The dresser and two nightstands should look like a set: how to order 14 wooden handles Altair HL-067M of the same wood species

A dresser and two bedside tables can be made from the same material and painted the same color, yet still not be perceived as a set. The reason is often in plain sight: the dresser has one type of handles, while the tables have similar but different ones—differing in wood species, grain, or metal tone. On a single piece, this difference seems minor. In a group of three pieces, it turns into a recurring visual glitch.
Let's look at a specific order. The dresser has six drawers, and each of the two nightstands has four. If one knob handle is installed on each drawer, the furniture requires 14 handles. The customer chose the Altair HL-067M, measuring 42 × 42 × 38 mm, with a stainless steel metal base. The product card offers zebrano, wenge, palisander, and walnut. At this stage, you can't simply add fourteen random Altair handles to the cart: first, you need to decide which wood type is used for the entire set, check the warehouse stock, assess the natural variability of the wood, order a sample handle or approve one item on a real facade, and determine whether a fifteenth spare part is needed.
The short practical answer is as follows. For a set of 14 handles, one material and one product configuration are chosen. As of August 26, 2026, the warehouse stock of zebrano and walnut was sufficient for both the fourteen working handles and one spare. There wasn't enough wenge and palisander in stock for such a purchase. However, the current stock is not a permanent characteristic: before payment, it needs to be checked again in the product card or confirmed with a manager. One wood type helps maintain the overall character of the set, but it doesn't make the natural grain of all wooden parts absolutely identical.

Go to Catalog

Altair HL-067M wooden furniture handle: what is confirmed by the product card

Altair HL-067M is a compact furniture handle with a wooden part and a metal base. The product size is 42 × 42 × 38 mm. The product card table lists four wood options and the metal finish "Stainless steel."

Parameter	Confirmed value	What to check before ordering
Model	Altair HL-067M	Whether one article number is specified for all three pieces of furniture
Size	42 × 42 × 38 mm	Is the handle proportional to each drawer and is there enough space for a grip
Wood	zebrano, wenge, rosewood, or walnut	Is one wood type chosen for the entire batch
Metal	Stainless steel	Does it match the legs, lamps, and other hardware
Quantity	Sold individually	Are all facades and reserve calculated correctly?
Additional hardware	The card shows FUR-032 and FUR-033	Which parts are actually needed and in what quantity

The 42 mm parameter describes the frontal dimension, and 38 mm describes the product volume along the third axis. You need to check not only whether a round handle fits on the facade. It is important whether it is comfortable to grip with fingers, whether it is too close to the adjacent edge, and whether it conflicts with another handle, countertop, or wall when opening.
Current options, prices, and stock are in the card, where you can buy the wooden furniture handle Altair HL-067M. It is the product page, not the price saved from the article, that should be used before payment.

Why a furniture set should be calculated by facades, not by items

The phrase "handles for a dresser and two nightstands" is not a specification. One dresser may have four wide drawers with two handles on each, another may have six drawers with one handle. A nightstand may have one drawer and a door, or four separate pull-out facades. Therefore, first make a list of opening elements.
In our scenario:

• dresser: 6 drawers × 1 handle = 6 handles;

• nightstand No. 1: 4 drawers × 1 handle = 4 handles;

• nightstand No. 2: 4 drawers × 1 handle = 4 handles;

• total for installation: 6 + 4 + 4 = 14 handles.

But even this calculation cannot be automatically applied to real furniture. If a wide heavy drawer was designed for two grip points, the decision about one central button must be confirmed by a furniture maker. A handle cannot be assigned to a load-bearing facade just because the number "one per drawer" is convenient for the estimate. Before purchasing, check the design of the drawer slide system, the width of the facade, the opening force, and the location of reinforcement for fasteners.
The correct order is as follows: the furniture maker confirms the number of handles on each facade, the designer fixes the axes, and the purchaser sums up the items. After that, the number 14 becomes a design figure, not an approximate one.

Our factory also produces:

View Full Product Catalog

How to turn the number 14 into a working facade list

Even if the arithmetic is obvious — 6 + 4 + 4 = 14 — it is useful not to limit yourself to the final sum. For furniture consisting of three pieces, it is better to create a list where each handle is tied to a specific facade.

Facade code	Item	Facade	Number of handles	Altair material	Note
C-01	Commode	Box 1	1	one selected wood species	center/axis per drawing
C-02	Commode	Box 2	1	Same species	By template
…	…	…	…	…	…
T1-01	Cabinet 1	Box 1	1	Same species	mirrored to nightstand 2
T2-01	Cabinet 2	Box 1	1	Same species	mirrored to nightstand 1

Such a table seems redundant until one of the handles turns out to be of a different wood species or one nightstand receives four pieces with a noticeably different grain.

Why paired nightstands should be considered as one group

Two nightstands usually stand symmetrically relative to the bed. A person perceives them not as separate items, but as a pair.

