Partition kit KON-005

The KON-005 partition set is a collection of wooden elements for assembling one decorative post 2800 mm high. The product is used to create interior partitions, zoning a room, living room, hallway, kitchen-living room, studio, or commercial space. The post is assembled from wooden molding MLD-060 and turned geometric elements KN-005, KN-006, KN-007, KN-008, and KN-009, made from solid beech wood. One KON-005 set is one vertical decorative post 2800 mm high. To create a full decorative wooden partition, several sets are used — their number is determined by the width of the opening and the selected spacing between posts.
The main feature of KON-005 in the STAVROS constructor line is the expressive geometry of the decorative elements. Unlike the KON-001–KON-004 posts, which use predominantly rounded spherical parts, KON-005 includes elements of fundamentally different shapes: an elongated diamond-shaped KN-008, a flat disc-shaped KN-007, small round KN-005 and KN-006, as well as miniature KN-009. This combination creates a complex multi-level decorative rhythm, alternating elongated vertical accents and horizontal dividers — the post looks architecturally rich and visually opulent. A wooden decorative partition for zoning made from KON-005 posts fits organically into modern, neoclassical, and designer interiors where detail expressiveness is valued.
The price on the website is for one KON-005 post set, not for the entire partition shown in the interior visualization. The cost of a full wooden partition is calculated based on the number of required sets. All wooden constructor elements — moldings, geometric shapes, and related parts — are presented in the constructor section on the STAVROS website.

Specifications of the KON-005 set

The height of the assembled post is 2800 mm, the maximum width of the decorative element is 120 mm, and the diameter of the molding's supporting rod is 34 mm. The KON-005 set occupies an intermediate position in profile width in the series: 120 mm is noticeably wider than the compact KON-004 (88 mm), but smaller than the large KON-002 and KON-003 with 170 mm elements. The wooden partition dimensions 2800 × 120 × 34 mm represent a balance between expressiveness and lightness: the post is wide enough to create a full decorative accent, yet compact enough not to weigh down the space.
The "Prestige" sanding quality means multi-stage finishing with sequential reduction of abrasive grit — resulting in a perfectly smooth surface ready for final coating straight from production. The "Under enamel" gluing quality ensures even, invisible joints between all parts of the set: the decorative wooden partition, whose dimensions and surfaces are prepared at the factory, does not require additional puttying before painting.

Material of the KON-005 kit

The KON-005 kit is made from solid beech wood. Beech is one of the most sought-after species for producing turned decorative items: a dense (about 720 kg/m³), homogeneous wood with fine straight grain and an almost invisible natural pattern. These characteristics make beech an ideal material for parts with complex turned shapes — it maintains profile sharpness, does not split during turning, and ensures flawless geometry of KN-008, KN-007, and other parts with pronounced edges and transitions.
Beech is well-suited for sanding, turned decorative elements, and subsequent enamel painting. The beech surface accepts coating evenly, without showing fiber texture — the KON-005 stand under white or colored enamel looks like a sculptural piece with clear geometric shapes. If an oak option appears in the card, the decorative partition stand made of oak will offer expressive natural texture under transparent coatings — for interiors where material naturalness is important. All turned solid wood elements of the KN series are produced on the same equipment and from the same species as other products of the STAVROS line.

What is included in the KON-005 partition kit

The KON-005 kit contains the most diverse set of shapes geometric wooden figures among all stands in the series. Five types of turned elements with fundamentally different geometric characteristics create a complex decorative rhythm that distinguishes KON-005 from other kits in the KON series.

