The children's dresser is already painted: how to buy wooden handles Flower HL-043 without coating and not order fasteners a second time

The dresser is already assembled, the fronts are painted, the shade is approved, and the painting work is closed. Only after this does it turn out that the handles have not been ordered yet. In the catalog, Flower HL-043 is selected — a wooden knob handle in the shape of a flower. At this stage, it is especially easy to make two opposite mistakes: expecting that the handle will arrive already in the color of the finished front, and at the same time adding separate fasteners "just in case" to the cart.

The Flower HL-043 card says directly: the handle is supplied unpainted, and the mounting kit is already included in the price. That is, after receiving, there remains a separate task of finishing the handles, but there is no need to automatically buy a second set of screws. Nearby, STAVROS shows FUR-032 and FUR-033 — these are decorative metal caps for the visible screw head, not mandatory duplicates of the standard fasteners.

For a finished painted dresser, the correct sequence is: choose the Flower material → determine the color and gloss of the handle → test one control handle on the actual front → check the included fasteners against the thickness of the door or drawer → decide whether a metal cap is needed → only then order the entire batch and perform installation.

Go to Catalog

Wooden furniture handle Flower HL-043: what will actually arrive in the order

Flower HL-043 is a knob handle made of solid wood. As of September 9, 2026, the current card confirms:

Parameter	Flower HL-043
Size A × B × C × D	55 × 54 × 27 × 20 mm
Type	Knob handle
Material	Beech / Oak
Sanding	Prestige
Selected beech	For enamel
Ready-made coating	no, the handle is supplied unpainted
Mounting	The kit is included in the price
Beech	1,430 RUB, St. Petersburg — 12 pcs.
Oak	1,530 RUB, Saint Petersburg — 44 pcs.
If present	shipment from warehouse within 3 business days
Custom Order	Average time 5–10 days

If the model has already been selected by form, buy the wooden handle Flower HL-043 it is better after two separate things are clear: what its finish will be and whether the standard fasteners fit the actual thickness of the finished facade.

"Under enamel" for Flower HL-043 is not a white handle

Line:

Beech / Prestige / Under enamel

may look as if the product is already painted with white or other enamel. This is not the case.

"Under enamel" describes the preparation of wood for subsequent opaque finishing. The Flower card separately clarifies that the handle is supplied unpainted.

Therefore, after receiving the beech HL-043, the buyer should not expect a finished facade color.

Correct entry:

Flower HL-043 / beech / Prestige / Under enamel / unpainted / finish to be done separately.

Before ordering, you can verify what this means quality of Prestige sanding and preparation for enamel, so that the painter and the buyer understand the condition of the blank equally.

Our factory also produces:

View Full Product Catalog

The dresser is already painted: who is now responsible for the color of the handles

When handles are ordered before furniture painting, they can be included in the same painting cycle as the facades. This point has already been missed here.

Now Flower becomes an independent small batch.

Before ordering, you need to decide:

• the handle will match the facade color or be contrasting;
• whether the control sample of the approved color has been preserved;
• whether there is a remainder of the same coating system;
• who will paint the handles;
• what gloss is needed;
• will there be first one trial Flower or the whole batch at once.

If the task is — buy handles for the dresser only after the furniture is completed, agreeing on the finish becomes the first new action. The facade itself does not need to be repainted for the handles, but the color of the handles cannot be left as "approximately the same."

The same paint code does not guarantee visual matching without a sample

Even if the exact enamel number is known, the handle and the facade may perceive the finish slightly differently.

The reasons are practical:

• the handle has a three-dimensional floral relief;
• light falls on the petals at different angles;
• the facade has already dried and is in use;
• a new coat of coating may be applied in a different way;
• the degree of gloss strongly affects the visual match.

Therefore, for an expensive finished dresser, it is reasonable to first paint one control Flower.

After complete drying, it is applied to the facade and viewed in daylight and room lighting, frontally and at an angle. If the result is approved, the parameters of this sample are transferred to the entire batch.

An unpainted knob handle after the finished facade: a separate finishing cycle

Handles can no longer simply be "added" to completed furniture production retroactively.

For the Flower batch, its own short route appears:

acceptance → sanding inspection → trial finish → color/gloss approval → painting of the entire batch → coating curing → installation.

The specific primer, enamel, varnish, and interlayer technology are chosen by the contractor according to their material system.

For the buyer, it is more important that the following are recorded in the order and in the painter's task:

Flower HL-043 / material / preparation / color / gloss / quantity.

Otherwise, one side expects a matte handle, another paints in semi-gloss, and the mistake is discovered only after the batch is finished.

