Buy round table frame: STL-030 or STL-031 — which to choose for the tabletop

Buying a round table frame is easier when the buyer understands not only the base dimensions, but also the structure of the apron belt, the method of attaching the tabletop, material, finish, and confirmed configuration. STL-030 and STL-031 are similar in size: the first has dimensions 1090 × 740 × 1054 mm, the second — 1067 × 740 × 1054 mm. The difference in the first parameter is only 23 mm, but this is not enough to consider the models completely interchangeable.

STL-030 is described as a round table frame with four legs, four semicircular aprons made of bent laminated plywood 24 mm thick with beech or oak veneer, an internal reinforcing crosspiece, and decorative inserts made of stainless steel or brass. Each apron has two through holes Ø8 mm for attaching the tabletop. The frame is supplied disassembled and is assembled using dowels, Spiral Lock eccentrics, and metal wedge catches.

STL-031 — a wooden frame of similar format, size 1067 × 740 × 1054 mm, made of beech or oak. Material, dimensions, preparation for enamel or tinting, and use in home, office, cafe, or restaurant are confirmed for it. The tabletop is selected separately. The structure of the aprons, presence of crosspiece, holes, and specific configuration must be checked according to the card and drawing, and not transferred from STL-030 based on external similarity.

Both models require separate selection of the tabletop. The first dimension of 1090 or 1067 mm does not automatically equal the recommended tabletop diameter. The actual base contour, leg position, aprons, mounting holes, overhang, slab thickness, center of gravity, and overall height of the finished table must be considered. Different calculation conditions apply for solid wood, painted MDF, stone, and composite.

Buy frame STL-030 Buy frame STL-031 View all table frames Choose a tabletop

Go to Catalog

Confirmed specifications of STL-030 and STL-031

Main differences between two frames

Our factory also produces:

View Full Product Catalog

What is an apron frame for a round table

The apron frame connects the legs into a rigid belt under the tabletop and creates a base for attaching the top plate. For a round table, the aprons may have a semi-circular geometry that follows the shape of the future tabletop and helps distribute connections around the center.

The frame differs from a set of four separate legs in that the legs are already connected by the structure. The buyer does not need to design each corner independently, but still needs to check the assembly, tabletop fastening, and permissible load.

STL-030 reveals the device in detail. STL-031 requires reading the card and drawing to avoid attributing elements of another model to it.

Why two almost identical sizes require separate verification

A difference of 23 mm in the first parameter can affect the position of legs, apron contour, and overhang, but does not in itself indicate quality or strength.

The same height of 740 mm and the third parameter of 1054 mm create the impression of full interchangeability. In practice, holes, internal elements, and attachment points may differ.

Therefore, the tabletop cannot be ordered using a single common template before comparing two DWG files.

When to buy STL-030

The model is suitable for a buyer who needs a documented apron system with an internal cross brace, Ø8 mm holes, and decorative inserts.

It is especially interesting for an expressive round dining table and a heavy tabletop when the structure is verified by calculation.

Before ordering, you can buy table frame STL-030 and check the metal inserts, material, and configuration.

When to buy STL-031

STL-031 is suitable for a project that requires a wooden frame of a similar format measuring 1067 × 740 × 1054 mm made of beech or oak.

It cannot be automatically considered a simplified or weaker version of STL-030. The buyer must open the drawing and check the specific design.

For such a project you can buy table frame STL-031 after agreeing on the tabletop.

Why is the first dimension 1090 or 1067 mm not equal to the diameter of the tabletop

The first parameter describes the frame, not necessarily the outer diameter of the finished table. The tabletop must overlap the base with a calculated overhang, so its diameter is determined after studying the drawing.

You cannot simply add the same number to 1090 and 1067 mm. The actual extreme points of the legs, the contour of the aprons, mounting holes, and the material of the slab are important.

For stone and composite, the overhang is checked especially carefully because the mass and rigidity of the material differ from wood and MDF.

How to calculate the overhang of a round tabletop

Overhang is the distance from the outer contour of the frame to the edge of the tabletop. It affects the appearance, knee space, stability, and load distribution.

An overhang that is too small visually makes the frame appear wider than the tabletop and can interfere with seating. An overhang that is too large increases leverage and requires calculation of the slab and fastening.

The working value is selected based on the DWG, tabletop diameter, material, and intended use. There is no universal figure for both models.

How to make a tabletop template

Before ordering an expensive slab, it is useful to cut a circle from cardboard or lightweight sheet material. Mark the center, frame outline, and intended fastening points on the template.

Install the template over the assembled base and check the overhang from all sides. Then arrange chairs around it and evaluate the space for passage.

Such a mockup does not replace calculation, but helps to detect proportion errors before manufacturing the array or stone.

Can one tabletop be installed on both frames

Theoretically, similar dimensions may allow the same outer diameter, but this cannot be stated without two drawings.

