Buy headboard and footboard for bed separately or choose a ready-made frame KRVT-001 — which is more profitable

Three purchase routes for a double bed: separate back headboard, separate footboard, or full carved frame

Bed Headboard KRVT-001-1

from 1,697.74 $

Bed End KRVTC-001-2

from 876.86 $

Carved Bed Frame KRVT-001

from 5,046.85 $

Go to Catalog

What to choose: a separate backrest or ready-made KRVT-001

Short answer: If you already have compatible side rails and a base, you can separately buy the headboard KRVT-001-1 or footboard KRVTC-001-2. For a new bed, it is better to order the full carved frame KRVT-001: it includes both backrests, two side rails, pine bars 40 × 40 mm for the mattress support frame, wooden dowels, eight reinforced Spiral Lock ties, and fasteners. The mattress support frame and mattress must be selected separately.

Buy headboard KRVT-001-1 Buy footboard KRVTC-001-2 Buy full frame KRVT-001

Headboard only. Suitable for replacing the backrest, updating an existing bed, or a custom project with already calculated side rails.

Footboard only. Purchased for replacing the front panel or assembling a custom set from the same series.

Full KRVT-001. More rational when building a bed from scratch and a consistent geometry of all main parts is needed.

Three sizes. The set is designed for mattresses 1600 × 2000, 1800 × 2000, and 2000 × 2000 mm.

Beech or oak. Beech is chosen for opaque enamel, oak for transparent or semi-transparent tinting.

The mattress and bed base frame are not included. They need to be added to the final order separately, based on the selected size.

A buyer who wants to purchase a bed frame or replace only one wooden headboard faces not a choice between "more expensive" and "cheaper," but a compatibility issue. A separate headboard can be more advantageous if the existing bed is functional and the craftsman already knows how to connect the new part to the side rails. The full KRVT-001 is more advantageous when the structure is built from scratch: the main elements already belong to the same series, match in size, and are designed for a common set of connections.

The main mistake is ordering a full frame and separate headboard and footboard simultaneously without a special reason. The ready-made KRVT-001 already includes both headboards. Additional items are needed not as a mandatory addition, but as independent routes: replacement of a damaged part, a custom furniture project, or a spare element for a specific task.

The tall carved headboard KRVT-001-1 sets the character of the bedroom and noticeably extends beyond the mattress width. The low KRVTC-001-2 completes the bed at the foot end but has different dimensions and depth. The finished frame connects both headboards with two side rails and includes a fastening system. Therefore, comparing only the price of the items is insufficient: you need to compare the entire cart composition, design scope, finish, assembly, and the risk of incompatibility.

To replace the back headboard, you can purchase the wooden headboard KRVT-001-1. For the front part — buy the footboard of the KRVTC-001-2 bedIf the bed is assembled completely, it's easier to immediately buy the carved bed frame KRVT-001 and separately select a mattress and a bed base frame.

Watch video ...

Three different products — three different order compositions

The headboard, footboard, and full frame externally belong to the same series, but are not interchangeable items. The headboard is the rear high part. The footboard is the front low panel. The frame is a set that, in addition to both panels, includes side rails and connecting hardware. The buyer must first determine which part of the structure they already have, and then choose the product card.

Our factory also produces:

Wooden Rose R-012

from 6.34 $

Wooden rose R-046

from 16.59 $

Wooden Molding K-049

from 4.27 $

Versailles Bed 001-001

from 7,290 $

View Full Product Catalog

Separate headboard KRVT-001-1

KRVT-001-1 is a tall carved panel made of beech or oak. It is available in three mattress sizes and is supplied disassembled: the carved part and two plywood inserts. The plywood inserts allow for further finishing or upholstery, but specific upholstery materials, padding, and technology are not included in the confirmed article configuration.

Purchasing a separate panel makes sense when the existing frame can be adapted and the craftsman confirms the attachment points. The headboard widths are 1864, 2064, and 2264 mm, so they are significantly wider than the corresponding mattresses. This size cannot be ignored when placing near nightstands, outlets, sconces, and wall panels.

Separate footboard KRVTC-001-2

The front backrest has a height of 423 mm and a depth of 125 mm. Its width depends on the size: 1775, 1975, or 2175 mm. The footboard is lower than the headboard and has a different design, so you cannot select it just by the phrase "for a 1800 bed." You need to check the overall dimensions, side rail height, mounting zones, and the entire series.

Full frame KRVT-001

The ready-made set combines a carved headboard, footboard, and two side rails. It also includes pine bars 40 × 40 mm for the slatted base, wooden dowels, eight reinforced Spiral Lock ties, and fasteners. This reduces the need to search for connecting parts separately and helps assemble the base from compatible components.

However, the full frame is not a completely ready-to-sleep bed. It does not include the slatted base and mattress. The manufacturer recommends a mattress thickness of at least 200 mm. The slatted system is selected separately based on size and design, and its compatibility with the bars and side rails should be checked before assembly.

