KON-005 partition kit: wooden enamel partition for room zoning

The KON-005 partition kit is a wooden decorative STAVROS stand for zoning a room, kitchen-living room, studio, hallway, bedroom, office, or commercial interior. This element is chosen when you need not a solid wall, but a light interior boundary: it separates zones, lets light through, preserves air in the room, and looks like a thoughtful part of the finish.

A buyer often starts with a simple query: "buy wooden partition" or "buy wooden partition for zoning." But behind this query lies not the same task. One person needs to separate part of the bedroom from the living room in a studio. Another needs to separate the entrance area from the sofa group. A third needs to design a restaurant hall, beauty salon, office meeting room, or showroom. KON-005 is suitable for exactly these scenarios: from several vertical stands, you can assemble a decorative partition for a specific opening width and the desired visual rhythm.

The main thing to understand before purchasing: one KON-005 kit is not the entire partition for the whole room, but one vertical decorative element. A full partition is assembled from several such kits. The quantity depends on the width of the zone, the chosen spacing between stands, the desired density, ceiling height, mounting method, and usage scenario.

KON-005 is especially interesting for enamel projects. The partition can be matched to the color of walls, doors, furniture, kitchen cabinets, wall panels, or made accent: white, graphite, beige, complex green, blue, warm gray. Unlike a random slat, this is a ready-made decorative wooden kit with expressive geometry that can be used in residential and commercial interiors.

KON-001 Partition Kit

from 362.43 $

Partition kit KON-002

from 504.03 $

Partition set KON-003

from 648.20 $

Partition kit KON-004

from 447.95 $

Partition kit KON-005

from 387.50 $

Partition kit KON-007

from 470.97 $

Go to Catalog

KON-005 partition kit: what is this product

KON-005 is a kit for assembling one vertical decorative stand. In the product card, it is described as a ready-made selected composition consisting of a wooden axis MLD-060 and geometric shapes KN. The kit is supplied disassembled, and the elements are assembled into a single stand.

This is the difference between KON-005 and a simple slat. A regular slat is a straight bar or linear element. It can be functional, but by itself it rarely creates a complex decorative pattern. KON-005 works differently: the vertical axis is complemented by geometric shapes, making the stand look not like an ordinary slat, but like an interior module with rhythm, volume, and plasticity.

The size of the KON-005 kit is 2800 × 120 × 34 mm. This is an important parameter: the height of 2800 mm allows considering the product for rooms with high ceilings or for trimming and adapting to a specific project, but any fitting work must be agreed upon with a master in advance. The width of 120 mm affects the visual density of the partition. The thickness of 34 mm is important for volume perception, mounting, and joining with other elements.

The product card specifies beech and oak materials. For beech, preparation for enamel is provided; for oak, a tinting option is available. This is not just a decorative formality. For enamel, one finishing scenario is chosen: the color covers the wood grain, and the silhouette, geometry, and relief become the main focus. For tinting, another scenario is chosen: the wood remains visible, and the material's texture begins to play an important role.

Watch video ...

KON-005 specifications for selection

Our factory also produces:

Wooden Decor N-425R

from 11.83 $

Wooden Socket R-061

from 16.46 $

Carved Furniture Leg MN-034

from 98.90 $

Wooden Baluster L-005

from 136.07 $

Wooden Decor N-493R

from 13.25 $

Decorative element N-434.1

from 47.46 $

Corner decorative element MLD-3U-2.1R

from 40.13 $

Stucco decor set CPU-11-2

from 172.85 $

View Full Product Catalog

Why KON-005 is not an ordinary wooden slat

A wooden slatted partition can be assembled from simple vertical slats. This is a common solution: slats are placed with equal spacing, creating a light-permeable boundary between zones, and painted in the desired color. But such a partition has a limitation: if the slat is simple, the entire composition relies only on the step frequency and color.

KON-005 provides a different effect. It is not just a rectangular element, but a decorative post with geometric shapes on its axis. It has volume, alternating forms, and a more complex silhouette. Therefore, it is suitable not only for basic space division but also for an interior design task: making the partition a visible part of the design.