Therefore, it is logical to distribute the handles as follows:

1. first, form two groups of 4 handles that are as close as possible in overall tone;

2. assign one group to nightstand No. 1;

3. the second one — to drawer No. 2;

4. use the remaining 6 on the dresser with internal symmetry across the drawers.

This does not mean "matching an identical pattern." Natural wood does not have to repeat. The point is to avoid a random situation where one drawer is noticeably lighter than the second only due to batch distribution.

How to distribute six handles on a dresser

If the dresser has six identical drawers in one vertical column, it is useful to distribute the pieces from calmer to more expressive according to a pre-chosen logic.

If the drawers are arranged 3 × 2, you can use the mirror principle:

• C1 and C6 are close in overall tone;

• C2 and C5 are the next pair;

• C3 and C4 are the central pair.

This is no longer a product characteristic of Altair, but a way to manage the natural variability of the array.

Why random arrangement enhances differences

Imagine 14 walnut pens:

• 4 noticeably lighter;

• 6 medium;

• 4 darker.

If four light ones randomly end up on one cabinet, that cabinet will visually stand out from the set.

If you distribute them symmetrically across three items, the natural difference is perceived as material, not as a set error.

When arrangement is not needed

If the client consciously accepts natural variation and all pens look close enough overall, special sorting is not required.

You cannot turn natural wood into a requirement of '14 clones.' It is important to agree on expectations in advance.

Trial handle: how to test Altair HL‑067M before ordering the entire batch

For a set of 14–15 expensive handles, one physical Altair can be the most useful step before the main order.

It is better to test not only on one facade.

Minimum:

• the smallest drawer of the cabinet;

• the widest drawer of the dresser;

• a facade with minimal distance to the wall or adjacent part.

What one real sample checks

The size 42 × 42 mm can be drawn on paper. But paper does not show C = 38 mm.

The physical handle shows:

• how much it protrudes;

• how it is grasped with fingers;

• how visible the metal is from the side;

• whether it is too bulky on the nightstand;

• whether it gets lost on a wide dresser;

• whether it catches the adjacent facade;

• how the wood works under real lighting.

Why the trial handle should be considered part of the future set

If the sample fits, it does not become an "extra first purchase." It can be included in the final 14 or 15 pieces.

Then the scheme:

1 trial + 13 more = 14 working

or

1 trial + 14 more = 15 with reserve.

This is useful for the budget.

But the first handle must be of the same configuration

You cannot check an Altair made of walnut and then order 14 zebrano ones and assume the material is also confirmed.

The geometry will be the same, but:

• drawing;

• color;

• visual contrast;

• combination with the facade

will change.

If the material has not been chosen yet, the physical check should determine both the shape and the wood species.

What to do if the trial handle is comfortable on the nightstand but too small on the dresser

This is an important edge case.

You don't need to automatically put one Altair everywhere just for the sake of the word "set".

Possible solutions:

• two Altair handles on a wide drawer, if the facade design allows it;

• a different model for the dresser;

• a different type of handle on the entire furniture group.

But if the number of handles changes, the original calculation of 14 becomes irrelevant.

Therefore, the final number needs to be confirmed after testing a variety of facades.

Ordering 14 wooden handles or adding one spare

If 14 handles are installed on the furniture, formally it is enough to buy 14 pieces. The fifteenth is not needed for installation and increases the budget. Nevertheless, a spare part makes practical sense when the handle is made of natural material and the entire furniture must maintain a unified hardware program for many years.
A spare handle is useful in three situations.
The first is damage during installation. A marking error, a part falling on a hard floor, or incorrect fasteners can stop the assembly of the entire set. If a replacement is on site, work continues without a new order.
The second is a replacement due to wear after several years. The assortment, batch of wood, and available shade may change. Even if the same item remains in stock, a new part made of natural wood does not have to match the pattern of the old one.
The third option is the ability to choose fourteen of fifteen pieces that are most consistent in overall character. This does not mean that the seller automatically performs pattern matching. The service and sorting criteria must be agreed upon in advance. But an extra handle gives the customer more freedom when distributing across facades.
The fifteenth handle can be skipped if the budget is limited, one trial piece has already been tested, natural wood variations are accepted, and a possible future replacement does not have to be visually unnoticeable. A spare is a deliberate insurance, not a mandatory rule.

How to choose between 14, 15, and 16 handles without a mechanical "10% spare"

For 14 working positions, the percentage approach gives a strange result:

14 × 10% = 1.4 handles.

Buying 1.4 handles is impossible. Therefore, the reserve for piece hardware is calculated not by percentage, but by failure scenarios.

14 pieces — the exact installation minimum

Suitable if:

• the trial handle has already been tested;

• the installation timeline is not critical;

• in case of damage, you can wait for a reorder;

• Natural variability of wood is accepted;

• Future unnoticeable replacement is not required.

Plus — minimal product cost.

Minus — zero stock.

