Furniture leg set KON-009

Furniture leg set KON-009 — a ready-made modular composition of natural wood for making decorative furniture supports 730 mm high. The set includes a wooden rod MLD-060 and four geometric shapes of different forms, selected by size, mounting diameter, and proportions.

The assembled leg has a distinctive elongated silhouette. In the upper part there are large oval elements, below — a compact spherical part and a thin separating module. This combination makes the support a noticeable part of the furniture design, but does not overload the structure with complex carved decor.

KON-009 is suitable for making consoles, dressing tables, writing desks, furniture cabinets, underframes, and custom interior items. The set can be used in the bedroom, dressing room, hallway, study, bathroom, or commercial interior. When installed in a damp room, wooden parts must be protected with a suitable moisture-resistant paint and varnish coating.

Dimensions of the KON-009 set

• total height A — 730 mm;
• maximum width B — 105 mm;
• diameter of the central axis D — 34 mm;
• material — solid beech or oak;
• grinding quality — «Prestige»;
• surface preparation option — for subsequent finishing or enamel painting;
• the set is supplied unassembled;
• manufacturing — made to order.

The height of 730 mm allows using KON-009 as a leg set for a table, console, vanity table, or cabinet. When designing the finished product, it is necessary to consider the thickness of the tabletop or body: the final height of the furniture will be equal to the height of the legs plus the thickness of the structure installed on top.

The maximum width of 105 mm corresponds to the largest geometric figure KN-003. Before ordering, it is recommended to check the position of the leg relative to facades, drawers, aprons, mounting plates, and other elements of the furniture body.

Furniture leg set composition

All elements of KON-009 have a compatible mounting channel with a diameter of 34 mm and are installed on the wooden axle MLD-060.

• wooden molding MLD-060 size 34 × 34 × 1000 mm — 1 pc.;
• geometric figure KN-001 size 110 × 88 × 88 mm, hole 34 mm — 1 pc.;
• geometric figure KN-003 size 175 × 105 × 105 mm, hole 34 mm — 1 pc.;
• geometric figure KN-005 size 66 × 76 × 76 mm, hole 34 mm — 1 pc.;
• geometric figure KN-009 size 22 × 62 × 62 mm, hole 34 mm — 1 pc.

The wooden molding MLD-060 serves as the central axis of the kit. During assembly, it is cut to the required length considering the height of the finished leg, the placement of geometric figures, and the chosen method of attachment to the furniture body.

Figure KN-003 forms the top large accent and determines the maximum width of the leg. KN-001 continues the oval geometry and creates a smooth transition to more compact elements. Figure KN-009 works as a thin decorative separator, and KN-005 completes the composition before the transition to the straight part of the axis.

Which furniture is KON-009 suitable for

The KON-009 kit is designed for furniture where supports must serve not only a structural but also a decorative function. The geometric leg pairs especially well with minimalist rectangular bodies, smooth facades, wall-mounted cabinets, and tabletops without complex decoration.

The kit can be used to make:

• legs for a console;
• supports for a vanity table;
• wooden legs for a desk;
• legs for a furniture cabinet;
• supports for a cabinet under a drop-in sink;
• underframes for a compact workstation;
• decorative vertical furniture elements;
• designer stands and interior structures.

In the KON-009 bathroom, it can be used as part of a furniture cabinet provided the frame is properly designed and a moisture-resistant coating is applied. Natural wood should not be in constant contact with water, so the ends, joints, and surface of the legs must be thoroughly protected.

For a console or vanity table, the set helps create a light visual image. The long straight part of the axis does not weigh down the furniture, while the group of oval details under the body forms an expressive accent. KON-009 looks especially impressive when using two or four identically assembled legs.

Beech furniture leg

Beech is suitable for projects where the leg is planned to be painted with opaque enamel. The wood has a fairly calm texture and allows for a smooth surface after preparation and application of the finish coating.

Beech legs KON-009 can be painted in white, black, burgundy, green, blue, gray, beige, or another color specified by the interior design. Individual geometric elements can be made contrasting, while the central axis remains neutral.

This option is suitable for modern furniture, children's rooms, dressing rooms, beauty salons, designer bathrooms, and interiors where it is necessary to precisely match the color of the supports to the facades, walls, or accessories.

Oak furniture leg

Oak is recommended when the finished product should retain the natural texture of the wood. Large oval elements show the solid wood pattern well after applying oil, stain, or clear varnish.

The oak set KON-009 can be combined with wooden countertops, veneered facades, oak mirror frames, wall panels, baseboards, and other natural wood details.

To change the shade, oak can be tinted. Light finishes are suitable for modern and Scandinavian interiors, dark ones for studies, classic spaces, art deco furniture, and expressive interior compositions.

Finishing options

The set is supplied with a "Prestige" sanding quality. The surface is prepared for subsequent decorative treatment, but before applying the final coating, it is recommended to perform a test assembly and check the fit of all shapes on the axis.

For finishing KON-009, you can use:

• wood oil;
• covering furniture enamel;
• stain or other tinting compound;
• clear or tinted varnish;
• patina;
• a combination of several colors;
• a mix of painted and tinted elements.

