Buy carved wooden table base: compact STL-007 685 × 757 × 174 mm or large STL-008 804 × 750 × 252 mm — which to choose

Two carved bases in beech or oak — for an intimate classic table and a large architectural composition

Carved Skirt STL-007

from 1,085.22 $

Carved Skirt STL-008

from 1,735.11 $

Carved Skirt STL-011

from 2,063.55 $

Carved Base STL-012

from 1,565.84 $

STL-023 Base

from 372.20 $

Pedestal for Table STL-027

from 2,748.26 $

Pedestal for Table STL-041

from 595.67 $

Baseboard for Table STL-042

from 592.61 $

Go to Catalog

STL-007 or STL-008: short answer before ordering

STL-007 is worth buying when you need a relatively compact carved under-table measuring 685 × 757 × 174 mm, which supports the tabletop and the classic look of the table, but does not fill the entire space underneath it. STL-008 is better to choose for a spacious dining room, study, or formal living room, where the base measuring 804 × 750 × 252 mm should become an independent architectural accent. For STL-008, parameter A is larger by 119 mm, parameter D by 78 mm, and parameter B is almost the same: 750 mm vs. 757 mm for STL-007. This makes the models close in one dimension, but noticeably different in overall volume and visual presence.

Both models are made from beech or oak, available in "Standard" and "Prestige" finishes, supplied unassembled by default, come with connecting hardware, and are packed in a rigid box. Assembled and glued execution must be agreed separately. The tabletop size, its shape, permissible load, attachment method, stability, and final table height are checked according to DWG and design calculation — the large STL-008 cannot automatically be considered more durable just because of its increased size.

Buy compact carved under-table STL-007 Buy large carved under-table STL-008 Buy wooden furniture Choose base and tabletop

STL-007: A × B × D — 685 × 757 × 174 mm; beech or oak; "Standard" or "Prestige".

STL-008: A × B × D — 804 × 750 × 252 mm; beech or oak; "Standard" or "Prestige".

Delivery: exploded view, connecting fittings included, rigid packaging.

Assembled version: assembly and gluing are agreed separately when ordering.

Before purchasing: check the drawing, the actual contour of the base under the tabletop, legroom, attachment points, and the delivery route.

People want to buy a carved wooden table base not only for support under the tabletop. In classic and interior tables, the base is almost as visible as the surface. It defines the silhouette, distributes decorative weight, affects free legroom, and sets the scale of the entire composition. Therefore, the choice between STL-007 and STL-008 cannot be reduced to the phrase "small or large."

STL-007 and STL-008 are close in one parameter — 757 and 750 mm, but differ significantly in two others. Parameter A increases from 685 to 804 mm, parameter D from 174 to 252 mm. On the plan, the difference may seem moderate, but under a real tabletop, STL-008 takes up noticeably more space and draws more attention to the central carved pattern.

Both models allow you to choose beech or oak, "Standard" or "Prestige," disassembled delivery or separately agreed assembled version. Therefore, the comparison is clean: the buyer primarily evaluates the scale of the base, its relation to the tabletop and interior, rather than trying to simultaneously understand different materials and configurations.

The broad query "buy wooden table base" should lead to the catalog of table basesThis article addresses a more specific question: which carved table base to choose — the compact STL-007 or the architecturally prominent STL-008.

Watch video ...

What is a carved table base and why it defines the table's appearance

The underframe is a ready-made base onto which the tabletop is installed according to a confirmed mounting diagram. In carved models, the structural part is combined with the decorative one: supports, the central node, and connecting elements form a complete classic silhouette. The buyer does not need to separately select random legs and try to connect them with homemade aprons, but they are still responsible for checking compatibility with the specific tabletop.

Our factory also produces:

Baseboard for Table STL-026-2

from 475.39 $

Table base for STL-026-3

from 378.45 $

Baseboard for Table STL-026-5

from 484.57 $

Table leg STL-015

from 5,430.32 $

Base for table STL-020

from 2,746.86 $

Table pedestal STL-020-1

from 2,382.82 $

Baseboard for Coffee Table STL-035

from 850.40 $

Coffee Table Base STL-036

from 1,226.68 $

View Full Product Catalog

The base does not equal a finished table

STL-007 and STL-008 are sold as table bases. The tabletop, its attachment, final assembly, and finishing must be arranged separately. The base size should not be perceived as a confirmed size of the finished table or a promise of compatibility with any round, oval, or shaped surface.

The carving is located in the central viewing area

In a regular table, attention often goes to the tabletop edge and legs. In STL-007 and STL-008, the carved unit occupies the central space. The larger the D parameter and overall volume, the more the base is visible from the side and diagonally. This is why STL-008 is more noticeable even with a similar B parameter.

The table base affects legroom

A large carved element can reduce the free space under the table. This does not mean that STL-008 is uncomfortable, but it needs to be checked together with chairs, seating positions, and the future tabletop. A photo without a person does not show real ergonomics.

The table base sets the scale of the room

STL-007 is easier to integrate into a study, bedroom, intimate dining room, and living room with rich decor. STL-008 is more appropriate where the table should be the centerpiece: in a spacious dining room, formal living room, hall, or executive office.

