The order said "60 mm leg," but the cabinet is already calculated: how to buy the turned wooden leg MN-023 and not mix up the 45, 60, and 70 mm versions

The chest of drawers body has already been calculated, the plinth has been removed, and wooden supports are to be installed underneath. One short line remains in the specification: “MN-023, 60 mm.” The buyer opens the product page and sees that a single SKU has three versions at once — 45, 60, and 70 mm. At first glance, the difference seems simple: one leg is lower, another is higher.

But with MN-023, it is not only A that changes. For the three versions, the product page shows different combinations of A×B×D: 45×80×58, 60×107×77, and 70×124×90 mm. Therefore, the 70 mm option cannot be considered the same 60-millimeter leg with 10 mm added in height. If the body, lower rail, front, or mounting assembly has already been calculated for a specific version, replacing it requires rechecking the entire geometry against the official drawing.

The correct order before purchasing is: determine the required version of MN-023, write down the full combination A×B×D, check it against the furniture drawing, then choose beech or oak, quantity, finish, and fasteners. Only after that does it make sense to place an order.

If the version is already known, you can buy MN-023 in the product page. If the project is not yet tied to a specific item code, it is more convenient to first buy wooden legs for furniture through the common catalog.

Turned Furniture Leg MN-023

from 10.50 $

Go to Catalog

Turned furniture leg MN-023: which three versions you can buy

The current MN-023 product page presents three versions:

| Version | A, mm | B, mm | D, mm | Beech | Oak | | --- | ---: | ---: | ---: | ---: | ---: | | Small | 45 | 80 | 58 | 870 ₽ | 1 270 ₽ | | Medium | 60 | 107 | 77 | 1 320 ₽ | 2 040 ₽ | | Large | 70 | 124 | 90 | 1 750 ₽ | 3 020 ₽ |

For the selected versions, the product page shows beech or oak, Prestige sanding, re-gluing "Under enamel", availability in Saint Petersburg, and if available, shipment from the warehouse within three business days, while for made-to-order production, the average lead time is 5–10 days.

In the order, it is better to write not "MN-023 60 mm", but:

MN-023 / 60×107×77 mm / beech or oak / Prestige / Under enamel / quantity ___ pcs.

So the furniture maker, the buyer, and the manager all end up with the same specific version.

Watch video ...

Wooden leg MN-023 45, 60, or 70 mm: why you can't look at A alone

The most important feature of MN-023 is that the three versions change across several parameters at once.

Our factory also produces:

Turned Furniture Leg MN-145

from 6.52 $

Carved Furniture Leg MN-144

from 37.90 $

Geometric Furniture Leg MN-139

from 130.96 $

Geometric furniture leg MN-140

from 219.55 $

Precision Furniture Leg MN-143

from 237.66 $

Turned leg with decoration MN-145.1

from 10.86 $

MN-147 Carved Furniture Leg

from 28.36 $

Precision Furniture Leg MN-233

from 28.73 $

View Full Product Catalog

Transition from 45 to 60 mm

A increases by 15 mm, B by 27 mm, D by 19 mm.

Transition from 60 to 70 mm

A increases by only 10 mm, but at the same time B by 17 mm, D by 13 mm.

Transition from 45 to 70 mm

The difference in A is 25 mm, in B 44 mm, in D 32 mm.

Therefore the phrase:

"We're 10 mm short on height, let's just take MN-023 70 instead of 60"

insufficient for purchase.

First, open the drawing of the 70 mm version and check whether the changed geometry fits the already calculated lower part of the furniture.

Which wooden furniture legs to buy if the cabinet is already calculated

If the cabinet, chest, or wardrobe body already exists in the working drawing, MN-023 should be selected based on the project, not on the product photo.

Procedure:

1. record the current cabinet height;
2. determine which leg version was included in the original project;
3. open the official drawing for that specific version;
4. transfer A×B×D into the specification;
5. check the geometry of the lower part of the cabinet;
6. check the design mounting assembly;
7. confirm the quantity;
8. only after that choose the material and place the order.

