Black handles for the dresser are already approved, and MN-199 comes with a brass tip: how to order wooden furniture legs and not end up with a random mix of metals

In the dresser project, everything is already agreed upon: the body will be painted, the handles will be black, and the rest of the visible hardware will also be black. For the base, the designer chooses turned wooden legs and settles on MN-199. At first glance, everything is simple: the model is sold in the section of unpainted legs, meaning the wooden part can be finished to match the body color. But there is another parameter in the product card that is easy to miss: MN-199 comes with a decorative metal tip in "brass" color.

This changes the task. The question is no longer just whether the leg shape suits the dresser and which wood species to choose. It is necessary to understand whether the brass tip is truly intended as a second visible metal in the project or if it appeared accidentally only at the purchasing stage.

Black handles and a brass tip can work together. The combination itself is not a mistake. The mistake occurs when the entire project is approved in one metal color, and brass appears in the furniture without approval—simply because the purchaser did not notice it in the specific leg's product card.

Therefore, before turned leg with metal decor MN-199 add to cart as a set, need to separately specify: wood material, finish of the wooden part, color of the decorative tip, and mounting hardware.

Go to Catalog

Turned wooden leg MN-199: which metal element is already included in the product

The current MN-199 card shows one size configuration:

195×74×39 mm.

Materials:

• Beech;
• Oak.

Sanding:

Prestige.

For the selected beech item, the preparation is specified:

Under enamel.

Current price:

Version MN-199	Price
Beech / Prestige / For enamel	2 750 ₽
Oak / Prestige	3 810 ₽

The card directly indicates that the leg is supplied with a decorative metal tip in "brass" color.

This is fundamental: the tip is not a random accessory in the photo and does not belong to the "can be purchased separately" block. It is described as part of the MN-199 itself.

For mounting, the manufacturer separately recommends FUR-001-1, FUR-001, and FUR-012. These items already belong to mounting hardware, not to the decorative tip.

Therefore, the base purchase line should include not only wood:

MN-199 / 195×74×39 mm / beech or oak / Prestige / finish of the wooden part ___ / decorative metal tip — brass / quantity ___ pcs.

If the task is still at the selection stage, you can buy furniture legs through the general category. But if MN-199 is already approved by form, then you need to check its completeness and metal further.

An unpainted furniture leg MN-199 does not mean 'without metal decor'

The section name "unpainted legs" can be easily read too broadly.

The buyer sees:

unpainted leg;

and concludes:

means all visible parts can later be brought to the desired color.

This is incorrect for MN-199.

The wooden part of the product is unpainted. The presence of a decorative brass tip does not change this.

Therefore, the entry:

wooden leg for painting

too short.

It hides the parameter that could cause a conflict with black handles.

More correctly:

wooden leg MN-199 / for finishing / with decorative brass-colored tip.

Thus, a designer, a purchaser, and a painter equally understand that wood and metal are two different parts of one product.

Our factory also produces:

View Full Product Catalog

Black furniture handles and a brass tip: a mistake or a deliberate contrast

The combination of black and brass is not prohibited in itself.

There are two completely different scenarios.

Scenario 1 — the contrast is intentional

The interior already has brass elements:

• lighting fixtures;
• mirror frame;
• decorative inserts;
• metal furniture decor;
• other exposed details.

Then the brass tip MN-199 can become part of the overall system.

Black handles remain a separate metal accent, and the interior deliberately works with two finishes.

Scenario 2 — brass appeared by accident

The specification states:

all visible metal is black.

The visualization also has no warm metal accent.

MN-199 is chosen only by shape.

The brass tip is noticed already in the product card before payment.

In this case, the purchase should be stopped and the question returned to the designer.

The problem is not in "incompatible colors," but in the fact that the product changes the already approved system of visible hardware.

When it makes sense to buy MN-199 with a brass tip

MN-199 can be confidently kept in the project if brass does not conflict with the overall specification.

Before purchasing, it is useful to look not at one dresser in isolation from the room, but at the map of all visible metal.

For example:

Element	Color / finish of visible metal
Dresser handles	Black
MN-199 tips	Brass
Luminaire	brass / black
Mirror frame	___
Decorative inserts	___
Other exposed hardware	___

If brass is repeated in at least other noticeable elements and this contrast is truly approved, MN-199 doesn't look random.

If the line with tips remains the only warm metal in the entire project, it's worth checking whether this was the designer's intention.

When it's better not to order MN-199 before additional approval

There are several obvious red flags.

The project states "all visible metal is black."

Then the brass tip requires approval.

The client specifically requested cold metal.

For example, stainless steel or another silver finish.

The designer did not see the specific card MN-199.