15 pieces — one universal spare

This is the most understandable insurance:

• one piece in case of damage;

• one extra for visual layout;

• one future replacement from the same purchase.

At the same time, the 15th handle does not have to stay in packaging forever. After receiving the batch, you can first distribute the 14 most consistent pieces, and keep the spare separately.

16 pieces — two spares only for a specific reason

Two spares can make sense if:

• the site is remote;

• repeat delivery is expensive;

• the furniture is commercial and must be repaired quickly;

• symmetrical future replacement of a paired nightstand is especially important;

• the material is rare and the current stock is sufficient.

But 16 should not become a new standard. For a home dresser and two nightstands, one spare usually already covers the main risk.

How much each reserve level costs

Based on prices from the check dated August 26, 2026:

Material	14 pcs.	15 pcs.	16 pcs.
Zebrano, 3,270 RUB.	45 780	49 050	52 320
Wenge, 3,230 RUB	45 220	48 450	51 680
Rosewood, 3,460 RUB	48 440	51 900	55 360
Walnut, 3,290 RUB	46 060	49 350	52 640

These amounts are product arithmetic as of the check date, excluding delivery and additional hardware.

The spare should be of the same wood species

If the entire set is walnut, a spare handle made of zebrano does not solve the problem.

It may be functionally compatible, but it violates the very scenario the article is written for: the three items should look like a set.

Where to store the spare handle

It is better to keep:

• in a dry room;

• in individual packaging;

• with the sticker “Altair HL‑067M / material / order date”;

• along with information about the furniture.

After a few years, it is easy to confuse the article number on memory with a similar model.

What to do if the required wood species is not in stock

As of the check date, a full set of 14/15 pieces could be assembled from zebrano and walnut. Wenge and rosewood were missing.

This creates not a “product unavailable” problem, but four possible strategies.

Strategy 1. Wait for the production of the missing quantity

The card indicates an average production time for custom orders of 5–10 business days.

But before payment, you need to confirm:

• whether it is possible to manufacture the exact selected wood species;

• how many pieces;

• what is the lead time for this specific batch;

• will warehouse and new parts be shipped together;

• is it possible to consolidate into one order.

Strategy 2. Order the entire batch for production

If the visual goal is particularly strict, it is sometimes more logical not to mix 7 warehouse wenge and 7 newly manufactured pieces, but to request the possibility of one full batch.

The article cannot promise that the manufacturer will do this. This is a question for the manager.

Strategy 3. Choose a material that is already available in full quantity

If the deadline is more important than the specific wood species, walnut or zebrano at the time of the check solved the task without waiting.

But switching from wenge to walnut only because of stock is worth doing after a second fitting with the facade.

Strategy 4. Split the delivery and accept the visual risk

Sometimes deadlines force you to install some handles earlier.

Then it's better to decide in advance:

• which items receive the first delivery;

• where a potential difference is acceptable;

• whether the second batch will be on the same furniture.

For example, it's more logical to fully equip two paired nightstands with one delivery than to put two old and two new handles on each.

The shortage should be calculated in pieces

For 14 working handles:

• zebrano: 17 − 14 = 3 pcs. remain in stock after a conditional order, if the balance hasn't changed;

• wenge: 7 − 14 = 7 pcs. are missing;

• rosewood: 2 − 14 = missing 12 pcs.;

• walnut: 53 − 14 = 39 pcs. remain.

For 15:

• zebrano: 2 remain;

• wenge: missing 8;

• rosewood: missing 13;

• walnut: 38 remain.

This helps the manager and the client speak concretely: not "there's not enough wenge," but "for the option with one spare, you need 8 more pieces."

Why the remaining 17 of zebrano is not a reason to delay payment

If the article is read later, the figure may already be different.

Therefore, all warehouse analytics should end with one phrase:

before payment, check the current stock of the specific wood species.

How to choose one Altair HL-067M wood species for all three items

Altair offers zebrano, wenge, rosewood, and walnut. The choice between them cannot be reduced to a 'better — worse' scale. They differ in overall color impression and grain pattern, so the decision is made next to a real cabinet door, not based on an isolated image of the handle.

Altair wooden handle in zebrano

Zebrano is chosen for its contrasting linear grain pattern. On fourteen repeating handles, such texture becomes a noticeable part of the composition. This suits calm, solid-color cabinet fronts where hardware should serve as an accent.
However, the expressive grain amplifies natural differences. Two handles of the same wood species may have different stripe direction and density. Therefore, the set should be laid out on a table before installation and distributed across the furniture so that the most similar pieces are placed on paired nightstands, while more active ones go on the central dresser or follow another pre-selected logic.

Altair wooden handle in wenge

Wenge gives a dark, graphic impression. Such a handle can support dark legs, frames, lighting fixtures, or contrast with light cabinet fronts. However, dark wood does not make all items completely uniform: natural material retains differences.
As of the check date, there were seven Altair handles in wenge in stock, so a set of fourteen could not be assembled from the current inventory alone. This does not mean the product cannot be ordered. Availability of production, lead time, and the possibility of forming the required quantity of one configuration need to be clarified.

