The kitchen hood duct against the slatted wall looks empty: two carved brackets KRPU-021 on the sides — should we take 124, 149, or 199 mm?

A ready-made range hood box can be technically neat, but look too plain against a slat wall. Especially if there is already a pronounced vertical rhythm on both sides, and the central box remains a smooth rectangular volume without its own decorative finish.

One option is to place two identical carved polyurethane brackets KRPU-021 on its sides.

Here the key word is exactly two. One bracket cannot be evaluated separately if in the finished interior they must work as a symmetrical pair.

The KRPU-021 has three sizes:

KRPU-021 variant	Size	Price per 1 pc.	Price per pair
Small	124 × 50 × 27 × 8 mm	1 370 ₽	2 740 ₽
Medium	149 × 60 × 33 × 10 mm	2 190 ₽	4 380 ₽
Large	199 × 80 × 44 × 13 mm	4 820 ₽	9 640 ₽

All three variants are made of polyurethane. The product is made to order, average production time is 3–7 days.

The main mistake here is choosing only by the first digit: 124, 149, or 199 mm.

When the size increases, the following change simultaneously:

• height of the decorative element;

• its width;

• relief depth;

• the visual mass of two parts at once;

• the distance they will occupy next to the slat panels;

• the cost of the pair.

Therefore, the question before buying should not sound like this:

"Which KRPU-021 is more beautiful?"

But like this:

"Which pair of KRPU-021 fits the actual size of my box and does not conflict with the slats, cabinets, and hood maintenance?"

KRPU-021 in this article is considered only as a decorative carved bracket. It should not be perceived as a load-bearing support for the hood box or as a part that bears the weight of the structure.

After fitting, you can buy a carved bracket KRPU-021 immediately in the quantity of two identical elements of the selected size.

Go to Catalog

Why an empty hood box is especially noticeable on a slat wall

Slat panels already create a very pronounced geometry.

Each slat provides:

• a vertical line;

• its own side face;

• shadow;

• a repeating rhythm.

When a simple smooth hood box is located between two such zones, a sharp contrast arises:

many small vertical lines → one large smooth volume → again many vertical lines.

Sometimes this kind of contrast is exactly what is needed. Then it is better not to complicate the box at all.

But in a classic, neoclassical, or mixed interior, a smooth box may look too furniture-like or unfinished relative to the rest of the decor.

Two KRPU-021 change primarily not the hood itself, but the lower geometry of the box.

If you place one carved bracket on each side, a more architectural transition appears from the main mass of the box to the wall or lower boundary.

At the same time, it's important not to overdo it.

The more active the slatted wall, the more careful you need to be when adding another relief.

Therefore, the three sizes of KRPU-021 cannot be perceived as "small, normal, and improved large." These are three different scales of one decorative idea.

KRPU-021 is a decorative bracket, not a mounting fixture for an exhaust hood.

This needs to be determined before any discussions about installation.

KRPU-021 is used in the article as a carved decorative bracket made of polyurethane.

It should complement the existing box.

Correct sequence:

The box is already structurally assembled and secured → the hood is installed according to its requirements → access to the equipment is verified → after that, the decorative pair KRPU-021 is designed.

Incorrect logic:

"Let's install two brackets and the box will be supported by them."

We do not assign such a function to the bracket in this article.

This is especially important in the kitchen, because the box may include:

• its own frame;

• extractor hood equipment;

• air duct;

• removable elements;

• electrical connections;

• technological zones.

The decorative element should not interfere with the structural scheme of the equipment.

If a specific extractor hood requires certain free zones, accesses, or distances, the instructions and requirements of the equipment manufacturer take priority.

Our factory also produces:

View Full Product Catalog

Three sizes of KRPU-021: how they differ on a real box

Three different scales are offered for one article number.

KRPU-021 124 mm

Size:

124 × 50 × 27 × 8 mm.

A pair costs:

2 740 ₽.

This is the most compact option.

It covers less of the side surface and protrudes less from it.

KRPU-021 149 mm

Size:

149 × 60 × 33 × 10 mm.

Pair:

4 380 ₽.

Compared to the 124-millimeter version, not only the height increases.

The width changes:

50 → 60 mm.

Depth:

27 → 33 mm.