The position of aprons, holes, crosspiece, leg contour, and permissible overhang may differ. A tabletop that conveniently attaches to STL-030 is not guaranteed to match STL-031.

Before reusing an existing slab, overlay the fastening diagrams and check the center.

How to check the center of the tabletop

The center of the round slab must align with the geometric center of the frame. Displacement changes the overhang on the sides and can impair stability.

On the STL-030, the apron belt and inner crosspiece serve as guides, but the exact axis is determined by the drawing and actual assembly.

On the STL-031, the center is checked separately, without copying the markings of another model.

How to check the center of gravity of a finished table

The center of gravity depends on the mass and shape of the tabletop, the location of the frame, and objects on the surface. A heavy slab can change the table's behavior even with precise centering.

A large overhang or an oval tabletop extending far beyond the supports is especially dangerous. Such solutions require a calculation of tipping stability.

The card size does not confirm the safety of a specific combination.

Can an oval tabletop be installed

An oval slab may only be used after a separate project. Its long axis creates a different overhang and leverage compared to a circle.

STL-030 is described as a round table frame, so the oval shape cannot be considered standardly compatible.

For STL-031, a drawing is also required, along with checking attachment points and stability. External similarity to a round base is insufficient.

How to choose the diameter for four seats

STL-030 is designed for a round table for approximately four seats, but the final diameter depends on the width of chairs, tableware, and free space.

You cannot determine the exact diameter solely from the number of guests. You need to place four chairs around the template and check if elbows and legs collide.

For STL-031, the number of seats and diameter are coordinated separately according to the project.

How to check legroom

The apron and legs take up space under the tabletop. The buyer needs to check not only the outer diameter but also the inner free area.

The chair is moved to the template at the actual height. Knees should not hit the apron, and feet should not hit the crosspiece or legs.

On STL-030, the inner crosspiece is confirmed, so its position must be considered. For STL-031, this element is first checked according to the drawing.

Frame height and final table height

Both models have a height of 740 mm. The final height of the finished table increases by the thickness of the tabletop and any possible mounting layer.

You cannot call a finished table 740 mm high if the slab is installed on top. For thin MDF, solid wood, and stone, the result will be different.

The height is checked together with chairs, armrests, and the user's seating position.

How to choose chairs for a height of 740 mm

Chairs are selected after calculating the final height including the tabletop. The seat height, presence of armrests, and the ability to slide the chair under the apron are important.

A round table on four legs requires checking that each leg does not interfere with the comfortable seating area.

For a unified wooden composition, you can choose wooden chairs for a round table, but dimensions and seating are checked separately.

How STL-030 works with semi-circular aprons

Four semi-circular aprons form a closed belt and replicate the general character of a round table. The 24 mm thick bent-laminated plywood is veneered with selected wood species.

This device helps connect four legs and create a surface for attaching the tabletop. It does not eliminate the need to follow the assembly diagram.

Aprons cannot be replaced with random straight parts without a new calculation and design.

Why STL-030 has an internal cross brace

The cross brace connects the inner part of the frame and participates in the overall structural design. Its presence is confirmed, but the specific function and permissible loads cannot be extended beyond the specification card.

For the buyer, it provides a clearer basis for discussing a heavy tabletop and fastening. However, stone or solid wood still require calculation.

The cross brace also affects the space under the table and must be shown on the template.

What to check for the apron belt of STL-031

For STL-031, you cannot automatically write about four semi-circular aprons, 24 mm plywood, a cross brace, or Ø8 mm holes.

The buyer must open the DWG and determine the shape of the belt, the material of the parts, and the connection points with the legs and tabletop.

Such verification does not mean the model is worse. It means the article honestly separates confirmed and unconfirmed data.

How the tabletop is attached to STL-030

Each of the four stretchers has two through holes Ø8 mm. They provide confirmed points for designing the attachment.

The hole diameter does not automatically indicate the type, length, and completeness of the fastener. Bolts, screws, washers, bushings, and inserts are selected based on the tabletop and instructions.

Wood and stone require different connection methods and compensation for material movement.

How to check the attachment of STL-031

First, study the card and DWG, then the actual delivery set. It cannot be assumed that the holes match STL-030.

If the tabletop is already drilled, its layout is compared with the frame before ordering. New holes must not weaken the stretchers or intersect with connections.

In the absence of data, specific fasteners are clarified with the manager and the master.

What is Spiral Lock in STL-030

The card confirms the use of Spiral Lock eccentrics as part of a detachable joint. They work together with dowels and metal wedge catches.

It is important for the buyer to assemble the frame according to the intended scheme and not replace elements with random analogues without checking.

The completeness and tightening sequence are checked before finishing to avoid discovering a missing part after painting.

Why dowels and wedge catches are needed

Dowels help position wooden parts, and metal wedge catches participate in connecting STL-030 elements.

Each node has its own place. It cannot be assumed that one type of fastener is sufficient for complete assembly.

When disassembling and reassembling, parts are marked to preserve the original position of legs and stretchers.