Confirmed specifications of three options

The main takeaway from the table: a separate headboard saves on purchase only when the other parts are already available and compatible. If, together with the headboard, you have to redesign the side rails, find the footboard, calculate connections and select fittings, a full set may be more rational not in terms of the price of one item, but in terms of the amount of work and the risk of rework.

What is more profitable: a separate part or a full frame

The word "more profitable" in this topic cannot be reduced to just one price. A separate headboard has a smaller delivery set, but more requirements for the existing structure. A full frame has a wider set, but the buyer does not need to separately look for side rails, a footboard and a connection system. The real benefit consists of the cost of goods, design, processing, assembly and the likelihood of rework.

When a separate backrest truly saves money

Savings occur if you don't need to repurchase and redo everything else. For example, the side rails are sturdy, the mattress and base fit, the connections are accessible for modernization, and the master confirmed compatibility. Then the buyer only replaces the visually or physically damaged part.

If, along with the backrest, you have to order new side rails, fabricate transition plates, relocate fasteners, and change the slatted base system, the initially smaller basket can turn into a more complex project. Before purchasing a separate part, you need to get a calculation of all associated work.

When a full frame is more advantageous in terms of risk

KRVT-001 reduces the risk of accidental mismatch of main elements. The headboard, footboard, and side rails belong to the same model. The kit includes reinforced ties, dowels, and fasteners. The buyer still has to select the slatted base frame, mattress, and finish, but they are not designing the support box from disparate parts.

When price is not the main criterion

For a carved bed, proportions are important. A headboard 2264 mm wide, random narrow side rails, and a front panel with a different pattern can create a physically functional but visually inconsistent piece of furniture. If the bed becomes the central item in the bedroom, a unified series and consistent finishing are sometimes more important than the minimum cost of each component.

What is included in the finished frame KRVT-001

The complete KRVT-001 is not just the headboard and footboard. It includes the main wooden parts that form the perimeter of the bed and connect into a single structure. Knowing the configuration allows you to correctly compare it with individual items and avoid buying the same elements twice.

Carved headboard

The high back panel forms the main decorative center. Depending on the size, its height is 1508 or 1553 mm, and its width ranges from 1864 to 2264 mm. It is designed for the corresponding set and affects the overall width of the bed more than the mattress.

Low footboard

The front panel, 423 mm high, completes the bed at the foot end. It does not match the headboard in width and depth, so it cannot be replaced with a random panel of the same mattress size. In the finished set, the proportions are already coordinated with the side rails and the back part.

Two side rails

The side rails connect the headboard and footboard and form the side boundaries of the mattress space. Their absence is most often what makes buying just a headboard a complex project. For a separate headboard, the buyer will need to have ready compatible side rails or order them from a furniture workshop.

Pine bars 40 × 40 mm

The bars serve as support for the mattress frame. They are part of the frame, but the frame itself is not included. This distinction must be understood before ordering: the presence of support bars does not mean that the mattress can be placed directly on them without a separate base.

Wooden dowels

The dowels are part of the component connection system. Their presence reduces the need to independently select hardware, but assembly still requires careful marking, correct sequence, and geometry checking.

Eight reinforced Spiral Lock ties

The ties help connect the main parts of the frame. The buyer does not need to search for random furniture connectors for each point. However, the presence of fasteners does not eliminate the need for professional assembly, especially if the wood is already finished and any mistakes could damage the surface.

Fastening

The kit includes fasteners specified in the card. Do not purchase additional hardware in advance without a project: some elements may be unnecessary or incompatible. Additional solutions are only needed for the mattress frame, upholstery, finishing, or specific assembly conditions.

What is not included in the kit

The mattress and mattress frame are purchased separately. Also, do not expect finished upholstery of the headboard plywood inserts if it has not been selected and confirmed by a separate card. Finishing materials and assembly services are also not automatically included. The complete frame is the base of the bed, not a fully equipped sleeping area.

After checking the composition, you can buy a wooden bed frame of the required size, without adding individual KRVT-001-1 and KRVTC-001-2 again.

When you can buy only the headboard KRVT-001-1

A separate wooden headboard for a bed is chosen not because it universally fits any base, but because the buyer already has a clear project. The more complex the carved back, the more carefully you need to check the fastenings, width, and height. Otherwise, the purchase turns into making a new bed around a single part.

Replacing a damaged backrest

If the bed belongs to a compatible series, the side rails and footboard are in good condition, a separate backrest helps restore the furniture without a full replacement. Before ordering, compare the article number, mattress size, overall width, height of connection points, and material.

On an old bed, the fastenings may have been altered, so matching the model name alone is not enough. A craftsman must inspect the joints and confirm that the new part will fit without dangerous modification of the load-bearing components.

Updating an existing bed

A tall carved headboard changes the perception of the bedroom more than new fabric or decor. It covers a significant part of the wall and sets the height of the entire composition. This option is suitable if the bed structure is sound but the current backrest looks too simple.

The buyer needs to check outlets, switches, sconces, and nightstands in advance. The headboard is 264 mm wider than the mattress in all three sizes. This means approximately 132 mm of additional overhang on each side with symmetrical installation. Adjacent elements should not fall within the carved contour or interfere with installation.

