KON-004 partition kit: how to assemble a wooden partition for zoning

The KON-004 STAVROS partition kit is a decorative wooden post 2800 mm high for assembling a partition for a specific opening. One kit is not the entire partition: for zoning a kitchen-living room, hallway, studio or commercial space, you need to calculate the number of posts and the spacing between them. In this article, we break down how buy a wooden partition in the KON-004 kit, how many kits exactly you need for your opening, and how such a partition fundamentally differs from ordinary wooden slats.

KON-001 Partition Kit

from 343.77 $

Partition kit KON-002

from 480.40 $

Partition kit KON-004

from 424.89 $

Partition kit KON-005

from 367.56 $

Partition kit KON-006

from 525.29 $

Partition kit KON-007

from 446.73 $

Go to Catalog

What is the KON-004 partition kit

Let's start with the main thing, because this point raises the most questions from new customers. Partition kit KON-004 This is not a ready-made turnkey partition, not a modular system, not a panel of a given width. It is a set of wooden elements for assembling one decorative post 2800 mm high. Exactly one — not two, not three, not the entire partition as a whole.
To create a full-fledged wooden partition for zoning, you need several kits — and it is their quantity that determines the width of the future structure. One kit equals one vertical post. Want a partition 1200 mm wide with a 300 mm pitch — order four kits. Want light zoning in a studio 900 mm wide — two or three kits are enough. The logic is simple, but it is important to understand it before starting calculations and placing an order.
Each KON-004 kit includes: geometric figure KN-001 (three pieces, diameter 88 mm, height 110 mm), geometric figure KN-005 (seventeen pieces, diameter 76 mm, height 66 mm), molding MLD-060 2400 mm long, and molding MLD-060 1000 mm long. The molding serves as the load-bearing axis of the post with a mounting diameter of 34 mm. All decorative turned elements are threaded onto this axis — they form the visual rhythm and plasticity of the post. In total, one post has twenty turned elements: this is the largest total number among all kits in the KON series, which provides the characteristic richness of the silhouette with a compact profile of 88 mm.
Wooden construction set STAVROS includes seven partition kits — KON-001, KON-002, KON-003, KON-004, KON-005, KON-006, and KON-007. Each has its own character: large spherical accents in KON-002 and KON-003, a more laconic and graphic rhythm in KON-004 and KON-005. The buyer chooses the model according to the interior style and desired visual density of the partition, and then orders the required number of kits for a specific opening.

Watch video ...

How this article differs from other STAVROS materials

Clarification for those who have already read other publications on the site. There will be no general discussion about beautiful wooden partitions as a phenomenon here. There will be no material about slatted partitions — those solutions where the decor is built on simple linear profiles without turned elements. There will be no discussion about flat balusters, timber, linear wooden slats, or decorative grilles.
The focus of this article is narrow and deliberately precise: how to choose, calculate, and buy a wooden partition in the format of the KON-004 kit. How to understand how many kits you need for your opening. What pitch between posts to choose. What material — beech or oak — suits your finish. And how exactly KON-004 differs from slatted partitions and why this difference matters when choosing.
This is a commercial article for a specific product — for Partition kit KON-004 STAVROS. All information below is written with one goal: to help you make an accurate, informed purchasing decision.

Our factory also produces:

Carved Trim NPU-270

from 21.84 $

NPU-302 Molded Decoration

from 10.25 $

Decor Set C-002-1-1

from 547.37 $

Wooden Decor N-325

from 15.86 $

Polyurethane relief decoration KRPU-021

from 16.71 $

Polyurethane relief decoration KRPU-053

from 64.04 $

Wooden Decor N-489

from 6.83 $

Partition set KON-003

from 587.87 $

View Full Product Catalog

Which rooms is KON-004 suitable for

Kitchen-living room

Open-plan kitchen-living room is perhaps the most popular use case wooden partition for zoning. The task in such spaces is always the same: to visually separate the kitchen area from the living area without blocking light, creating a cramped feeling, or breaking the unity of the interior.
A solid wall is inappropriate here — it cuts the space and turns a large room into two small ones. A screen is unconvincing — it looks temporary and non-functional. But a buy wooden partition for room zoning in the form of several vertical posts KON-004 is a solution that simultaneously zones and decorates. Light passes freely between the posts. Air and visual depth of the space are preserved. At the same time, the boundary between zones is read clearly and architecturally convincingly.
The compact width of the decorative element of 88 mm makes KON-004 posts especially organic in a kitchen-living room: they do not compete with kitchen facades, do not overlap the countertop line, and do not clash with living area furniture. Buy wooden partition for room zoning in the color of kitchen facades or in an accent shade — both options work, and both can be implemented specifically with KON-004, because the quality of the "Under Enamel" relamination allows painting the posts in any color from the RAL catalog.

Entryway

The hallway is a special zone. Every centimeter matters here, because the area is usually limited, and there are many tasks: storage, changing clothes, the first impression of the interior. Buy a wooden partition for a room for the hallway is primarily a way to psychologically separate the entrance area from the living space without losing the sense of volume.
KON-004 posts in the hallway work as a light visual screen: they mark the boundary, create a sense of a buffer between the entrance and the living area, but do not block the light or make the corridor darker. Buy a decorative wooden partition for the hallway with a spacing of 250–350 mm between the posts will provide sufficient visual density for the zone to be perceived as separate, and at the same time will not turn the corridor into a tunnel.
Stylistically, KON-004 posts with their rounded turned elements perfectly combine with wooden architraves, solid wood baseboards, and natural wood door frames. Buy a decorative wooden partition into a unified finish with architraves and baseboards is a design-savvy technique that turns a set of individual elements into a cohesive architectural ensemble. This works especially expressively in neoclassical interiors and modern classics.

Studio

A studio is a space that requires zoning by definition, but cannot tolerate heavy solutions. You cannot install a real wall here without approvals and sacrificing area. You cannot place massive furniture as a divider—it will eat up the already small space. But Wooden partition for zoning from KON-004 racks is exactly what you need: a tall, airy, slender structure that defines a zone without taking up space.
Buy wooden partition for a studio to separate the sleeping area is a classic scenario. Several KON-004 racks spaced 350–400 mm apart create a visual screen at the head of the bed or to the side: the zone reads as separate, while daylight continues to flow freely into the depth of the room. No major work, no loss of light, no approval from the management company.
Buy wooden partition for dividing a workspace in a studio is another popular option. A small screen of three or four KON-004 racks between the desk and the relaxation area creates a psychological distance that helps switch between work and relaxation modes—especially relevant for those who work from home.

Commercial interior

Commercial spaces—showrooms, salons, cafes, restaurants, short-term rental apartments, meeting rooms—are a special category of tasks. Here, the partition should not only zone but also shape the atmosphere, set the visual level, and speak to the style and class of the establishment.
Buy wooden decorative partition for a restaurant or cafe is a way to create private zones without completely closing off the space. Visitors behind a partition made of KON-004 racks feel secluded, while the overall atmosphere of the hall is preserved—sound, light, the feeling of being in a living space. This is exactly the solution restaurateurs value: privacy without walls, intimacy without isolation.
In showrooms and salons, KON-004 racks work as lightweight decorative dividers between exhibition zones: they highlight a separate "office" for individual consultations, separate the staff work area, and create a theatrical accent at the entrance. Decorative wooden partition buy for a commercial interior made of solid wood — this is an element that reads as expensive and thoughtful even to guests who are not design-savvy. Natural wood always speaks to attention to detail.

How to calculate the number of KON-004 kits

This is the main practical section of the article, and it should be studied carefully — this is where errors most often occur when ordering.

Basic formula:

Number of kits = opening width ÷ selected step between posts

The result is rounded up. The final quantity is adjusted taking into account the method of fastening the outer posts and the desired visual density.

Table for calculating the number of KON-004 posts:

It is important to understand: the calculation in the table is preliminary. The exact number of posts is determined by the actual width of the opening, the method of attachment to the floor and ceiling, the presence or absence of a frame, as well as the visual result you want to achieve — a denser structure or a light, airy one. Before placing an order, it is recommended to consult with a STAVROS manager: they will help calculate the exact configuration for the parameters of your specific opening.
One set equals one post. Multiply the number of posts by the cost of one KON-004 set to get the cost of the partition for your opening. The price on the website is for one set, not for the entire structure you see in the visualization.