If a maximally calm background is needed, a simple slat may be sufficient. However, if the partition should become an accent, support furniture, connect the entry area with the living room, add graphics to the kitchen-living room, or create an expressive rhythm in a commercial space, KON-005 looks more interesting than random linear elements.

There is another difference — the complete set logic. The buyer does not choose abstract meters of slats, but a specific product with size, material, preparation, and composition. This simplifies planning: you can calculate the number of vertical posts, spacing, total zone width, and the visual density of the future partition.

How to tell if KON-005 suits your interior

Before buying a wooden partition for zoning, you need to determine what problem it solves. The partition should not appear in the room just because "it looks nice." It should improve the layout: separate, guide movement, hide part of the space, create a backdrop, make the interior more cohesive.

KON-005 is suitable if you need to mark a boundary but not build a wall. For example, a kitchen-living room should remain unified, but the dining area asks for separation from the sofa zone. Or the hallway is open to the living room, and the entrance area looks too bare. Or in a studio, you need to separate the sleeping area without a heavy structure. In such cases, a wooden partition works gently: it divides but does not close off.

The second criterion is style. KON-005 looks good where geometry, vertical rhythm, and natural material are appropriate. With enamel, the kit can be integrated into both modern interiors and neoclassicism, as well as more subdued custom finishes. If you paint the posts the color of the walls, the partition will become an architectural part of the space. If you choose a contrasting color, it will become an accent.

The third criterion is the height and scale of the room. A size of 2800 mm provides a noticeable vertical. In a room with a low ceiling, you need to carefully calculate the installation, trimming, and visual density. In a tall room, such a rack can look natural and elongate the space. In any case, the final dimensions and installation method must be agreed upon before ordering.

The fourth criterion is maintenance and operation. A partition made of decorative racks has volumetric elements. In a living room, this is simple, but in a restaurant, salon, or office, you need to consider regular cleaning, contact with visitors, the risk of impacts from bags or carts, and foot traffic. The more active the area, the more carefully you need to plan the spacing, fastening, and coating.

Where to use a wooden partition under enamel

KON-005 can be used in different spaces, but in each case, the partition solves its own task. One thing is a light boundary in the bedroom, another is a rhythmic partition in a restaurant, and a third is an accent in an office. Below are the main scenarios where the KON-005 partition kit is especially appropriate.

Kitchen-living room

A kitchen-living room often suffers from one problem: the space is large and open, but the zones are not always readable. The sofa, table, kitchen, passage, TV area, and window can exist in one plane, causing the interior to seem blurred. A wooden partition helps create a clear boundary without a blank wall.

KON-005 can be used between the kitchen and sofa group, between the dining table and passage, next to the kitchen island, or at the entrance to the living room. If the partition is painted in the color of the kitchen, it supports the set. If in the color of the walls, it dissolves into the architecture. If in a contrasting shade, it becomes a decorative accent.

In a kitchen-living room, it is especially important to preserve light and visibility. The partition should not turn the room into narrow sections. Therefore, the spacing between the racks is chosen not only for aesthetics but also based on how much light needs to be retained. For dense zoning, the spacing is made smaller. For a light decorative rhythm, it is made larger.

Studio and apartments

In a studio, a partition is often needed to separate the sleeping area, workspace, or entry zone. A blank wall can take away light and visually shrink the room. A light wooden partition works differently: it creates a psychological boundary but does not make the room feel cramped.

KON-005 can be placed between the bed and living room, near the desk, or next to the hallway area. Under enamel, the racks can easily be matched with doors, walls, furniture, or kitchen facades. For example, white enamel will support a light interior, graphite will add a strict contrast, and a beige shade will make the partition soft.

For the studio, it's important to get the density right. If the posts are placed too frequently, the room can feel visually smaller. If too sparse, the partition loses its purpose. It's better to decide in advance whether privacy is needed or just a zone designation.

Hallway and entry area

In many apartments, the front door opens almost directly into the living room. In this case, the hallway looks like part of the living area, and clothes, shoes, mirror, and console are in full view. A wooden partition helps separate the entrance without creating a dark corridor.

KON-005 can be used as a light boundary between the entrance and the sofa group, between the hallway and the kitchen-living room, next to a wardrobe system. If the partition is painted the same color as the doors or built-in furniture, it doesn't look like a random post but part of the overall joinery composition.

