.

The card also warns about a rigid packaging frame costing 390 ₽. For the 22×13 mm cross-section, the norm is up to 35 items per frame; for 38×22 mm, up to 15. Therefore, in a large estimate, packaging should be accounted for as a separate line and confirmed against the actual order composition.

Why order K-070 with a length of 300 mm first

The short version is useful not because 300 mm is enough for finishing a cabinet, but because it allows replacing an approximate impression from a photo with real verification.

Several things can be assessed on site at once.

Scale of the ornament. A pattern that seems delicate on a monitor may look noticeably larger next to a furniture facade.

Profile cross-section. 22×13 and 38×22 mm differ not only in width but also in depth. When viewed from the side, the larger K-070 protrudes more.

Proximity to the facade. A short piece can be held against the door frame, upper frieze, panel, or cornice to see whether the ornament conflicts with the existing geometry.

The wood species. Beech and oak are perceived differently, especially if the wood is meant to remain visible.

The future finish. On a short piece, you can separately approve the finishing technology without subjecting the entire two-meter batch to an experiment.

There is also a limitation. At 300 mm, you cannot reliably assess the entire long composition. On a short fragment, you see the local pattern, but it is not necessarily clear where the joints will fall along a 4–5 meter line or how the ornament repeat will read on large furniture.

Therefore, 300 mm is a good first physical test, not a substitute for a full layout.

Our factory also produces:

View Full Product Catalog

22×13 or 38×22 mm: how different are the two scales of K-070

The difference between the two profiles is already noticeable in the numbers.

By the first dimension:

38 − 22 = 16 mm.

By the second:

22 − 13 = 9 mm.

The larger cross-section is about 73% wider relative to 22 mm and about 69% deeper relative to 13 mm. This does not mean it is "70% more beautiful" or "70% more massive" visually. Percentages only show: this is not a small adjacent size, but a significantly different scale of one pattern.

K-070 22×13 mm

It is worth checking it first where a more delicate decorative band is needed: on a door frame, a narrow furniture frieze, next to already rich carving, or in a composition where molding should support the architecture rather than become the main element.

K-070 38×22 mm

This option makes sense to check if the ornament should be readable from a distance, work on a large library cabinet, a wide portal, or a massive furniture group.

But the rule "large furniture — only 38×22" is too crude. On a large cabinet, there may be many other details, and a thinner profile will give a more cohesive result.

It is better to take a photo of the entire study wall, overlay both cross-sections to scale, and then confirm the chosen option with a real 300-millimeter product.

Where it is appropriate to check K-070 in a study

The manufacturer's card directly lists studies, cabinets, doors, nightstands, kitchens, beds, and other interior applications. For an article about a study, it is more useful not to expand this list, but to analyze several specific zones.

Cabinet-library

K-070 can be considered as a linear accent on the upper frieze or around individual architectural fields. Here it is especially important to compare the cross-section with the width of the posts and frames.

Door portal

The profile should work together with the casing and the upper part of the portal. If the adjacent decor is already large, 38×22 may be excessive.

Upper frieze of a built-in cabinet

On a long horizontal line, not only the cross-section but also the quality of joint layout is clearly visible. It is here that the short 300-mm K-070 confirms the scale but does not replace the calculation of two-meter elements.

Local insert on furniture

If only a short decorative section is needed, 300 mm may turn out to be not a test but a full-fledged final part of the project. This is another reason not to call this item a "sample."

First check 300 mm or immediately buy two-meter linear molding

The decision depends on the project stage.

If the cabinet exists only in the visualization and the designer is still choosing between 22×13 and 38×22, the short product provides a lot of information for a relatively small cost.

For example, Standard beech:

• 22×13×300 — 830 ₽;
• 38×22×300 — 990 ₽.

For oak Standard:

• 22×13×300 — 940 ₽;
• 38×22×300 — 1 220 ₽.

That is, a real check of two scales costs significantly less than an erroneous order of several two-meter products.

If the cross-section is already approved on a real object, there is a working layout and the finish is known, an intermediate purchase of 300 mm may be unnecessary. Then it is more logical to calculate the main footage immediately.