How to choose the spacing between posts

The spacing between posts is perhaps the most important decision when designing a wooden partition for zoning. It determines not only the number of KON-004 sets you need to order, but also the overall visual character of the structure: how dense or airy it will be, how well it will transmit light, and how clearly it will define the boundary between zones.

Dense spacing 250–300 mm

The minimum spacing between KON-004 posts creates a structure that is as close as possible in function to a traditional partition. The posts are placed close to each other, the partition is perceived as a dense decorative screen, through which the space is guessed but not seen in detail.
This solution is chosen when real, not symbolic, privacy is important: separating a sleeping area in a studio, enclosing a workspace, creating an intimate zone in a restaurant or showroom. With a spacing of 250–300 mm buy wooden slatted partition or a partition based on KON-004 posts gives a fundamentally different visual result: the slats create vertical gaps, the KON-004 posts create a rhythmic texture of rounded shapes — fundamentally richer in plasticity.

Medium spacing 350–450 mm

The optimal option for most residential spaces and most zoning tasks. With a spacing of 350–450 mm, the structure of KON-004 posts is perceived as light, airy, but visually convincing. The boundary between zones is clearly readable, light passes freely, the space is not divided into isolated chambers — rather, it is structured and gains internal order.
Buy a wooden partition for zoning With a pitch of 400 mm, this is the most popular format for a kitchen-living room, hallway, and living room. It is at this pitch that KON-004 reveals itself most expressively: the rhythm of the posts reads as a cohesive decorative motif, while each post remains an independent object and is not lost in a dense structure.

Free pitch 500–700 mm

A large pitch between posts is chosen when the main task is not to create a boundary, but to indicate a transition. With a pitch of 500–700 mm, a partition made of KON-004 posts turns into a light rhythmic accent in the space: the posts are spaced widely, with air, light, and a view deep into the room between them. Such a structure does not zone in the strict sense—it places accents, hints at the presence of different zones, and adds structure to the interior without barriers.
For large open spaces, studios with high ceilings, showrooms, and living rooms with an area of 30 square meters or more, this is a very striking solution. Several KON-004 posts with a pitch of 600 mm in a large space create the effect of an almost sculptural installation—vertical objects in the air that organize the space without dividing it.

Beech or oak: which material to choose

Beech partition under white enamel — this is one of the most popular options. Beech is a wood with a uniform, almost patternless structure. After "Prestige" sanding, the beech surface accepts enamel in an even layer, without breakthroughs or textural "interference." A post under white enamel looks like a laconic graphic object — a clean vertical line with soft rounded accents. The compact 88 mm profile in white in a light interior almost dissolves into the space, creating delicate, almost architectural zoning.
Oak partition is a fundamentally different visual and tactile experience. Oak is a wood with an expressive fiber pattern, characteristic "mirrors", and a warm natural hue. Under clear oil or tinting, the oak texture is revealed on every turned element — KN-001 and KN-005 under tinting become almost sculptural objects, where the natural wood pattern is read in the smallest details. Oak is chosen for interiors where the naturalness of the material is an artistic value, not just a technical factor.
Both options are available within the KON-004 kit — the choice is made when placing the order. It is important to decide on the finish coating in advance: if enamel is planned, order from beech with the "Under enamel" gluing; if tinting or oil is planned and natural texture is important, choose oak.

KON-004 or slats: what is the fundamental difference

This question arises for many buyers. Visually and functionally, wooden partitions based on KON-004 posts and slatted partitions seem like similar solutions — both create vertical lines, zone the space, and let light through. But the difference between them is much deeper than it seems at first glance.