Therefore, the visual difference is greater than just 25 mm in height.

KRPU-021 199 mm

Size:

199 × 80 × 44 × 13 mm.

Pair:

9 640 ₽.

This is already a noticeably larger part.

If compared to the smallest one:

• the first value increases from 124 to 199 mm;

• width — from 50 to 80 mm;

• depth — from 27 to 44 mm;

• price per pair — from 2,740 to 9,640 ₽.

That's why you can't order the large option just because the box is big.

You need to check the entire three-dimensional composition.

What box dimensions to take before choosing

There is no universal rule:

"for a 900 mm box, you need KRPU-021 149 mm".

Such a correspondence would be artificial.

Two boxes of the same width can look completely different:

• height;

• side margins;

• distance to the rail;

• depth;

• adjacent furniture;

• bottom finish.

Therefore, at least four actual measurements are needed before ordering.

1. Overall box width

It shows the scale of the central volume.

2. Height of the zone where the bracket can actually be placed

Not the entire height of the box is necessarily available for decor.

The following may interfere:

• bottom panel;

• door;

• seam;

• cornice;

• removable part.

3. Distance from the box to the first rail

This is especially important for the large KRPU-021, which is 80 mm wide.

4. Actual protrusion of the box

The bracket has its own depth: 27, 33, or 44 mm depending on the variant.

If the box already protrudes significantly, the large relief should be viewed from the side.

These four dimensions are best written down before opening the product page. Then the choice doesn't turn into guessing from a photo.

Why you should choose in pairs right away

One KRPU-021 may look compact.

Two identical elements on the sides of the box are perceived completely differently.

Pair:

• enhances symmetry;

• makes the lower part of the box visually wider;

• creates two identical shadow spots;

• interacts more strongly with the outer rails.

Therefore, a paper template of one bracket does not solve the problem.

For each size, two identical templates are needed.

In total, it is better to prepare:

• 2 templates 124 × 50 mm;

• 2 templates 149 × 60 mm;

• 2 templates 199 × 80 mm.

And apply them exactly in pairs.

This way you will get three real compositions:

Option A — two small;

Option B — two medium;

Option C — two large ones.

Only after this does it make sense to compare.

How to make three pairs of templates without buying

For an initial check, an exact copy of the ornament is not required.

Need to understand the scale.

Cut out from thick paper or cardboard:

Option	Front template size
Small	124 × 50 mm
Medium	149 × 60 mm
Large	199 × 80 mm

If the actual orientation of the product on the card differs from the assumed placement of the rectangle, the template should be rotated the same way the real KRPU-021 will be installed.

It is better to additionally print a photo of the bracket approximately at actual scale.

Install two templates symmetrically.

After that, take three photos from the same point.

Do not change:

• camera position;

• shooting height;

• scale;

• lighting.

Then you can honestly compare sizes.

Small KRPU-021 124 mm: when it can be better

The 124-millimeter version should not be perceived as an "economical version of a normal bracket."

On some boxes, it will be the right one.

Its advantages in the situation under consideration are related to scale:

• takes up less lateral space;

• has a width of 50 mm;

• depth 27 mm;

• competes less with the relief of the slats;

• cheaper as a pair.

The pair costs 2,740 ₽.

The small KRPU-021 makes sense to check first if:

• the box is relatively compact;

• the distance to the first slat is small;

• the decorative accent should be delicate;

• there are already many other details nearby;

• the lower part of the hood should not become the dominant element.

But there is also the opposite risk.

On a wide, tall box, two small brackets can visually get lost.

That is why the decision is made based on two templates simultaneously.

The average KRPU-021 149 mm: why it is not an automatic compromise

The average option often psychologically seems the safest:

neither small nor large.

But this is a weak criterion.

Size:

149 × 60 × 33 × 10 mm.

A pair costs:

4 380 ₽.

It has more height, width, and depth compared to the 124-millimeter version.

Therefore, 149 mm should be chosen not because it is the "middle of the lineup," but if on the mockup this particular pair better connects the scale of the box and the slat wall.

For example, the small option may look like too much of a furniture trifle, while the 199-millimeter one already starts to press excessively on the lower part.

Then 149 mm truly becomes a rational solution.