The ready-made base simplifies the selection of a set

The buyer receives a coordinated carved form and connecting hardware. It remains to choose the wood species, sanding, finish, tabletop, and delivery format. This route is more reliable than assembling a classic base from random parts that do not match in proportions and mounting points.

Confirmed characteristics of STL-007 and STL-008

The characteristics show an important feature: the material, sanding, configuration, and delivery time of the models match. This means the buyer primarily chooses between two spatial scales. However, the dimensions themselves do not confirm the load, tabletop shape, or installation method.

STL-007: compact carved base for a lighter composition

STL-007 does not look minimalist: it is a full-fledged carved underframe with a pronounced classic character. Its compactness is relative and becomes apparent specifically in comparison with STL-008. The dimensions of 685 × 757 × 174 mm allow preserving decorativeness while leaving more visual space around the central node and under the tabletop.

When STL-007 looks proportional

The model is appropriate in a room where the table should be noticeable but not become an architectural object. An office, a bedroom with a workspace, an intimate dining room, a living room with dense furniture, and a small meeting corner are typical scenarios for a preliminary fitting of STL-007.

Why a compact base does not mean a small table

The size of the underframe cannot be directly translated into the dimensions of the tabletop. A large surface may look disproportionate and create unconfirmed load, while a too small one may almost completely cover the carved node. The table size is determined by the base drawing, fastening scheme, shape, and material of the tabletop.

More visual space

The D parameter of STL-007 is 174 mm versus 252 mm for STL-008. This difference is especially noticeable in a diagonal view. The compact central volume leaves more empty space, so the table is perceived as lighter next to chairs, a library, and other carved decor.

The tabletop remains an equal part of the composition.

With STL-007, the base and surface work together. Beautiful stone, wood, a shaped edge, or a painted tabletop do not turn into a neutral lid over dominant decor. This balance is useful when the client has already chosen an expressive surface material.

Intimate dining room

In a small dining room, a large base can visually shorten the passage and make the central area feel heavy. STL-007 is a better fit in advance if free space for chairs and movement should remain around the table. But ergonomics are confirmed by a plan with actual furniture dimensions.

Small study

The base can be used for a writing, conference, or interior table after checking the tabletop and seating. In a study, space for legs, a chair, a cabinet, and cables is important. A full-size mockup helps to understand whether the central carved part interferes with the work scenario.

Interior with active decor

When there is a carved library, panels, a large cornice, or decorative doors nearby, STL-007 reduces overall density. It does not compete with neighboring elements as strongly as a larger base, but retains the classic theme.

When STL-007 may get lost

In a spacious hall, large dining room, or under a very expressive tabletop, a compact option may appear insufficiently scaled. The problem cannot be automatically solved by increasing the surface: you need to compare both models in full size and evaluate the table from all sides.

For a light classical composition, you can choose STL-007 with dimensions 685 × 757 × 174 mm and separately coordinate the tabletop, finish, and delivery format.

STL-008: large underframe as an independent accent

STL-008 has a stronger impact on the final table's appearance. Parameter A is increased to 804 mm, D to 252 mm, while B remains close to STL-007. As a result, the base not only supports the tabletop but forms an architectural center beneath it. This is an advantage in a spacious room and a risk in a cramped one.

When STL-008 performs best

The model suits a dining room, formal living room, executive office, hall, large meeting space, and an interior where the table is viewed from all sides. It is important that enough free floor space remains around it and that neighboring furniture supports the scale.

The central carved element is more visible

The increased parameter D makes the base more noticeable from a side view. This is important for a round or oval composition where a person walks around the table. However, the exact shape of the tabletop cannot be assigned without DWG and checking the attachment points.

The base becomes the main element

STL-008 is chosen when the carved base should define the character of the table. The surface can support it with material, color, and edge, but should not completely hide or visually suppress the central part.

Spacious dining room

In a large room, STL-007 may seem insufficiently expressive, especially under a massive tabletop. STL-008 better holds the scale of a long wall, high ceiling, and large furniture. At the same time, passages and offsets are calculated according to the plan, not by general impression.

Formal living room

The table can be used as a central interior object, a console composition, or a place for entertaining guests. STL-008 is appropriate when the base is visible from the entrance and diagonally. If the table is placed flush against the wall, part of the advantage of the large volume is lost.

Executive office

A large base supports massive furniture, panels, and large doorways. However, work ergonomics remain more important than decor. You need to check the chair, seating position, cables, cabinets, and legroom.

When STL-008 overloads the interior

In a small room, an enlarged central volume can take up too much visual and physical space. If the table seems heavier than all the other furniture, it is better to return to STL-007 rather than try to lighten STL-008 with just a light color.

Why STL-008 cannot be considered an enhanced version

A larger dimension does not prove a higher load capacity. Stability depends on assembly, tabletop attachment, surface material, center of gravity, and floor. The card confirms dimensions and completeness but does not provide a universal load formula.

For a spacious dining room or formal table, you can choose STL-008 with dimensions 804 × 750 × 252 mm and coordinate the finished table project.