If the source project says "MN-023 60", and the buyer sees 45 and 70 mm also in stock, these are not three interchangeable lines. These are three different versions of the same product code.

Version 45×80×58 mm: when it can be left in the project

Small MN-023 costs:

• beech — 870 ₽;
• oak — 1,270 ₽.

If the project was originally designed specifically for 45×80×58 mm, there is no point in switching it to 60 or 70 mm just because the larger leg looks visually more striking in a photo.

For four supports, the cost of the items themselves:

Beech

4 × 870 = 3 480 ₽.

Oak

4 × 1 270 = 5 080 ₽.

These figures do not include fasteners, finishing, and delivery.

Version 60×107×77 mm: medium MN-023 as a separate specification

The 60×107×77 mm version costs:

• beech — 1,320 ₽;
• oak — 2,040 ₽.

For four:

Beech

4 × 1 320 = 5 280 ₽.

Oak

4 × 2 040 = 8 160 ₽.

If this exact version was used in the carcass, the entire geometry must be preserved in the order.

Line:

MN-023 / 60×107×77

more reliable than:

60 mm leg.

Especially when the purchase is made by someone who was not involved in the furniture design.

Version 70×124×90 mm: why the extra 10 mm require recalculation

The large MN-023 costs:

• beech — 1,750 ₽;
• oak — 3,020 ₽.

For four:

Beech

4 × 1 750 = 7 000 ₽.

Oak

4 × 3 020 = 12 080 ₽.

Compared to the 60 mm version, the surcharge for four beech legs is 1,720 ₽, and for four oak legs it is 3,920 ₽.

But budget is not the main risk. The main risk is that along with A, B and D change as well. Therefore, increasing the total height of the furniture by 10 mm cannot be purchased with a single checkbox without checking the drawing.

How much does a set of four MN-023 in all three sizes cost?

| Version | 4 pcs., beech | 4 pcs., oak | | --- | ---: | ---: | | 45×80×58 | 3,480 ₽ | 5,080 ₽ | | 60×107×77 | 5,280 ₽ | 8,160 ₽ | | 70×124×90 | 7,000 ₽ | 12,080 ₽ |

Moving from 45 to 60 mm increases the cost of four beech items by 1,800 ₽, and oak items by 3,080 ₽.

Moving from 45 to 70 mm:

• beech — +3,520 ₽;
• oak — +7,000 ₽.

These calculations are useful after the geometry has already been confirmed. Price should not become a reason for arbitrarily replacing one version with another.

MN-023 in beech or oak: the material is chosen after the geometry

Beech and oak are available in all three size options.

The choice of material does not correct an incorrect size.

If the body is designed for 60×107×77, the oak version has the same size combination as the beech one. Therefore, the geometry is confirmed first, then the wood species.

Price difference per leg:

• 45 mm — 400 ₽;
• 60 mm — 720 ₽;
• 70 mm — 1,270 ₽.

For four 70 mm supports, the difference between oak and beech is 5,080 ₽.

The material affects the budget, but does not replace checking the configuration.

What does MN-023 "Under enamel" mean

For the selected configuration, the card shows the re-gluing "Under enamel".

This is the preparation of a wooden product for subsequent opaque coating.

This should not be read as:

"the leg is already painted".

The final finishing remains a separate stage.

If the chest of drawers body is already painted, it is useful to add the color code, sample, primer type, enamel, gloss level, and contractor to the MN-023 specification.

What to do if the body is already painted and the legs are purchased later

In this scenario, the actual color of the body is more important than the old record of "white" or "gray".

Before painting MN-023, it is useful to compare a test paint sample directly with the finished furniture.

They check the shade, gloss, perception under daytime and evening lighting, and combination with handles and plinth.

