Curtains close every evening: how to buy two carved wooden shelves PKR-012.1 on either side of the window

A beautiful pier may remain on each side of the window, and in the sketch two carved shelves look like an almost obvious solution. The problem appears in the evening: full-size curtains move from the center of the window to the slopes, gather in folds, and occupy the volume that seemed free in the static plan. Therefore, it is reasonable to order a pair of PKR-012.1 not after measuring one wall width, but after checking the actual movement of the fabric and the shelf's projection into the room.

For such a project, a simple order is needed: first measure both piers separately, then record the actual zone of the gathered curtain, make a volumetric mock-up of the shelf 325 × 150 mm, check it with the fabric open and closing, open the window, and simulate curtain rod maintenance. Only after this can you fix the two coordinates and place the order for the pair. Two identical shelves do not mean that the left and right window units are automatically identical.

According to the STAVROS card, PKR-012.1 has a full size of 272 × 325 × 150 × 79 × 100 mm, is produced in beech and oak with "Prestige" sanding quality. For the selected beech version, the "Under enamel" preparation is specified. The price as of September 7, 2026, is 16,420 ₽ for beech and 19,510 ₽ for oak. This means two separate shelves cost 32,840 ₽ or 39,020 ₽, respectively — before finishing, fasteners, installation, and delivery.

Carved Shelf PKR-012.1

from 198.19 $

Go to Catalog

Carved wooden shelf PKR-012.1: which dimensions matter near a window

For a window pier, the main values are not just "does the product fit in width." In the working project diagram, the 325 mm size is used as the shelf width along the wall, and 150 mm as its projection into the room. It is this projection that turns flat layout into a spatial task: the curtain moves not along the wall, but next to it.

Other numerical designations from the full size should not be independently converted into mounting offsets, fastener platform dimensions, or usable top surface area. This requires a readable drawing and a specific mounting point. The listing sells a carved shelf, not a ready-made "shelf + wall-mounting hardware" kit.

If the dimensions and appearance are suitable, buy a carved shelf PKR-012.1 it is better after a spatial check at the actual window. The article number, material, and quantity can be fixed in advance, but the mounting coordinates only after a mock-up.

Watch video ...

Wooden wall shelf and curtain: measuring the fabric working envelope

A curtain has no single constant size near the slope. The fabric can be almost flat when closed and gather into a thick fold packet when open. Additionally, the fabric is pushed by hand, moves with air currents, is removed from the rod, and returns to place. Therefore, it is convenient to introduce the working concept of a "curtain envelope" — the area the fabric actually occupies in all normal actions.

This is not a building standard or a universal gap. The envelope is determined at a specific window. It is easier to obtain not by formula but by observation and measurement. Fully open the curtain to its usual daytime position, without pulling the folds tighter than normal. Mark the farthest point of the fabric packet from the slope. Then close and open the fabric several times, observing whether the edge sweeps a larger arc. If the curtain is held back with a decorative tieback, repeat the measurement with and without it.

Separately, check what happens when the sash is opened. On one window, the handle and sash move away from the shelf; on another, they move right toward it. You cannot draw conclusions from a single frontal photo.

It is useful to create a small map for the left and right sides:

After such a table, it becomes clear that "two identical piers" often differ in operation.

Our factory also produces:

Exhibition stand SV-005

from 252.38 $

Exhibition stand SV-004

from 246.83 $

Wooden rose R-046

from 16.42 $

Wooden Molding K-012

from 18.95 $

Flat wooden baluster L-092.1

from 312.01 $

Wooden Baluster L-067

from 120.46 $

Furniture handle Rustic HL-057M

from 62.16 $

Crown molding with decorative frieze KZ-014

from 172.96 $

View Full Product Catalog

Two carved shelves on the sides of the window: is there enough space on the piers

Let's consider a conditional example. This is not a recommendation for mandatory indents, but a way to check your own dimensions.

Suppose one side pier has a width of 720 mm. In the fully assembled position, the curtain actually occupies 260 mm. The PKR-012.1 shelf requires 325 mm along the wall.

720 − 260 − 325 = 135 mm.

135 mm remains. But this figure does not yet say "the shelf fits." These 135 mm must be distributed between the actual fabric zone, the shelf position, and the adjacent boundary. If there is a cabinet, door trim, or wall protrusion to the right of the shelf, the remainder may be insufficient. If the curtain in motion extends beyond its 260 mm, the static calculation also becomes false.

