Buy a table base for a countertop: conical STL-041 or three-legged wooden STL-023 — which to choose

When you need Buy a table base for a tabletop not as a random support, but as the foundation of a future table, the model's appearance is just the beginning of the choice. The cone-shaped STL-041 and the three-legged STL-023 are almost the same height, but are constructed completely differently. STL-041 is a modern central support measuring 500 × 740 × 300 mm made of MDF and plywood, also available with beech or oak veneer. STL-023 is a prefabricated wooden underframe on three legs measuring 524 × 460 × 725 mm made of solid beech or oak.

Therefore, the question "STL-041 or STL-023" cannot be decided solely by a photo and the price of one base. The buyer chooses the type of support contour, material, method of connection to the tabletop, completeness, legroom, finish character, and the degree of readiness of the product set. For STL-041, the mounting plate FUR-034 is purchased separately, while STL-023 is supplied disassembled with assembly fittings and is linked by the manufacturer to the round tabletop ST-023 with a diameter of 670 mm.

Below we will analyze when it is more reasonable buy the conical underframe STL-041, and when — Buy a three-legged wooden table base STL-023The comparison is built not as a retelling of product cards, but as a route to purchase: from geometry and materials to the minimum cost of the set, checking overhang, fastening, finishing, and usage scenario.

Carved Skirt STL-007

from 1,083.08 $

Carved Skirt STL-008

from 1,731.68 $

Carved Base STL-012

from 1,562.75 $

STL-023 Base

from 371.46 $

Table leg STL-015

from 5,419.58 $

Base for table STL-020

from 2,741.43 $

Pedestal for Table STL-041

from 594.50 $

Baseboard for Table STL-042

from 591.44 $

Go to Catalog

Short answer: STL-041 or STL-023

STL-041 is chosen for a single central support, a modern conical silhouette, and freedom in designing the top part. It is suitable when the tabletop is still being selected, the base should act as a prominent design volume, and the customer is ready to separately purchase FUR-034 and agree on the fastening with the tabletop material. The basic MDF version is intended for covering enamel; versions with beech or oak veneer preserve the wood grain on the surface but do not turn the structure into solid wood.

STL-023 is chosen for solid beech or oak, a three-leg design, and a more straightforward product bundle. It is delivered disassembled, but the hardware for assembling the base is included. The manufacturer directly recommends the round tabletop ST-023 with a diameter of 670 mm and a thickness of 65 mm. This pair is easier for preliminary calculations, although before ordering, you still need to check the fastening, final height, overhang, and finish.

In terms of entry cost, STL-023 is noticeably more affordable. The basic STL-041 made of MDF together with the FUR-034 plate costs approximately 49,730 ₽ without the tabletop. STL-023 made of beech together with the recommended ST-023 costs about 34,870 ₽. The difference of 14,860 ₽ is not because one product is "better," but because these are different designs and different ways of assembling the table.

Watch video ...

Why these two underframes are correctly compared

The height of STL-041 is 740 mm, STL-023 is 725 mm. The difference is only 15 mm, or approximately 2.1% relative to the height of STL-023. The buyer is not choosing between a low coffee table and a high dining base. Both products are full-fledged underframes that can be used to design a dining or other table of suitable purpose after checking the top part.

It is the close height that makes the comparison useful: the design and configuration come to the forefront. One model forms a solid central column, the other rests on three spaced legs. In the first, the top part connects via a separate metal plate; in the second, the base assembly hardware is included, and the tabletop is offered as a related product.

It is useful for a buyer who has not yet decided on the type of base to open the catalog and buy a table base for the tabletop in the desired configuration, and then compare not abstract shapes, but a specific set: base, plate or assembly hardware, tabletop, fasteners, finish, and installation.

Our factory also produces:

Carved Skirt STL-011

from 2,059.48 $

Baseboard for Table STL-026-2

from 474.45 $

Table base for STL-026-3

from 377.70 $

Baseboard for Table STL-026-5

from 483.62 $

Pedestal for Table STL-027

from 2,742.83 $

Table pedestal STL-020-1

from 2,378.11 $

Baseboard for Coffee Table STL-035

from 848.72 $

Coffee Table Base STL-036

from 1,224.25 $

View Full Product Catalog

Full specification table for STL-041 and STL-023

The table shows the main point: the same product category does not mean the same purchase scheme. For STL-041, you need to pre-assemble an engineering unit from the base, FUR-034, a suitable tabletop, and fasteners. For STL-023, the path is shorter because there is a recommended ST-023, but this does not eliminate the need to check dimensions and connection method.

STL-041: what the buyer gets for the price of a conical base

Central under-table 500 × 740 × 300 mm forms a visually integral volume: the lower contour is wider, the top narrows to 300 mm. The structure is hollow and made of MDF and plywood. This is important for accurate product description. Even options with beech or oak veneer cannot be called a solid wood under-table, because veneer is a visible wood layer on a base of other materials.

The basic MDF version costs 45,340 ₽ and is designed for covering enamel. The MDF/beech veneer option costs 51,620 ₽, MDF/oak veneer — 53,880 ₽. All versions have 'Prestige' quality finish. The average production time for custom orders is stated as 5–10 working days, but this should be rechecked in the product card before payment.