Why the frame is supplied disassembled

Disassembled delivery facilitates transportation of the large base and allows finishing parts before final assembly.

At the same time, it requires careful acceptance of the kit, reading the diagram, and test assembly.

For STL-031, the current delivery form and completeness must be checked separately, rather than copying the wording from STL-030.

Is it necessary to assemble the frame before painting?

Dry assembly shows whether all parts are in place, whether the connections match, and whether the base sits level. For STL-030, it is especially important due to the aprons, crosspiece, and several types of connections.

After checking, the frame can be disassembled for finishing if it aligns with the technology. Contact and fastening surfaces are protected from excessive coating.

STL-031 is also checked before finishing according to its own instructions.

STL-030 for a solid wood tabletop

Solid wood creates significant self-weight and changes dimensions with humidity fluctuations. The fastening must account for the material of the slab, the direction of the grain, and the intended design.

The Ø8 mm holes in the aprons provide points for design, but do not confirm a universal scheme for any solid wood.

The diameter, thickness, and overhang are agreed upon before manufacturing the tabletop. It is better to check the base and the top slab on the same drawing.

STL-031 under solid wood countertop

The possibility of installing a solid wood countertop is determined after checking the apron belt, holes, and permissible load.

STL-031 cannot be considered weaker just because the first dimension is 23 mm smaller. But the STL-030 approval cannot be automatically transferred to heavy slabs.

The working solution is confirmed by the manufacturer or a specialist for the specific kit.

Frame for MDF countertop

A painted MDF slab allows assembling a table in a single color with a beech frame for enamel. Thickness, edge, diameter, and fasteners must still be calculated.

MDF does not automatically mean low weight. A large circle can be heavy and create a noticeable overhang.

Before ordering, you need to check where the holes are and how the fasteners interact with the slab.

Frame for stone countertop

STL-030 is described as a model that can be used with heavy countertops, including stone and composite. This is a direction of choice, not a ready-made approval for any slab.

The stone requires precise calculation of mass, support, fastening, transportation, and tipping resistance. Drilling it on site without an agreed template is risky.

For STL-031, a stone countertop is only permissible after separate confirmation.

Frame for composite countertop

Composite materials differ in mass, thickness, and fastening method. A single category name does not provide a ready load.

STL-030 with a confirmed crosspiece can be a starting point, but the slab parameters are coordinated with the design.

For STL-031, first obtain the full drawing and only then order the countertop.

How to check the ST-030 countertop

The ST-030 card may be useful as a specific point for choosing a countertop, but compatibility with the frame should not be determined solely by matching the number.

Before ordering, it is worth view the ST-030 countertop and compare its dimensions, material, and fasteners with the selected frame.

If there is no direct confirmation of the pair in the cards, the decision is coordinated separately.

How to use the countertop category

The category helps compare the shape, size, and material of finished top parts without being limited to one option.

The customer can select a countertop for a wooden frame, then check it against DWG STL-030 or STL-031.

Commercial selection is completed only after matching the center, overhang, and fastening scheme.

Beech for white or colored enamel

A beech frame is chosen when the base needs an opaque color and to match the kitchen, chairs, or interior panels.

Enamel hides the natural pattern and emphasizes the shape of legs and aprons with light and shadow.

STL-030 with brass or steel inserts can create contrast with painted wood.

A test coat is applied before processing all parts.

Oak under tinting

Oak suits a project where the wood texture should remain visible. It pairs with an oak tabletop, doors, floor, or chairs.

The shade of the frame and tabletop does not have to be completely identical, but the difference should be intentional.

For STL-030, metal inserts are chosen together with the oak tone. For STL-031, any decorative elements are first confirmed via the card.

Beech or oak for the dining table

Beech is practical for opaque enamel and a uniform color. Oak is chosen for tinting and natural grain.

The wood species does not determine the permissible load without calculating the entire structure.

Before ordering, you can choose beech or oak and check the preparation for enamel or tinting.

The tabletop and frame must undergo an agreed finishing cycle.

How to achieve the same shade of frame and tabletop

Use samples of the same species or an approved staining system. Examine the frame and top panel together under actual lighting.

Oak parts may differ in grain even within the same batch, so absolute matching is not always the goal.

A test finish helps coordinate color, gloss, and protective coating.

How to choose brass inserts STL-030

Brass creates a warm metallic accent and can complement handles, lights, or chair details.

It should not be chosen separately from the wood color and tabletop.

Check the specific option, completeness, and appearance in the STL-030 card before ordering.

Do not assign brass inserts STL-031 without confirmation.

How to choose stainless steel inserts

Stainless steel gives a cooler and more neutral accent. It can be combined with modern fittings, kitchen appliances, and lighting.

The inserts remain a decorative element and should not be interpreted as proof of frame reinforcement.

The choice between steel and brass is related to the interior, not the intended load capacity.