The verification stage is needed not as a rule, but when it removes real uncertainty.

Beech or oak: short K-070 helps choose the material before a large batch

K-070 is available in beech and oak.

With opaque enamel, the choice of wood species still cannot be considered insignificant. These are different product variants, and the project must specify the material in advance.

If a semi-transparent finish or preservation of the natural grain is planned, a real 300-millimeter piece is especially useful: it can be placed against existing furniture and the texture can be seen in the same room.

But the short K-070 does not guarantee an absolute match of shade and grain for the entire future batch. Wood is natural, so the task of the short position is to confirm the selection principle, not to promise the identity of every two-meter element.

For the entire long line, it is better to place the main order as one specification: one material, one cross-section, one sanding level, and one finishing task.

Standard or Prestige: we check not the name, but the scope of subsequent work

The K-070 card offers Standard and Prestige options.

These are grinding quality levels, not ready-made colors or coating names.

For a small volume, a craftsman may prefer one preparation level, for a long batch — another, if it saves further manual finishing. But the decision should be tied to the specific finishing technology.

On a short 300-millimeter piece, it is convenient to check:

• how well the surface meets the finisher's requirements;
• how much additional preparation he plans;
• how the chosen primer and enamel system behaves;
• whether the detailing of the carved ornament is satisfactory after the finish.

After such a test, the main order should repeat the agreed specification. If the short piece was beech Prestige, but the long molding is suddenly ordered in oak Standard, the check ceases to be representative for the entire system.

"Under enamel" does not mean an already painted baguette.

The current card shows the quality of the "Under enamel" re-gluing.

This should be perceived as a characteristic of preparing the blank for opaque finishing, not as a finished color.

If the furniture is already painted, the task consists of several separate decisions:

1. choose profile K-070;
2. choose beech or oak;
3. choose Standard or Prestige;
4. agree on the finish system;
5. confirm the color against a real sample;
6. only then start the entire run of moldings.

For an existing cabinet, the short K-070 is convenient because it can be physically brought to the facade and compared after a test finish.

Line 4.6 m from K-070 22×13: how many two-meter elements to buy

For cross-section 22×13, the long trade item is 2000 mm.

Net line:

4.6 m = 4600 mm.

Minimal arithmetic:

4600 / 2000 = 2,3.

Round up:

3 pieces of 2000 mm.

Gross length:

3 × 2000 = 6000 mm.

Arithmetic reserve:

6000 − 4600 = 1400 mm.

This is not a guaranteed useful remainder. Part of the material may go to final trimming, pattern matching, and joint placement.

For Beech Standard:

3 × 5 570 = 16 710 ₽.

Beech Prestige:

3 × 8 580 = 25 740 ₽.

Oak Standard:

3 × 6 240 = 18 720 ₽.

Oak Prestige:

3 × 8 810 = 26 430 ₽.

Packaging, delivery, and installation are calculated separately.

Line 4.6 m from K-070 38×22: 1000 mm allows reducing the gross remainder

The 38×22 section has not only 2000 but also 1000 mm.

For 4.6 m, two schemes can be compared.

Three two-meter elements

Gross length:

6000 mm.

Reserve:

1400 mm.

Beech Standard:

3 × 6 610 = 19 830 ₽.

Two of 2000 mm + one of 1000 mm

Gross length:

2000 + 2000 + 1000 = 5000 mm.

Reserve:

5000 − 4600 = 400 mm.

Beech Standard:

2 × 6 610 + 3 310 = 16 530 ₽.

Cost difference at current price:

19 830 − 16 530 = 3 300 ₽.

The second scheme looks more economical and gives less gross waste. But it is only suitable if the cutting and joining map really allows using exactly these lengths.

If the designer wants to shift the joints to other zones or the pattern requires a different fit, pure arithmetic ceases to be a sufficient argument.

Why the total footage sometimes lies: three separate lines of 1.2 m each

Imagine three identical cabinets, each requiring a solid top frieze of 1200 mm length without a joint.

Total length:

1.2 + 1.2 + 1.2 = 3.6 m.