If the project is a series, it is better to keep one approved finish sample until the entire batch is completed.

Wooden support MN-023 and fasteners: what to clarify before payment

The MN-023 product page does not provide enough grounds to assign one specific fastening SKU for any cabinet in the article.

Fasteners depend on the furniture design.

Before purchase, the furniture maker must confirm:

• what the bottom is made of;
• whether there is reinforcement at the installation point;
• how the load will be transferred;
• whether a mounting plate is needed;
• whether a stud is used;
• whether a base plate is needed;
• who is responsible for selecting the hardware.

If the components have not yet been selected, you can open the section Furniture leg hardware, but the specific layout must be coordinated with the project.

Why you cannot buy hardware "by leg diameter"

MN-023 has B and D in its product page, but you cannot independently declare one of these values as the diameter of the mounting area or the size of the mounting plate without a drawing.

First you need the branded product drawing, then the actual cabinet, then the specific hardware.

Buying hardware "roughly for a 60-millimeter leg" creates a second source of error after the incorrect size of the support itself.

Buying legs for a chest of drawers: when MN-023 actually suits the project

MN-023 has only three standard configurations:

• 45×80×58;
• 60×107×77;
• 70×124×90 mm.

If one of them fits the project, you can continue working with this model.

If the project requires a different size or different geometry, you shouldn't force the body to fit MN-023.

Then it's more useful to buy legs for a dresser in a separate selection and choose another standard model.

This is a normal anti-CTA: a specific product isn't suitable for every project.

If the furniture is placed flush against the wall: we check not only the front legs

For a chest of drawers, it seems natural to check one front corner and repeat the solution four times.

But the rear part of the body may differ.

There may be a baseboard, back panel, reinforcement, cable outlet, or another structural element nearby.

Therefore, all leg positions must either be confirmed as symmetrical on the drawing or verified separately.

If you need to buy four MN-023: the quantity is first confirmed by the designer

Four legs is a common scenario, but not a universal rule.

The product page has no rule:

any dresser = four MN-023.

The quantity is determined by the furniture design.

If the project already includes four support points, the calculations above apply. If there is a central additional support or a different base scheme, the quantity changes.

In the order, it is better to write:

quantity per project: 4 pcs.

Ordering MN-023 as a set: what should be in the specification

Practical template:

SKU: MN-023
Size: 60×107×77 mm
Material: beech
Quantity: 4 pcs.
Sanding: Prestige
Lamination: For enamel
Finish: ___
Fastening: confirm against the body drawing
Glide: to be confirmed
Delivery city: ___
Required date: ___

For the 45 or 70 mm version, the entire dimension string changes, not just the first number.

This is acceptable turned furniture leg MN-023 order without the ambiguous “60 mm.”

How to check the invoice before paying MN-023

| Parameter | What to verify | | --- | --- | | SKU | MN-023 | | Size | 45×80×58 / 60×107×77 / 70×124×90 | | Material | beech / oak | | Sanding | Prestige | | Preparation | For enamel | | Quantity | per project | | Lead time | in stock / made to order |

If the invoice lists only “MN-023, 4 pcs.” without the selected geometry, it is better to confirm the specification before payment.

If the project specifies 60 mm, but only 70 mm remains in stock

You cannot automatically agree to a substitution.

You need to:

1. open the drawing 70×124×90;
2. compare it with the original 60×107×77;
3. check the lower part of the cabinet;
4. check the fasteners;
5. recalculate the final height of the furniture;
6. obtain confirmation from the designer.

Only after that can the 70 mm version serve as a replacement.

If the check fails, it is wiser to wait for the required version or choose a different SKU.

If the project only contains the entry “60 mm leg” but no SKU

First, the original model must be restored.

60 mm is not a unique identifier for a leg. Different products may have completely different geometry and fastening.

Therefore, the lost SKU MN-023 cannot be substituted just because it also has A=60.

The original specification, drawing, or confirmation from the furniture maker is required.

