One line in the invoice, two doors in the iconostasis: how to order carved gates IKN-010 measuring 470 × 1570 mm

Royal doors can be purchased in a few minutes: open the product card, choose the material and quality of sanding, add the item to the cart. But for IKN-010, this speed can lead to an incorrect specification. The card shows one product item and a size of 470 × 1570 × 23 mm, while the description simultaneously uses the phrase "each pair of doors." For a double-door element of the iconostasis, this is a fundamental discrepancy: before payment, the buyer needs to know exactly what the quantity "1" means—one door, a pair of doors, or another set—and what the width of 470 mm refers to.

Here, you cannot substitute a convenient answer for the manufacturer's data. You cannot automatically decide that 470 mm is the width of one door. You cannot just as confidently consider 470 mm to be the full dimension of a closed pair. The card does not explicitly clarify this. Therefore, the buyer's task is not to guess the meaning of a single number, but to turn a beautiful product page into an unambiguous order: the number of doors, the size of each door, the full size of the closed pair, material, sanding, preparation for finishing, and the composition of one line in the invoice must be confirmed before payment.

If the project is already ready and you want buy carved doors IKN-010First, save the card as the initial position, but do not transfer its parameters to the working drawing without decoding. The size 470 × 1570 × 23 mm is confirmed. Beech and oak are confirmed. The sanding options "Standard" and "Prestige" are confirmed. For the selected option, the card shows the preparation "Under enamel." The product is made to order. However, the unit of sale and the meaning of the 470 mm width require a separate written response.

For a complex church product, this is not bureaucracy. An error in one line of the invoice can double or reduce the actual number of panels, change the opening calculation, affect the placement of columns and capitals, and then manifest itself during installation. Therefore, the article is structured not as a general story about the Royal Doors, but as a professional check of a specific order IKN-010.

Carved Door IKN-010

from 713.10 $

Go to Catalog

Carved Doors IKN-010: What the Product Card Really Shows

The card has enough precise data to start design, but not enough to finish the specification without clarifications. Let us divide the confirmed facts and the questions that remain open.

This table sets the correct order of conversation with the manager. There is no point in asking "is it really two leaves?" and then guessing the rest. A full breakdown of the product item is needed.

Written confirmation must answer at least four questions: how many leaves are included in the quantity "1", what is the size of each leaf, what is the full size of the closed pair, and what the price in the card refers to. Only after this does the number 470 × 1570 × 23 mm become a working size, not just a catalog line.

Watch video ...

One product item and the word "pair": where commercial risk arises

In an online store, we are used to simple logic. If the card for a handle says quantity "1", it is usually one handle. If one leg is sold, the cart shows one leg. If a set consists of several parts, the composition of the set is usually listed separately.

With the Royal Doors, the situation is more complicated due to the very nature of the product. In the iconostasis, the central doors are perceived as a double-leaf element, and the description IKN-010 speaks of a "pair of doors". At the same time, the commercial table displays one line and one price. The buyer sees a standard quantity counter and can draw either of two conclusions:

• "1" means one leaf, so for a pair you need to order "2";

• "1" means one pair, so ordering "2" is not allowed.

Both conclusions look logical. And that is exactly why neither can be accepted without confirmation.

If the customer independently increases the quantity to two, assuming the price refers to one leaf, they risk ordering two sets. If they leave it as one, assuming a pair, but the product is actually counted per piece, the opposite problem arises. When ordering for production, the error will not appear immediately, but after the documents are processed.

A reliable specification must literally contain the phrase: «Quantity 1 in order IKN-010 means ________. The set includes ________ leaves». The blank is filled not by the article's author or the designer, but after a written response from STAVROS.

Our factory also produces:

Bridge HL-017 Furniture Handle

from 9.05 $

Wooden decor N-239

from 14.75 $

Myron HL-039 Furniture Handle

from 9.92 $

Wooden Molding K-033

from 7.19 $

View Full Product Catalog

Royal doors made of wood: why the size 470 × 1570 × 23 mm cannot be read without decoding

Three numbers look familiar: width, height, thickness. But even if the designations A, B, and C in the card correspond exactly to this order, the main question remains — which unit of the structure does A = 470 mm refer to.

For a double-leaf opening, fundamentally different schemes are possible.

Option one: 470 mm refers to one leaf

Then two leaves theoretically give a larger total width, but the exact dimension of the closed pair cannot be obtained by simple multiplication without knowing the central joint, side gaps, and installation scheme. Even if mathematically 470 × 2 = 940 mm, this is not yet the opening size and not automatically the full dimension of the installed structure.

Option two: 470 mm refers to the pair

Then each leaf would be significantly narrower, but the card does not indicate that the width is specified for both leaves together. Such a conclusion also cannot be fixed in the project without confirmation.