If we only count the sum:

3.6 / 2 = 1.8, so it seems that two two-meter elements are enough.

But from one 2000 mm element, you cannot cut two whole 1200 mm segments:

1200 + 1200 = 2400 mm.

Therefore, for three independent lines without joints, a minimum of three two-meter products is required.

That is why before you Buy wooden trim, you need to calculate not only the total length, but also the list of finished parts.

When to choose K-070 1000 mm, and when 2000 mm

The 1000 mm length is available only for 38×22.

It is convenient if a short local part is required, or if the cutting layout of a long project naturally ends with a section less than a meter.

For a long continuous frieze, a two-meter element usually reduces the number of initial blanks and potential joints.

But "2000 is always more profitable" is also incorrect. In the example with a 4.6 m line, the combination 2000+2000+1000 is more economical than three two-meter elements at the current price and leaves a smaller gross remainder.

The correct choice of length appears after layout, not before it.

What to do with the 300-mm K-070 after approval of the main batch

If a short element was bought for testing, it does not have to become waste.

It can be used in the project if there is an independent section of suitable length and the ornamental logic allows it. For example, a local furniture insert or a separate decorative zone.

But there is no need to invent a use just to 'recoup' the cost of testing.

If 300 mm does not fit into the final composition, its value was already elsewhere: it helped avoid mistakes with the cross-section, material, and finish of the main order.

For a long line, 300 mm cannot be automatically subtracted from the total footage. First, the short piece must actually be present in the cutting map.

Wooden molding and accent decor: how not to overload K-070

K-070 has a rich pattern. If it becomes the main linear ornament of the cabinet, adjacent decorative elements should be added sparingly.

Useful order:

first K-070 → then the cabinet architecture → then only the necessary accent decor.

If a calmer linear element is needed, you can Buy wooden molding in the general molding section.

If the composition lacks local accents, you can buy decorative overlays for furniture, but they should support K-070, not compete with it for attention.

How much does it cost to check both K-070 profiles before purchasing the main batch

If the main question of the project is exactly the scale of 22×13 vs. 38×22 mm, you don't have to guess from the picture or order several two-meter strips at once. Both profiles have a short version of 300 mm.

For Beech Standard:

830 + 990 = 1 820 ₽.

For beech Prestige:

1 290 + 1 670 = 2 960 ₽.

For oak Standard:

940 + 1 220 = 2 160 ₽.

For oak Prestige:

1 320 + 1 770 = 3 090 ₽.

Two short items for comparison	Cost
Beech Standard	1 820 ₽
Beech Prestige	2 960 ₽
Oak Standard	2 160 ₽
Oak Prestige	3 090 ₽

This is not a mandatory purchase or a recommendation to always take two short products at once. This option is justified when visualization does not allow confidently choosing a profile, and the cost of an error in the main batch is much higher than the cost of a physical check.

For example, three two-meter K-070 38×22 in Standard beech cost 19,830 ₽. If it's unclear before such an order whether the profile might be too large, 990 ₽ for a short version can be a rational price for testing. But if the designer has already worked with the real K-070 and the dimensions are approved on site, an additional 300-millimeter purchase is not needed.

Delivery also needs to be considered: if the short K-070 and the main batch are placed as two separate orders, logistics and packaging should be calculated according to the terms of each order, not just based on the price of the product itself.

What exactly can be carried over from the 300 mm to the future batch, and what needs to be re-checked

After physically trying out the short item, you cannot mechanically consider the entire project as verified.

From the 300-millimeter K-070, you can confidently carry over the decision on the cross-section scale: 22×13 or 38×22. You can also confirm the chosen wood species, sanding level, and finishing principle, if the check was performed on the same configuration that is planned for further ordering.

For the main batch, the following are re-checked:

• the full length of each decorative line;
• the number of two-meter and, for 38×22, one-meter items;
• joint locations;
• the cutting layout for individual cabinets and portals;
• the actual cost of the batch;
• packaging and delivery;
• compliance of the entire batch with the approved finish.

