Two doors should look like a pair: how to buy carved wooden overlays N-318L and N-318R and not mix up the decor when ordering

The cabinet has two identical hinged doors. The handles are positioned symmetrically, the panels mirror each other, and the width and height of the fronts match. All that remains is to add carved wooden decor. The catalog contains two very similar items — N-318L and N-318R. They have the same size range, the same materials, and the same sanding options. This leads to a tempting thought: "They're probably actually the same overlay — I'll order two pieces of one SKU, and the cabinetmaker will figure it out later."

For a paired front, this should not be done. N-318L and N-318R are two separate SKUs. If the composition is meant to be paired, you need to specify N-318L and N-318R separately in the order, choose the same size, material, and finish quality for both, and then assign each SKU to a specific position on the furniture according to the drawings.

At the same time, you cannot automatically interpret the letters L and R as a ready-made instruction "place this on the left, this on the right." For a specific front, you need to open both drawings, place them next to the furniture diagram, and only then label the positions. This way, the buyer does not turn two related overlays into "N-318 — 2 pcs." and does not defer the orientation decision to the installation stage.

If the pair has already been approved, you can separately open carved wooden overlay N-318L и carved wooden overlay N-318R. If the model is still being selected, it is more convenient to first look at the general catalog, where you can Buy wooden furniture decor.

Wooden Decor N-318L

from 16.10 $

Wooden Decor N-318L

from 16.10 $

Go to Catalog

Carved wooden overlays N-318L and N-318R: what is actually sold

Both cards currently have the same size chart:

Available for both SKUs:

• Beech;
• Oak;
• Standard;
• Prestige;
• base configuration "Under enamel";
• production to order on average 5–10 days.

Current prices for N-318L and N-318R are the same:

Matching price and size does not turn positions into one product. Paired specification is still built with two lines.

For example:

N-318L / 65×65×9 mm / beech / Prestige / For enamel / 1 pc. / position per drawing F1

N-318R / 65×65×9 mm / beech / Prestige / For enamel / 1 pc. / position per drawing F2

This is much safer than:

N-318 / 65 mm / 2 pcs.

Watch video ...

Two identical leaves do not mean two identical article numbers

In furniture design, symmetry is often created not by two identical decorative parts, but by a pair of related elements.

The buyer sees two identical doors and naturally thinks in terms of quantity:

two leaves → two identical overlays.

But here the correct logic is different:

two leaves → one paired composition → two specific SKUs.

This is especially important if the decor is located close to the central joint of the leaves. An error in the article number becomes immediately noticeable: instead of a coordinated pair, you can get two elements of the same pattern and disrupt the composition.

Therefore, if you need buy furniture decor, first decide whether the project is single or paired. For N-318L/N-318R, the paired scenario must be recorded in the specification before payment.

Our factory also produces:

Wooden Christmas balls SUV-002

from 12.32 $

View Full Product Catalog

N-318L and N-318R: first the drawing, then assignment to a specific leaf

The letters in the article number cannot be used as the only installation instruction.

Correct order:

1. open drawing N-318L;
2. open drawing N-318R;
3. place a drawing of two leaves side by side;
4. determine the orientation of the ornament in a specific composition;
5. write the exact SKU on the furniture project;
6. only then transfer the items to the order.

This protects against a situation where the buyer has ordered a "logical" pair, but the installer already realized on site that the designer intended it differently.

In a good working drawing, instead of words:

left overlay;

right overlay;

it is better to have:

F1 — N-318L / 65×65×9

F2 — N-318R / 65×65×9

Then the cabinetmaker works with the article number, not with the verbal interpretation of letters.

Four dimensions on the facade that need to be checked before purchasing N-318L and N-318R

A paired overlay may match the pattern perfectly and still conflict with the facade.

Before ordering, four zones are checked.

Free field

A size of 50, 65, or 87 mm must fit into the actual free area of the facade, not just the overall door width.

Distance to handle

If the overlay is located next to a furniture handle, you need to check not only the static image, but also the comfort of the grip.

Distance to the adjacent door

For decor near the central joint, the gap between the doors and the actual position of the overlays relative to each other are important.

Thickness of the decor

Three versions differ by C:

• 7 mm;
• 9 mm;
• 12 mm.

That is, the transition from 50 to 87 mm increases not only the width and height, but also the projection of the decor from the facade plane.

N-318L and N-318R 50×50×7 mm: compact paired composition

The smallest version is 50×50×7 mm.