Author's furniture project

The workshop can use KRVT-001-1 as a ready-made decorative center and independently develop side rails, footboard, base, and connections. This approach is suitable for a professional project where materials, loads, and assembly technology are known. For home improvisation without a drawing, it is too risky.

High headboard as a standalone accent

If a footboard is not needed stylistically and the bed is built on a low base, a separate headboard can create a more open silhouette. But this is no longer a ready-made KRVT-001, but a new furniture structure. It is necessary to calculate the rigidity and attachment of the headboard so that it does not wobble or transfer load to random points.

What to check in the product card and on site

Check the standard size, overall width, height, depth of 64 mm, material, sanding, and configuration. Then compare the connection points with existing side rails. If there is no exact data, it is better not to buy a headboard 'with a width margin': a decorative element cannot be safely adjusted like a regular board.

For a point replacement, you can buy a carved bed headboard, and to compare other forms, open the category and buy a headboard for the bed after checking the dimensions.

How to choose the size of a separate headboard

The size name indicates the width of the mattress, not the actual width of the carved backrest. This is a fundamental difference. A buyer planning a bed for a 1800 × 2000 mm mattress receives a headboard with a width of 2064 mm. If only the mattress is measured, the backrest may cover a socket, part of a decorative panel, or the space for a nightstand.

For a 1600 × 2000 mm mattress

The headboard size is 1864 × 1508 × 64 mm. The total width is 264 mm wider than the mattress width. In the room, space must be left not only for the bed but also for the extension of the carved contour. With symmetrical installation, the guide is approximately 132 mm on each side, although the actual composition depends on the side rails and installation.

For a 1800 × 2000 mm mattress

The headboard measures 2064 × 1553 × 64 mm. It is 45 mm taller and 200 mm wider than the version for a 1600 mm mattress. For a bedroom with two nightstands, the entire wall should be drawn in advance: bed, backrest, furniture, sconces, sockets, and walkways.

For a 2000 × 2000 mm mattress

The size is 2264 × 1553 × 64 mm. Such a backrest requires a spacious wall and sufficient distance to doors, a wardrobe, or a window slope. A two-meter wide mattress already takes up significant space, and the carved element extends the composition by another 264 mm.

Why height is as important as width

The height of 1508–1553 mm determines the position of the decor relative to the wall. Low-mounted sconces, paintings, moldings, and rosettes may end up behind the headboard. If the ceiling is low, a large headboard will be particularly noticeable. It should be planned before the final electrical wiring and wall decor are installed.

How to check the size with a mockup

Mark the width and height with painter's tape on the wall. Place nightstands nearby and check if access to outlets remains. Then step back to the bedroom door and evaluate the proportion. Such a mockup does not replace a mounting drawing, but it helps to understand the scale before purchase.

Informational material on choosing a headboard

If the buyer is still unsure about the height, shape, and role of the carved element, it is useful to study the material on how to choose a separate wooden headboard. After that, you need to return to the KRVT-001-1 card and check the specific dimensions.

Plywood inserts of the headboard: what disassembled delivery means

KRVT-001-1 is not supplied as a fully finished upholstered headboard. The set includes a carved part and two plywood inserts. The buyer must decide in advance how these areas will be finished: whether they will remain in wood trim, be painted, or become the base for upholstery. There are no confirmed fabrics or fillers in the SEO scheme, so they are selected separately.

Why the inserts are separated from the carved part

Separate configuration simplifies finishing and allows working with surfaces individually. The carved wooden part can be prepared for enamel or tinting, while the plywood inserts can be designed according to the project. This offers flexibility, but also additional work that needs to be accounted for in timelines and budget.

If upholstery is needed

You will need fabric, padding, lining materials, and a fastening technique. The thickness of the soft layer should not interfere with the installation of inserts or cover the decorative contour. The master first makes a test assembly rather than stretching fabric over a finished carved part without calculation.

If a painted insert is needed

Plywood and solid wood may react differently to primer and enamel. A compatible preparation system is required for an even color. Even the same paint code can produce different gloss on carved wood and a flat insert. A test sample helps to coordinate the surface.

If a transparent finish is planned

The plywood insert visually differs from solid oak. If the buyer wants the entire backrest to look like a single oak surface, the material and finishing method need to be assessed in advance. Complete texture matching between different bases cannot be promised.

What is included in the work after purchase

Receiving parts, trial assembly, sanding of the selected category, finishing, insert design, and final installation. If the buyer is not ready to organize these stages, a full frame will also not become a completely finished bed without finishing, but at least the main structural elements will be coordinated.

When to buy a separate footboard KRVTC-001-2

The footboard of the bed has strong individual demand, but it is not a universal front panel for any double bed design. KRVTC-001-2 belongs to a specific series and is offered in three widths. It is worth purchasing separately for precise replacement or professional assembly.

Replacing a damaged front panel

If the headboard, side rails, and fasteners are intact, a new footboard allows restoring the appearance without buying the entire frame. First, confirm the size type and measure the connection points. Even the same mattress width does not guarantee compatibility with a bed of a different model.