Altair wooden handle made of rosewood

Rosewood is the most expensive of the four options as of the check date. It should be chosen for the desired decorative effect, not for the sake of the species name itself. For fourteen handles, production confirmation is required first: only two pieces remained in stock.
If the furniture must be completed by a fixed date, you cannot pay for two stock items and decide the fate of the remaining twelve later. One order must contain the entire required volume or a clearly confirmed production schedule.

Altair wooden handle made of walnut

Walnut creates a warm woody accent and is usually easier to incorporate into a bedroom with beige, cream, taupe, and wood-toned surfaces. In our scenario, it is not the "correct by default" option, but one of two variants available in the required quantity as of the check date.
The walnut stock was 53 pieces. This allowed ordering 14 working handles and one spare without waiting for production, provided the remainder did not change before payment.

One wood species does not mean fourteen identical patterns

Natural wood is not a printed film. Even within a single species, the direction of the grain, line density, shade transitions, and placement of expressive areas vary. For a premium furniture set, this is not a defect in itself, but a property of the material. An error occurs when the customer expects industrially identical patterns but does not discuss this expectation before purchase.
Before placing an order, you need to decide which result is acceptable:

• natural variability without special selection;

• approximately calm group in overall tone;

• visual pairs for two identical nightstands;

• matching handles by photo before shipping;

• purchasing an additional part for self-layout.

It cannot be promised in advance that the store will perform photographing or matching. This is a separate request to the manager. If such a service is not confirmed, the buyer should assume natural differences of solid wood.
When laying out yourself, all handles are removed from individual packaging only after checking the quantity and condition. Then they are placed in the furniture scheme: six positions of the dresser in the center, four positions of the nightstands on the left and right. This way differences are assessed not by a single piece, but in the real rhythm of the facades.

Checking Altair HL-067M on the facade before purchasing the entire batch

The size 42 × 42 × 38 mm needs to be seen in volume. A paper circle or square of 42 mm shows the occupied area but does not convey the protrusion and ease of grip. The best test is one physical handle on a facade sample or a temporary fitting without irreversible drilling.
The following points are checked:

1. The handle does not look too large on the narrow drawer of the nightstand.

2. On the wide front of the dresser, one central knob remains convenient if such a layout has been confirmed by the cabinetmaker.

3. Fingers fit freely behind the handle.

4. The handle does not touch the adjacent front when opening.

5. The protrusion does not conflict with the wall, bed, or walkway.

6. The metal part matches the legs and other hardware.

7. The wood grain works with the front in both daylight and evening lighting.

Only after this check does the sample piece become the first handle of the future set. If it does not fit in scale or grip, there is no need to buy thirteen more just to keep the already selected item.

How to distribute the natural Altair grain across the dresser and two nightstands

After the batch is delivered, it is important not to start installation right away. For natural wood, it is useful to first do a dry visual layout.

Step 1. Lay out all handles with one side facing up

Place 14 or 15 Altair on a neutral surface and orient them identically relative to light.

Look at:

• overall tone;

• the contrast of the pattern;

• direction of fibers;

• pronounced dark/light areas;

• visual "activity".

You cannot compare one handle under a lamp and another in the shade.

Step 2. Do not look for "perfectly identical" pieces

The goal is not to reject everything that differs.

Natural wood is inherently variable.

You need to find a cohesive composition.

For zebrano, the stripes are especially noticeable. For wenge, the dark character. For walnut, warm tone transitions. Rosewood can be more active in pattern.

Step 3. First, form two groups of knobs

Two knobs are paired items.

From the batch, select:

• 4 handles for the first;

• 4 for the second,

so that the two groups look related when viewed together.

Step 4. Distribute the remaining six on the dresser

If the drawers are symmetrical, the pattern can be distributed mirror-symmetrically relative to the center.

If the dresser is vertical, you can make a smooth transition from top to bottom.

The main thing is one logic.

Step 5. Store the backup handle after comparison

The fifteenth piece may appear visually closer to one of the fourteen than another.

Therefore, first select 14 working pieces, and only then assign a backup.

If one handle is significantly different

Do not immediately consider it defective.

First determine:

• whether only the natural pattern differs;

• whether there is a coating defect;

• whether there is damage;

• whether the material matches the order.

If it is only about natural variability, you can:

• leave it as a backup;

• place it on a less visible facade;

• distribute compositionally.

If a defect is suspected, the issue is resolved with the seller before installation.

How to check the Altair mounting diagram before drilling fourteen facades

The handle size 42 × 42 × 38 mm is confirmed, but the original card does not provide sufficient basis for the article to independently invent:

• drilling diameter;

• screw length;

• depth of the carving;

• the exact position of the fasteners.

Therefore, before mass installation, one real set is needed.

