Carved wooden table base to buy: dining STL-020-1 or coffee STL-027 — which to choose

A carved wooden base can be purchased for a full dining table or for a compact area next to an armchair, but these tasks cannot be solved with the same frame. STL-020-1, measuring 1100 × 1100 × 750 mm, is designed for a dining table for four people and works as a central piece in the dining room. STL-027, measuring 690 × 720 × 620 mm, is intended for a coffee, side, or small round table.

Both models are made of beech or oak, have a "Prestige" quality sanding, and belong to the French classic style. Beech is prepared for enamel, oak for tinting. However, the similarity ends with the material and carved design: STL-020-1 is delivered disassembled and assembled using dowels and eight reinforced Spiral Lock ties, while STL-027 arrives already assembled, as its parts are connected with a tongue-and-groove joint and additionally glued.

The difference in purpose determines everything else: the shape of the tabletop, the area of the room, the distance to chairs or upholstered furniture, the method of delivery, and subsequent assembly. For STL-020-1, a square tabletop ST-020-1 measuring 1128 × 1128 × 30 mm is recommended. For STL-027, a round ST-027 with a diameter of 660 mm and a thickness of 30 mm.

Below is an analysis of which base is suitable for a family dining room, spacious kitchen, living room, study, bedroom, hotel lounge area, or small salon. Special attention is paid to tabletop compatibility, choice of beech or oak, logistics, assembly, heavy materials, ordering mistakes, and the commercial route at STAVROS.

Buy dining table base STL-020-1 Buy coffee table base STL-027 Buy tabletop ST-020-1 buy tabletop ST-027

Go to Catalog

Comparison of sizes, materials, and configuration

What is a carved underframe and why it is chosen separately

The underframe sets the height, shape, stability, and character of the future table. The tabletop is responsible for the work surface, while the frame determines the seating, proportions, and how the piece relates to the room's style.

A ready-made carved base frees the buyer from making cabriole legs, complex stretchers, and joints from scratch. All that remains is to choose a compatible tabletop, finish, and properly assemble the set.

STL-020-1 and STL-027 cannot be compared solely by carving. They have different everyday functions, sizes, and logistics.

If the task is not yet defined, it is useful select a table base for the table in the general category and then return to comparing the two models.

Our factory also produces:

View Full Product Catalog

The main difference is the table's purpose

STL-020-1 is designed for dining seating. The height of 750 mm and square base of 1100 × 1100 mm require space not only for the table itself but also for four chairs and walkways.

STL-027 has a height of 620 mm and a compact base of 690 × 720 mm. It is designed for a table next to an armchair, sofa, or in a local tea area.

Attempting to use STL-027 as a regular dining table will result in improper seating and insufficient surface area.

STL-020-1, on the other hand, will be excessive for a small area next to an armchair.

When to buy STL-020-1

The model is suitable for a separate dining room, spacious kitchen, and living room where the table becomes the central piece.

Four seats require sufficient space around the tabletop and the ability to pull out chairs.

Knockdown delivery is convenient for navigating complex routes, but careful assembly is needed after delivery.

For such a scenario, you can buy STL-020-1 table base made of beech or oak and choose a compatible tabletop.

When to buy STL-027

STL-027 is suitable for a small living room, study, bedroom, hotel lobby, salon, and lounge area.

A round tabletop with a diameter of 660 mm forms a compact surface for drinks, a book, a lamp, or a decorative composition.

The frame is delivered assembled, so it does not require assembly after delivery.

If you need a local classic table, you can Buy the base STL-027 and check the delivery route in advance.

STL-020-1 or STL-027: comparison based on real scenarios

STL-020-1 as a dining base for four persons

The size of 1100 × 1100 mm defines a large square base around which a full dining area is formed.

Four cabriole legs distribute the visual weight to the corners and leave the center free for seating.

It is important for the buyer to evaluate not only the frame itself, but also the tabletop 1128 × 1128 mm, the chairs, and the movement around them.

Such a table requires a separate space and should not end up in the passage between the kitchen and the living room.

STL-027 as a coffee and side table base

The height of 620 mm and compact size are suitable for a local table next to upholstered furniture.

The round shape of the tabletop reduces the number of sharp corners in the movement area.

The table can stand next to an armchair, by the sofa, in the study, or in the bedroom.

Before ordering, you need to check whether the height will be too large or too small relative to the specific upholstered furniture.

Why heights of 750 and 620 mm cannot be mixed

A height of 750 mm corresponds to the task of a dining table, where a person sits on a chair and uses the surface for eating and working.

A height of 620 mm is designed for a different scenario — next to a sofa, armchair, or in a tea area.

If you place STL-027 in the dining room, the seating will be uncomfortable even with a beautiful tabletop.

If you place STL-020-1 next to a low sofa, the table will be too tall and bulky.

How to check the space for STL-020-1

On the floor, mark a square of the underframe 1100 × 1100 mm and the tabletop outline 1128 × 1128 mm.

Then arrange four chairs or their paper templates.

After that, check if you can pull out the chair and walk behind the seated person.