In the hallway, practicality must be considered: people pass through with bags, outerwear, and suitcases. The posts should not obstruct movement. The mounting must be reliable, and the coating should be designed for regular contact and cleaning.

Bedroom and dressing room

In the bedroom, a partition can separate the dressing room, vanity table, work corner, or bed area. Unlike a wardrobe or screen, a stationary decorative partition looks more architectural. It can become part of the headboard, a side boundary of the bed, or a soft transition to the dressing area.

For the bedroom, calm colors are often chosen: milky, beige, light gray, muted green, or the shade of the walls. KON-005 under enamel allows it not to conflict with textiles but to support the overall tone. If the interior is more graphic, the posts can be made dark — then they will provide an expressive vertical rhythm.

In the dressing area, privacy is important. If you need to hide clothes and shelves, the spacing between posts should be smaller or combine the partition with other solutions: a curtain, glass, panels, or furniture. If the task is only to mark the boundary, a lighter interval can be left.

Study and workspace

A workspace in an apartment or house often lacks a separate room. It is placed in the living room, bedroom, on the loggia, or in a niche. A partition helps separate the desk from the rest of the space and creates the feel of a study without major renovations.

KON-005 can be placed next to the desk, behind the seated person, or to the side of the storage area. The partition adds visual cohesion and can serve as a backdrop for video calls. Under enamel, it can be easily paired with shelves, a desk, or wall panels.

A dense partition is not always necessary for a study. Often, a medium spacing between posts is sufficient: the work area gets a boundary, but light and air are preserved. If you need to hide documents, equipment, or shelves, you can choose a more frequent rhythm.

Office, meeting room, and waiting area

In an office, partitions help divide space without building solid walls. This is relevant for meeting areas, workstations, reception desks, waiting areas, executive offices, open spaces, and showrooms. A wooden partition looks warmer than glass and softer than metal structures.

KON-005 can be used as a decorative screen, visual boundary, backdrop for a waiting area, or to separate a meeting table from the passage. Under enamel, the posts can be painted in a corporate color, wall color, or furniture color. This helps integrate the partition into a commercial interior without feeling like a temporary structure.

In an office, mounting is especially important. People walk past, touch the partition, and may bump it with chairs or bags. Therefore, installation, spacing between posts, and stability need to be considered before ordering.

Restaurant, salon, boutique, and showroom

In a commercial interior, a partition often works not only as a functional boundary but also as part of the atmosphere. In a restaurant, it can separate seating areas. In a beauty salon, it can divide work zones. In a boutique, it can create a backdrop for a display. In a showroom, it can guide visitor traffic.

KON-005 is valued here precisely for its decorative quality. A simple slat can look too technical, while a set with geometric shapes provides a more expressive pattern. Under enamel, the partition can be made light, dark, accent, in brand color, or matching furniture tones.

For a restaurant and salon, you need to consider cleaning, traffic, frequent contact, and light. If the partition is near seating areas, the spacing should be safe and comfortable. If it is in a display window or showroom, a more dynamic rhythm can be created.

How to calculate the number of KON-005 kits

The main practical question: how many KON-005 kits do you need to buy? The answer depends on the width of the area and the chosen spacing between posts. Since one kit is one vertical decorative post, the partition is assembled from several kits.

The basic formula is simple:

Number of posts = width of area / chosen spacing between posts

But this formula cannot be applied mechanically. You need to consider from which point to which point you measure the width, whether the partition will go from wall to wall, whether there will be a passage, whether there is a baseboard, how level the floor and ceiling are, and what gaps are needed for mounting.

For example, if you need to design a section 1800 mm wide and the chosen spacing between post centers is 300 mm, approximately 6 posts will be needed. But after marking, it may turn out that the outer posts need to be shifted, a gap from the wall left, the baseboard accounted for, or the rhythm changed for symmetry. Therefore, the calculation always starts with a diagram.

For dense zoning, the spacing is made smaller. This way the partition blocks the view more strongly, better separating a bedroom, dressing room, or workspace. For a light decorative effect, the spacing is made larger: more light, the view is preserved, and the partition works as rhythmic graphics.

