The reception desk is already assembled from black metal and smoked glass: why first order a wooden baguette K-093 100×17×300 mm, rather than buying a two-meter 'crocodile' molding

The reception desk is already in the room. The black metal frame sets strict graphics, smoky glass softens reflections, the light is on, and the decor exists only in the visualization for now. At this point, you want to immediately order a two-meter wooden baguette K-093 and finish the project. But the expressive texture, reminiscent of crocodile skin, is exactly the material that cannot be reliably assessed from a photo alone.
It is more practical to first buy wooden baguette K-093 measuring 100×17×300 mm. The short element can be applied to the real desk, coated with the chosen finish, viewed in the morning and evening, let the client touch the relief, and only then approve the two-meter carved linear molding. This is not a free promotional sample, but a full-fledged option of a specific product. Its price becomes the cost of verifying the solution before a large order.
Short answer: for a reception desk made of metal and glass, the 300-mm K-093 should be ordered first if the shade, gloss level, direction of the decorative stripe, and texture scale have not yet been approved. Buying two-meter strips right away is reasonable only when the designer has already worked with this article, there is an approved physical color sample, and the entire layout is clear.

Wooden Molding K-093

from 44.40 $

Go to Catalog

Wooden baguette K-093: what exactly is sold in the listing

K-093 is not an ordinary slat or a picture frame molding. It is an interior decorative wooden linear molding with an active relief. The manufacturer describes the pattern as an imitation of crocodile skin and directly lists furniture, interior structures, bars, and reception desks among its applications. The listing also allows combination with glass and metal — so the chosen scenario is based on the product's purpose, not invented for an unusual headline.
The profile has a thickness of 17 mm. Three size options are available in the card:

• 100×17×300 mm;

• 100×17×2000 mm;

• 200×17×2000 mm.

The main limitation is already visible in this list: the short fragment is only offered at a width of 100 mm. By ordering it, you can check the texture, wood species, preparation quality, and coating. But it cannot be claimed that it fully shows the impression of a 200 mm wide strip. The 200-millimeter decor occupies twice the strip of the facade and has a stronger effect on the proportions of the stile.
Beech and oak are offered as materials, and Standard and Prestige as preparation levels. On the page, you can select the "under enamel" option. At the time of checking, all configurations were available for order with a lead time of 5–10 working days. This is the time shown in the card, not a promise of a completion date for a specific project: it should be confirmed when placing the order.
If you need a different pattern or a different scale, it makes sense to first open the section and buy wooden baguette for furniture and interiors, comparing several profiles. The category page is important because the word "baguette" in search often leads to picture frames, whereas here you need decorative wooden molding for the object.

Watch video ...

Why the carved molding "crocodile" cannot be chosen only by screen

A photograph conveys the pattern, but poorly conveys its real depth, scale, and behavior under side lighting. On a monitor, the texture may look uniform. On a stand, each protrusion creates a shadow, and nearby metal and glass surfaces add reflections. The more directional the light, the more contrast the relief becomes.
There are four reasons to see K-093 in person.
The first is scale. A strip 100 mm wide on a facade 1100 mm high is perceived differently than a large fragment on a screen. If a thin metal profile runs nearby, the wooden decor can become the main visual element, even though it was considered secondary in the visualization.
The second is color. Black metal is rarely just "black": it can be matte, moiré, graphite, or have a cool bluish undertone. Smoked glass can also be neutral, bronze, or gray. The same wood finish next to them looks warmer or cooler.
The third is gloss. Glossy enamel enhances reflections on the peaks of the relief. Matte makes the pattern calmer. Semi-matte finish occupies an intermediate position, but the exact result depends on the coating system and surface preparation.
The fourth is distance. An employee behind the stand sees the decor up close and from above, a visitor sees it from several meters away and at eye level. What looks elegant from a distance of 40 cm can turn into a contrasting stripe from three meters. Therefore, the sample is examined from both working points.

