Buy a designer coffee table for a classic living room seems like a simple task, until two models from the same collection are nearby. Versailles 002-005 and Versailles 002-010 are made in a similar artistic system, complement furniture with carved decor, and are available in beech or oak options. But they cannot be chosen only by finish or photo: one table is taller and more compact, the other is lower, wider, and designed for a central spot in front of the sofa.

Versailles 002-005 has dimensions of 690 × 750 × 620 mm. The height of 620 mm makes it convenient for a local area next to an armchair, between two armchairs, or in a study where a cup, book, and small lamp should be closer at hand. Versailles 002-010 is noticeably larger — 1200 × 900 × 450 mm. Its oval tabletop and low profile suit a sofa group where a wide central surface is needed for books, drinks, serving, and decor.

The difference of 170 mm in height and hundreds of millimeters in tabletop area completely changes the usage scenario. The coffee table 002-005 may be too high in front of a low sofa, while the side table 002-010 may be excessively large next to a single armchair. Before purchasing, you need to match the table with the seat and armrest height, mark the dimensions on the floor, check the passages, and understand whether the item should serve one person or the entire upholstered furniture group.

You can view in the catalog classic occasional and coffee tables, but this article focuses on two specific Versailles models. Let's compare their sizes, materials, finish, tabletop construction, placement in the room, and order package so that the buyer arrives not at an abstract "beautiful table" but at the right product card.

Go to Catalog

A coffee table and an occasional table are not the same thing

Names in furniture catalogs help with orientation but do not replace dimensions. A coffee table is often taller and more compact because it is placed next to an armchair or a small group for conversation and tea. An occasional model is usually lower and has a larger area to serve a sofa and several seating spots. However, there is no universal standard that automatically suits any living room: the actual height of upholstered furniture and free space are more important than the term.

Coffee table: closer at hand and smaller in area

A tall compact model is convenient where a person sits in an armchair and reaches for the tabletop from the side or diagonally. It does not need a large central area. The surface holds a cup, glass, book, phone, small tray, or tabletop decor. Such a table creates an independent small zone and does not require wide space in front of the sofa.

Versailles 002-005 follows this logic in proportions: the height of 620 mm is noticeably greater than that of the side table model, and the tabletop dimensions are significantly more compact. This is an editorial conclusion based on dimensions, not a promise that the item will automatically suit any armchair. Before ordering, you still measure the armrest and check access while seated.

Our factory also produces:

View Full Product Catalog

Side table: lower and wider

The low table in front of the sofa should remain accessible to several people and not block the view. The wide tabletop accommodates magazines, books, a tray, drinks, and a composition of decorative items. That is why the Versailles 002-010 has a height of 450 mm and dimensions of 1200 × 900 mm. It functions as a central piece for the seating area, not as a side table for a single armchair.

A height of 450 mm does not mean the model should be placed in front of any sofa. Upholstered furniture varies in seat height, seat depth, and cushion thickness. The table may be comfortable, slightly lower or slightly higher than the seat—this is assessed in a specific room, not by a universal formula.

Get Consultation

Why the product name is insufficient

In a store, you may find a compact item called a magazine table, or a large table labeled as a coffee table. If you rely only on the word, you can easily buy furniture of the wrong scale. For Versailles, the choice is clearer: 002-005 is more compact and taller, 002-010 is wider and lower. But the final decision is still made based on the room layout and upholstered furniture.

What dimensions are needed before purchase

Record the seat and armrest height, sofa length, distance from the sofa to armchairs, width of the main passage, doorway, and free floor space. For 002-010, additionally check the delivery route because the model comes assembled. For 002-005, it is important to understand whether there will be enough space next to the armchair and whether you can freely walk around it with a cup in hand.

Specifications of Versailles 002-005 and 002-010

Parameter Versailles 002-005 Versailles 002-010
Type Coffee table Coffee table
Size 690 × 750 × 620 mm 1200 × 900 × 450 mm
Proportions More compact and taller Wider and lower
Material Beech or oak Frame made of beech or oak; tabletop depends on selected configuration
Confirmed finishes white enamel RAL 9010, cherry tint, walnut tint with patina White enamel RAL 9010, cherry stain, walnut stain with patina; the description also includes enamels, transparent stains, varnishes, and patinas
Tabletop shape Specified according to the drawing and photos of the card Oval, profiled
Construction Finished coffee table of the Versailles collection Carved underframe, cabriole legs, curved aprons
Supply In a rigid plywood box Assembled and painted, in a rigid plywood box
Main Scenario Next to the armchair, between armchairs, local area In front of the sofa, center of the soft seating group

The table immediately shows why the models are not interchangeable. Versailles 002-005 wins where height and compactness matter. Versailles 002-010 is needed by a buyer who requires a large oval surface and a low center of the living room. The material and color are chosen after the function is determined: good finishing will not fix a mistake in size.

Versailles 002-005: when to buy a coffee table

Versailles 002-005 is an option for a buyer who is looking not for a wide table in front of the sofa, but for a separate high surface. The size 690 × 750 × 620 mm allows placing the item in an armchair area, study, library, small bay window, or next to the sofa on the side, if the passage and height of the upholstered furniture allow it.