Selecting a product from the same series

KRVTC-001-2 logically pairs with KRVT-001-1 and KRVT-001 side rails. The pattern, proportions, and material belong to the same system. If the front panel is purchased for a random tall headboard, visual compatibility must be checked separately.

Custom bed with a ready-made front part

A furniture workshop can use the footboard as a ready-made carved element and design the remaining parts. This requires drawings, calculation of side rail height, and connections. Home assembly from unverified parts creates a risk of loosening and size mismatch.

When a low footboard is convenient

The height of 423 mm completes the bed but does not create a high barrier at the foot end. It preserves the view of the headboard and bedding. At the same time, the depth of 125 mm affects the overall length and clearance near the bed, so it cannot be ignored during planning.

How to check the width

For a mattress 1600 × 2000 mm, the footboard has a width of 1775 mm; for 1800 × 2000 mm — 1975 mm; for 2000 × 2000 mm — 2175 mm. This is 175 mm wider than the corresponding mattress. With a symmetrical design, the overhang is approximately 87.5 mm on each side.

Why the footboard is narrower than the headboard

The difference between the corresponding headboards is 89 mm: 1864 vs 1775, 2064 vs 1975, and 2264 vs 2175 mm. This is a confirmed size feature of the series. Parts cannot be aligned by the outer edge, nor should one assume that one of them is chosen incorrectly solely due to the difference. The connection is determined by the side rail design and the drawing.

Beech or oak for the front headboard

For opaque enamel, choose beech; for finishes with visible texture, choose oak. The material must match the headboard and side rails. If the existing bed is made from a different wood species, a single color does not guarantee identical grain and coating behavior.

For a point replacement, you can buy a front headboard for a bed. If a different shape is needed, it is worth opening the category and buy a footboard for a bed after comparing dimensions.

When the complete KRVT-001 frame is more cost-effective than individual parts

A full frame becomes rational not only for a buyer without a bed. It suits all situations where the cost of an error is higher than the difference between a separate part and a kit. If there are no proven side rails, connection drawings, and a compatible footboard, the ready-made system reduces the number of uncertainties.

The bed is assembled from scratch

This is the main scenario. The buyer needs a headboard, footboard, side rails, and connections. Ordering them separately makes no sense if they are already included in KRVT-001. Only the slatted base, mattress, upholstery, and insert design remain separate.

No compatible side rails

Side rails cannot be replaced with two random boards. They determine the length, support the slatted system, and connect the headboard and footboard. Their height, thickness, and mounting points must match the ties and bars. A full kit eliminates the need to design this part yourself.

A full set of connections is needed

Eight reinforced Spiral Lock ties, dowels, and fasteners are included in the delivery. The buyer does not have to search for connectors based on a photo or the size of a single part. This is especially important for a disassemblable double bed that needs to be assembled without random metal plates in visible places.

One wood species and sanding quality are important

It is easier to order a kit in one material and one processing category. For oak, this helps achieve a consistent grain pattern before tinting; for beech, it ensures uniform preparation for enamel. When buying separately later, batch matching becomes less predictable.

No professional connection design

A ready-made frame does not eliminate the need for proper assembly, but it frees the buyer from developing the main parts. If a person cannot accurately show how the new headboard will connect with the existing side rails, purchasing only the headboard is too risky. In such a situation, a full set is more honest.

You need to get an expressive bed without a random mix of parts

KRVT-001 is built as a single carved piece. The high backrest, low footboard, and side rails belong to one composition. The buyer receives not only a structure but also a coordinated scale. This is especially important for a classic bedroom, where the bed occupies the central wall.

For a new bedroom, you can order a ready-made double bed frame in one of three sizes. To compare other models, it is worth buy bed frame through the category after checking the dimensions.

How to choose the frame size for a mattress

The bed size is determined by the mattress, but the dimensions of the finished structure are always larger. For KRVT-001, the length of all three options is 2168 mm, because a mattress length of 2000 mm is supplemented by the thickness of the backrests and structural sections. The width of the frame matches the width of the headboard, not the mattress.

Frame for a mattress 1600 × 2000 mm

The dimensions are 2168 × 1864 × 1509 mm. 264 mm is added to the mattress width, and 168 mm to the length. This size is suitable for a spacious double sleeping area, but still requires checking the passages. If the bedroom is narrow, the 1864 mm body plus nightstands can take up almost the entire wall.

For this standard size, you can buy a frame for a 1600 × 2000 mm mattress, having previously measured the room by its actual dimensions, not by the mattress size.

Frame for a 1800 × 2000 mm mattress

The dimensions are 2168 × 2064 × 1553 mm. This is the most common wide double format, but the carved headboard makes the bed wider than two meters. For two nightstands of 500–600 mm each, a wall of approximately 3064–3264 mm will be required, excluding gaps and baseboards. The exact solution depends on the furniture.

If the bedroom is designed around a wide bed, you can choose a frame for a 1800 × 2000 mm mattress and draw its full outline on the room plan.