How to choose metal inserts for furniture

Compare the inserts with handles, lamp bases, chairs, and other visible fittings.

Too many different metals create randomness, especially in a small dining area.

If the interior is based on wood without metal accents, specify the available version of STL-030.

For STL-031, the decorative configuration is checked separately.

STL-030 in a classic dining room

A round table with pronounced legs, an apron, and metal inserts becomes the center of the dining area.

Oak under tint supports natural furniture, beech under enamel — painted panels and doors.

Four seats are placed according to the actual template so that the legs do not interfere with seating.

A large tabletop cannot be enlarged solely for a more ceremonial appearance without calculation.

STL-031 in a restrained dining area

The model suits a buyer who needs a wooden frame of a similar size without transferring unconfirmed decorative details.

It can be used at home, in an office, cafe, or restaurant after selecting the tabletop.

The external result depends on the wood species, finish, and actual structure, which should be seen in the product card and DWG.

The table should not be evaluated solely by the 23 mm difference.

Round table frame for kitchen

In the kitchen, passages, cabinet openings, and distance to the work area are important. A round countertop reduces sharp corners but requires sufficient radius around it.

The height of the finished table is calculated taking into account the slab. Chairs should slide in without conflicting with the aprons and legs.

For a small kitchen, a full-size template on the floor is especially important.

Frame for a living-dining room

In an open space, the table can become a connecting element between the kitchen and living room. STL-030 provides a confirmed metal accent, STL-031 provides a close wooden format.

The tabletop is connected to the furniture, floor, and light fixture above the center.

The movement path around the table is checked with the chairs pulled out.

Frame for an office or meeting room

A round table is suitable for meetings and collaborative work when all participants need equal access to the center.

STL-031 is intended for home, office, cafe, or restaurant. STL-030 can also be considered after checking the size and finish.

Appliances, cables, and heavy items require a separate solution that is not included in the confirmed configuration.

Frame for a cafe or restaurant

In a commercial space, repeatability of assembly, coating durability, cleaning, and distance between tables are important.

STL-031 is directly specified for cafes and restaurants, but the permissible load and tabletop are still agreed upon.

STL-030 is interesting for its expressive design and inserts, however, one control table is assembled before the series.

For a complex area, you can order a design project for the table and dining area.

Frame for a hotel or salon

A round table can work in a lobby, room, meeting room, or waiting area.

The material and finish must withstand regular maintenance, but the specific protection system is chosen separately.

For a heavy stone slab, delivery and on-site installation are especially important.

The control sample helps confirm the height and fit.

How to choose a light fixture over a round table

The light fixture is usually aligned with the center of the tabletop, so precise centering of the frame is important already at the planning stage.

Brass or steel inserts STL-030 can be complemented with the metal of the light fixture.

The size of the light fixture should not obstruct the view or seating, but specific distances are determined by the interior design project.

For STL-031, metal accents are not intended without confirmation.

How to check the delivery route

The STL-030 frame is delivered disassembled, which simplifies carrying it in. The tabletop may be a more challenging part of delivery, especially if it is stone and large.

Before ordering, measure doors, elevator, staircase, and turns. The assembly area should allow for laying out parts and installing the top slab.

It is useful to check before placing an order Terms of payment and delivery for furniture frames.

How to accept STL-030

They check four legs, four semi-circular stretchers, the inner crosspiece, the declared connecting elements, and the selected metal inserts.

They check the wood species, preparation for finishing, and the absence of damage on contact surfaces.

The kit is accepted before painting and assembly. Missing elements cannot be replaced with random parts without approval.

How to accept STL-031

They check the article number, dimensions 1067 × 740 × 1054 mm, beech or oak, surface preparation, and actual completeness.

The stretchers, holes, connections, and delivery type are checked against the card and drawing.

If the tabletop has already been ordered, its template is matched with the frame before finishing begins.

How to perform a dry assembly of STL-030

The parts are assembled without finishing, following the confirmed connection diagram. Dowels, Spiral Lock, and wedge catches must occupy their designated positions.

After assembly, the geometry, stability on a level floor, and the position of the aprons relative to the center are checked.

Only then is the tabletop template fitted and the actual mounting points marked.

How to perform a dry assembly of STL-031

The order is determined by its card and drawing. The STL-030 scheme cannot be copied by analogy.

The assembled frame is checked for diagonals, height, and levelness of the support.

All holes and components are photographed before disassembly for finishing.

Why painting before a test assembly is risky

A thick layer of primer and enamel can change the fit of dowels, eccentrics, and metal elements.

If completeness is not checked in advance, it is more difficult to detect an error after finishing.

Dry assembly helps separate structural issues from painting issues.

How to protect joints during finishing

Contact pads, holes, and metal components must not be filled with primer and paint.

Decorative surfaces are finished evenly, and joints are protected according to the technology.

For oak under tinting, it is especially important not to create stains around fasteners.

How to assemble the frame after finishing

Parts are returned to their marked positions. Joints are tightened in the prescribed sequence without damaging the coating.