He could choose the shape based on the image without detailing the lower metal part.

The visualization shows a fully wooden leg.

Then the actual product differs from the visual solution.

The color of the tip is not specified in the specification.

This means the parameter is not yet fixed.

In all these cases, the buyer should not decide:

"brass still looks fine."

Their task is to detect the discrepancy and get confirmation.

Can I order MN-199 with a black, steel, or chrome tip?

The current MN-199 card confirms only one color of the decorative tip:

brass.

It does not show standard options:

• black;
• chrome;
• nickel;
• stainless steel;
• bronze of a different shade.

Therefore, the article should not promise such executions.

If the project requires a different metal, the correct path is:

1. specify the required color;
2. send a request to STAVROS;
3. receive confirmation of the possibility of a custom finish;
4. get price and lead time;
5. only then add the option to the specification.

Until the manufacturer confirms the change, the working version of MN-199 remains with a brass tip.

Beech MN-199 under enamel: the wood can be changed in color, the metal — not automatically

For the beech MN-199, the card shows the preparation "Under enamel".

This gives freedom regarding the wooden part.

For example, it can be designed:

• in the color of the body;
• in a white palette;
• in a dark palette;
• in a contrasting opaque color.

But changing the wood color does not automatically change the metal tip.

Let's imagine a dark graphite dresser.

The wooden part MN-199 is painted in the same graphite.

The bottom tip remains brass.

As a result, the contrast of the metal becomes even more noticeable.

That is why the final appearance should be evaluated not by the raw product card, but by the combination:

body color + leg color + brass tip + handles.

Oak furniture leg MN-199: open texture and brass accent

The oak version costs 3,810 ₽.

If the wood remains visually readable, the metal tip works not next to a painted surface, but next to the natural texture.

In this scenario, you need to coordinate:

• the future finish of the oak;
• the shade of the handles;
• the presence of other metals;
• the degree of contrast between the wood and the brass.

The article should not turn into a general debate of "beech or oak." For the current topic, the wood species is secondary.

The main question remains the same:

what role does the brass tip play in the overall furniture system?

Four MN-199 for a dresser: how much does a set of beech and oak cost

Let the dresser design already include four such legs.

Beech

4 × 2 750 = 11 000 ₽.

Oak

4 × 3 810 = 15 240 ₽.

The difference:

15 240 − 11 000 = 4 240 ₽.

This amount applies only to the four legs.

Separately, the following may be required:

• mounting hardware;
• finishing;
• installation work;
• delivery.

The cost of mounting kits cannot be automatically included in the price of MN-199, because the product card shows them as recommended separate items.

Visible decorative tip and mounting hardware are different metals for different tasks.

MN-199 has two different metal layers.

Decorative

This is a brass tip that is part of the leg's appearance.

Mounting

This is the fastener that connects the leg to the furniture structure.

The card recommends FUR-001-1, FUR-001, and FUR-012.

They cannot be mixed into one task.

If the designer says:

"all visible metal must be black,"

they are referring to the decorative part.

The hidden mounting pin does not have to match the color of the handles.

Conversely, the presence of the metal FUR-001 does not solve the issue of the brass tip MN-199.

FUR-001 mounting kit: what it is and why it does not replace the tip

Fastening kit FUR-001 — a separate mounting position.

The current price is 117 ₽ per kit.

It is designed for attaching a furniture leg.

This is not a decorative part or a color accent of the dresser.

If the designer confirms one set of FUR-001 for four legs, the product cost is:

4 × 117 = 468 ₽.

But the mounting scheme itself must be confirmed by a furniture maker based on the specific dresser's construction.

The article does not assign FUR-001 universally just because it is recommended by the product card.

Set FUR-012: another mounting alternative, not a second tip

Fastening kit FUR-012 also recommended for MN-199.

Current price — 152 ₽.

If four kits are confirmed by the project for four legs:

4 × 152 = 608 ₽.

The FUR-012 description specifies a round mounting plate and an M8×60 stud.

But here too, functions need to be distinguished:

FUR-012 = mounting;

brass tip MN-199 = decorative metal.

The color of handles should not dictate the choice of hidden fasteners unless the project imposes a separate requirement for them.

How not to confuse decorative hardware and fasteners in the estimate

Bad specification:

MN-199 — 4 pcs.
metal parts — 4 pcs.
fasteners — as required on site.

From it, it is unclear what is already included in the product.

Better:

MN-199 / 4 pcs. / decorative brass tip — included in the leg structure.

Separately:

Mounting kit: FUR-001 / FUR-012 / other solution — according to the confirmed furniture maker's scheme.

This way, the buyer does not try to purchase the decorative tip separately and does not consider the mounting kit part of the external design.