Frame for a 2000 × 2000 mm mattress

The size is 2168 × 2264 × 1553 mm. This is a large item that requires not only a wide wall but also a passage at the foot. After installing a wardrobe, chest of drawers, or bench, the free space may be less than expected.

Available for a large bedroom bed frame for a 2000 × 2000 mm mattress. Before ordering, it is useful to mark the floor with painter's tape and open all furniture doors to check the actual passages.

Why you cannot choose the size based only on the number of sleepers

Two people can comfortably use different widths, but the room imposes limitations. The bed must fit together with nightstands, provide access to windows and wardrobes, not block the radiator, and not interfere with the door opening. Mattress comfort is important, but it should not ruin the layout.

How to account for mattress height

The manufacturer recommends a mattress thickness of at least 200 mm. The exact height of the sleeping area depends on the bed base frame, the position of the support slats, and the chosen mattress. Before purchasing, you need to find out how high the mattress will rise relative to the footboard and carved headboard.

How to check the room without a 3D project

Draw a rectangle of 2168 × 1864, 2064, or 2264 mm on the floor. Mark a height of 1509–1553 mm on the wall. Place the future nightstands and check the passages. Then open the wardrobe doors and the bedroom door. This marking quickly shows which size actually fits.

How to choose between beech and oak

The material affects the appearance of all parts: headboard, footboard, and side rails. Beech and oak are available for individual panels and the full frame, but are prepared for different finishing scenarios. The wood species should be chosen simultaneously for the entire visible structure.

Beech for opaque enamel

Beech is suitable for white, milky, gray, black, and colored paints. Under a dense enamel, the natural pattern does not play a major role, but the evenness of preparation and uniform gloss are important. For a classic white bed, beech becomes a rational material.

Oak for transparent or semi-transparent tinting

Oak is chosen when the buyer wants to see the pores and natural pattern. Oil, stain, transparent or tinted varnish change the shade but preserve the character of the wood. On wide side rails and carved headboards, the texture manifests differently, so a test finish is done on several parts.

Why you cannot mix wood species in one set

An oak headboard and a beech footboard will differ under a transparent finish. Even under enamel, the species may show the structure differently. For a full frame, it is better to use one species. To replace an individual panel, the material must match the existing side rails or be intentionally contrasting.

Can oak be painted with dense enamel

Technically, this is possible, but the expressive structure will be covered. If an opaque color is needed, beech is usually more rational. Oak is chosen for enamel only when it is necessary to match the species with an existing structure.

Can beech be left under a clear varnish

The enamel option does not guarantee strict selection of lamellas by shade for transparent finishing. If the buyer wants natural beech, the possibility and visual result must be clarified before ordering. It cannot be automatically assumed that any workpiece is equally prepared for all finishes.

"Standard" or "Prestige": what changes the quality of sanding

For individual headboards, "Standard" and "Prestige" are available. "Standard" involves basic machine preparation, after which the master checks the carving, edges, and planes. "Prestige" includes more detailed manual sanding and reduces the amount of subsequent finishing.

When "Standard" is suitable

This option is rational for a furniture workshop that still performs its own preparation for a specific coating system. The specialist can refine carved areas, plywood inserts, and joints before priming.

When to choose "Prestige"

Manual preparation is useful for transparent finishing of oak, complex carving, and tight deadlines. The more parts in the set, the greater the savings in working time. But "Prestige" does not replace test painting and final control before finishing.

Why sanding should be ordered uniformly

If the headboard has one degree of preparation, and the footboard and side rails have another, the surface may accept primer or tinting differently. For a unified set, it is better to choose the same quality and process all parts simultaneously.

What to buy together with a separate headboard or full frame

The composition of the additional basket depends on the chosen route. For a separate headboard, compatible side rails, footboard, base, and a professional connection project will be needed if they are not already available. For KRVT-001, the main wooden parts are already included, but a slatted base, mattress, and finishing are still required.

The table does not contain links to the bed base, mattress, fabrics, and finishing materials because confirmed URLs for them are not provided. They cannot be invented. These items must be included in the estimate and selected separately according to the project.

How not to confuse the headboard, footboard, and full frame

Headboard is not a finished bed

The tall carved headboard looks like the main element, so the buyer may underestimate everything else. KRVT-001-1 does not include side rails, footboard, mattress base frame, and mattress. If these parts are missing, a single purchase is not enough to assemble the bed.

The footboard is not a side rail

KRVTC-001-2 is installed at the foot end and has a height of 423 mm. It does not replace the side part that connects the headboard to the footboard and supports the mattress base system. The name "front panel" does not mean the product can be turned and used on the side.

A full frame is not a completely finished bed

KRVT-001 includes the main wooden parts and fasteners, but not the mattress or mattress base frame. The buyer must separately create the sleeping area. Finishing is also required, and for a soft headboard design, fabric, padding, and work with plywood inserts will be needed.

