Carved molding tip N-402.1L set for MLD-004

There are details that go unnoticed in the work — but are immediately noticeable in their absence. The molding frame is built, corner elements are covered, the profile is clearly visible along the perimeter — and suddenly the eye rests on an open molding strip end. A raw cut. An unfinished edge. A small but annoying incompleteness that instantly devalues all the work done. This is exactly what thecarved molding tip N-402.1L— a compact, precise, carved finishing element made of solid beech or oak, created as a set for moldingMLD-004.

Size — 63 × 29 × 13 mm. Material — natural wood: beech or oak. Finishes — Standard and Under enamel. This detail doesn't draw attention to itself — it makes everything around it better. The molding end is closed, the frame edge gains a neat point, the facade reads as complete. It's precisely such small things that distinguish professional results from amateur ones.Buy carved tip N-402.1L— means putting the final touch where the system requires completion.

What is a molding tip and why is it rarely discussed but always noticed

In furniture and interior decor, much is said about moldings, corner overlays, central ornaments. About tips — almost never. Meanwhile, the tip is precisely the final word of the system. Everything that came before it: profiles, corners, overlays — is the sentence. The tip — is the period at the end.

Any molding line that doesn't end with a decorative finish looks incomplete. Architecturally, this is especially noticeable: the molding profile creates movement — horizontal, vertical, framing. This movement must have a beginning and an end. The beginning is set by corner elements. The end — is the tip.

wooden tip for moldingThe N-402.1L is precisely such an 'end.' Compact in size, expressive in form, precise in execution. It caps the end of a molding strip with a decorative carved shape, making the edge of the system artistically meaningful—not merely technically cut off.

Why the 'L' in the article number is not a coincidence

The N-402.1L is a left-hand finial. Specifically left: the ornamental carving pattern is oriented to the left side, the termination faces left. This is the left-hand end element of the molding line—the one that caps its left end. Its paired element is the N-402.1R, the right-hand finial, which caps the right end.

Why is it important to understand this immediately? Because a finial is a positionally oriented decorative piece. Installing a left-hand finial on the right end of a molding line results in an ornamental shape 'facing' towards the profile, not outward. This is incorrect both decoratively and functionally.Molding tipshould open outward—from the system towards the edge, not from the edge towards the system.

In practice: The N-402.1L caps the left end of the MLD-004 molding strip. The N-402.1R caps the right end. For each molding line with two open ends, one left-hand and one right-hand finial are required.

Technical parameters of the N-402.1L: small size, significant value

Product Data Sheet

Size 63 × 29 × 13 mm: compactness as a functional principle

Sixty-three millimeters in length. Twenty-nine in width. Thirteen millimeters of relief. This is a small element—and that is intentional.Molding tip 63×29×13 mmshould not be large. It is not the dominant part of the system—it is its completion. The function of the tip is to neatly close the end without overloading the facade with additional decorative weight.

A thin molding system, a thin finishing element. That is why N-402.1L has such proportions: it is proportionate to the MLD-004 profile it works with. Narrow, compact, precise—like the final word in a well-constructed phrase.

A 13 mm relief is sufficient for an expressive carved form but not excessive. With side lighting, it creates soft chiaroscuro, readable from a distance of half a meter. From a greater distance, the tip is perceived as a neat ornamental point at the end of the molding line. That is exactly how it should work.Decorative wooden tip— inconspicuous, yet unmistakable.

Back side: profile recess

Key structural detail: the reverse side of N-402.1L features a recess that mirrors the cross-section of molding MLD-004. The tip is not simply placed against the profile end — it is slipped onto it, tightly enveloping the molding section. This ensures precise positioning without marking and without risk of misalignment: the product 'finds' its place on its own.

This design is a hallmark of a professional product, engineered not as a separate decoration, but as a systemic component.wooden decor for moldingsSTAVROS is a system, not a collection of random parts.

Material: beech and oak — two characters of one product

Beech: a light, fine-grained, disciplined wood

Beech is one of the most popular species for producing solid wood furniture decor. Fine, uniform texture, light creamy-pinkish tone, good hardness with relatively low weight. Beech processes excellently: carving comes out crisp, the boundaries of ornamental details — precise.