But the conclusion should come after trying it on, not before.

KRPU-021 199 mm: where a large pair starts to change the entire box

Size:

199 × 80 × 44 × 13 mm.

A pair costs:

9 640 ₽.

This model can no longer be assessed as a small addition.

Two large brackets can noticeably change the proportions of the entire volume.

Especially need to check:

• how far they approach the outer rails;

• whether they become wider than the left smooth side margin;

• how they look from below;

• how much they protrude from the side;

• Do they not conflict with neighboring upper cabinets.

The depth of 44 mm is almost 1.63 times greater than the 27 mm of the small variant.

This does not mean that the large KRPU-021 is "too deep." But the side view will indeed be different.

On a tall and massive exhaust composition, this option may prove to be the most convincing.

On a small box, it can visually make the lower part excessively heavy.

Comparison of three variants in one table

Criterion	124 мм	149 мм	199 мм
First value	124 мм	149 мм	199 мм
Width	50 мм	60 мм	80 мм
Depth	27 мм	33 мм	44 мм
Fourth value	8 мм	10 мм	13 мм
Price per piece	1 370 ₽	2 190 ₽	4 820 ₽
Price per pair	2 740 ₽	4 380 ₽	9 640 ₽
Visual role	Delicate	Medium	Pronounced
What to check especially	Will it be lost	Overall balance	Will it overload the box?

After the table, it's clear why you can't compare options only by 124/149/199.

The size grows in several directions at once.

How to check the free space from the box to the rail

Suppose there is a smooth field left from the side edge of the box to the first rail panel.

It needs to be measured separately on the left and on the right.

It is not assumed that both sides are absolutely identical just because the project was designed symmetrically.

Let's denote the actual free field:

S.

If the selected bracket in the required orientation occupies a width K horizontally, after placement there remains:

R = S − K.

For example, if the free field is 110 mm and in the actual orientation the bracket occupies 80 mm toward the rails:

110 − 80 = 30 mm.

This does not automatically mean that 30 mm is "sufficient" or "insufficient."

But now you know the actual geometry and can make a template.

If the field is only 70 mm, and the part in this orientation takes up 80 mm, it already extends beyond the calculated zone.

Such a problem needs to be detected before purchase.

Why the outermost rail is an important visual boundary

On a regular smooth wall, a large bracket may look relatively unobtrusive.

Next to a slat panel, the situation is different.

The first slat is already a strong vertical line.

If the decorative bracket almost touches it with its ornament, a complex junction of two reliefs appears:

carved pattern → small gap → vertical slat.

Such a connection can look rich.

Therefore, when comparing three sizes, you need to look not only at the box itself.

You need to cover everything else with your hand and look at the transition separately:

box → KRPU-021 → smooth field → outer slat.

If the medium or large option almost completely eats up the smooth area, perhaps the small one will look cleaner.

How to check the side view: 27, 33, and 44 mm matter

The frontal template shows only two axes.

But the real KRPU-021 options also differ in depth:

• 27 mm;

• 33 mm;

• 44 mm.

The difference between small and large:

17 mm.

In absolute terms, this seems like a small value.

In side light and near a protruding box, the difference can be noticeable.

To check it before purchasing, you can make a simple three-dimensional mock-up.

Glue a layer of cardboard or foam board of approximate thickness onto the paper template:

• 27 mm;

• 33 mm;

• 44 mm.

Then look:

• from below;

• from the side;

• from the kitchen entrance;

• from the table area;

• with the backlight on.

Large relief can look significantly more expressive than in a frontal photograph.

The fourth dimension is 8, 10, and 13 mm: we do not interpret it without a diagram

The dimensions of KRPU-021 include four values:

• 124 × 50 × 27 × 8 mm;

• 149 × 60 × 33 × 10 mm;

• 199 × 80 × 44 × 13 mm.

The first three already allow comparing the overall scale and depth.

But you cannot independently assign a function to the fourth dimension that the card or drawing does not confirm.

Do not write:

"8 mm is the thickness of the mounting plate"

or

"13 mm is the width of a specific part of the ornament"

without a technical diagram.

For the buyer, it's enough to know here:

the fourth parameter also increases with the scale of the product and should be checked against the card of the specific size.