The frame is installed on a flat surface and the geometry is rechecked.

The tabletop is fastened only after confirming the center and overhang.

How to choose furniture fittings

Fasteners for the countertop, washers, bushings and other elements are selected based on the slab material and frame structure.

In the catalog you can buy fasteners for frame assembly, but specific compatibility must be confirmed.

Do not replace branded STL-030 connections with random parts based only on similar diameter.

How to choose materials for finishing

Different preparation systems are used for beech under enamel and oak under tinting.

You can buy materials for frame installation and finishing after selecting the species and finish.

A test coat is performed on a sample of the same wood.

How to check leg protection from moisture

The legs contact the floor and require regular cleaning, so the bottom ends and coating need attention.

A confirmed card does not define a universal protection composition.

The system is selected based on the room, breed, and type of finish.

How to check floor evenness

Even a properly assembled frame can wobble on an uneven surface.

First, it is checked on a reference flat surface, then at the installation site.

Serious misalignment cannot be compensated by overtightening connections.

How to check stability without made-up numbers

The calculated tabletop is installed on the assembled frame according to the approved scheme and inspected by a specialist.

The article should not specify permissible lateral force or weight without data.

Special attention is paid to large overhang, heavy stone, and uneven placement of objects.

Error: selecting only based on a 23 mm difference

A smaller first dimension does not make STL-031 weaker, and a larger one does not automatically make STL-030 stronger.

The design, joints, and fastening of the tabletop are more important than a single number.

The decision is made after comparing the DWG and the configuration.

Error: considering the finished table height to be 740 mm

740 mm is the frame height. The tabletop adds its own thickness.

Ignoring this leads to uncomfortable seating and conflict with chair armrests.

The final height is calculated before ordering the slabs

Error: not checking legroom

A beautiful tabletop does not compensate for an uncomfortable seating position.

Legs, aprons, and crossbars can intrude into the knee and foot space.

Chairs are arranged around a full-size mockup.

Mistake: choosing chairs after the table is ready

Seat height, armrests, and chair width affect the diameter and number of seats.

It is better to check the table and chairs as one set.

For a wooden group, you can Chair frame STU-005 view before approving the tabletop.

Mistake: not considering the delivery route of the tabletop

A disassembled frame may fit through the doorway, but a large round slab may not.

Stone and large diameter array are especially difficult.

Delivery, lifting, and installation location are checked before payment.

Error: painting before checking the kit

After enamel or tinting, returns and replacements are more difficult.

First, all parts, connections, and inserts are accepted.

Test assembly is mandatory to detect mismatches.

Error: mixing beech and oak

The frame and tabletop may differ by design, but random mixing of species often looks inconsistent.

For a uniform transparent finish, one species is better.

Under enamel, beech allows for a calm color without attempting to imitate oak.

Error: expecting the countertop to be included in the set

Both models are considered as separate frames, and the countertop is selected separately.

The buyer must include the top slab, fasteners, and trim in the overall budget.

The configuration is checked in the product card before ordering.

Error: confusing the frame with a different design of the under-table

An apron frame on four legs differs from a central under-table, metal base, and individual legs.

The shape of the base affects the fit, overhang, and fastening.

If a different type is needed, it is useful select a base and tabletop in the general category.

Who STL-030 is suitable for

The model is suitable for a buyer who values confirmed semi-circular aprons, an internal crossbar, Ø8 mm holes, and metal inserts.

It is interesting for an expressive round dining table and a project with a heavy tabletop after calculation.

The buyer must be prepared for assembly and separate selection of the top slab.

Who STL-030 may not suit

The model may be excessive if metal accents and a complex confirmed structure are not needed.

It does not suit a buyer who expects a ready-made table with a tabletop included without inspection.

For a small room, the dimensions and four legs need to be tried on.

Who suits STL-031

STL-031 suits those who need a wooden frame of a similar size made of beech or oak for home, office, cafe, or restaurant.

It requires careful reading of the drawing and coordination of the tabletop.

The model should not be assessed as weak or simple only because of the smaller first size.

Who STL-031 may not suit

If the buyer needs pre-confirmed Ø8 mm holes, an internal crosspiece, and a choice of brass or steel inserts, these features should be looked for in STL-030.

STL-031 should not be purchased for a heavy slab without technical confirmation.

The card and DWG should cover all questions before payment.

Practical choice: oak round tabletop

First, determine the weight, diameter, thickness, and method of attaching the oak slab.

STL-030 provides more confirmed data on aprons and holes. STL-031 requires a separate drawing.

The shade of the frame and tabletop is approved on samples.

Practical choice: white table for enamel

The beech frame can be prepared for opaque finishing and paired with a painted tabletop.

STL-030 with brass will give a warm accent, with steel — a colder one.

For STL-031, decorative inserts are not intended without confirmation.

Practical choice: table with stone slab

STL-030 is considered first due to the direct mention of heavy tabletops and crosspiece.