Why a close parameter B does not make models identical

Parameter B differs by only 7 mm: 757 mm for STL-007 and 750 mm for STL-008. A buyer might think the bases are almost identical and differ only in pattern. But A and D change noticeably, meaning the footprint, side view, free space, and visual weight change.

One dimension does not describe volume

For furniture, at least three measurements and the shape between extreme points are important. Two bases with close B can look completely different under the same tabletop. Therefore, comparison is done by outer contour and DWG.

Difference in A — 119 mm

Almost twelve centimeters change the base's relationship to the tabletop edge. STL-008 fills the space more, while STL-007 leaves more free area. The exact meaning of parameter A and its orientation are checked against the drawing, not assigned from a single line of dimensions.

Difference D — 78 mm

Almost eight centimeters are especially noticeable in the side projection. They can affect legroom, the passage next to the table, the view of the central thread, and the choice of surface shape. D cannot be considered a decorative digit without reference to the actual node.

The same tabletop will show different proportions

If you place the same surface layout over two contours, STL-007 will look more compact, and STL-008 will look denser and more architectural. But this is only a visual check. The technical compatibility of one tabletop with both models is not confirmed.

Different free floor clearance

A large base requires more space for chairs and walking around. The plan must show not only the edge of the tabletop but also the underframe contour. Otherwise, after assembly, it may turn out that the carved part interferes with the usual seating.

Comparison of models by customer tasks

How to check the room area before buying a table base

The table base is not evaluated separately, but together with the tabletop, chairs, and walkways. Even a beautiful base will be a mistake if the finished table blocks the route to the door, does not allow you to push back the chair, or looks too crowded next to other furniture. The room plan should show the entire set.

Apply the future tabletop

First, set the intended shape and outer contour of the surface. Do not finalize its size until the DWG and mounting are checked. For a preliminary assessment, you can use several paper options and compare which one matches the base.

Add the table base contour

On the floor, mark A, B, and D with painter's tape in the correct orientation according to the drawing. A simple rectangle will not show all the thread protrusions, so it is better to transfer the actual outer silhouette. For STL-008, it is especially important to see the enlarged central area.

Place the chairs

Chairs should be able to slide freely to and from the table for seating. The base contour should not fall into the habitual position of the legs. Check not only one side, but all intended locations.

Check the walkways in use

It is not enough to measure an empty room. Place the chairs in the pulled-out position and walk to the door, cabinet, window, and adjacent furniture. STL-008 may look good without chairs, but it can narrow the passage after guests are seated.

Compare the view from the entrance

STL-007 and STL-008 work differently at a distance. A compact base can almost disappear under a wide tabletop, while a large one can become the center of the composition. A photograph of the mockup at eye level helps assess the balance.

Consider the carpet

If the table is on a carpet, its size and pattern also affect perception. A carved base should not blend with an active ornament. The thickness of the covering is also considered when checking stability and final height, but specific tolerances are determined by the project.

Full-scale base mockup

A 1:1 mockup is needed not only for a small room. It helps to understand how the carving will look under a specific tabletop, where space for legs will remain, and how visible the base is from the side. Separate contours are made for two models.

Use DWG

Download the drawing and transfer the outer silhouette onto cardboard, paper, or lightweight sheet material. Do not call A, B, and D "width," "height," or "depth" without checking the orientation. Label each side on the mockup the same way as in the card.

Assemble the volume, not just the flat outline

A flat tape on the floor shows the footprint but does not convey the central carving. Several vertical cardboard planes help visualize STL-008 in volume and compare it with STL-007.

Add the tabletop at the design elevation

You can use a sheet of cardboard or a temporary panel. The height is set according to the calculated scheme, not by eye. This checks the edge, overhang, knee clearance, and overall silhouette.

Look from all sides

A round or oval table is walked around, so the base is seen diagonally. A rectangular desk is more often viewed frontally, but its side areas are important for seating. One angle does not reveal the model.

Leave the mockup for a day

Check it in the morning, evening, with the light on, and in real movement around the room. The first impression of a large carving may differ from everyday perception.

How to choose a tabletop for STL-007 and STL-008

The tabletop must match the base not only in size. Shape, thickness, material, weight, overhang, center of gravity, attachment points, and usage scenario are important. The product cards do not specify a universal surface size for each model, so a final dimension cannot be assigned without a drawing.

Start with the installation area

The DWG should show where the surface rests on the base and where fasteners are allowed. The tabletop must cover this area but not create an unverified excessive overhang. A shaped edge should not reduce the working area above the support points.

Compare the visual overhang

STL-007 typically requires a neat surface that does not hide the compact base. STL-008 visually supports a larger composition, but technical feasibility is still confirmed by calculation. The same overhang may look different due to differences in A and D.

Tabletop thickness

A thin surface makes the carved base visually heavier. A massive edge better supports STL-008 but increases weight and overall height. For STL-007, a too-thick tabletop may overwhelm the lighter silhouette.

Surface material

Wood, stone, composite, and other materials differ in weight and attachment method. The SEO scheme does not confirm compatibility of models with a specific material, so the choice is made by the designer. It cannot be guaranteed that any stone or solid surface is automatically suitable.