Only such a layout shows whether the table fits the room.

How to check the space for STL-027

On the floor, mark a base of 690 × 720 mm and a circle with a diameter of 660 mm.

Place the table at the intended point between the armchair, sofa, bed, or wall.

Make sure the passage remains clear and the tabletop is accessible without an awkward lean.

Also check the assembled frame dimensions against doors and stairs.

Square or round composition

STL-020-1 builds the interior around a square tabletop and four seats.

STL-027 creates a softer round composition, convenient for a local lounge area.

A square better aligns with the straight geometry of a dining room, while a round softens a sofa or armchair group.

Choose the shape simultaneously with the layout, not after purchasing the table base.

How the table base affects walkways

The cantilevered legs protrude in plan and require real testing, not just measuring the tabletop.

For STL-020-1, the surrounding space must account for chairs and the legs of seated people.

For STL-027, it's important not to hit the legs when walking past the sofa.

A full-size outline on the floor helps see the risk before ordering.

How to choose for a spacious kitchen

STL-020-1 is suitable for a kitchen where the table can stand separately and not interfere with the work path.

A square tabletop is convenient for four people and creates a center of the room.

STL-027 can be used additionally in an armchair area or by the window, but not instead of a dining table.

Dimensions are checked after arranging kitchen modules and chairs.

How to choose for a separate dining room

STL-020-1 reveals itself especially well in a room where the table becomes the main piece.

The carved legs are visible from all sides and support French classic style.

STL-027 in such a room can serve as an additional coffee table, but does not replace the main seating.

The under-table trim is linked to the sideboard, chairs, and doors.

How to choose for a small living room

STL-027 is often more suitable due to its compact base and round tabletop.

STL-020-1 will require significant space and may block the passage.

If the living room is combined with a dining room, the dining model is placed in a separate zone.

Before ordering, it is important to see both zones on the plan, rather than trying to place a large table after renovation is complete.

How to choose for the study

STL-027 fits near an armchair, library, or sofa and creates a local surface for a book or drink.

STL-020-1 can be used in a formal office as a standalone table, but its purpose remains dining according to the confirmed card.

Oak finish supports wooden furniture and panels.

The size of the table is checked relative to the armchair and free passage.

How to choose for a bedroom

STL-027 can be placed next to an armchair, by the window, or in a small tea area.

Height 620 mm requires checking next to the bed and nightstand.

STL-020-1 is usually too large for a bedroom unless the room includes a separate living room area.

The beech version under enamel helps match the table with painted furniture.

How to choose for a hotel lobby

STL-027 is suitable for an armchair group, lounge area, and a small waiting area.

The assembled frame is convenient to use as a ready-made base after checking for delivery access.

STL-020-1 is appropriate for a separate dining room or restaurant area of a hotel.

The material and finish are coordinated with the rest of the furniture before ordering the entire batch.

How to choose for a restaurant

STL-020-1 is suitable for a separate classic table for four persons.

The collapsible delivery makes it easier to bring into rooms with complex openings.

STL-027 can be used in a bar, tea, or lounge area.

For a commercial project, you need to check the tabletop joint, frequency of use, and installation in advance.

How to choose for a salon or boutique

STL-027 creates a compact surface near an armchair, fitting room, or consultation area.

The round tabletop does not overload the passage and showcases the carved base well.

STL-020-1 is only suitable for a spacious hall that needs a full central table.

The furniture outline is marked on the plan before ordering.

How to choose for a country house

STL-020-1 is suitable for a separate dining room, spacious kitchen, and formal living room.

STL-027 is suitable for a library, bedroom, fireplace area, and armchair zone.

Both models can be linked by the same wood species and coordinated finish.

When using two tables, it is important not to mechanically copy the color, but to check it on samples.

STL-020-1 and French Baroque

A large square base, S-shaped cabriole legs, and carved plasticity form a formal character.

The table requires space so that the legs are visible and not hidden by tightly placed furniture.

A room that is too small will deprive the model of its strong point and make seating difficult.

This frame opens up as a central piece, not as a random support for any tabletop.

STL-027 and the Louis XV style

The double curve of the legs and the C-shaped lower stretchers create a light but expressive silhouette.

The round tabletop supports smooth lines and allows the frame to be viewed from all sides.

The table is especially suitable next to an armchair, sofa, and in an intimate area.

In a modern interior, it can be used as the only classic accent after checking the color and scale.

Can the models be used in a modern interior

Yes, if the carved base becomes a deliberate contrast, not a random historical detail.

A beech underframe for a solid-color enamel can be linked to modern walls and minimalist furniture.

Oak tinting makes the item warmer and emphasizes its traditional character more strongly.

It is especially important not to overload the room with additional carving.

Beech under white enamel

The beech on both models is prepared for enamel coating.

White color makes the carving lighter and helps connect the table with doors, panels, and painted furniture.

On STL-020-1, the white finish creates a formal dining center.

On STL-027, it makes the compact coffee table more airy.

Beech under colored or black enamel

Colored enamel can connect the underframe with accent furniture or wall panels.