The same calculation is performed separately on the right. For example, with a wall segment of 680 mm and the same fabric package of 260 mm:

680 − 260 − 325 = 95 mm.

The difference between the sides is already 40 mm. If you simply set the same distance from the slopes, one shelf may turn out to be convenient, while the second may be too close to the fabric or an adjacent object. Therefore, a paired order starts with two lines of measurements, not with an assumption of mirror symmetry.

For preliminary selection of similar dimensions, you can buy a wooden wall shelf from the general selection, but the final check must still be performed on the specific wall segment.

Depth 150 mm: why painter's tape markings are insufficient

Painter's tape answers well the question of how the shelf looks on the wall. It says almost nothing about contact with the curtain, because it does not show the 150 mm protrusion.

Make a temporary three-dimensional mock-up. For the check, there is no need to imitate threading. A rectangular volume 325 mm wide and 150 mm deep made of cardboard, foam board, or a light box is sufficient. Attach it at the intended point so that it does not damage the wall finish, and live with the mock-up for at least one full window cycle.

Check not only the contact of the fabric with the front edge. A carved shelf has a developed silhouette, so the fabric may lie on the side or bottom part, catch on a fold, or wrap around the shelf so that the curtain stops hanging naturally. The mock-up does not reproduce the carving, so a small clearance in the mock-up is not automatic proof of the absence of contact with the real product.

The hand test is especially telling: run the curtain along its usual trajectory several times. If the fabric constantly has to be pulled away from the mock-up with the other hand, then after installation the shelf will become a daily obstacle. Buying beautiful decor with the expectation of constantly "carefully avoiding it with the curtain" is a weak operational solution.

The curtain opens, closes, and is removed: three mandatory positions

Checking only a fully open curtain is insufficient. The same window has at least three modes, and each may have its own conflict.

The curtain is gathered at the slope

In this state, the fabric occupies the maximum lateral volume. You need to see whether free access to the shelf is maintained and whether folds fall on its front part. If a tieback is used, check the usual position, not a specially tightened narrow bundle for the sake of a favorable measurement.

The curtain moves

When closing, the fabric may move away from the wall more than in the final position. Go the entire path from the extreme point to the center of the window. If the panel touches the mock-up once per cycle, that is already contact that will repeat every evening.

The curtain and window are serviced

Imagine not only an ordinary day but also rare operations: removing the curtain, reaching the runners or rings, wiping the windowsill, opening the sash fully, cleaning the shelf itself. If each such action requires dismantling PKR-012.1, the placement should be reconsidered before purchase.

For general principles of working with decorative wooden elements, the following will be useful tips for installing wooden products, but the specific fasteners to your wall and the safe position of the shelf should be determined based on the actual base and the project.

Symmetrical shelves near a window: identical coordinates or visual balance

The phrase "two identical shelves on either side of a window" is often perceived as a requirement to place them mirror-symmetrically. This is one option, but not the only one.

If both wall sections are truly identical, the curtains are gathered the same way, and there are no doors or furniture nearby, geometric symmetry looks logical. Then you can set the same height, the same distance from the slopes, and the same axes.

But in a real room, there may be a cabinet on the left, a passage on the right, one wall section may be wider, and the fabric stack may be thicker due to the direction of opening. In such a case, identical coordinates relative to the slopes can visually and functionally worsen the composition.

Create two versions of the layout: strictly symmetrical and visually balanced. For each shelf, record:

• the height of the top surface;
• the axis relative to the window;
• distance to the slope;
• the actual distance to the curtain hem;
• the distance to the nearest furniture, door, or corner.

You need to compare the overall look of the wall from the point where the room is most often viewed, not just distances measured with a tape measure. At the same time, a compromise for the sake of composition should not return the shelf to the path of the fabric.

What to place on PKR-012.1 next to curtains

The PKR-012.1 card does not give grounds to independently assign an allowable load or promise that a specific wall will support a heavy object. Therefore, the choice of contents is best made after deciding on the mounting assembly.

For a light decorative object, stability, the size of the top surface, and the likelihood of accidental contact with the curtain are still checked. A tall object that the fabric may catch when closing is bad even if it has a small mass. A heavy vase, books, or another massive object cannot be planned just because the shelf visually seems sturdy: first, determine the wall material, fasteners, and the design scheme.