Oil emphasizes the natural texture of beech or oak and preserves the visual warmth of natural wood. Enamel allows you to completely change the color of the set and use the legs in bright modern interiors. Stain and clear varnish are suitable for projects where the wood grain should remain visible.

All elements can be finished in one color or individual shapes can be highlighted. For example, make the large top part burgundy, the middle one white, the thin separator black, and leave the central axis light. For a calmer solution, the entire set is painted in a single color, and the geometry is revealed only through volume and shadows.

How to assemble the KON-009 furniture leg

Before final assembly, it is recommended to lay out the elements in the design sequence and do a dry fit without glue. Check the overall height, the position of each shape, the distance to the furniture body, and the identical orientation of parts on all legs.

Main installation stages:

1. Cut the wooden rod MLD-060 to the required length.
2. Clean the mounting surfaces from dust after sanding.
3. Sequentially install figures KN-003, KN-001, KN-009, and KN-005 on the axis.
4. Mark the position of each element.
5. Apply wood glue to the surfaces to be joined.
6. Return the figures to the marked position and check alignment.
7. Secure the elements until the glue is fully polymerized.
8. After drying, remove any glue residue and perform final finishing.

For joining wooden parts, it is recommended to use PVA glue class D3 or another suitable composition for joinery. During drying, elements can be temporarily secured with painter's tape. If necessary, additional use of micro-pins is allowed, if provided by the furniture manufacturing technology.

Large geometric figures can be used as connecting elements. Two parts of a wooden axis can be glued into them if a longer vertical structure needs to be assembled. This solution should take into account the direction of the load and the method of further fastening of the product.

Why it is better to paint after assembly

It is recommended to perform the main painting or tinting after the complete assembly of the set. A thick layer of paint or varnish inside the mounting channel can reduce the working diameter of the hole and make it difficult to install the figure on the MLD-060 axis.

If parts need to be painted in different colors before assembly, the mounting holes must be protected with masking tape, plugs, or other means. After coating, check that the 34 mm mounting diameter is preserved.

Special attention must be paid to the ends, connection points of parts, and the bottom of the leg. When using furniture in a bathroom or other high-humidity room, the protective coating must be applied evenly on all sides.

Can the composition of the set be changed

KON-009 belongs to the STAVROS wooden construction system. The number and sequence of shapes can be changed if required by the furniture project. Individual elements can be excluded, swapped, or supplemented with other compatible shapes with a 34 mm mounting hole.

When changing the standard composition, it is necessary to recalculate:

• total leg height;
• length of straight sections of the axle;
• placement of large shapes;
• distance to the apron or furniture body;
• method of fixing individual elements;
• stability and symmetry of the finished product.

For a set of several legs, it is recommended to first fully assemble one control support. After checking the dimensions, the remaining axes can be marked based on it and the arrangement of elements repeated.

Features of attachment to furniture

The KON-009 kit forms a decorative vertical support, but the method of its attachment to the furniture body is selected separately. The fasteners depend on the material of the tabletop or cabinet, the weight of the product, the number of legs, the presence of aprons, and the expected load.

For a table, console, or cabinet, an upper mounting plate, metal plate, threaded rod, joinery connection, or additional frame may be required. The exact solution should be determined by a furniture specialist, taking into account the design of the finished product.

When using two front legs together with attaching the body to the wall, it is necessary to calculate in advance the installation height and the position of the fastening elements. For freestanding furniture, it is important to ensure spatial rigidity and stability of the structure.

Advantages of the KON-009 kit

• a ready-made composition of compatible wooden elements;
• height 730 mm for tables, consoles, and furniture cabinets;
• expressive combination of oval and rounded shapes;
• solid beech or oak array;
• single mounting diameter 34 mm;
• "Prestige" sanding quality;
• possibility of painting, tinting and oil coating;
• ability to change the composition and sequence of figures;
• suitable for making paired and symmetrical supports;
• supplied disassembled and convenient for subsequent finishing.

The main advantage of KON-009 is the pre-selected proportions of all elements. The buyer does not need to independently search for figures with compatible holes and check if they fit the central axis. All parts of the kit are designed for installation on MLD-060 molding with a diameter of 34 mm.

How to order the KON-009 kit

The KON-009 furniture leg kit is made to order from beech or oak solid wood. The average production time is 5–10 days. If the product is in stock, shipment from the warehouse is carried out within three working days. Delivery is carried out throughout Russia by the transport company CDEK.

Before placing an order, it is necessary to determine:

• number of furniture legs;
• material — beech or oak;
• option for subsequent finishing;
• type of furniture for which the supports are intended;
• need to change the standard composition;
• method of attaching legs to the furniture body.

For a console or wall-mounted cabinet, two decorative front supports are usually used with additional attachment of the body to the wall. For a freestanding table or dressing table, four sets may be required. The exact quantity depends on the furniture design and the calculated load.

Buying a set of furniture leg KON-009 is worth it for a project where standard straight supports look too simple. The model helps create recognizable furniture with natural wooden details, expressive vertical rhythm, and the ability to individually choose material and color.

KON-009 combines a ready-made composition, precise dimensions, and the freedom of a modular constructor. The set is suitable for furniture manufacturers, designers, carpentry workshops, and private customers who need decorative wooden legs for a console, table, cabinet, or other custom interior item.