Black finish enhances the silhouette of cabriole legs and makes the relief more graphic.

On the large STL-020-1, the dark color increases visual mass.

On the compact STL-027, it can create a strong local accent.

Oak under tinting

Oak is chosen when it is important to preserve the wood grain pattern.

On STL-020-1, the texture supports the scale of the dining table and large legs.

On STL-027, the natural pattern is clearly visible on curves and decorative moldings.

The shade is checked on a sample next to the tabletop and other furniture.

Beech or oak for a classic table

Beech is suitable for opaque enamel and a project with a precise color.

Oak is chosen for semi-transparent tinting and visible wood texture.

Both species are confirmed for two models.

The decision is made simultaneously for the underframe and tabletop so that the set does not look random.

How to preserve carving when painting

A thick layer of enamel can smooth out small transitions and indentations.

A test coat is applied to a sample or an inconspicuous area.

On STL-020-1, uniform finishing of all four legs after assembly is especially important.

On STL-027, the inner areas of the C-shaped ties need to be carefully processed.

How to coordinate the color of the underframe and countertop

The set can be monochromatic or built on a deliberate contrast.

A beech base under enamel is conveniently paired with a painted tabletop.

An oak underframe requires checking the pattern and shade of the tabletop surface.

Before processing the entire set, it is useful to approve one common sample.

Why it's better to choose the tabletop together with the underframe

A compatible tabletop helps preserve the shape, overhang, and overall proportion.

An arbitrary size may overlap the carved legs or create a too small work surface.

Heavy material requires separate verification of the attachment point and load.

Buying as a set reduces the risk of accidental mismatch.

Tabletop ST-020-1

The recommended size is 1128 × 1128 × 30 mm.

The square shape matches the large base STL-020-1.

The tabletop is designed for a dining scenario for four persons.

Before ordering, you can Buy tabletop ST-020-1 and check the available material and finish in the card.

Tabletop ST-027

The recommended tabletop has a diameter of 660 mm and a thickness of 30 mm.

The round shape supports the rounded composition of the underframe and the local scenario.

The size is suitable for a coffee, side, or tea table.

For a ready-made set, you can buy a round tabletop ST-027 and check the current version.

Why you cannot choose an arbitrary tabletop just for its appearance

Size and shape affect overhang, stability, and access to the legs.

A tabletop that is too large can visually overwhelm the frame.

One that is too small will expose elements that should work as a single base.

Any deviation from the recommended model requires a drawing and verification of the attachment.

ST-020-1 or ST-027: which tabletop to buy

Can a round tabletop be placed on STL-020-1

Technically, an arbitrary shape cannot be recommended without a drawing and checking the support area.

The card offers a compatible square ST-020-1, so it is the safe starting point.

A round tabletop will change the overhang, the position of the edge relative to the legs, and the overall character of the table.

If the project requires a different shape, the joint is agreed upon before ordering.

Can a square tabletop be placed on STL-027?

For STL-027, a round ST-027 with a diameter of 660 mm is recommended.

A square shape may protrude with corners beyond the compact rounded base and change stability.

You cannot choose the size based only on the surface area.

A non-standard option requires a drawing, calculation, and verification of the attachment method.

How to check the tabletop overhang

The overhang is assessed along the entire perimeter, not just on one side.

It must maintain access to the carved legs and not create excessive leverage.

Recommended countertops provide the initial proportion for each model.

Any increase or decrease must be checked on a full-size mockup.

How to check the mounting method

The mounting depends on the countertop material, underframe design, and project node.

The MDF layout cannot be transferred to stone or glass without verification.

Before finishing, the fixation points and access to them must be determined.

After installation, the countertop must not block the ability to inspect connections.

Heavy countertop on STL-020-1

The card allows the use of heavy countertops, but this does not replace checking the full assembly.

You need to know the material, weight, size, center of gravity location, and mounting method.

It is especially important to check the ties, frame geometry, and support area.

Without this data, a universal permissible load cannot be guaranteed.

Stone countertop

Stone significantly changes the weight of the set and the fastening requirements.

For STL-020-1, this option is only possible after a design review.

For STL-027, heavy stone cannot be recommended by analogy, as there is no confirmed characteristic.

The buyer must agree on the countertop material before ordering the frame.

How to check stability before ordering

First, use the recommended shape and size of the countertop.

Then check the floor levelness, leg position, and absence of excessive overhang.

For non-standard material, evaluate the entire assembly, not just the beauty of the underframe.

Exact loads and fastening are clarified with a specialist or manager of STAVROS.

How to check the finished table after assembly

The table is installed on a level floor and all four support points are checked.

STL-020-1 connections must be assembled and tightened without distortion.

For STL-027, inspect the finished tongue-and-groove and glue frame for damage after delivery.

The tabletop is installed only after checking the geometry of the base.

Disassembled STL-020-1: advantage for delivery

The frame can be brought in parts through doors, stairs, and turns.

This is especially useful for country houses, old buildings, and premises without a large freight elevator.

Knockdown delivery reduces the size of one unit but requires careful unpacking and assembly.

