Buy the classic Marseilles console: 006-002 width 470 mm or 006-003 width 1000 mm — which to choose

Marseilles Console 006-002

from 904.07 $

Go to Catalog

Why choose a ready-made Marseilles console

Both Marseilles consoles provide a ready-made classic foundation for an entryway, bedroom, living room, or hall: same depth of 470 mm, height of 930 mm, beech and white enamel RAL 9010. The main difference is the width. The compact 006-002 takes up 470 mm of wall space and fits a narrow wall section. The 006-003 model, 1000 mm wide, creates a full furniture zone for a large mirror, table lamps, and decor.

A ready-made item, not a set of parts No need to separately select the underframe, tabletop, and decorative elements: the model's proportions are already coordinated.

One style, two sizes You can choose a compact or wide console without changing the classic character of the Marseilles collection.

Same depth of 470 mm The comparison is primarily based on the width of the wall, not on different depths or heights of the furniture.

Height 930 mm You can conveniently place a lamp, vase, key holder, or decorative items on the tabletop, but the furniture cannot be replaced by a desk.

White enamel RAL 9010 The light finish emphasizes the carved silhouette and helps tie the console to white doors, baseboards, or frames.

Short answer: Marseilles 006-002 should be chosen for a wall section approximately 700–800 mm wide when a compact surface for keys, a small lamp, or a vase is needed. Marseilles 006-003, 1000 mm wide, is better suited for a free wall and a composition with a large mirror. The wall width guideline is not a technical standard: before ordering, measure the trim, passage, baseboard, and adjacent doors.

Buy Marseilles 006-002 Buy Marseilles 006-003

Buy the classic Marseilles console It's easier when the choice starts not from a photo, but from a wall. Models 006-002 and 006-003 are similar in design, material, depth, and height, but solve different spatial problems. The first works as a compact piece in a narrow niche. The second requires a free wall and creates a horizontal furniture zone that can be paired with a large mirror, lights, and decor.

The difference in width is 530 mm. This is more than the width of the compact model entirely. Therefore, 006-003 cannot be considered just a "slightly enlarged" version of 006-002. It occupies more than twice the wall space, has a stronger impact on the passage, and requires a different mirror scale. Conversely, 006-002 cannot always replace a meter-long console: on a large empty wall, it may look random and get lost without vertical decor.

Both models have a depth of 470 mm. For a spacious living room, this is a moderate size, but for a narrow hallway, it is a parameter that needs to be checked especially carefully. After installation, there should be enough space for passage, opening doors, and movement of a person in outerwear. The console should not force you to walk around it sideways or constantly hit the tabletop with a bag.

Watch video ...

Confirmed specifications of Marseilles 006-002 and 006-003

The material, color, and dimensions match the current product cards. The price in the article should not be fixed: it may change. Before purchasing, it is better to open the card, check the active configuration, delivery time, and order terms.

Our factory also produces:

74.13 $ р.

from 75.39 $

Decor Set C-015

from 91 $

Geometric Furniture Leg MN-121

from 45.50 $

Turned Furniture Leg MN-023

from 10.61 $

Geometric furniture leg MN-214

from 18.05 $

Wooden baseboard / casing / cornice PLT-006

from 20.25 $

Decorative element MLD-1-1.1

from 14.52 $

Stucco decoration set CPU-7-1

from 261.30 $

View Full Product Catalog

Which Marseilles console to buy: the main difference

Marseilles 006-002: compact model 470 × 470 mm

Model 006-002 is almost square in plan: width and depth are 470 mm. This makes it perceived as a small independent object, not a long shelf against the wall. The console fits a pier between doorways, a hallway corner, an area near the stairs, or a compact bedroom.

When 470 mm width is convenient

This size helps utilize a wall where meter-long furniture does not fit. But the free pier must be wider than the console itself. If the tabletop almost touches the trim, the object looks cramped, and cleaning and opening doors become inconvenient. A practical guideline of 700–800 mm provides side clearance, but the exact solution depends on the width of the trim and the door placement.

What to place on a compact tabletop

On a 470 × 470 mm surface, one main item works best: a small lamp, vase, sculpture, decorative bowl, or key holder. Several small accessories quickly create clutter. If the console is used in a hallway, it is worth deciding in advance where to place keys and not turning it into permanent storage for mail, gloves, and bags.

How to support 006-002 on the wall

A narrow console can be paired with a vertical mirror, sconce, or elongated frame. The vertical element compensates for the furniture's small width and makes the composition taller. On a large wall without such an element, the console may look too small.

For a compact wall space, you can buy a compact console Marseilles 006-002, after checking the passage depth and free space on the sides.

Marseilles 006-003: wide model 1000 × 470 mm

Model 006-003 has the same depth and height, but the width of 1000 mm changes its role. This is already a full-fledged horizontal surface for a mirror, two table lamps, a vase, or a symmetrical group of decor. It looks better on a free wall in the living room, bedroom, hall, or spacious hallway.