Option three: 470 mm refers to a product part of a different logic

Sometimes the catalog size is measured by the maximum dimension of the decorative part, without installation allowances and the adjacent frame. For IKN-010, this cannot be stated as a fact, but the example itself shows why one size does not replace a drawing.

Before payment, the buyer needs not guesses, but a breakdown:

• what A = 470 mm means;

• what B = 1570 mm means;

• what C = 23 mm means;

• size of one leaf;

• size of two leaves in the closed position;

• recommended or design clear opening;

• installation gaps;

• location of hinge axes;

• permissible adjacency to columns and other elements of the iconostasis.

Double-leaf gates for the iconostasis: first the opening, then the basket

Even after answering the question "leaf or pair," a complex product cannot be designed based only on the card size. The iconostasis is not an empty rectangular niche. The central opening is connected to columns, bases, capitals, horizontal bands, decorative frames, and adjacent icon fields.

Before buy royal doors, it is useful to take a separate specification of the opening. It includes not only width and height.

Required:

1. clear width of the opening at several points;

2. clear height on the left, in the center, and on the right;

3. thickness or depth of the mounting area;

4. position of vertical axes;

5. free space for hinges;

6. actual distance to adjacent columns;

7. protrusion of bases and capitals;

8. lower mark of the leaves;

9. position of the threshold or base;

10. direction and opening angle;

11. clearance zone of each leaf;

12. thickness of adjacent elements that may enter the opening trajectory.

If the opening has deviations, you cannot average the dimensions and consider the matter closed. For carved wooden leaves, the actual geometry is especially important, because a large decorative element does not mask a construction error — it emphasizes it.

The width of the opening and the width of the gate are not the same thing

One of the most common mistakes when ordering door and leaf elements is transferring the product size directly to the opening size. The number 470 mm by itself does not indicate what gap is needed on the sides, how the central joint works, or where the hinge axis is located.

For a designer, it is useful to keep three different concepts separate:

Leaf dimension — the actual width of the wooden part itself.

The dimension of a closed pair is the total width of two leaves in the closed position, taking into account the structural central unit.

The clear installation opening is the distance between the fixed elements of the iconostasis, into which the pair must fit with the necessary gaps and hardware.

If all three values are labeled as "width" in the documents, confusion is almost inevitable. Therefore, the request needs separate lines.

Wooden Royal Doors: one item in the cart — one leaf or a set

This is the core of order IKN-010. Other parameters cannot be considered closed until the unit of sale is deciphered.

A bad line looks like this:

IKN-010 — 1 pc.

It is convenient for an accounting program, but it says almost nothing to the designer, installer, and customer.

A good line should be detailed:

Carved Doors IKN-010 — number of product items: 1; composition of one item: ________; number of leaves per item: ________; size of each leaf: ________; full size of the closed pair: ________; material: ________; sanding: ________; preparation: ________.

Yes, such a record is longer. But it is unambiguous.

It is especially useful to distinguish between the concepts of "piece", "leaf", "pair", and "set". If the invoice uses "pcs.", the note should explain what exactly counts as one piece.

Price of IKN-010: why the number in the card requires the same clarification as the size

A buyer naturally associates one table row and one price with one product unit. But if it is unclear what the product unit is, the meaning of the price is also unclear.

Therefore, the question to the manager should not be "how much do the gates cost?", but more precisely:

• is the price per one leaf or per set;

• if per set, how many leaves are included in it;

• if per one leaf, what quantity is needed for a double-leaf opening;

• does the price include only wooden carved elements or also any hardware;

• how this configuration will be recorded in the invoice.

It is better to check the exact current price right before placing an order: it may change, but the purpose of checking remains the same. A buyer searching for "IKN-010 price," "price of a pair of royal doors," or "cost of one leaf of the royal doors" would find it more useful to first understand for which specific unit the amount is stated and what is included in one product item.

Beech or oak: the material must be fixed for the entire pair

In the IKN-010 card, beech and oak are confirmed. This is not a decorative detail at the bottom of the specifications list. For two leaves, the material must be agreed upon as a single item.

The wording "beech/oak" must not be allowed in an already paid invoice. A slash is fine for a catalog where the user makes a choice. In an order, one option is required.

Beech for a paintable system

For the selected beech option, the card shows the preparation "Under enamel." In such a project, the carved shape becomes the main visual carrier, and the natural wood color is covered by an opaque finish. Especially important are uniform sanding and a single painting system for both leaves.

Oak for a project where wood remains part of the image

Oak has a more pronounced natural grain. If the future finish preserves or emphasizes the texture, the two leaves should be perceived as a visual pair. Natural differences in wood are acceptable, but the final composition should look deliberately assembled.

Material of adjacent elements

When the gates are part of a large iconostasis, the choice of wood should preferably be linked to columns, capitals, baguettes, and other carved details. This does not mean that absolutely everything must be made of the same species, but the difference should be intentional in the design, not accidental.