Cost of the pair N-318L + N-318R:

Beech Standard

2 × 1 320 = 2 640 ₽.

Beech Prestige

2 × 1 950 = 3 900 ₽.

Oak Standard

2 × 1 470 = 2 940 ₽.

Oak Prestige

2 × 2 160 = 4 320 ₽.

The compact pair makes sense to consider if the free field is limited or the carved motif should remain secondary relative to handles, panels, and other facade elements.

But this cannot be turned into a rule of “50 mm for a small cabinet.” The decision is made based on a full-size mock-up of specific doors.

N-318L and N-318R 65×65×9 mm: medium scale of the pair

The medium version is 65×65×9 mm.

Pair price:

Beech Standard

2 × 1 660 = 3 320 ₽.

Beech Prestige

2 × 2 320 = 4 640 ₽.

Oak Standard

2 × 1 680 = 3 360 ₽.

Oak Prestige

2 × 2 450 = 4 900 ₽.

The difference between 50 and 65 mm seems small in numbers, but in composition three parameters grow at once: width, height, and thickness.

Therefore, the phrase:

“Let's take the average size, it's universal”

is better not to use.

The average size also requires fitting on a specific pair of facades.

N-318L and N-318R 87×87×12 mm: large carved motif

The largest current version is 87×87×12 mm.

Pair price:

Beech Standard

2 × 1 910 = 3 820 ₽.

Beech Prestige

2 × 2 750 = 5 500 ₽.

Oak Standard

2 × 2 010 = 4 020 ₽.

Oak Prestige

2 × 2 770 = 5 540 ₽.

Compared to 50×50×7, the following increase:

• width — from 50 to 87 mm;
• height — from 50 to 87 mm;
• thickness — from 7 to 12 mm.

Therefore, the visual difference is not just "plus 37 mm." A large pair has a stronger impact on the rhythm of the facade and protrudes more noticeably from the surface.

Buy decorative overlays for furniture: the mockup should be made as a pair at once

For N-318L and N-318R, a full-size paper mockup is especially useful.

But printing one label and applying it alternately to two doors is not enough.

You need to make two separate silhouettes of the selected size and place them simultaneously.

Check the furniture:

• strictly from the front;
• from about one meter away;
• from the main viewpoint of the room;
• with one door open;
• with both closed;
• with the main lighting on.

If you need buy decorative overlays for furniture, such a fitting helps to understand not only the size of each SKU, but also the overall rhythm of the pair.

How to mark out the pair on the facades before ordering

Before purchasing, it is useful to create a separate F1/F2 layout.

For example:

Leaf F1 — N-318L, center X=___, Y=___

Leaf F2 — N-318R, center X=___, Y=___

Then, on each facade, check the same indents to the frame, handle, and central joint.

If the facades are mirror-organized, the numbers may match. But this is not a reason to replace the article numbers with a common name.

When opening the leaves, you need to ensure that the relief of 7, 9, or 12 mm does not conflict with the adjacent element. This is especially important for the large version 87×87×12 mm.

Such markup turns a purchase from "two beautiful overlays" into a precise furniture specification.

Example: two doors of 450 mm each and overlays of 65 mm

Suppose the width of each door is 450 mm.

One 65 mm overlay is installed on each.

If the decorative element is centered across the width of the sash, the free margin is:

450 − 65 = 385 mm.

With symmetrical centering:

385 / 2 = 192.5 mm.

That is, by nominal dimension, approximately 192.5 mm remains on each side.

But this calculation does not indicate where N-318L should be and where N-318R should be. The article numbers are still assigned according to the drawings.

And it does not account for the handle, panel, or other real facade elements — these are checked separately.

Beech or oak: in a paired composition, the material must match deliberately

Both cards allow selecting beech or oak.

For a paired composition, a proper specification looks like this:

N-318L / beech

N-318R / beech

Or:

N-318L / oak

N-318R / oak

Bad:

N-318L / beech

N-318R / material not specified.

Even if the overlays are to be painted with opaque enamel, the material remains an order parameter.

Mixing beech and oak is only possible as a deliberate decision, not because one line was accidentally processed separately from another.

Standard or Prestige: a pair cannot be assembled from two randomly different finishes

Both Standard and Prestige are available for both overlays.

Standard — machine polishing.

Prestige — more detailed manual processing.

If two elements are placed side by side on adjacent doors, it is reasonable to decide in advance whether the entire pair should be Standard or the entire pair should be Prestige.