It is especially important not to conclude that "300 mm looks beautiful — so 4.6 m will automatically be beautiful." On a long line, a new scale appears: the repetition of the ornament, the joints, and the ratio of the frieze to the entire cabinet wall.

Therefore, a short sample answers the question "is K-070 of this cross-section right for me," while a cutting map answers "how to assemble a specific interior from this K-070." These two checks complement each other but do not replace one another.

When it is better not to buy K-070

K-070 should be avoided if, after a real 300-millimeter sample, the ornament turns out to be too active for the furniture.

Do not buy the entire footage if the designer has not yet chosen between 22×13 and 38×22.

Do not order a two-meter batch based only on the total number of meters without a cutting map of finished parts.

Do not choose 38×22 just because the cabinet is large.

Do not consider 300 mm a guarantee that the entire long line will look the same: the rhythm and joints need to be designed separately.

And you shouldn't buy K-070 for a transparent finish without agreeing on the material and future finish, if the initial check was done for an opaque enamel.

Mistakes when ordering carved baguette K-070

Mistake: evaluating the profile only from a large photo. Consequence — the real scale turns out to be unexpected. Solution — physical check of 300 mm or an accurate full-size mockup.

Mistake: considering 22×13 and 38×22 almost the same. Consequence — the larger profile overloads the furniture. Solution — compare both cross-sections on one layout.

Mistake: calling 300 mm a "sample". It is an independent product item. Solution — use it as a short piece for real testing.

Mistake: counting only the total footage. Consequence — there aren't enough solid pieces for individual lines. Solution — create a cutting map.

Mistake: forgetting that 1000 mm is only available for 38×22. Consequence — a non-existent combination 22×13×1000 appears in the estimate. Solution — cross-check the size table.

Mistake: considering "For enamel" as a ready-made coating. Solution — plan the finish separately.

Final specification for the main order

Suppose, after checking, the cross-section 38×22 mm, Standard beech, is approved, and for the 4.6 m line the scheme 2000+2000+1000 is suitable.

The request may look like this:

K-070 / 38×22×2000 mm / beech / Standard / For enamel / 2 pcs.
K-070 / 38×22×1000 mm / beech / Standard / For enamel / 1 pc.
Application — decorative frieze of the cabinet with a total finished length of 4600 mm.
The cutting map and joint locations are approved.
Confirm packaging, production time, and delivery.

If 22×13 is selected, the 1000 mm position is not available in the current grid, so the specification is based on 2000 mm.

Before placing the main order, you can Buy wooden picture frame molding through the category or go directly to the K-070 product page.

Questions before purchasing K-070

Can I order K-070 with a length of 300 mm?

Yes. The product card includes 300 mm options for cross-sections 22×13 and 38×22 mm.

Is 300 mm a special sample?

No. It is a standalone product variant of K-070.

Is there a K-070 with a length of 2000 mm?

Yes, for both cross-sections 22×13 and 38×22 mm.

Is there a K-070 22×13×1000 mm?

There is no such option in the current table. 1000 mm is available for 38×22.

What should I choose — 22×13 or 38×22?

First, compare the scale on specific furniture. 22×13 is more delicate, while 38×22 is noticeably larger and deeper.

Can I buy K-070 in oak?

Yes, oak is available in the size range along with beech.

What do Standard and Prestige mean?

These are sanding quality options, not finish colors.

What does "under enamel" mean?

Preparation of the workpiece for opaque finishing, not already applied enamel.

How many K-070 22×13×2000 are needed for 4.6 m?

At least three pieces before considering the specific cutting and joining pattern.

How many K-070 38×22 are needed for 4.6 m?

One of the economical options by length is two 2000 mm elements and one 1000 mm, if such a joining layout fits the project.

Why can't you just calculate the total length?

Because several separate solid sections may require more initial planks than dividing the total length shows.

Should I buy 300 mm first?

Yes, if the scale, species, or finish still raise doubts. If everything is already approved, this step can be skipped.

Can the short K-070 be used later in the project?

Yes, if the cutting plan provides a suitable independent section. No need to invent a use just to save money.

Where to buy K-070?

In the K-070 wooden baguette card or through the STAVROS carved wooden molding category.