"Standard" or "Prestige": why two leaves must have the same degree of preparation

The card offers two sanding qualities — "Standard" and "Prestige". If doors are ordered as a pair, mixing options within one opening is not allowed without special justification.

Two leaves stand side by side. Light falls on them simultaneously. A different degree of preparation may show up after painting or tinting more strongly than on two parts located in different rooms.

Therefore, the specification must have one line:

Sanding quality for all leaves in the set — ________.

If "Standard" is selected, the painter must understand the scope of subsequent preparation. If "Prestige" is selected, this is also recorded in the order. In both cases, uniformity is important.

Under enamel: what this mark gives the buyer and what it does not promise

The phrase "Under enamel" refers to the preparation of the wooden blank for an opaque coating. It does not mean that the finished doors are already painted white, gold, green, or any other color.

For ordering, you need to distinguish:

• material;

• sanding quality;

• quality of lamination or preparation;

• actually the finishing touches.

If painting work is done separately, the invoice should accurately specify the preparation. If the finish is part of a separate order, the color and technology are agreed upon in a separate document.

For a pair, a single finishing cycle is especially important. Painting two panels with different batches of material can result in differences in shade and gloss level, even if the wood and sanding are the same.

Carved doors for an iconostasis: what to provide to the manufacturer regarding the opening

The phrase "opening 940 × 1600 mm" is not enough. A full measurement should describe the installation location.

Pass on:

• a diagram of the opening with dimensions;

• photos taken strictly from the front;

• photos of the side junctions;

• measurements at the bottom, middle, and top;

• height at three points;

• position of existing columns;

• maximum projection of bases;

• maximum projection of capitals;

• position of the horizontal belt above the opening;

• thickness of fixed parts of the iconostasis;

• information about finished or not yet applied finishing;

• expected hardware, if already selected;

• side and trajectory of opening.

The more accurate the initial data, the fewer decisions the installer will have to make on site.

Columns and capitals: we check not the ornament, but the free movement of the leaves

In the iconostasis, doors rarely exist in a single frame. The central group may be bounded by columns, pilasters, bases, and capitals. A beautiful protrusion of an adjacent detail can fall into the opening trajectory of the leaf.

Therefore, before capital to buy, you first need to fix the full size of the closed pair IKN-010 and model the position of the leaves in the open state.

Especially check:

• the protrusion of the capital relative to the column axis;

• the protrusion of the base;

• the edge of the carved baguette;

• decorative overlays on the adjacent vertical;

• the handle or other protruding hardware, if provided by the project;

• the thickness of the leaf itself, 23 mm;

• the position of the hinge and the radius of movement of the outer edge.

Beautiful adjacency in the front view does not yet mean mechanical compatibility.

Carved baguette next to IKN-010: one drawing instead of selecting "by style"

In commercial search, the query "buy wooden baguette" is very broad. For an iconostasis, it cannot be chosen only by matching the ornament in a photo.

When the gates are part of a single carved composition, adjacent frame and horizontal elements must be aligned on the same facade and in the same cross-section. After approving the dimensions, you can Buy wooden picture frame molding proceed with the agreed material and future finishing.

The drawing checks:

• the height of the baguette relative to the top line of the gates;

• thickness;

• a protrusion;

• the distance to the carved field;

• the joint with the capital;

• symmetry of the left and right sides;

• the place where the ornament ends or repeats.

This is much more reliable than first buying the gates, then picking a "similar" baguette, and then trying to reconcile different carving scales during installation.

Church decor in one batch: when a single order reduces the number of random decisions

For the new iconostasis, IKN-010 is not the only element. Columns, capitals, bases, crosses, frame profiles, and other carved details may be nearby. In such a project, it is useful to first buy wooden church decor as a coordinated set of items, rather than assembling the composition through independent purchases over several months.

The advantage of the complete-set approach is not that all elements must be identical. It lies in unified documentation:

• one version of the facade;

• a single mark for the central opening;

• one chosen material or an agreed combination of materials;

• uniform preparation for finishing;

• one junction map;

• clear installation zones;

• Agreed dimensions.

When ordering in stages, each subsequent item must be re-compared with already manufactured parts.

Comparison table: what changes with different interpretations of line IKN-010

The table deliberately does not choose one option. Its task is to show the price of uncertainty. Until the manufacturer confirms a specific interpretation, each of them remains only a hypothesis.

What to buy together: a set around the gate, not a random set of decor

Carved gates are the central position, but the finished opening consists of several groups.

This table deliberately contains no invented hardware article numbers. The IKN-010 card does not provide sufficient basis to state which hinges, handles, or fasteners are included in the delivery. This issue should be raised in written confirmation.

