The old estimate STL-008 lists 900×760×332 mm: how to buy a carved wooden table base according to the current specification 804×750×252 mm

The design project was completed several months ago. The specification still contains: “STL-008 — 900×760×332 mm.” The countertop was not ordered then, but now it is time to put it into production. The client opens the card for the same STL-008 and sees a different product line: A×B×D = 804×750×252 mm.

In this situation, you cannot choose numbers based on the principle of “which ones look most similar to the old project.” For a new order, the starting point should be the current product table and the valid drawing of the item. The old 900×760×332 mm should be kept in the documentation only as a previous design record, marked as not to be used for purchasing until re-verification.

It is especially dangerous to launch the countertop according to the old specification while ordering the underframe according to the current card. Even if both contractors formally work with the STL-008 article, they may actually be designing two different geometries. Therefore, first fix the current version of the underframe, obtain the valid drawing, coordinate it with the countertop manufacturer, and only then launch the top into production.

If the project is ready for re-verification, you can buy the carved wooden underframe STL-008 after the new specification replaces the old one in all working documents.

Go to Catalog

Carved wooden underframe STL-008: what the current product table shows

The current STL-008 card in the size table indicates:

A×B×D = 804×750×252 mm.

Beech and oak are available, as well as two sanding qualities — Standard and Prestige. The card includes preparation options "Under enamel" and "Under tinting".

The current price of the underframe depends on the material and sanding:

Version STL-008	Price
Beech Standard	113 520 ₽
Beech Prestige	156 060 ₽
Oak Standard	160 710 ₽
Oak Prestige	207 820 ₽

By default, the product is delivered disassembled, furniture fittings are included. If an assembled and glued underframe is required, this must be separately indicated to the manager.

For ordering, the full line is important, not just the article number:

STL-008 / A×B×D 804×750×252 mm / beech or oak / Standard or Prestige / selected preparation / quantity / degree of readiness.

This way, the seller, designer, and tabletop manufacturer work with the same version of the product.

If the task is just starting and you need Buy table base, the category is useful for comparing other bases. But if STL-008 is already included in the project, you first need to understand its current specification.

Why does the same page still contain 900×760×332 mm

Below the current product table on the page, an older descriptive text remains, where STL-008 is called a product with dimensions of 900×760×332 mm.

This creates a real problem for the buyer: both figures are on the same page and refer to the same item.

You should not conclude from this that one value is "definitely erroneous" in a technical sense and the other is "corrected." For commercial work, it is enough to record the fact of the discrepancy:

• current product table: 804×750×252 mm;
• old descriptive block: 900×760×332 mm.

If a new order is being placed now, you cannot automatically carry the old text into the working specification. You need to use the current table along with the up-to-date drawing and, if necessary, additionally confirm the data with a manager.

This approach is also important because the old figure may already live separately from the website: in a designer's PDF, a buyer's Excel, a contractor's estimate, or correspondence from two months ago.

Our factory also produces:

View Full Product Catalog

How much the two dimensional records differ

It is useful to see the difference numerically, but without independently deciphering the letter parameters.

Position in record	Old line	Current line	Difference
First	900 мм	804 мм	−96 mm
Second	760 мм	750 мм	−10 mm
Third	332 мм	252 мм	−80 mm

These discrepancies are too large to be considered a harmless rounded entry.

The first and third digits are especially noticeable: 96 and 80 mm of difference can be critical for a tabletop, overhangs, mounting scheme, or overall furniture project — depending on what the dimensions on the current drawing actually represent.

But the article does not assign values on its own. The phrase "the first digit is definitely the table width, the third is definitely the mounting base" without a drawing would be a guess.

The correct action is to open the current drawing STL-008 and work with the manufacturer's designations.

804×750×252 mm cannot be independently deciphered from a photo

The page states:

A×B×D = 804×750×252 mm.

There are images and a drawing nearby. But the photo of the underframe does not allow reliably determining which dimension corresponds to specific support, mounting, or external geometry.

Even if it visually seems obvious that 750 mm "should be the height," project documentation cannot be built on a guess.

For the tabletop, household abbreviations like the following are especially dangerous:

"base approximately 804 by 252, height 750."

Such a phrase does not convey where the contact points are, which parts of the product protrude further, where the mounting zone runs, and how the drawing should be oriented.

Therefore, the tabletop manufacturer is given not a retelling of the dimensions, but the actual current drawing STL-008.

The article STL-008 without a size version is no longer sufficient

Bad request:

STL-008, oak, 1 pc.

It does not show which data version the buyer is working with.

Better:

STL-008 / current table A×B×D = 804×750×252 mm / oak / Prestige / For tinting / 1 pc. / drawing verified as of order date.