Why the first handle should become the control one

On one facade, check:

• actual fastener;

• hole diameter;

• screw length;

• clamp;

• position of the metal base;

• the back side of the facade;

• possibility of installing a plug.

If after the first installation everything is confirmed, only then do they make a template for the remaining 13 facades.

One template is better than fourteen tape measure measurements

Even for a knob handle, a slight axis shift is noticeable in a long row of drawers.

For a dresser with six facades, an error of 2–3 mm on different drawers creates a "floating" vertical line.

A rigid template or jig allows repeating the same coordinate.

For two toggles, it is useful to use the same basic principle if the facade dimensions are the same.

What to do if the furniture is already drilled for old handles

This is a different scenario.

You cannot buy Altair based only on the external size of 42 mm.

Need to check:

• how many old holes;

• where they are located;

• whether the new base will cover the old hole;

• whether the mounting pattern matches;

• whether facade restoration is required.

If the old pull handle was attached at two points, and Altair uses a different pattern, the task becomes a repair one, not just a replacement of hardware.

Wide drawer: one or two Altair handles

In the original example, one handle per drawer is assumed, so the total is 14.

But for a very wide or heavy drawer, a cabinetmaker may recommend two grab points.

If at least one of the six dresser drawers requires two handles, the final count increases.

For example, two wide drawers get two Altair handles each instead of one:

14 + 2 = 16 working handles.

Then the entire availability and budget calculation must be redone before purchasing.

Why the knob handle shape does not negate the load on the front panel

The user pulls on a small element, and the force is transmitted through the fastener into the front panel.

Therefore, convenience cannot be judged only by the beauty of the wood.

Need to check:

• box size;

• the mass of the contents;

• guide resistance;

• facade thickness;

• quality of the fastening zone.

Altair does not publish specific permissible loads in the product card, so the article does not invent them.

Checking the current stock before ordering 14 or 15 furniture handles

As of August 26, 2026, the product card showed:

Material Altair HL-067M	Price per 1 pc.	Stock in St. Petersburg	Enough for 14	Enough for 15
Zebrawood	3,270 RUB	17 pcs.	Yes	Yes
Wenge	3,230 RUB	7 pcs.	No	No
Padauk	3,460 RUB	2 pcs.	No	No
Walnut	3,290 RUB	53 pcs.	Yes	Yes

This table records the state of the card on a specific date, not guaranteeing future availability. The stock may decrease between the preparation of the article and the checkout. For a set, not only the "in stock" label matters, but also the number of units of the selected material.
If the product is needed by a certain date, the order should be as follows:

1. Approve the material with a test pen.

2. Fix the exact quantity: 14 or 15.

3. Check the stock of the specifically selected wood species.

4. If the quantity is insufficient, request the production time for the entire missing part.

5. Clarify whether stock and custom-made handles will be visually acceptable in one set.

6. Only after confirmation, pay for the order and schedule installation.

Purchasing seven wenge handles now and seven later may be justified by deadlines, but increases the risk of differences between shipments. This risk must be accepted in advance, or choose a material available in full quantity.

How much does a set of Altair HL-067M of 14 and 15 pieces cost?

Based on the card prices as of the check date, the following product cost was obtained without delivery and additional parts:

Material	14 handles	15 handles with one spare
Zebrawood	45,780 RUB	49,050 RUB
Wenge	45,220 RUB	48 450 RUB
Padauk	48 440 RUB	51 900 RUB
Walnut	46 060 RUB	49 350 RUB

The lowest arithmetic sum in the table does not determine the best order. Wenge was slightly cheaper, but the current stock was not enough even for half a set. The buyer cares about the total cost of the solution, including lead time, delivery, possible reservation, and fittings, not just the minimum price of a single handle.
The estimate must contain separate lines:

• Altair HL-067M of the selected wood species — 14 or 15 pcs.;

• appropriate fasteners — confirmed quantity;

• decorative caps — only if they are actually required by the selected scheme;

• delivery;

• trial installation or mounting;

• possible restoration of old holes if the furniture has already been used.

If the Altair range does not fit the budget, wood species, or current stock, you can buy wooden handles for furniture choose another series. The alternative is selected before drilling all facades, as the mounting pattern and seating area may differ.

What is included in the order and why the card shows FUR-032 and FUR-033

On the Altair page, there is a "Hardware for mounting" field and a separate "Required hardware" block showing FUR-033 and FUR-032. But the mere display of two items does not answer three important questions:

• is the fastener included in the price of each handle;

• how many plugs are required per one Altair;

• which of the two plugs to choose for a specific configuration.

This information cannot be invented by analogy with another model. Before payment, you must request a written specification: handle, base, fastener, number of screws, head type, presence or absence of a decorative plug.
FUR-033 visually belongs to the cold metallic group. After checking, you can order the decorative cap FUR-033, but only if the seller has confirmed technical compatibility with Altair fasteners and the required quantity.
FUR-032 belongs to the warm bronze direction. Buying the decorative cap FUR-032 makes sense for the corresponding mounting and color solution, not because the item is automatically shown next to the handle.
Altair's table specifies stainless steel. Therefore, the color of the additional part should be matched primarily with the metal base of the handle and the actual installation location. Buying both FUR-032 and FUR-033 "just in case" for fourteen facades is poor commercial practice. First, determine the compatible option, then calculate the quantity.