If required Buy hardware for furniture legs, this is done as a separate line after the mounting scheme is approved.

Wooden furniture handles and MN-199: first, the visible hardware map

If the handles have not been purchased yet, you can go in the opposite direction: first approve MN-199, and then select hardware that will support the overall system.

But here it is important not to force the handles to "adapt" to the leg at any cost.

Catalog where you can buy wooden furniture handles, it's needed as a separate point of choice.

If the project already strictly requires black handles, changing them just for the brass tip MN-199 may be unreasonable.

Then it is simpler to re-check the leg model itself.

If the project is flexible, the combination can be built deliberately.

Leg for a dresser, nightstand, sofa, or cabinet: how noticeable is the brass tip

The MN-199 card lists applications for:

• nightstands;
• dressers;
• sofas;
• wardrobes.

But the visibility of the tip depends on the specific furniture.

On one dresser, there is a large open gap between the floor and the body, and four brass tips are clearly visible.

On another nightstand, the legs are below the line of sight, and the dark floor reduces contrast.

Therefore, before ordering, it is useful to assess:

• the height of the body;
• the openness of the space underneath;
• the color of the floor;
• the viewing distance;
• the number of repeating legs;
• Lighting.

It cannot be stated in advance:

"brass will be barely visible"

or

"it will become the main accent."

This is verified on specific furniture.

Four identical MN-199: why you first need one reference set

If there is one dresser, the task is relatively simple.

If a furniture series includes several identical items, you cannot immediately multiply the number of legs until one reference set is approved.

For one furniture unit, check:

• beech or oak;
• wood finish;
• brass tip;
• combination with handles;
• mounting hardware.

After that, the specification can be scaled.

For example, for three identical dressers with four legs each:

3 × 4 = 12 MN-199.

Cost:

Beech

12 × 2 750 = 33 000 ₽.

Oak

12 × 3 810 = 45 720 ₽.

If brass was not approved on one dresser, the error will simply be multiplied by twelve items.

How to write MN-199 into the specification without losing information about the metal

Full line:

MN-199 / 195×74×39 mm / beech or oak / Prestige / finish of the wooden part ___ / decorative metal tip — brass / quantity ___ pcs. / fasteners ___

Bad:

wooden leg 195 mm — 4 pcs.

It loses:

• article number;
• wood species;
• the quality of sanding;
• preparation;
• decorative tip;
• mounting hardware.

For the buyer, this is no longer a specific SKU, but a general description.

If you need buy wooden legs for furniture, the category is useful before selection. After selecting MN-199, the full line should remain in the invoice.

What to send to the designer before paying for MN-199

Short approval form:

MN-199 selected, size 195×74×39 mm. Wooden part — beech/oak, finish per project. Decorative brass-colored tip confirmed in the card. Dresser handles are black. Confirm: do we keep brass as the second visible metal or choose another solution for legs/custom execution?

Such a question removes ambiguity.

No need to discuss interior styles in general.

Need to get one answer:

brass approved / not approved.

How to check the combination of black handles and brass tips before ordering the entire batch

If it is difficult to tell from the visualization whether the combination will look intentional, you do not have to immediately order twelve or sixteen MN-199.

First, you can approve one reference furniture unit:

• a facade sample in the real color;
• actual black pen;
• one MN-199;
• selected wood finish option;
• real floor background or its sample.

This way the designer sees not abstract 'black + brass', but a specific combination of materials at the right scale.

This is especially useful if the leg is below eye level. In a render, the metal tip may almost disappear, but in a real interior, side light makes it more noticeable. The opposite situation is also possible: in a large product photo, brass seems to be the main accent, but on the finished dresser it occupies a small part of the overall composition.

Therefore, before bulk purchasing, they check the actual visibility of the tip.

If, after such a trial, the brass looks random, it is cheaper to discover this on a single sample than after purchasing the full batch.

What to write to a painter or furniture workshop if the wooden part of MN-199 is to be enameled

For the beech version, it is better to separate the wood finish and the decorative metal in the production specification.

Can be written:

MN-199 / wooden part — enamel ___ / decorative tip — standard brass, do not change without separate approval.

This way, the craftsman does not make an independent decision to repaint the metal part just to match the body.

If the project truly involves changing the finish of the tip, the technology and feasibility of such execution must first be confirmed. Until then, brass remains part of the original product specification.

It is also useful to note that the final wood color is checked together with the handle and tip. This reduces the risk that each contractor sees only their own material: the painter — wood, the assembler — handles, the purchaser — legs.

If black handles are already purchased: what is cheaper to replace — handles or legs

There is no universal answer.