The KON-005 set includes elements of different shapes and sizes — each plays its role in the overall decorative composition of the stand.
Geometric figure KN-008 is a key element that defines the character of the KON-005 stand. A height of 150 mm with a width of 96 mm creates an elongated diamond or spindle-shaped profile. Three KN-008 elements arranged along the height of the stand form powerful vertical accents — they create a sense of upward thrust and give the stand a dynamic, directional character. It is KN-008 that makes the silhouette of KON-005 fundamentally different from stands with round spherical parts.
Geometric figure KN-007 is a flattened disc element with a height of 44 mm and a width of 120 mm. Three KN-007 elements act as horizontal dividers between the large vertical accents of KN-008: they create pauses in the rhythm of the stand and emphasize its structure. The combination of vertically elongated KN-008 and horizontal disc KN-007 is a decorative contrast that makes the silhouette of the stand particularly rich.
Geometric figure KN-006 is a medium rounded element with a diameter of 72 mm and a height of 90 mm. Two KN-006 elements provide smooth transitions between zones of different scales, softening contrasts and giving the stand coherence. Geometric figure KN-005 is a small rounded element with a diameter of 76 mm and a height of 66 mm. Three KN-005 elements add a fine accent rhythm in the lower and upper parts of the stand. Geometric figure KN-009 is a miniature element with a diameter of 62 mm and a height of only 22 mm, the most compact in the set. Five KN-009 elements are distributed along the height of the stand and create small dividing accents — a fine decorative dotted line that connects all the large elements into a single composition.
Molding MLD-060 with a length of 2400 mm is the main load-bearing axis of the stand, the molding with a length of 1000 mm completes the structure from the bottom or top depending on the installation scheme. Full catalog of wooden moldings for assembling stands is available in the constructor section on the STAVROS website.

Where to use the KON-005 partition kit

Kitchen-living room. A wooden partition for zoning a kitchen-living room made of KON-005 posts is an expressive solution for open-plan layouts. The average profile width of 120 mm provides sufficient decorative effect without visually overloading the space. A wooden partition for zoning a room in a kitchen-living room format made of beech with enamel in the color of the kitchen set or furniture is a way to create a unified style solution where the partition is an extension of the furniture ensemble.
Living room. A wooden decorative partition for zoning a living room made of KON-005 posts separates the relaxation area, workspace, or TV zone. The expressive silhouette of the post with diamond-shaped KN-008 elements creates an accent decorative object — buying a wooden partition for the living room in the KON-005 variant means getting not just a zoning structure but also an independent interior statement.
Hallway. A decorative wooden partition between the hallway and the living area made of KON-005 posts creates an expressive first impression of the interior. The geometrically rich silhouette of the post with alternating elongated and flat elements is well readable in the passage and attracts the eye. Buying a wooden partition for the room in the hallway in the KON-005 variant is a choice for those who want a non-standard decorative solution.
Прихожая. Декоративная деревянная перегородка между прихожей и жилой зоной из стоек KON-005 создаёт выразительное первое впечатление об интерьере. Геометрически богатый силуэт стойки с чередованием вытянутых и плоских элементов хорошо читается на проходе и привлекает взгляд. Деревянная перегородка в комнату купить для прихожей в варианте KON-005 — это выбор для тех, кто хочет нестандартного декоративного решения.
Studio. A wooden partition for zoning a room in a studio made of KON-005 posts allows you to highlight a sleeping area, workspace, or dressing room without major construction. Buying a wooden partition for zoning a room in a studio is a particularly relevant request, which KON-005 answers with character: posts with geometric elements visually structure the space more vividly than simple slatted structures.
Bedroom. Decorative zoning of a bedroom using a wooden partition made of KON-005 posts — separation of the sleeping area and dressing room, workspace, or relaxation area. A decorative wooden partition for zoning a bedroom creates privacy without physical closure, maintaining visual and light connection between zones.
Opening design. Buying a decorative wooden partition for installation in an opening — several KON-005 posts built into a door or arch opening turn it into an architectural accent. Diamond-shaped KN-008 elements in the opening create a sculptural, jewelry-like effect.
Commercial interiors. A wooden decorative partition in the interior of a cafe, restaurant, beauty salon, showroom, or apartment made of KON-005 posts creates stylistic certainty and expressive zoning. The geometrically complex silhouette of the post adds uniqueness and an authorial character to the commercial space.