FUR-032 and FUR-033: how not to turn additional hardware into an unnecessary purchase

The Altair HL-067M card shows both items in the "Required hardware" block. This is a useful signal, but not a ready-made specification for 14 handles.

FUR-033 is a decorative metal cap in nickel color, designed for an M4 screw with a semi-circular head.

FUR-032 is a decorative metal cap in antique bronze color, also intended to cover the screw head.

Why the presence of two caps next to Altair does not mean you need to buy both

Altair's own table designates the metal finish as "Stainless steel."

Therefore, visually FUR-033 in nickel is closer to the cold metallic direction. FUR-032 is warm antique bronze.

But color is only one question.

The second is technical:

• which screw actually fits into the Altair mount;

• is its head visible after installation;

• how many such heads per handle;

• whether a decorative cap is needed at all;

• whether a specific FUR is compatible with the actual screw from the kit.

The card does not give the article the right to automatically multiply 14 handles by 1 or 2 caps.

How to correctly count caps

The formula appears only after a test installation:

Nplugs = Nvisible compatible heads per handle × Nhandles.

For example, if after checking it turns out that one Altair needs one FUR‑033:

• for 14 handles → 14 plugs;

• for 15 → 15.

If there are two visible heads:

• 14 × 2 = 28;

• 15 × 2 = 30.

This is only an example of the method. The actual quantity must be confirmed with Altair fasteners.

Why you cannot order 28 FUR‑033 in advance "just in case"

If the actual scheme uses one visible point or a plug is not needed at all, half of the purchase will be superfluous.

For an expensive furniture set, the correct sequence is:

1. get one Altair;

2. install it with standard fasteners;

3. see the back side of the facade;

4. confirm the screw type;

5. choose FUR‑032 or FUR‑033;

6. multiply the confirmed quantity by 14/15.

After checking, you can order the decorative cap FUR-033 either Buy decorative cap FUR-032 in the actually needed quantity.

When FUR‑032 may be stylistically justified

Even if the Altair base is made of stainless steel, a second metal may be deliberately used in the interior — for example, antique bronze on legs or other decor.

But such a combination must be part of the project. Adding a bronze cap randomly just because it is shown next to the product is a weak decision.

Real estimate: pens, reserve, fittings, and cost of delay

The 14/15 Altair price table shows only the main product amount. For a full order, it is useful to split the estimate into four parts.

1. Main pens

For example, walnut:

14 × 3,290 = 46,060 RUB

2. Reserve

One spare:

+ 3,290 RUB

Total for 15:

49,350 RUB

3. Plugs and fasteners

Added only after confirmation

How to match wooden handles with a dresser and paired nightstands

A furniture set is perceived as cohesive when not only the handle model is repeated, but also the logic of its placement.
On paired nightstands, the axes should be mirrored relative to the bed or another central composition. If handles are centered on each drawer, distances from side and top edges must match. If an offset is chosen, it should be deliberate and symmetrical.
On a dresser, handles form a longer rhythm. The slightest vertical shift of one knob is more noticeable than on a single nightstand. Therefore, a single drilling template tied to the actual fronts is used, rather than measuring each point anew with a regular tape measure.
Before drilling, it is useful to lay out the handles in front of the furniture. The closest in tone can be distributed to the paired nightstands. More contrasting pieces can be placed on the dresser symmetrically relative to the center. This technique does not make the wood identical but turns natural differences into an organized composition.
If a ready finished series is needed, you can to order furniture handles with a coating after comparing models. Not all handles in the section can be considered interchangeable: they differ in size, protrusion, shape, and mounting.

When Altair HL-067M should not be bought for a set

It is better to refuse or postpone the purchase if the trial handle is uncomfortable on a wide drawer, the 42 mm size looks excessive on a narrow cabinet, or the protrusion obstructs passage. Do not order the full set until the furniture maker has confirmed that one button fits the design of each drawer.
Altair is also not the best choice if the customer requires fourteen pieces with absolutely identical printed patterns. Natural wood implies variability. In such a task, either the requirement must be changed, or a different material and surface technology must be selected.
Do not pay for fourteen wenge or palisander handles based on the general word "in stock" when the current quantity is insufficient. First, production and delivery time are agreed upon.
The purchase should also be paused when the hardware package is unclear. Facades cannot be drilled based on assumptions about the diameter, length, and shape of the screw. First, obtain the drawing and one handle set, then make a template.
If you like the combination of wood and metal, but the Altair shape is not suitable, you can compare the Alcor HL-066M handle. This is a separate product, so the decision is made anew based on its card, not automatically transferred from Altair.