Hardware: the most dangerous place for speculation

The buyer sees the gate and naturally assumes the presence of hinges. Another buyer, on the contrary, is sure that only the carved wooden part is sold. As long as the card does not detail the configuration sufficiently, the article should not choose one version.

Before payment, ask:

• whether hinges are included;

• whether fastening elements are included;

• whether handles are provided;

• whether a central lock is provided;

• whether there are lower or upper stops;

• Does the mounting bracket's counterpart come included in the kit?

• Are the mounting spots for the hardware prepared?

• Do we need to specify the hinge model in advance?

• How does the hardware affect the recommended opening?

If the answer is "not included," this is not a product defect. It simply means that the designer must independently assemble the mounting kit.

Drawing IKN-010: the document is more important than a beautiful photo

For a decorative purchase, a photo answers the question "do I like the pattern?" For a leaf element, it does not answer installation questions.

A working drawing should allow you to see:

• external dimensions;

• position of the decorative field;

• thickness;

• edge geometry;

• opening direction;

• mounting points;

• gaps;

• position relative to adjacent elements.

If a product drawing is available on the page, it should be used as source documentation, but for a double-door scheme, you still need to request a breakdown of the 470 mm size and the composition of the line item. One file does not cancel a written question about completeness.

Full-scale mockup: when paper saves the cost of reworking the iconostasis

For the central opening, a full-size mockup is useful, at least in the form of outlines on a wall or panel.

After receiving confirmed dimensions, note:

• left leaf;

• right leaf;

• central joint;

• side gaps;

• top line;

• hinge axes;

• adjacent columns;

• maximum projections of capitals;

• edge of the baguette;

• opening trajectory.

This makes it visible whether the pair looks too narrow for the existing iconostasis, whether the carved edge intrudes into adjacent decor, and whether there is enough height for the central composition.

The mockup is especially useful during restoration, when fixed parts already exist and changing them is more difficult than adjusting the order before production.

New iconostasis: why IKN-010 is better integrated into the system before manufacturing the frame

When a project starts from scratch, there is an opportunity to build the structure from the central opening.

First, the actual dimensions of IKN-010 and the unit of sale are confirmed. Then, around this information, they design:

• width of the central field;

• position of columns;

• width of bases;

• height of capitals;

• horizontal belts;

• adjacent icon fields;

• cross or finial;

• decorative baguette.

Thus, the gates are not "inserted" into a ready-made random niche, but become part of the overall architecture.

Restoration: measuring the old opening is more important than the nominal project size

In a historical iconostasis, the old drawing and the actual opening may differ. Wood, repairs, new coatings, and previous interventions change the geometry.

Therefore, you cannot simply take the size from the archive sheet and order IKN-010.

You need to take actual measurements today. If old sashes existed, it is useful to measure them as well:

• the width of each;

• height;

• thickness;

• hinge position;

• the central overlap;

• side gaps;

• the distance to the floor.

Then these data are compared with the new card and the approved drawing.

If IKN-010 is chosen for a chapel or a small space

The product card and the general category allow the use of church gates in projects of different scales. But the height of 1570 mm cannot be considered automatically suitable just because the room is small.

In a chapel, proportions are especially noticeable. Too massive adjacent columns can visually compress the opening, and too wide a frame can make the sashes secondary.

Therefore, a compact interior requires no less, and sometimes even more, precision in scale.

If the project is large: do not increase IKN-010 "by proportion" on your own

With a large iconostasis, there may be a temptation to say: "We need about 20% more." For a carved product, this approach is insufficient.

Changes in size may affect:

• ornament density;

• thickness of lintels;

• nature of the carved grid;

• visual mass;

• attachment points;

• thickness of the leaf;

• future hardware.

If a different size is required, it should be formalized as a separate agreed production task, not as arithmetic scaling of the card.

How not to confuse IKN-010 with a regular carved door

In search results, phrases like "carved doors for an iconostasis," "wooden doors for a church," and "royal gates made of wood" are found. They are similar in meaning, but in a work order, the exact article number and purpose must be used.

IKN-010 is identified by:

• article number;

• size 470 × 1570 × 23 mm;

• materials beech/oak;

• sanding options;

• church product category;

• carved execution.

This item should not be replaced with a random door leaf just because of similar height. In an iconostasis, the decorative program and proportions are connected to neighboring elements.

Practical ordering scenarios for IKN-010

Scenario: two leaves are already drawn in the project

First, send the facade to the manager and ask what quantity of IKN-010 corresponds to the drawn pair. Do not change the quantity in the cart yourself.

Scenario: the opening is not yet built

This is the most convenient situation. Get the confirmed full dimension of the pair, then set the clear opening and the position of adjacent columns.

Scenario: the opening is already ready

Take actual measurements and send them along with photos. Then confirm whether the card configuration fits without changes.