What the size 690 × 750 × 620 mm provides

The height of 620 mm brings the tabletop close to the armrest level of many armchairs, but exact matching needs to be checked. The dimensions 690 × 750 mm are noticeable enough for serving and decor, yet the model does not occupy an area of 1200 × 900 mm like a coffee table. This makes it convenient for small areas where a large central item would obstruct movement.

Placement next to one armchair

Place a mockup of 690 × 750 mm on the floor and sit in the armchair. Check if you can reach the far part of the tabletop without turning your body excessively. Leave free space between the furniture for your hand and textiles. The table should not press against the armrest or hinder getting up.

If the armchair is very compact, 002-005 may appear larger than expected. Then it is important to assess not only the physical possibility of installation but also the scale. A tall carved item next to a light modern armchair can draw attention. In the armchair area of the Versailles collection, such a combination feels more natural.

Between two armchairs

In a paired composition, the table serves two seated people. Its height makes drinks and books accessible from both sides, while its compact size helps maintain conversational distance. The armchairs should not press their armrests against the tabletop, and the passage to the seats remains clear.

Small tea area

A tray, cups, a teapot, and a small dessert can be placed on the surface. However, a coffee table does not replace a dining table: its height and position relative to the armchairs are designed for casual serving, not for prolonged meals on regular chairs.

Beech or oak

Both species are confirmed by the card. Beech is often chosen for white enamel when the wood grain should not be dominant. Oak is logical for walnut tinting or other transparent finishes that emphasize texture. The decision is linked to the armchairs, console, doors, and other furniture, not made in isolation.

White enamel, cherry, or walnut with patina

White enamel RAL 9010 makes the carved table lighter and helps integrate it into a calm classic living room. Cherry tinting adds a warm reddish hue. Walnut with patina emphasizes the relief and suits a darker classic setting. On screen, the color depends on the device, so for a complex interior, it is wise to request a finish sample.

When the task and dimensions match, you can buy the designer coffee table Versailles 002-005 and check current material options, price, and order status in the product card.

Versailles 002-010: when a coffee table is needed

Versailles 002-010 was designed as a low centerpiece for a soft seating group. The size 1200 × 900 × 450 mm, oval profiled tabletop, and carved base give it a different role than 002-005. It is not a side surface next to a single armchair, but a prominent piece in front of the sofa or between the sofa and a pair of armchairs.

Size 1200 × 900 × 450 mm

The length of 1200 mm allows the table to be paired with a large sofa, while the width of 900 mm provides useful surface area for a tray, books, flowers, and decorative arrangements. However, these dimensions require free space in the room. In a small living room, an oval table can take up most of the walkway and force an awkward path around the furniture.

The height of 450 mm is designed for use with sofas and armchairs, as directly stated in the product card. Nevertheless, before ordering, measure your own seat height. If the sofa is unusually high or low, the difference may affect serving convenience.

Placement in front of the sofa

The table is placed centrally or slightly offset relative to the soft furniture, depending on the walkway and layout. It is important that seated individuals can place a cup without standing up, but that knees and legs do not hit the base. Masking tape on the floor helps check not only the outer oval but also the movement path around it.

Oval tabletop

The oval softens the large dimensions and makes it easier to walk around compared to a rectangle of the same size. It has no protruding sharp corners, but this does not eliminate the need to check walkways. The profiled edge and carved construction make the tabletop a decorative part of the model, so a tablecloth or overly large decor should not completely hide the shape.

Cabriole legs and carved underframe

The card describes elegant cabriole legs, curved aprons, and carved floral decor. This design creates the recognizable silhouette of French Baroque. On the practical side, the table requires space to be appreciated: if it is squeezed between a heavy sofa and a wall, the underframe will be barely visible, and a large object will start to obstruct the passage.

MDF under enamel

For opaque painting, the tabletop can be made of MDF. This option is logical when a white or other enamel color is chosen and the natural wood grain should not show through. The frame is then made of beech or oak solid wood depending on the order.

Combined tabletop for transparent finish

For tinting and clear lacquer, a combined construction is provided: an MDF base, a solid wood edge banding, and veneer overlay. Beech or oak are available. This scheme helps preserve the expressive wooden look of a large surface while controlling the tabletop's geometry.

It is important for the buyer not to shorten the description to the phrase "oak table". An oak frame does not automatically mean a solid oak tabletop. The specification records the material of the frame, edge banding, veneer, and the chosen finish. This affects the appearance and cost of the order.

Delivery in assembled form

Versailles 002-010 is delivered assembled and painted, in a rigid plywood box. For the buyer, this means ready geometry and no home assembly, but at the same time requires checking doorways, elevator, stair turns, and the route to the room in advance. The package dimensions should be clarified with the manager before delivery.

For the central sofa group, you can buy the Versailles 002-010 coffee tableafter pre-agreeing on the tabletop material, finish, current price, and the possibility of bringing in the assembled product.