Why a meter width requires a separate wall

The countertop needs free margins on the sides, distance to trim, and visual allowance. A wall exactly 1000 mm wide is not suitable: furniture will hit the boundaries. The practical area should be noticeably wider, and the exact allowance is determined by adjacent doors and decor.

How to use a wide surface

006-003 allows building a composition around the center. For example, place two lamps on the edges, a vase in the middle, and small accessories between them. Another option is one large lamp and a group of two or three items. The main thing is not to fill the entire length with small objects.

When 006-003 may be too large

In a narrow hallway, a meter-long console takes up a long section of the passage. Even with a depth of 470 mm, a person will walk next to the protruding countertop longer than near a compact model. If a closet door or front door opens nearby, the risk of collision increases.

For a free wall and a large composition, you can buy a wide console Marseilles 006-003, after checking the wall length, passage, and size of the future mirror.

How to measure the wall before ordering

The size of the console is only the first parameter. The buyer should measure not an abstract wall, but the actual installation area with all trims, sockets, baseboards, and doors. An error of a few centimeters can make the furniture uncomfortable even when it formally fits.

Full width of the free area

Measure the distance between real obstacles: trim, corner, cabinet, radiator, or wall protrusion. Do not use the total length of the room. For 006-002, an area wider than 470 mm is needed; for 006-003, wider than 1000 mm. Free spaces prevent the furniture from looking cramped and simplify cleaning.

Passage depth

Both models protrude from the wall by 470 mm. Measure the remaining distance to the opposite wall, cabinet, bench, or line of movement. In the hallway, additionally account for outerwear, bags, and the possibility of two people passing each other.

Door leaves

Open adjacent doors to their full angle. Check if the handle and panel trajectory intersects with the console. The situation is especially dangerous when the door passes over the countertop, but the handle hits the decor or mirror.

Baseboard

A tall or protruding baseboard may prevent furniture from being pushed flush against the wall. Then the depth will effectively increase, leaving a gap behind the console. You need to understand in advance whether it is visually acceptable and whether it affects stability.

Sockets and switches

A wide 006-003 can block the socket group or make it inconvenient. Sometimes a socket is needed for a desk lamp, so it is better to keep it accessible. Mark the height and position of all electrical points on the diagram.

Delivery route

Check the front door, elevator, corridor turns, and stairs. Furniture dimensions are given for assembled items; exact packaging and the possibility of partial disassembly should be clarified before delivery. The meter-long model requires more space for maneuvering.

How to maintain a convenient passage

The console in the hallway should help, not create an obstacle. A depth of 470 mm means the furniture noticeably protrudes into the room. When choosing, you need to look not only at the static width of the passage, but also at real movements: taking off a coat, opening a closet, putting down a bag, letting another person pass.

Check the narrow spot

Sometimes the passage narrows not opposite the center of the console, but near a door handle or closet corner. Measure the minimum distance along the entire length of the tabletop. For 006-003 this is especially important because it occupies a meter of wall.

Make a depth layout

Place boxes or stick painter's tape on the floor along the contour of 470 × 470 mm or 1000 × 470 mm. Walk around the mockup for a few days. This test quickly shows where furniture will be bumped by bags and clothing.

Evaluate the cabinet opening

A hinged door, pull-out drawer, or shoe cabinet requires a free zone. The console should not block furniture opposite. If the door opens only partially, the room will be inconvenient every day.

Don't forget about decor

A lamp, vase, or frame can extend beyond the countertop outline. A tall object near the door is more dangerous than the console itself. Plan not only the furniture but also the future composition.

Which console is suitable for a small hallway

For a compact hallway, 006-002 is often more suitable. It takes up 470 mm of wall and creates a spot for keys, a small lamp, or a vase. But even the compact model has a depth of 470 mm, so the decision depends on the width of the passage, not just the length of the wall section.

Wall section between doors

If there is 700–800 mm or more left between the trims, 006-002 can be considered a practical reference. The console will have free fields, and the door leaves should not intersect with furniture. The exact size is checked on site.

Hallway corner

In the corner, it is important to check the baseboard and the adjacent door. A square tabletop of 470 × 470 mm can visually fill the area well, but one edge should not protrude into the main traffic route.

What to store on the console

A compact model does not replace a chest of drawers. It is convenient to leave keys, a small bowl, home fragrance, or one lamp on it. Gloves, bags, and shoes require separate closed storage.

How to avoid a cramped feeling

Do not place a too wide horizontal mirror above 006-002, which will press down on the narrow item. A vertical frame or a compact oval mirror better supports the proportions.

Which model suits a large mirror

For a large mirror, 006-003 is usually more convenient. A width of 1000 mm creates a sufficient horizontal base and allows for a composition with symmetrical items. But the mirror does not have to be narrower than the console: proportions are assessed together with the wall, frame shape, and free fields.

Wide mirror

A horizontal or oval frame pairs well with a meter-long tabletop. The center of the mirror should align with the center of the console, unless the design intentionally calls for asymmetry.

Hanging height

The distance between a tabletop with a height of 930 mm and the lower edge of the frame depends on the size of the mirror and the items on the surface. Too small a gap creates clutter, while too large a gap breaks the connection between the furniture and the wall.

