Geometric figure KN-018

Geometric shape KN-018 is a large rounded element made of natural solid wood for assembling decorative partitions, spatial shelving, furniture posts, and custom interior structures. The part size is 104 × 104 × 109 mm, with a mounting hole size of 34 mm. You can choose beech or oak for manufacturing, and the "Prestige" sanding quality allows the product to be used as a base for subsequent finishing according to the interior project.

In shape, KN-018 is perceived as a neat wooden sphere with prepared mounting holes. This is its main difference from a regular decorative wooden sphere: the product is intended not only for decoration but also for inclusion in a modular system of posts, axes, and other geometric parts. Straight elements can approach the sphere from different sides, and the shape itself becomes an expressive structural node.

KN-018 is part of the STAVROS wooden construction set, where individual solid wood elements can be combined with each other to create your own pattern for a partition, shelf, or furniture post. This approach allows you to move away from a uniform structure of simple slats and assemble a more complex composition of spheres, cubes, elongated shapes, and smooth wooden axes.

Wooden sphere KN-018 for an interior partition

One of the most expressive applications of KN-018 is a decorative wooden partition. Such a structure allows you to divide a room into functional zones while preserving light, perspective, and a sense of open space.

If a partition consists only of vertical wooden posts, it looks strict and minimalist. For a minimalist interior, this is sometimes enough. But when the structure needs to become an independent part of the design, large geometric shapes help create a more interesting pattern.

KN-018 is well suited for this task thanks to its soft spherical shape. The round element contrasts with the long straight lines of the posts and visually softens the structure. Even a single shape can change the character of an individual vertical, while several elements allow you to build a full decorative rhythm.

Wooden balls can be placed at the same height if strict symmetry is required. For a modern interior, a free composition works more interestingly: one KN-018 is located closer to the top of the stand, another in the center, and a third lower. Between them, you can use geometric elements of a different shape or leave some of the verticals smooth.

This principle helps create a partition that does not look mass-produced. While maintaining the same materials and mounting dimensions, each stand can have its own pattern, and the entire system remains visually cohesive.

For zoning a kitchen-living room, bedroom, and home office

KN-018 can be used in partitions for different types of rooms.

In a kitchen-living room, a wooden structure allows you to mark the boundary between the working and lounge areas without blocking the view. The geometric balls add decorativeness to the partition and help connect it with furniture, wooden flooring, or other interior elements.

In a bedroom, such a system can separate a walk-in closet, a workspace, or a small relaxation area. Thanks to the open structure, the room does not become visually smaller.

In a home office, a partition made of wooden stands can separate the work area from the library or meeting zone.

In a spacious hallway, the structure is suitable for softly dividing the entry area and the living space.

KN-018 can also be used in restaurants, hotels, salons, showrooms, offices, and other public interiors. Natural solid wood pairs well with stone, metal, glass, plaster, and textiles, so a wooden partition easily fits into various stylistic solutions.

If you need to buy wooden elements for a partition, it is reasonable to select KN-018 together with other parts constructor from solid wood. Then you can pre-arrange the pattern of the entire structure and select parts in a single style.

KN-018 for an open shelving unit

Another suitable application is an open wooden shelving unit.

In a standard storage system, the main elements are vertical posts and horizontal shelves. Such a structure is functional, but at great height and width it can look too monotonous. KN-018 allows turning a straight grid into a more expressive interior object.

A large wooden ball can be placed between shelves, above the top level, or at the bottom of a separate post. On adjacent verticals, you can use cubes, cone elements, or smaller shapes.

The result is a composition where the decorative pattern is distributed across the entire height of the shelving unit.

This approach is especially interesting for floor-to-ceiling structures. A large surface requires several points for the eye to catch. Thanks to its size of about 10 cm, KN-018 remains noticeable even among long vertical posts and wide horizontal shelves.

In a living room, such a shelving unit can be used for books, ceramics, vases, small sculptures, and collection items. In a study, for a library. In a commercial space, for displaying goods or decorative wall design.

At the same time, the storage system itself becomes part of the room's design.

Wooden ball with 34 mm holes

The 34 mm mounting size is an important parameter of KN-018. It must be considered when selecting mating elements and designing the overall structure.