Comparison of models 002-005 and 002-010

Criterion Versailles 002-005 Versailles 002-010
Type Coffee table Coffee table
Size 690 × 750 × 620 mm 1200 × 900 × 450 mm
Height 620 мм 450 мм
Main zone Next to the armchair or between armchairs In front of the sofa or in the center of the soft seating group
Usable surface Local serving, book, lamp, decor Tray, books, drinks, and a general composition for multiple seats
Material Beech or oak Frame made of beech or oak; countertop selected according to the design
Tabletop Specified in the model's card and specification Oval; MDF under enamel or combined under a transparent finish
Room scale Small or local area Medium and spacious living room
Supply Rigid plywood box Assembled and painted, rigid plywood box

Quick conclusion: 002-005 is chosen for height and compact function, 002-010 for a wide low surface. If a buyer tries to use 002-005 instead of a central coffee table, they risk having an item that is too high in front of the sofa. If they place 002-010 next to a single armchair, the area may be unjustified.

How to match a table to the height of upholstered furniture

Measure the seat height

Place the tape measure from the floor to the top of the seat without pressing the cushion too hard. This is a basic reference for a coffee table model. Versailles 002-010 with a height of 450 mm should be checked against the actual sofa, not the average norm from the internet.

Measure the armrest

For 002-005, the armrest level is especially important. The tabletop can be slightly lower, at the same level, or higher — comfort depends on the seating and hand position. Place a temporary surface 620 mm high next to the chair and try placing a cup on it.

Determine the direction of access

A table in front of a sofa is used from the front, a side table from the side. The same level is perceived differently due to body movement. For a chair group, check access from both sides. For a sofa, evaluate the far edge of the tabletop 002-010.

Consider the thickness of the tabletop and the underframe

External height is not the only parameter. A carved underframe takes up space under the surface. The seated person's legs should not hit the aprons or legs in a normal sitting position. For 002-010, this is especially important due to the large oval shape.

Do not replace measurements with general advice

A general article can help understand the principles, and if necessary, you can read the material how to choose a coffee table. But for Versailles, the specific dimensions of the two models and your upholstered furniture remain decisive.

How to check if the table will fit

Draw the outline on the floor

For 002-005 mark a rectangle 690 × 750 mm, for 002-010 — 1200 × 900 mm. It is better to show the oval model not only with a rectangular frame, but also round the contour with tape or cardboard. Leave the layout for a few days and use the room as usual.

Check the main passages

Walk from the door to the sofa, window, and adjacent room. Consider not the empty surface, but future legs, protruding parts of the chair, and people who will be sitting. The table should not force you to constantly turn sideways.

Check the opening of doors and drawers

In the living room there may be a cabinet, display case, chest of drawers, or balcony door. Open everything with the layout unfolded. Versailles 002-010 easily blocks a pull-out drawer if placed too close to the cabinet furniture.

Consider the movement of chairs

Chairs are shifted, turned, and moved back. The 002-005 table between two chairs should maintain a safe gap even after a small movement. Furniture legs should not collide.

Assess the visual scale

An object may physically fit but look too large or too small. Place several books and a tray on the layout to imagine the height and filling. For 002-010 it is useful to place boxes 450 mm high, for 002-005 — 620 mm.

Quick situational selection

Buyer's task Recommendation Why
Place a table next to a single armchair Versailles 002-005 Height 620 mm and compact dimensions suit a local area
Create a composition between two armchairs Versailles 002-005 The table serves two seats without a wide central surface
Place a table in front of a large sofa Versailles 002-010 Low height 450 mm and area 1200 × 900 mm are designed for a soft seating group
Arrange books, a tray, and decor Versailles 002-010 Oval tabletop provides a large usable surface
Need a compact accent in the study Versailles 002-005 Takes up less floor space and is convenient next to an armchair
Need a central piece for a spacious living room Versailles 002-010 The carved base and large oval shape stand out in the center of the room
Need a height of 620 mm Versailles 002-005 This is the confirmed height of the coffee table model
Need a height of 450 mm Versailles 002-010 This is the confirmed height of the side table model

Beech or oak: which material to order

Both models are available in beech and oak, but the choice of wood species is tied to the finish. Beech has a calm grain and is often used under opaque enamel. Oak has a more pronounced pattern and is revealed under transparent tinting, varnish, and patina. If all the furniture in the living room is already made of one wood species, it is better to match the table to it.

Beech for white enamel

White enamel RAL 9010 hides the natural pattern and shifts attention to the silhouette, carving, and proportions. Beech is rational for such a task. On 002-005, the white finish makes the high table visually lighter. On 002-010, it emphasizes the oval tabletop and cabriole legs, but the large size still remains noticeable.

Oak for visible texture

Oak is chosen when the surface should look wooden, not just painted. Walnut tint with patina makes the carving visually deeper, clear varnishes preserve the pattern, and cherry shade adds warmth. On the large tabletop 002-010, the requirements for veneer selection and tinting are especially high.

When the living room should be of one wood species

If an oak console, chairs with a wooden frame, and a mirror in a carved frame stand nearby, a beech table under a transparent finish may differ in pattern. With enamel, the wood species is almost invisible, so a uniform color is sometimes more important than a uniform material. With transparent tinting, it is better to coordinate the wood species and sample.