Such a record is especially needed if:

• the design project is old;
• the purchase is postponed for several months;
• the underframe and tabletop are made by different companies;
• one contractor works from PDF, the second from the website;
• part of the project has already been sent to production;
• The customer has several versions of the specification sheet.

For an expensive product costing from 113,520 ₽, one line with the current version of the specification is much cheaper than finding out after the countertop is manufactured who worked with the old figures.

Buy the underframe for the countertop now, and have the countertop made later: the correct sequence

If STL-008 and the countertop are ordered from different contractors, the sequence of actions must be strict.

1. Lock in the STL-008 article number.
2. Lock in the current product line 804×750×252 mm.
3. Obtain the current drawing.
4. Choose beech or oak.
5. Choose Standard or Prestige.
6. Clarify the preparation: for enamel or for tinting.
7. Determine the delivery: disassembled or separately agreed assembled.
8. Send the current drawing to the countertop manufacturer.
9. Coordinate the dimensions, overhangs, attachment points, and weight of the countertop according to the drawing.
10. Only after this, start the countertop into production.

This is exactly how you should act if needed Base for countertop, and the top will be manufactured separately.

If you change the order and first order the stone or solid wood according to the old estimate, purchasing the current STL-008 may turn into a task of reworking an already expensive part.

The old countertop is designed for 900×760×332: can you simply replace the numbers

No. Mechanically replacing three numbers in the table is not redesigning the table.

If the old countertop is already designed for the previous specification, you need to re-check at least:

• its outer contour;
• position of the underframe beneath the top;
• overhangs on the sides;
• mounting points;
• mounting platforms;
• final height of the finished table;
• legroom;
• weight of the tabletop;
• acceptable method of connection.

For example, a designer may simply reduce one digit in Excel, but the old tabletop drawing will still remain linked to the previous base.

Therefore, it is not the number in the cell that is adjusted, but the entire set of linked documents.

The carved wooden underframe and the tabletop must first meet on the drawing

Let's imagine a typical project.

STAVROS supplies the underframe.

The stoneworker makes the countertop.

The designer maintains the overall interior album.

The specifier processes the order.

If everyone has their own file, four potential versions of the geometry arise.

The working rule should be one:

for STL-008 there is one approved specification, and all contractors receive the same current drawing.

Do not send a screenshot of the website to the stoneworker. A screenshot quickly loses context: it may not have the date, full designation, or version number.

Better to pass the original drawing and an accompanying line:

STL-008; current product table as of the check date — A×B×D 804×750×252 mm. Do not use the old record 900×760×332 for production.

This short clarification prevents far more errors than a long correspondence after manufacturing.

Buy a wooden underframe made of beech or oak: the material is fixed simultaneously with the size

When the actual geometry is confirmed, the material is chosen.

STL-008 is available in beech and oak.

According to the current table:

• beech Standard — 113,520 RUB;
• beech Prestige — 156,060 RUB;
• oak Standard — 160,710 RUB;
• oak Prestige — 207,820 RUB.

The difference between beech Standard and oak Standard:

160 710 − 113 520 = 47 190 ₽.

Between beech Prestige and oak Prestige:

207 820 − 156 060 = 51 760 ₽.

Therefore, the material is a full commercial parameter of the order, not a note that can be added later.

If you need Buy wooden base, first determine the actual geometry of the specific STL-008, and then compare the material and finishing within the already confirmed SKU.

Standard or Prestige: this is a separate line in the specification

Both degrees of sanding are available in the product card.

Standard is basic processing with the possibility of further refinement.

Prestige includes more detailed manual sanding and is better prepared for subsequent finishing.

For STL-008, the price difference is noticeable.

Beech:

156 060 − 113 520 = 42 540 ₽.

Oak:

207 820 − 160 710 = 47 110 ₽.

This does not mean that Prestige is automatically more advantageous. You need to compare the cost of the underframe and the amount of finisher's work.

If the old estimate contains only "STL-008 oak", it is insufficient not only because of the dimensions. The quality of processing is not defined in it.

"Under enamel" and "Under tinting" should not be mixed with the concept of a finished color

STL-008 card offers both preparation options.

This does not mean that the underframe is already painted in the desired color.

For a commercial list, it is better to separate:

• the material;
• sanding;
• quality of re-gluing;
• future finish;
• finish contractor.

If the tabletop and underframe should visually work as a single piece, the color and finish are coordinated separately from the dimensional specification.

This avoids a false situation where the designer sees "Under enamel" and assumes the color is already defined.

Disassembled STL-008 or assembled: what to record in the new estimate

By default, STL-008 is supplied disassembled. Hardware is included.

If the customer needs an assembled and glued version, this is separately communicated to the manager.

For our article, one line is enough:

Degree of readiness: disassembled / assembled and glued per separate agreement.