The strength of STL-041 is not versatility, but expressive modern geometry. The cone can serve as the base for a round or oval table, a dining, writing, or conference model, if the dimensions and attachment of the top are calculated for the project. The customer gets the opportunity to choose a tabletop of the required diameter, shape, thickness, and finish, but along with this freedom, they take on the responsibility of checking compatibility.

Why a hollow construction does not mean a weak construction

The phrase 'hollow support' describes the design, not the permissible load. From the product card, one cannot conclude that STL-041 is weaker or more stable than STL-023. The permissible tabletop depends on its size, weight, material, load distribution, mounting plate, and fasteners. Therefore, the article does not provide promises regarding load capacity and does not replace a design check.

The advantage of hollow geometry is the ability to create a large visual volume without claiming that the entire part is carved from solid wood. The buyer gets a modern shape and a prepared surface, not a random blank that still needs to be designed and faced.

When a veneer option is needed

Beech or oak veneer is chosen when the surface should show a wood grain pattern, and the STL-041 shape suits the interior better than individual wooden legs. At the same time, the finishing decision is made before ordering: the direction of the grain, the final shade, and compatibility with the future tabletop affect the overall perception of the table.

The material helps to understand the differences between the base and the plate how to choose STL-041 and FUR-034 plate. It does not replace the product card, but allows you to prepare a list of questions about the tabletop, fastening, and finishing in advance.

STL-023: three solid wood supports and ready-made product logic

STL-023 underframe made of solid beech or oak has dimensions of 524 × 460 × 725 mm. It consists of three wooden legs arranged in a triangular pattern, is supplied unassembled, and is processed at the "Prestige" level. The beech version costs 28,330 ₽, the oak version — 37,220 ₽. The average manufacturing time to order is also stated as 5–10 working days.

The main practical difference is that the hardware for assembling the underframe itself is included in the kit. This should not be confused with the tabletop attachment: the composition of the assembly needs to be clarified separately. However, the buyer no longer needs to independently devise the connection of the three legs to each other. The base arrives as a ready-made product kit for assembly, not as a set of random wooden parts.

The second strong point is the connection with the round tabletop ST-023 for STL-023. The tabletop has a diameter of 670 mm, a thickness of 65 mm, is made of MDF, finished to the "Prestige" level, and cost 6,540 ₽ at the time of review. The product cards recommend each other, so the initial configuration is easier to calculate than for STL-041.

Three points of support: what they provide and what they do not guarantee

Three points geometrically define a plane, so the base does not require a fourth leg for contact with the floor. However, one cannot conclude from this that the finished table will never tip over. Stability depends on the support contour, the diameter and weight of the tabletop, the amount of overhang, the center of gravity, and the position of the load. A large surface, significantly extended beyond the triangle of supports, changes the behavior of the structure.

Before making a final choice, it is useful to read the analysis how to choose a round tabletop for STL-023, which explains the logic of overhang and three-point geometry. In the comparison article itself, these calculations are used as a selection criterion, not as a promise of guaranteed stability.

When the array is more important than the central silhouette

STL-023 is chosen by buyers for whom it is essential that the visible supports are made of solid beech or oak. Beech is suitable for covering enamel, oak — for solutions where expressive wood texture is preserved. This does not mean that one material is automatically better than the other: the choice depends on the finish, neighboring furniture, and overall budget.

To compare materials without marketing labels, you can study the section MDF, veneer, or solid wood for the underframe. In the specific pair STL-041 and STL-023, the material is related not only to appearance but also to the design, so swapping one product for another just for the word "solid wood" is not always reasonable.

The height difference of 740 and 725 mm: how important it is

Fifteen millimeters may seem like a small amount, but the final height of the finished table consists not only of the underframe height. The thickness of the tabletop, mounting plate or structural platform, and sometimes a technological gap are added to it. Therefore, two bases of almost the same height can give different final top marks.

For STL-023 with the ST-023 tabletop, simple arithmetic addition of 725 and 65 mm gives 790 mm, but it does not prove the actual height of the finished product: part of the tabletop or fastening unit may be positioned differently. The exact result depends on the drawings and connection. For STL-041, similarly, you cannot simply add the thickness of a random tabletop without considering FUR-034 and the mounting scheme.

If the height is critical for existing chairs, kitchen, or conference room, use the material how to calculate the height of the underframe and tabletop and check the calculation against the drawings of the selected set. In practice, the choice between STL-041 or STL-023 is more often determined by the design and appearance, while the 15 mm difference is clarified already at the design stage.

Central support or three legs: how seating at the table changes

STL-041 frees the perimeter directly under the edge of the tabletop from individual legs. This can be convenient for distributing seating positions, but the central cone takes up noticeable volume closer to the center and expands to 500 mm towards the floor. Consequently, you need to check not only the knees but also the position of the feet. A small tabletop over a wide lower contour can result in uncomfortable seating.