Scenario: only one leaf is needed as a replacement

Do not assume that the product item allows ordering half of a pair. Clarify the possibility of single-unit production and compatibility with the existing second leaf.

Scenario: the old leaf is preserved

Remove the template and dimensions of the old part. For a restoration project, not only the dimensions matter, but also the position of the joint, hinges, and pattern.

Scenario: order in oak with transparent finish

Agree on the material for both leaves and adjacent elements at once. Make a control sample of the future tinting.

Scenario: beech under enamel

Ensure identical sanding and preparation of both leaves. It is better to agree on the color on a separate sample.

Scenario: the gates come together with columns and capitals

Bring everything together on one facade and in the plan. You cannot select each item independently based only on the ornament.

Scenario: urgently need an invoice

Speed should not shorten the specification. Even if the invoice is needed today, add a breakdown of the composition of one product line.

Mistakes that turn one line of IKN-010 into a disputed order

Error 1. Multiply 470 mm by two and declare the width of the pair

The math is correct, but the initial assumption is not confirmed.

Error 2. Decide that a "pair of gates" automatically means two leaves in one price

The description and commercial unit may be formatted differently. A manager's response is needed.

Error 3. Put "IKN-010 — 1 pc." in the invoice without a note

The document does not explain what one piece is.

Error 4. Consider the card size as the size of the clear opening

Mounting gaps and hardware require a separate calculation.

Error 5. Choose beech for one leaf and oak for the other

For a visual pair, this is an unacceptable coincidence.

Mistake 6. Mixing "Standard" and "Prestige"

After finishing, surfaces may be perceived differently.

Mistake 7. Considering "Under enamel" as a finished paint job

This is preparation, not a designation of a specific color.

Mistake 8. Not asking about hardware

Hinges and fasteners cannot be attributed to the set without confirmation.

Mistake 9. Choosing capitals before checking the opening

Their protrusion can interfere with the trajectory of the leaves.

Mistake 10. Selecting a baguette only by photo

The profile size and position relative to the gates matter more than the general similarity of the ornament.

Error 11. Ordering decor at different times without a unified facade

Discrepancies appear in scale and junctions.

Error 12. Measuring the opening at only one point

The existing structure may have deviations.

Error 13. Forgetting about the bottom gap

The sash must move freely relative to the floor and threshold.

Error 14. Not checking the 23 mm thickness relative to the hinge

Hardware is selected based on the actual structure.

Error 15. Ordering "two pieces just in case"

In this card, it is the quantity that is the disputed unit, so a spare here is unacceptable as a solution method.

Error 16. Considering the description "each pair" as sufficient specification

Marketing text does not replace an invoice line.

Error 17. Not saving correspondence with configuration confirmation

When handing over the project to the installer, only a guess will remain.

Error 18. Not attaching a drawing to the invoice

For a complex product, it is useful to link the article number to a specific version of the drawing.

Error 19. Considering price as the main criterion

First, you need to understand for which unit it is specified.

Error 20. Agreeing on the size but forgetting the number of sashes

These are different parameters.

Who IKN-010 suits, and when a different project is needed

IKN-010 should be considered when the project matches a carved wooden model of the specified scale, with beech or oak material, and the central opening can be aligned with the actual dimensions of the product.

This position is especially appropriate:

• in a new iconostasis with a pre-designed central opening;

• in the chapel, if the proportions match;

• during restoration, when the new pair fits in size and ornamental task;

• in a set with carved columns, capitals, and baguette;

• in a project for enamel or another agreed finish.

Another option is needed if:

• the existing opening differs significantly in size;

• a different height is required;

• a different ornament is needed;

• the project requires a different sash thickness;

• it is impossible to ensure free opening;

• exact reproduction of the historical gates according to the preserved sample is required.

An honest refusal of an unsuitable card model is better than reworking the iconostasis around an already paid product.

How to buy IKN-010 on STAVROS and leave no contentious points in the documents

On the website, you can place an order via the cart or "Buy in 1 click". For a simple product, this is enough. For IKN-010, the cart should only be the beginning of the ordering process.

Before payment:

1. open the IKN-010 card;

2. select the material;

3. select grinding quality;

4. confirm preparation;

5. apply opening dimensions;

6. request breakdown of 470 × 1570 × 23 mm;

7. request quantity composition of "1";

8. request size of each leaf;

9. request full size of closed pair;

10. specify hardware;

11. verify total against invoice;

12. save drawing and written confirmation.

If a specific model has not yet been determined, you can first buy royal doors through a dedicated section and compare available items. If the project covers the entire iconostasis, it is more useful to work through the general the catalog of church decor made of wood, to see adjacent carved elements in the same product group.

Ready-made wording for a request to the manager

Below is not advertising text, but working wording that can be adapted to the project.

