Baluster L-054 is already selected, but the starting post is not yet: how to order a wooden staircase kit and not replace the recommended L-055 with a random profile

In the staircase project, the baluster is already approved: L-054, height 1000 mm, size B=70 mm, beech or oak, "Prestige" sanding. The balusters are counted along the flight, the visual rhythm is agreed upon, and the buyer moves to the next line of the estimate — "starting post". If only the wording "wooden post 100 mm" is left in this line, the project again turns into a selection by picture: the catalog has many posts of the same cross-section, but with different turned profiles, heights, materials, and processing quality.

L-054 has a more precise starting point. In the current product card, STAVROS itself recommends the starting post L-055 for it, and the L-055 card separately links this model to L-054. This does not mean that L-055 is the only acceptable post for any staircase. But if the task is to preserve the already selected turning character, it is logical to first check the recommended pair rather than start the selection anew among dozens of similar options.

The correct purchasing scheme looks like this: L-054 is fixed as a regular baluster → L-055 is checked as a recommended starting post → the designer confirms the geometry and installation units → material, sanding, and finish are consolidated into one list → only after this is the order placed.

Wooden baluster L-054

from 55.76 $

Go to Catalog

Wooden baluster L-054 1000×70 mm: what is already fixed in the project

L-054 currently has one standard size line:

Price as of the check date — September 8, 2026.

For the purchaser, this is already a complete product line:

L-054 / 1000 × 70 mm / beech or oak / Prestige / For enamel / quantity ___ pcs.

If the model has not been purchased yet, buy wooden baluster L-054 it is better after the post is also fixed in the same list. This way, the visible part of the staircase goes into the order as a set, rather than as several separate purchases.

Watch video ...

Entrance post L-055 1200×100 mm: why it appears next to L-054 is not accidental

L-055 has a standard size of 1200 × 100 mm, is made from beech and oak, and is available in "Standard" and "Prestige". On current STAVROS pages, the model is displayed at a price from 13,470 ₽; the exact cost of the selected wood type and sanding must be re-checked in the product card before payment.

The main thing here is not the price, but the connection between the two models. In the description of L-054, the manufacturer directly states that entrance posts L-055 are well suited as a set for it. The card of L-055 itself, in turn, indicates compatibility with turned elements L-054.

This is stronger than random selection based on a similar photo: the manufacturer itself brought the two models together into one visual pairing.

But the wording "well suited" is not a technical prohibition on other posts. If the designer deliberately chose a different post and checked the geometry of the railing, it can be used. The purpose of the article is not to declare L-055 mandatory, but to not lose the recommended pair due to a too vague procurement line.

For the bill of quantities, it is better to use a direct link buy wooden post L-055 for stairs and record the exact article number.

Our factory also produces:

Relief decoration NPU-092

from 15.57 $

Wooden capital KL-033

from 81.47 $

Wooden Bracket KR-034

from 128.67 $

Wooden Bracket KR-058

from 22.57 $

Wooden capital KL-067

from 24.74 $

Wooden baseboard / casing PLT-001-1

from 27.64 $

How to decorate a home and room: interior design ideas, wall and door decoration

from 22.93 $

Stucco decoration set CPU-9-2

from 113.22 $

View Full Product Catalog

Why the line "wooden post 100 mm" is too vague

Entry:

wooden post 100 mm — 2 pcs.

does not define the product.

It does not specify:

• article number;
• height;
• character of the turned profile;
• the material;
• the quality of sanding;
• quality of re-gluing;
• quantity for a specific stair node.

Even the coincidence of B=100 mm does not make different posts interchangeable. Two products of the same cross-section can look completely different next to L-054.

The working line should look like this:

L-055 / 1200 × 100 mm / beech or oak / Standard or Prestige / For enamel / quantity ___ pcs.

After this, the manager does not need to guess which specific "100 mm post" the designer meant.

Turned baluster and turned post: checking the pattern, not just the dimensions

L-054 has 1000 × 70 mm, L-055 — 1200 × 100 mm. These numbers show the scale, but do not explain why the manufacturer recommends them together.

In the stair railing, the repetition of the turned profile is visible: thickenings, grips, necks, smooth transitions. If the balusters have one rhythm and the post has a completely different one, the overall system is perceived as disjointed even with the same wood species.

Therefore, when choosing a post, it is useful to look at simultaneously:

1. facade view L-054;
2. facade view L-055;
3. the overall layout of the fence;
4. the scale of transition from a regular baluster to a larger post.

A 100 mm cross-section by itself does not describe this connection. That is why a random post of the same size is not an automatic replacement for L-055.

Buy L-054 now, choose the post later: where the risk appears

Separate purchasing seems convenient: there are many balusters, they are counted first, and there are few posts — "we will buy them later."