Acceptance of the MN-023 batch before painting

If four, eight, or more legs are ordered, the product parameters are checked first, rather than sending everything straight to the paint shop.

Need to verify:

• SKU MN-023;
• the same version A×B×D;
• material of the entire batch;
• quantity;
• sanding;
• the surface condition;
• absence of transport damage.

If 60×107×77 and 70×124×90 are accidentally mixed in one batch, the error will not disappear after opaque painting. It is better to detect it before the final finishing.

If part of the batch has arrived now and part will arrive later

Suppose 20 legs are needed for serial furniture, and 12 were received in the first delivery.

Before starting painting, it is better to record the exact batch line:

MN-023 / 60×107×77 / beech / Prestige / For enamel.

It is exactly this one that is repeated for a reorder.

When the second part arrives, the size and material are checked again. This protects against a situation where the first batch was 60 mm, and in the second the purchaser accidentally chose 70 mm, relying only on the same SKU MN-023.

Serial furniture: how to scale MN-023 without repeating the mistake

Let's imagine ten identical chests of drawers, each with four legs.

Total:

10 × 4 = 40 MN-023.

If the beech version 60×107×77 is approved:

40 × 1 320 = 52 800 ₽.

If the oak version:

40 × 2 040 = 81 600 ₽.

The difference is 28,800 ₽.

But for a serial order, geometric discipline is even more important. First, one reference carcass with a specific MN-023 is approved, then the same specification line is scaled across the entire batch.

Control card for version MN-023 for the workshop

For a series, it is convenient to make one short table:

| Parameter | Approved value | | --- | --- | | SKU | MN-023 | | A×B×D | ___ | | Material | ___ | | Sanding | Prestige | | Preparation | For enamel | | Finish | ___ | | Fasteners | ___ | | Quantity per item | ___ | | Drawing revision | ___ |

Such a card is more useful than the phrase “we use the standard MN-023.” It eliminates interpretation of the SKU without a size.

How to document a version change in an already approved project

If the designer changes 60 mm to 70 mm, it is better not to erase the old line without a trace.

Useful to note:

MN-023 60×107×77 — cancelled.

Replaced with MN-023 70×124×90 after rechecking the cabinet, drawing revision No.___

This way, the purchaser does not work from the old PDF, and the furniture maker does not receive two different versions of the order in the messenger.

If the furniture cabinet changed after the order

Sometimes the legs have already been selected, but then the lower rail, bottom thickness, or another base element changes.

In this case, the old note “MN-023 approved” is no longer considered sufficient.

You need to reopen the drawing of the selected version and check:

• the new position of the cabinet;
• the actual installation location;
• fastening unit;
• final height of the furniture;
• no conflict with the skirting board or other details.

Changing the carcass turns an old approval into an outdated project revision.

Reordering MN-023 a few months later: what cannot be restored from memory

If one leg is damaged or a second identical chest of drawers is being started, you should not order “the same MN-023” based only on a photo of the finished furniture.

You need to pull up the original line:

MN-023 / A×B×D / material / Prestige / For enamel / finish.

Size is especially critical: all three versions belong to the same item code.

If the documentation has been preserved, reordering becomes a simple operation. If not, the specific version will have to be identified again from the drawing and the actual part.

If one spare leg is needed for a future replacement

The spare must also be specific.

Not:

MN-023 — 1 spare.

But:

MN-023 / 60×107×77 / beech / Prestige / For enamel — 1 spare.

If the spare part is planned to be stored unpainted, information about the body finish must also be kept. After a few years, a single article number will not be enough to accurately restore the appearance.