Edge

A carved, profiled, straight, or shaped edge changes the decorative density. An active edge near STL-008 may overload the table. STL-007 is easier to pair with an expressive surface, but the overall ornament must be coordinated.

Axis of the tabletop and base

Centers must align according to the design, unless asymmetry is intentionally intended. Misalignment affects stability and visual balance. Marking is done before drilling.

General principles are covered in the material how to choose a table base.

Round tabletop

The round shape allows viewing the carved base from all sides and makes the central composition especially noticeable. However, a round shape is not automatically compatible with STL-007 or STL-008. The diameter, mounting area, and seating positions are checked according to the design.

STL-007 under a round surface

A compact base leaves more air around the perimeter and can appear lighter. If the diameter is too large, the table base will get lost, and the overhang will become visually and technically questionable. A mockup is needed.

STL-008 under a round surface

A large central node is well perceived when walking around. The base can support a formal appearance, but the legroom between protrusions must be checked for each seating position.

Number of seating positions

It cannot be determined solely by diameter. Supports and the carved center may occupy knee space. A full-scale plan with chairs is more important than an abstract number of seats.

Oval tabletop

The oval combines a long axis and soft ends. It can visually elongate STL-007 or give STL-008 a more formal character. The mounting points and center of gravity must align with the base.

STL-007 in the chamber dining room

A small oval can create a convenient table without a heavy central mass. But specific dimensions are not assigned without a DWG. The end seats are checked separately.

STL-008 in the large dining room

A large base supports an expressive oval surface if the room allows. The central node must remain visible, and the long overhang must be confirmed by calculation.

Base orientation

Parameters A and D must be correlated with the long and short axes of the tabletop. The base cannot be rotated arbitrarily just for appearance if the mounting diagram does not allow it.

Shaped and rectangular tabletop

Shaped contour

It supports the carved character but adds another active pattern. For STL-008, the shape must be especially disciplined, otherwise the central node and edge compete. STL-007 more easily accepts an expressive contour.

Rectangular surface

Suitable for office, writing, and dining scenarios after checking the fastening. Corners and long overhangs affect stability. Chairs are positioned relative to the actual base, not just the edge.

Rounded rectangle

Softens the strict shape and can connect classic carving with a modern interior. The radius and thickness are not assigned by the article: they are chosen according to the tabletop design.

Why you cannot choose a shape based on a single photo

The angle hides the overhang, support points, and legroom. A top view, side view, and full-size mockup are needed. A beautiful combination in a visualization may turn out to be inconvenient in use.

How to check legroom

The underframe is located exactly in the area where a person places their feet. The carved node, connecting parts, and fasteners should not interfere with seating. STL-008 takes up more central space, but the actual ergonomics depend on the tabletop shape and chair position.

Side seating

Place a chair in the intended spot and sit at the mockup. Check your knees, feet, and the ability to change position. One static pose does not show everyday comfort.

End seating

For an oval or rectangular surface, the end seats may be closer to the central node. They are checked separately. Not all sides can be considered identical.

Armchair with armrests

It requires more space and may not slide under the tabletop. This is important for an office and an executive dining room. The edge height and base are checked together.

Position of crossbars and fittings

A set of connecting elements is included, but the exact geometry after assembly must be seen from the drawing. Fasteners should not protrude into the work area.

Multiple users of different heights

The layout is not checked for one person. Different leg lengths and sitting habits change perception. For a commercial space, a control assembled sample is useful.

How to calculate the final table height

You cannot add a randomly selected under-table parameter and tabletop thickness without determining the orientation of A, B, and D and the actual installation mark. The final height is determined from the finished floor to the top surface after assembly.

Check the DWG

Clarify which parameter corresponds to the vertical in the assembled position. In the dimension line, one indicator is close for both models, but this is not a basis for automatic calculation without a drawing.

Add the thickness of the tabletop

Not only the visible edge is taken into account, but also the actual structure, mounting plate, pads, and fixing method. A false edge can create an external volume that does not match the actual thickness.

Consider the floor covering

Carpet or podium changes the actual elevation. A small difference affects the fit, especially with the chair and armrests.

Make a test mockup

Install a temporary surface at the calculated height and sit at it. Only then approve the tabletop and assembly diagram.

Beech for enamel or oak for tinting

Both models are made from beech and oak, so the material is not tied to the size. The buyer can choose a compact oak STL-007, a large beech STL-008, or any other confirmed combination. The main question is whether the wood texture should remain visible after finishing.

Beech under covering enamel

Beech is suitable for a table that needs to be combined with painted facades, panels, doors, or chairs. White, colored, or dark enamel makes the carving part of the overall palette. The surface is prepared with thin layers to avoid smoothing out small transitions and recesses.

Oak for tinting

Oak is chosen for its porous texture and natural character. On STL-007, the texture supports the carving without making the base overly heavy. On STL-008, it enhances the architectural presence. A test coating is done on a relief part because the tone in the recesses looks darker.