It is important to consider not only the number of posts but also the appearance. Sometimes a mathematically correct spacing results in unattractive edge distances. It is better to slightly change the interval so that the edge gaps are equal. Symmetry is especially important if the partition is in plain sight: in a living room, restaurant, hall, or office.

Before ordering, it is useful to make a simple marking on the floor with painter's tape. Mark the width of the area, the passage, the location of the first and last post, and the intended spacing. Look from different points in the room: from the entrance, from the sofa, from the kitchen, from the window. The partition should look good not only on the plan but also in real view.

What step between posts to choose

The step between posts determines the character of the partition. The same KON-005 can look different: a dense decorative wall, a light screen, or a rare interior rhythm. Therefore, the step is chosen based on the task, not a random distance.

Small step: more privacy

A small step is suitable when you need to block the view more. This includes a bedroom in a studio, a wardrobe area, a workspace, an office, part of a salon, or a waiting area. The more often the posts are placed, the denser the partition feels.

But a small step has a downside. In a small room, too frequent a rhythm can weigh down the space, especially if the posts are painted in a dark color. Therefore, in small rooms, the density should be checked during layout: sometimes it's better to make part of the partition denser and part lighter.

Medium step: a universal solution

A medium step is suitable for a kitchen-living room, hallway, studio, office, or workspace. It creates a noticeable boundary but does not block light. Such a partition works well in most residential scenarios.

A medium step is convenient to combine with the color of walls or furniture. If the partition is white or beige, it looks softer. If it is graphite or dark, even a medium step will be perceived as more active. Therefore, the color and step should be chosen together.

Large step: more light and air

A large step is suitable when privacy is not needed, but a decorative rhythm is. For example, a partition at the entrance to the living room, next to a kitchen island, in a showroom, restaurant, or salon. It marks a boundary but hardly blocks the view.

A large step is good in small spaces where you can't overload the area. But it won't work if you need to hide a bed, wardrobe, or workspace. The buyer must honestly answer themselves: is the partition for beauty, zoning, or privacy? The distance between the posts depends on this.

Why KON-005 is suitable for enamel

A partition under enamel is an opportunity to control color. Wood becomes the basis of the form, and the interior gets the desired shade. This is especially important for KON-005: geometric shapes and the vertical axis are well read in paint, and color helps connect the posts with the room.

White enamel is suitable for light interiors, neoclassicism, bedrooms, kitchen-living rooms, and hallways. Such a partition looks light, especially if the walls and ceiling are also light. It doesn't steal attention but adds relief and vertical rhythm.

Beige, milky, sand, or warm gray enamel helps make the partition soft. This is a good option for a bedroom, living room, beauty salon, or waiting area. The posts become part of the calm finish and don't look like a sharp accent.

Graphite, dark blue, deep green, or black enamel creates expressive graphics. This option is suitable for a modern interior, restaurant, showroom, office, or kitchen with dark accents. But a dark partition has a stronger impact on the space, so the step between posts should be chosen more carefully.

Enamel in the color of the walls makes the partition architectural. It doesn't argue with the interior but looks like a continuation of the finish. Enamel in the color of the furniture connects the partition with the wardrobe, kitchen, doors, wall panels, or baseboard. Enamel in a contrasting color turns KON-005 into a decorative object.

It's important to remember: the painting and coating technology must be thought out before assembly. The KON-005 card states that the manufacturer recommends painting or tinting only after full assembly and installation of all elements. This is because the paint layer can affect the mounting channels and complicate installation. Therefore, the order of work should be agreed upon with the craftsman in advance.

Materials: beech, oak, and finishing options

The KON-005 card lists beech and oak. These are two different selection scenarios. Beech in the enamel version is suitable when the main goal is to get a painted decorative partition with a clean silhouette. Oak in the tinting version is interesting where wood texture and a more pronounced natural character are important.

Beech under enamel is a rational choice for projects where the posts will be painted white, beige, gray, graphite, or another color. In this case, wood texture is not the main decorative effect. Geometry, sanding, preparation, careful assembly, and quality coating are more important.

Oak under tinting is appropriate if the partition should showcase the wood. For example, the interior is based on natural materials, and there is oak flooring, furniture, panels, or doors nearby. Then tinting can connect the partition with the overall joinery part of the room.