Reflection

Before installation, stand at the main point of the room and check what will be reflected. A mirror above the console may show a door, cabinet, window, or an empty corner. The right reflection makes the composition more useful.

Frame RM-008

The oval RM-008 measures 1246 × 791 mm. Its width is greater than that of 006-002 and noticeably wider than 006-003. Therefore, the frame cannot be automatically considered suitable without checking the wall. For a meter-long console, it can create an expressive composition if there is enough breathing room on the sides. Above a compact model, the frame will be significantly wider than the furniture and will require a particularly careful approach.

Can a console be placed in a bedroom

In a bedroom, a console can serve as a decorative surface under a mirror, lamp, decorations, and small accessories. However, Marseilles should not automatically be considered a vanity table: the 930 mm height and lack of dedicated storage may be inconvenient for seated use.

006-002 in a small bedroom

The compact model fits a narrow area near a window, door, or cabinet. You can place a lamp and a small box on it. If there is a bed nearby, check the passage and drawer opening.

006-003 as a full-fledged zone

The wide model creates space for a large mirror, paired lamps, and a decorative group. It is better suited for a spacious bedroom with a separate free wall.

Can it be used as a desk

The height of 930 mm is higher than a typical desk, and the depth of 470 mm limits the work surface. For constant work with a laptop, the console may be uncomfortable. Its main role is as a standing decorative and auxiliary surface.

Console in the living room and hall

On a free wall in the living room

006-003 often works more convincingly. The meter width matches the scale of the sofa group and a large mirror. On a large wall, 006-002 will require support from a vertical frame, sconce, or group of paintings.

Behind the sofa

A depth of 470 mm can be significant for a passage behind the sofa. Before purchasing, you need to measure the distance between the backrest and the wall. The console should not force the sofa to be moved too far away.

In a hallway

In a spacious hall, 006-003 creates a noticeable classic zone. On the tabletop, you can place a vase, lamps, and seasonal decor. The compact 006-002 is suitable for a small wall section near the stairs or door.

In a commercial interior

In a salon, hotel, or showroom, the console can function as a welcoming decorative surface. It is necessary to consider foot traffic intensity, cleaning, and the risk of accidental contact. A wide model requires a more protected location.

White enamel RAL 9010 and beech: what this brings to the interior

Both consoles are presented in beech with white enamel RAL 9010. The opaque coating hides the natural wood grain and emphasizes the shape: curved legs, carved details, and the tabletop contour. Therefore, the choice between models is based not on different wood species or color, but on scale.

Combination with white doors

A white console can complement doors, architraves, and baseboards. But the same designation "white" does not guarantee a complete match of the shade. Compare RAL 9010 with the actual sample of the adjacent finish.

Combination with dark flooring

On dark parquet or tiles, light furniture looks graphic and lighter. Contrast emphasizes the legs, but dust and footprints on the floor will be more noticeable around the white piece.

Light wall

On a wall of a similar shade, the console appears softer, and the relief is read through shadows. To prevent the piece from blending in, add a dark mirror, bronze lamp, or colorful decor.

Colored or dark wall

White enamel creates a strong contrast. In this case, the wide 006-003 becomes especially noticeable. The compact model can work as a separate light accent.

How to decorate a tabletop without overloading the console

A console is often bought for a beautiful composition, but it is decor that can hide the shape of the furniture. Carved legs and a white Marseilles countertop already create a classic look. Additional items should support it, not compete for attention.

One main item

For 006-002, the best starting point is one expressive item. It could be a vase, lamp, sculpture, or decorative bowl. A small functional item nearby is acceptable: a key holder or a box. The smaller the tabletop, the more important the free space around the object.

Paired composition

The width of 1000 mm allows 006-003 to work with paired lamps or two identical vases. Symmetry supports the classic character. A low central item can be placed between the pair, but it should not block the mirror.

Asymmetry

A modern presentation is also possible for classic furniture. A tall lamp is placed on one edge, and a group of two low items on the other. The height and overall volume of the groups should balance each other. On 006-002, such a scheme requires particular restraint.

Functional decor in the hallway

A key bowl and a small tray are useful every day. But the console should not become a place for random items. If the family needs to store documents, gloves, and chargers, it is better to add a separate closed piece of furniture.

Seasonal decoration

A wide tabletop is convenient for seasonal compositions, but the size of items must be matched with the mirror and the passage. Tall branches near the door may catch on clothing. Candles and heat sources should not be placed dangerously close to wood and finishes.

How to combine the console with the RM-008 frame

RM-008 is an oval carved frame measuring 1246 × 791 mm with additional dimensional parameters of 51 × 57 × 25 mm. It is available in beech and oak with "Standard" and "Prestige" finish options, for enamel or tinting depending on the material and configuration. The frame is sold separately and does not automatically include a mirror panel, unless otherwise specified in the selected product card.

Combination with 006-003

The frame width of 1246 mm exceeds the width of the meter-long console by 246 mm. With central placement, the overhang will be approximately 123 mm on each side. This ratio may look natural if the wall is wide enough and there is free space around the frame. It is necessary to check whether the frame comes too close to the trim or sconces.