Oak under dense enamel

This option may be approved by the project, but the covering layer hides the main visual advantage of the species. If natural texture is not needed, beech often matches the task more precisely. The choice is made before production and finishing.

Beech for transparent finish

Preparation specified for enamel does not automatically mean readiness for tinting. If the buyer wants to leave the wood visible, the surface condition must be clarified and a sample obtained. Beech does not become a visual analogue of oak just because of a similar shade.

Coordination with the countertop

An oak underframe does not have to have a countertop made of the same oak, but the shade, gloss, and visual temperature must be related. Under enamel, the base can be made contrasting, however, a large STL-008 will become especially noticeable. Contrast is checked on a visualization and a physical sample.

One batch for a complete table

If wooden chairs, a cornice, or other parts are used nearby, it is advisable to coordinate them by species and finish. Natural oak can vary in pattern, so elements are distributed before tinting, not after installation.

It is useful to study the material in advance beech or oak for the underframe.

'Standard' or 'Prestige'

When to choose "Standard"

This option is suitable for a workshop that is ready to perform additional finishing under its own finishing system. Before assembly, check the threads, connection points, ends, and the entire batch. The exact differences between preparation levels must be verified with the current STAVROS conditions.

When to choose "Prestige"

More detailed preparation is especially useful for close inspection, transparent tinting, patination, and complex finishes. STL-008 has a larger visual volume, so the surface is more noticeable. But "Prestige" does not cancel the control of assembly points and countertop attachment.

Uniform sanding of the entire set

If the base, tabletop, and additional decor are finished together, different preparation can affect absorption and gloss. For a single table, it is better to determine the overall process route in advance.

Sanding before or after assembly

Most of the relief is easier to control when disassembled. After assembly, check joints and areas that will no longer be easily accessible. The order depends on the chosen finish and instructions.

Delivery in disassembled form

Disassembled delivery is the standard format for STL-007 and STL-008. It facilitates transportation, entry, and access to individual parts during finishing. However, the buyer must understand in advance who will assemble the base, where it will happen, and how geometry will be controlled.

Advantage for entry

Individual elements are easier to bring through doors, stairs, and narrow hallways. This is especially useful for large STL-008. However, the actual dimensions of the rigid packaging must be clarified before delivery.

Convenience of finishing

When disassembled, it is easier to treat hidden areas, recesses, and in

Dry assembly

Before gluing, it is useful to assemble the unit without final fixation, if the instructions allow. Check the fit, symmetry, thread position, and compliance with the drawing. This helps to detect an error before irreversible connection.

Assembled and glued underframe

STL-007 and STL-008 can be ordered in assembled and glued version only after separate approval. This format reduces the amount of work on site but increases transport dimensions and complicates the delivery route.

When assembly at the factory is more convenient

It is useful if there is no qualified workshop, tools, or space for geometry control on site. The buyer receives a ready base, but the tabletop and its fastening still need to be agreed upon separately.

When the disassembled format is more practical

If the door, elevator, or staircase is limited, it is easier to bring parts separately. A disassembled kit is also more convenient for painting different areas. But final assembly must be performed by a specialist.

Compare the dimensions with the route

Before ordering an assembled STL-008, measure all openings, turns, and space for maneuvering. Rigid packaging increases the size. Removing protection before bringing it indoors is risky.

Gluing and future disassembly

A glued joint is not designed for the same easy disassembly as a fitting kit. This is important for moving and reassembly. The decision is made considering the service life and the room.

What is included in the connecting fittings kit

It is confirmed that assembly fittings are included. The exact composition, number of parts, tools, and consumables must be checked in the specific order's configuration. It cannot be guaranteed that glue, tabletop fasteners, and all materials for final assembly are automatically included.

Separate the connecting fittings from the tabletop fasteners

The parts that assemble the base and the fasteners that connect it to the tabletop may be different kits. The card confirms the fittings for assembling the underframe, but the fastening scheme for a specific surface must be agreed upon.

Check the instructions

The names and quantity of elements are verified before starting work. You cannot rely only on photos of the finished product. If the instructions are unavailable, request them before finishing the connection areas.

Do not replace fasteners arbitrarily

A different diameter, length, or type of connection can damage the wood or change the geometry. Replacement is only allowed after technical confirmation.

Glue

It should not be considered part of the kit without verification. The composition type depends on the joint, wood moisture, finish, and technology. Excess glue must not contaminate areas intended for staining.

How to check the tabletop fastening

Surface fastening is a separate unit. It must account for the material, thickness, weight, temperature and humidity changes of the wood, and the position of the center of gravity. For STL-007 and STL-008, a single universal kit cannot be assigned.

Get the installation drawing

The DWG shows support zones and points where fastening is allowed. Drilling "in the center" without a diagram may hit a thin area or damage the thread.

Consider the movement of the wooden tabletop

If the surface is made of solid wood, its size may change with humidity variations. The fastening method must account for this process. The specific solution is determined by the furniture designer.

Stone and heavy materials

Their weight and fragility require a separate system. The cards do not confirm automatic compatibility. You cannot rely solely on the visual massiveness of STL-008.