How to understand finish designations

Before ordering, it is useful to study quality of materials and finishes STAVROS. The difference between preparation for enamel and for tinting affects the selection of lamellas, wood type, and expected result. For finished Versailles furniture, the finish is selected as part of the order, not performed by the buyer after delivery.

How to choose a Versailles 002-010 tabletop

The magazine model requires a separate solution for the tabletop. The frame is made of beech or oak solid wood, but the surface can have a different design. This must be recorded in the specification so that the buyer understands what material they see and what they are paying for.

MDF for opaque enamel

If the table is needed in white or colored enamel, an MDF tabletop creates a smooth base. The wood grain is not visible, so the main focus becomes the color, edge profile, and carved underframe. This option pairs well with painted classic furniture.

Combined construction

For transparent finish, an MDF base is used, along with a solid wood edge banding and veneer. The edge banding forms a durable and expressive edge, the veneer provides a natural pattern over a large area, and the base helps maintain geometry.

Why 'oak table' needs clarification

The buyer may understand this phrase as a table entirely made of solid oak. Card 002-010 describes a more complex construction. It is correct to say: oak frame and selected combined tabletop with oak edge banding and oak veneer — if that specific specification is agreed upon.

What to write in the order

Specify the frame wood species, tabletop base material, edge banding material, veneer type, tint color, lacquer, patina, and gloss level. If the table must match chairs or a console, attach a sample or the approved finish number.

How models work in different rooms

Living room with one sofa

For central placement, 002-010 is more suitable. Its length of 1200 mm corresponds to the sofa, and its height of 450 mm creates a low horizontal line. 002-005 can be placed on the side if an additional surface near the armrest is needed.

Living room with two armchairs

Between armchairs, 002-005 is more convenient. It maintains symmetry and does not stretch the group to a width of 1200 mm. If the armchairs are opposite the sofa and form a large composition, the central 002-010 can become the main one, and 002-005 the additional one.

Study and library

A high coffee table is suitable next to a reading armchair. It is convenient for holding a book, cup, and glasses. The 002-010 coffee table is appropriate in a formal office with a sofa and several seating areas.

Boudoir or bedroom

002-005 can be used in a small relaxation area if the room is spacious enough. 002-010 requires a larger bedroom or a separate boudoir. Do not place a coffee table in the passage between the bed and wardrobe just for decorative effect.

Hotel and meeting area

In a lobby or meeting room, 002-010 creates a common surface for guests. The tabletop composition, protective finish, and delivery route must be coordinated with the intensity of use. 002-005 is suitable for small armchair islands and premium category rooms.

What to buy together with the Versailles table

A single model rarely exists in a room in isolation. A coffee table needs a chair of matching height, a side table needs a sofa group and background items that support the material and finish. Purchasing within one collection helps avoid random discrepancies in carving, wood species, and color.

For 002-005, a natural pairing is the Versailles chair for the coffee area. Next to the coffee table 002-010, you can place a Versailles mirror in a wooden frame or a classic Versailles console, if room dimensions allow. It is convenient to assemble a full setting through the section Classic STAVROS furniture.

What to add to the purchase Why Which model fits What to Check
Versailles Armchair 004-001 Assemble the seating area in one collection First of all, 002-005 Armrest height, material, and finish
Versailles Mirror 008-002 Support carved decor and expand the living room composition Both models Wall size, reflection, and finish match
Versailles Console 006-001 Create a second functional surface by the wall More often in a spacious room with 002-010 So the console and table don't compete in scale
Finish sample Coordinate enamel, tint, and patina Both models Light in the room and adjacent items
Design project Check layout, passages and furniture set Especially 002-010 Exact room dimensions and delivery route

If the arrangement is complex and several items need to be coordinated by scale, you can order an interior design project. This is especially useful for a large living room, hotel lobby, and a room with several items from the Versailles collection.

How not to confuse these tables with similar products

Coffee table and side table

The difference is not limited to the name. The Versailles 002-005 coffee table is taller and more compact, while the 002-010 side table is lower and wider. If the item is needed next to an armchair, consider side access and armrest height. If in front of a sofa, consider seat level, tabletop area, and clear passage.

Coffee table and end table

A side table is usually placed as close as possible to a sofa or armchair, sometimes partially slid under the furniture. Versailles 002-005 is a standalone carved table with dimensions 690 × 750 mm. It should not be perceived as a lightweight mobile stand that is constantly moved with one hand.

Coffee and dining table

The height of 450 mm is not designed for standard seating at dining chairs. Versailles 002-010 is convenient for a sofa area, serving drinks, and placing books, but does not replace a dining table. Attempting to use it for regular meals will result in uncomfortable seating.

Solid wood frame and solid wood tabletop

For 002-010, the frame is made of beech or oak, and the tabletop can be MDF with enamel or combined. The entire model cannot be automatically called solid wood. The composition is specified in the order specification.

Enamel and transparent tinting

Enamel creates a smooth opaque color and hides the wood grain. Tinting and clear varnish preserve the texture, so the species, veneer, and element selection are especially important. Walnut with patina is not just 'brown paint': the finish should emphasize the carving and relief.