Combination with 006-002

The frame is more than twice as wide as the compact console. This composition is only possible as a deliberate design technique, where a small piece of furniture stands under a dominant mirror. On a narrow wall, this option is likely not suitable. For 006-002, a more compact or vertical mirror is usually more appropriate.

Distance to the countertop

The bottom edge of the frame should not touch objects on the console. If a tall lamp is planned, the gap is calculated taking it into account. First, mark the outline of the frame on the wall with painter's tape, then place mock-ups of decorative items.

Material and color

A beech frame for enamel can be coordinated with a white console. But the shade, gloss, and degree of patination should be checked against real samples. An oak frame for tinting will create contrast and emphasize the wood texture more strongly.

For a separate mirror zone, you can buy a carved frame RM-008 above the console, after checking the wall width, proportions, and configuration.

Ready-made console or under-table with a separate tabletop

Ready-made Marseilles and custom assembly solve different tasks. If the buyer is satisfied with a width of 470 or 1000 mm, depth of 470 mm, height of 930 mm, and white classic finish, ready-made furniture reduces the number of decisions. There is no need to separately coordinate legs, aprons, tabletop, and decorative elements.

When to choose ready-made Marseilles

A ready-made console is suitable when unified proportions, a finished design, and a clear size are important. The buyer checks the room, selects one of two models, and orders the finished item. The risk of mismatched individual parts is lower.

When custom assembly is needed

An individual project is appropriate if non-standard width, different depth, a specific tabletop, or special finish is required. In that case, you need to separately calculate the stability of narrow furniture, wall mounting, underframe, and surface material.

Why you cannot mix the two scenarios

Marseilles should not be purchased as a random base for another tabletop without checking the construction. The ready-made model is designed as a single piece. Any alteration of dimensions or finish requires coordination and may change the proportions.

If the standard 470 and 1000 mm are not suitable, you can once go to the material on how choose a base for a console table and assemble furniture according to an individual project.

What to buy together with the Marseilles console

Carved frame

The frame helps connect the furniture to the wall and creates the vertical part of the composition. Its size should match not only the console but also the entire wall. The mounting and mirror panel are checked separately.

Other classic furniture items

The console can work alongside a pouf, bench, table, or mirror of the same style. It is not necessary to buy the entire collection at once. It is enough to repeat the shape of the legs, white finish, or character of the carving in one or two adjacent items.

To find coordinated items, you can choose classic STAVROS furniture and compare sizes before creating a set.

Table lamp

The lamp adds functional light and emphasizes the vertical. For 006-002, choose a compact lamp that doesn't take up most of the tabletop. For 006-003, one large or two paired lamps are possible. The outlet should remain accessible.

Small storage

A tray, box, or bowl helps organize keys and small items. The item should have a soft base to avoid scratching the enamel. A large basket under the console can hide carved legs and disrupt proportions.

How not to confuse Marseilles with similar products

Console and dressing table

The 930 mm high console is primarily designed for standing use and decoration. A vanity table is usually designed for a seating area, mirror, and cosmetics storage. Marseilles can be used in a sleeping area, but seating comfort should be checked separately.

Console and writing desk

Depth 470 mm and height 930 mm are not designed as a standard permanent work surface. For a laptop for a short time, the tabletop can be useful, but regular work will require a different height and seating.

Console and chest of drawers

A chest of drawers provides closed storage and has a larger body. The console is visually lighter and leaves space between the legs. If the main task is to store things, Marseilles will not replace a chest of drawers.

006-002 and side table

The compact model with a width of 470 mm is similar in tabletop area to a small table, but the 930 mm height and classic design make it a wall console. It is not intended to be placed next to an armchair at armrest level.

006-003 and the dining table

A meter-long countertop may seem spacious, but a depth of 470 mm and a height of 930 mm do not match dining seating. The model serves as a decorative and auxiliary surface.

Practical choice for specific situations

Need to place furniture between two doors

First, measure the distance between the outer edges of the architraves and open both doors. If after placement there are free fields and passage, 006-002 is more suitable. 006-003 will require a wall significantly wider than a meter.

Need a console for keys at the entrance

A compact model is usually sufficient. Place a bowl and one decorative item on the countertop. Check that furniture does not interfere with the opening of the front door.

A composition with two lamps is needed.

Choose 006-003. On a 470 mm tabletop, two lamps will take up almost the entire surface and look cramped. For a wide model, mark sockets and wires in advance.

Need to fill a large empty wall

A meter-long console creates a stable horizontal line. Complement it with a mirror or frame, but keep empty spaces. Narrow 006-002 on such a wall requires a strong vertical element and may still look too small.

Need furniture for a small bedroom

006-002 is easier to integrate near a door or window. Use it as a decorative stand, not as a full dressing table. Check the passage between the bed and the tabletop.

An entrance group for a hotel or salon is needed.

006-003 creates a more noticeable zone but should be placed outside the main flow. Flowers, lamps, or branded materials can be placed on the tabletop. For a narrow corridor, choose 006-002.