Advantages of the decorative post KON-005

The KON-005 set is an interior product where decorative expressiveness and unconventional geometry are valued. Wooden parts for partitions made from natural beech, turned to millimeter precision, create a stand with a rich multi-level rhythm that favorably distinguishes KON-005 from uniform decorative structures.
Natural beech. Beech wood is a dense, environmentally friendly species with a long service life. Buying a wooden partition made of natural solid wood is a choice in favor of a material that does not age, does not deform, and maintains the geometric precision of decorative details for decades.
Expressive geometry of decorative elements. Five types of turned parts with fundamentally different proportions — from the elongated KN-008 to the miniature KN-009 — create a decorative rhythm unparalleled in other KON series sets. A partition stand with geometric elements of different shapes is perceived as a sculptural object, not just a structural detail. A decorative wooden partition for zoning made from such stands is an original designer solution, not a standard structure.
Height 2800 mm — from floor to ceiling. Full-height vertical stands provide architecturally convincing division of zones across the entire height of the room. A decorative wooden partition for zoning with a height of 2800 mm visually raises the ceiling due to vertical lines and creates a feeling of more space.
Prepared for enamel. The decorative partition stand for enamel from the KON-005 set accepts any paint coating without additional finishing. Diamond-shaped and disc elements with clear geometric edges under white enamel look like a product made of plaster or faience — laconic, precise, and expensive.
Can be painted to match the color of walls, furniture, or accent decor. The ability to paint in any color according to the RAL catalog makes KON-005 fully adaptable to any color scheme. White stands in a white interior create a delicate texture; contrasting stands create an accent. A decorative wooden partition for zoning painted to match the color of furniture or an accent interior detail creates a unified stylistic ensemble.
Suitable for modern, neoclassical, and designer interiors. The geometrically expressive character of KON-005 makes it appropriate in a wide stylistic range. Buying a decorative wooden partition for a modern interior, neoclassical, or original designer project — KON-005 is equally convincing in each of these contexts.
From several sets — a partition of the required width. A wooden partition for zoning a room of any format is assembled from the necessary number of KON-005 sets. The width of the structure is entirely determined by the parameters of the opening and the designer's brief.

How many KON-005 kits are needed for a partition

One KON-005 kit is one vertical decorative post. For a full wooden zoning partition, several kits are needed. The quantity depends on the width of the opening, the spacing between posts, and the design solution.
For KON-005 with a 120 mm profile, the recommended spacing range is: small spacing (200–300 mm) creates a dense structure with a high degree of visual closure — with this spacing, the decorative wooden partition looks almost like a solid decorative wall with geometric accents. Medium spacing (350–500 mm) provides an optimal balance between zoning and a sense of openness. Large spacing (550–700 mm) forms a light, rhythmic structure that symbolically defines zones while preserving maximum air and light. A decorative wooden zoning partition with large spacing using KON-005 posts is especially good in spacious living rooms and studios.
Calculation examples:

• Opening 700 mm, spacing 350 mm → 2 KON-005 kits

• Opening 1000 mm, spacing 330 mm → 3 KON-005 kits

• Opening 1400 mm, spacing 350 mm → 4 KON-005 kits

• Opening 2000 mm, spacing 400 mm → 5 KON-005 kits

• Opening 2500 mm, spacing 420 mm → 6 KON-005 kits

• Opening 3000 mm, spacing 500 mm → 6 KON-005 kits

Before placing an order, it is necessary to accurately measure the width and height of the opening, determine the spacing between posts, and the method of attachment to the floor and ceiling. STAVROS specialists are ready to help with the configuration calculation — contact a manager for a consultation.

Important: the price is for one set of KON-005 stand, not for the entire partition in the interior visualization. The total cost of the partition = price of one set × number of stands.

What the assembled KON-005 stand looks like

The assembled KON-005 stand is a vertical structure 2800 mm high with a multi-level geometric pattern. On the central axis made of MLD-060 moldings (2400 mm + 1000 mm), there are 19 turned elements of five types: 3 pieces of KN-008, 3 pieces of KN-007, 3 pieces of KN-005, 2 pieces of KN-006, and 5 pieces of KN-009.
The rhythm of the stand is built on the principle of alternating shapes: an elongated vertical KN-008 (150 mm high) is replaced by a horizontal disc KN-007 (120 mm wide, only 44 mm high), followed by transitional elements KN-005 and KN-006, and between all large parts — miniature separating KN-009 (22 mm). This principle of alternating different geometric forms — vertical, horizontal, rounded, and compact — creates a decorative narrative in which the stand reads as a single sculptural object, rather than a set of independent parts.
The visual image of KON-005 is unique among all sets in the series: there is no dominance of one form, but a dialogue of forms. A wooden decorative partition in the interior made of several KON-005 stands arranged in a row creates a rhythmic installation with a repeating complex motif — architecturally expressive and visually rich. With side lighting, the diamond-shaped KN-008 elements produce pronounced shadows and highlights, enhancing the plastic effect.