Finishing options depend on the interior task. Oil emphasizes the natural wood texture. Enamel provides color and integrity. Tinting with stains allows changing the shade while preserving the feel of wood. Clear varnishes protect the surface and leave the material visible. Patina can highlight the relief if it is stylistically appropriate.

You cannot choose a material solely based on the principle "oak is always better." For enamel, beech may be more logical. For tinting, oak may be more expressive. For a commercial interior, wear, maintenance, color, light, and usage scenario are also important. The current material, preparation, and availability should be checked in the KON-005 card before ordering.

How to attach a wooden partition to the floor and ceiling

Installing a partition is not a stage where you should improvise. Even the most beautiful decorative post must be properly installed. KON-005 is supplied disassembled, and the figures are fixed onto a wooden axis. The card indicates that wood glue may be used for assembly, as well as temporary fixation with painter's tape during glue polymerization; additionally, micro-pins may be used during installation.

For the buyer, the most important thing is to understand the general sequence. First, determine the location of the partition and its width. Then mark the position of each post. After that, check the verticality, spacing, distance to walls, furniture, doors, baseboards, and passage. Only then proceed to assembly and fastening.

Attachment to the floor and ceiling depends on the base. Concrete, wood, tile, parquet, laminate, suspended ceiling, drywall, embedded elements — all these are different conditions. There is no one universal method for all rooms. Before purchasing, you need to understand exactly where the partition will be attached and what loads it will experience.

If there is a baseboard in the room, it must be accounted for in advance. The post may not fit flush against the wall or floor as intended in the plan. Sometimes the baseboard is trimmed, sometimes a technological gap is left, sometimes the position of the end posts is changed. It is better to decide this before ordering, not during installation.

The floor and ceiling may be uneven. At a height of 2800 mm, even a slight deviation is noticeable. Therefore, before installation, it is important to check the verticality and actual height at several points. If the posts need to be trimmed, this should be done by a professional, taking into account the kit's design and future finishing.

Finish painting is usually associated with assembly. If you paint elements in advance, the paint layer can complicate the fitting of parts. If you paint after assembly and installation, it's easier to achieve a seamless look, but you need to work carefully around the floor, ceiling, and adjacent surfaces. The choice of technology depends on the project.

Calculating a partition for different rooms

Calculating a partition always starts with its function. You cannot calculate the structure the same way for a bedroom, a kitchen-living room, and a restaurant. Each space has its own distances, views, lighting, movement, and privacy requirements.

For a kitchen-living room, the calculation is usually done for the section between zones, not the entire width of the room. For example, a partition can start from the wall and extend to the edge of the sofa, but not block the passage. It's important to leave a convenient path from the kitchen to the table, from the entrance to the living room, and from the window to the work area.

For a studio, the partition is often calculated around the sleeping area. Here, it's important to decide whether to completely hide the bed or just mark its area. If the bed needs to be hidden, the spacing is made smaller. If a visual boundary is enough, the partition can be made lighter.

For a hallway, not only the width but also the movement of people is considered. You need to pass with a bag, hang clothes, open a closet, and take off shoes. The partition should not interfere with these actions. Therefore, sometimes it's better to install fewer posts but maintain a comfortable passage.

For a bedroom and dressing room, height and visibility are important. If the dressing room is open, the partition should hide at least part of the shelves. If it's just a decorative separation for a vanity table, a sparser rhythm can be chosen.

For a restaurant and salon, seating areas, passages, safety, and cleaning are considered. The partition should not interfere with waiters, masters, clients, or visitors. In a commercial interior, it's especially important that the posts are securely fastened and do not create awkward corners in the passage.

For an office, visibility and acoustics are considered. A wooden partition does not replace full sound insulation, but it helps visually separate zones. If noise reduction is needed, it must be combined with other solutions. If only a boundary is needed, KON-005 can work as a standalone decorative screen.

KON-005 and other KON kits: what to choose

In the STAVROS catalog, next to KON-005, there are other partition kits. They should be viewed not as competitors, but as options for different tasks. It is useful for the buyer to compare the visual rhythm, size, composition, density, and application scenario.

Partition kit KON-003 can be considered when a different decorative character of the stand and a different visual rhythm are needed. It is not suitable for all the same tasks as KON-005, so comparison should be made based on the product card, dimensions, and overall appearance.