Check the center of gravity

A shaped or asymmetrical tabletop can shift the load. The base and surface must form a stable system. This is confirmed by calculation and trial assembly.

Do not hide fasteners until inspection

First, perform a trial assembly and check the table on a level base. Only after confirmation, close decorative elements and complete the finishing.

How to check the stability of the finished table

Stability depends on geometry, assembly, floor, tabletop, and load distribution. It is not determined by a single underframe size. STL-008 is larger, but this does not automatically allow using a heavier or wider surface.

Level floor

On an uneven base, even a properly assembled table may wobble. The installation location is checked with a level. The method of compensating for unevenness must match the design and not spoil the carved silhouette.

Diagonal control

After assembly, measure the geometry according to the drawing and check for the absence of skew. Uneven tightening of hardware can change the position of parts.

Edge load

A person may lean on the edge of the tabletop. This scenario is considered in the calculation, especially for long and shaped surfaces. Safety must not be checked by random strong pressing without professional assessment.

Re-check after installation

After installing the countertop and moving the table, the connections are inspected again. Transportation and carrying may affect the tightening. The schedule for further inspection depends on the design.

Delivery and carrying route

Both models are supplied in rigid packaging. The disassembled format makes the path easier, but the box can still be large. The assembled version requires particularly careful checking of doors, elevator, stairs, and turning space.

Disassembled STL-007

The compact model is usually easier for confined spaces, but the packaging size is specified separately. Do not assume that the set will fit in any passenger car or narrow elevator.

Disassembled STL-008

Individual parts are easier to carry than the assembled base. The rigid box protects the threads but adds to the dimensions. Check corridor turns and stair landings.

Assembled version

Its route is modeled based on the actual external contour and packaging. There must be space in the room for turning and installation. Sometimes it is more sensible to assemble the underframe directly next to the future table.

Storage before assembly

The boxes are placed on a dry, level base and protected from impacts. Wooden parts should not be placed near a source of moisture or intense heat. Exact conditions are clarified according to the manufacturer's recommendations.

STL-007 and STL-008 in different interiors

Intimate dining room

STL-007 often looks more accurate because it preserves free space between the table, chairs, and walls. The base remains carved and expressive but does not turn a small room into a dense furniture composition. STL-008 should only be checked with a full-size mockup.

Spacious dining room

Here, STL-008 reveals an increased volume and better holds attention under a noticeable tabletop. If the room has a high ceiling, a long wall, and large doors, STL-007 may seem too restrained. However, the surface size and number of seats are still not assigned without calculation.

Living room

A table in the living room often coexists with upholstered furniture, a TV area, a fireplace, or a library. STL-007 helps not to overload the space if there are already many decorative elements. STL-008 is appropriate when the table becomes the central object and there is a clear view around it.

Small study

The compact STL-007 is easier to coordinate with an armchair, cabinet, and passage. The tabletop must suit the work scenario, and the central carving should not interfere with legs. Cables and equipment are added to the project before the mount is approved.

Executive office

STL-008 supports the scale of a large library, panels, and doors. The base can be tinted to match oak furniture or painted together with beech elements. It is important that work ergonomics are not sacrificed for decorativeness.

Grand hall

A large underframe is visible from a distance and diagonally. STL-008 is suitable for an interior or exhibition table if its function and mount are calculated. STL-007 can be used for a lighter console composition, but the scenario cannot be transferred without checking the tabletop.

Bedroom

For a writing, dressing, or interior table, STL-007 is considered first. A large STL-008 next to a bed, wardrobe, and textiles can look heavy. The purpose of the finished table is determined by the project, not just the name of the base.

Commercial space

In a hotel, salon, showroom, or restaurant, both models can become part of representative furniture. The STL-008 is more noticeable in a large hall, while the STL-007 suits an intimate area. Before the series, a control sample is assembled to check stability, cleaning, passages, and finish wear.

What to buy together with STL-007 or STL-008

The base does not become a finished table without a tabletop, fasteners, finish, and assembly. A commercially correct order starts not with a single item card, but with a set. At the same time, links can only be placed on confirmed pages, so unconfirmed tabletops and fasteners are listed without fabricated URLs.

How not to confuse a carved underframe with similar solutions

Underframe and separate furniture legs

The underframe represents a coordinated base with central connecting elements and a set of fittings. Separate legs require independent calculation of aprons, fasteners, and stability. The choice reveals the material underframe or separate furniture legs.

Compact base and small ready-made table

STL-007 is smaller than STL-008, but the size of the finished surface is not confirmed. The model cannot be sold as a base for a specific small table without a drawing and calculation.

Large base and guaranteed load

STL-008 has a larger volume, but this is not proof of strength for a heavy tabletop. The load depends on the entire structure.

Disassembled delivery and incomplete set

A disassembled underframe is the standard format, and connecting hardware is included. However, the exact composition is checked, and the tabletop attachment is not automatically included in this set.

Assembled version and ready-made table

Even an assembled and glued underframe remains a base without a confirmed tabletop. Separate assembly coordination does not mean delivery of fully finished furniture.