## If the project is approved at 60 mm, but procurement is handed over to another person Handing a project over between the designer, the engineer, and the purchaser is another place where precise execution gets lost. The correspondence may retain only “MN-023 60,” even though the working drawing contains the full geometry of 60×107×77 mm. Therefore, along with the specification, it is useful to pass along the drawing page where the specific version was selected. The purchaser should receive not a verbal instruction to “take the middle one,” but an unambiguous line: > MN-023 / 60×107×77 / beech / Prestige / For enamel. If a different size is selected in the product card, it is not substituted automatically even at a better price or with a faster lead time. Any change is returned to the engineer for review. ## Inspection after installing the first leg If the furniture is being assembled for the first time, it is reasonable not to install the entire set without an intermediate check. After mounting the first MN-023, check whether the actual position matches the working drawing, whether the lower overall dimension of the body has changed, and whether the fastening assembly works correctly. Only after confirming the first point should the scheme be repeated at the remaining positions. Such a check is especially useful if the body was made by another workshop or the actual furniture already differs slightly from the original project. ## Non-standard height: what to do if 45, 60, and 70 mm do not fit

For a single chest of drawers or a small batch, the simplest path is to look for another standard model in the catalog.

If the project is a series production, the situation is different.

STAVROS indicates the possibility of changing the product size for batch orders. But this should not be interpreted as a promise to make a single non-standard MN-023.

Therefore, two scenarios:

1–4 pcs

First look at other standard supports.

Serial order

Confirm with the manufacturer the possibility of batch production in the required size, cost, and lead time.

Until written confirmation, non-standard geometry cannot be entered into the production drawing as already available.

When MN-023 does not need to be purchased yet

It is better to stop the order if:

• the specification only states “leg 60 mm”;
• B and D have not been verified;
• the branded drawing is not open;
• the case has already changed since the original design;
• fasteners are selected by eye;
• the material has not yet been approved;
• the finish is unknown;
• the 70 mm version is considered a simple replacement for the 60 mm one;
• the number of supports has not been confirmed by the design.

Pausing at this stage is cheaper than reworking a finished cabinet.

Mistakes when ordering MN-023

Mistake: choosing by A only.
In three versions, B and D change at the same time.

Mistake: treating 70 mm as the same 60 mm leg with an added 10 mm.
The full geometry is different.

Mistake: ordering “MN-023 — 4 pcs.” without a size.
One item code has three versions.

Error: choosing fasteners from a photograph.
The mounting assembly depends on the cabinet and the drawing.

Error: switching beech to oak to solve a size problem.
The geometry does not change.

Error: promising a non-standard size for a single piece.
The possibility of size changes applies to batch orders and requires confirmation.

Where to buy wooden furniture legs and MN-023 separately

If the project is not yet tied to one model, you can Buy wooden furniture legs in the general category.

If you need a support specifically for a chest of drawers, wardrobe, or cabinet — use the section buy legs for a dresser.

If MN-023 has already passed project review — go directly to the product page turned furniture leg MN-023.

Questions before buying MN-023

What sizes does MN-023 come in?

45×80×58, 60×107×77 and 70×124×90 mm.

Can MN-023 60 mm be replaced with 70 mm without recalculating the furniture?

It's not advisable. Not only A changes, but also B/D.

Is MN-023 available in beech?

Yes.

Is it available in oak?

Yes.

What sanding is specified?

"Prestige".

What does "under enamel" mean?

Preparation for subsequent opaque coating, not a finished paint job.

How much does MN-023 45 mm in beech cost?

870 ₽ at the time of checking.

How much does MN-023 60 mm in oak cost?

2 040 ₽.

How much does MN-023 70 mm in oak cost?

3 020 ₽.

Is MN-023 in stock?

The verified product page shows availability in Saint Petersburg for three variants.

How quickly is the item shipped when in stock?

The product page indicates shipment from the warehouse within three business days.

How long does made-to-order production take?

The average time is 5–10 days.

Can I order a non-standard size?

STAVROS indicates the possibility of size changes for bulk orders; the specific possibility, price, and lead time must be confirmed separately.

Where can I buy MN-023?

On the product page for the turned furniture leg MN-023 by STAVROS.