Tip for beech moldingN-402.1L is the optimal choice for furniture under light enamel. The 'For Enamel' version in beech: the surface is prepared for primer and finish paint application, the texture is neutralized — the result after painting: a monolithic, even surface without visible wood grain. The 'Standard' version in beech: light, delicate texture, suitable for tinting and translucent coatings.

For manufacturers of white, cream, and pastel classic furniture, beech is the first choice.Carved beech tipAfter applying white matte enamel, it is indistinguishable from an MDF facade under the same enamel—the system looks monolithic.

Oak: a dark, expressive, characterful wood species

Oak is a wood species with a strong character. Pronounced, large texture, dark honey tones with a golden sheen, high hardness. Oak is heavier than beech but also richer visually: oak's texture is a decorative element in itself.

Tip for oak moldingN-402.1L—the choice for projects where wood is meant to be shown, not hidden. 'Standard' finish in oak under clear varnish or oil-wax: rich texture, natural tone with golden notes—for 'warm classic' and English style. 'Under enamel' finish in oak: texture prepared for opaque coatings—suitable for dark enamels, under which beech would lose its color, while oak would give the surface additional depth.

Solid oak furniture withoak decor—a declaration of material honesty. Texture, wood species, age of the tree—everything is legible, and this is a value, not a flaw.

Standard vs Under Enamel: What Lies Behind the Finish

Two execution options are not just a matter of polishing degree. These are different finishing strategies.

Standard — a product with a natural solid wood surface, ready for transparent, tinting, stain, and other coatings that preserve or emphasize the wood grain. This option is chosen when working with natural finishes: oil, wax, varnish, tinting. The grain pattern of beech or oak remains visible and serves as a decorative element of the product.

For enamel — a product with an additionally prepared surface for applying opaque coatings. The wood pores are filled, the surface is leveled, and the polishing is finer. When applying white, colored, or dark enamel, the result is a smooth, uniform surface without visible wood grain.Wooden decor under enamel— the standard choice for producing classic painted furniture.

Compatibility with MLD-004: one profile — one tip

MLD-004: Molding that requires proper finishing

MLD-004— a wooden molding profile from the solid wood series 004. This is a profile of a specific cross-section for which the N-402.1L cap was designed. The recess on the back of the cap exactly replicates the cross-section of MLD-004: the product tightly wraps around the profile end, without gaps or misalignment.

Crucially important: N-402.1L is a kit specifically for MLD-004. Use with moldings of other series (MLD-001, MLD-002, MLD-003) will require prior verification of the cross-section, as each profile has a unique cross-section. Without a recess for the specific profile, a tight fit will not be achieved.

Tip for MLD-004N-402.1L is a system component, designed as part of the 004 series. This approach fundamentally distinguishes professional molding decor from universal overlays: a system component fits without adjustment.

Series 004 system: what is included in the full set

The 004 series in STAVROS wooden decor has a complete set of components:

• Molding profileMLD-004— trim for the frame perimeter

• Corner elements MLD-4U-2.1L and MLD-4U-2.1R — decorative corner units

• Central and side decor of the 004 series

• N-402.1L and N-402.1R — end caps for molding strips

N-402.1L — the finishing component in this set. It is installed last, capping the ends of the molding strips where the molding line has open ends.Decor for MLD-004forms a complete artistic system only in its full set.

Where N-402.1L is used: objects, scenarios, calculations

Decor for furniture fronts: caps on open ends

decor for furniture facadeswooden end cap — application of N-402.1L where MLD-004 molding strips have open ends not covered by corner elements.

When does this occur? In several typical configurations:

• Horizontal molding line without frame closure — the molding runs horizontally across the front from one vertical edge to the other. Both ends are open. N-402.1L is needed on the left and N-402.1R on the right.

• Vertical molding line — similarly: the molding runs vertically, the top and bottom ends are open.

• Unclosed frame system — a molding frame with open ends that do not transition into corner elements: one end extends beyond the facade or abuts the edge of the slab.

Wooden decor for cabinetTip — this is a line in the specification that is often forgotten during the initial calculation and remembered only at the final installation stage. Professional furniture makers account for tips in advance: the number of open ends of molding strips equals the number of tips in the project specification.

Decor for door panels: tips on open ends of the frame

Tip for door panelWooden — used on door leaves with molding lines MLD-004 that have open ends. In classic interior doors, this is a common configuration: a horizontal molding insert in the middle of the leaf with two open ends on the left and right edges.