This is safer than building mounting conclusions on guesswork.

Position of the pair by height: don't look for a universal mark

There is no rule:

"the bracket should start exactly 200 mm above the lower edge of the hood."

On one box it may look good, on another — ridiculous.

The height depends on:

• the shape of the box;

• its lower end;

• the height of adjacent cabinets;

• the cornice line;

• the position of slat panels.

Therefore, first determine the decorative side zone where installation is generally allowed.

Then place a pair of templates in three positions:

1. below;

2. in the intended main position;

3. above.

Compare the photos.

The bracket should look like part of the box itself, not a random appliqué on the side wall.

Should brackets be placed directly under the lower corners of the box?

Not necessarily.

If the box shape implies an architectural finish precisely at the lower corners, such placement is logical.

But there are designs where:

• the lower part already has a protrusion;

• there is a decorative shelf;

• a removable panel is located;

• a technical seam runs through.

Then KRPU-021 is better either raised or abandoned altogether.

Before installation, it is important to understand which part of the box is a stationary decorative surface and which belongs to serviced equipment.

Equipment verification is more important than decorative symmetry

This is a kitchen, so the aesthetic layout is only half the check.

Before gluing the KRPU-021 pair, make sure they do not interfere with the operation and maintenance of the equipment.

Check:

• access to filters;

• possibility of removing service parts;

• access to fasteners, if they are to remain serviceable;

• ventilation openings;

• technological gaps;

• opening of adjacent cabinets;

• hinges;

• doors.

If the instructions for a specific hood require leaving a free zone, the decorative element must not occupy it.

You cannot sacrifice serviceability for the sake of perfect symmetry of the two brackets.

What happens if an upper cabinet opens nearby

This is a separate practical test.

The bracket may be on the cabinet body and visually not touch the cabinet, but the door swings along an arc when opened.

Therefore, measuring in the closed state is not sufficient.

Open the door fully and check the trajectory of its nearest edge.

If lift-up fronts are used, also check the upward movement.

After installing KRPU-021, normal opening should remain without contact with the decorative element.

This check should be done especially carefully with the large version with a depth of 44 mm.

The box protrudes forward: what to check

If the box protrudes significantly relative to the main wall, the bracket may be perceived as a side console.

With a slight protrusion, it is perceived more as an overlay decor.

Therefore, the same size KRPU-021 on two boxes of the same width can look completely different.

Take another measurement:

how many millimeters the front plane of the box protrudes from the base wall.

Then apply the volumetric template.

From the side angle, it will be clear:

• whether the bracket supports the depth of the box;

• whether it looks too shallow;

• whether it creates an unnecessary additional protrusion.

What influences the choice more: the width of the box or the side area

Usually, the buyer first measures the total width of the hood.

But for KRPU-021, a more immediate constraint is often the local installation area.

For example, two boxes each 1000 mm wide.

The first one has 150 mm left on each side before the slat panel.

The second one has only 75 mm.

Even with the same total width, the available options will differ.

Therefore, the logic should be as follows:

overall box scale → free side zone → depth → only then the specific KRPU-021.

Not the other way around.

How to understand that 124 mm is too little

There is no absolute box size after which 124 mm is "forbidden."

But the layout provides several visual indicators.

The small variant may be weak if:

• the bracket is barely readable from a normal viewing point;

• the large box makes the pair visually random;

• there remains a huge smooth mass between the two elements without other details;

• the ornament is noticeable only up close.

Then it's worth comparing with 149 mm.

But don't jump straight to 199 mm.

The new variant should solve a specific scale problem.

When 149 mm looks most cohesive

The middle model often proves appropriate if:

• 124 mm is already lost;

• 199 mm comes too close to the rails;

• the 44 mm side protrusion seems excessive;

• the box is not massive enough to require a large ornament.

The 149 mm pair costs 4,380 ₽.

The difference relative to the small pair:

4 380 − 2 740 = 1 640 ₽.

This is a noticeable but not multiple increase in budget.

The transition to the large pair is already much more significant:

9 640 − 4 380 = 5 260 ₽.

Therefore, trying on is especially important before choosing 199 mm.

When 199 mm justifies its price

The large version costs 4,820 ₽ per piece, a pair — 9,640 ₽.