STL-023 leaves the central part open, but three legs extend to the perimeter in a triangular pattern. Seating positions should be arranged so that the support does not end up directly in front of the seated person's legs. For the round ST-023 with a diameter of 670 mm, the layout is already logically linked to the base, but it is still better to check the actual arrangement of chairs using a full-size template on the floor.

It is impossible to declare one design more comfortable in advance. For two to three seating positions, the three-leg layout may prove to be clear and compact. For another layout, the central cone will provide a cleaner perimeter. The decision is made after drawing the base and tabletop contours to scale, not based on a frontal product photo.

MDF and plywood or solid wood: comparison without simplifications

The question of "MDF or solid wood underframe" is often phrased as if the material itself determines quality and purpose. In this pair, the material is linked to the design. STL-041 uses MDF and plywood to form a hollow cone with a smooth change in diameter. STL-023 is assembled from three solid wood parts and forms a different support contour. You need to compare not just the raw material, but the finished system.

The MDF version of STL-041 is convenient for covering enamel when the buyer needs a uniform color without necessarily preserving the wood grain. Veneered options allow for the texture of beech or oak on the same cone shape. STL-023 in beech or oak shows the material precisely as solid wood supports. The difference becomes noticeable on the ends, joints, in the nature of the grain, and when choosing the finish.

Neither option can be automatically declared more durable without knowledge of the usage conditions, coating, installation, and load. The service life of the finished table depends on the entire assembly: the base, tabletop, fasteners, assembly quality, and operation. Therefore, the material helps choose the appearance and finishing method but does not replace structural calculation.

Beech veneer and solid beech

STL-041 with beech veneer retains the cone shape and MDF/plywood base, while the visible surface gets a beech grain. STL-023 made of beech consists of wooden supports. Both options can support a light or painted furniture palette, but the finish and behavior of the parts differ. The buyer needs to decide whether solid wood is important or the shape of the central cone is more important.

The price difference is significant: STL-041 with beech veneer cost 51,620 ₽, STL-023 made of solid beech cost 28,330 ₽. The difference is 23,290 ₽, or approximately 82.2% relative to STL-023. The surcharge is not due to "more beech wood," but to a different geometry, technology, and product type.

Oak veneer and solid oak

STL-041 with oak veneer cost 53,880 ₽, STL-023 made of solid oak cost 37,220 ₽. The difference is 16,660 ₽, or about 44.8% relative to STL-023. Here too, one cannot conclude that the veneered option should be cheaper than solid wood: the cost of the finished part is determined by the design, processing, and complexity of the shape.

Oak is chosen when a pronounced texture is desired. Before ordering, you need to match the shade of the base with the tabletop and other furniture. Even the same word "oak" does not guarantee a complete match of the pattern and tone after finishing, especially if the parts are made from different batches or have different bases.

Comparison of current base prices

The first line shows only the minimum entry budget and is not a comparison of identical materials. The basic STL-041 is made of MDF and plywood, while the minimum STL-023 is made of solid beech. The second and third lines are closer in visual request, but still compare veneer on a structural base with solid wood.

Prices are useful as a budget guide, but they need to be rechecked in the product cards before publishing and ordering. The calculation of a complete table also includes a plate or additional fittings, tabletop, fasteners, finishing, delivery, assembly, and installation. Therefore, a decision based on a single price line is almost always incomplete.

Why STL-041 is more expensive than STL-023 made of solid wood

At first glance, the price seems paradoxical: a modern underframe made of MDF and plywood is more expensive than a three-leg structure made of array. But the buyer is not purchasing a cubic meter of material. STL-041 is a large hollow form with complex geometry, tapering, a prepared surface, and the possibility of veneering. STL-023 is a prefabricated system of three wooden supports with a different manufacturing technology.

The cost also reflects positioning and design scenario. STL-041 often becomes the independent visual center of the table and requires coordination with a custom tabletop. STL-023 works as a more traditional wooden base and has a pre-suggested pair ST-023. The extra cost for STL-041 is justified when the conical shape solves the interior design challenge.

If the buyer simply needs a reliable base for a compact round tabletop and the three-leg design works, paying extra for the cone offers no practical benefit. If the project is built around a single central support and a clean modern silhouette, STL-023 cannot replace STL-041, even if it is cheaper and made of solid wood.

Actual cost of the minimum STL-041 kit

For STL-041 provided mounting plate FUR-034 for STL-041 with a diameter of 420 mm and a thickness of 2 mm. At the time of checking, it cost 4,390 ₽. The plate is purchased separately, and the fasteners for the tabletop are not included in the delivery and must be selected based on the material and thickness of the top part.

These amounts cannot be called the price of a finished table. They do not include the tabletop, fasteners for it, painting or tinting, delivery, assembly, or installation. However, the table shows the minimum mandatory product set for the base: purchasing the STL-041 without considering the FUR-034 is risky because the plate is part of the intended scheme.

Before payment, you should check the current price of the plate, its availability, and the exact delivery contents. You cannot assume that screws or other fasteners for any tabletop are automatically included in the kit. The choice of hardware depends on the material of the top part, its thickness, and design.