Practical choice for specific tasks

Need a table for reading by the armchair

Choose 002-005 if the height of 620 mm is comfortable relative to the armrest. The tabletop can accommodate a book, glasses, a cup, and a small lamp. Check that the item does not block access to the armchair and power outlet.

Need a table in front of a three-seater sofa

002-010 is better suited for the task due to its length of 1200 mm and low height of 450 mm. Mark an oval on the floor and check if a person can sit in the center of the sofa without walking around the table along a tight path.

Need to design a small classic living room

Do not choose a large model just because it looks more impressive in the catalog. 002-005 can provide the desired character without overloading. If the table must stand in front of the sofa, perhaps no model will fit without rearranging — it is more honest to find this out before ordering.

Need a centerpiece for a spacious room

Versailles 002-010 reveals itself when there is air around the oval tabletop and the carved base is visible from several sides. It suits a large sofa group, a meeting area, and a hotel lobby.

Need a white set

Beech under white enamel RAL 9010 is a rational combination if the texture should not show. Coordinate the same color and gloss level for armchairs, console, and mirror. Different white shades next to each other are more noticeable than they seem in individual photos.

Need a dark wood interior

Oak in walnut tint with patina emphasizes the natural structure and carving. For 002-010, it is important to coordinate the frame, trim, and veneer. For 002-005, check how the shade looks next to the armchair and flooring.

The table is needed for a hotel or office

Assess the intensity of use, cleaning, delivery route, and possibility of local repair. 002-010 is suitable for a common area, 002-005 for individual seating groups. For a large batch, it is useful to keep a finish sample.

Mistakes when buying

Choosing only by photo

In the photo, models may appear close in size. In reality, 002-010 is almost twice as long as a coffee table and 170 mm lower. A paper plan and a volumetric mockup are mandatory for an informed choice.

Ignoring the height of the sofa

The buyer sees a beautiful coffee table and does not measure the seat. As a result, the surface turns out to be uncomfortable. There is no universal value: they check specific 450 or 620 mm next to their furniture.

Purchasing 002-005 as a central table

A tall model may block the view and be uncomfortable in front of a low sofa. It is intended primarily for a local area. An exception is possible only after a real mockup.

Purchasing 002-010 for a single armchair

Width

Underestimating weight and lifting

Large wooden furniture in a rigid box requires organized delivery. Do not plan to lift it yourself without information about weight, packaging, and number of people. These details should be clarified before delivery.

Too many items from one collection

A unified finish is useful, but the room should not turn into a dense set of carved furniture. Leave free walls and passages. The table, chairs, console, and mirror should have separate zones.

Expectation of mobility

Versailles is ready-made classic furniture, not a lightweight folding table. If the item needs to be moved daily, it is better to choose a different type. This especially applies to assembled 002-010.

Who Versailles 002-005 is suitable for

The model suits the owner of an armchair group, study, library, or small lounge area. It is useful when a height of 620 mm, compact serving, and an expressive classic piece without a wide coffee table surface are required.

002-005 may not suit a large sofa group, low upholstered furniture, or a room where only a narrow passage is free. It will also be unnecessary if the buyer is looking for a lightweight side table that is constantly moved.

Who Versailles 002-010 is suitable for

The coffee table model is designed for a spacious living room, central placement in front of the sofa, hotel lobby, study, or meeting area. It suits a buyer who needs an oval surface of 1200 × 900 mm and a height of 450 mm.

002-010 may not suit a small room, a single armchair, and a complex delivery route. It requires checking passages and is not intended for someone who wants to frequently move the table.

Care, storage and operation

Care depends on the finish. Enamel is cleaned with a soft cloth without abrasives, clear lacquer and tinting are cleaned with products compatible with the coating. Liquid is not left on the countertop for a long time, hot items are placed on stands, and heavy decor is distributed without impacts on the profiled edge.

Detailed rules for caring for furniture made of wood and MDF help preserve enamel, veneer, solid wood and carved decor. The table is not pulled by the carved aprons and is not lifted by the edge of the tabletop without an agreed method of moving.

How to prepare for delivery

Versailles 002-010 arrives assembled and painted. Measure the front door, elevator, stair landing, corridor turns and room opening. You need to compare not only the dimensions of the table, but also the dimensions of the rigid plywood box, which are clarified before ordering.

For 002-005, rigid packaging is also provided. Prepare the unpacking area and do not place the box on a wet floor. It is better to check the terms of calculation and transportation in advance on the page terms of payment and delivery of furniture.

Inspection before delivery 002-005 002-010
Place in the room 690 × 750 mm plus passage 1200 × 900 mm plus passage
Height 620 mm relative to the chair 450 mm relative to the sofa
Delivery access Check packaging and turns Especially careful: the model is delivered assembled
Lifting Coordinate weight and number of movers Coordinate the weight, box, and lift
Unpacking Prepare a clean area Ensure space around a large table

How to evaluate a table in real life, not in a picture

Check it from a seated position

Photos show the item from a convenient angle, but it will be used while sitting. Place boxes of the required height and width, sit on a sofa or armchair, and try to put a book, place a cup, or pick up an item from the far edge. For 002-005, side access is important; for 002-010, access from multiple seats of the sofa group is important.