Unlike a regular decorative ball without prepared mounting points, KN-018 is designed to work within a system. The holes allow wooden axes to be included in the composition and create connections in the intended directions.

This is especially convenient for an open shelf or spatial partition, where a vertical line is complemented by horizontal elements.

In this case, the ball itself visually decorates the intersection point. Instead of leaving a technically obvious joint of several wooden parts, it can be made part of the design.

Before final assembly, it is advisable to determine in advance:

• location of vertical posts;

• height of decorative elements;

• position of horizontal parts;

• number of large balls;

• distance between adjacent figures;

• sequence of elements on each rack.

For a complex project, it is convenient to first make a diagram or preliminary layout. This allows you to evaluate the overall pattern before final fixation of the parts.

Natural solid wood instead of wood imitation

KN-018 is made from natural solid beech or oak. For a large rounded figure, the choice of material is especially noticeable: the spherical surface shows the grain pattern well, and soft light transitions emphasize the natural structure of the wood.

Unlike plastic or composite imitation, solid wood remains a genuine wooden element and combines well with furniture, parquet, veneered surfaces, and other natural materials.

This is important in projects where a partition or shelving unit should be perceived not as a temporary decorative object, but as a full-fledged part of the interior.

Natural wood also offers wide finishing possibilities. The figure can be left as close to the natural shade as possible, tinted, its texture emphasized with a transparent coating, or included in the overall color concept of the furniture.

KN-018 made of solid beech

Beech KN-018 is suitable for projects requiring a calm texture and clean geometry.

Beech has a fairly uniform grain, so it does not distract attention from the shape of the ball. This is especially convenient in compositions where many different shapes are used and the overall rhythm matters, rather than the active texture of each individual detail.

Light natural beech looks good in modern interiors, minimalism, Scandinavian style, and calm contemporary classics.

It can be combined with light wood, white or gray walls, natural textiles, glass, and matte metal.

Beech KN-018 is especially successful for a large decorative partition if the task is to maintain visual lightness. Light wood and rounded elements do not weigh down the structure, even when it occupies a significant area of the wall.

Beech is also suitable for subsequent decorative finishing. If all elements of a shelving unit or partition must receive a uniform shade, the calm natural structure of the material helps preserve a clean overall pattern.

KN-018 made of solid oak

The oak geometric shape KN-018 looks more textured.

The pronounced natural grain of oak is well displayed on the rounded surface. The fibers run across the sphere, change direction along with its geometry, and further emphasize the volume of the product.

This option is especially appropriate if natural wood should be a noticeable part of the interior.

Oak KN-018 can be combined with oak parquet, veneer, solid wood furniture, doors, or wall panels. In this case, the shelving unit or partition becomes a continuation of the overall material concept of the room.

Oak works well next to stone and metal. This combination suits a modern interior where natural materials are used in laconic forms.

With a transparent or semi-transparent finish, the texture remains visible, so a simple sphere becomes a fairly expressive decorative element even without carving or additional ornament.

If you need to order an oak wooden sphere for a partition or furniture stand, KN-018 allows you to work immediately with ready-made geometry and a clear mounting size.

How KN-018 differs from a regular wooden sphere

A regular wooden sphere is most often a blank or a standalone decorative item. To incorporate it into a complex structure, you need to separately calculate and make mounting holes.

KN-018 is initially designed for use in a wooden construction system.

This provides several practical advantages.

First, the exact dimensions of the product are known — 104 × 104 × 109 mm.

Second, the mounting size is known — 34 mm.

Third, the piece can be matched with other compatible elements of the same system.

Fourthly, the designer or furniture maker understands the real proportions of the part in advance and can include them in the project.

Therefore, KN-018 is not just a decorative wooden sphere, but a ready-made module for interior or furniture construction.

For designer furniture stands

KN-018 can also be used in furniture stands.

A straight wooden support becomes significantly more expressive if one large geometric element is incorporated into it. This technique allows for a distinctive furniture piece without complex carving.

The sphere can be used in the support of a console, open shelving unit, bookcase, decorative stand, or custom furniture piece.

If the project requires several identical elements, KN-018 is convenient to repeat. The standard size helps maintain the overall proportions of all stands.

In another situation, the shape can be combined with various geometric modules to assemble several different but related supports. This option suits furniture where slight asymmetry is intentionally used.