Actual cost of the STL-023 and ST-023 bundle

For STL-023, the manufacturer recommends a round tabletop ST-023 with a diameter of 670 mm and a thickness of 65 mm. It is made of MDF, has a "Prestige" finish, and cost 6,540 ₽ at the time of checking. This connection makes the initial calculation more transparent, although it does not automatically turn the set into a fully finished table.

Before ordering, you need to clarify exactly how the tabletop is attached to the base, whether additional fittings are required, what finish is chosen for both parts, and what the actual final height is. The phrase "recommended tabletop" confirms product compatibility at the manufacturer's offer level, but it is still useful for the buyer to check the current drawings and configuration.

The strong point of the bundle is the clear size of the top part. The buyer does not have to start the selection from scratch. If the 670 mm diameter matches the number of seats and the room, STL-023 + ST-023 provides a short path from choosing the base to a complete set.

Main price comparison: two minimum purchase routes

The basic STL-041 in MDF with the mandatory FUR-034 costs 49,730 ₽ without a tabletop. STL-023 in beech together with the recommended ST-023 costs 34,870 ₽. The difference is 14,860 ₽, and the more affordable bundle already includes the tabletop, while STL-041 does not.

This calculation does not mean that STL-041 is overpriced. It shows the price of design freedom and a complex central shape. For STL-041, the buyer can choose a different tabletop, diameter, shape, and finish, but must separately pay for and check all elements. STL-023 offers a more limited but clear route with a specific top part.

The commercial conclusion is simple: if the external cone shape is not critical, the STL-023 + ST-023 bundle is more budget-friendly. If the cone defines the table's architecture, comparing only the total is incorrect — you need to assess whether STL-023 solves the same design task.

What is included in each product's package

The most common mistake is to think that the word "underframe" means a fully finished table. In both cases, the tabletop is purchased separately. For STL-041, a designated plate is additionally mandatory. For STL-023, hardware for assembling the base is included, but the attachment of the top part and final finishing need to be clarified.

In the order, it is useful to record each element as a separate line: base SKU, finish, plate or assembly hardware, tabletop SKU, fasteners, finishing material, and assembly service if needed. Such a list reduces the risk that a beautiful base arrives at the site without the part necessary for installation.

Which tabletop is needed for STL-041

For STL-041, a universal diameter or shape cannot be specified without calculation. The card shows ST-030 as a related product, but compatibility must be confirmed separately. The choice depends on the dimensions of the upper diameter of 300 mm, lower contour of 500 mm, plate of 420 mm, tabletop material, its weight, thickness, and required overhang.

A round tabletop emphasizes the central symmetry of the cone. An oval one can use the same idea, but the load distribution and overhangs along the long axis change. A rectangular top requires particularly careful checking because the corners move away from the center and increase the leverage under load.

Before ordering, you need to prepare at least a sketch with a top view and side view. On the top view, mark the tabletop contour, FUR-034, and the base's lower diameter; on the side view, mark the height, top thickness, and the seated person's position. If the project is complex, it is reasonable to order a selection of the underframe and tabletop.

Why is ST-023 specifically linked to STL-023

ST-023 has a diameter of 670 mm and a thickness of 65 mm. This size is proposed by the manufacturer alongside STL-023, whose support scheme occupies 524 × 460 mm. The pairing creates a certain overhang relative to the triangular contour and forms a compact round table.

This does not mean that STL-023 is prohibited from being used with another tabletop. The source data has no such restriction. However, any replacement changes the overhang, center of gravity, fit, and mounting, thus requiring a new calculation. The more the top part differs from ST-023, the less basis there is for transferring ready-made conclusions.

Also, ST-023 cannot be transferred to STL-041 without verification. The cone has a different top node and includes FUR-034. The matching category "round tabletop" does not prove mounting compatibility.

How to calculate the final table height

The calculation starts not from the usual furniture height, but from specific parts. For STL-041, the base height is known to be 740 mm; for STL-023 — 725 mm. Then the actual thickness of the tabletop and the mounting node are taken into account. Simple addition is only suitable as a preliminary estimate if it is unknown how much the top part fits into the structure or sits above the plate.

For STL-041, the position of FUR-034 is important. The plate thickness is 2 mm, but the actual tabletop mark depends on the installation method. For STL-023, it is necessary to understand where the top platform of the three supports is located and how ST-023 is connected. Therefore, the final height should be taken from the assembly drawing or confirmed with a manager.

The height should be checked together with the chairs. Measure the seat height, the thickness of the apron or tabletop edge, and the free space for knees. A 15 mm difference between the bases may be less significant than the difference in thickness of the selected tabletops.

How to check the tabletop overhang

Overhang is the distance from the edge of the support contour to the edge of the tabletop. It affects the fit and the lever arm that occurs when a load is applied to the edge. For STL-041, it is necessary to consider not only the top diameter of 300 mm, but also the bottom contour of 500 mm: a too small top may visually and functionally conflict with a wide base.

For STL-023, the support contour is defined by dimensions 524 × 460 mm. The round ST-023 with a diameter of 670 mm has a different geometric overhang relative to the triangle in different directions. This is precisely why the calculation cannot be replaced by subtracting one number from another. A top view with the exact position of the three legs is needed.