Before delivery, prepare a clean place where parts will not be damaged.

How STL-020-1 is assembled

Confirmed connections — dowels and eight reinforced Spiral Lock ties.

Assembly is performed in correct geometry, without randomly tightening elements at one corner.

Before final tightening, check the diagonals and leg positions.

The tabletop is not used as a way to correct a skewed frame.

Why eight Spiral Lock ties are important

The ties are part of the confirmed assembly scheme for a large underframe.

They help connect elements of a collapsible structure and maintain the ability for controlled installation.

They cannot be replaced with random fasteners without verification.

The completeness and condition of parts are checked upon receipt.

Dowels in assembly STL-020-1

Dowels help position the elements being joined.

They must fit into the designated seats without skewing.

Excessive force can damage the wood or alter the geometry.

Assembly is performed on a protected, level surface.

Assembled STL-027: what this changes

The buyer does not need to connect the legs and tie rods after delivery.

The tongue-and-groove and gluing form a finished frame.

The main task is to safely bring the product in and not damage the protruding carved parts.

Before ordering, check the dimensions 690 × 720 × 620 mm against the route.

How to enter STL-027

Measure doorways, elevator, staircases, and turns.

Dimensions are checked considering packaging, if its parameters are available in the card or from the manager.

The frame cannot be pushed with support on carved legs and rods.

The route is cleared before delivery.

How to transport a carved under-table

Protruding legs and decorative rods are protected from impacts and friction.

STL-020-1 is transported element-wise in confirmed packaging, without mixing parts and fasteners.

STL-027 is secured as an assembled structure, without placing heavy objects on top.

After transportation, the product is inspected before installing the tabletop.

How to store before finishing

Keep parts in a dry room on a flat surface.

Mark disassembled STL-020-1 elements and do not lose the set of ties.

Protect assembled STL-027 from warping and point loads.

Do not leave untreated wood near sources of moisture and heat.

How to inspect STL-020-1 upon receipt

Check the article number, size, material, sanding quality, and set of connectors.

Check four legs, frame elements, dowels, and eight ties.

Resolve issues before painting and assembly.

Order the tabletop after confirming a compatible set.

How to accept STL-027 upon receipt

Check the dimensions 690 × 720 × 620 mm, material, and grinding quality.

Inspect the four legs, C-shaped braces, and finished joints.

Place the frame on a flat surface and check for damage after transport.

Only after acceptance proceed to finishing and the tabletop.

How to avoid confusing assembled and disassembled frames

STL-020-1 requires assembly after delivery.

STL-027 is delivered assembled.

The error affects logistics, room preparation, and installation timelines.

In the product card, check not only the size but also the delivery format.

How not to confuse coffee and dining height

Height 620 mm does not replace the standard dining scenario.

Height 750 mm is not suitable for a low sofa group without separate verification.

The model name is confirmed by its purpose, not just its style.

The choice starts with how the table will be used every day.

How to choose a table for a specific sofa

The height of STL-027 is compared with the seat, armrest, and habitual hand position.

The table should not force the user to constantly reach up or bend too low.

A circle with a diameter of 660 mm is marked on the floor next to the upholstered furniture.

After this, check the passage and the ability to use the table from different sides.

How to choose a table for a specific chair

STL-027 works especially well next to a single chair.

You need to check which side the user most often places a cup, book, or lamp.

The frame should not interfere with legs or chair movement.

If the space is too narrow, choose a different table base format from the category.

How to choose a table for a tea area

STL-027 is suitable for two chairs or a small sofa in a local area.

A round tabletop helps organize a shared surface without sharp corners.

The height of 620 mm is checked relative to the seats.

The table base should remain visible and not be cramped by furniture.

How to choose a table for four chairs

STL-020-1 is designed for four people and a square arrangement.

Chairs are placed along one side of each edge of the tabletop.

Cabriole legs should not conflict with the position of the legs.

A full-size mockup of the table and chairs helps check the seating.

How to choose chairs for STL-020-1

Chairs should match the dining height and style of the table.

Too wide models can block the aisle and bump into each other at the corners.

A carved frame pairs well with classic and transitional chairs.

Color and finish are coordinated with the underframe before ordering the set.

How to choose a table for a kitchen-living room

STL-020-1 is placed in the dining area, separating it from the sofa group.

STL-027 can appear near the sofa as a second, independent piece.

Using two models in one room is possible if the scale and finish are related.

Do not place them next to each other so that they compete for the center of the room.

How to choose for a formal living room

STL-020-1 suits a large central table, especially if the room supports French classic style.

STL-027 can be used in an armchair or fireplace area.

Oak tinting enhances the traditional character.

Beech enamel allows both pieces to be made lighter and more modern.

How to choose for a small apartment

STL-027 is more suitable for limited space.

STL-020-1 requires a separate zone and clear walkways around four chairs.

If the dining function is mandatory, first draw the room plan and check the 1128 mm square.

Buying from a photo without a layout creates a risk that the table will be too large.

How to choose for a new interior

The base, tabletop, chairs, and lighting are planned simultaneously.