The mattress size is not the external furniture size

The designation 1800 × 2000 mm describes the mattress. The frame for it has dimensions of 2168 × 2064 × 1553 mm. If the buyer plans the room based on the mattress, the bed will be wider and longer than expected.

Oak for tinting is not a finished color

The wording means preparing the material for further finishing while preserving the texture. The specific shade appears after oil, stain, varnish, or another chosen system. It cannot be expected that the parts will arrive in the color of the existing parquet without separate work.

Beech for enamel is not a painted product

The material is prepared for an opaque finish, but the finish itself needs to be arranged. Color, primer, gloss level, and technology do not automatically arise from choosing beech.

Plywood inserts are not a ready-made soft upholstery

Inserts are part of a separate headboard, but the fabric and padding are not confirmed. If a soft backrest is needed, the workshop must arrange them separately and check the fit after increasing the thickness.

Practical choice for specific situations

Only the headboard is damaged

Keep the side rails and footboard if they are functional, but first confirm the model, size, and connections. A separate KRVT-001-1 is more cost-effective than a full replacement when the new part fits without complex modifications. If the bed is from a different series, the craftsman must develop an adapter unit before ordering.

Only the footboard is damaged

Check the width of 1775, 1975, or 2175 mm, the height of the side rails, and the location of the ties. KRVTC-001-2 is suitable for spot replacement if the rest of the structure is compatible. There is no point in buying a full frame when the headboard and side parts do not need updating.

There is only a mattress

If the buyer does not have side rails, backrests, and a base, the full KRVT-001 becomes the main route. Choose the size based on the mattress, check the room dimensions, and order the bed base separately. Buying a single backrest in such a situation only delays the need to find the remaining parts.

There is an existing simple frame without a decorative backrest

A separate headboard can update furniture if the frame is rigid enough and allows secure fastening. A tall carved piece creates leverage and should not be held by two random screws. The craftsman evaluates the structure and reinforces the base if necessary.

Need a bed without a footboard

Then the full KRVT-001 does not match the concept because it includes a front panel. A separate headboard suits the author's project, but will require custom side rails, a slat system, and connection calculations. This approach is justified only with professional design.

Need a bed in a unified oak finish

A full oak set for tinting simplifies wood species matching. The headboard, footboard, and side rails are finished simultaneously. If some parts already exist, compare the texture and make a test stain. Even oak from different batches may differ in grain.

Need a white carved bed

Choose beech for enamel. For a new bed, a full frame is more practical because all parts receive the same preparation. If only the panel is being replaced, the craftsman must match the shade and gloss to the existing coating; the white color code alone does not guarantee a match.

The bedroom is small

First, mark the full dimensions. A frame for a 1600 mm mattress takes up 1864 mm in width, and for 1800 mm — 2064 mm. A tall headboard enhances the scale. If walkways disappear, it's better to choose a different size or model rather than give up nightstands and wardrobe access after purchase.

Project for a hotel or country house

For several identical rooms, a full frame simplifies repeatability but requires a single specification for mattresses, bases, and finishes. For a custom room, a separate headboard with custom side rails can be used if the furniture manufacturer handles the calculation and assembly.

Need to update the interior without replacing the mattress

First, determine the exact size of the existing mattress, then compare it with three options. If the mattress is 1600, 1800, or 2000 × 2000 mm and in good condition, you can select a corresponding frame or a separate headboard. The mattress thickness should be at least 200 mm as per the manufacturer's recommendation.

Assembly and preparation: what needs to be decided before delivery

A carved bed requires more preparation than a simple metal frame. The parts are large, the finish is sensitive to damage, and the joints must be tightened without distortion. The earlier the work sequence is planned, the lower the risk of damaging the already painted surface.

Receiving parts

Before finishing, check the number of parts, dimensions, material, sanding quality, and fastener kit. For KRVT-001, count both headboards, two side rails, bars, dowels, eight Spiral Lock ties, and fasteners. For a separate headboard, count the carved part and two plywood inserts.

Trial assembly

If the workshop's technology allows, check the main joints before finishing. This way, mismatches are detected before enamel or varnish. Trial assembly is especially important when combining a separate headboard with existing side rails.

Wood finishing

The carving, planes, and ends are prepared considering the chosen coating. Oak is tinted to preserve the texture, beech is primed for enamel. Joint areas should not be covered with thick layers if it interferes with the fit of dowels or ties.

Insert finishing

Plywood parts are finished separately. For the soft version, first calculate the filler thickness, then check if the fabric covers the decorative frame. Finished inserts are installed after the wooden part has completely dried.

Bed base frame

Its dimensions must match the internal space of the frame and the chosen mattress. The support rests on 40 × 40 mm pine bars. Do not place the mattress without a calculated frame or replace it with random boards if their load and ventilation are not confirmed.

Final assembly

The frame is assembled on a level floor, diagonals are checked, and connections are tightened evenly. Overtightening can damage the wood, while undertightening can cause loosening. After installing the bed base frame and mattress, check stability and ensure no contact with carved elements.

Moving and reassembly

The knockdown system is convenient for transport, but each part must be labeled and protected. Fasteners and dowels are stored as a set. Before reassembly, check the condition of the mounting points, and do not tighten worn connections with the same force.