Mistakes when choosing a console

Look only at the wall width

The wall can be quite long, but the passage too narrow. The depth of both models is 470 mm. In a small hallway, this parameter is often more important than the difference between 470 and 1000 mm in width.

Measure the space without architraves

If you measure the distance from the opening rather than from the outer edge of the architrave, the furniture may end up flush with the trim. This spoils the appearance and hinders door opening.

Choose 006-002 for a large wall without support

A compact console on a wide empty wall can look random. It needs a vertical frame, sconce, or composition of pictures. If a standalone furniture zone is required, 006-003 is often more proportionate.

Place 006-003 in a narrow passage

A meter length means a person passes next to the protruding countertop for a whole meter. The risk of hitting the furniture is higher than near a compact model.

Do not check the height of 930 mm

The console is noticeably higher than a regular dining or writing desk. This is convenient for standing use but not always suitable for sitting in front of a mirror or working with a laptop.

Buy a large mirror without markings

The frame may overlap the switch, be too close to the ceiling, or extend beyond the wall boundaries. Before ordering, the mirror contour must be transferred to the wall.

Overcrowding the countertop

In 006-002, several vases, frames, and candles hide the shape of the furniture. In 006-003, a long row of small items creates display clutter. It's better to leave empty spaces.

Consider white shades identical

RAL 9010 may differ from doors, walls, or other furniture in tone and gloss. If an exact match is important, compare real samples under room lighting.

Do not account for the baseboard

A high baseboard pushes the console away from the wall. The gap becomes noticeable, and the frame and tabletop are no longer in the same vertical plane.

Do not check the delivery route

A meter-long console may fit through a doorway but not turn around on a landing. Packaging and the possibility of partial disassembly should be clarified in advance.

Expect built-in storage

The Marseilles console is an open decorative piece. It does not replace a chest of drawers, a shoe cabinet, or a drawer unit. If you need to hide many items, separate furniture will be required.

Ignore cleaning

Curved legs and carved details require careful dusting. The console should not be wedged between a wall and a cabinet so that it is impossible to approach it from the side.

Who the Marseilles 006-002 is suitable for

The compact model suits the owner of a small hallway, bedroom, or hall with a complex layout. It is useful where you need to use a wall space but do not require a long surface. The console can serve as a place for keys, a single lamp, a vase, or a small decorative group.

The 006-002 is especially fitting between doors, near stairs, in a corner, or next to a narrow vertical mirror. It is chosen by buyers who like classic furniture but do not want to overload a small room with a meter-long piece.

Who the Marseilles 006-003 is for

The wide model is suitable for a free wall in the living room, spacious hallway, bedroom, or hall. It creates a full-fledged zone

When it's better to choose other furniture

Both models are not suitable if the passage is already narrow and 470 mm of depth makes it uncomfortable. For constant work, a desk is needed; for storage, a chest of drawers; for a seated cosmetic area, a dressing table of appropriate height.

If the wall needs a non-standard size between 470 and 1000 mm, you should not buy the model and modify it in a random way. It is more rational to consider an individual project. For a modern minimalist interior, a carved classic console may be too active.

What to check upon delivery

Packaging condition

Before unpacking, record any dents, punctures, and signs of moisture. Pay special attention to the corners of the tabletop and protruding parts of the legs.

Size and article number

Check the model: 006-002 has a width of 470 mm, 006-003 — 1000 mm. The depth and height are the same for both. It is easier to detect an error before bringing it into the room and removing protective materials.

White enamel

Inspect the surface under side and daylight. Check for any noticeable chips, scratches, and scuffs. Do not place decor until the inspection is complete.

Stability

Place the console on a level floor and make sure it does not wobble. First check the floor, then the supports. Random shims can change the vertical alignment and appearance.

Carved details

Inspect thin elements and leg transitions. Remove packaging carefully, without using a knife close to the painted surface.

Kitting

Check that the delivery matches the card and documents. The RM-008 frame, mirror, lamps, and decor are not included with the console automatically and must be ordered separately.

How to care for a white classic console

Regular dust removal

Use a soft dry or slightly damp cloth. In carved recesses, remove dust with a soft brush. A stiff brush may leave micro-scratches on the enamel.

Protecting the tabletop

Place soft transparent pads under a vase, lamp, or decorative bowl. Do not slide heavy objects across the surface; lift them instead.

Water and flowers

The vase should be stable and leak-proof. Wipe up spilled water immediately. Place a flowerpot on a saucer that does not leave colored marks.

Sunlight

Prolonged direct sunlight may unevenly affect finishes and items on the surface. If part of the tabletop is constantly covered by decor, periodically change the arrangement or monitor the surface condition.

Moving

Do not drag the console across the floor by the countertop. Lift the furniture while supporting the structure. Remove the mirror, lamps, and all items before moving.

Care in a commercial space

For a hotel or salon, a regulation is needed: what to wipe the enamel with, how often to check stability, and who is responsible for damage. Do not use aggressive all-purpose cleaners without testing.