Beech or oak for Flower HL-043: choose together with the future finish

The card offers beech and oak. But this material cannot be chosen just by the principle "oak is more expensive — so it's better."

If Flower must become fully opaque and match the painted dresser, the beech configuration "Under enamel" has clear logic.

If the designer wants to preserve the visible wood texture and make the handle contrasting, the material and finishing method need to be coordinated separately.

The oak option in the card is currently only:

1 530 − 1 430 = 100 ₽

more expensive than the beech one per handle.

If the dresser needs six handles, the difference in the items themselves will be:

6 × 100 = 600 ₽.

But choosing oak just because of a small price difference is pointless if the entire project requires a covering solid-color finish.

Flower HL-043 fastening is already included in the price

This is a central purchasing fact.

The card states:

"The mounting kit is included in the price."

So, the standard furniture estimate line:

handles + separate fastening

cannot be automatically copied into the Flower order.

Otherwise, you might easily buy a second pack of screws that won't be needed at all.

It's more correct to write:

Flower HL-043 — ___ pcs.; the mounting kit from the card is included in the price — verify the composition and length against the facade.

However, one must not go to the other extreme and assume that the standard set fits any door or drawer.

"Fasteners included" does not mean "fits any facade thickness"

A ready-made children's dresser already has a specific facade thickness.

Before the first hole, you need to find out:

• the actual thickness of the door or drawer front panel;
• what exactly is included in the Flower set;
• the number of fasteners per handle;
• the screw length;
• the head type;
• whether there is a washer or another part;
• is the thread length sufficient for a specific facade;
• does the screw not turn out to be too long.

The article does not assign a universal screw length: the card confirms the presence of a mounting kit, but does not turn all furniture facades into one type.

This is especially important after painting: correcting a mistakenly drilled hole on finished enamel is much more unpleasant than checking the fastener in advance.

FUR-032 and FUR-033 are decorative caps, not a second set of fasteners

Next to Flower HL-043, the card shows two recommended positions:

FUR-032 — antique bronze;

FUR-033 — nickel.

The current cards for both caps as of September 9, 2026 confirm the same size 14 × 14 × 3 mm and a price of 59 ₽/pc. They are designed for an M4 screw with a semi-circular head and cover its visible cap.

That is, the buyer needs to distinguish three entities:

What	Role
Flower HL-043	the wooden handle itself
Flower mounting kit	standard mounting, already included in the price
FUR-032 / FUR-033	separate decorative cap for the screw head

Therefore decorative cap FUR-032 antique bronze и decorative cap FUR-033 nickel are added only when the project really needs such a visible metal element and compatibility with the actual fastening assembly is confirmed.

Do not buy FUR-032 and FUR-033 at the same time just because both are recommended

Both caps serve the same decorative function but differ in color.

FUR-032 gives a warm antique bronze tone. FUR-033 is cold nickel.

If an intentional mix of metals is not planned on one children's dresser, usually one option is chosen.

Before ordering, it is useful to look at what metal parts are already nearby: hinges, legs, decorative screws, lamps, and other hardware in the room.

A cap is a small part, but on solid-colored painted furniture it can be a noticeable accent.

It may turn out that a decorative cap is not needed at all.

The presence of FUR-032/FUR-033 in the recommended hardware does not mean it is mandatory to purchase.

In a specific scheme, the screw head may be on the inner side, hidden by the structure, or simply not visually bother the customer.

Therefore, before adding a cap, you need to answer one question:

what fasteners will be visible after the actual installation of Flower on this particular facade?

If the metal head does not remain in the visible area, a separate decorative cap may not solve any problem.

Push-button handle 55×54×27×20 mm: what to check on the finished facade before drilling

Flower has four published sizes A/B/C/D: 55×54×27×20 mm. But without a drawing, you should not independently assign mounting meaning to each letter beyond what the card shows.

Before the hole, check:

• Flower drawing;
• physical sample, if available;
• facade thickness;
• position of internal hardware;
• distance to the edge;
• presence of a frame or milling;
• center of the future hole;
• actual fasteners.

Pay special attention to checking the back side of the drawer: at the intended drilling point, there must not unexpectedly be an internal crossbar, guide fastener, or other structural element.

The flower has a decorative center, and installation requires an exact coordinate.

For a series of drawers, it is not enough to say:

"place the Flower in the center."

A coordinate system needs to be recorded.

For example, for a facade with a width of W the geometric center horizontally:

X = W ÷ 2.

For the height H:

Y = H ÷ 2.

But the designer may deliberately shift the handle relative to the geometric center due to a frame, panel, or composition of several drawers.