Mistakes when buying

Purchasing a complete frame and separate headboards/footboards simultaneously

KRVT-001 already includes the headboard and footboard. Additional cards are only needed for replacement, backup, or a separate project. Without a special reason, the buyer duplicates elements.

Choosing a mattress size without checking dimensions

A 1800 mm mattress does not mean a bed width of 1800 mm. The frame reaches 2064 mm, and the length is 2168 mm. The error becomes apparent after delivery when there is no room for nightstands and passage.

Expecting a bed slat base in the kit

40 × 40 mm slats are included, but the base is purchased separately. If not ordered in advance, the bed cannot be prepared for use immediately after assembly.

Purchasing a single headboard without a mounting plan

Matching mattress width does not confirm compatibility. You need to know the side rail height, hole positions, part thickness, and load. Otherwise, you will have to drill into the carved headboard or make adapters after receiving.

Mixing materials

An oak headboard and beech side rails under clear varnish look mismatched. Under enamel, the difference is less, but preparation may still differ. Materials are agreed upon before ordering.

Ignoring plywood inserts

The buyer expects a fully finished upholstered headboard but receives parts for further finishing. Fabric, padding, and labor need to be included in the budget.

Choosing sanding without considering the workshop

"Standard" requires finishing, while "Prestige" reduces its scope. If there is no specialist in carved wood, savings on preparation can lead to expensive manual work after purchase.

Finishing before checking connections

After enameling, it turns out that the fit requires adjustment. Any rework damages the finish. First, check the geometry, then paint.

Incorrect mattress height

A mattress that is too thin changes proportions, leaves the inner part exposed, and may not meet the recommendation of 200 mm. A mattress that is too high covers more of the headboard and changes the position relative to the footboard. The height is assessed in cross-section.

Purchase without checking delivery access

A headboard up to 2264 mm wide and 1553 mm high must fit through doors, stair turns, and elevators. Disassembled delivery helps, but the route is still measured in advance.

Who a separate headboard is suitable for

• owner of a compatible frame with functional side rails and footboard;
• for a customer who is only replacing a damaged backrest;
• for a furniture workshop with its own joint design;
• for a bedroom where a high carved accent is needed without a full bed update;
• for a project with custom side rails and a slat system;
• for a customer ready to separately finish two plywood inserts;
• for a case where the material and finish of the existing bed are confirmed.

Who is a separate footboard suitable for

• for a targeted replacement of the front headboard of the same series;
• for a custom bed with already calculated side rails;
• for a customer who needs a specific width of 1775, 1975, or 2175 mm;
• to preserve the KRVT-001 design without a complete replacement of the structure;
• for an oak set for tinting or a beech set for enamel;
• workshop that checked the fastenings and height of the side rails.

Who benefits more from the full KRVT-001

• for a buyer assembling the bed from scratch;
• for those who do not have ready-made side rails and a connection system;
• for mattresses 1600, 1800, or 2000 × 2000 mm;
• for a bedroom where a unified carved series is important;
• for ordering one wood species and uniform sanding of all parts;
• for a project without independent calculation of main connections;
• for a customer who understands that the mattress and bed frame are purchased separately.

When it's better to choose another option

• the room size does not allow for the dimensions of KRVT-001;
• a different size mattress is needed;
• the project requires a bed without a footboard, but there is no furniture workshop;
• the tall carved headboard does not match the bedroom style;
• the existing frame cannot be safely connected to a separate headboard;
• the customer needs a fully ready bed with mattress, base, and upholstery without additional work;
• there is no way to bring large parts into the room;
• finishing and assembly are not included in the project plan.

How to buy a headboard, footboard, or frame for STAVROS

First, determine the composition of the existing structure. If the side rails, base, and one of the headboards are intact, open the individual part card. If there is only a mattress or the bedroom is being designed from scratch, proceed to the full frame. Do not add individual headboards to KRVT-001 again.

To replace the back part, you can select the bed's back headboard and check the full dimensions. For the front part — choose a footboard matching the mattress width. For a new structure, it is worth buy the carved bed frame KRVT-001.

If a specific model does not fit, you can open the catalog of oak and beech frames, the catalog of wooden headboards or wooden footboards made of oak and beech.

Before ordering, provide the manager with the mattress size, room plan, selected material, sanding quality, and information about the existing bed. For a separate headboard, photos of the side rails and fasteners are useful. For a full frame, include the layout diagram, bed base frame, and delivery route.

How to prepare an order as one batch

A carved bed consists of large parts that will be together for many years. Even a slight difference in wood, sanding, or color becomes noticeable on long side rails and a tall headboard. Therefore, it is better to order the full set, as well as spare or replacement parts, at the same time if the project is already defined.

Create a parts list

For a separate headboard, specify the article number, size, wood species, sanding quality, and information about the existing side rails. For a complete KRVT-001, add the bed base frame, mattress, finish, and inlay design. Such a list shows what is included in the card and what needs to be ordered or made separately.

