Geometric figure KN-021

Geometric shape KN-021 is a large spherical element made of natural solid wood for assembling decorative partitions, open shelving, furniture posts, and spatial interior structures. The product size is 106 × 106 × 109 mm, the mounting hole size is 34 mm. KN-021 is made of beech or oak and is offered with "Prestige" sanding quality.

The main feature of KN-021 is the combination of a laconic rounded shape and two mounting directions located at an angle to each other. Thanks to this, the shape is convenient to use where it is necessary to change the direction of the wooden axis or visually design a corner connection of vertical and horizontal elements. Instead of a regular technical joint, a large wooden ball is obtained, which becomes a noticeable part of the design.

KN-021 is part of the system STAVROS wooden construction set. Geometric shapes, axes, and other solid wood parts can be combined with each other to create custom partitions, posts, shelving, and furniture compositions. This principle is convenient both for a ready-made interior project and for developing your own structure to fit the dimensions of a specific room.

Wooden ball KN-021 with corner connection

In terms of external shape, KN-021 looks like a large wooden ball. However, unlike a regular decorative sphere, it is a functional constructor element with prepared 34 mm mounting holes.

Two connection directions allow KN-021 to be used where a straight-line system needs to be turned at an angle. One wooden element can enter the ball from the top, the second from the side. As a result, the geometric shape visually unites two lines and forms a neat three-dimensional node.

This solution is especially interesting for interior structures consisting not only of parallel vertical posts. KN-021 allows introducing horizontal directions, forming corners, connecting individual parts of a shelving unit, and creating more complex spatial geometry.

At the same time, the node itself does not look technical. The spherical shape hides the rigidity of the intersection of straight elements, softens the composition, and allows the connection point to be perceived as a specially designed decorative accent.

KN-021 for decorative wooden partition

One of the main applications of the geometric shape is decorative wooden partitions.

A regular slatted partition is built on the repetition of vertical lines. This solution works well in a minimalist interior, but at a large width it can look too monotonous. The use of spheres, cubes, cones, and other shapes allows turning a row of posts into an individual composition.

KN-021 is especially useful in structures where vertical posts need to be complemented with horizontal elements. Thanks to the angular layout of the mounting holes, the sphere can visually frame the transition between two directions.

For example, a vertical axis runs from the top to KN-021, and a horizontal line continues from the side of the shape. The sphere itself becomes the point where the direction of the composition changes.

This allows creating much more interesting partitions than a regular row of parallel slats. Horizontal ties, short decorative crossbars, or elements extending to adjacent posts can be added to the structure.

As a result, the partition turns into a spatial geometric pattern.

Wooden partitions for a kitchen-living room

KN-021 is well suited for creating a partition between the kitchen and the living room.

In a combined space, it is often necessary to mark a functional boundary while preserving the overall light, volume, and visual connection between zones. An open wooden structure solves this task more softly than a solid wall.

Using KN-021 allows making the partition expressive from both sides. The sphere has a three-dimensional shape and is perceived equally organically from different points of the room.

If the interior is designed in a modern style, you can limit yourself to a few large geometric shapes. Place one KN-021 in the upper part of the structure, use the second one lower, and leave long sections of smooth wooden posts between them.

In a more complex project, the sphere can be combined with cubes and elongated shapes. Then each vertical gets its own pattern, but thanks to the same wood, the entire partition remains cohesive.

Beech execution is well suited for a light, calm kitchen-living room. Oak execution is for a space where natural oak is already present: floor, furniture, table, doors, or decorative panels.

For zoning a bedroom and an office

In the bedroom, a wooden partition with KN-021 can separate a walk-in closet, a work area, or a relaxation zone.

This solution is especially useful in a room with a single source of natural light. The open structure marks the boundary but does not block light and does not create a feeling of small isolated rooms.

In the office, wooden posts can be used to divide the workspace and library, meeting area, or rest area.

KN-021 allows adding a horizontal direction to such a structure. For example, a short horizontal element can extend from a vertical post through the sphere, connecting the composition with the adjacent part of the shelving.

Due to this, the partition can simultaneously perform a decorative and functional task.

KN-021 for open shelving

The geometric shape is suitable for open wooden shelving units where vertical posts combine with horizontal shelves and decorative crossbars.

In such a design, the ability to change direction is especially in demand.

A vertical wooden axis can be brought to the KN-021 from above, and a horizontal element can continue from the side opening. The result is a visually clean corner joint, accented with a large spherical piece.