For example, for 65×65×9 made of beech:

Standard pair — 3,320 RUB;

Prestige pair — 4,640 RUB.

The difference:

1,320 RUB per pair.

For oak:

4 900 − 3 360 = 1 540 ₽.

This is already a separate budget decision. It is better to make it before ordering rather than accidentally receiving one SKU in Standard and another in Prestige.

N-318L and N-318R “Under enamel”: the color is approved as for one set

In the basic configuration, the cards show “Under enamel.”

This means preparation for an opaque finish, not a ready color.

On adjacent panels, the slightest difference is more noticeable than on two pieces of furniture in different rooms.

Therefore, for a pair, it is advisable to use one finishing card:

• one primer;
• one enamel;
• one color code or physical color sample;
• one gloss level;
• one application technology;
• one control sample.

If the first overlay is painted today and the second a month later, the finish data must be saved.

What to write in the order so the pair doesn't turn into "two overlays"

The worst line:

N-318 — 2 pcs.

It hides almost everything.

Normal specification:

N-318L / 65×65×9 mm / beech / Prestige / For enamel / 1 pc. / position F1

N-318R / 65×65×9 mm / beech / Prestige / For enamel / 1 pc. / position F2

If a larger version is purchased:

N-318L / 87×87×12 mm / oak / Standard / 1 pc.

N-318R / 87×87×12 mm / oak / Standard / 1 pc.

This way the invoice can be checked literally line by line.

How to check the invoice before paying for a pair

The commercial proposal should show:

If instead of two SKUs in the invoice, one SKU with quantity 2 appears, this is a reason to stop payment and clarify the order.

Not because two identical parts are necessarily "bad," but because the original paired specification was different.

If three identical cabinets are ordered: first, one pair is approved

Suppose the project has three identical cabinets with two doors each.

One pair is needed for one cabinet:

N-318L + N-318R.

For three cabinets:

3 N-318L + 3 N-318R.

Only six overlays in total, but that doesn't mean:

N-318 — 6 pcs.

For 65×65×9 made of beech Prestige, the product cost:

6 × 2 320 = 13 920 ₽.

But the order must still contain two separate lines of three pieces each:

N-318L — 3 pcs.

N-318R — 3 pcs.

This way, an error in one article number does not scale to the entire furniture series.

Buy carved furniture overlays as a pair at once or first one

If the task is only about choosing the scale, it is not necessary to buy a physical part first: a full-size paper mock-up already allows filtering out clearly unsuitable sizes.

If the project is specifically a pair, ordering one N-318L or one N-318R does not allow you to fully assess the final composition.

Once the size and orientation are confirmed, it makes more sense to order the matching pair.

But before paying, you need to check the current status of both cards and the specific version: availability, material, finish, and lead time.

What to do if one of the paired overlays has already been purchased

Let's imagine that N-318L has already been ordered and delivered, while N-318R has not yet arrived.

Before placing the second order, you should not rely on memory.

They raise:

• exact size;
• the material;
• Standard or Prestige;
• preparation;
• the future finish;
• the drawing of the first item.

After that, N-318R is ordered with a matching specification, if the project hasn't changed.

If the first part has already been painted, it's useful to keep a color sample so the paired overlay doesn't differ in shade or gloss.

Acceptance of N-318L and N-318R before painting and installation

After receiving the pair, do not immediately send the parts for finishing.

First, check:

• Did both articles arrive?
• whether the size is the same;
• does the material match;
• Are Standard/Prestige the same?
• whether there is any transport damage;
• Does the pair match the project drawing?

Then both plates are simultaneously applied to the facades without final fastening.

This is the last safe moment to notice an error in size, article, or orientation before the final enamel and installation.

Repeat order after a year: we keep the pair's passport

If N-318L/N-318R are used on serial furniture or future additions are possible in the project, it is useful to keep a short passport:

In a year, this document is more useful than a photo of a finished cabinet. It allows you to restore the original specification without having to re-select a "similar N-318" from scratch.

Why pairing should be checked not only from the front, but also when opening the doors

On a closed cabinet, two overlays may look perfect. But furniture is used in motion.

If the decor is located close to the central joint, when one door opens, the viewing angle changes and the thickness of the element becomes noticeable. For three sizes of N-318, it is 7, 9, and 12 mm.

Before final ordering, it is useful to simulate:

• both doors closed;
• only F1 open;
• only F2 open;
• both doors open;
• the hand takes the handle next to the plate.