Look at the furniture under evening lighting

White enamel, cherry, and walnut with patina change under warm and cold light. Patina highlights carving more under side lighting, and a white surface may appear warmer near yellow lamps. The finish sample is evaluated where the table will be placed.

Compare the table with the carpet

The rug defines the visible boundary of the soft zone. 002-010 should either be confidently within this area or be consistent with it in proportions. A rug that is too small under a large oval table visually compresses the room. 002-005 next to an armchair may partially rest on the rug, but all legs must have stable support.

Consider the decorative filling

An empty tabletop seems lighter. After placing a tray, books, flowers, and candles, a large model becomes even more noticeable. On 002-010, you don't need to fill the entire surface. On 002-005, overly tall decor interferes with conversation between two armchairs.

How to calculate the budget without hidden surprises

The final cost consists not only of the model's price. Material, finish, patina, the construction of the 002-010 tabletop, packaging, delivery, lifting, and possible design project affect the overall budget. Current amounts should be requested after selecting the configuration, rather than comparing only the starting prices in different lines of the card.

Frame material

Beech and oak have different costs and different visual meanings. Under white enamel, beech is often more rational. For visible texture, oak justifies the choice, especially in walnut tint or clear varnish.

002-010 tabletop construction

MDF under enamel and a combined version with veneer solve different problems. Comparing them only by price is incorrect: one creates an even color, the other preserves the wood grain. In the order, you need to get a calculation for your specific configuration.

Furniture set

If chairs, a console, and a mirror are purchased together, coordinating a single finish reduces the risk of mismatch. However, the total cost increases not only due to the number of items: different packaging, lifting, and separate placement may be required.

Delivery and carry-in

Large assembled item 002-010 requires route planning and lifting organization. It is better to inform in advance about the floor, elevator availability, and doorway dimensions. Unexpected manual lifting after cargo arrival creates extra costs and risk of damage.

Samples and project

A finish sample and layout plan may seem like an extra expense, but they protect against a more costly mistake. A table of the wrong size or an incorrect shade is difficult to fix after production.

Budget item What influences What to clarify
Model 002-005 or 002-010 Current price of the selected finish
Species Beech or oak Enamel or visible texture needed
Tabletop 002-010 MDF under enamel or combined construction Edge material, veneer and finish
Finishing Enamel, cherry, walnut with patina, clear coatings Sample, gloss and matching with furniture
Logistics Region, packaging, lifting and openings Box size and delivery conditions

How to buy a coffee or side table Versailles on STAVROS

Start with the function. If you need a high local surface, open card 002-005. If you need a low oval tabletop in front of the sofa — 002-010. Then check the dimensions against the layout, choose beech or oak, and only after that proceed to color.

In card 002-005, check the available options of white enamel, cherry and walnut with patina, the current price and order status. For 002-010, additionally specify the tabletop construction. You cannot leave only "oak, walnut" in the request: the manager needs data on the frame, edge, veneer and finish.

For model selection, you can compare again coffee Versailles 002-005 и magazine Versailles 002-010. Other options are available in the category classic living room tables. The current price and production time should be checked directly before placing an order.

What to tell the manager

Specify the model, wood species, finish, delivery city, floor, elevator availability, and dimensions of complex openings. For 002-010, attach a room plan and sofa data. For 002-005, provide the height of the chair or armrest. If the furniture must match an already purchased Versailles collection, send photos and details of the previous finish.

When a sample is needed

A sample is necessary when there are other painted or stained items nearby. White RAL 9010 may differ in gloss, walnut in saturation, cherry in warmth. Checking on-site is more accurate than on screen.

When a project is needed

A project is useful if the room has several armchairs, a sofa, a console, a mirror, a rug, and complex walkways. It helps to see whether the center is overloaded with 002-010 and whether 002-005 is truly convenient in the local area.

What to check before payment

  • exact model — 002-005 or 002-010;
  • size 690 × 750 × 620 or 1200 × 900 × 450 mm;
  • seat and armrest height of upholstered furniture;
  • table outline on the floor;
  • width of walkways;
  • opening of doors, drawers, and balcony door;
  • frame material — beech or oak;
  • construction of the 002-010 tabletop;
  • color of enamel or tint;
  • presence and color of patina;
  • matching finish with armchairs, console, and mirror;
  • current price;
  • production time;
  • order configuration;
  • type and size of packaging;
  • delivery route for assembled 002-010;
  • delivery and lifting conditions;
  • care recommendations.

How to combine both models in one large living room

In a spacious room, you don't have to choose just one table. Versailles 002-010 can take center stage in front of the sofa, while 002-005 can serve a separate armchair by the window or a library corner. This combination works if there is enough distance between the zones and both models share the same wood species and finish.

One center and one local zone

A coffee table organizes the main sofa group, while a side table organizes a second, more intimate one. Each piece has a clear function. A mistake occurs when 002-005 is placed next to the sofa just for symmetry, even though it's not used, or when two large pieces block walkways.