Mistakes when ordering fourteen furniture handles

They count items, not opening facades

They write "dresser and two nightstands" in the order but do not specify the number of drawers. As a result, the wrong number of handles arrives.

Mixing wood species for immediate availability

Seven wenge handles are supplemented with seven zebrano ones because both items are in stock. Functionally, the furniture can be assembled, but a unified set is not achieved.

They expect an identical pattern from natural wood

One article number and one wood species ensure a common product configuration, but do not clone wood fibers.

They do not order a test handle

After delivery, it turns out that the protrusion interferes with the grip or the size is too large for the cabinet.

They buy plugs without confirming compatibility

The color seems suitable, but the fit or fasteners do not match.

They do not check the entire remaining stock of the selected wood species

The product page says "in stock," but there are fewer units than needed for the set.

They split the order into batches unnecessarily

The first half is installed immediately, the second arrives later with a noticeably different pattern. The possibility of differences must be considered before splitting.

They do not leave a reserve when the installation deadline is critical.

One damaged handle stops the delivery of three pieces of furniture.

They drill all facades before checking one assembly.

A mistake in the template repeats fourteen times. First, they install one handle on a test or least noticeable facade and check the result.

How to order Altair in one batch and not accidentally split the set.

For three pieces of furniture, it is better to aim for one coordinated order, especially if a uniform wood character is important.

This does not mean that all 14 handles will have identical grain. But a single purchase simplifies:

• checking the quantity;

• distribution of shades;

• control of the metal finish;

• working with a single version of the card;

• assembly according to one template;

• storage of a spare part.

What to write to the manager

The request should be specific.

Not:

“We need Altair handles for the dresser and nightstands.”

And, for example:

Altair HL‑067M / walnut / stainless steel / 15 pcs., of which 14 working + 1 spare. Please confirm the availability of the full quantity of one product configuration, shipping time, composition of fasteners for one handle, and a technically compatible decorative plug.

If the natural pattern is important, as a separate line:

“Is it possible to check the set before shipping for the absence of a part that sharply stands out in overall tone? If such a service is not provided, please let me know.”

This way, the buyer does not turn their own wish into a non-existent obligation of the seller.

Why you cannot place three independent orders for furniture

For example:

• today 6 pens on the dresser;

• in a week 4 on the first nightstand;

• in a month 4 on the second one.

Functionally, this is the same item. But the risk of differences increases:

• the stock changes;

• the batch changes;

• the selected material may run out;

• prices change;

• part of the order goes into production.

If the furniture should look like a single set, the purchasing unit is all three items together.

What to do if furniture is manufactured at different times

Suppose the dresser is ready now, and the nightstands in a month.

Handles can still be ordered in one batch and stored until installation, if storage conditions allow.

Advantage: the material and configuration are already fixed.

Disadvantage: you need to safely store expensive hardware and not lose individual parts.

Accepting the batch before handing it over to the furniture maker

After receiving the box, do not hand it over for installation immediately.

First:

1. recount the handles;

2. check the material;

3. check the metal finish;

4. inspect the tree and coating;

5. set aside the reserve separately;

6. do a visual layout;

7. only then hand over the marked groups to the master.

If 15 are ordered, the box must contain 15 Altair of the required material, not 14 + a random different wood species.

How to mark three groups

Simple option:

• C — dresser, 6 pcs.;

• L — left bedside table, 4 pcs.;

• R — right bedside table, 4 pcs.;

• S — stock, 1 pc.

If the pattern is already distributed, each handle gets a code:

C1–C6, L1–L4, R1–R4, S1.

After that, the cabinetmaker does not swap them.

What to do if one of the 14 working handles is damaged before installation

If there is S1:

• we replace the damaged one;

• we do not install the damaged one "on a less visible drawer" without assessment;

• after installation, we decide whether a new reserve is needed.

If there is no reserve:

• installation can continue on the remaining fronts;

• But the final delivery of the set depends on a repeat shipment.

This is the practical price of solution 14 versus 15.

Final decision tree for Altair HL‑067M

Has the number of facades been confirmed by the cabinetmaker?

• no → do not buy the entire batch;

• yes → next question.

Is one button convenient on the widest drawer?

• no → recalculate the layout;

• Yes → continue.

Does the trial Altair 42 × 42 × 38 mm fit in terms of grip and scale?

• no → compare another model;

• Yes → continue.

Is one breed selected?

• no → attach options to the facade;

• Yes → continue.

Is there enough in stock for 14/15?

• yes → can form one order;

• no → confirm production or choose another breed.

Need a spare?

• critical deadline/rare material/important future replacement → 15;

• risks acceptable → 14.

Fasteners and plugs confirmed?

• no → do not drill;

• yes → test installation.

Did the control setup succeed?

• yes → replicate the template;

• no → stop mass installation and fix the node.