Partition kit KON-004 are chosen if a different partition pattern and a different composition of the vertical element are needed. If there is already a separate task or article for KON-004, KON-005 is better considered as an independent model with its own scenario.

Partition kit KON-006 may be of interest when the buyer is comparing several modular solutions and looking for a more suitable composition. Before ordering, you need to open the product card and check the dimensions, materials, composition, and ordering conditions.

Partition kit KON-007 should be looked at if a different visual rhythm and different plasticity of the stand are needed. For a large room, commercial interior, or accent partition, comparing several KON models helps to choose a more precise solution.

It is logical to choose KON-005 when you need a wooden partition made of beech under enamel with dimensions of 2800 × 120 × 34 mm and a decorative geometric stand. If the task is a simple background slat, you can consider slatted panels made of wood and MDFIf you need exactly a complete stand with a decorative axis, KON-005 looks more expressive.

What to combine KON-005 with in the STAVROS interior

A partition rarely lives alone. To prevent it from looking like a random structure, it needs to be connected with other interior elements: furniture, wall panels, slats, hardware, finishes, door color, and baseboards.

If the room already has wooden elements, KON-005 can be supported with products from the general section Solid Wood Items. This helps to assemble the interior not from disparate parts, but from a unified joinery logic.

If slats or panels are used nearby, the partition can be linked to the section slatted panels made of wood and MDF. For example, part of the wall is finished with panels, and the partition continues the vertical rhythm in the space. It is only important not to overload the room: if there are already many verticals on the wall, it is better to make the partition posts calmer in color.

Installation may require Mounting and finishing materials. The specific set depends on the base, fastening technology, and chosen coating. Do not buy materials at random: it is better to coordinate them with the craftsman.

If the partition is connected to furniture, you should also look at furniture hardware. This is especially important for projects where KON-005 stands next to cabinets, dressers, nightstands, display cases, or kitchen modules. The color, material, and style of the hardware should support the overall composition.

In a kitchen-living room, the partition can be linked to the kitchen facades. In a bedroom, to the wardrobe and headboard. In a hallway, to the doors and closet. In an office, to the reception desk and work tables. In a restaurant, to the furniture, bar area, and decorative walls. The clearer this connection, the more expensive and calmer the interior looks.

Mistakes when buying a wooden partition

The first mistake is thinking that one KON-005 set covers the entire opening. One set is one decorative vertical post. A full partition requires several sets. The quantity is calculated based on the width of the zone and the spacing between posts.

The second mistake is buying without calculating the spacing. If the spacing is too small, the partition can overload the room and block light. If it's too large, it won't provide the desired zoning. The spacing should be chosen before ordering.

The third mistake is not considering the ceiling height. The KON-005 size is 2800 mm, but the actual room height may differ. You need to determine in advance whether trimming will be needed, how the ceiling is constructed, whether there are embedded elements, and whether a stretch ceiling interferes.

The fourth mistake is forgetting about the baseboard. The baseboard affects the connection to the wall and floor. If it's not accounted for, the end post may not be positioned as planned.

The fifth mistake is not planning the enamel color. A white, beige, graphite, dark, or colored partition affects the space differently. The color should be chosen together with the spacing and lighting.

The sixth mistake is placing a partition in a walkway without checking traffic flow. In a residential interior, this is inconvenient; in a commercial one, it's also risky. You need to check people's movement paths in advance.

The seventh mistake is choosing a partition without a zoning scenario. If it's unclear what exactly it separates, the structure will look like a decorative accident.

The eighth mistake is comparing KON-005 only with simple slats. If a simple background partition is needed, slats may suffice. But if a decorative module with geometry is required, KON-005 solves a different problem.

The ninth mistake is painting elements without considering assembly. The product card states that painting or tinting is recommended after full assembly and installation. This point must be considered to ensure the paint layer does not complicate assembly.

The tenth mistake is not clarifying the current ordering conditions. Availability, lead time, material, preparation, price, and configuration may change. Before purchasing, you should check the product card or ask a STAVROS manager.