We ask you to confirm the configuration of the carved gates IKN-010. The card indicates the size 470 × 1570 × 23 mm, while the description uses the phrase "pair of gates". Please specify: whether the width of 470 mm refers to one leaf or to the entire pair; how many leaves are included in one product item IKN-010; whether the price is indicated for one leaf or for the set; what is the full size of the closed pair; what clear opening is required for installation; what hardware is included in the delivery; how the quantity and composition of the set will be recorded in the invoice and specification. Material: ________. Grinding quality: ________. Preparation for finishing: ________.

After the response, this wording needs to be turned into a final specification without blank spaces.

How the line in the invoice should look after confirmation

Universal form:

Carved gates IKN-010 — 1 set; composition: ________ leaves; size of one leaf: ________; full dimension of the closed pair: ________; material: ________; grinding quality: ________; preparation: ________; hardware: ________.

If the manufacturer confirms a different format for the unit of sale, the line is changed to match the actual response.

The meaning is not

Pair symmetry: why two wooden doors should be accepted as a single set

Even after the quantity issue is resolved, the quality of the pair remains. The Royal Doors are not perceived as two independent panels. They are read simultaneously, converge on the central axis, and form a single design.

Therefore, pairing is important during acceptance.

For beech under enamel, first compare geometry, relief, degree of sanding, and surface preparation. The natural wood grain will not be the main factor after an opaque coating, but differences in relief or treatment can show up in side light.

For oak with a finish that keeps the wood visible, an additional task arises: the two doors must be perceived as a deliberate pair in terms of material character. Natural wood never has to be mirror-identical, and that is exactly what makes it alive. But the contrast between the doors should not look as if the pieces were randomly taken from two different projects.

Upon receipt, lay both doors side by side in the position in which they will be installed. Look not only at the front carving. Compare:

• total height;

• the actual width;

• thickness;

• position of the central joint;

• the height of repeating ornamental motifs;

• the distances from the edge to the carved elements;

• uniformity of edge preparation;

• surface condition;

• material and marking.

If the set arrives before finishing, it is useful to take photos of the pair under the same lighting. They will be useful to the painter and designer as a control before the next work begins.

The meaning is simple: "two leaves" in the invoice is not yet a guarantee of a visual pair. The pairing must be maintained all the way from manufacturing to installation.

Acceptance before painting: what to check while the carved gates can still be assessed in their original state

A carved product for enamel is best handed over to the painting workshop as quickly as possible. But the finish coating is a boundary after which part of the original information becomes harder to assess.

First, check compliance with the order.

On each leaf, the article number, selected material, and sanding quality must match. Then the main dimensions are measured. Here it is especially important to use the size breakdown 470 × 1570 × 23 mm already received from STAVROS: you must know exactly which values you are comparing and with which unit.

Next, the central pair is checked. The leaves are folded into the closed position without forced tightening, and the pattern alignment is observed. At this stage, you do not need to independently select mounting gaps unless they are approved by the project. The task is to ensure that the received parts match the agreed documentation.

The areas for future hardware are inspected separately. If the mounting seats or preparation for hinges were part of the order, their position is compared with the drawing. If the hardware is selected separately, the axes and opening direction are checked again before drilling.

Before painting, it is also useful to:

• photograph the front and back sides;

• label the left and right leaf in the working documentation;

• do not swap them without checking;

• keep the packaging marking until acceptance is completed;

• do not trim until the geometry of the pair is confirmed;

• do not start drilling from memory or based on a similar project.

This order protects not only the client. The painter and installer receive a product for which all organizational issues have already been resolved, and they are not forced to decide on site which leaf is "seemingly left."

Clean opening: which values cannot be mixed in one number

The client often says: "Our opening is 940 mm." The designer replies: "Then two leaves of 470 mm each." For IKN-010, such arithmetic is currently dangerous because it is unknown whether 470 mm refers to one leaf.

But even after the official response, the width of the opening does not reduce to a simple addition.

It is convenient to divide the calculation into notations without substituting unconfirmed numbers:

W₁ — width of the left leaf;

W₂ — width of the right leaf;

Gц — structural gap or overlap in the central zone;

Gл and Gп — side installation gaps;

Wпары — actual overall dimension of the closed pair;

Wпроёма — required clear width between fixed elements.

The relationship between these values is determined by the design. The formula cannot be imposed without understanding the central node and hinges. But the notation system itself is useful: it does not allow calling four different quantities by one word "width".

The same applies to height. There is the leaf height, the clear height of the opening, the bottom gap, and the top installation gap. If the card says B = 1570 mm, the designer must obtain confirmation of what exactly is measured by this number, and then tie it to the existing architecture.

For an object with an already completed iconostasis, take at least three width measurements and three height measurements. A few millimeters of unevenness may not be noticeable to the eye on an empty opening, but it can become apparent after installing two symmetrical carved pieces.