Similar connections can be used at individual levels of the shelving unit, without repeating them in every section. This way, the KN-021 becomes a noticeable accent rather than a background element.

A large sphere about 10 cm in size reads well next to shelves and long posts. Therefore, it does not need to be installed too frequently.

In a medium-width shelving unit, a few KN-021s distributed at different heights are sufficient. In a large composition, they can be alternated with other geometric shapes.

Such a shelving unit is suitable for books, ceramics, vases, decorative objects, collections, and small works of art. In a store or showroom, it can be used to display products.

Room divider shelving with KN-021

The room divider shelving option is especially interesting, where open storage is combined with space zoning.

Vertical wooden posts form the main frame. Horizontal shelves create functional levels. KN-021 and other geometric shapes make the system visually expressive.

Such a structure can be placed along a wall or extend into the room space.

In a living room, it can separate the sofa and dining areas. In a studio, it can partition off the sleeping area. In a study, it can form a library while also marking the work zone.

KN-021 is useful precisely in areas where the vertical direction needs to be connected with the horizontal. Instead of a mechanical joint, a large rounded element appears that deliberately emphasizes the node.

When using several such points, a unified rhythm emerges that ties the entire shelving unit together.

Mounting size 34 mm

For KN-021, the mounting dimension D is specified as 34 mm. It must be taken into account when selecting mating parts for the wooden construction set.

The mounting size is especially important in custom design. The designer can determine in advance not only the external dimensions of the shape but also its compatibility with other elements of the system.

Before ordering, it is advisable to draw up a diagram of the future structure and determine:

• number of vertical posts;

• position of horizontal elements;

• points of direction change;

• placement of KN-021;

• number of other geometric shapes;

• distance between large decorative elements;

• total height and width of the structure.

KN-021 has a fairly large external size, so the shape needs to be considered at the scale of the entire project. On the drawing, the sphere may seem small, but in a real interior, a volume of about 106 mm becomes a noticeable decorative accent.

How KN-021 differs from a regular wooden sphere

If you just need a wooden sphere for decoration, you can use a regular turned blank. But for an interior structure, this is often not enough.

You need to independently determine the location of holes, their size, direction, and compatibility with other parts.

KN-021 is initially part of a modular construction system. The product already has defined:

dimensions — 106 × 106 × 109 mm;
mounting size — 34 mm;
material — beech or oak;
Sanding quality — "Prestige".

Moreover, the configuration of the holes itself is designed to change the direction of the connection.

Therefore, KN-021 is advisable to use where you need not just a decorative wooden ball, but a ready-made geometric element for a real prefabricated structure.

KN-021 made of solid beech

The beech geometric shape KN-021 is suitable for interiors where a calm natural texture and clean geometry are required.

Beech has a fairly uniform wood grain, so on a spherical surface the volume of the product remains the main feature. This is useful in structures where several types of shapes are used at once and too active a texture could overload the composition.

Light beech goes well with:

• neutral walls;

• light natural wood;

• stone;

• glass;

• metal;

• natural textiles;

• modern minimalist furniture.

From beech, you can assemble a lightweight partition from floor to ceiling, which will not look heavy even with a large number of vertical elements.

Beech KN-021 can also be used in projects that involve subsequent decorative finishing in a common system with racks, shelves, and other shapes.

KN-021 made of solid oak

Oak KN-021 features a more pronounced natural texture.

On a spherical surface, the oak pattern is perceived especially interestingly. The fibers run along the rounded volume, and the direction of the texture changes with the shape of the part.

If the surface retains the look of natural wood, the sphere becomes decorative not only due to its geometry, but also due to the texture of the material.

Oak is well suited for interiors where the following are already present:

• oak parquet;

• solid or veneered furniture;

• oak doors;

• wall panels;

• wooden countertops;

• other elements made of natural oak.

In such a space, KN-021 helps connect a new partition or shelving unit with the existing finish.

Oak also works well with natural stone, matte metal, glass, and decorative plaster.

If you need to order a wooden oak sphere for a partition or shelving unit, KN-021 allows you to obtain a ready-made geometric part with known parameters, rather than developing a complex joint separately.

Line rotation as part of the design

One of the most interesting capabilities of KN-021 is using line rotation as a decorative technique.

Usually, changes in direction within a wooden structure are made as inconspicuous as possible. Here, you can do the opposite: deliberately emphasize the transition point with a large spherical shape.