Decor for wooden doorsTip — a part ordered one or two pieces per door, but it is precisely this that closes the final 'question' of the decorative system. A door without tips is a door with uncovered molding ends. A door with tips is a completed classic door.

Decor for wall panels: ends on a room scale

Decoration for wall panelWooden tip — used in wall molding systems on MLD-004, where molding strips have open ends: horizontal lines abutting room corners or vertical architectural elements.

In a room with eight horizontal molding inserts on the walls (two on each of the four walls) — sixteen open ends. Eight N-402.1L and eight N-402.1R. A small product — but system-forming in its role on the scale of the room.

Classic furniture: chests of drawers, sideboards, cabinets, sections

Decor for a solid wood chest of drawersTip — application in chests of drawers, sideboards, dressing tables with molding elements of series 004. Horizontal molding lines dividing the front zones of a chest of drawers: each has two ends — left and right. Each end is a tip.

Forclassic furnitureTips are a sign of thoroughness. A sideboard with all molding ends closed with carved tips looks like it was made with an understanding of style. A sideboard with open ends looks like an unfinished project.

Calculation of the quantity of N-402.1L by objects

Plus the same number of N-402.1R for right ends.

Decorative style N-402.1L: carved ornament as finishing

Floral carving: nature in details

Ornament N-402.1L is a carved floral form. Leaves, shoots, curls — everything that classical decorative carving uses to add organicity to geometrically precise products. The floral ornament in the tip serves a dual function: it simultaneously covers the technical end of the molding and creates a decorative point in that place, completing the ornamental rhythm of the system.

Carved wooden decoration— is always a handmade value. Even in industrial production, a carved wooden element retains the warmth of the material: wood breathes, it is alive, its texture is unique in each piece. Polyurethane decor is precise and stable. Wooden decor is precise and alive.

Classic and neoclassical: style without compromise

Decor for classic furniturewooden carved — is a stylistic statement. N-402.1L is appropriate in:

• Classic: English, Italian, French — wherever wood and carving are the primary material language

• Neoclassical: where natural material is valued as a counterpoint to synthetics and 'fakes'

• Provence: where wooden carved details create a sense of handmade coziness

• Rustic: where the wood grain of oak under oil or wax is the decorative dominant

Wooden decor for the facadeIn projects where a natural finish is intended — this is an argument against polyurethane. For painted systems, the advantages of polyurethane are obvious. But for projects with tinted varnish, oil, wax — only wood creates the right image.

Choosing between beech and oak: not just a question of aesthetics

This question arises for everyone ordering the N-402.1L for the first time. What is better — beech or oak? The answer depends on several factors.

If the main furniture or moldings are made of beech — choose beech. A unified material in the system means a unified expansion coefficient, a unified reaction to finishing coatings, a unified visual character.

If the main furniture is made of oak — choose oak. The same logic: compatibility of materials in the system.

If the finish is white or colored enamel—both options are equally suitable for the 'Under enamel' execution. After painting, beech and oak are indistinguishable under the opaque coating.

If the finish is clear varnish or oil—the choice depends on the desired tone. Beech is lighter, more neutral. Oak is warmer, more expressive.

If maximum hardness is important—oak. If ease of processing during manual finishing is important—beech.

Carved oak tip—for warm, rich, 'English' projects. Carved beech tip—for light, airy, 'Italian' and 'French' solutions. Both are impeccable in carving and manufacturing precision.

How to properly apply N-402.1L in a molding system

Positioning: the tip is installed last

The first and main rule for working with tips: they are mounted last in the system. Molding strips, corner elements (if provided), central and side decor—all of this is mounted before the tip. N-402.1L covers the already immobile end of the already fixed molding strip.

How to finish molding with a decorative element—the logic is the same as when working with wooden moldings: first the system, then the finishing. The tip is placed on the end of the MLD-004 profile with a fit into the recess, additionally secured with glue.

Pair usage: N-402.1L + N-402.1R

A molding line with two open ends is closed by a pair: N-402.1L on the left end, N-402.1R on the right. Together they create a symmetrical finish on both sides: the ornaments of both tips open outward, towards the edges of the system.

This follows the same fundamental logic as corner elements: the left one faces left, the right one faces right, ornaments 'open' outward from the system.Molding edge decorPaired — this is decorative completeness on both sides simultaneously.