Unified finish

White enamel on both models creates a cohesive furniture line. Walnut-toned oak also ties the items together but requires matching the shade and patina. If one table is white and the other dark, the contrast must be supported by armchairs, a console, or another large element.

Different finishes within the same collection

Combining different colors is possible, but it's better to keep the same wood species or repeat the finish in other pieces. A single dark table among light furniture looks like a later purchase. A well-thought-out pair repeats the color in a mirror frame, upholstery, or decorative details.

How to use tables without overloading the surface

Versailles 002-005

A compact model is convenient for one tray, a book, and a small decorative item. If you fill the entire tabletop with vases and boxes, there will be no useful space left for a cup. Tall decor between two armchairs can obstruct the view of the person you're talking to.

Versailles 002-010

A wide oval surface allows you to create several zones: a tray closer to the sofa, books in the center, and a decorative composition on the other side. Leave empty spaces between items. This highlights the shape of the tabletop and makes cleaning easier.

Table setting

Use coasters for hot dishes and napkins or coasters for drinks. Wipe up spills immediately. The carved table is designed for everyday use, but the protective coating does not mean the surface can be left wet or that very hot items can be placed on it without protection.

How to check stability after delivery

After unpacking, place the table on a level floor and inspect it from all sides. The legs should rest without wobbling, the tabletop should remain horizontal, and all packaging materials should be completely removed. If the floor has unevenness, first check the furniture on another level surface, rather than immediately trying to file down a leg.

Inspection of the coating

In good side lighting, check the enamel, tinting, patina, tabletop edges, and carving. Record any packaging damage before completely removing the box. For large item 002-010, it is more convenient to inspect from several sides while there is enough space around.

Checking placement

After installation, walk through the main routes again. The actual furniture may seem larger than the tape layout. If the passage becomes tight, it is better to slightly adjust the arrangement of the sofa and armchairs than to constantly bump into the table.

First use

Do not load the tabletop with heavy items immediately after moving it from a cold warehouse or transport. Allow the furniture to acclimate to the room according to the operating instructions. Then use the surface as normal.

Why model comparison is more important than a general recommendation

The advice "for a small room, take a coffee table; for a large one, take a magazine table" is too crude. A small room may have a comfortable sofa area for 002-010, while a spacious study may only need 002-005 next to a single armchair. The decision is determined by the layout, not the total area of the room.

Similarly, you cannot choose only by height. 620 mm is convenient next to a single armchair, but a tabletop of 690 × 750 mm still requires space. 450 mm suits a sofa, but an oval 1200 × 900 mm may block the passage. All three dimensions are considered together.

The material is also not chosen separately from the finish. Beech under white enamel and oak under walnut tint create different items, even if the shape remains the same. For 002-010, the tabletop construction is added to this. That is why the product card becomes the final point of purchase, and the article is a tool for choosing between two scenarios.

How to prepare room photos for consultation

Take photos of the living room from the entrance, from the sofa side, and from the corner opposite the window. The frame should show upholstered furniture, doors, passages, the rug, and neighboring items. Place a tape measure or a sheet with dimensions next to the sofa to make the scale clearer.

Additionally, send a floor plan with wall lengths and distances between furniture. For 002-005, indicate the armchair armrest height; for 002-010, the sofa seat height and the free rectangle in front of it. Such information helps the manager discuss a specific model rather than guess based on the decorative style of the photo.

How to save order data

After agreement, save the model, wood species, color, patina, gloss level, tabletop composition, and finish sample. For 002-010, separately record the material of the edging and veneer. This information will be useful if later you need an armchair, console, mirror, or a second table in the same finish.

Also store photos of the item after receipt and packaging documents. During a move, they will help properly organize re-transportation. For a large assembled model, it is useful to know the route by which it was brought into the room.

How to make a final decision between 002-005 and 002-010

Narrow down the choice to four questions. Where will the table stand: beside the armchair or in front of the sofa? What height is comfortable: 620 or 450 mm? Do you need a local surface or a center for the entire soft seating group? Does the dimension fit without compromising walkways? If the answers consistently lead to one model, finishing becomes the next, not the main, step.

When doubt remains

Make two mockups and live with them one at a time. First, mark 690 × 750 mm and place boxes 620 mm high. Then, lay out 1200 × 900 mm at a height of 450 mm. Try common actions: sit, stand, walk to the window, open a cabinet, set down a tray. A real scenario quickly shows which item is more convenient.

Why you shouldn't choose a larger model "just in case"

A larger surface seems more versatile, but in a living room, extra size takes away walkway space and visually compresses the soft seating area. 002-010 only makes sense when the tabletop is actually used in front of the sofa. For a single cup next to an armchair, the compact 002-005 is more functional.

Why you shouldn't choose a taller table just for serving

A height of 620 mm is convenient beside, but in front of the sofa it can obstruct the view and require awkward arm movement. Serving depends not only on height but also on position relative to the seated person. The low 002-010 may be more comfortable if the item is placed directly in front of the person.