Interior underframe and outdoor base

Outdoor use is not confirmed. Moisture, temperature changes, and coating require different documentation. STL-007 or STL-008 cannot be recommended for outdoor use just because they are made of solid wood.

Practical choice for specific situations

Need a table for a small room

First, check STL-007. Make a mock-up of the base and tabletop, place chairs, and evaluate the passages. If the compact model gets lost, move to STL-008 only after re-checking the space.

The table should become the centerpiece of a large dining room

STL-008 fits better in terms of visual scale. The base should be visible from several sides, and the surface should support it without creating an unjustified excessive overhang.

Need an executive desk

For a standard office, STL-007 is more often chosen; for a prestigious one, both models are compared. The chair, knee space, cabinets, and cables are checked on the mockup.

There is an expressive stone tabletop

You cannot automatically choose STL-008 for the sake of visual mass. Stone requires calculation of weight, support, and fastening. STL-007 or STL-008 is determined by the designer and proportions.

Need a white painted base

Choose beech and coordinate the enamel. STL-007 will give a lighter silhouette, STL-008 a large architectural accent. Light color does not reduce the physical volume.

Natural oak is needed

Both models are available in oak. First, choose the scale, then perform a test tinting. The underframe and tabletop do not have to be the same, but must match in visual temperature.

The table needs to be assembled on site

Order the disassembled format, having previously checked the instructions, the set of fittings, the tool, and the assembler's qualifications. The finish should not interfere with the connections.

High-quality gluing is impossible at the site.

Agree on the assembled and glued version. After that, re-check the packaging, doors, elevator, and the turning space.

Mistakes when purchasing STL-007

Choose a compact model for an excessively large countertop.

STL-007 may visually get lost, and a long overhang will require unconfirmed calculations. The surface is chosen after the DWG, not by the desire to get more seats at any cost.

Consider STL-007 as a base only for a small room.

The model can also be used in a spacious interior if a lighter table is needed. The room is not the only criterion; the countertop, decor, and the role of the furniture are important.

Not checking the legroom.

A compact size does not guarantee a comfortable seating. The carved center and connections need to be applied to a full-size mockup.

Choosing STL-007 only for a lower price

The actual cost is checked in the product card, and the choice should be based on scale and compatibility. A more compact option is not automatically a cost-effective replacement for a larger model.

Ordering oak under a covering enamel without a conscious reason

A dense color will hide the texture. For a painted base, it's worth comparing beech if the project doesn't require oak for other reasons.

Mistakes when buying STL-008

Considering large size as proof of higher load capacity

The card does not confirm a universal permissible load. The weight and size of the tabletop are determined by the calculation of the entire system.

Not making a mock-up in a small room

Parameter D is 78 mm larger, and this is noticeable under the table. STL-008 can reduce visual space and legroom.

Buying a model for grandeur without a clear view

If the table is wedged between a wall and a sofa, large carvings are barely visible. In that case, STL-007 may be more precise and rational in scale.

Order the assembled version without checking for fit through doorways

A glued base cannot be separated into parts on the stairs. The route is checked together with rigid packaging.

Overload the tabletop with active carving

A shaped edge, complex surface pattern, and large STL-008 may compete. One element should be dominant, the others should support it.

Common mistakes when buying a carved underframe

Confusing parameters A, B, and D

The orientation of each dimension is checked against the DWG. Do not call the first number height or width out of habit.

Not specifying the hardware kit

The presence of connecting parts is confirmed, but do not assume that glue and tabletop fastening are included automatically.

Start finishing before dry assembly

Coating may get on connection areas and complicate fitting. First check the kit and geometry.

Assign a countertop without a center of gravity

A shaped, heavy, or asymmetrical surface requires calculation. A beautiful overhang does not guarantee stability.

Not agreeing on the final height

The base, mounting unit, countertop, and floor covering form the overall size. The finished height is checked with a mockup.

Using an interior base outdoors

Outdoor use is not confirmed. Moisture and temperature conditions require a separate product and coating.

Who is STL-007 suitable for

• chamber dining room, bedroom, study, and small living room;
• an interior with already rich carved decor;
• a table where the tabletop and base should be equal;
• a customer who needs a size of 685 × 757 × 174 mm;
• a beech base for enamel;
• an oak underframe for tinting;
• independent professional assembly on site;
• a project where more visual space under the tabletop is required;
• a room with a limited delivery route.

When it's better not to choose STL-007

• the base should become the main architectural object of the large hall;
• the full-size layout shows that the model is lost;
• the project requires a different mounting zone size;
• the proposed tabletop is not confirmed by calculation;
• the ornament or proportions do not match the furniture;
• the buyer expects a finished table, not a separate underframe.

Who is STL-008 suitable for

• a spacious dining room, formal living room, and large study;
• a hall and commercial interior with a view from all sides;
• a table where the carved base should dominate;
• a buyer who needs a size of 804 × 750 × 252 mm;
• large classical composition;
• beech under covering enamel or oak under tinting;
• project with pre-calculated tabletop and stability;
• order of assembled execution after checking the carry-in.