But the final choice depends on weight, overhang, fastening and stability.

STL-031 is allowed only after separate approval.

Practical choice: table for a cafe

Assembly repeatability, durable finish and easy cleaning are required.

STL-031 is intended for cafe and restaurant, STL-030 can be used after design verification.

Before the series, one control table is assembled and tested in a real layout.

Practical choice: table for a new apartment

At the project stage, it's easier to simultaneously select the frame, tabletop, chairs, and lamp.

The template on the floor shows the diameter and passages.

The decision on STL-030 or STL-031 is made before ordering the expensive slab.

Practical choice: replacing an old frame

The existing tabletop sets the diameter, thickness, and holes.

It cannot be automatically transferred to a new frame. First, compare the template with STL-030 and STL-031.

If the mounting does not match, choose a new tabletop or design a safe transition.

How not to confuse a frame with a finished table

The frame includes the base but does not become a finished item without a tabletop, fasteners, finishing, and assembly.

The customer must understand the full composition of the order and budget in advance.

The card for the countertop, fittings, and materials complements the main purchase but does not prove automatic compatibility.

How not to confuse STL-030 and STL-031 by size

The full article number and all three dimensions must be specified in the order.

The difference of 1090 and 1067 mm is easily lost in correspondence or estimates.

A drawing and model name are attached to the specification, especially if two different dining areas are ordered simultaneously.

How not to confuse beech and oak after priming

Before finishing, parts are marked by wood species and installation location.

Under opaque enamel, the difference may become less noticeable, but the surface properties and original order remain different.

Marking helps avoid mixing countertops, legs, and aprons from different sets.

What not to do from scratch when buying a ready-made frame

The buyer does not need to independently calculate four separate legs, bend STL-030 aprons, design their connection, and search for random decorative inserts.

The ready-made frame transfers the complex part into a documented product system. The main work focuses on choosing the tabletop, finishing, assembly, and installation.

The general route reveals material about how to choose a solid wood furniture frame.

How to prepare a technical specification for a tabletop

The document specifies the selected frame, overall dimensions, drawing, center, intended diameter, thickness, material, and fasteners.

For STL-030, mark holes Ø8 mm and the internal crosspiece. For STL-031, attach its own diagram.

The tabletop manufacturer should see not only the external size but also all connection points.

How to coordinate the table with the interior project

The frame, countertop, chairs, and lamp are checked in one layout.

A round table requires space around its entire perimeter, not just room for the slab itself.

For a complex task, you can order a design project for the table and dining area and eliminate conflicts with walkways in advance.

How to check an order before payment

They verify the article number, dimensions, beech or oak, preparation for enamel or tinting, and selected STL-030 inserts.

Separately, they check whether the fasteners are included, how STL-031 is supplied, and which countertop will be used.

No unconfirmed characteristic should remain a mere verbal assumption.

How to buy a frame on STAVROS

First, open the STL-030 and STL-031 cards, then compare the design, dimensions, and confirmed configuration.

If neither model fits, you can buy a table frame in the category and choose a different format.

After selecting the base, they move on to tabletops, chairs, hardware, and finishing materials.

How to save data for reordering

After approval, they save the article number, drawing, wood species, finish, metal insert option, tabletop size, and fastening scheme.

A photo of the assembled frame and a hole template make it easier to repair or replicate a second table.

For cafes and restaurants, such documentation is especially important.

How to care for the finished table

Care is determined by the wood's finish coating, tabletop material, and metal inserts.

Wipe the frame without abrasives and avoid prolonged wetting of joints.

Periodically check the tightening of collapsible units and the fastening of the top plate.

How to check the table after assembly

The table is installed on a level floor, checking for no wobbling, even overhang, and horizontal tabletop.

Then arrange the chairs and evaluate the seating from all four sides.

Any instability requires checking the structure, not masking with overlays.

Why STL-030 is not always automatically better

A detailed description of the structure facilitates selection, but may be excessive for a specific design or budget.

STL-031 may more accurately match the project after checking its drawing.

The comparison should meet the buyer's task, not turn into a rating based on the number of listed parts.

Why STL-031 cannot be considered simplified without evidence

The absence of details in the SEO scheme does not mean the absence of structural elements in the product itself.

The article must direct the buyer to the card and DWG, not make a negative conclusion.

Technical uncertainty is resolved by verification, not assumption.

What to buy together with the round table frame

The frame is the central part of the project, but not a complete table. The buyer will need a separately selected tabletop, compatible fasteners, finishing materials, and chairs. For complex stone or composite slabs, technical calculation and professional assembly may be required.

All additional pages below are taken from the confirmed scheme. They help transition from comparing two bases to a kit, without creating the false impression that the tabletop or hardware is automatically included in the delivery.

Practical choice: frame for an existing round tabletop

First, measure the exact diameter, thickness, weight, and position of the old holes. Then apply templates STL-030 and STL-031.