Our factory also produces:

Exhibition stand SV-005

from 255.08 $

Exhibition stand SV-004

from 249.47 $

Round Wooden Baluster L-118

from 49.16 $

Turned leg with decoration MN-148

from 16.47 $

Mirror frame RM-026

from 1,078.27 $

Decorative leg MN-149

from 17.93 $

Furniture handle Jupiter HL-064M

from 18.18 $

Sample Set of Moldings OMLD-005

from 65.87 $

View Full Product Catalog

What can be checked on a K-093 fragment 300 mm long

A short element is useful if you turn it into a working mock-up, not just hold it in your hands. It is applied to the place where the decor should go, temporarily fixed in a way that is safe for surfaces, and photographed from the main traffic routes.
On the fragment you can check:

1. Compatibility of the relief with the geometry of the metal frame.

2. The shade of wood or enamel next to smoked glass.

3. Visibility of shadows under daylight, general, and accent lighting.

4. Tactility in the area that visitors touch.

5. How easily the selected sample finish is cleaned.

6. Sufficiency of the 100 mm width for a decorative strip.

7. Visual protrusion of the 17 mm thick profile relative to adjacent parts.

8. The client's reaction not to the visualization, but to the physical material.

9. Whether beech is suitable under an opaque enamel or if oak with visible texture is needed.

10. Whether an active "crocodile" texture is needed at all, or a calm molding is enough for the stand.

If the project requires not one specific K-093, but a preview of a group of patterns, you can to order samples of carved moldingHowever, the sample set and the product fragment solve different tasks: the former helps compare the assortment, while the latter allows making a color swatch and a full-scale fitting of the specifically selected article in the 300 mm size.

What a short wooden baguette does not prove

Three hundred millimeters do not replace a working drawing and the layout of the entire rack. The sample does not answer how many two-meter strips will be needed, where the joints will be, and how the pattern will continue at the corners. It also does not show the possible perception of the K-093 strip with a width of 200 mm.
Based on a short fragment, it is impossible to automatically confirm:

• the match of the pattern at all future joints;

• the suitability of the selected fastening for the base of the rack;

• the straightness and condition of each received two-meter piece;

• the final consumption taking into account trimming;

• fire and operational requirements of a specific public space;

• the admissibility of installation flush with the edge of the glass;

• finishing technology for the entire batch without coordination with the contractor.

A full-scale sample reduces design risk but does not become an engineering conclusion. Fastening to metal, wood panels, stone, or another base is designed considering the actual substrate. Near glass, gaps must be checked in advance and load transfer to the edge must be excluded.

Carved wooden molding 100 or 200 mm wide: different roles on a reception desk

The choice between 100 and 200 mm cannot be reduced to the phrase "wider looks more expensive." The strips have different compositional roles.
K-093, 100 mm wide, can work as a frieze, belt, or vertical insert. It leaves the main surfaces of the reception desk visible and connects wood with thin metal lines. This width can be checked with a short product sample.
K-093, 200 mm wide, becomes an independent panel. It occupies a noticeable part of the facade, creates a large tactile area, and requires more free space around it. On a small desk, such a strip may compete with the logo, lighting, baseboard, and glass pattern.
For the choice, it is useful to make two paper or cardboard templates 100 and 200 mm wide at the full length of the future strip. A real fragment is applied to the 100 mm template. The 200 mm template shows the occupied area but does not imitate the actual relief. If the wide version remains a candidate, its solution must be separately approved based on the drawing, photographs, and, if possible, physical material.

Beech or oak: which wooden decor to order for the chosen finish

If the desk is to receive a dense opaque color, the buyer often considers beech. But the decision is made not by a general rule, but by the specific finishing system, budget, and desired surface quality. For transparent or semi-transparent tinting, oak may be more interesting, since the task is not only about the relief but also about the visible wood structure.
The card offers both wood species and two preparation levels — Standard and Prestige. To avoid replacing the manufacturer's requirements with household advice, before choosing, one should check the materials and quality of the wooden decor, then coordinate the primer, enamel, stain, varnish, and interlayer treatment with the finisher.
The practical test is done as follows:

1. Divide the back or a specially designated test surface of the fragment into zones.

2. Prepare each zone according to the approved technology.

3. Apply not one random color, but two or three final candidates.

4. Wait for the coating to fully form.

5. Write down the recipe and the number of layers.

6. Look at the sample next to metal and glass.

7. Approve the option in writing and photograph it under the same light.

You cannot compare a wet first coat with a finished metallic coating: after drying, the shade and gloss change. You also cannot consider one small stroke as a reliable sample of the entire relief — valleys and peaks receive different amounts of material.