When it's better not to choose STL-008

• the room leaves no space around the table;
• the central node interferes with seating according to the layout;
• the base competes with the active tabletop and furniture;
• large size is chosen only for the expected load;
• the assembled set does not fit through openings;
• STL-007 maintains the desired style without unnecessary bulk.

What to Check Before Ordering

• article STL-007 or STL-008;
• all parameters A, B and D according to DWG;
• orientation of the base in assembled form;
• full-size outline on the floor;
• shape, size, material and weight of the tabletop;
• mounting area and attachment points;
• center of gravity of the finished table;
• legroom from all seating sides;
• final height considering the surface and floor;
• stability on a real base;
• beech or oak;
• enamel or tinting;
• 'Standard' or 'Prestige' sanding;
• disassembled or assembled delivery;
• whether gluing is needed in production;
• exact composition of connecting fittings;
• glue and countertop attachment;
• size of rigid packaging;
• doors, elevator, stairs, and assembly location;
• current price, production time, and availability.

How to buy STL-007 or STL-008 at STAVROS

First, compare the two contours using DWG and make a base layout together with the countertop. For the chamber interior, open the card and order the oak table base STL-007 or choose beech under enamel. For a spacious dining room and architectural accent, open the card and order the oak STL-008.

If no size fits, you can compare the sizes of bases for the tabletop in the category. For a comprehensive project, it is useful to assemble a table from ready-made elements and in advance select materials for finishing the table base.

Before payment, confirm the delivery format, set of fittings, assembly, gluing, packaging, and current deadline. The product card remains the point of purchase, and the calculation of the tabletop and stability is a mandatory part of the finished table project.

FAQ: questions about STL-007 and STL-008

How is STL-007 different from STL-008?

STL-007 is more compact: 685 × 757 × 174 mm. STL-008 measures 804 × 750 × 252 mm and has a stronger impact on the architectural look of the table.

How much larger is STL-008?

Parameter A is 119 mm larger, parameter D is 78 mm larger. Parameter B, on the other hand, is 7 mm smaller.

Which underframe to choose for a small room?

First, STL-007 is checked, but the decision is made after a mock-up with the tabletop, chairs, and walkways.

What suits a spacious dining room?

STL-008 usually better holds the scale of a large space and becomes a noticeable central accent.

Can the same tabletop be placed on both models?

This is not confirmed. Size, shape, mounting, and surface mass are checked separately per DWG and calculation.

Which tabletop is suitable for STL-007?

Round, oval, shaped, or rectangular form is only possible after checking the installation area, overhang, center of gravity, and legroom.

Which tabletop is suitable for STL-008?

The large model visually accepts a more architectural surface, but specific dimensions and material cannot be assigned without a project.

How to calculate the height of the finished table?

The vertical base dimension must be determined per DWG, and the actual tabletop structure, mounting, and floor covering must be added.

How to check legroom?

Assemble a full-size mockup, place chairs, and check the side and end seating positions.

What wood are the models made from?

Both are available in beech or oak.

What to choose for enamel?

Beech, if a covering paint is needed. The specific primer and enamel system is agreed upon separately.

What to choose for tinting?

Oak, when it is important to preserve the natural wood texture.

What sanding is available?

For STL-007 and STL-008, "Standard" and "Prestige" are available.

Are the underframes delivered assembled?

By default, it comes disassembled. Assembled and glued version is agreed upon separately.

Does the hardware come included?

Connecting hardware for assembly is included. The exact composition and fastening of the tabletop need to be checked.

Is the tabletop included?

It is not listed as part of the kit in the provided data. The completeness is confirmed in the product card before ordering.

What load does STL-007 support?

The universal permissible load is not confirmed. It depends on the assembly, tabletop, fastening, and the final structure.

Is STL-008 stronger due to its larger size?

That cannot be stated. Dimensions alone do not prove load-bearing capacity.

How is the underframe delivered?

Both models are supplied in rigid packaging. The actual box size and delivery route are checked in advance.

Can I order assembly at the factory?

Yes, the assembled and glued version can be separately agreed upon when ordering.

Where to buy STL-007?

In the card, you can Buy compact carved under-table STL-007.

Where to buy STL-008?

In the card, you can Buy large carved under-table STL-008.

Where can I see other bases?

You can buy a solid wood table base in the general category.

Result: a compact base or an architectural centerpiece of the table

STL-007 and STL-008 have the same choice of materials, sanding, and delivery format, so the main difference is related to scale. STL-007, measuring 685 × 757 × 174 mm, supports the composition and leaves more visual space. STL-008, measuring 804 × 750 × 252 mm, fills the space under the tabletop more strongly and suits an interior where the carved base should become an independent accent.

Before purchasing, you need to check not only the room but also the future table as a whole: the shape and weight of the tabletop, the mounting area, legroom, height, stability, hardware, assembly, and delivery route. A larger dimension does not replace calculation, and a compact size does not guarantee compatibility with any surface.

After a full-size mockup, the choice becomes clear: STL-007 is for a lighter classic composition, STL-008 is for a spacious formal scenario. STAVROS allows you to order both models in beech or oak, choose "Standard" or "Prestige," and pre-arrange the assembled version.