The risk appears when the first batch is already ordered and the specification is partially fixed.

For example, L-054 are ordered from beech in "Prestige" for enamel. A month later, another buyer opens the catalog and chooses a similar post from oak in "Standard" because the list only says "100 mm post." Formally, he fulfilled the entry. Visually and technologically, the set has changed.

The second problem is timing. If the balusters are manufactured and the chosen post is not in stock, the installation schedule starts to depend on a second separate batch.

The third is finishing. The balusters may have already gone to the painting area, while the post will be approved later with different surface preparation.

Therefore, it is more advantageous to design and specify the main visible staircase elements simultaneously, even if actual payment or shipment occurs in several stages.

Beech balusters: should L-055 also be beech?

It is not "required" in a technical sense. But if the project's goal is a single material and a single finish, the wood species must be explicitly specified for both models.

In the list:

L-054 — beech

L-055 — beech

Or:

L-054 — oak

L-055 — oak

You cannot assume that this automatically follows from the words "one staircase".

The wood species is especially important in semi-transparent coatings, where the texture remains visible. With opaque enamel, the wood color is covered, but this does not turn beech and oak into the same blank: differences in structure, price, and processing remain.

If the project is only selecting balusters, Buy wooden balusters for stairs it can be from a profile selection, but after approving L-054, it is better not to blur the specification.

Oak L-054 and L-055: the same wood species does not yet complete the specification

Even if both items are recorded as oak, other parameters remain:

• L-054 — 1000 × 70 mm;
• L-055 — 1200 × 100 mm;
• L-054 currently has only "Prestige";
• L-055 has "Standard" and "Prestige";
• quality of re-gluing;
• quantity;
• purpose in specific nodes.

Therefore, the line "the entire staircase is oak" is useful but insufficient.

For a purchaser, it is important to separate the general parameters of the series from the parameters of each item. The common material can be written once in the header of the list, while the size, article number, sanding, and quantity should be in separate lines.

L-054 is only "Prestige", while L-055 comes in "Standard" and "Prestige": what to write in the estimate

This is a real fork in the road that is easy to miss.

L-054 in the current card is presented only in the "Prestige" sanding. For L-055, the manufacturer offers "Standard" and "Prestige".

Therefore, one cannot assume that when ordering a pair, the quality of finishing will match on its own.

If the staircase set must have the same degree of surface preparation, the estimate can specify:

L-054 / Prestige

L-055 / Prestige

If the workshop deliberately wants to take L-055 in "Standard" and finish the post on its own, this is also an acceptable purchasing decision—but it must be stated explicitly.

The main thing is that the mixing of qualities does not occur accidentally due to the default card configuration.

"Under enamel" for the baluster and post: identical finishing starts with an identical specification.

Both models can be ordered in the "Under enamel" version. This is a veneering quality designed for opaque finishing; it does not mean a ready-made white coating.

For a painting workshop, it is useful to receive a set in which the following are already coordinated:

• wood species;
• the quality of sanding;
• quality of re-gluing;
• the color of the future enamel;
• the gloss level;
• number of parts.

There is no need to explain to the painter why one part turned out to be "Under enamel" and another in a different blank, only after receiving the goods.

If the project changes to a transparent or semi-transparent finish, the specification must be revised before payment.

What a correct purchasing pair L-054 + L-055 looks like

The basic template can be inserted directly into the estimate:

Baluster L-054 / 1000 × 70 mm / beech or oak / Prestige / For enamel / quantity ___

Post L-055 / 1200 × 100 mm / same agreed wood species / Standard or Prestige / For enamel / quantity ___

Below, common project fields are added:

Color/finish: ___

Stair flight: ___

Railing drawing: version ___

Approval date: ___

Such a document remains clear even if it passes through several people: designer → specifier → manager → stair workshop.

How many L-055 are needed together with balusters L-054

A universal rule of "one post per N balusters" cannot be used.

The number of posts is determined by the architecture of the specific staircase. The schedule must separately account for:

• start of the flight;
• end;
• turn;
• platform;
• upper node;
• other points where the project specifies a post.

For example, 32 balusters do not automatically mean two, three, or four L-055. Balusters and posts are counted according to different rules.

It is useful to keep two tables:

So the buyer does not try to derive the number of posts from the number of regular elements.

Why L-054 and L-055 cannot be ordered just from a photo

A photo shows the style well, but works poorly as a purchasing document.

In a photo, it is impossible to reliably capture:

• the exact model;
• size;
• the material;
• the quality of sanding;
• quality of re-gluing;
• quantity;
• the mounting orientation.

The scenario where a designer sends a screenshot of a staircase with the caption "approximately this post" to the supplier is especially dangerous. The catalog may contain several visually similar products, and the buyer may choose the wrong model without violating the formal specification.