STL-020-1 is associated with the center of the dining area and a pendant light.

STL-027 is placed next to specific upholstered furniture.

The material and finish are approved before painting all wooden elements.

How to choose for a finished interior Mistake: choosing only by thread

Both models look classic but perform different functions.

The beautiful silhouette of STL-027 does not make it a dining table.

Large STL-020-1 does not become a coffee table just by reducing the tabletop.

First determine the purpose, then the style and material.

Mistake: confusing heights of 620 and 750 mm

The 130 mm difference significantly changes the seating position.

STL-027 is designed for a local area next to upholstered furniture.

STL-020-1 is for chairs and a dining scenario.

The height is compared with real furniture, not just between cards.

Error: buying STL-027 for daily lunches

The coffee table is not designed for standard dining seating as intended.

The round tabletop with a diameter of 660 mm also has a different usage format.

For four people, choose STL-020-1.

If a smaller dining table is needed, look at other models in the category.

Error: placing STL-020-1 without space for chairs

The frame size does not equal the full area of the dining zone.

You need to account for the tabletop, chairs, and walkways.

A table placed in the center of the room may block movement after people are seated.

The layout is checked at real scale.

Error: ordering a custom countertop without a drawing

Shape and size affect overhang and mounting.

Recommended ST-020-1 and ST-027 are starting points.

Non-standard material requires node verification.

It is especially dangerous to carry a heavy countertop alone based solely on width matching.

Error: not accounting for assembled dimensions of STL-027

The frame is supplied ready-made.

If a door or staircase turn is already under the table, it will not be possible to bring it in without risk.

The route is measured in advance.

Package size, if necessary, is clarified in the product card or with a manager.

Error: losing STL-020-1 fastener

The collapsible model depends on a full set of dowels and eight tie rods.

Parts are unpacked on a clean surface and immediately checked.

Random replacement of fasteners is not allowed without verification.

The kit is stored together until assembly begins.

Error: mixing beech and oak without a plan

The wood species are intended for different visual finishing scenarios.

Beech for enamel and oak for tinting should not be accidentally combined in one table.

It is better to order the underframe and tabletop with a coordinated material.

Any contrast is made deliberately and checked with a sample.

Error: assigning permissible load without calculation

There is no universal numerical value in the scheme.

Even when allowing a heavy countertop for STL-020-1, the entire assembly must be checked.

Material, weight, overhang, and fastening change the load.

For STL-027, the characteristic of another model cannot be transferred.

Error: fastening stone without design verification

A stone countertop changes the weight and center of gravity.

Fasteners, support area, and geometry must be calculated.

One size match is not enough.

Before purchasing stone, the base and countertop must be approved as a single set.

Error: painting parts separately without a sample

Legs and rods must match in shade and gloss.

Disassembled STL-020-1 is convenient to paint in parts, but the color must be uniform.

Assembled STL-027 requires access to internal areas.

A test coat is done before finishing the entire product.

Error: not checking the floor before installation

Even a correctly assembled frame can wobble on an uneven base.

First, check the floor and all four support points.

You cannot compensate for misalignment by randomly tightening one tie.

The cause of instability is determined before installing the tabletop.

Error: placing a coffee table in the passage

Cabriole legs and a round tabletop take up more space than it seems along the central axis.

STL-027 should stay near the seating area, not on the main route.

The base outline 690 × 720 mm is marked on the floor.

If the passage becomes narrow, choose a different format.

Who is STL-020-1 suitable for

The model suits a family of four, a separate dining room, a spacious kitchen, and a formal living room.

It is needed by a buyer who is ready to allocate space for a table and chairs.

Knockdown delivery is useful for complex entry.

The underframe is not suitable for a small room without clear passages.

Who is STL-027 for

The model is suitable for the owner of a small living room, study, bedroom, or lounge area.

It is convenient next to an armchair and sofa when a full dining surface is not needed.

The assembled delivery eliminates the need to install the frame.

The underframe is not suitable for daily dining seating for four people.

When it's better to choose a different model

If you need a rectangular table for more people, STL-020-1 may not meet the task.

If a very low coffee table is required, the height of STL-027 may be too high.

If a round or square shape does not suit the layout, you should look at other frames.

In that case, you can compare dining and coffee table underframes in the category.

How to care for enameled beech

Care is determined by the chosen enamel and protective system.

Dust is removed with a soft cloth, without damaging the carved recesses.

Abrasives can alter the shine on protruding edges.

Before local repair, the color is tested on a sample.

How to care for tinted oak

The tint must be protected with a compatible finish.

Moisture is not left in joints and recesses.

Cabriole legs are cleaned without strong friction on protruding elements.

The repair compound is first tested on a spare sample.

How to protect legs during use

The table is not dragged across the floor.

When rearranging, lift it by structurally safe areas, not using carved protrusions as handles.

STL-020-1 is moved after assembly only considering the weight of the tabletop.

STL-027 is protected from impacts on the C-shaped rods.

How to check connections over time

For STL-020-1, accessible ties are inspected according to the maintenance plan and after transportation.