It makes sense if its larger scale is truly needed for the composition.

For example:

• the box is wide and tall;

• the lower part looks too massive without decorative supports;

• there is enough free space between the box and the rails;

• the 44 mm depth does not interfere with adjacent elements;

• the pair reads well from the main viewing point.

If the large option is chosen only because it is "richer," the cost increases without a guarantee of a better result.

The decorative detail has no principle:

more expensive = more proportional.

Why does the price of a pair change more than the visual difference in height

Let's compare:

124 → 149 mm.

Difference of the first value:

25 mm.

Price of a pair:

2 740 → 4 380 ₽.

Now:

149 → 199 mm.

The difference:

50 mm.

Price:

4 380 → 9 640 ₽.

That is, the large version is already a separate commercial solution.

It should be chosen only after the layout.

Especially if purchased together with the brackets:

• mounting compound;

• other stucco elements;

• slat panels;

• decor of adjacent walls.

The two brackets must be truly symmetrical

If the box is central, the KRPU-021 pair works only with precise symmetry.

Do not measure "by eye."

Fix:

• the left point;

• the right;

• top mark;

• the lower mark;

• distance from the front edge;

• distance from the batten zone.

It is better to make one paper diagram and transfer the coordinates mirrored.

A slight difference in the position of two large decorative parts can be more noticeable than a similar error on the battens themselves.

What to do if the box is not positioned exactly in the center of the wall

There is no need to forcibly center KRPU-021 relative to the entire wall.

The brackets primarily relate to the box.

If the box itself is shifted due to the kitchen layout, the pair can remain symmetrical relative to it.

But then you need to check whether there is a conflict with the slat panels:

• on the left, the distance to the rail is one;

• on the right, it is different.

In such a situation, full-size templates are especially useful.

Sometimes the bracket itself remains symmetrical on the box, although the free margins around it differ.

Sometimes the asymmetry looks so pronounced that it's better to abandon the pair.

Painting in the color of the box

The calmest scenario is KRPU-021 and the box in the same color.

Then the bracket is read by:

• relief;

• side shadow;

• surface plastic surgery.

Against the background of slat panels, this often helps maintain the unity of the central zone.

This approach is especially useful for the large 199 mm variant: the color does not add a separate contrast to the already large relief.

If the chosen system of preparation and painting of polyurethane decor is allowed by the material manufacturer's recommendations, it is better to agree on the color on a sample.

Painting in the color of the slat panel

Another option is to connect KRPU-021 not to the box, but to the side trim.

For example:

• the box is light;

• the slats are dark;

• the brackets get the shade of the slats.

Then two KRPU-021 visually connect the central box with the side zones.

But this solution has a risk: the brackets may start to look like separate glued-on objects.

Therefore, the contrasting option must be checked immediately as a pair.

If the bracket is too active, the problem may not be in the size

Sometimes the user compares 124, 149, and 199 mm and none of the options is liked.

This does not necessarily mean that a fourth size of KRPU-021 is needed.

The reason may be in the type of decor itself.

For example:

• the interior is too minimalist for a carved bracket;

• the slats already create sufficient texture;

• the box should remain simple;

• need a different drawing.

In that case, it is wiser to open the section to buy decorative polyurethane brackets and compare another article.

When KRPU-021 is not needed at all

There are several scenarios where skipping decor is the right decision.

The box is already proportional

Adding brackets doesn't improve anything.

The slats are very active

A third decorative system overloads the wall.

The bracket interferes with maintenance

Equipment functionality is more important.

A cabinet opens nearby

There is no safe free zone.

The box is too narrow

Two elements practically meet visually.

Modern kitchen architecture requires clean geometry

Carved ornament may be stylistically alien.

The article should help not only choose between three sizes, but also refuse to buy if the idea itself is not suitable.

Cost of three ready-made pairs

Set	Quantity	Price per pair
KRPU-021 124 mm	2 pcs.	2 740 ₽
KRPU-021 149 mm	2 pcs.	4 380 ₽
KRPU-021 199 mm	2 pcs.	9 640 ₽

If a symmetrical composition is required, you need to buy exactly 2 identical KRPU-021 of the same size.

Do not mix:

124 mm on the left + 149 mm on the right

even if one side zone is slightly narrower.