Practical principles are revealed in the material how to check the overhangs and stability of the tabletop. For a purchase, it is important to draw one conclusion from it: first, the contour of the base and top are coordinated, then the parts are ordered. Buying a tabletop "with a margin" without a diagram can increase the risk of poor fit or tipping.

Tabletop fastening: where mistakes are most often made

STL-041 requires FUR-034, but the plate itself does not automatically solve the fastening issue. Fastening to the tabletop is not included and is selected taking into account the material and thickness of the top part. In MDF, solid wood, and other bases, different approaches are used; a random long self-tapping screw can damage the front surface or fail to provide the required fit.

For STL-023, the hardware for assembling the underframe is included, but this is not equivalent to a complete tabletop fastening kit. The delivery contents and connection points of ST-023 should be checked before ordering. If a different top part is used, the fastening is calculated anew.

Before installation, it is worth studying the material how to attach the table base to the tabletop, and then matching the recommendations with specific drawings. The article helps to understand the sequence of checks, but does not prescribe universal fasteners without data on the tabletop.

How the shape of the base affects knee and foot space

The central cone frees the edges of the table from individual legs. The sitter can move the chair along the perimeter without hitting their knees against a corner support. However, the lower part of STL-041 reaches 500 mm, so feet may encounter the base closer to the center. The smaller the tabletop, the more noticeable this effect.

For STL-023, the center space is more open, but each of the three legs occupies a sector at the edge. Seats are best placed between the supports, not opposite them. With three chairs, this layout can look natural; with a different number of seats, a plan check is required.

The most reliable household test is to make a full-size paper or cardboard template of the base, place it on the floor, mark the tabletop, and set up chairs. This does not replace stability calculations, but it quickly reveals conflicts between feet, walkways, and seating areas.

What to choose for the kitchen and dining room

Small kitchen or compact dining room

If you need a small round table and a diameter of 670 mm fits the room, STL-023 with ST-023 provides a clear set. Three legs form a compact base, and the budget is lower. Before ordering, check the number of chairs, the position of the legs, and the actual height.

STL-041 may be too expressive and wide at the floor for a cramped kitchen, especially if the tabletop is small. But in an interior with modern geometry and sufficient passage, the cone can replace a visually fragmented row of legs and unite the table into a single volume.

Spacious dining room

In a spacious dining room, the choice is often determined by the style and the planned tabletop. STL-041 is suitable for a custom round or oval top when the base should become the center of the composition. STL-023 is suitable for a more intimate wooden table where visible legs support the texture of the furniture.

You cannot automatically increase the tabletop diameter just because the room is large. Each base has limits determined by its design and stability. If you need a large surface, request a check from a specialist before placing the order.

What to choose for a desk

STL-041 is stated for desks after checking the tabletop and mounting. The central support can free up side areas, but the cone occupies space in the center. For a workspace, you need to check where the legs, cables, cabinet, and chair will be, and whether the tabletop will be too deep or long for a single support.

STL-023 is more logical for a compact round work or interior table than for a traditional long desk. The triangular layout and the recommended diameter of ST-023 set an intimate scale. A long rectangular tabletop cannot be placed on it without separate calculation.

If the work surface needs to be large, with equipment and constant load on the edges, it may be better to consider not a separate underframe but a different type of frame. The material helps to understand the difference. table frame or separate underframe — what to choose.

What to choose for a meeting room

For a meeting room, STL-041 looks convincing due to its single central silhouette and the ability to choose an individual top. However, a long meeting tabletop creates large overhangs, so a single central support may be insufficient without calculation. The purpose in the card does not imply compatibility with any size.

STL-023 is more suitable for a small round table for several people. The combination with ST-023 with a diameter of 670 mm sets a compact format that can be used in an office, short meeting area, or waiting area. For a large meeting room, a three-legged base with a small tabletop will not solve the capacity issue.

In a commercial space, it is especially important to coordinate stability, walkways, intensity of use, and maintainability of the coating. Before ordering, it is worth providing the manager with a plan, tabletop dimensions, and the expected number of seats.

What to choose for opaque enamel

For the covering enamel, STL-041 has an MDF option. The smooth surface allows building a color scheme around the cone shape without preserving the wood grain. STL-023 for a similar task is chosen from beech if the project requires exactly three solid wood legs.

Comparing these options only by price is insufficient. Enamel visually brings materials together, but the shape remains different: a single cone versus three legs. The joints, assembly, and behavior of parts also differ. Color does not make the structures interchangeable.

Before ordering, clarify whether only surface preparation is included or a separate painting service is required. The designation "Prestige" does not mean ready-made enamel. The color, gloss level, and finish coating need to be agreed upon separately.

What to choose for visible wood texture

STL-041 offers beech or oak veneer, STL-023 offers solid wood of the corresponding species. In the first case, the wood pattern works on a smooth conical surface; in the second, it is readable on individual supports. Light and fiber direction will be perceived differently.