Replacing only one leaf: a separate task, not half of a regular order

Damage to one leaf does not mean it is enough to order "0.5 set" or set the quantity to "1" without explanation. In an existing iconostasis, the new part must match the old one in a much larger number of parameters.

You need to measure the surviving leaf, not just the opening. Measure the width, height, thickness, hinge position, geometry of the central joint, and location of the main carving nodes. If an old drawing is preserved, it is compared with the actual state.

For oak, the issue of finish age is added. New wood and old coating can differ noticeably. For beech under enamel, the wood grain pattern is less noticeable, but you have to match the shade, gloss, and surface condition.

The main commercial question to the manager in this case is different: can one IKN-010 leaf be ordered separately, and based on what data will its compatibility with the existing second leaf be ensured.

Before answering, it cannot be assumed that a single sale is automatically possible. Even if the product page allows selecting quantity "1", this does not prove that one unit equals one leaf.

If the manufacturer recommends making a new pair, this may be related not to a desire to increase the order volume, but to the need to ensure compatibility and symmetry. The decision is evaluated based on the specific object.

Packaging, transportation, and delivery to the site: completeness must be counted even after payment

After the invoice is paid, the question "how many leaves are in one item" does not disappear. It becomes a question of delivery acceptance.

Before shipping, it is useful to know the number of cargo pieces and understand how the parts are marked. If the set consists of two leaves, the transport document may list one or several pieces — this is a logistics characteristic, not a unit of goods. They should not be mixed.

At the site, assign a person who accepts the product according to the specification. They should have not only the order number but also the assembly table in front of them.

Upon receipt, check:

• number of cargo units;

• presence of all leaves;

• marking;

• absence of visible damage to the packaging;

• compliance of the material;

• compliance with the agreed configuration;

• presence of separately confirmed components.

If the packaging consists of several pieces, they should not be spread across different rooms until the full check is complete. For a pair, it is important to maintain the connection between parts.

Further, the gates are stored in a way that excludes accidental mechanical impact on the carved relief. Specific storage conditions depend on the manufacturer's recommendations and the finishing stage; the article should not invent temperature or humidity conditions. The practical meaning is one: the carved set must reach the painter and installer in the condition in which it was accepted.

Pair finishing: a control sample decides more than the color name

Even if the order states "under enamel," the painting specification is not ready yet. The color name does not describe the gloss, primer system, or final perception of the carving.

For two leaves, it is better to make a control sample on wood of the same type or on an agreed test piece. It is evaluated not only from the front. Carving lives in side light: the same color on a flat surface and in deep shadows is perceived differently.

In a temple space, lighting also changes. Daylight, warm lamps, and local accent lighting can reveal enamel or tinting differently. Therefore, the sample is checked next to neighboring columns, baguettes, and icon frames.

If the order is assembled in one batch, it is useful to agree on a single finishing standard for the entire central group. Then requests like "order wooden royal doors," "order capitals for the iconostasis," and "order wooden baguette for the iconostasis" turn not into scattered purchases, but into linked items of one project.

Particular care is needed with golden, white, and dark coatings: on carved relief, any difference in gloss level shows more strongly than on a smooth wall surface.

What the installer should check on installation day

Installation is not the place to first determine the size of the pair. By this point, the main questions are already resolved. On site, it remains to confirm that the actual opening matches the latest measurement and nothing has changed after finishing work.

Before installation, compare:

• clear width;

• clear height;

• floor level;

• position of adjacent columns;

• projection of capitals and bases;

• readiness of attachment zones;

• marking of left and right leaves;

• model and position of hardware;

• opening trajectory.

A separate check is needed after the final coating. The thickness of the decorative layer is small, but the paint must not hide or obstruct the pre-prepared mounting seats.

The installer must receive the same drawing that was used to confirm the order. If an old version printout is lying on site, that is a reason to stop and verify the documents, not to "fit in place" an expensive carved part.

After hanging, not only mechanical work is assessed. In the closed position, the central axis, symmetry, height of lower edges, and the connection of the pattern of the two leaves are examined. In the open position, free movement and absence of contact with adjacent decor are checked.

FAQ: questions about carved gates IKN-010 before ordering

Is 470 mm the width of one leaf of IKN-010?

The card does not clarify this directly. Before payment, you need to get written confirmation of which part of the structure the 470 mm size refers to.

Is 470 mm the width of the entire pair?

This also cannot be stated based on the card. A confirmed full size of the closed pair is needed.

How many leaves are included in one product item IKN-010?

The description uses the phrase "pair of gates," but the commercial line does not clarify the composition of the sales unit. The number of leaves needs to be confirmed with STAVROS.

If I need two leaves, should I set the quantity to "2" in the cart?

Do not do this before clarification. If quantity "1" already means a pair, "2" may mean two sets.