How to prepare the composition before delivery

Draw the outline of the furniture

Use painter's tape to mark a width of 470 or 1000 mm on the wall, and a depth of 470 mm on the floor. The top of the countertop is at a height of 930 mm. The mockup shows the real scale better than a photo.

Mark the mirror

Add the outline of the future frame. Check the center, margins, and reflection. For RM-008, use the size 1246 × 791 mm as the basis for marking.

Mark the decor

Place boxes instead of lamps and vases. This will show whether the countertop is sufficient and whether overly tall items suit the mirror.

Check the lighting

If lamps are planned, ensure sockets are accessible and the cord does not cross the walkway. For sconces, pre-coordinate the outlets and distance to the frame.

How to buy Marseilles 006-002 and 006-003 on STAVROS

Start with precise measurements and choose a scenario. For a compact wall section, open card 006-002. For a free wall and large mirror, open card 006-003. Check size, material, color, custom order status, and current lead time.

If a frame is needed nearby, first do a general wall layout. Do not order RM-008 just because it is shown among related products. Its width of 1246 mm requires separate verification, especially above 006-002.

For a project with multiple items, compare classic furniture by size and style. It is better to coordinate one or two recurring features—white enamel, leg character, or carving shape—than to fill the room with many active items.

After checking, you can order Marseilles 006-002 in white enamel for a compact area or order Marseilles 006-003 for the wall under the mirror.

What to Check Before Ordering

• full width of the free wall;
• the distance between the trim;
• depth of the passage after furniture installation;
• the door opening trajectory;
• the location of outlets and switches;
• height and protrusion of the baseboard;
• size and shape of the future mirror;
• space for a lamp, vase, and other items;
• countertop height 930 mm;
• whether the console is suitable for standing rather than sitting use;
• the delivery route and the width of the doorway;
• material — beech;
• color — white enamel RAL 9010;
• current production lead time;
• whether the RM-008 frame or another mirror is needed;
• Is furniture with storage needed instead of a console?

How to evaluate the proportions of a console and a wall

The width of the furniture should not mechanically match the width of the mirror or take up exactly half the wall. In a classic composition, the balance of the center, free margins, and adjacent architectural elements is more important. Trim, sconces, baseboards, and doors also contribute to the perception.

Free margins on the sides

The console should maintain visual pauses. If 006-003 almost touches the corner and the casing, its meter-wide width looks forced. If 006-002 stands on a wall several meters long without support, it seems lost. The layout helps find a reasonable margin.

Center of the wall or center of the functional zone

The console does not always need to be placed in the center of the entire wall. In the hallway, the center of the wall between doors is more important. In the bedroom, the axis of the mirror or free zone. In the living room, the connection with the sofa, painting, or passage.

Height of adjacent furniture

The tabletop is at a height of 930 mm. Next to a low banquette, the console creates a vertical contrast. Near a tall cabinet, it may appear lighter. Do not place it flush against an object of almost the same height if there is no visual pause between them.

The role of baseboards and architraves

White enamel can tie furniture to a white baseboard, but the shapes should remain readable. Too active casings next to carved legs create an excess of details. In such a case, it is better to simplify the decor on the tabletop.

Ready-made schemes for model 006-002

Keys and vertical mirror

Place a small bowl closer to the front edge, and a narrow mirror above the console. One compact lamp can be placed on the side if the cord does not cross the passage. This scheme suits an entryway.

Lamp and painting

Only one lamp remains on the tabletop, with a painting above it or slightly to the side. Asymmetry makes a small console feel livelier, but the sizes of the items should be moderate.

Vase in a niche

One tall vase emphasizes the vertical. It should not obstruct the door or be unstable. A protective stand is placed under the vase.

Bedroom composition

A small lamp, a jewelry box, and a vertical frame suit a compact bedroom. The console remains a decorative surface, not a work desk.

Ready-made schemes for model 006-003

Two lamps and a mirror

Classic symmetry is built around the center. Space is left between the lamps for a vase or a low object. The mirror is placed strictly along the axis of the tabletop.

One large lamp and a decor group

A tall lamp occupies one edge, while two or three objects of different heights are placed on the other. The center can be left free. This scheme looks less formal.

A large vase and two small groups

The central vase becomes the main object, with small accessories remaining on the sides. It is important not to block the lower part of the mirror.

Commercial composition

In a hotel or salon, on a wide console, you can place flowers and two branded items. It is better to put promotional materials in a neat stand rather than spread them along the entire length.

How to choose a model based on wall width, not just furniture size

The width of the console alone does not indicate whether it will look appropriate. You need to consider the entire wall section from one architectural constraint to another. Trim, corners, windows, radiators, and tall cabinets create visual boundaries. The console should occupy a clear part of this section, not randomly sit between them.

Wall about 800–1000 mm

In such a section, 006-002 is more often considered. A width of 470 mm leaves noticeable margins on the sides. The model can be placed in the center of the wall section and supported by a vertical mirror. 006-003 here, as a rule, will not fit or will end up flush against the boundaries.

Wall about 1200–1500 mm

This is a transitional range. 006-002 will look spacious and require a large vertical element. 006-003 may fit, but you need to check the margins on the sides and adjacent trim. The choice depends on whether a local focal point or a full furniture zone is needed.