Who the KON-005 partition kit is suitable for

KON-005 is suitable for those who want to buy a wooden room partition not as a temporary screen, but as part of interior architecture. It is a solution for people who value zoning without a solid wall: light remains, air is preserved, but the space becomes more organized.

The kit is suitable for studio apartments where you need to separate a bedroom, workspace, or hallway. It is suitable for a kitchen-living room where you need to divide functional zones. It is suitable for a bedroom with a dressing room, study, hall, living room, or relaxation area.

KON-005 will be useful for designers and furniture workshops. From several posts, you can assemble a partition for a specific opening, color, rhythm, and interior task. This is more convenient than designing a decorative post from scratch each time.

The kit is suitable for commercial spaces: restaurants, salons, boutiques, showrooms, offices, waiting areas. Where you need to divide the space and simultaneously make it expressive, a decorative wooden partition works better than a random screen or solid partition.

KON-005 is especially appropriate in interiors where natural materials, geometry, vertical rhythm, and the possibility of painting are valued. Under enamel, it can be an almost invisible architectural element or a bright accent.

Who should choose a different solution

If full privacy, soundproofing, or blocking light from an area is needed, KON-005 will not replace a solid wall. A slatted decorative partition divides visually but remains permeable. For a bedroom, bathroom, office with confidential conversations, or utility room, a different solution may be required.

If the interior is based on absolute minimalism without decorative details, the geometric shapes of KON-005 may be too expressive. In that case, it is better to consider simpler slats or smooth panels.

If the room is very small and dark, a too dense partition can worsen the sense of space. This does not mean KON-005 cannot be used, but the spacing, color, and installation location must be chosen especially carefully.

If there is no possibility to properly secure the posts to the floor and ceiling, it is better to postpone the purchase until consulting with a specialist. The decorative partition must be stable. You cannot rely only on the visual effect.

If you need a mobile screen, KON-005 is also not the best option. This is a set for a stationary decorative partition. For temporary space division, you should choose other designs.

Where to buy the KON-005 STAVROS partition set

You can buy the KON-005 partition set on the STAVROS product page: Partition kit KON-005. Before placing an order, open the size chart and check the material, preparation, availability, status, production time, price, and purchase conditions.

If you are still choosing the partition format, start with the section wooden elements of the STAVROS constructor. There you can compare several KON sets and understand which rhythm best suits a room, studio, office, or commercial interior.

Before ordering, prepare the dimensions of the area: partition width, ceiling height, passage space, distance to walls, furniture, doors, and baseboards. Determine the desired spacing between posts. After that, you can calculate the approximate number of sets.

If you want to buy a wooden partition for room zoning but are unsure about the quantity, it is better to contact the STAVROS manager with the dimensions and a description of the task. For the buyer, this reduces the risk of error: you can clarify the material, preparation for enamel, time, configuration, and related products.

When choosing, do not limit yourself to one product card. Compare KON-005 with neighboring sets, look at slatted panels, installation and finishing materials, and fittings. A good partition is not only posts but also the right color, fastening, rhythm, connection to the floor and ceiling, and harmony with the interior.

Practical checklist before ordering

Measure the width of the area you need to close or mark. Do not count the entire room if the partition is only needed in the section between the sofa and kitchen, bed and living room, hallway and hall.

Check the ceiling height at several points. The size of KON-005 is 2800 mm, but the room may have variations. If trimming is needed, coordinate it with the craftsman.

Decide what level of privacy is needed. For a bedroom or dressing room, the step can be smaller. For a kitchen-living room and hallway, medium. For a decorative effect, larger.

Choose the coating color. KON-005 enamel can match the color of walls, doors, furniture, or be made accent.

Calculate the number of posts. Use the formula: area width / selected step = approximate number of sets. After that, check symmetry and edge offsets.

Consider the baseboard, floor, and ceiling. The junction should be thought out before ordering.

Check the product card. Clarify the material, preparation, status, delivery time, price, ordering conditions, and configuration.

Coordinate installation. The base, fastening, glue, assembly order, and painting depend on the specific room.

Select related products. If necessary, look at installation and finishing materials, fittings, slatted panels, and other STAVROS elements.

FAQ: customer questions about KON-005

What is the KON-005 partition kit?