If the buyer specifically wants solid wood, STL-023 matches the request more accurately. If a continuous central volume is more important, the veneered STL-041 provides a wood look without imitating a three-support scheme. You cannot call a veneered cone solid wood, but considering veneer as "not real wood" in a visual sense is also incorrect: it is a natural wood layer on a structural base.

For shade coordination, it is better to order the base and tabletop within the same design logic. Different species or different batches may differ after tinting.

What to buy with a table base

The underframe is rarely the only item in an order. STL-041 requires a separate FUR-034, while STL-023 is logically considered with ST-023. In both cases, materials for installation and finishing may be needed, but they should be selected for the specific structure, not from a universal list.

The table is not a universal installation specification. It shows product relationships confirmed by the diagram. Specific screws, glue, finish, and other materials are selected after determining the tabletop and assembly method.

How not to confuse an underframe with similar products

Table base and full table frame

A table base is a separate foundation to which a tabletop is selected. The frame may include a more developed support system, aprons, or other elements. If the top part is long, heavy, or requires perimeter support, a separate central or three-leg base may not be suitable.

Veneered table base and solid wood

STL-041 with beech or oak veneer remains a structure made of MDF and plywood. STL-023 is made of solid beech or oak. In the product card, you need to look not only at the wood species name but also at the main material line.

Assembly hardware and tabletop fastening

STL-023 includes hardware for assembling the base. This does not guarantee that the box contains all fasteners for any tabletop. FUR-034 also does not include fasteners for the tabletop. These two groups of parts should not be mixed.

Recommended product and guaranteed compatibility of any option

ST-023 is recommended for STL-023. If a different tabletop is chosen, the calculation changes. ST-030 is shown next to STL-041, but compatibility must be confirmed separately. An accompanying product is a reason to check the combination, not permission to assemble it without a drawing.

Practical selection for specific situations

Tabletop already purchased

First, determine its material, dimensions, thickness, weight, and possible attachment points. STL-041 cannot be selected without checking FUR-034 and overhangs. STL-023 cannot be selected just because three supports seem stable. Before purchasing the base, provide the tabletop parameters to the manager.

Tabletop not yet selected

STL-041 offers more freedom but requires full design. STL-023 with ST-023 provides a shorter and more affordable route. The decision depends on whether an individual shape is needed or a ready-made diameter of 670 mm is suitable.

Need a solid wood table

Among the compared models, STL-023 in beech or oak matches this request. STL-041 with veneer cannot be described as a solid wood base. If a conical shape is mandatory, a different material construction will have to be accepted.

A central support without separate legs is needed

Choose STL-041 and immediately add FUR-034 to the specification. Then calculate the tabletop and fasteners. STL-023 cannot imitate a single cone, even if covered with decorative elements.

A clear set with a round tabletop is needed

STL-023 and ST-023 form a confirmed product pair. Check the final height, finish, and mounting, but the original dimensions are already set.

Budget is limited

At current prices, STL-023 is more cost-effective. A beech base with ST-023 is 14,860 ₽ cheaper than the basic STL-041 with FUR-034, and the tabletop for STL-041 is not yet included. The savings are justified only if the three-leg form fits the project.

Mistakes when purchasing STL-041

• Consider the option with a veneer underframe made of solid beech or oak.
• Order the base without FUR-034 and discover the absence of the intended mounting assembly.
• Choose the tabletop only by outer diameter without checking the weight, thickness, and mounting.
• Assume that the fastening to the tabletop is included in the plate kit.
• Do not check the lower diameter of 500 mm and the position of the stops.
• Consider the "Prestige" treatment as a finished paint job.
• Use a random plate instead of the confirmed FUR-034.
• Declare STL-041 suitable for any round, oval, or rectangular surface.

Each of these errors increases the risk of additional costs after delivery. Before placing an order, open the STL-041 and FUR-034 cards simultaneously and create a single specification.

Errors when purchasing STL-023

• Consider three support points as a guarantee against tipping.
• Increase the tabletop relative to ST-023 without recalculating the overhang.
• Place chairs opposite the legs and get an uncomfortable seating position.
• Assume that the underframe is delivered fully assembled.
• Mix the hardware for assembling the base with the tabletop fastening.
• Order beech and expect ready-made enamel.
• Selecting oak solely by the word "array" without coordinating the shade and texture.
• Use a long rectangular tabletop without design verification.

STL-023 is simpler in terms of product logistics, but it is not ready-made furniture out of the box. Assembly, attachment of the top part, and finishing remain part of the project.

Who STL-041 is suitable for, and who should choose a different option

STL-041 is suitable for owners of modern interiors, designers, and furniture workshops who need a central conical shape and a custom-selected tabletop. It is appropriate for a dining, writing, or conference table if the dimensions of the top part and the attachment node are calculated. The buyer must be prepared for a separate plate, fasteners, and finishing.

The model is not suitable for those looking for a solid wood underframe, wanting a fully finished table without selecting parts, or who have already purchased a tabletop with unknown characteristics. It is also worth considering another base if the 500 mm lower contour interferes with feet or the room is too cramped.