Then the working note should look like this:

Flower hole center: X=___ mm from left edge, Y=___ mm from bottom edge.

This way, all drawers get the same marking, not a series of "almost identical" centers.

Do not drill the entire dresser at once using a single paper template.

The finished enamel is already applied, so the cost of a mistake is higher.

Practical sequence:

1. check one door or drawer;
2. attach the physical Flower;
3. assess the scale of 55×54 mm;
4. check the handle overhang;
5. verify the point against the back side of the facade;
6. make one test hole;
7. install one handle;
8. check the grip and appearance;
9. only after that mark the remaining facades.

This is not a mandatory STAVROS instruction, but a reasonable design safeguard for already finished furniture.

First one Flower, then the whole batch

If the dresser is expensive and the color can no longer be easily corrected, a control handle is useful in three roles at once.

Visual: a real flower 55×54 mm may look different than the image on the screen.

Painting: on one part, the color and gloss are approved.

Installation: on it, the actual mounting kit and facade thickness are checked.

After this, the order for the remaining handles no longer has three uncertainties.

If required buy wooden handles for a dressersuch a sequence is especially justified precisely at the stage when "the furniture is already ready".

How much will a batch of Flower HL-043 cost?

Price as of September 9, 2026:

beech — RUB 1,430/pc.;

oak — RUB 1,530/pc.

Examples based only on the cost of handles:

Quantity	Beech	Oak
4	5 720 ₽	6 120 ₽
6	8 580 ₽	9 180 ₽
8	11 440 ₽	12 240 ₽

Additional costs may arise separately for finishing, delivery, and, if the project requires, decorative caps.

If each of the six handles requires one FUR-032 or FUR-033 at RUB 59, that adds:

6 × 59 = 354 ₽.

But these RUB 354 should only be added to the estimate after confirming that the caps are indeed needed.

If handles are also needed for the wardrobe: do not automatically copy the solution from the dresser

In one children's room, Flower can be repeated on a dresser, wardrobe, nightstand, and desk.

This creates a good series, but each type of facade needs to be checked separately.

A handle that is comfortable on a small drawer is not necessarily as comfortable on a tall, heavy wardrobe door.

For a wardrobe, look at:

• grip height;
• weight and size of the door;
• position relative to the edge;
• opening of the adjacent panel;
• visual scale of the flower.

If, after trying it out, Flower fits both items, buy wooden furniture handles You can complete one color cycle in a single batch.

Materials for finishing handles are a separate line item; fasteners are no longer included.

If the dresser is finished, it makes sense to split the new estimate as follows:

Flower HL-043 — products;

finishing materials and labor — separately;

standard mounting kit — included in the cost of Flower;

FUR-032/FUR-033 — only if necessary.

If needed, materials can be viewed in the section materials for finishing wooden handles.

This way, the purchase no longer mixes four different concepts into one line item like "handles + paint + screws + caps."

What to write in the order so that the painter, furniture maker, and customer all understand the same thing

Working specification:

Flower HL-043 / 55×54×27×20 mm / material ___ / Prestige / preparation ___ / quantity ___ / handle unpainted / finish ___ / color ___ / gloss ___ / standard mounting kit included in price — verify composition / FUR-032 or FUR-033 — only if necessary / facade thickness ___ mm.

Additionally in the mounting sheet:

Facade	Center X	Center Y	Thickness	Flower	Plug
Box 1	___	___	___	HL-043	none / 032 / 033
Box 2	___	___	___	HL-043	none / 032 / 033
Drawer 3	___	___	___	HL-043	none / 032 / 033

This way the buyer knows what they are ordering; the painter knows what to paint; the furniture maker knows what and where to install.

If the holes in the dresser are already drilled for old handles

Sometimes handles are remembered late not only after painting, but also after drilling facades. For example, the furniture maker prepared the dresser for a different knob, and then the customer chose Flower HL-043.

In this case, first compare the existing hole with the actual mounting center of Flower according to the drawing and the physical part.

If the knob handle indeed uses a single mounting point and the existing hole falls within the required coordinate, this does not automatically mean compatibility. You need to check:

• hole diameter;
• the condition of the enamel around it;
• the length of the standard screw;
• facade thickness;
• whether the Flower base hides the old mark;
• whether a visible chipped edge remains.

If the old hole is in a different location, do not drill a second one "nearby" without a furniture maker's assessment. On a finished facade, two close holes can weaken the local area or leave a mark that Flower will not cover.

The correct order: drawing → fitting → checking the old hole → deciding on installation.

When painting Flower, the fastening area cannot be treated as an ordinary petal

The handle must properly connect with the fastening assembly after finishing. Therefore, the painter should be shown in advance which surfaces are decorative and which belong to installation.