A slat is a straight profile. It creates rhythm through the repetition of identical vertical lines. This rhythm is uniform, devoid of hierarchy, calm, and functional. A slatted partition is the right choice for interiors where conciseness is important and there is no room for decorative activity: Scandinavian style, Japanese minimalism, Japandi, eco-minimalism.
buy wooden slatted partition or choose the KON-004 kit — it's a matter of stylistic positioning. If your interior features stucco molding, turned furniture legs, profiled baseboards, wooden architraves — KON-004 integrates organically into this environment. If the interior is built on flat surfaces, neutral textures, and an absence of decorative activity — slats will be the right choice.
The KON-004 stand is a voluminous decorative object. It has shadows, relief, and a hierarchy of forms: large accent KN-001 and small rhythmic KN-005. With side lighting, shadows from protruding elements appear on the stand — a lively, dynamic chiaroscuro that cannot be achieved with a flat slat. Buy wooden slatted partition or bet on the turned decor KON-004 — this means choosing between line and volume, between monotony and rhythm, between function and artistic statement.

Mistakes when choosing a wooden partition

Practice shows that the same mistakes are made over and over again — especially by those who choose a wooden partition for zoning for the first time. Let's break down each of them so you don't repeat them.
Considering one KON-004 set as a complete partition. This is the most common mistake. One set is one post 2800 mm high. For a partition, you need as many sets as there are posts planned for a specific opening.
Not measuring the exact width of the opening. An "eyeball" calculation leads to ordering either too few sets (the partition turns out sparse and doesn't fulfill the zoning function) or too many (extra posts and extra costs). Measure the opening to within 5 mm before placing your order.
Choosing too large a spacing in a small room. In a room of 18–20 square meters, a partition with a 600 mm spacing between posts looks like lonely posts in space — it doesn't zone, only creates visual noise. For small rooms, a spacing of 300–400 mm is optimal.
Making the partition too dense in a small room. The opposite mistake: a spacing of 150–200 mm in a 15 square meter room turns the partition into a heavy screen that visually divides an already small space in two. A dense structure is appropriate in large spaces or where real privacy is needed.
Not accounting for ceiling height. KON-004 posts 2800 mm high are designed for rooms with standard and increased ceiling heights. In a room with 2500 mm ceilings, the posts will need to be trimmed — this is normal, but important to consider during design.
Not planning the attachment to the floor and ceiling in advance. The attachment method affects the number and placement of the outermost posts, the presence or absence of a frame, and the final appearance of the structure. This issue needs to be resolved before, not after, ordering.
Not choosing the finish in advance. Beech under enamel and oak under oil are different blanks with different gluing. The choice of finish affects which kit option to order. If you haven't decided on the coating before ordering, you risk getting the wrong material for your design.
Mixing KON-004 with flat balusters in the same project. Flat balusters have a fundamentally different silhouette and plasticity. Using them together with KON-004 posts in the same partition creates visual inconsistency — the decorative rhythm is disrupted and the structure looks random.
Using the query "sliding partition" if the product is not sliding. KON-004 is a stationary structure. It is attached to the floor and ceiling and is not intended for movement. Do not mix it with sliding or folding systems — these are different product categories with different purposes.
Directing the customer to an article about slats instead of the KON-004 product card. If you have already decided to purchase the kit, use a direct link to Partition kit KON-004 — there you'll find all specifications, kit contents, material options, and the ability to place an order.

Full line of KON kits: how to choose your model

Wooden construction set STAVROS — this is not a single product, but a whole system of interconnected kits. Seven models: KON-001, KON-002, KON-003, KON-004, KON-005, KON-006, and KON-007. Each has its own character, its own plasticity, its own visual intensity.
KON-004 holds a special place in this lineup. It is a model with a compact decorative profile (maximum width 88 mm) and the largest number of turned elements per post (20 pieces). Compared to KON-002 and KON-003, where large balls with a diameter of 170 mm dominate, KON-004 looks more delicate and graphic. Compared to KON-001, where there are fewer decorative elements, KON-004 looks richer and more saturated in rhythm.
Partition kit KON-005 — the closest "relative" of KON-004 in the line. Both models have a compact profile and are suitable for lightweight airy partitions. The difference is in the composition of elements and the nature of the rhythm. If KON-004 is built on the contrast between KN-001 (88 mm) and KN-005 (76 mm), then KON-005 has its own combination of elements with a different hierarchy of accents. The choice between them is a matter of which visual character suits you best. Both options are available on the website, and both can be compared in the product cards in the section wooden construction set.
Solid Wood Items STAVROS is a broader category that includes not only the partition construction set, but also carved decor, stucco, moldings, furniture legs, and other elements made of natural wood. If you need a comprehensive approach to interior decoration — all the necessary assortment is concentrated in this section.