Who STL-023 suits and for whom it will not solve the problem

STL-023 is suitable for a compact round table, an interior with visible wooden supports, and a buyer who values solid wood and a clear connection with ST-023. It is budget-friendly, comes with hardware for assembling the base, and allows choosing beech for enamel or oak with texture.

The model is not suitable if a single central column, a long conference surface, a strict minimalist cone, or a fully assembled product is required. For a large or heavy tabletop, the three-leg design cannot be used without calculation.

How to buy an underframe for STAVROS without incomplete configuration

Start with guide on how to choose a table base for a tabletop, if you haven't decided on the design yet. Then open both cards and compare the dimensions, material, and price in the current trade configuration. For STL-041, immediately add FUR-034 to the check; for STL-023, open ST-023.

Before ordering, prepare the tabletop parameters or requirements: shape, length and width or diameter, thickness, material, weight, and finish. Specify the table's purpose, number of seats, and room dimensions. This data allows checking not only the appearance but also the fit, overhangs, and mounting.

The cart or specification should separately list the base, mounting plate or attached tabletop, fasteners, finishing materials, and services if required. Current prices and production time need to be rechecked: saved values reflect the moment the scheme was prepared and may change.

Selection matrix by buyer priorities

The matrix helps quickly eliminate unsuitable options. It does not replace the drawing, but shows which requirement is decisive. If solid wood is needed, STL-041 does not meet the request regardless of price. If a single central column is needed, STL-023 will not be a full replacement, even if it is easier to assemble.

Priorities are best set before viewing shades and decorative samples. First, determine the construction, then the material and finish. The reverse order often leads to the buyer choosing a beautiful texture, but later discovering an unsuitable fit or the absence of the required mounting unit.

What to include in the technical specification for a table

Even for a single table, it is useful to create a short technical specification. It includes the underframe article number, its version, tabletop dimensions, top material, intended thickness, table purpose, and number of seats. For STL-041, FUR-034 and the need to select fasteners are separately recorded. For STL-023, the selected ST-023 or parameters of an alternative tabletop are specified.

The technical specification also includes the final height, required color or type of texture preservation, assembly location, and room constraints. For example, a narrow doorway, the need to go up stairs, or on-site assembly can affect logistics and the sequence of work. The source files do not contain specific delivery conditions, so such issues should be clarified before payment.

The more detailed the specification, the lower the risk that different project participants understand the set differently. A designer might mean a veneered cone, a craftsman MDF for enamel, and a buyer solid oak. The exact name of the version removes this ambiguity.

How to check the scale before purchase

The photo of the card does not show the actual volume of the base in the room. STL-041 has a lower contour of 500 mm and a height of 740 mm, so in a small room it may look larger than on a white background. STL-023 occupies a footprint of 524 × 460 mm, but there is air between the legs, making the visual perception different.

Make two templates from paper or painter's tape: the base contour on the floor and the tabletop contour above it. Place chairs, check passages, foot position, and the ability to pull out the chair. For STL-041, also mark the upper diameter of 300 mm and the plate of 420 mm. For STL-023, mark the three actual support points, not just the outer rectangle of 524 × 460 mm.

Such a mockup does not confirm strength, but it reveals ergonomic errors. It is especially useful when the table is placed next to a kitchen island, wall, sofa, or passageway, where every centimeter affects comfort.

Finishing: when to make a decision

The finish is chosen before the final order because it is related to the version. STL-041 made of MDF is intended for covering enamel; veneered options are chosen for a visible wood surface. STL-023 made of beech is suitable for enamel, oak for solutions with a pronounced texture.

You cannot assume that all options can be swapped without consequences after delivery. If oak veneer is ordered but the project requires a dense light enamel, the buyer pays for material whose texture will be hidden. If MDF is chosen and then there is a desire to show the natural pattern of solid wood, the finished base no longer matches the new request.

It is useful to match a color sample with the countertop, floor, and adjacent furniture. Even a neutral shade changes depending on lighting and gloss. The source data does not include ready-made colors and coatings, so the specific finish needs to be clarified separately.

Assembly on site or in advance

STL-023 is delivered disassembled, so the assembly location needs to be determined in advance. Assembly on site can simplify entry but requires a level area, tools, and geometry control. Assembly before delivery allows checking the base in advance but increases the overall dimensions of the finished unit.

STL-041 arrives as a separate underframe, but the final table is still assembled after installing FUR-034 and the countertop. It is necessary to ensure access to fastening points and protect the finished surface from damage.

In both cases, the decision depends on the site conditions. The source data does not confirm a specific assembly service or its cost, so it cannot be included in the kit price without clarification.

Final check before payment

• Verify the article number: STL-041 or STL-023.
• Check exact material and finish execution.
• Reopen the card and clarify the current price.
• Confirm average lead time and availability.
• For STL-041, include FUR-034 and separately define fasteners.
• For STL-023, confirm the assembly hardware set and the selected tabletop.
• Agree on the dimensions, weight, and material of the top part.
• Check the final height, overhangs, and legroom.
• Clarify finish and assembly location.
• Fix all positions in one specification.