Do not independently fill the hole, threaded part, or seating surface with a thick layer of enamel if it changes the geometry of the connection.

In the task for the painter, it is useful to separately write:

preserve the mounting geometry of Flower HL-043; do not alter the hole and seating areas with the coating layer without approval.

This is especially important with multiple layers of primer and enamel. Visually the difference may be small, but during assembly the screw already goes tight or the handle does not sit firmly on the facade.

After finishing, it is better to fully assemble one control handle with the standard kit outside the furniture to check that the coating does not interfere with the connection.

Acceptance of the painted batch: not only the color is checked

Before installing all Flower handles, lay them out side by side and compare them as a set.

Check:

• uniformity of shade;
• the same degree of gloss;
• absence of runs on the edges;
• readability of the floral relief;
• cleanliness of the mounting holes;
• absence of chips after finishing;
• matching quantity with facades;
• completeness of standard mounting kit.

If there are six handles, it is convenient to lay out six handles and six mounting kits in separate compartments before drilling the dresser.

This way, there is no situation where the first five drawers are assembled, and for the sixth one a screw is suddenly missing or a handle with a different level of gloss is found.

Is a spare Flower HL-043 needed

For a finished dresser, a spare is not mandatory, but it can be considered deliberately.

One extra handle makes sense if:

• the batch is painted in a non-standard color;
• it will be difficult to replicate the same shade after several years;
• the dresser is planned to be used for a long time;
• the handles are in active use by children;
• the customer wants to have a ready replacement without a new painting cycle.

If a spare is taken, it is better to paint it at the same time as the main batch. An unpainted spare Flower will not solve the problem of instant replacement after a few years: it will still have to be brought up to color.

But there is no need to buy a spare "just because it is customary." This is a separate decision regarding furniture use.

When not to order Flower HL-043 yet

It is better to postpone the purchase if:

• the actual color of the facade is not fixed;
• no sample or color swatch remains;
• no one is responsible for the finish of the handles;
• the thickness of the facade has not been checked;
• the composition of the standard mounting is unknown;
• the handle has not yet been tried at a scale of 55×54 mm;
• the drilling point conflicts with the internal structure of the drawer;
• FUR-032 and FUR-033 are added "just in case";
• the number of handles is still changing.

In these cases, the handle itself is aesthetically suitable, but the order is not yet technically ready.

Where to buy Flower HL-043 and alternative wooden handles

If Flower is already approved, the end point is the HL-043 card.

If a different type or a different scale is needed, Buy wooden furniture handles it can be from the general section.

If you need a product without factory finish for your own painting, use the category buy unpainted wooden handles.

Before sending the order, you can check payment and delivery terms for furniture handles, especially if the finishing will be done after receiving the product.

Main conclusion:

Flower HL-043 arrives unpainted, but the mounting hardware is already included in the price.

Therefore, after the finished painted dresser, you need to add a separate finishing cycle, not a second set of screws. FUR-032/FUR-033 are considered separately as a decorative solution for the visible M4 head, only if it is actually required by the project.

Questions before ordering Flower HL-043

What is the size of Flower HL-043?

55 × 54 × 27 × 20 mm.

What type of handle is this?

Knob handle.

What is it made of?

in beech or oak.

What sanding?

Prestige.

Does Flower HL-043 come already painted?

No. The card clearly states that the handle is supplied unpainted.

What does "under enamel" mean for beech?

Preparation of the wood for subsequent opaque finishing, not a finished color.

Is the fastening included in the price?

Yes. The card clearly indicates that the mounting kit is included in the price.

Do I need to buy separate screws?

Not automatically. First, you need to compare the contents of the standard kit and its applicability to the thickness of the specific facade.

What is FUR-032?

Decorative metal cap 14×14×3 mm in antique bronze color for an M4 screw with a semi-circular head.

What is FUR-033?

The same purpose plug 14×14×3 mm, but in nickel color.

Do I need to buy both plugs?

No. Usually one finish is chosen, or the plug is not used at all if it is not needed for the project.

How much does FUR-032 or FUR-033 cost?

59 ₽ per piece as of September 9, 2026.

How much does the Flower HL-043 made of beech cost?

1,430 ₽ at the time of checking.

How much does the oak Flower cost?

1 530 ₽.

Can I drill all drawers at once?

For finished painted furniture, it is safer to first test one control installation, then transfer the approved coordinate to the other fronts.

What should be checked last before payment?

Material, quantity, unpainted state, future color, front thickness, composition of the standard mounting, and the need for FUR-032/FUR-033.