Do not turn this into a standalone assembly guide. The key point is that the buyer should not consider the presence of fittings as confirmation of finished factory assembly.

How to correct an old list without deleting history

The old value should not be erased as if it never existed.

A designer or specifier may have several related files, and later it will be unclear why the numbers changed.

It is better to make an entry:

STL-008 — old project line: 900×760×332 mm — DO NOT use for a new order.

In the next line:

Current product table as of the check date: A×B×D = 804×750×252 mm.

And in the third:

Final production specification — after verifying the current drawing STL-008 with the countertop manufacturer.

This preserves the change history while eliminating ambiguity.

If Excel is used, the old row can be kept in an archive sheet, and in the working sheet, a link to the current version of the document can be placed.

What to send to the countertop manufacturer

The minimum working package must contain:

1. exact item number STL-008;
2. current dimension line;
3. valid drawing;
4. selected underframe version;
5. material of the future countertop;
6. its preliminary size;
7. thickness;
8. actual or estimated weight;
9. requirements for overhangs;
10. intended fastening scheme;
11. date of specification check.

The date is not needed formally. In this case, there are already two different dimensional records on one page, so without a date any screenshot or PDF quickly becomes disputable.

Project from another city: we do not send only a link to the card to the contractor

The link is useful, but it is not enough for production.

The site card may be updated after the countertop has already gone to the workshop. Then the contractor will open the same link in a week and see data that differs from what the designer based their work on.

The production package must be a fixed document.

In the cover letter, you can write:

To manufacture the countertop, use the attached current drawing STL-008 and specification A×B×D = 804×750×252 mm, verified as of the order date. Do not use the old project record 900×760×332 mm.

Such text is clear to both the carpenter, the stone fabricator, and the purchasing agent.

Version control: how to prevent old 900×760×332 from returning to the project through another file

Even after correcting the main estimate, the old line may remain in other documents: in the designer's specification, the supplier's letter, the stone fabricator's estimate, the client presentation, or an old PDF on the shared drive.

Therefore, fixing the Excel file alone is not enough.

It is useful to introduce a simple working version identifier:

STL-008 — working specification dated 08.09.2026: A×B×D = 804×750×252 mm.

The same line is placed:

• in the purchasing list;
• in the letter to the manager;
• in the package for the countertop manufacturer;
• in the installation sheet;
• in the incoming inspection report.

Old documents do not necessarily need to be deleted. It is much more reliable to mark them:

Archive. Not for production use.

This approach is especially useful if the project is managed by several contractors. When someone sends an old PDF with 900×760×332 mm, the dispute is resolved not by the participants' memory, but by the date and status of the document.

For expensive custom furniture, this is essentially revision control: one current version goes into all processes, the rest remain only in the archive.

How much does the choice of material and sanding cost in the current STL-008

After confirming the geometry, there remains a commercial fork of four options.

Execution	Price	Difference relative to the Standard beech
Beech Standard	113 520 ₽	—
Beech Prestige	156 060 ₽	+42 540 ₽
Oak Standard	160 710 ₽	+47 190 ₽
Oak Prestige	207 820 ₽	+94 300 ₽

The most expensive of the shown options is Prestige oak.

Difference from the base Standard beech:

207 820 − 113 520 = 94 300 ₽.

This is almost the cost of another inexpensive piece of furniture, so the material and quality of sanding cannot be left to the final stage of the order.

If a countertop made of expensive stone is already being designed, it is better to calculate the budget in layers:

undercarriage → finishing → countertop → fastening assembly → delivery → assembly/installation.

The price of STL-008 is not equal to the price of the finished table.

It is especially important not to choose Prestige just because of the word "better." Its meaning is deeper surface preparation. If the finisher still plans their own serious refinement, the commercial effect should be evaluated together with their work.

Conversely, if the product must quickly move to the finish with minimal manual preparation, Prestige may be justified.

After choosing an option, it must be fixed simultaneously with the current size. The entry "STL-008 oak" without Standard/Prestige and without A×B×D remains incomplete.

How to accept STL-008 after delivery and not open the old estimate

Acceptance should also be based on the current order.

You cannot take out the old interior album with 900×760×332 mm and declare the delivery incorrect based on it.

They verify:

• article number;
• confirmed dimension line;
• the material;
• Standard or Prestige;
• preparation;
• quantity;
• degree of readiness;
• hardware configuration;
• approved drawing.

If the product was ordered disassembled, it should be accepted exactly that way.

If assembled version was separately agreed upon, this condition must be in the order.

What to do if the countertop has already been manufactured according to the old specification

This is the most unpleasant edge case.

Don't immediately buy STL-008 hoping that "the difference is small."