For example, a vertical post approaches the sphere from above, after which the line continues in a horizontal direction. The eye reads this transition immediately, but thanks to the smooth form of KN-021, it looks natural.

If you repeat a similar technique several times, you can form a complex pattern of vertical and horizontal fragments.

This is especially interesting for modern furniture and interior objects, where constructive logic becomes part of the appearance.

Combination of KN-021 with cubic shapes

A sphere and a cube are one of the most expressive combinations within a wooden construction set.

KN-021 creates a smooth rounded volume. A cubic shape, in contrast, is built on flat planes and angles.

If you place these elements on adjacent posts, a clear geometric contrast appears.

For example:

on the first vertical — KN-021 with a transition to the horizontal direction;

the second uses a wooden cube;

on the third — an elongated turned shape;

on the fourth — a smooth post.

Such a module can be repeated across the width of the structure or freely modified.

As a result, the partition looks more complex than a regular slat filling, but retains a modern minimalism.

Combination with elongated and conical elements

A round element is well complemented by elongated, conical, and diamond-shaped figures.

KN-021 creates a large focal point where the eye lingers. The elongated element emphasizes the direction of the post and helps connect several levels of the composition.

For a tall partition, you can use a sphere at the top of one vertical, an elongated element in the center of another, and a small cube lower down on a third.

The main thing is not to place all large elements too close to each other.

Smooth sections of wooden axes are necessary as visual pauses. It is they that allow geometric shapes to remain expressive.

Additional shapes for such a composition can be selected in the section «Constructor» STAVROS.

KN-021 for designer furniture

A geometric shape can be used not only in interior partitions.

KN-021 is suitable for custom furniture where an expressive connection of two directions of a wooden structure is required.

These can be:

• open shelving units;

• console;

• decorative posts;

• bookcases;

• display cases;

• furniture frames;

• interior compositions made of solid wood.

In such furniture, the ball can become one of the main characteristic details.

For example, a vertical support reaches KN-021, after which a short horizontal element extends from it, supporting the overall geometric theme of the piece.

The simple spherical shape makes such a detail quite versatile. It does not tie the furniture to a specific ornament or historical style.

For furniture and joinery workshops

KN-021 is also convenient from a production standpoint.

Instead of individually manufacturing each spherical joint, the craftsman receives a ready-made geometric shape with specific dimensions and a mounting parameter.

This is especially useful when manufacturing:

• several identical shelving units;

• a series of decorative stands;

• a large partition;

• repeating furniture modules;

• commercial interior structures.

At the same time, using a ready-made part does not make the final item standard.

The craftsman independently determines the placement of KN-021, the length of the connecting elements, the combination with other shapes, and the overall pattern.

The same ball can be used in completely different ways in different projects.

KN-021 for designers and architects

It is important for a designer to understand in advance the real dimensions of each noticeable element.

KN-021 can be immediately incorporated into a drawing as a shape measuring 106 × 106 × 109 mm with a mounting size of 34 mm.

This allows you to correctly determine:

• installation height;

• the distance to the wall;

• position relative to shelves;

• the distance between adjacent posts;

• the direction of mating elements;

• the number of balls in the composition.

This approach is much more convenient than first creating a visualization with conditional geometric shapes and then finding a way to manufacture them in real sizes.

In the case of KN-021, the project is built around an already understood product.

Size 106 × 106 × 109 mm in the interior

Main model parameters:

A — 106 mm
B — 106 mm
C — 109 mm
D — 34 mm.

The size of about 10 cm makes KN-021 a large decorative element.

In a small furniture structure, one ball may be enough. In a wide partition or a large shelving unit, several pieces can be used, but it is advisable to distribute them across different areas.

Do not automatically install KN-021 on every vertical. Too many identical large balls can make the composition heavy and predictable.

It is much more interesting to use the figure as an accent and alternate it with other elements.

How to distribute KN-021 in a large structure

For a wide partition, several types of posts can be developed.

For example:

first post — KN-021 at the top with a horizontal branch;

second post — a cubic element in the center;

third rack — elongated figure;

fourth rack — almost smooth;

fifth rack — another KN-021, but lower.

This creates a rhythm without mechanical repetition.

If the interior requires order and symmetry, paired placement can be used. Two KN-021 units are positioned mirror-symmetrically relative to the center of the structure and connected with horizontal elements.

For a long shelving unit, one module can be designed and repeated at a certain interval.