The wall is wider than 1600 mm

A meter-long console is often perceived as more proportionate. There is space left on the sides for sconces, tall vases, or just air. 006-002 can be used on such a wall if it is tied to a separate axis: a painting, a narrow mirror, or a pier between other objects.

Why you cannot place furniture flush against architraves

Even if the console physically fits, the lack of side clearance makes the composition feel cramped. Cleaning becomes more difficult, the door may touch the decor, and the legs visually blend with the architrave. A small free area helps the item read as separate.

How to choose a mirror by shape

Vertical mirror

The vertical shape is especially useful above 006-002. It stretches the composition upward and compensates for the small width. In the hallway, such a mirror helps to see the figure, and in the bedroom, it supports a narrow wall section.

Oval mirror

An oval softens the straight line of the tabletop and supports the curves of the legs. Above 006-003, it can be large; above 006-002, more compact. RM-008 is specifically an oval frame, but its size needs to be checked separately.

Horizontal mirror

A horizontal frame pairs more naturally with a meter-long console. It enhances the width of the composition and suits a free wall. Above 006-002, a wide mirror can visually outweigh the furniture.

Rectangular frame

A rectangle makes the composition stricter. In a classic interior, the shape can be softened with a carved baguette or paired lamps. The center of the frame should be aligned with the center of the console.

Mirror without symmetry

Intentional offset is possible if there is a tall lamp or painting on the other side. But asymmetry must be calculated. A randomly shifted mirror looks like an installation error.

How to check the console's convenience for the family

Morning exit scenario

Imagine several people putting on shoes, grabbing keys, and opening the door at the same time. The console should not be located where movements intersect. For a small hallway, this is an argument in favor of 006-002.

Bags and outerwear

A person in a coat takes up more space than in regular clothes. A bag may hit the edge of the tabletop or decor. A layout with a depth of 470 mm is tested specifically in seasonal clothing.

Children and pets

Tall vases, lamps, and fragile items must stand stably. If necessary, securing furniture to the wall is discussed separately. Do not assume that the weight of the console automatically prevents tipping.

Cleaning

A robot vacuum, mop, and manual cleaning require access between legs and near the wall. If furniture is wedged between other items, dust will accumulate in carved elements and behind the baseboard.

How to choose between a local accent and a full furniture zone

006-002 — local accent. It solves the problem of a small wall and does not require complex symmetry. It is easier to incorporate into an existing interior where the main items are already placed. One mirror and a lamp are enough.

006-003 — full zone. It affects the entire wall and requires thoughtful design above and on the sides. The mirror, lights, and decor must be chosen at the same scale. Such a console works better in a project where the wall is pre-planned for a composition.

When a local accent is more useful

In an apartment with a complex layout, multiple doors, or a small hallway, a compact model fills the empty space without rearranging the entire room. It is also suitable when a large wall is already occupied by a painting, wardrobe, or door portal.

When a full zone is needed

In a spacious hallway or living room, an empty wall may look unfinished. A meter-long console creates a horizontal line, a mirror creates a vertical line, and lamps add light. Together, they form an independent interior node.

How to coordinate a console with lighting

Table lamp

Check the base diameter and lampshade height. On 006-002, the lamp should not take up half the work surface. On 006-003, you can use a larger light fixture or a pair.

Sconces

Wall lights free up counter space but require pre-prepared wiring. Their center should align with the mirror. Sconces should not obstruct door opening or create glare in the reflection.

Overhead lighting

Overhead spot lighting emphasizes carved legs and white enamel, but can create harsh shadows. Check the composition in the evening when artificial lighting becomes primary.

Outlets

It's better to hide the desk lamp cord behind the console, but the baseboard and gap from the wall may interfere. The outlet should not be completely blocked by furniture if access is needed.

How to check the console against the real materials of the room

White enamel RAL 9010 is perceived differently next to a cool gray wall, a warm beige background, an oak floor, and dark stone. Before ordering, it is useful to hold a sample of a close white shade against the wall and look at it in the morning, afternoon, and evening. If the console should match the doors or baseboard, compare not the color name, but the actual tone and degree of gloss.

On a light floor, 006-002 looks particularly airy and may require a more noticeable mirror. On a dark floor, even a compact model becomes more graphic. The wide 006-003 on a contrasting background turns into the main object on the wall, so the decor should be made calmer.

Also consider the floor pattern. Diagonal laying, active marble, or large ornament already create movement. In such an interior, a symmetrical composition with a console helps calm the space. On a plain background, you can allow a more complex frame or an asymmetrical group of objects.

A photo of the room with the furniture outline applied helps assess the scale but does not replace full-size marking. For 006-003, it is especially important to see the entire meter-long line of the tabletop and the free margins on the sides.

Before making a final choice, it is useful to take two photos of the layout: one from the room entrance, the second from the main point of use. The first shows whether 006-003 overloads the wall; the second shows whether 006-002 gets lost. Such a simple test helps choose a model based on the actual perception of the room, not just the numbers on the card.