Ready STAVROS construction kit elements allow the selection of several shapes and the construction of a custom sequence.

Combination of KN-018 with cubic elements

The round KN-018 works especially well with wooden cubes.

Here, a simple geometric contrast is at play. The sphere has a soft surface without pronounced facets, while the cube is built on straight planes and angles.

If you place these elements on adjacent vertical posts, the composition immediately becomes more complex.

For example, on the first post you can use KN-018 at the top, on the second place a cube in the center, on the third position an elongated shape, and leave the fourth almost smooth.

Repeating this sequence can produce an organized pattern for a wide partition.

Another option is to place the sphere and cube on the same axis but separate them with a long section of smooth post. The contrast of forms will remain noticeable, but the structure won't be overloaded.

Combining with cones and elongated shapes

Conical and diamond-shaped elements complement the spherical form well.

KN-018 creates a calm rounded volume, while the elongated shape emphasizes the direction of the post. Alternating these details brings out a pronounced vertical rhythm.

This is especially useful for tall structures. Large spheres create key focal points, while elongated elements connect them together.

If all parts are made equally massive, the partition may look heavy. Therefore, between large elements it is desirable to use small shapes and fairly long smooth sections.

This keeps the composition airy.

Shelving-partition with KN-018

An interesting solution is a structure that simultaneously works as a shelving unit and a partition.

Vertical posts form the base, horizontal shelves connect them, and KN-018 and other geometric parts create a decorative pattern.

Such an item can stand near a wall or partially divide a room.

The advantage of this solution is that decorative elements are not added on top of finished furniture, but immediately become part of its architecture.

A sphere can be placed between two shelf levels. If the position is repeated on another post with a vertical offset, a diagonal movement appears.

In a large structure, you can use several KN-018 and connect them through a common rhythm of shelves and posts.

Such a shelving unit is well suited for modern interiors where furniture must serve a practical function and simultaneously work as a decorative object.

Size 104 × 104 × 109 mm in the interior

KN-018 should not be perceived as a small decorative bead. It is a fairly large figure.

Dimensions:

A — 104 mm
B — 104 mm
C — 109 mm
D — 34 mm.

The overall size of about 10 cm allows the ball to remain noticeable even inside a tall partition or a large shelving unit.

Before designing, it is important to consider the actual size of the part. If the posts are placed close to each other, using large balls too frequently can make the structure visually dense.

In a large system, this same size becomes an advantage. Small decorative elements could get lost, whereas KN-018 is easily readable from a distance.

Therefore, the number of balls should be selected taking into account the scale of the entire structure.

How to distribute several KN-018

It is not necessary to install KN-018 on every post.

For a modern composition, the distribution of large elements across one or several verticals often looks more interesting.

For example:

on the first post, the sphere is at the top;

on the second, a small cube is used;

the third remains almost smooth;

on the fourth, KN-018 is placed closer to the lower part;

on the fifth, an elongated figure is installed.

This creates rhythm, but without direct mechanical repetition.

If the interior requires symmetry, a different principle can be used. Two KN-018 units are placed mirror-symmetrically relative to the central axis, and an element of another shape is installed between them.

For a long wall, a module of three or four types of posts can be developed, and then repeated across the width of the structure.

This method helps maintain order even in a fairly complex decorative pattern.

«Prestige» sanding quality

For KN-018, «Prestige» sanding quality is provided.

For a rounded element, surface preparation is especially important. On a sphere, there are no flat planes that could visually hide individual areas: light flows smoothly across the entire shape, so the quality of processing directly affects the perception of the product.

The prepared surface is suitable for further application of the selected decorative finishing system.

If it is necessary to emphasize the mass, transparent and tinted coatings are used.

If geometric elements must match the color of furniture or other interior parts, the finish can be selected to match the overall project palette.

It is desirable that all elements of one structure be processed in the same way. This helps achieve a uniform shade and degree of gloss.

KN-018 for designers and architects

The finished geometric shape is convenient for developing individual interiors.

The designer knows its real dimensions in advance and can accurately determine its position inside a partition or shelving unit.

This is an important advantage over a conventional decorative element that exists only in visualization and then requires separate development in production.

KN-018 can be included in the project as a specific ready-made part.

Known:

• dimensions;

• material;

• mounting dimension;

• shape character;

• possibility of combining with other elements of the series.