Therefore, in the task for the installer, the question is not "which dowel to take," but "what is the wall base, what is the actual mounting assembly of PKR-012.1, and what usage is planned." Specific fasteners are chosen after this data.

Beech or oak: coordinating the wood with the curtains, not choosing the species in isolation from the room

For a pair near the window, the overall color rhythm is especially noticeable: two identical details are simultaneously next to the fabric, wall, cornice, and daylight. Choosing beech or oak only from a product photo is risky.

Compare the finish sample next to the curtains in the morning and evening. Dense fabric under artificial lighting can be perceived noticeably differently than during the day. If there is wooden furniture nearby, it is useful to place samples next to it, but do not require a literal texture match: natural wood has its own pattern.

"Prestige" at STAVROS refers to the quality of surface treatment and includes more detailed sanding. "Under enamel" describes the preparation of the workpiece for opaque finishing, not a finished white paint job. If you want a different type of finish, you need to separately agree on the appropriate workpiece quality and technology. Details of the differences can be found in the section choose the wood and preparation for finishing.

For a paired installation, it is reasonable to coordinate both shelves as one visual set: one material, one finishing scheme, the same gloss, and one approved color task.

How much does it cost to buy two PKR-012.1

The price of a pair is calculated simply, but it can easily be mistaken for the cost of a ready-made solution.

The difference between the two options for a pair is 6,180 RUB. This is only the price of two items at the time of checking. Finishing, agreed fasteners, wall preparation if necessary, installation, packaging, and delivery remain as separate line items.

Two shelves should not be called a manufacturer's "paired set." In the project under consideration, two separate PKR-012.1 units of the same specification are purchased. If it turns out before payment that a different dimension is needed on the right, it is better to abandon the formal pair than to order a second piece just for symmetry.

When placing an order, check in advance payment and delivery terms for the carved shelf and separately clarify the composition of the specific account. The price of the goods and the cost of the completed installation are different amounts.

How to order two carved shelves PKR-012.1 on the sides of the window

After the mockup, the order can be translated from the words "two beautiful shelves" into a precise specification. For a conditional beech variant, the line looks like this:

PKR-012.1 / 272 × 325 × 150 × 79 × 100 mm / beech / "Prestige" / agreed preparation / 2 pcs.

The seller needs product parameters and quantity. The installer needs another part of the information: a photo of the wall, dimensions of the left and right pilasters, the position of the window and cornice, the working envelope of the curtain, coordinates P1 and P2, wall material, and the agreed finish. Do not mix these two specifications into one phrase.

Before irreversible installation, it is useful to re-apply the obtained shelf to the place and compare it with the mockup. The mockup checks the overall dimension but does not show the real carved silhouette and the mounting part. If the position has to be adjusted, it is cheaper to do this before drilling and final finishing.

For a general comparison of decorative solutions, you can view the material compare carved wall shelves for different interior zones. It helps to choose the class of the product, but does not replace dynamic verification near your curtains.

After the left and right positions are confirmed, you can select two PKR-012.1 and approve the order in one specification.

When PKR-012.1 is near a window, it's better not to buy it

Refusing the purchase is a normal result of the check. The shelf doesn't have to fit just because there's a free wall between the window and the corner.

You shouldn't order PKR-012.1 for the chosen spot if the fabric package takes up almost the entire wall section and leaves no calm zone for a product 325 mm wide. The same applies when the 150 mm projection falls into the path of a closing curtain, interferes with fully opening the sash, or forces you to move the fabric aside by hand every time.

It's also better to postpone the purchase if the wall material is unknown and safe installation hasn't been approved. A beautiful facade sketch doesn't answer the question about mounting. If the shelf is planned to hold a heavy item and the permissible scheme isn't confirmed, first resolve the structural part.

Another reason to change your mind is the inability to service the window and curtains. When removing the textile or accessing the cornice requires dismantling the carved decor, the daily composition starts to conflict with operation.

In such cases, it's better to return to the catalog and buy a decorative wall shelf choose a different size or abandon the paired scheme. This is more rational than adjusting curtains and the window to already paid decor.