If the fasteners do not match, do not drill new points without checking the material and structure.

Sometimes it is safer to order a new countertop than to adjust an expensive frame to an unknown slab.

Practical choice: table matching the kitchen color

A beech frame under enamel helps tie the table to painted facades.

For STL-030, coordinate metal inserts with handles and appliances.

The countertop may match the kitchen or create a separate material, but its fastening and weight are checked regardless of color.

Practical choice: natural oak table

An oak frame under tinting supports visible wood texture.

If the countertop is also oak, lay out samples side by side and coordinate the shade.

STL-030 allows adding brass or steel, STL-031 is considered based on its actual configuration.

Practical choice: four seats in a small room

On the floor, lay out a circle of the intended diameter, place four chairs, and check the passages.

The first frame dimension does not replace the outer size of the tabletop.

If the chairs collide with legs or walls, change the diameter, model, or layout.

Practical choice: table for a daily family

Comfortable seating, durable coating, ease of cleaning, and clear tabletop attachment are important.

STL-030 provides detailed structural information, STL-031 requires obtaining it before ordering.

The material is chosen based on the desired finish and compatibility with the rest of the furniture.

Practical choice: expressive table for a guest area

STL-030 with metal inserts is suitable for a project where the base should be a prominent part of the design.

A heavy or large tabletop is still verified by calculation.

STL-031 can provide a calmer wooden look after refining the structure and finish.

What to clarify with the manager regarding STL-030

Check the current configuration, selected inserts, delivery type, material, surface preparation, and tabletop fasteners.

Separately agree on the parameters of the intended slab and the need for additional calculation.

It is better to record all answers before manufacturing the tabletop.

What to clarify with the manager regarding STL-031

A drawing of the apron frame, information about connections, holes, delivery, and permissible tabletop parameters are needed.

If stone or solid wood is planned, this must be reported immediately.

Thus, the model is evaluated based on facts, not by comparison with STL-030.

How to compare two frames on one sheet

Print or overlay two drawings at the same scale.

Mark the outer contour, legs, stretchers, attachment points, and center.

The 23 mm difference will only become clear in relation to the actual geometry, not as a standalone number.

How to approve a control table before a series

For a cafe, restaurant, or several identical rooms, first assemble one unit.

On it, check the tabletop, fit, stability, finish, and maintenance.

After approval, record the article number, drawing, fasteners, and painting system for the remaining tables.

How to check the frame for a specific tabletop before purchase

It is useful for the buyer to start not with choosing a color, but with a complete technical sheet of the countertop: external dimensions, thickness, weight, material, location of embedded parts, and permissible drilling method.

After that, the parameters are applied to drawing STL-030 or STL-031. They check where the stretchers run, whether there is space for fasteners, and whether the holes fall into the edge of the slab.

If the countertop has not yet been manufactured, it is easier to adapt it to the frame. If it already exists, the base is selected much more strictly.

How to check the overhang when arranging chairs

The overhang is assessed not only from above, but also in an actual seating position. The chair is moved up to the template, a person sits down and checks the position of the knees relative to the stretchers and legs.

A large overhang can provide more knee room but increases leverage. A small overhang brings the person closer to the frame and can make the seating cramped.

Therefore, comfort and stability calculations should confirm the same solution.

How to coordinate the table with the floor covering

The frame is installed on the finished floor, so it is necessary to consider evenness, hardness, and the possibility of regular movement of chairs.

Protective elements on the legs and the care method are checked separately, as they are not confirmed in the original scheme.

Tinted oak or painted beech are chosen so that the table does not accidentally blend with the floor or create unnecessary contrast.

How to plan a table in the center of the room

A round table requires clearance around its entire perimeter. The plan should mark not only the tabletop but also the chairs in their working position.

STL-030 and STL-031 are similar in dimensions, so the 23 mm difference rarely determines the layout on its own. The outer diameter of the top plate is much more important.

The lamp, rug, and outlets are aligned with the central axis of the finished table.

How to plan a table by a wall or window

A round tabletop can be used not only in the center but also closer to the wall. In this case, some seats become less convenient, and the overhang and legs need to be checked especially carefully.

The table should not block the radiator, curtains, or window opening. A heavy structure should not be constantly moved without considering the floor and tabletop fastening.

A full-size circle on the floor helps evaluate the real scenario before purchase.

How to compare the budget of two models

Comparing frame prices does not reflect the full budget. STL-030 may require selected metal inserts and specific assembly, STL-031 — additional clarification of completeness.

The final cost includes the tabletop, fasteners, finishing, delivery, and the master's work.

It is more rational to compare two fully assembled projects, rather than just the base prices of the frames.

How to prepare a specification for the workshop

The specification records the frame article number, overall dimensions, material, finish, tabletop, its weight and size, fasteners, chairs, and installation location.

For STL-030, specify brass or stainless steel separately. For STL-031, attach confirmed completeness.