Standard or Prestige: what the K-093 buyer pays for

Quality names should not be interpreted as "bad" and "good." These are different levels of preparation, and the choice should match the finish and project requirements. Covering enamel, transparent finish, and close surface inspection impose different requirements.
Before ordering, three questions are asked:

• what result should be visible after coating;

• who performs the final preparation;

• what surface is considered acceptable per the contract and sample.

If the reception desk is premium, the visitor approaches it closely, and the decor is lit by grazing light, saving on preparation may prove false. But automatically overpaying for Prestige is also not worth it: first, you need to understand the finish technology. A product sample allows the finisher to assess the real scope of preparation and give not an abstract but a concrete recommendation.

How much it costs to check K-093 before ordering a two-meter baguette

As of 31.08.2026, prices for the short K-093 100×17×300 mm were:

• beech Standard — 3,640 RUB;

• beech Prestige — 4,080 RUB;

• oak Standard — 4,400 RUB;

• oak Prestige — 4,870 RUB.

If rigid packaging in a frame is chosen for the order at 390 RUB, the amounts will be 4,030, 4,470, 4,790, and 5,260 RUB respectively, excluding delivery and finishing.
For comparison, a two-meter K-093 with a width of 100 mm cost from 24,240 to 32,460 RUB per piece depending on the wood species and quality. The 200 mm version — from 44,640 to 56,910 RUB. Therefore, a short sample is not a symbolic purchase, but its price is noticeably lower than the cost of one full plank, let alone a batch.
A sample should be considered beneficial not by the formula "it will definitely pay off," but through the risk it prevents. If after trying it out the customer rejects too active a texture, a few thousand rubles saved the budget of the full order and rework. If K-093 is approved, the sample becomes the standard of color and quality for the finisher.
Prices are a snapshot of the product card as of the check date. Before payment, you need to reopen the item and verify the configuration: width, length, wood species, quality, packaging, lead time, and the final amount.

How to try on furniture molding against black metal and smoky glass

Proper fitting takes more than five minutes. First, clean the stand and turn on all permanent lighting. Then mark the intended K-093 line with painter's tape that does not damage the finish. Place the fragment without dangerous pressure on the glass and take a series of photos.
At least four modes are checked:

• daylight with open curtains;

• daylight without direct sun;

• evening general lighting;

• work lighting for the counter and logo.

After that, the decor is viewed from the entrance, from the queue, right at the counter, and from the employee's side. If there is a screen nearby, reflections are checked with the screen on as well. If the relief becomes overly contrasty, first the gloss level and light direction are changed, rather than immediately abandoning the profile.
It is important to also assess neighboring lines. The top edge of K-093 should not accidentally align with the logo edge or split the inscription. The bottom strip should not look like a continuation of the plinth if that effect was not intended. The vertical insert should be tied to the facade module, not placed "approximately in the center."
If there are many elements — decor, lighting, logo, facade finishes, and walkways — it is useful to order the development of a design project. For a single strip, a drawing may seem excessive, but the reception desk is the first point of contact between a visitor and the interior, so conflicts between several accents are clearly visible.

When the "crocodile" texture overloads the reception desk

K-093 was chosen for its character, but not every object needs such an active surface. The profile should be abandoned or its area reduced if:

• the facade already has a large logo and contrasting lighting;

• the tinted glass has a pronounced pattern or gradient;

• the metal frame itself forms a frequent grid;

• the decor is located in an area of constant impacts from bags and suitcases;

• the relief interferes with regular cleaning according to the object's requirements;

• the 200 mm strip visually reduces the facade;

• the client wants a calm minimalist look, not an ethnic accent.

Instead of mechanically reducing K-093, sometimes it is better to choose a different profile. You can compare wooden baguette K-091 by pattern, dimensions, price, and available configurations. If you need not a carved ornament but a calm profiled line, it is worth separately buy wooden molding MLD-017 for physical comparison. These products cannot be considered interchangeable just because they are all long-length wooden decor.

How to turn a 300-millimeter sample into a reference for ordering

After approval, the fragment should be kept, not mounted first on the stand. On its back side or in the accompanying sheet, record:

• article K-093;

• size 100×17×300 mm;

• wood species;

• quality Standard or Prestige;

• priming and coating system;

• color code;

• gloss level;

• number of layers;

• approval date;

• name of the person who approved the decision;

• photos under control lighting.