If play appears, first determine the cause and do not overtighten the fasteners.

STL-027 has adhesive joints that are not disassembled without professional necessity.

Any changes are assessed before noticeable misalignment occurs.

How to store disassembled STL-020-1

Each part is marked and protected from friction.

Nails and ties are stored in a signed set.

Legs are placed so that the thread does not bear the load.

Long-term storage is only allowed in a dry room with a level support.

How to store assembled STL-027

The frame is placed on a flat surface and not loaded with foreign objects on top.

Legs and rods are protected from impacts.

The product is not left in a narrow passage or near a source of moisture.

Before installing the tabletop, the geometry is rechecked.

How to choose a finish for a restaurant or hotel

You need to consider the color system of the interior and the frequency of maintenance.

Beech under enamel allows you to replicate a specified color.

Oak under tinting emphasizes the natural character.

The precise finish and operating conditions are agreed upon before serial ordering.

How to choose a finish for your home

White enamel lightens French classics and connects the table with doors and panels.

Dark enamel makes the silhouette more graphic.

Oak tinting supports the floor and natural furniture.

The sample is viewed in daylight and evening light.

How to use both models in one project

STL-020-1 can become a dining center, and STL-027 a table in the seating area.

The connection is created through material, shade, and overall style.

It is not necessary to paint both items identically, but the difference must be intentional.

Zone sizes are planned independently so that items do not compete.

How to buy STL-020-1 and STL-027 at STAVROS

First, determine the function: dining seating or a local coffee table.

Then check the room dimensions, material, finish, delivery format, and tabletop.

After that, open the card of the desired frame and compatible tabletop.

A broad request is better addressed through the catalog of carved solid wood underframes, and a specific choice through the STL-020-1 and STL-027 cards.

What to check before paying for STL-020-1

Check the size 1100 × 1100 × 750 mm, beech or oak, and "Prestige" quality.

Check the knockdown delivery, dowels, and eight Spiral Lock ties.

Calculate space for a tabletop 1128 × 1128 mm, four chairs, and walkways.

For a heavy tabletop, coordinate the entire assembly.

What to check before paying for STL-027

Check the size 690 × 720 × 620 mm, material, and sanding quality.

Ensure the assembled frame fits through the delivery route.

Check the round tabletop with a diameter of 660 mm and its position next to upholstered furniture.

Do not use the model as a replacement for a standard dining table.

Why ordering a ready-made set reduces risk

The compatible base and tabletop are already calculated in shape and scale.

The buyer does not select a random surface based solely on appearance.

The material and finish can be coordinated before processing.

Installation focuses on checking the joint, not on correcting mismatches.

What to buy with a table base

How to check the finished dining area with a mockup

Mark the tabletop square and the position of four legs on the floor.

Then place real chairs or their templates and simulate seating.

It is important to check the movement of a person with a plate, opening of adjacent doors, and distance to the kitchen.

Such a mockup shows whether the STL-020-1 really fits the room.

How to check the coffee area with a mockup

Mark a circle with a diameter of 660 mm next to the sofa or armchair.

Separately show the base 690 × 720 mm, because the legs may protrude differently than the tabletop.

The user sits down and checks access to the surface.

After that, they assess the clear passage around the table.

How to connect a table with a pendant light

The dining STL-020-1 often becomes the center under ceiling light.

The light fixture is positioned along the tabletop axis, not just the room's.

STL-027 usually does not require separate overhead light and works well with a floor lamp or sconce.

The electrical plan is approved after the final furniture arrangement.

How to connect a table with a rug

The rug under the dining area should account for the table and the position of pulled-out chairs.

Under STL-027, a small rug can unite a seating group.

Carved legs should not fall on the uneven edge of the covering.

Before buying a rug, check the full contour of the furniture.

How to choose the color of the tabletop relative to the underframe

The same color creates a solid classic piece.

A contrasting tabletop more strongly separates the work surface from the carved base.

Beech under enamel allows a more precise color match, oak under tinting preserves the wood grain.

The final combination is approved on two samples side by side.

How to check proportions before painting

The unpainted underframe is temporarily placed in the project location and a tabletop template is added.

So, check whether the surface overlaps the carved legs and whether the frame seems too bulky.

For STL-020-1, four sides are checked; for STL-027, a 360-degree view.

After approving the proportions, they move on to finishing.

How to organize a series order for a restaurant

First, one control table with the selected tabletop is assembled.

On it, they check fit, stability, finish, and maintenance.

After acceptance, they record the article numbers, material, color, and attachment point.

Only then do they order the remaining sets as one agreed batch.

How to organize a single order for home

Create a plan for the area and choose a model based on its purpose.

Open the underframe and tabletop cards, checking dimensions and material.

Check the delivery route and delivery format.

After that, coordinate the finish and installation.

How to avoid damaging threads during assembly

STL-020-1 parts are placed on a soft, clean surface.

The tool must not rest on carved edges.

Tightening is done without misalignment or excessive force.

After assembly, the frame is lifted by safe structural zones.