If both layouts seem suitable, compare not only the free wall but also the future function. For keys, one lamp, and a local accent, 006-002 is sufficient. For a large mirror, paired lamps, and an independent zone, 006-003 is more often needed. Function helps make a decision more accurately than the desire to fill the maximum available space.

Frequently asked questions

How does Marseilles 006-002 differ from 006-003?

The main difference is width. 006-002 has dimensions 470 × 470 × 930 mm, while 006-003 is 1000 × 470 × 930 mm. Depth, height, material, and white enamel are the same.

Which console to choose for a small hallway?

006-002 is often more suitable because it takes up 470 mm of wall space. But be sure to check the depth of 470 mm and the width of the passage after installation.

Will 006-002 fit in the space between doors?

Yes, if there is enough space between the outer edges of the architraves, the doors open freely, and there is visual clearance on the sides of the console.

Which model is better for a large mirror?

Usually 006-003. The meter-long countertop creates a more solid base for a large frame and allows for paired lamps.

Can RM-008 be hung above 006-003?

This composition can be considered. The frame has a width of 1246 mm and will be wider than the console by approximately 123 mm on each side when centered. The wall and mounting need to be checked.

Will RM-008 fit 006-002?

The frame is significantly wider than the compact console. This combination is only possible as a deliberate design choice on a sufficiently wide wall. For a narrow space, a smaller mirror is usually more suitable.

What is the depth of both consoles?

470 mm. This size is especially important for hallways and narrow corridors because the furniture noticeably protrudes from the wall.

Is the height of 930 mm convenient?

It is convenient for a standing decorative surface, keys, and a lamp. For regular work while sitting or using it as a standard vanity table, the height should be checked separately.

Can the Marseilles be used as a desk?

For regular work, the model is usually not suitable due to its height of 930 mm and depth of 470 mm. It's better to choose a specialized desk.

What material are the consoles made of?

In the current product cards, both models are presented in beech.

What color is Marseilles?

White enamel RAL 9010. Before ordering, compare the shade with doors, walls, and other furniture using a real sample if an exact match is important.

Does the console have drawers?

The product cards describe ready-made consoles and do not confirm built-in closed storage. Do not expect to use them as a chest of drawers or cabinet.

What to place on 006-002?

One main item — a small lamp, vase, or sculpture — and a compact bowl for keys. A large number of small accessories will overload the tabletop.

How to style 006-003 symmetrically?

Place two identical lamps or vases on the edges, and one lower object in the center. Keep free space and do not block the mirror.

Do I need to attach the console to the wall?

The exact need and method of fixation depend on the design, floor, operating conditions, and project. For a home with children or a commercial space, the stability issue should be separately agreed upon.

Can the console be placed on a carpet?

Only after checking stability. Thick soft pile can cause wobbling. The legs must be on the same plane.

How to know if 006-003 will not obstruct the passage?

Mark a rectangle of 1000 × 470 mm on the floor and walk around it. Open doors, cabinets, and check movement in outerwear.

Which mirror to choose for 006-002?

A compact vertical, oval, or narrow mirror is often more suitable. Its width should match the wall space, not just the furniture.

Does the mirror need to be narrower than the console?

There is no strict rule. The mirror can be narrower or wider if the proportions look intentional and there are free margins on the wall.

Is it possible to place two lamps on 006-002?

Technically possible with very compact fixtures, but the tabletop will quickly become cramped. For a paired composition, 006-003 is better suited.

What to choose for a large living room?

On a free wall, 006-003 is often more proportionate. A compact model is chosen for a separate wall space or supported by large vertical decor.

Is a white console suitable for a dark floor?

Yes. The contrast emphasizes the shape of the legs and makes the furniture more noticeable. Consider the baseboard and the shade of other white elements.

How to care for white enamel?

Wipe with a soft cloth, do not use abrasives or strong solvents. Place soft pads under decor and remove water immediately.

Are consoles made to order?

Yes, the current cards indicate the status "on order" and an average production time of 5–10 days. The actual time is checked before placing an order.

Where to buy Marseilles 006-002 and 006-003?

Both models are presented in the STAVROS catalog with separate cards, a cart, and one-click purchase. Before ordering, select the size based on the actual wall and passage.

Result: 470 mm for a narrow wall section, 1000 mm for a full wall

Marseilles 006-002 and 006-003 are made in the same classic style, from beech, in white enamel RAL 9010. Their depth of 470 mm and height of 930 mm match, so the buyer primarily chooses the scale. The compact model helps utilize a small partition. The wide one creates an independent zone for a large mirror and symmetrical decor.

Before purchasing, measure not only the wall but also the passage, trim, baseboard, outlets, doors, and the delivery route. Make a mock-up of the tabletop on the floor and the mirror outline on the wall. Such a test helps avoid a situation where beautiful furniture formally fits but daily hinders movement.

STAVROS offers both ready-made models with clear sizes and individual cards. After inspecting the room, you can buy a console for a small niche Marseilles 006-002 or buy a classic console for the living room Marseilles 006-003, without assembling the item from random under-tables and tabletops.