If the architecture is so asymmetrical that two identical elements do not fit, it is better to reconsider the design scheme itself.

What to add to the cart

After choosing the size, the base purchase:

2 × KRPU-021 of the selected option.

Product card:

buy a carved bracket KRPU-021

If you need to compare other models:

to buy decorative polyurethane brackets

For a wider selection:

You can buy ready-made stucco matching the Baroque style. Calculate the quantity: linear meters of cornices and moldings, number of rosettes, pilasters, consoles, corner elements. Add a ten to fifteen percent allowance for trimming.

If the textured wall itself is also being designed:

Buy slatted panels for wall finishing

For installation, KUDO HIGH TACK is listed among related products:

buy adhesive for mounting stucco decor

The amount of mounting compound is determined by the actual technology, base, and contact area, not just by the number of brackets.

Fitting procedure before ordering

For this topic, one good algorithm is more useful than ten similar examples.

Step 1. Measure the box

Write down:

• width;

• available side height;

• depth;

• distance to the rail on the left;

• distance on the right.

Step 2. Check the equipment

Mark:

• removable panels;

• filters;

• ventilation openings;

• opening parts.

Step 3. Make six templates

Two pieces of each size.

Step 4. Try on 124 mm

Take a photo.

Step 5. Try on 149 mm

From the same point.

Step 6. Try on 199 mm

Without changing the photo scale.

Step 7. Add volume

Check the depth of 27/33/44 mm.

Step 8. Open adjacent cabinets

Ensure the path of the facades is clear.

Step 9. Check access to the hood

Decor should not make maintenance more difficult.

Step 10. Choose the size of the pair

Not of a separate element.

Step 11. Calculate the cost

2 740 / 4 380 / 9 640 ₽.

Step 12. Only now place the order

If KRPU-021 is selected, you need to order 2 pcs. of the same size.

Practical selection table

What the mockup showed	What to do
124 mm is barely readable	Compare with 149 mm
124 mm looks neat	Do not increase size without reason
149 mm provides the right scale	Choose the 149 mm pair
199 mm is too close to the rails	Return to 149 or 124 mm
199 mm supports a large box	Check depth and maintenance
Any size interferes with the cabinet	Abandon this scheme
Any size interferes with the service part	Do not mount in this zone
Two brackets overload the rails	Leave the box without them or choose a different article
The box is asymmetrical	Check the entire composition, not mask the problem with different sizes

Errors when choosing KRPU-021

Error 1. Looking only at the number 124, 149, or 199

Why it occurs: the first value is the easiest to remember.

Consequence: the increase in width and depth is not taken into account.

Check: compare the entire size table.

Solution: make volumetric paired templates.

Error 2. Trying on only one bracket

Why it occurs: it is easier to attach one template.

Consequence: the real pair looks noticeably more massive.

Solution: always try on two.

Error 3. Automatically choosing the largest one for a big box

Reason: want to "balance" a large volume.

Consequence: the bracket may conflict with the rails.

Solution: take into account the local side field.

Error 4. Do not open cabinets during fitting

Reason: everything fits when closed.

Consequence: the facade hits the decor.

Solution: check the full opening trajectory.

Error 5. Close the service part of the hood

Reason: attention is focused on symmetry.

Consequence: maintenance becomes difficult.

Solution: first identify technically free zones.

Error 6. Treating KRPU-021 as a load-bearing support

Reason: the shape resembles a structural bracket.

Consequence: a decorative element is assigned a function that the article does not confirm.

Solution: the box must have its own structural mounting.

Error 7. Not accounting for depth

Reason: the card is viewed frontally.

Consequence: after installation, the element appears too protruding.

Solution: layout 27/33/44 mm.

Error 8. Buying different sizes for left and right

Reason: the side margins are slightly different.

Consequence: the pair loses symmetry.

Solution: either use two identical ones, or change the composition itself.

FAQ

Can KRPU-021 be installed on only one side of the box?

Physically, a separate decorative bracket can be used as an independent element, but the composition in question is built on a symmetrical pair. A single element will drastically change the visual balance. If asymmetry is intended, it should be evaluated as a separate project.

What to do if 199 mm fits on the left, but only 149 mm on the right?