One cannot automatically say:

handles are cheaper, so we will replace them.

Or:

legs are more expensive, so we will keep MN-199 at any cost.

The full project needs to be compared.

If the handles are already installed on all facades and there are many of them, replacement can be expensive and affect the drilling.

If MN-199 is not yet paid for, and brass contradicts the whole concept, it makes more sense to reconsider the legs specifically.

If, however, the brass tip is well supported by the lamps or other details, no changes are required.

The decision is made based on cost and the visual system simultaneously.

One dresser is approved — how to scale MN-199 to a furniture series

Suppose, after checking one dresser, the following are approved:

• MN-199 made of beech;
• black handles;
• brass tip;
• a specific enamel color;
• a specific fastening assembly.

Only after this can the specification be copied to the remaining items.

For five identical dressers with four legs each:

5 × 4 = 20 MN-199.

Commercial cost of beech legs:

20 × 2 750 = 55 000 ₽.

For oak:

20 × 3 810 = 76 200 ₽.

At this volume, an error in the color of visible metal becomes not a minor design inaccuracy, but a problem for the entire batch.

That is why the decision to "keep brass" or "change MN-199" is best made on one reference item.

When it's better not to buy MN-199

You should not order MN-199 if the project requires strictly one color of visible metal and brass is not part of it.

You should not buy the model hoping to "repaint the tip later" if the manufacturer has not confirmed such a technology.

You should not assume that the "unpainted legs" section means the absence of a metal part.

It is not worth choosing MN-199 only by shape if the lower part is clearly visible on the furniture.

And it is not worth changing the approved black handles just because a brass tip was found. Sometimes it is more correct to reconsider the leg model.

Errors when ordering MN-199

Mistake: not noticing the tip in the product card. Consequence — brass appears after the approval of black hardware.

Error: assuming brass is automatically incompatible with black. The combination is acceptable if it is intended.

Mistake: ordering a "black tip" on your own. The current product card does not confirm such an option.

Mistake: confusing FUR-001 with a decorative part. It is a mounting kit.

Error: do not write metal into the specification. Otherwise, the next project participant may skip it again.

Error: do not multiply the set by the furniture series before approving one sample. A random color conflict scales to the entire order.

Final specification for four MN-199

If the designer confirms the brass accent and beech is selected:

MN-199 / 195×74×39 mm / beech / Prestige / Under enamel / decorative metal tip — brass / 4 pcs. / color of wooden part ___ / mounting kit ___

Leg cost:

11 000 ₽.

If oak is selected:

MN-199 / 195×74×39 mm / oak / Prestige / decorative tip — brass / 4 pcs. / wood finish ___ / fasteners ___

Leg cost:

15 240 ₽.

If brass is not approved, do not send such a line for payment yet.

Buy wooden furniture legs now or first approve the metal

Is brass already in the project?

→ MN-199 can be kept as part of the overall metal system.

Are black and brass used together intentionally?

→ Lock both metals in the specification and order them.

Should all visible metal be strictly black?

→ Do not pay for MN-199 until the tip issue is resolved.

Was the color of the leg metal not discussed at all?

→ Return the question to the designer.

Do we need a black, chrome, or steel tip?

→ Request the possibility of a custom version; the card does not promise such an option.

Only after this does it make sense to finalize buy furniture legs and supports and confirm the specific MN-199.

Questions before purchasing MN-199

What is the size of MN-199?

195×74×39 mm.

What wood is MN-199 made from?

in beech or oak.

What sanding is specified in the card?

"Prestige".

Can I order a beech MN-199 for enamel?

In the current card, the selected beech finish is shown as "Under enamel."

What color is the metal tip?

brass.

Is the decorative tip included with MN-199?

Yes, the card describes the leg as supplied with a decorative metal tip.

Can I order the MN-199 with a black tip?

The current card does not confirm such a standard option. The possibility of custom execution needs to be requested separately.

Is the MN-199 suitable for furniture with black handles?

It may fit if the combination of black and brass is deliberately approved in the project.

Can brass be automatically considered a mistake?

No. The mistake is not the color itself, but the uncoordinated appearance of a second metal.

Which mounting kits are recommended?

FUR-001-1, FUR-001, and FUR-012.

How is FUR-001 different from the brass tip?

FUR-001 is mounting hardware. The MN-199 tip is a decorative visible element of the leg.

Which furniture is MN-199 suitable for?

The card lists cabinets, chests of drawers, sofas, and wardrobes.

How much do four beech MN-199 cost?

11,000 RUB at the current price of the items.

How much do four oak MN-199 cost?

15 240 ₽.

Where to buy MN-199?

In the card of the turned leg with metal decor MN-199 STAVROS.