Set a unified finish

For beech, record the enamel code and gloss level. For oak, the selected stain, oil, or varnish. A test sample must be approved before processing the entire batch. The color on the screen does not replace a real sample, especially next to the floor, nightstands, and bedroom doors.

Check the delivery route

The tall headboard reaches 2264 mm in width and 1553 mm in height. Even disassembled parts must pass through the entrance, elevator, doorways, and corners. Before ordering, measure the narrowest section of the route and determine a room for safe unpacking.

Prepare the space for finishing and assembly

Parts should not be stacked while wet, placed on sharp edges, or painted in a cramped room without protection. The carved headboard requires a level support and access from both sides. If the work is done by a workshop, it is better to deliver the bed to the bedroom after the coating has fully dried.

Save the kit data

Write down the article numbers, size, wood species, coating, and fastener composition. This information will be useful during relocation, reassembly, or replacement of a part. For oak, it is helpful to save a tint sample; for enamel, the exact code and manufacturer of the system.

FAQ: separate headboard or full frame KRVT-001

What is included in the full frame KRVT-001?

Headboard, footboard, two side rails, pine bars 40 × 40 mm, wooden dowels, eight reinforced Spiral Lock ties, and fasteners.

Is the mattress included in the set?

No. The mattress is purchased separately. The manufacturer recommends a thickness of at least 200 mm.

Is the slatted base included?

No. The frame has support bars, but the base itself is purchased separately.

Can I buy just the headboard?

Yes, if the existing side rails and base are compatible. Before ordering, you need to check the dimensions and attachment points.

Can I buy just the footboard?

Yes. KRVTC-001-2 is sold separately in three sizes, but it only fits after checking the bed's construction.

Do I need to buy separate headboards with KRVT-001?

No. Both headboards are already included in the full frame. An additional purchase is only needed for a special purpose.

What sizes of headboard are available?

1864 × 1508 × 64, 2064 × 1553 × 64, and 2264 × 1553 × 64 mm.

What sizes of footboard are available?

1775 × 423 × 125, 1975 × 423 × 125, and 2175 × 423 × 125 mm.

What are the dimensions of the full frame?

2168 × 1864 × 1509, 2168 × 2064 × 1553 or 2168 × 2264 × 1553 mm.

Why is the frame wider than the mattress?

The width is increased by the headboards and structural elements. For all three options, the increase to the mattress width is 264 mm.

Why is the footboard narrower than the headboard?

This is a feature of the series geometry. The corresponding headboards differ in width by 89 mm.

What material should I choose for the frame under white enamel?

Beech under enamel. It is designed for opaque finishing.

What should I choose for natural tinting?

Oak under tinting, if you need to preserve a pronounced texture.

How does "Standard" differ from "Prestige"?

"Standard" requires additional inspection and finishing, "Prestige" includes more detailed hand sanding.

Is the headboard delivered assembled?

It is delivered disassembled: the carved part and two plywood inserts.

Are the inserts upholstered?

There are no confirmed fabric and padding in the package. They are selected separately.

Can KRVT-001-1 be installed on a different model of bed?

Only after professional checking of the width, side rails, and fastenings. Universal compatibility is not claimed.

What is more advantageous when assembling from scratch?

The full KRVT-001, because the main parts and connections are already included in the kit.

What is more advantageous if one backrest is damaged?

A separate part, if the rest of the structure is intact and compatible.

How to check if a bed will fit in a room?

Mark the full dimensions on the floor and the headboard height on the wall. Check nightstands, doors, wardrobe, and clearance at the foot of the bed.

Can I use a mattress thinner than 200 mm?

The manufacturer recommends a thickness of at least 200 mm. Other options need to be individually checked for proportions and construction.

Is professional assembly required?

It is recommended for large carved beds. Especially with a separate headboard, non-standard side rails, and complex finishing.

Where can I compare other frames?

In the category, you can select a frame for a double bed and compare models by size and material.

What should I check before payment?

Size type, full dimensions, material, sanding, set composition, mattress base, mattress, finishing, and delivery access.

Conclusion: a separate headboard is beneficial for targeted replacement, KRVT-001 for a new bed

The headboard KRVT-001-1 and footboard KRVTC-001-2 are worth buying separately when the other parts already exist, are functional, and are confirmed compatible. This approach saves replacing the entire structure but requires a precise mounting design, matching dimensions, wood species, and finish.

The full KRVT-001 is more appropriate for a new bed. It includes both panels, two side rails, support bars, dowels, eight Spiral Lock connectors, and hardware. The buyer only needs to choose a slatted base, a mattress at least 200 mm thick, the finish, and the insert design.

Before ordering, you should compare not the price of a single item but the full composition of the cart and the work involved. If a separate panel requires manufacturing side rails and complex transition components, the kit may be more cost-effective. If only one part of a compatible bed is damaged, a full replacement is excessive.

On the STAVROS website, you can choose individual panels or Buy full frame KRVT-001. An informed choice helps assemble a bed without duplicating parts, random connections, or mismatches in width, material, and finish.