Therefore, after visual selection, an item-number specification always appears.

What to compare on the drawing before paying for L-055

The manufacturer's style recommendation does not replace checking the staircase project.

On the drawing, it is necessary to confirm:

• the height of the post relative to the handrail;
• the position of the beginning and end of the turned part;
• the reference to the step, floor, or landing;
• the connection with the handrail;
• the place next to the first L-054;
• the mounting assembly;
• free space for the decorative part.

If one of these parameters requires a different geometry, the designer may choose another post. In such a case, the replacement must be deliberate and reflected in the schedule.

Is it possible to use another STAVROS post instead of L-055

Yes.

Cards L-054 and L-055 provide a recommendation for combination, not a prohibition on other solutions.

Another post may be selected if:

• the project requires a different height;
• a different character of decor is needed;
• the handrail forms a different joint;
• the staircase style changes;
• the client wants a more expressive initial accent.

But this should be a decision of the designer or engineer, not a random replacement by a purchaser because it is "also 100 mm."

If you need to select alternatives independently, you can look at Wooden posts for the staircase, and then re-check the selected model against L-054.

First, the entire visible system, then a large batch of balusters.

Even if the balusters are already counted, before ordering dozens of L-054 it is useful to approve the minimum:

1. L-054;
2. entry/starting post;
3. remaining posts at nodes;
4. handrail;
5. the material;
6. quality of finishing;
7. finish;
8. railing drawing.

This does not mean that all components must be purchased at the same time. The point is different: a large batch of balusters should not go into production until the main adjacent elements are verified against the project.

If it later turns out that the post requires a different handrail height or a different composition, the correction will affect the already ordered series.

What to check when receiving L-054 and L-055 in one batch

Acceptance should separate models but check the overall set.

For L-054:

• article number;
• 1000 × 70 mm;
• beech or oak;
• "Prestige";
• quantity.

For L-055:

• article number;
• 1200 × 100 mm;
• the material;
• "Standard" or "Prestige" per estimate;
• quantity.

After that, it is useful to place one baluster and one post side by side before painting. This allows you to once again check the visual connection, scale, and compliance with the project.

If one item arrives with different sanding or wood species, it is better to detect this before sending the entire batch to the painting area.

A small budget calculation: why the post cannot be forgotten in the estimate

L-054 made of beech "Prestige" costs 4,620 ₽ per piece. If the project, for example, needs 24 balusters:

24 × 4 620 = 110 880 ₽.

These are only the balusters.

L-055 on the current STAVROS pages is displayed from 13,470 ₽ per piece. Even two posts add no less to the budget:

2 × 13,470 = 26,940 ₽ at the minimum displayed price.

And already without the handrail, fasteners, finishing, and installation, the visible pair of items costs at least:

110 880 + 26 940 = 137 820 ₽.

This example is not a ready-made staircase estimate: the exact price of L-055 depends on the material and sanding. It shows something else — the abstract line "posts later" distorts the budget even before ordering.

One control pair before a large batch: when it is more useful than catalog comparison

If the project includes dozens of L-054 and the staircase has not yet been sent for finishing, it is reasonable to first check one physical pair: one L-054 baluster and one L-055 post in the same material and quality planned for the entire staircase.

Such a check answers several questions at once. On real parts, you can see how much larger the post is, how the turned sections relate, where the visual transition from the regular baluster rhythm to the accent element begins, and how the chosen wood species looks on adjacent parts.

If the project involves opaque enamel, the control pair can also be used to approve the finishing sample. It is important not to confuse the coating sample with a ready-made mounting system: a visually successful pair still needs to pass verification against the railing drawing.

This is especially valuable for a large batch. An error in one selected post is corrected with one line in the specification. An error discovered after manufacturing several dozen balusters and a full set of posts affects the entire budget and schedule.

After approving the control pair, the date and specific parameters are recorded in the bill of quantities:

Thus, the buyer does not return to selecting a "similar post" with each subsequent order.

The recommended pair does not cancel the structural check of the staircase.

The manufacturer's statement that L-055 pairs well with L-054 primarily refers to the product and visual combination. It does not replace the calculation of the railing itself.

Before ordering, the designer must confirm:

• where exactly the starting post is located;
• how it connects to the base;
• how the handrail approaches it;
• where the row of balusters ends;
• what the design height of the railing is;
• which joints work at turns and landings;
• Is the same post needed at the end or intermediate point?

You cannot make the reverse inference: "since the manufacturer recommends L-055 for L-054, it means it can be installed at any point on the staircase without additional calculation." The recommendation helps choose the external language of the system, while the installation and structure are approved by the staircase project.

This is especially important when replacing old railing. New L-054 and L-055 may visually match each other, but the existing base, flight geometry, and old embedded parts require separate verification.