Thus, a commercial query like "buy furniture knob handle" ends not with a cart of 14 random items, but with a verified specification of the furniture set.

Final check before mass drilling

After receiving the entire batch, it is useful to repeat three control operations in one day: lay out 14 working handles on the furniture, install one Altair with real fasteners, and compare both nightstands with the dresser under the same lighting. If after this the wood type, quantity, or handle position changes, it is better to correct the specification before drilling. After fourteen holes, the decision becomes significantly more expensive.

For a project of three items, a unified hardware program is considered complete only when not abstract words like "identical handles" match, but specific parameters: Altair HL‑067M article number, one selected wood type, metal finish, confirmed quantity, mounting scheme, distribution across facades, and reserve. This specification should be sent simultaneously to the buyer and the furniture maker.

Order specification for Altair HL-067M

Before payment, it is convenient to send one table to the manager and the furniture maker.

Field	Example of filling in
Model	Altair HL-067M
Size	42 × 42 × 38 mm
Furniture	Chest of drawers and two nightstands
Working quantity	14 pcs.
Reserve	1 pc. or cancellation of reservation
Total to order	15 pcs. with selected reservation
Material	Only one wood type: e.g., walnut
Metal finish	Stainless steel
Current stock	Confirm immediately before payment
Fastening	Confirm composition and dimensions in writing
Caps	Model and quantity after compatibility check
Layout	6 handles for the chest, 4 for each nightstand
Installation	According to a single verified template
Lead time	Warehouse shipment or confirmed production

The specification is accompanied by a photo of the facade, dimensions of each drawer, axis layout, and selected wood species. If visual wood selection is needed, the request is recorded separately and confirmation is obtained that it is feasible.

How to place an order for wooden handles without repeat purchasing

First, count the facades and confirm with the cabinetmaker the number of handles on each. Then choose one Altair for physical fitting. Check the scale, grip, protrusion, metal, and wood on the dresser and on the smallest nightstand.
After approving the trial handle, decide whether a reserve is needed. For our project, this is 14 working items or 15 with one spare. Choose one wood species and check whether the current stock is sufficient for the full quantity. If not, do not split the order without discussing possible differences between batches.
Request hardware and caps as a separate line item. Do not add FUR-032 and FUR-033 simultaneously until a technically and visually suitable model is determined. After that, verify the product cost, delivery, and lead time.
The final stage is performed before mass drilling. Install one handle, open the drawer several times, check the grip and absence of contact with adjacent parts. Only after a successful test, transfer the unified template to the remaining thirteen facades.
Thus, the buyer orders not abstract "beautiful wooden handles," but a complete hardware program: a specific article, one wood species, agreed quantity, reserve, clear configuration, and verified installation. It is this sequence that turns the dresser and two nightstands into a true set.

FAQ

How many Altair HL-067M handles are needed for a dresser with six drawers and two nightstands with four drawers each?

With one handle per drawer, 14 pieces are required: 6 + 4 + 4. The layout of one handle must be confirmed by the cabinetmaker, considering the width and opening force of the drawers.

Do I need to buy a fifteenth spare handle?

This is not a mandatory rule. A spare is useful for a tight installation deadline, risk of damage, and the desire to keep a replacement from the same purchase for the future.

What are the dimensions of the Altair HL-067M wooden handle?

The card indicates 42 × 42 × 38 mm. Before a bulk purchase, the size and protrusion are physically checked on the smallest and largest fronts of the set.

What wood species are available for Altair?

The card features zebrano, wenge, palisander, and walnut. The current availability of each item must be checked before payment.

Will fourteen handles of the same wood species be completely identical?

There is no guarantee of an identical natural pattern. The same species and the same article number create a common configuration, but natural fibers and shades differ.

Can zebrano and wenge be mixed on one set of furniture?

Technically it is possible, but it will result in a deliberately mixed composition rather than a uniform, calm set. Such a decision needs to be designed, not used as a random replacement for a missing quantity.

Is the mounting hardware included in the price of Altair HL-067M?

The card shows the mounting hardware field and related plugs, but before ordering a batch, the exact contents of each handle's kit must be confirmed in writing.

How many plugs are needed for fourteen handles?

The quantity cannot be determined without a confirmed mounting scheme for Altair. First, clarify the number of visible mounting points per handle and the compatible plug model, then multiply by 14 or 15.

Which plug should I choose: FUR-032 or FUR-033?

The choice depends on technical compatibility and the desired metallic shade. FUR-033 belongs to the cool group, FUR-032 to the warm bronze group. Compatibility with the specific fastener must be confirmed.

Can I order wenge if there are fewer than fourteen pieces in stock?

You can request production of the missing quantity, but the timeline and possibility of forming a single shipment must be confirmed by the seller. A general 'in stock' status is not sufficient.

Do I need to drill the facades first or buy the handles?

First, obtain one handle with the actual fastener, test it on the facade, and make a precise template. Mass drilling based on assumed dimensions risks repeating an error across all the furniture.