How to avoid damaging STL-027 during delivery

The assembled frame is moved with minimal control of all protruding parts.

Do not use C-shaped pulls as handles.

Turns are made slowly, having cleared the route in advance.

After skidding, check connections and supports.

How to check the completeness of the tabletop

Exact material and configuration options are verified in the card of the selected ST model.

Do not assume the presence of fasteners if this is not confirmed.

Before installation, compare the tabletop with the support area of the underframe.

All missing elements are determined before finishing begins.

When to contact a STAVROS manager

Consultation is especially useful for non-standard tabletops, heavy materials, and complex delivery.

It is also worth clarifying the current options for material, finish, and completeness.

For a commercial project, it is convenient to provide the room layout and the number of tables.

The more accurate the initial data, the more specifically compatibility can be checked.

How not to confuse an underframe with a finished table

STL cards describe frames only, not fully finished furniture with an automatically included tabletop.

The buyer needs to separately check whether the selected tabletop is included in the order and which elements are supplied with the underframe.

ST-020-1 and ST-027 are given as recommended compatible models, but their cards open separately.

Such control protects against a situation where the frame is delivered but the work surface has not yet been selected.

How not to confuse a coffee table and a cocktail table

In colloquial speech, these names are often mixed up, but the height and usage scenario should be checked against actual dimensions.

STL-027 has a height of 620 mm and is suitable for a coffee table, side table, or small round table.

If you need a very low table in front of the sofa, the model may turn out to be taller than expected.

The decision is made after comparing with the specific upholstered furniture.

How to check a table in the interior before purchasing

For STL-020-1, make a square of 1128 × 1128 mm from cardboard and place it at a temporary height close to the future surface.

For STL-027, use a circle with a diameter of 660 mm and check it next to an armchair or sofa.

Such a volumetric mock-up shows not only the occupied area, but also the convenience of access.

After checking, you can choose the model more accurately without relying on a photo without scale.

How to account for the weight of the tabletop when bringing it in

Even if the underframe is brought in separately, the finished tabletop also needs to be carried through doors, elevator, and stairs.

The ST-020-1 square is larger and requires a separate delivery route.

The Round ST-027 is more compact, but its edge also needs protection.

The logistics of the two parts of the kit are checked simultaneously.

How to prepare a place for assembling STL-020-1

A flat, protected area is needed where all parts can be laid out without the threads coming into contact with a hard floor.

Fasteners and dowels are laid out according to the kit before starting work.

Assembly is not performed in a narrow passage where it is impossible to check the diagonals.

After tightening, the frame is left accessible for inspection until the tabletop is installed.

How to prepare a place for STL-027

The assembled frame does not require installation, but a free point is needed for acceptance and finishing.

The product is placed on a flat floor and inspected from all sides.

Before the tabletop is installed, it is protected from accidental loads from above.

The route to the permanent location should not pass through narrow areas with a risk of impact.

How to choose one model for multiple rooms

For a restaurant, hotel, or large house, it is not necessary to use the same frame everywhere.

STL-020-1 is logically kept for the dining room, and STL-027 for the study, bedroom, and seating areas.

The connection is created through the wood species and finish, while preserving different purposes.

This way, the project looks cohesive, but does not force one size to solve incompatible tasks.

How to place an order without confusion

In the specification, the underframe, tabletop, material, finish, and quantity are recorded separately.

For STL-020-1, disassembled delivery and a set of connections are specified.

For STL-027, the assembled format and placement route are noted.

A clear checklist helps the STAVROS manager verify the order before payment and delivery.

How to choose a table for daily use

The daily scenario matters more than the decorative impression. STL-020-1 suits regular family meals if the space allows free use of four chairs.

STL-027 is convenient for drinks, a book, a laptop, or local serving near an armchair.

You cannot evaluate only the free space at the time of purchase: you need to imagine the movement of people, cleaning, and rearranging furniture.

Checking the everyday route helps choose a model that will actually be used.

How to choose a table for a rare formal zone

If the table is not used every day, the visual role and fit with the room's scale come to the forefront.

STL-020-1 can become the centerpiece of a formal dining room or a separate living room.

STL-027 is suitable for a tea room area, library, or hotel lobby.

Even rare use does not eliminate the need to check stability, clearances, and tabletop compatibility.

How to pair the table with other carved furniture

Cabriole legs pair well with classic armchairs, consoles, sideboards, and wall panels.

But repeating the carving should not turn the room into a set of equally active pieces.

STL-020-1 already has a strong silhouette and requires a calm environment.

STL-027 is easier to use as a single local accent next to more minimalist furniture.

Final check before adding to cart

Determine the table's purpose, note its full outline, and check the surrounding furniture.

Verify the material, finish, delivery format, and compatible tabletop.

For STL-020-1, prepare an assembly area and ensure the set of connections is complete.

For STL-027, measure the entire drift path of the assembled frame.

How to check the scale of the carving relative to the room

Large STL-020-1 is better perceived where there is free space around it and the legs are visible from several sides.

In a cramped room, a carved frame may look heavier than on the card.