How to use a tip in a molding frame with corner elements

If the molding frame is closed around the perimeter by corner elements, tips are not needed: the ends of the molding strips are hidden under the corner overlays. Tips are used in open systems — where the molding line has free ends not covered by corner elements.

If the frame is partially closed — for example, a horizontal strip goes under a corner element on only one side, and ends with an open end on the other — one tip is needed: N-402.1L if the open end is on the left, N-402.1R if on the right.

Installation of N-402.1L: wood requires attention to detail

Surface preparation and selection

Before applying adhesive, ensure: the end of the MLD-004 molding strip is even, without splits, without dust. The recess on the back of N-402.1L should fit snugly onto the profile end. If necessary — light finishing with 220-grit sandpaper inside the recess to adjust the fit.

Installation of wooden decorUnlike polyurethane, requires consideration of the material's nature: wood reacts to humidity. Adhesive for wooden parts — carpenter's PVA or mounting adhesive based on synthetic resins. Cyanoacrylates — only for spot fixing, not as the main adhesive.

Fitting, fixing, curing

How to attach a tip to moldingMade of wood: dry fitting is mandatory. Put the N-402.1L onto the end of MLD-004 without adhesive, ensure a tight fit of the recess and correct orientation of the ornament (left tip on left end). Apply adhesive to the recess and to the molding end in a thin, even layer. Put on the tip, press evenly, hold for 60–90 seconds. Secure with painter's tape or a small clamp. Curing: at least 2–4 hours for PVA, 1–2 hours for mounting adhesive.

Finish coating: after installation or before?

A professional question with two correct answers depending on the scenario.

If the finish is enamel matching the cabinet color: it is recommended to install N-402.1L before final painting. Then the system (molding + tip + cabinet) is painted as a single layer — boundaries disappear under the coating.

If the finish is clear varnish or oil for a natural wood grain look: the coating is applied to each component separately before installation, the joint after installation is touched up with a brush by hand. This allows for even application of the coating, preventing uncoated areas in the recess and on the end.

Tip from solid wood array for painting— 'Under enamel' finish implies the first scenario: installation, then primer, then enamel. 'Standard' finish — both scenarios depending on the project.

Buy N-402.1L at STAVROS: complete system in one place

Buy tip for molding N-402.1L can be found in the STAVROS catalog in the section decor for wooden moldings. Paired right tip N-402.1R — there as well. Molding MLD-004 — in the section solid wood moldings. Corner elements of series 004 (MLD-4U-2.1L, MLD-4U-2.1R) — in the same section of decor for moldings.

Order tip for MLD-004in a set with molding and corner elements of series 004 — one order, one delivery, complete system.buy wooden decor for furniturewith delivery across Russia.

FAQ: Frequently Asked Questions about N-402.1L

What is a molding tip and what is it for?
A tip is a finishing decorative element that covers the open end of a molding strip. Without it, the molding end remains technically unfinished. With a tip, it acquires a neat carved shape that completes the system artistically.

Are N-402.1L and N-402.1R the same products?
No. L is a left tip, R is a right tip. The ornament is mirror-oriented. For a molding line with two open ends, one left and one right tip are needed.

Which molding is N-402.1L compatible with?
Compatible with MLD-004 — a wooden molding profile of the 004 series. The recess on the back of the tip exactly matches the cross-section of MLD-004. Use with other profiles requires checking cross-section compatibility.

What to choose: beech or oak?
Depends on the material of the main furniture and the type of finish. If the furniture is beech — choose beech. If oak — choose oak. For enamel, both options are equally suitable. For clear lacquer — beech is lighter, oak is warmer and more expressive.

Can N-402.1L be used under white enamel?
Yes, this is precisely what the 'For enamel' version is designed for, with an additionally prepared surface for opaque coatings.

Should the tip be painted before or after installation?
For enamel: install before painting, then primer and enamel on the entire system. For transparent coatings: coating is applied to components separately, the joint is touched up after installation.

Which styles is N-402.1L suitable for?
Classic, neoclassical, Provence, rustic, English style. Not recommended for minimalism, high-tech, loft.

Where to place an order?
In the STAVROS catalog, in the section decor for solid wood moldingsOnline application, confirmation by manager, delivery across Russia.