Final specification

After choosing the model, write one order line without ambiguity: article number, size, wood species, finish, patina, tabletop composition, and quantity. Add the delivery city and entry features. Such a specification protects against situations where the buyer and manufacturer understand the phrase "oak table in walnut color" differently.

What to keep after receiving furniture

Do not throw away the specification, finish sample, and packaging data immediately after installation. They will be useful if you later need to select a chair, mirror, console, or a second table in the same finish. For 002-010, keep the description of the tabletop structure; for 002-005, keep the exact wood species and tint option.

Take photos of the table in daylight and evening light, and note where it stood during the walkway check. During future rearrangements, this will help maintain a comfortable distance to the sofa or chairs without starting the selection process over.

How to check the table after a few days

After the first week, reassess the walkways, ease of access, and tabletop usage. Sometimes a large 002-010 looks appropriate in an empty room, but after adding books, a tray, and decor, it starts to obstruct movement. A compact 002-005, on the other hand, may need to be shifted slightly closer to the chair.

Check stability, surface condition, and the absence of marks from hot objects or moisture. Early inspection helps adjust the layout and usage habits before permanent damage appears on the surface.

Frequently asked questions

How is a coffee table different from a side table?

A coffee table is usually taller and more compact, while a side table is lower and wider. In the Versailles collection, this is evident in the dimensions: 002-005 has a height of 620 mm, while 002-010 has a height of 450 mm and a tabletop of 1200 × 900 mm.

Which model to place next to a chair?

The 002-005 is usually more suitable. Its height should be compared to the armrest, and its dimensions of 690 × 750 mm should be compared to the available space to the side.

Which table is better in front of the sofa?

For the central sofa group, 002-010 is intended. It is lower, wider, and has an oval tabletop.

What are the dimensions of Versailles 002-005?

The confirmed size is 690 × 750 × 620 mm. Before purchasing, make a mock-up on the floor and check the height next to the armchair.

What are the dimensions of Versailles 002-010?

The model measures 1200 × 900 × 450 mm. This is a large low table for a spacious soft seating area.

Which table is taller?

Versailles 002-005 is 170 mm higher: 620 mm versus 450 mm for 002-010.

What materials are used for 002-005?

Beech and oak are available in the product card. The choice is linked to the finish: beech is convenient for enamel, oak for tinting with visible texture.

What can the 002-010 countertop be made of?

Under enamel, it can be made of MDF. For transparent finishing, a combined construction is provided: MDF, solid wood edging, and veneer of beech or oak.

What to choose for white enamel — beech or oak?

Beech is often more practical because opaque enamel hides the wood grain. The final configuration is agreed upon in the order.

What to choose for transparent tinting?

Oak provides a more pronounced texture. For 002-010, you need to separately specify the oak frame, edging, and veneer if such a combination is required.

Is the 002-010 supplied assembled?

Yes, the card indicates delivery assembled and painted, in a rigid plywood box.

How to check if the 002-010 will fit through the door?

Measure doorways, elevator, stair turns, and corridor. Clarify the package size and weight before arranging delivery.

Can I order the same finish for the table and chairs?

Yes, such a task needs to be communicated to the manager and agreed upon based on a sample. It is important to choose the same wood species, color, and gloss level.

How can I find out the current price?

The price depends on the model, wood species, and finish. Check the selected line in the product card and request a quote for the specific configuration.

Can I order delivery to another region?

STAVROS ships orders across Russia. The cost and terms depend on the address, dimensions, weight, and chosen shipping method.

Where can I buy a designer coffee table in Moscow?

Orders are placed through the STAVROS website, and questions about samples, payment, and delivery can be clarified with the Moscow office or manager.

Where can I buy a coffee table in Saint Petersburg?

The model can be ordered through the STAVROS product card and details coordinated with the manager. The company's production facility and one of the showrooms are located in Saint Petersburg.

What to buy together with the Versailles table?

For 002-005, an armchair from the same collection is suitable. For both models, you can choose a mirror and a Versailles console, keeping the same wood species and finish.

Can 002-005 be used instead of a coffee table?

Only after checking the height. In front of a low sofa, 620 mm may be uncomfortable and block the view. Usually, 002-005 works better next to an armchair.

Will 002-010 fit in a small living room?

Not always. The 1200 × 900 mm outline needs to be marked on the floor. If after that the passages become tight, it's better to choose a more compact item.

Conclusion: you need to choose not between names, but between two scenarios

Versailles 002-005 and 002-010 belong to the same classic collection but solve different tasks. The coffee table 690 × 750 × 620 mm is suitable for an armchair group, study, and local serving area. The coffee table 1200 × 900 × 450 mm creates a wide low surface in front of the sofa and becomes the center of a spacious living room.

Before ordering, measure the upholstered furniture, mark the dimensions on the floor, check the passages and delivery route. Then choose beech or oak, agree on enamel or tinting, and for 002-010, fix the tabletop design. This order protects against buying a beautiful but inconvenient item.

STAVROS allows you to move from comparison to a specific product card, request the current price, delivery time, and finish sample, as well as select an armchair, console, and mirror from the Versailles collection. A conscious choice between 002-005 and 002-010 helps you get a table that suits not only in style but also in height, area, and the actual living room scenario.