STL-027 fits more easily into a chamber zone, but also requires a background so that decorative rods do not hide among the furniture.

A photo of the mockup from the main viewpoint helps compare the two models more fairly.

How to avoid inconsistency between the tabletop and the underframe

The shape, color, and material should look like part of the same object.

A too modern or overly massive tabletop can overwhelm the carved base.

The recommended ST-020-1 and ST-027 provide the initial proportion from which it is safer to start.

Any non-standard solution is first tested in the drawing and on samples.

What to save after purchase

Save the article numbers of the underframe and tabletop, material, color, assembly diagram, and fastening information.

For STL-020-1, separately store data on dowels and eight Spiral Lock ties.

For STL-027, record the assembled dimensions and the safe carrying method.

This information will be useful during transportation, repair, or reordering.

Before payment, it is useful to compare both models side by side on the same room plan once more, so that the final decision takes into account not only style, but also daily use, delivery, assembly, and the chosen tabletop.

FAQ: questions about STL-020-1 and STL-027

How is STL-020-1 different from STL-027?

STL-020-1 is a dining underframe 1100 × 1100 × 750 mm for four people. STL-027 is a coffee underframe 690 × 720 × 620 mm for a round table.

Which table base is suitable for a dining table?

STL-020-1 with the recommended square tabletop ST-020-1.

Which model is intended for a coffee table?

STL-027 with the round tabletop ST-027 with a diameter of 660 mm.

How many people can fit at STL-020-1?

The card positions the model as a dining table for four people.

Which tabletop should I buy for STL-020-1?

ST-020-1 with dimensions of 1128 × 1128 × 30 mm is recommended.

Which tabletop is suitable for STL-027?

The round ST-027 with a diameter of 660 mm and a thickness of 30 mm is recommended.

Can a round tabletop be installed on STL-020-1?

Only after a separate check of the shape, overhang, support area, and fastening. The basic option is the square ST-020-1.

Can STL-027 be used as a dining table?

No, by design it is a coffee or side table with a height of 620 mm.

What height will the table be with ST-020-1?

The base has a height of 750 mm, the tabletop has a thickness of 30 mm. The exact final height needs to be verified against the actual installation assembly.

What height will the table be with ST-027?

The base has a height of 620 mm, the tabletop has a thickness of 30 mm. The result depends on the method of installing the tabletop.

What to choose for white enamel — beech or oak?

Beech, since it is confirmed as an option for enamel coating.

How to preserve the texture of the oak base?

Select oak for tinting and check the finish on a sample.

Which model is delivered assembled?

STL-027.

How is STL-020-1 assembled?

Using dowels and eight reinforced Spiral Lock ties.

Does STL-027 need to be assembled?

No, the frame is delivered assembled; parts are connected with a tongue-and-groove joint and glued.

Can a heavy stone countertop be used?

For STL-020-1, the card allows heavy countertops, but the full assembly must be checked. For STL-027, this feature is not confirmed.

How to check stability before ordering?

Use the recommended countertop size, check the layout, support area, fastening, and floor levelness.

What clearance should be left around the dining table?

A universal number is not set without a plan. You need to arrange the table, chairs, and people's movement in the actual room.

How to check if STL-027 will fit next to the sofa?

Mark the base 690 × 720 mm on the floor and the tabletop circle 660 mm, then check access and passage.

What to choose for a small apartment?

More often STL-027. STL-020-1 is only suitable if there is a separate dining area.

Can both models be ordered in the same color?

Yes, after agreeing on the material and a trial sample of the finish.

Do I need to buy the base and tabletop together?

This reduces the risk of errors in shape, size, and finish, although the current configuration should be checked in the product cards.

Where to buy STL-020-1 and STL-027?

In the corresponding product cards on the STAVROS website.

What should be checked before ordering?

Purpose, size, material, finish, tabletop, mounting method, delivery format, and delivery route.

Result: dining STL-020-1 or coffee STL-027

STL-020-1 is chosen for a full dining table for four people. The size of 1100 × 1100 × 750 mm and the recommended tabletop ST-020-1 measuring 1128 × 1128 × 30 mm require a separate area, chairs, and clear walkways. Disassembled delivery simplifies bringing it in, and dowels plus eight Spiral Lock ties form the intended assembly system.

STL-027 is chosen for a coffee, side, or small round table. The size of 690 × 720 × 620 mm and the ST-027 tabletop with a diameter of 660 mm suit an armchair group, sofa, bedroom, study, and lounge area. The frame is delivered assembled, so before ordering it is especially important to check doorways, stairs, and the delivery route.

Both models are available in beech under enamel and oak under tinting with "Prestige" sanding quality. The underframe and tabletop are best chosen as a single set, simultaneously coordinating the material, color, and mounting. For a heavy or non-standard surface, verification of the full assembly is required without arbitrary promises about load capacity.

On the STAVROS website, you can open the cards for STL-020-1, STL-027, ST-020-1, and ST-027 or go to the furniture frames category. An informed choice based on purpose, size, delivery, and tabletop helps you get a convenient table, not a beautiful base that does not match the actual layout.