This check takes less time than fixing incomplete sets after delivery. The buyer's main task is to order not a single beautiful support, but a coordinated set of parts from which the desired table can be assembled.

Three budget purchase scenarios

Rational compact set

STL-023 in beech together with ST-023 forms an initial bundle of about 34,870 ₽. This scenario is suitable when a diameter of 670 mm is sufficient, the three-leg design is acceptable, and the buyer needs a solid wood base for enamel and a shorter path to a complete set. The final budget still does not include finishing, delivery, and possible additional installation materials.

Oak wooden bundle

STL-023 in oak with ST-023 costs approximately 43,760 ₽. The buyer gets visible solid oak legs and a matching MDF tabletop. Before ordering, it is important to coordinate the finishing of two different materials so that the base and top are perceived as a single table.

Custom modern table

Basic STL-041 with FUR-034 starts from about 49,730 ₽ without a tabletop. Veneered options with a plate reach 56,010–58,270 ₽ also without the top part. This route is more expensive and requires more decisions, but allows building a table around a conical leg, custom shape, and finish.

Comparing budgets is only useful after checking current prices. It shows the cost structure: for STL-023, a significant part of the set is already determined, for STL-041, the main cost of the tabletop remains ahead.

Frequently asked questions

Which base is cheaper — STL-041 or STL-023?

According to current data, STL-023 is more affordable. Beech STL-023 cost 28,330 ₽, basic STL-041 in MDF — 45,340 ₽. If you add FUR-034 and ST-023, the difference between the minimal routes is 14,860 ₽ in favor of STL-023, and for STL-041 the tabletop is not yet included.

Can STL-041 be called a wooden base?

It is more correct to specify the exact material: MDF and plywood, and in some options — beech or oak veneer. STL-041 cannot be called a solid wood base.

Is STL-023 completely ready for installation?

It is delivered disassembled, and the hardware for assembling the underframe is included. The tabletop is purchased separately, and the attachment of the top part and finishing need to be clarified.

Is it mandatory to buy FUR-034 for STL-041?

In the product scheme, FUR-034 is specifically designed for STL-041 and is purchased separately. Replacing it with a random plate without verification is not allowed.

Does FUR-034 include fasteners for the tabletop?

No. According to the source data, fasteners for the tabletop are not included and are selected based on the material and thickness of the top part.

Can ST-023 be installed on STL-041?

Automatic compatibility is not confirmed. STL-041 uses a different mounting assembly, so dimensions and fastening need to be checked separately.

Can I install a different tabletop on STL-023?

There is no prohibition in the source data, but a new tabletop changes the overhang, center of gravity, seating, and mounting. A separate calculation is required.

Which base is more stable?

You cannot honestly determine a winner using cards. Stability depends on the tabletop, overhang, weight, center of gravity, fastening, and load position.

What to choose for enamel?

For STL-041, MDF is chosen; for STL-023, beech. The "Prestige" treatment is not a ready-made paint, so the finish needs to be agreed upon.

What to choose for an oak texture?

STL-041 is available with oak veneer, STL-023 is made of solid oak. The choice depends on whether the conical shape or massive individual supports are more important.

Which model leaves more legroom?

There is no definitive answer. STL-041 frees up the perimeter from legs but occupies the center and widens toward the floor. STL-023 opens up the center, but three supports occupy separate sectors near the edge.

Is STL-041 suitable for a conference table?

The card allows this use after checking the tabletop and mounting. For a large or long surface, a structural calculation is required.

Will STL-023 work for four people?

This depends on the tabletop diameter, the position of the three legs, the size of the chairs, and the required space. For ST-023 with a diameter of 670 mm, it is better to make a seating plan to scale.

How to calculate the final height?

You need to consider the base height, the actual position of the mounting unit, and the tabletop thickness. Simple addition gives only a preliminary estimate.

What should be checked before ordering?

Dimensions, material, finish, current price, production time, kit composition, tabletop, fasteners, trim, overhangs, legroom, and final height.

Where can I see other options?

Open the STAVROS underframe category and compare designs by height, material, support type, and mounting method. This is useful if neither STL-041 nor STL-023 fits the project.

Result: cone STL-041 or three wooden supports STL-023

Before making a final decision, it's useful to once again match the base shape with the actual room, not just with the image on the card.

STL-041 and STL-023 are almost the same height, but the buyer chooses between two different types of table bases. STL-041 is a modern central hollow support made of MDF and plywood, available for enamel or veneer. It requires a separate FUR-034 and individual inspection of the tabletop. STL-023 is a three-leg base made of solid beech or oak, supplied with assembly hardware and associated with the round ST-023.

STL-041 is justified when the conical shape and freedom to choose the top are part of the project. STL-023 is more rational when a compact round table, solid wood, and a clear set with a lower budget are needed. Neither model should be chosen solely by photo, material, or price: the tabletop, overhangs, attachment, fit, and finish remain decisive.

On the STAVROS website, before ordering, compare product cards, add related items, and re-check current prices and delivery times. A consciously assembled set — base, tabletop, mounting, and finish — is more reliable than a random purchase of parts that only match in style.