Style compatibility of KON-005

The KON-005 decorative stand, with its geometrically diverse elements, adapts to a wide range of interior styles.
Modern and designer style. In interiors with non-standard design solutions, designer furniture, and an emphasis on the uniqueness of details, the KON-005 stand is an organic addition. A decorative wooden partition for zoning made of KON-005 stands with matte white enamel in a modern space looks like a sculptural art object.
Neoclassicism. Turned wooden elements with pronounced geometry refer to architectural details of the classical tradition — turned balusters, column fragments, elements of stucco decor. Buying a decorative wooden partition for a neoclassical interior in the KON-005 version is a choice for those who want a classical form with a non-standard rhythmic presentation. Additional Carved wooden decoration STAVROS — cornices, pilasters, rosettes — organically complements the KON-005 stands into a single architectural ensemble.
Art Deco. Geometric expressiveness KON-005 — a direct intersection with the decorative language of Art Deco. Elongated diamond-shaped KN-008 and horizontal discs KN-007 are typical motifs of the style. A wooden decorative partition in an Art Deco interior made of KON-005 posts in dark lacquer, gold tinting, or graphite enamel creates a precise stylistic match.
Eco and natural interiors. A wooden decorative partition for zoning made of beech under clear oil or lacquer in an interior with natural textiles and live plants adds natural warmth and organic feel. The geometric shapes of turned elements against a beige-white wall create a calm, natural, yet architecturally expressive image.

Buy decorative wooden partition KON-005

At STAVROS, you can order a KON-005 partition kit made of beech for interior zoning. The kit is designed to assemble one decorative post 2800 mm high. From several posts, you can create a wooden partition for a room, kitchen-living room, hallway, studio, or commercial space. Buying a wooden partition at STAVROS means getting a Russian-made product from solid beech with "Prestige" quality sanding and preparation for enamel.
The price of a wooden partition is calculated based on the number of required KON-005 kits. Buy a decorative wooden partition for one opening or for a large-scale project with several zones — STAVROS managers will calculate the full configuration considering your parameters. Buy a wooden partition with delivery throughout Russia via the CDEK transport company — the product is packaged at the factory and delivered to any region. Production time is 5–10 business days from order confirmation. Additional Elements for decorative stands — moldings, geometric shapes, and components — are available in the STAVROS constructor section.
Before placing an order, we recommend:

• Measure the width and height of the opening with an accuracy of 5 mm

• Determine the desired spacing between posts and calculate the number of KON-005 kits

• Choose the finish: enamel, tinting, clear lacquer, or oil

• Specify the method of attaching the posts to the floor and ceiling

• If necessary, consult with a manager about post placement

Frequently asked questions

Is one KON-005 kit the entire partition?
No. One KON-005 set is one decorative post 2800 mm high. For a full wooden partition for zoning, several sets are needed. The quantity depends on the width of the opening and the selected spacing between posts.
What material is KON-005 made of?
According to the provided specifications, the KON-005 set is made of natural beech wood — a dense species with a uniform structure, ideal for turned elements and subsequent enamel painting. If an oak option appears in the product card, an oak version can be ordered for interiors with a pronounced natural texture.
Can KON-005 be painted?
Yes. The "Under enamel" gluing quality prepares surfaces and joints for applying paint coating. The decorative partition post under enamel accepts any color from the RAL catalog without additional puttying or joint finishing.
How does KON-005 differ from other sets in the KON series?
The main difference of KON-005 is the expressive geometry of its elements. The set includes turned parts of five fundamentally different shapes and sizes: elongated diamond-shaped KN-008, flat disc-shaped KN-007, small rounded KN-005 and KN-006, and miniature KN-009. This combination creates a unique decorative rhythm not found in other sets of the series.
Where is the KON-005 post used?
In living rooms, kitchen-living rooms, hallways, studios, bedrooms, dining areas, when designing openings, as well as in commercial interiors — cafes, restaurants, showrooms, salons, meeting rooms, and apartments.
How to calculate the number of kits?
You need to measure the width of the opening and select the spacing between posts. One KON-005 set equals one post. Divide the opening width by the spacing to get an approximate number of sets. For an accurate calculation, contact a STAVROS manager.
What is the production time for KON-005?
The average production time is 5–10 business days from order confirmation. Delivery across Russia is carried out by the transport company CDEK.
Where can I see all elements and kits of the KON series?
All beech and oak accessories — MLD-060 moldings, KN-series geometric shapes, and ready-made KON kits are presented in the STAVROS wooden element constructor section at https://www.stavros.ru/products/izdeliya-iz-massiva/konstruktor/.