First, the current drawing of the underframe is sent to the countertop manufacturer, and they are asked to check compatibility with the already finished top.

Three outcomes are possible.

Compatibility is confirmed

Then STL-008 can be ordered according to the current specification, and the mounting assembly is documented.

The countertop needs modification

First, they obtain clear technology, cost, and feasibility of the rework. Only then do they confirm the order for the underframe.

Compatibility is not confirmed

It's better to stop the purchase of STL-008 and reconsider the base or the countertop.

This is the case where the commercially correct action is not to click "buy," but to temporarily pause the order.

When it's better to pause the purchase of STL-008 until clarification

Do not place an order blindly if:

• the countertop has already been manufactured to 900×760×332 mm;
• it's unclear where the old geometry came from in the project;
• the contractor has already made holes;
• the current drawing has not been passed to the top manufacturer;
• the installation zone is unknown;
• the designer has not confirmed the new height and overhangs;
• the buyer and production have different versions of the bill of materials;
• The invoice does not record the material, sanding, and degree of readiness.

For a product costing more than 100 thousand rubles, one additional document verification is a normal part of the purchase, not unnecessary bureaucracy.

Errors when ordering STL-008 according to the old project

Error: use 900×760×332 from the lower description. Reason: the numbers are on the same page. Consequence: the new purchase goes according to the old record. Solution: current table plus drawing.

Error: write only STL-008. Consequence: it is unclear which version of the geometry is approved. Solution: full line A×B×D.

Error: independently call A, B, and D mounting dimensions. Consequence: the contractor designs the assembly based on assumption. Solution: read the drawing.

Error: launch the countertop before the underframe. Consequence: expensive incompatibility. Solution: first coordinate both parts on one drawing.

Error: delete the old line without a note. Consequence: other participants continue to work according to the old PDF. Solution: leave history with a "do not use" mark.

Error: consider the presence of hardware as finished assembly. Solution: separately specify the degree of readiness.

Final check before payment: the same STL-008 in all documents

Before payment, it is useful to open four things side by side: a commercial proposal, a work sheet, the current STL-008 drawing, and the countertop file. All of them should contain the same article number and one agreed version of dimensions.

If at least one document again shows 900×760×332 mm, it is better not to confirm the order until the source of that line is established. This especially applies to an invoice or production task: an outdated figure in a final document is more important than a dozen correct messages in correspondence.

After such verification, the order becomes reproducible: any project participant can open the package and understand which version of STL-008 is actually approved.

Final specification of order STL-008

After all checks, the request may look like this:

STL-008 / A×B×D = 804×750×252 mm / oak / Prestige / For tinting / 1 pc. / delivery disassembled, hardware included / current drawing verified / countertop agreed according to the same drawing.

If beech Standard is needed:

STL-008 / A×B×D = 804×750×252 mm / beech / Standard / selected preparation / 1 pc.

If an assembled and glued product is required, this is added as a separate line after agreement with the manager.

Such an order is much more reliable:

"STL-008 underframe as in the old project."

After updating all documentation, you can Buy a wooden table base via the category or go directly to the STL-008 card.

Questions before purchasing STL-008

What size of STL-008 is specified in the current product table?

A×B×D = 804×750×252 mm.

Why does 900×760×332 mm appear?

This line was retained in an older descriptive block of the same card.

Can STL-008 be ordered with 900×760×332 mm?

For a new order, it is better to use the current table and the valid drawing, and not carry over the old entry without additional confirmation.

What do A, B, and D mean?

The assignment of letters should be checked in the current STL-008 drawing. Do not decipher them from a photo.

How much does STL-008 made of beech cost?

As of the check: 113,520 ₽ Standard or 156,060 ₽ Prestige.

How much does STL-008 made of oak cost?

160,710 ₽ Standard or 207,820 ₽ Prestige.

What should I choose — Standard or Prestige?

This depends on the requirements for subsequent finishing and the amount of manual refinement. Prestige has more detailed sanding.

Does STL-008 arrive assembled?

By default, it comes disassembled, with hardware included.

Can I get it assembled and glued?

Yes, this needs to be separately coordinated with the manager.

Can the tabletop be manufactured first, and then STL-008 purchased?

It's risky. It's safer to first coordinate the current drawing of the underframe and tabletop.

What to do if the tabletop has already been made according to the old dimensions?

Send its data and the current STL-008 drawing to a specialist and get compatibility confirmation before purchasing.

Do the old 900×760×332 dimensions need to be removed from the project?

It's better to keep them as an archive record with a clear note "do not use for a new order".

What should be sent to the tabletop manufacturer?

The article number, current dimension line, valid drawing, underframe version, tabletop parameters, and verification date.

Where to buy STL-008?

In the STL-008 carved underframe card or in the STAVROS category of wooden frames and underframes.