The reference is handed to the finisher along with the new slats. Comparison is made not only by color at the tops of the relief, but also by the filling of the recesses. With opaque finishing, an excessive layer can soften the pattern, while an insufficient one can leave unevenness. The exact technique is determined by the chosen materials and the specialist.

How to calculate an order for two-meter carved molding

After approving the appearance, measure not the overall width of the post, but each actual decorative line. A separate list is made for horizontal and vertical sections. It specifies the finished length, end type, angle, joint position, and facade module number.
Basic formula for straight sections:
number of slats = rounding up (total requirement with technological allowance / 2000 mm)
But you cannot mechanically add up all the pieces. The remainder from one part can be used on another section only when the pattern direction, visible ends, and joint requirements match. The size of the allowance is set by the contractor after the cutting plan. Universal 5 or 10 percent does not replace a parts map.
Before payment, request or download the DWG drawing K-093 and provide it to the designer. The card should not be perceived as a promise of cutting to finished size. If cutting service is needed, its availability, tolerances, ends, and packaging are agreed separately before ordering.

Installation of wooden molding on a finished post

The most dangerous thought is "it's just a decorative trim, we'll glue it with any adhesive." A finished stand already has finished surfaces, metal, glass, electrical wiring, and possibly a contractor's warranty. An unsuitable compound can damage the coating, show through at the edges, or fail to hold the massive relief.
Before installation, determine:

1. Exact base material for K-093.

2. Condition and compatibility of the finish coating.

3. Weight and length of each element being installed.

4. Permissible method of fixation according to the stand design.

5. Need for mechanical fasteners or temporary clamping.

6. Safe clearance to the glass.

7. Position of wiring and backlighting.

8. Order of finishing edges and joints.

9. Possibility of dismantling without damaging the facade.

Before starting work, it is worth study tips on finishing and installation, and the final technology should be agreed with the rack manufacturer, finisher, and installer. The article does not prescribe a universal adhesive brand: different substrates require different solutions.

When you can immediately order a two-meter wooden baguette

Purchasing a short fragment is useful but not mandatory in every project. You can proceed directly to full length if the following conditions are met simultaneously:

• K-093 has already been used by the designer on a comparable project;

• there is a physical reference sample of this exact article;

• the wood species, quality, and finish are approved;

• the width of 100 or 200 mm has been verified with a full-size template;

• the layout with joints is ready;

• the substrate and fastening are agreed upon;

• the client saw the material under similar lighting;

• the timeline does not allow for two consecutive orders, and the risk is consciously accepted.

If at least color, gloss, or scale remain a matter of dispute, the short K-093 is cheaper to use as a decision point.

When buying K-093 is premature

The order should be postponed if the stand exists only in a sketch and dimensions are still changing; the wood species and finish are unknown; the placement area is not selected; there is no access to real samples of metal and glass; the decor is being attached to an unknown coating; the buyer considers the 300 mm sample as a version of the 200 mm one; high-contact zones are not defined; there is no cutting layout.
A separate stop signal is the request to "make it like in the picture" without an approved color. The image on the screen depends on the camera and display. A commercial order must rely on a marked physical swatch and a written specification.

Mistakes when buying a carved baguette for the reception desk

1. Ordering the entire batch based on a single catalog image.

2. Searching for a picture frame baguette and comparing it with the interior K-093.

3. Not noticing that the 300 mm variant has a width of 100 mm.

4. Transfer the impression from 100 mm to a 200 mm strip without a template.

5. Choose oak, and then completely cover it with a covering system without discussing the meaning and budget.

6. Consider Prestige mandatory for any finish or Standard obviously insufficient.

7. Confirm the color before the coating is completely dry.

8. Look at the sample only in daylight.

9. Do not check reflections in smoked glass.

10. Place the relief where visitors constantly touch it.

11. Consider all two-meter remnants interchangeable without considering the pattern.

12. Assign adhesive without checking the substrate.

13. Mount the decor flush to the edge of the glass.

14. Order the linear molding before approving the logo and lighting.

15. Do not save the approved fragment as a batch reference.

How to buy wooden molding K-093 without expensive rework

The working algorithm looks like this:

1. Check the product card and select K-093 100×17×300 mm in the required wood species and quality.

2. Re-verify the current price, lead time, and packaging.

3. Receive a short element and inspect it before finishing.

4. Prepare two full-size templates with widths of 100 and 200 mm.

5. Create color sample options according to the approved technology.

6. Try the fragment against black metal and smoked glass.

7. Check the daylight, evening, and accent lighting.

8. Approve the width, color, gloss, and placement.

9. Save the sample as a marked reference.

10. Prepare a map of sections and cutting of two-meter slats.

11. Coordinate the base, fastening, ends, and joints.

12. Reopen the card and process the full batch.

13. Before payment check payment and delivery terms, especially for two-meter linear moldings.

14. Upon receipt, verify the article, size, wood species, quality, quantity, and packaging condition.

Thus, the buyer moves not from a beautiful picture to an expensive batch, but from a verified physical solution to the specification.

Frequently asked questions about the wooden baguette K-093

Can K-093 be considered a furniture baguette?

Yes. The card allows use on furniture and interior structures. In the selected scenario, it is used as decorative molding on a reception desk.

What pattern does K-093 have?

The manufacturer describes the texture as an imitation of crocodile skin. Actual perception depends on the coating, light, and distance.

What sizes are available?

As of the check date: 100×17×300 mm, 100×17×2000 mm, and 200×17×2000 mm.

Is there a short K-093 with a width of 200 mm?

In the verified card, the short 300 mm option is specified for a width of 100 mm. The 200 mm wide version is shown with a length of 2000 mm.

Why buy 300 mm if you need a two-meter molding?

To check the actual texture, color, gloss, and combination with metal and glass before ordering a more expensive batch.

Can the short element be used as a free sample?

No. This is a separate paid product configuration with its own price. After approval, it is reasonable to save it as a reference.

What to choose under enamel — beech or oak?

There is no universal answer. You need to consider the system's coverage, surface requirements, budget, and finisher recommendations. For transparent finishes, additionally evaluate the wood grain pattern itself.

How does Standard differ from Prestige?

These are preparation quality options specified by the manufacturer. The specific choice is linked to the future coating and requirements for the visible surface, not just the price.

Will K-093 work with black metal?

The card allows combination with metal. But the shade of black, gloss level, and texture need to be checked on the project's actual materials.

Will it work with smoked glass?

The card allows combination with glass. It is necessary to check reflections, the glass tint, and safe installation near its edge.

Can a width of 200 mm be assessed from a 100 mm fragment?

The pattern and finish can be assessed, but the scale cannot be fully evaluated. For the area, a 200 mm template is made, and the final decision is made separately.

How much does a short K-093 cost?

As of 31.08.2026 — from 3,640 to 4,870 RUB depending on breed and quality, excluding delivery and finishing. The price changes, so it is checked before ordering.

Is rigid packaging needed?

The card offers a frame for an additional fee of 390 RUB. The need should be assessed considering the delivery method and confirmed during checkout.

How to calculate the number of two-meter slats?

According to the list of all sections and the cutting map, taking into account the pattern direction, joints, corners, and technological allowance. Dividing the total footage by two without layout is insufficient.

Can the baguette be glued with universal adhesive?

The composition cannot be assigned without knowing the base. The fixing method is coordinated with the stand manufacturer and installer, considering the finish, part weight, and proximity to glass.

When is it better not to buy K-093?

When the active relief conflicts with the logo and lighting, falls into the impact zone, does not meet cleaning requirements, or has not passed a full-scale fitting.

Bottom line: first approve the texture, then order the linear molding

The wooden baguette K-093 can connect cold metal and smoky glass with warm material, but its expressiveness is both an advantage and a risk. The "crocodile" texture heavily depends on scale, coating, and light. Therefore, the short version 100×17×300 mm has a clear commercial role: it allows a decision to be made on a finished stand before purchasing two-meter slats.
The sample does not replace the drawing, calculation, mounting approval, or verification of the 200 mm wide version. But it answers the client's main human question: whether this material is liked right here, not in a photo. If the answer is positive, the marked fragment becomes the standard for the entire batch. If negative, the refusal happens before a large order and installation.