«Prestige» sanding quality

For KN-021, the "Prestige" sanding quality is provided.

Rounded geometry is especially demanding on the surface condition. Light passes smoothly over the sphere, so the shape well demonstrates the quality of wood processing.

The prepared surface allows KN-021 to be included in the overall finishing system of the project.

If it is necessary to preserve the natural texture of solid wood, a finish that highlights the wood is chosen. If the structure must match a specific color scheme, all its parts can be finished together.

Uniformity is especially important when using several elements made of beech or oak. The sphere, posts, shelves, and other geometric shapes should be perceived as parts of one product.

Modern geometry instead of intricate ornamentation

KN-021 is suitable for interiors where decorativeness is built not on carving, but on form, proportions, and natural material.

The sphere itself is very laconic. However, in combination with a straight wooden axis, it creates an expressive contrast.

The sphere works even more interestingly at the pivot point: a vertical line meets a horizontal one, and a rounded volume appears between them.

This solution looks modern and at the same time preserves the natural warmth of solid wood.

KN-021 pairs well with smooth walls, stone, glass, metal, and simple furniture without complex facade decor.

Buy wooden sphere KN-021 with 34 mm holes

The geometric shape KN-021 is suitable if you need to buy a wooden sphere with 34 mm holes, a corner geometric element for a partition, a decorative node for a furniture post, or a part for an open shelving unit.

This is not just a wooden sphere for decor. KN-021 is designed to be integrated into a system and allows you to design the transition between two directions of the structure.

The figure can be used:

• in a decorative partition;

• in a wooden shelving unit;

• in a shelving-partition;

• in a furniture stand;

• in custom furniture;

• in a spatial composition;

• in combination with other construction set elements.

The size of 106 × 106 × 109 mm makes the ball a noticeable interior accent, and the mounting size of 34 mm allows it to be considered when selecting compatible parts.

Buy KN-021 in beech or oak

The choice of material depends on the nature of the project.

KN-021 in beech should be considered for a light, calm composition with a fairly uniform wood texture. Beech is well suited for modern furniture and light decorative partitions.

KN-021 in oak is chosen when it is necessary to emphasize the natural texture of the wood. On a rounded surface, the oak grain becomes an additional decorative element.

If the entire structure is made from a single wood species, it is advisable to immediately select the main geometric parts in the corresponding material.

This makes it easier to achieve a cohesive result and coordinate the further finishing of all elements.

Order KN-021 and other constructor elements made from solid wood

KN-021 is convenient to use together with other elements of the STAVROS wooden constructor.

When developing an individual composition, first determine its main vertical and horizontal lines. Then mark the places where the direction changes and where a large accent is required. It is at such points that KN-021 reveals its capabilities most fully.

After that, you can select cubic, elongated, and other rounded parts.

The result is not a set of random decorations, but a well-thought-out system where each shape has its place and supports the overall geometry.

This approach is suitable for private interiors, professional designer work, carpentry workshops, and custom furniture making.

Characteristics of the geometric shape KN-021

• Article: KN-021.

• Product type: geometric figure, spherical element of a wooden construction set.

• Size A: 106 mm.

• Size B: 106 mm.

• Size C: 109 mm.

• Mounting size D: 34 mm.

• Material: beech or oak.

• Sanding quality: "Prestige".

• Purpose: decorative partitions, open shelving, furniture stands, custom furniture, and spatial interior structures.

• Feature: two mounting directions for forming a corner joint in the structure.

Geometric shape KN-021 — a wooden corner element for a custom project

KN-021 is worth choosing when a regular straight element is not enough and the structure needs not only decoration but also a visual change in its direction.

The large rounded shape measuring 106 × 106 × 109 mm turns the connection point into a noticeable part of the interior. The 34 mm mounting holes allow the shape to be used in a system of compatible parts, and the two directions enable building more complex geometry from vertical and horizontal elements.

In a partition, KN-021 helps move away from a monotonous row of parallel posts. In shelving, it helps design the transition between vertical and horizontal. In furniture, it creates a distinctive decorative joint without complex carving or custom-made spheres.

Beech suits a calm and light composition, while oak is for projects where the natural wood texture needs to be emphasized.

If you need to buy a wooden sphere with angled holes, order solid wood elements for a decorative partition, select a part for shelving, or assemble custom furniture from ready-made modules, KN-021 can be used as one of the key volumetric elements STAVROS wooden construction set.