Thanks to this, it is easier to move from visualization to actual manufacturing of the structure.

For architectural projects, the ability to assemble large spatial compositions from repeating modules is especially interesting.

For furniture and joinery workshops

For furniture production, KN-018 allows using a ready-made complex volume instead of manufacturing each spherical part separately.

This is convenient in production:

• decorative posts;

• open shelving;

• partitions;

• consoles;

• display cases;

• non-standard furniture;

• interior structures made of solid wood.

If several identical items are required, the standard geometric shape helps maintain repeatability of proportions.

The master can focus on the overall structure and finishing, using ready-made elements as decorative modules.

At the same time, it remains possible to adapt the final result: change the arrangement of shapes, their quantity, combine the sphere with other details, and choose the material for a specific order.

What to consider before ordering KN-018

Before purchasing the geometric shape KN-018, it is recommended to determine several project parameters.

First of all, it is necessary to check the mounting size of 34 mm and select compatible mating parts.

Then, consider the external dimensions of 104 × 104 × 109 mm. There should be enough space around the sphere.

It is necessary to decide in advance what material the entire composition will be made of — beech or oak.

It is also advisable to determine the nature of the pattern. If KN-018 is used as the main accent, it should not be repeated too often. If the sphere is part of a regular ornament, the position of the elements should be marked out in advance.

For complex structures, it is useful to do a preliminary assembly without final fixation. This allows you to view the pattern from different points in the room and adjust the arrangement of the shapes.

Buy a solid wood sphere KN-018

KN-018 is suitable for those who need to buy a wooden ball with holes, but it is important to get not a simple blank, but a ready-made element for a partition, stand, or furniture structure.

The size of about 104 mm makes the figure expressive. The mounting size of 34 mm allows it to be used in a modular system, and the choice between beech and oak helps to match the product with the rest of the wooden trim.

KN-018 can be used:

• as a wooden ball for a decorative partition;

• as an element of an interior stand;

• as a geometric shape for an open shelving unit;

• as a decorative furniture detail;

• as a module for a spatial composition;

• as part of an original solid wood construction.

Together with other geometric elements of the wooden construction set KN-018 allows you to create a custom solution for a specific interior.

Order KN-018 for a partition or shelving unit

If you need to order wooden elements for a partition, it makes sense to consider KN-018 not as a separate decorative piece, but as part of the overall composition.

First, you can define the main lines — the posts and horizontal elements. Then choose points for the large spheres. After that, add cubic, elongated, and small rounded pieces.

This order helps achieve a balanced pattern without excessive decoration.

KN-018 works well as a large accent. Its rounded shape stands out among straight lines, but remains versatile enough for different interior styles.

In beech, the figure looks lighter and calmer. In oak, the texture of natural wood is more pronounced.

For a complete project, additional pieces can be selected in the section «Constructor» STAVROS.

Characteristics of the geometric figure KN-018

• Item number: KN-018.

• Product type: geometric shape, rounded element of a wooden construction set.

• Size A: 104 mm.

• Size B: 104 mm.

• Size C: 109 mm.

• Mounting size D: 34 mm.

• Material: beech or oak.

• Sanding quality: "Prestige".

• Application: wooden partitions, open shelving, racks, custom furniture, and interior structures.

• Shape: large rounded decorative element with mounting holes.

Geometric figure KN-018 is an expressive element of a wooden construction set.

KN-018 is worth choosing when a regular straight post is not enough and the interior structure requires a noticeable but laconic wooden accent.

The large spherical shape pairs well with vertical and horizontal lines, softens the strict geometry of a partition, and helps diversify the pattern of an open shelving unit.

The model can be used independently or combined with cubes, cones, elongated shapes, and other elements of the construction set. This allows for assembling both symmetrical classic compositions and more free-form modern structures.

KN-018 made of beech or oak is suitable for residential and commercial interiors, custom furniture, designer work, or joinery production. Natural solid wood, clear dimensions, and a mounting size of 34 mm allow for planning the project in advance and using the geometric figure as a full-fledged part of a wooden system.

If you need to buy a wooden sphere for a partition, order geometric elements from solid wood for a shelving unit, or select decorative details for a furniture post, KN-018 allows you to solve this task within a single wooden construction set and create a custom composition for a specific space.