This does not mean that N-318L or N-318R interfere with opening. The cards do not support such a conclusion. Verification is needed because the actual placement of handles, hinges, and decorative elements is determined by the specific furniture.

The identical size of a pair should be recorded in two lines, not one common one

Suppose the designer chose 87×87×12 mm.

Incorrect:

N-318L/R / 87 mm / 2 pcs.

Better:

N-318L / 87×87×12 mm / oak / Prestige / 1 pc.

N-318R / 87×87×12 mm / oak / Prestige / 1 pc.

Why is this important? Because during a subsequent reorder, return, replacement of one damaged part, or configuration of a second cabinet, you can accurately determine which article number is needed.

Pairing is a connection of two independent items, not their transformation into one conditional SKU.

If one overlay gets damaged after several years

After use, it may be necessary to replace only one element of the pair.

If the archive contains the line "N-318 — 2 pcs.", determining the required SKU will be more difficult.

If the passport is saved:

F1 — N-318L / 65×65×9 / beech / Prestige

F2 — N-318R / 65×65×9 / beech / Prestige,

local replacement becomes clearer.

The new element will still have to be re-verified against the current card, price, and finish, but the original SKU is known.

This is another practical reason to properly document the pair already at the first purchase.

One control photo before payment saves from confusion in article numbers.

After assigning N-318L and N-318R to the leaves, it is useful to take a frontal photo or a screenshot of the working drawing and label both article numbers on it. This diagram can be attached to the order and saved together with the invoice.

This way, the kit assembler, furniture maker, and installer see the same version of the project. If later one line in the correspondence gets lost or someone shortens the name to "N-318," the visual diagram will still show which SKU refers to F1 and which to F2.

For paired decor, this is a simple check that takes minutes but reduces the risk of receiving two identical items instead of an agreed pair.

When N-318L and N-318R do not need to be purchased as a pair

Pairing is not mandatory just because two article numbers exist.

There is no need to automatically order both SKUs if:

• only one door is intentionally decorated;
• the furniture composition is asymmetrical;
• on the second leaf, the element conflicts with the handle;
• there is not enough free space;
• the selected size overloads the facade;
• the designer uses a different pattern on the second side;
• the project does not imply a cohesive composition at all.

That is, the article does not turn N-318L and N-318R into a mandatory set for any cabinet.

Mistakes when purchasing N-318L and N-318R

Mistake: ordering two N-318L or two N-318R just because the fronts are the same. A paired project requires checking two independent SKUs.

Mistake: deciphering L/R without a drawing. The article is assigned to a specific position after checking the diagrams.

Mistake: writing only "N-318 65 mm". The full article number and size 65×65×9 mm are required.

Error: select size for one door. The paired composition must be viewed on both facades at once.

Error: mixing beech and oak randomly. Material is fixed separately for both items.

Error: mixing Standard and Prestige without designer's decision. The pair must have a deliberate production specification.

Where to buy wooden decor for furniture and N-318L/N-318R separately

If the model is not yet selected, you can buy furniture decor through the general catalog of decorative overlays.

If a specific first item is needed — opens carved wooden overlay N-318L.

If a related second item is needed — carved wooden overlay N-318R.

After selecting the size, material, and finish, it is better to place both lines in a single order or at least in one coordinated specification.

Questions before purchasing N-318L and N-318R

What sizes are available for N-318L?

50×50×7, 65×65×9, and 87×87×12 mm.

Are the same sizes available for N-318R?

Yes, the current card shows the same size chart.

Can I buy N-318L in oak?

Yes.

Can I order N-318R in beech?

Yes.

Are Standard and Prestige available?

Yes, for both models.

How much does a pair of 50×50×7 in beech Standard cost?

2,640 RUB at current product prices.

How much does a pair of 65×65×9 in oak Prestige cost?

4 900 ₽.

How much does a pair of 87×87×12 in beech Prestige cost?

5 500 ₽.

Can I order only one of the two items?

Yes, the cards are standalone products. The need for a pair is determined by the project.

How do I know where to place N-318L and where N-318R?

According to the drawings of specific products and the facade scheme, not just by the letter designation.

How long does it take to produce a custom order?

The average time indicated on the cards is 5–10 days.

Do I need to paint both overlays together?

If they are placed side by side in a paired composition, a unified finishing system reduces the risk of differences in color and gloss.

Where can I buy N-318L?

In the N-318L STAVROS card.

Where to buy N-318R?

In the N-318R STAVROS card.