KON-005 is a wooden STAVROS kit for assembling one vertical decorative post. It consists of a wooden MLD-060 axis and KN geometric shapes. Several such posts can be used to assemble a partition for zoning a room, kitchen-living room, studio, hallway, office, or commercial interior.

Is one KON-005 kit the entire partition?

No. One KON-005 kit is one vertical decorative post. To assemble a full partition, you need to purchase several kits. The quantity depends on the width of the area and the chosen spacing between posts.

What is the size of KON-005?

The size of the KON-005 kit is 2800 × 120 × 34 mm. Before ordering, you need to compare this size with the ceiling height, area width, and chosen installation method.

What material is KON-005 made of?

The product card specifies beech and oak. For beech, an enamel option is available; for oak, a tinting option. The current material, availability, and preparation should be checked in the product card before ordering.

What does 'for enamel' mean?

This means the product can be considered for painting with an opaque coating in the desired color. Under enamel, the partition is often made white, beige, gray, graphite, matching the color of walls, doors, or furniture. The painting technology must be coordinated with the master.

How many KON-005 kits need to be purchased?

The approximate quantity is calculated using the formula: zone width / selected spacing between posts. But then you need to check symmetry, edge offsets, baseboard, passage, and actual room height. If in doubt, it's better to clarify the calculation with a STAVROS manager.

What spacing between posts should be chosen?

For greater privacy, choose a smaller spacing. For a kitchen-living room and studio, a medium spacing is often suitable. For a light decorative effect and preserving light, a larger spacing is used. The exact spacing depends on the zone width, partition color, lighting, and zoning task.

Can KON-005 be used in a kitchen-living room?

Yes, KON-005 is suitable for zoning a kitchen-living room. It can be placed between the dining and sofa area, next to an island, at the entrance, or between the kitchen and living room. It's important to maintain a convenient passage and not block the light.

Is KON-005 suitable for a studio?

Yes. In a studio, the kit can be used to separate a sleeping area, workspace, or hallway. It helps create a boundary without a solid wall and preserves a sense of airiness.

Can KON-005 be used in a restaurant, salon, or office?

Yes, KON-005 is suitable for commercial interiors: restaurants, salons, boutiques, showrooms, offices, and waiting areas. In such projects, it is especially important to consider the mounting, spacing, color, cleaning, and safety of passages.

How to attach the partition to the floor and ceiling?

The mounting method depends on the base, height, installation location, and operating conditions. You need to check the floor, ceiling, presence of baseboards, embedded elements, and passages in advance. It is better to coordinate the installation with a specialist. The product card also describes the assembly of elements on a wooden axis.

When is it better to paint KON-005?

The product card states that painting or tinting is recommended after complete assembly and installation of all elements. This is because the paint coating can increase the fitting dimensions and complicate installation. The specific technology should be coordinated with a finishing specialist.

How is KON-005 different from a regular slatted partition?

A regular slatted partition is often assembled from simple vertical slats. KON-005 is a decorative stand kit with a wooden axis and geometric shapes. It provides a more expressive rhythm and is suitable for interior projects where the partition should be not only a boundary but also a decorative element.

Where to buy the KON-005 partition kit?

The kit can be selected in the product card Partition kit KON-005 on the STAVROS website. To compare other solutions, see the section wooden elements of the STAVROS constructor.

Conclusion

The KON-005 partition kit is a solution for those who want to buy a wooden partition not as a random slat, but as a well-thought-out decorative stand for zoning. It is suitable for a room, kitchen-living room, studio, hallway, bedroom, dressing room, study, office, restaurant, salon, and showroom.

The main value of KON-005 lies in the combination of practicality and interior effect. The partition divides the space but does not turn it into a set of closed rooms. It preserves light, air, and visibility, while adding vertical rhythm, geometry, and the feel of a joinery detail.

Before purchasing, it is important to correctly calculate the number of kits, choose the spacing between the stands, check the ceiling height, consider the enamel color, account for the baseboard, and the mounting method. One kit is one decorative stand, and the entire partition is assembled from several elements.

On the STAVROS website, you can select the KON-005 partition kit, compare it with other KON kits, choose related materials, and assemble a solution for a specific interior. If you have questions about quantity, material, preparation for enamel, lead time, or installation, it is best to check the current parameters in the product card or with a STAVROS manager.