Mistakes that cause a pair of shelves to start interfering with the window

The first mistake is to measure only one pier and transfer its dimensions to the second. Even with a symmetrical window, the real environment differs: on the left there may be the edge of a cabinet, on the right a door trim, one curtain package may gather tighter than the other. The consequence is simple: two identical PKR-012.1 units are purchased, but one position requires shifting after delivery. Prevention — two independent measurement lines and two separate coordinates P1/P2.

The second mistake is to check the curtains only in a beautiful final position. Closed fabric may not touch the future shelf, but during movement it may move away from the wall by several centimeters more. If contact occurs precisely in the transitional phase, it will repeat every evening. Therefore, the test is performed not from a photo, but with several full open-close cycles using a volumetric mock-up.

The third mistake is to use only painter's tape on the wall. It helps to choose the height and width of the composition, but completely hides the main parameter of the scenario under consideration — the 150 mm protrusion. As a result, the shelf "fits" on the plane, but after installation the fabric begins to lie on the front part. The fix is to add a volumetric mock-up to the flat marking and separately run the fabric over it.

The fourth mistake is to assume that the shelf should stand as close as possible to the slope for symmetry. This design decision may conflict with the working envelope of the curtain. First, determine the area where decor should not fall, and only within the remaining zone look for a beautiful coordinate.

The fifth mistake is to buy universal fasteners in advance. The PKR-012.1 card does not turn brick, concrete, solid wall, hollow block, and framed partition into the same base. Incorrect fasteners are no longer an aesthetic defect, but a safety issue. The mounting scheme is chosen based on the wall material, the actual shelf construction, and the intended use.

The sixth mistake is to consider the price of two products as the final estimate. For beech 32,840 ₽ and for oak 39,020 ₽ — this is the cost of the pair of shelves themselves. If finishing, delivery, base preparation, and installation are not separated into individual lines, the project budget will be artificially underestimated even before placing the order.

Questions before purchasing shelves for a window with curtains

Should 325 mm be considered the minimum width of a free pier?

No. 325 mm is the size of the shelf itself along the wall in the working scheme, not the minimum pier width. The pier must simultaneously account for the curtain, adjacent obstacles, and the chosen composition.

Can I simply leave a fixed 50 mm between the curtain and the shelf?

A universal number for all curtains would be a fiction. Fabric thickness, fold type, curtain rod, tieback, and movement trajectory all vary. An actual envelope of a specific curtain is needed.

If the curtain does not touch the cardboard mock-up, is the check complete?

No. The mock-up shows the main volume of 325 × 150 mm, but it does not reproduce the carved silhouette of the actual PKR-012.1. After receiving the product, a trial fitting is needed before final installation.

Do I need to buy both shelves from the same wood species?

For a visually paired composition, it is logical to fix the same material and finish. But the natural wood grain will still not become absolutely identical on two separate items.

Does white painting fall under the designation "Under enamel"?

No. "Under enamel" refers to preparing the blank for an opaque finish. The final coating itself and its cost need to be agreed upon separately.

Can PKR-012.1 be mounted on a drywall partition?

This cannot be confirmed from a single product card. First, the partition structure, presence of embedded elements, actual mounting point, and planned shelf usage are determined.

What to do if PKR-012.1 fits on the left, but not on the right?

There is no need to forcibly keep the pair. You can choose a different size for the entire composition, change the arrangement, or abandon the second shelf. Symmetry is not more important than the normal operation of the curtains and window.

Do I need to account for the windowsill if the shelves are above it?

Yes, if the windowsill affects the movement of a person, the curtains, or the opening of the sash. The entire spatial unit is checked, not just the horizontal line at shelf height.

Can the curtain lightly touch the carving without consequences?

Constant contact should be considered a conflict until proven otherwise. The fabric can catch on a developed relief, change position, or wear out. Designing daily contact as the norm is not advisable.

When should the curtain package be measured—immediately after hanging or after a few days?

It is more practical to measure in the normal operating state, when the fabric is already hanging as it will be used daily. If the curtains are not yet installed, it is better not to invent an exact envelope based on a photo of the fabric sample.

Do two shelves need to be placed at exactly the same height?

If the composition is intended as a pair, one height usually serves as the starting point. But the final position is checked relative to neighboring furniture, doors, the cornice, and the actual window. Formal symmetry may yield to visual balance.

What should be checked on installation day before drilling?

Match the actual shelf with the markings, open and close the curtain, fully open the sash, check access to the cornice, and confirm the mounting assembly for the wall material. Only then proceed to irreversible operations.