Do not install different sizes automatically. First, find out why the side zones differ. For a symmetrical box, it is better to either choose an identical option that fits on both sides, or abandon the paired scheme.

Can KRPU-021 be used on an already painted box?

The possibility of installation depends on the condition of the base, the composition used, and the surface preparation technology. Any painted surface should not be automatically considered suitable for bonding without checking adhesion and recommendations for the mounting material.

Can brackets be installed after the kitchen is fully assembled?

Yes, the article scenario itself assumes a ready-made box, but before installation you need to check the opening of the facades and access to the equipment.

What to do if the extractor hood ever needs to be removed?

Do not cover the fasteners, service panels, or the dismantling path with a decorative bracket if they must remain accessible. The specific maintenance procedure should be checked against the equipment documentation.

Is it necessary to make a full-size template if the dimensions are already known?

Yes. On the box next to the rails, the scale is perceived differently than in the product card. The change of two parts at once is especially noticeable.

How to understand that the large KRPU-021 is too close to the rails?

There is no universal minimum gap. If visually the ornament and the outermost rail merge into one dense unit, compare the smaller size and increase the free space.

Can the pair be installed higher if a cabinet is in the way below?

This position can be considered if a logical decorative zone remains on the box. But the brackets should not look randomly suspended in the middle of the plane — a full-size mockup is needed.

If the box is very wide, can four KRPU-021 be installed?

That would be a different composition. Four identical carved brackets can create a completely different rhythm and require a separate fitting. The original scenario is calculated for a pair.

Do I need to consider lighting under the hood?

Yes, if decorative elements fall into strong side or bottom light. The deeper the relief, the more expressive the shadows can become. Therefore, the three sizes should be compared under working evening lighting as well.

Can KRPU-021 be placed on the side walls instead of the box facade?

Only after checking the actual geometry of the product, the mounting surface, and how the carved pattern will be read. One orientation should not be transferred to another without a mockup.

What to do if 124 mm looks too small, but 149 mm already seems heavy?

Then the problem may not be only in the size, but in the pattern of the specific KRPU-021. It makes sense to look at other Polyurethane brackets and capitals.

Do I need to buy a third piece as a spare?

For one symmetrical composition, two are needed. An additional element makes sense only for a specific mounting need; automatically adding a third piece to each pair is not required.

Can I order a pair in different colors?

The color scheme depends on the chosen finishing system. For a paired composition, identical coloring usually helps maintain symmetry, but the final option is best checked on samples.

What to do if the box already has a decorative bottom molding?

Check the combined composition. KRPU-021 can either logically continue the existing design or create too much relief in one small area. Here, size alone does not resolve the issue.

Will KRPU-021 be suitable for an industrial metal range hood without a decorative box?

This is a different scenario. Recommendations for a finished interior box cannot be automatically transferred to equipment housing. The hood's own construction, surface, and manufacturer's requirements must be considered.

Summary: you need to choose not one KRPU-021, but one of three pairs

For a finished kitchen hood box against a slatted wall, consider:

2 identical carved brackets KRPU-021.

Three sizes are available.

Small

124 × 50 × 27 × 8 mm

Price of a pair:

2 740 ₽.

Medium

149 × 60 × 33 × 10 mm

Price of a pair:

4 380 ₽.

Large

199 × 80 × 44 × 13 mm

Price of a pair:

9 640 ₽.

It is impossible to determine the best option based only on the width of the box.

Before ordering, you need to:

measure the box → measure the free side area → check the distance to the first rail → make three pairs of templates → check the depth of 27/33/44 mm → open adjacent cabinets → check the hood maintenance → choose one identical pair → add mounting material → order.

If the small option does not get lost on the box, there is no reason to automatically switch to the medium one.

If 149 mm provides the desired scale, the large one does not become better just because of its higher price and size.

If 199 mm really supports a large volume of the box and does not conflict with the slats and equipment, then its large decorative mass is justified.

After such a fitting, you can buy a carved bracket KRPU-021 in the quantity of 2 pieces of the selected size.

If none of the three pairs looks convincing, it is better not to adjust the wall to KRPU-021, but to open the section to buy decorative polyurethane brackets and choose a different scale or pattern — or leave the box without additional decor.