This way, the workshop does not transfer details from one model to another and does not make decisions from memory.

Final check before ordering

Make sure that STL-030 or STL-031 is selected, not just a frame of a similar size. Check the wood species, finish, drawing, tabletop, and final height.

Separately confirm the fasteners, overhang, stability, and delivery route. Only after this, the frame, tabletop, and chairs are combined into one order.

This sequence protects the project from the most expensive mistake — manufacturing an unsuitable top plate.

Why it's useful to order finish samples before manufacturing the countertop

The frame color influences the choice of top plate, chairs, and metal accents. A sample of beech for enamel or oak for tinting allows you to see the actual shade next to the countertop material.

For STL-030, brass and steel inserts are evaluated simultaneously. For STL-031, the actual configuration is confirmed first. After the sample is approved, the workshop receives precise instructions, and the risk of discrepancies between the frame and countertop is reduced.

How to check the final set of documents

Before payment, save the selected frame card, DWG, countertop specification, fastener list, and approved finish sample. All documents must refer to the same article and the same order version.

If an unconfirmed characteristic remains in the correspondence, it must be clarified before the countertop goes into production. This is especially important for STL-031 and for heavy slabs.

FAQ: questions about STL-030 and STL-031

How is STL-030 different from STL-031?

STL-030 has confirmed semi-circular aprons, an internal crossbar, Ø8 mm holes, and metal inserts. For STL-031, these elements need to be checked separately.

Why do the dimensions differ by 23 mm?

The first dimension STL-030 is 1090 mm, STL-031 is 1067 mm. The difference itself does not explain the design and does not determine strength.

Are the frame heights the same?

Yes, both frames have a height of 740 mm.

What will be the final table height?

Add the tabletop thickness and the provided mounting layer to 740 mm.

Can one tabletop be used on both frames?

Only after comparing drawings, holes, center, and allowable overhang.

What tabletop diameter should be chosen?

The diameter is calculated based on the frame contour, overhang, number of seats, material, and stability.

Is STL-030 suitable for a stone countertop?

The card allows heavy countertops, but a specific stone slab requires calculation of weight, overhang, and fastening.

Can stone be placed on STL-031?

Only after separate technical confirmation.

Why does STL-030 have an internal cross brace?

It is part of the confirmed design and ties the internal frame together, but does not provide a ready load rating.

What are the aprons of STL-030?

Four semi-circular aprons made of bent laminated plywood 24 mm thick with beech or oak veneer.

Does STL-031 have the same aprons?

This cannot be stated without its card and drawing.

How is the tabletop attached to the STL-030?

Each crossbar has two through holes Ø8 mm. The specific fasteners are selected based on the tabletop.

Is the tabletop included in the set?

No, according to the diagram, it is selected separately for both models.

In what form is the STL-030 supplied?

Disassembled.

How is the STL-031 supplied?

The current delivery form should be checked in the product card.

What is Spiral Lock?

These are confirmed eccentrics in the STL-030 connection system.

What inserts does STL-030 have?

Stainless steel or brass.

Are there metal inserts in STL-031?

They are not confirmed in the original design.

What to choose for white enamel?

Beech

What should I choose for natural tinting?

Oak.

Can an oval tabletop be used?

Only by separate project with overhang and stability check.

How many seats is STL-030 designed for?

The card indicates the model is for about four seats, but seating should be checked with chairs.

Is STL-031 suitable for a cafe?

Yes, this purpose is confirmed, but the tabletop and load are agreed separately.

Do I need to assemble the frame before painting?

Yes, dry assembly helps check completeness and geometry.

Where to buy STL-030?

In the STL-030 frame card on the STAVROS website.

Where to buy STL-031?

In the STL-031 frame card on the STAVROS website.

What should be checked before ordering?

Article, dimensions, wood species, finish, configuration, drawing, tabletop, overhang, fasteners, height, and delivery.

Result: STL-030 or STL-031

STL-030 is chosen when the buyer needs confirmed semi-circular aprons, an internal cross brace, Ø8 mm holes, collapsible connections, and decorative inserts made of brass or stainless steel. The model is suitable for a round dining table and can be considered for a heavy tabletop, but its weight, diameter, overhang, and fastening still require calculation.

STL-031 is suitable for a project with a wooden frame measuring 1067 × 740 × 1054 mm made of beech or oak. It should not be considered weaker due to the 23 mm difference and should not inherit STL-030 characteristics by analogy. The card and DWG must confirm the aprons, holes, connections, delivery, and permissible tabletop parameters.

Both models have a height of 740 mm, so the final height is calculated together with the tabletop and chairs. Beech is chosen for enamel, oak for tinting. The tabletop, fasteners, and finishing materials are selected separately, and a test assembly is performed before painting.

On the STAVROS website, you can open both cards, compare the frame category, and select the tabletop, chairs, and hardware. This approach allows you to assemble a table based on a confirmed design, rather than making a decision based solely on similar dimensions.