Is the price of IKN-010 indicated per one leaf or per pair?

The card shows one price for one product item, but does not clearly explain the composition of that item. Clarify the unit of price before payment.

What size of IKN-010 is confirmed?

The card shows 470 × 1570 × 23 mm. The disputed point is not the value itself, but whether the width refers to one sash or a pair.

What wood is IKN-010 made from?

Beech and oak are available in the card.

What to choose — beech or oak?

The choice is linked to the future finish and the overall iconostasis system. For opaque painting, preparation for enamel is important; for a project with visible wood, the material of adjacent parts is especially significant.

Does IKN-010 have a "Prestige" sanding option?

Yes, the card shows "Standard" and "Prestige" options.

What does "under enamel" mean?

This is preparation of the product for opaque finishing, not a ready color.

Can IKN-010 be ordered to fit an existing opening?

First, you need to compare the actual opening with the confirmed dimensions of the leaves and the full pair. For a non-standard situation, separate approval will be required.

What opening dimensions should be provided?

Width and height need to be measured at several points, and you should also show the thickness of the installation zone, adjacent columns, bases, capitals, and the opening trajectory.

Do I need to provide photographs?

Yes, photos from the front and side abutments help link the numbers to the actual structure.

Is the hardware included in IKN-010?

The card in the provided information does not give sufficient basis to list the hardware set. This issue needs to be separately confirmed.

Are hinges included?

Hinges should not be considered included without written confirmation of the configuration.

Can I buy one leaf separately?

The possibility of ordering a single leaf separately must be coordinated with STAVROS. It cannot be removed from the quantity in the cart.

Can two different wood species be ordered for a pair?

For a standard project, this would create a visually and technologically heterogeneous set. The material for both leaves should be fixed as uniform, unless otherwise specifically provided by the project.

Can I choose "Standard" for one leaf and "Prestige" for the other?

For a pair, this is irrational: adjacent surfaces should preferably be obtained with the same degree of preparation.

Do capitals need to be coordinated together with the gates?

Yes, if the capitals are located near the central opening. Their protrusion must be checked against the trajectory of the leaves.

Will any wooden molding work next to IKN-010?

No. The profile, ornament scale, and protrusion should be coordinated on the overall facade and section.

Can IKN-010 be purchased separately from the entire iconostasis?

The card allows you to create a separate product item, but for actual installation you still need to check its compatibility with the existing opening and adjacent decor.

Why is there no exact current price in the article?

Because the main issue is not the number of rubles, but the unit to which this price refers. The current price should be checked in the card before ordering.

How to record IKN-010 in the project before confirming the configuration?

You can specify the article number and size with a note "product item composition and full dimensions of the pair to be confirmed with the manufacturer." After the response, the note is replaced with exact data.

What to do if the invoice contains only "IKN-010 — 1 pc."?

Ask to add a breakdown: what is included in one piece, how many panels, what are the dimensions of each, and the full size of the pair.

Do I need to keep correspondence with the manager?

Yes. For a custom-made product, it is useful to keep written confirmation of the configuration along with the invoice and drawing.

Can the number of panels be determined from a photo?

The photo shows the appearance but is not a sufficient document for the sales unit and configuration.

What additional elements are best to select at the same time?

If the project includes columns, capitals, baguettes, and other iconostasis details, it is more convenient to consolidate them on one facade and coordinate before phased purchasing.

Where can I view other carved gates?

In the specialized section, you can buy royal doors after comparing available options and sizes.

Where can I select adjacent church decor?

For a comprehensive project, you can buy wooden church decor and compare the gates with columns, capitals, crosses, and other elements of the category.

Where can I select a baguette?

After the facade is approved, you can Buy wooden picture frame molding with a suitable profile and ornament.

Where to select capitals?

After checking the side zones of the opening and the opening of the sashes, you can capital to buy for the selected column or pilaster.

Final specification: what should be known before payment

For IKN-010, it is not enough to know a beautiful article number and three sizes. Before payment, all lines must be filled in:

Until the empty lines are filled, the specification is not ready.

One line in the invoice should describe two leaves without guesswork.

Therefore, a professional buyer does not choose between two guesses. They receive written confirmation.

Therefore, a professional buyer does not choose between two guesses. He gets written confirmation.

Before payment, the documents must specify: the number of leaves, the size of each leaf, the full size of the closed pair, the required clear opening, material, sanding, preparation, hardware, and the meaning of the quantity "1". Only after this does the phrase "buy IKN-010" turn from a search query into a precise production task.

For a complex iconostasis, STAVROS allows linking the central carved gates with church decor, wooden baguette, and capitals in one system. But even with a ready catalog model, the main principle remains the same: first an unambiguous specification, then the invoice and payment. A complex double-leaf product should not have a single digit whose meaning project participants interpret differently.