Why it is better to fix L-055 before calculating the handrail and connections

If the post in the estimate is still conditional, the handrail project also remains partially conditional. The height and geometry of the entry element affect how the beginning of the railing will look and where the handrail line runs.

Therefore, in the working sequence, it is advisable to approve L-055 before all connections around the first step are finalized. This does not mean that the post "determines everything" — it simply becomes a known point instead of an abstract 100 mm rectangle.

For the designer, a triple is useful:

L-054 → L-055 → selected handrail.

Each item must have its own article number and drawing. If the handrail requires a different node, the decision is made on the drawing, not during installation.

It is especially risky to leave L-055 for a late stage in a project with a painted set. If it turns out after manufacturing the balusters that the new post changes the handrail line, the adjustment will affect not only one element but also the placement of adjacent parts.

How to accept balusters and posts if they arrive in different shipments

Even when the specification is compiled as a single list, shipments may not arrive simultaneously. In this case, completeness should be checked against the document, not against the fact of "what arrived."

The first batch of L-054 should not automatically be considered closed while an unconfirmed item L-055 remains in the list. When accepting balusters, keep one control sample without finishing for comparison with the post.

When L-055 arrives, check:

1. article number;
2. size 1200 × 100 mm;
3. the material;
4. sanding;
5. quality of re-gluing;
6. visual connection with the control L-054.

If finishing is done later in a single cycle, both items are handed over to the painter together. If painting has already started, it is necessary to confirm that the new batch is prepared according to the same specification.

Thus, separate logistics does not turn into separate design.

When it is better not to order L-054 in a large batch yet

The purchase should be postponed if:

• L-055 or another stair post has not been selected at all;
• the handrail is not aligned with the start node of the staircase;
• it is unknown where and how many posts are required;
• the material of the balusters is approved, but the material of the posts is not;
• the finishing between the parts is not yet agreed upon;
• the designer has not confirmed the geometry of the railing;
• the client is choosing between several post styles, and the decision may change the entire first node of the staircase.

This does not mean that L-054 cannot be purchased separately. It is only about a large batch for a new staircase, where adjacent elements are still uncertain.

If L-054 replaces existing balusters, and all other nodes are preserved, the scenario is different: then the article about the L-054 + L-055 set may not be the main guide for the project at all.

Where to buy L-054, L-055, and other staircase elements

If the combination is already approved, the product points are clear: L-054 and L-055 are listed as separate line items.

If a baluster is still being selected, balusters for staircase to buy it can be from the general category.

For the entire system — balusters, posts, handrails, and other parts — the section is useful Components for wooden staircase. It is needed specifically at the stage of overall kit verification, not instead of a precise product specification.

The practical conclusion is this: L-054 already sets the visual direction. Before looking for "any 100 mm post," first check L-055, which the L-054 card itself recommends. If the project accepts this pair, both items are recorded in one list before ordering.

Questions before ordering L-054 and L-055

What is the size of L-054?

1000 × 70 mm.

What materials are available for L-054?

Beech and oak.

What sanding finish does L-054 have?

In the current card — only "Prestige".

What is the size of L-055?

1200 × 100 mm.

Why is L-055 considered together with L-054?

Because the L-054 card directly recommends L-055, and the L-055 card separately mentions combining with L-054.

Is L-055 the only acceptable column for L-054?

No. It is a recommended visual pair, not the only possible technical combination.

Can L-055 be replaced with another 100 mm column?

Only after checking the project. The same cross-section does not mean the same profile, height, and mounting assembly.

Do I need to take L-055 from the same wood species as L-054?

If the project requires a single material — yes, this needs to be recorded in the specification. Technically, a different material is possible as a deliberate design decision.

What to do if L-054 from "Prestige" and L-055 is selected in "Standard"?

Record this explicitly and agree on the scope of additional preparation for L-055. Do not leave the difference to chance.

"Under enamel" means ready-made paint?

No. This is the quality of the blank re-lamination for opaque finishing.

Can I first order all balusters and choose the posts later?

Yes, but the risk of inconsistency in material, sanding, timelines, and visual profile becomes higher. It is better to approve the entire visible set before a large batch.

How many posts are needed for one staircase?

There is no universal number. The quantity is determined by the start, end, turns, landings, and other nodes of the project.

Do I need to take one L-055 for a certain number of L-054?

No. There is no such proportion. Balusters and posts are counted based on different elements of the drawing.

What should be checked on the L-055 drawing?

Height, cross-section, turned profile, connection to the handrail, mounting assembly, and position relative to the first baluster.

What should be checked last before payment?

SKUs L-054 and L-055, dimensions, material, sanding, quality of lamination, quantity, and current prices for both product lines.