Mounting KON-004 posts: practical aspects

A partition made of KON-004 posts is a stationary structure. It is attached to the floor and ceiling and is designed for permanent installation in a specific location. This fundamentally distinguishes it from mobile screens and sliding systems.
There are several mounting methods, and the choice between them affects the final appearance of the structure. Mounting with a visible base: a decorative platform or frame is mounted to the floor, into which the posts are inserted — their ends are hidden by the mounting elements. Mounting without a visible base: the posts go directly into the floor and ceiling through embedded elements — the structure looks as clean as possible, without extra details. Frame method: a wooden or metal frame is mounted around the perimeter of the opening, into which the posts are installed with a fixed spacing.
The mounting method must be chosen before placing an order — it affects how the ends of the posts will be used and the exact number of kits. STAVROS specialists will assist with this during the consultation before purchase.

About the company STAVROS

STAVROS is a Russian manufacturer of decorative products from solid natural wood, with a history dating back to 2002. Two artists — Andrey Ragozin and Evgeny Tsapko — founded a creative workshop for making carved wood products, and within a year the company was participating in the reconstruction of the Konstantinovsky Palace in Strelna. Subsequently, STAVROS worked with the Hermitage, the Alexander Palace, the Trinity-Izmailovsky Cathedral, the Sheremetev Mansion, and other cultural heritage sites.
Over more than twenty years of operation, STAVROS has built a production system that combines an artistic understanding of wood and its plasticity with industrial manufacturing precision. 'Prestige' sanding is not a marketing term, but a specific standard of multi-stage manual surface treatment, where the product does not require additional finishing before painting. All kits of the KON series, including KON-004, are produced with this quality standard.
STAVROS works with architects, designers, furniture manufacturers, carpentry workshops, restorers, and private clients. Orders are accepted from a single piece, with Contact us to confirm shipping to your destination. via the CDEK transport company. Showrooms are located in St. Petersburg and Moscow.

FAQ: Answers to popular questions

Is one KON-004 kit the entire partition?
No. One KON-004 kit is one decorative post with a height of 2800 mm. For a full wooden partition for zoning, several kits are needed — the quantity is determined by the width of the opening and the spacing between the posts.

How to calculate the number of KON-004 kits?
Divide the width of the opening by the selected spacing between the posts. For example, an opening of 1200 mm with a spacing of 400 mm will require 3 posts, i.e., 3 KON-004 kits. The calculation is refined considering the mounting method and desired visual density.

Where to buy the KON-004 partition kit?
Direct link to the product page: https://www.stavros.ru/products/izdeliya-iz-massiva/konstruktor/komplekt-peregorodki-kon-004/

Beech or oak for a decorative partition?
Beech — for enamel and painting in a solid color, the surface is uniform without textural manifestations. Oak — for tinting, oil, or clear varnish, when it is important to emphasize the natural wood grain. The choice depends on the final coating planned for the partition.

How is KON-004 different from a slatted partition?
Slat — a flat linear profile creating a uniform rhythm of vertical lines. KON-004 post — a voluminous decorative element with turned rounded details, shadows, relief, and hierarchy of forms. These are fundamentally different solutions with different plasticity and stylistic positioning.

Can KON-004 be painted in the desired color?
Yes. The "For enamel" gluing quality prepares the surface for applying any paint and varnish coating — enamel, primer, varnish. The posts are painted in any RAL color with a smooth, professional result.

What is the production time?
The average time is 5–10 working days. Contact us to confirm shipping to your destination. via CDEK.

Are there other kits besides KON-004?
Yes, the full line — KON-001, KON-002, KON-003, KON-004, KON-005, KON-006, and KON-007 — is presented in the section wooden construction set on the STAVROS website. Each model has its own plasticity and visual character.

What else is in the solid wood products section?
In the section of solid wood STAVROS — carved decor, moldings, furniture legs, stucco elements, linear profiles, and other natural wood products for comprehensive interior decoration.