Dimensions and Options
Description
KON-007 Kit — is a ready-made curated composition consisting of a wooden rod MLD-060 and geometric shapes KN for assembling one vertical decorative stand.
The quantity and composition of shapes can be changed or partially excluded to create your own composition.
KON-007 is a stylish solution for creating interior items from natural wood. It can be used for zoning living spaces, creating decorative partitions or columns.
The kit is supplied unassembled.
Installation
• shapes are fixed onto the wooden rod MLD-060 using wood glue (we recommend PVA D3 glue);
• they can also be secured with painter's tape during glue polymerization;
• additionally, micro pins can be used during installation.
Large shapes act as a connection node — two rods can be glued into them to assemble long structures.
We recommend painting or tinting only after full assembly and installation of all elements. The paint layer may increase the hole diameter and complicate installation. On shaped elements, we advise masking the mounting channel before painting.
Finishing Options
• wood oil — the simplest and most beautiful method, highlighting the natural wood texture;
• enamel of different colors (for bright colored compositions);
• tinting with stains, finishing with transparent varnishes, applying patina.
Set Composition
Have questions?
Customers also buy
Evgenia Z.
August 6, 2026
We have been working with this manufacturer for a very long time. They always ship on time and with good quality. I especially want to thank our manager Tatyana Lebedeva - a wonderful manager! I wish the company prosperity!
Incognito 3.
July 28, 2026
I am grateful to manager Oksana for her attention to the client, excellent, detailed consultations on selecting wooden legs for a tabletop, and quick order processing. I also cannot fail to note the uniqueness of the project as a whole, the most beautiful and high-quality wood products on the market, and a variety of elements for creating an interior in any style. Good luck and prosperity!
Evgeny R.
July 7, 2026
A good, convenient website and assortment. I was tired of searching for floor lamp legs on the marketplace until I stumbled upon Stavros. Plus, the widget responded immediately at night (apparently AI), and in the morning a polite girl, Oksana, wrote and told me everything, helped me choose what I needed. If only everyone worked like they do! Good luck to the production!
More than 20 years on the market
The company's success began in 2002, when two artists — Andrey Ragozin and Evgeny Tsapko — created a small creative workshop for producing wooden carved items. The masters' work was quickly noticed, and within a year they were invited to participate in the reconstruction of the Konstantinovskiy Palace in Strelna.
After the success of this project, the company focused on recreating palace interiors, furniture, church furnishings, and carved decorations in various artistic styles. They worked with cultural heritage sites: The Hermitage, the Alexandrovsky Palace, the Troitsko-Izmaylovsky Cathedral, the Sheremetyevsky Mansion, and many others.
The masters' task — and still is — to create wooden items with the highest level of detail and understanding of every element, based on impeccable knowledge of artistic laws and interior styles.
STAVROS Guarantees
Quality of products without complaints
We save your time, peace of mind, and budget
Large warehouse program
We solve your tasks with maximum speed
Adherence to production deadlines
Streamlined process reduces all risks
Delivery from 1 piece throughout Russia
Quality service regardless of order volume
Your positive business reputation
Reliable partner — the foundation of your business
More products in the constructor category
Frequently asked questions
Our showrooms are located in Saint Petersburg and Moscow. Production is located in Saint Petersburg.
Moscow contacts: https://www.stavros.ru/contacts_all/?tab=msk
Contacts of Saint Petersburg: https://www.stavros.ru/contacts_all/?tab=spb
- Send request by email [email protected]
- Write to us at Telegram
- Write to us at WhatsApp
- Order by phone +7 (800) 555-46-75
- Visit our showroom in Saint Petersburg and Moscow
Yes, we ship orders throughout Russia and to CIS countries.
We cooperate with transportation companies such as СДЭК and DPD.
You can also arrange pickup of your order through any convenient transportation company for you.
Delivery cost depends on the size, weight of the item, and delivery address.
When placing an order, the delivery cost is calculated automatically and displayed as a separate line on our website.
Prices and availability of items on the website are always current. Data is updated daily.
Note: items in stock are stored on the warehouse in unpolished form and shipped within 3 working days.
If the item is not in stock, average production time: 5–10 working days.
This is the quality of polishing of the items.
Standard — machine polishing, at a more attractive price.
Prestige — detailed hand polishing, items do not require further work.
More details: https://www.stavros.ru/information/kachestvo/
This is the type of veneer of the items.
Under enamel: produced by gluing wooden laminates without color and texture matching. Contrast tonal and textural differences are noticeable. This blank should be chosen if the item is intended for opaque coating.
Under tinting: produced by gluing wooden laminates with color and texture matching. Tonal and textural differences may occur. This blank should be chosen if the item is intended for semi-transparent finish.
More details: https://www.stavros.ru/information/kachestvo/
Beech — dense, non-porous wood, most often used for items covered with enamel.
Oak — dense, porous wood with clearly visible natural grain. Due to its strength and decorative properties, it is often used in items with semi-transparent coating, highlighting the wood pattern.
Custom-made, if non-standard items are required, we can produce products from other types of wood, including blanks provided by the customer, manufactured according to our technical specifications.
All our furniture legs can withstand a vertical load of at least 100 kg.
Average production time for custom-made items: 5–10 working days.
Most items are stored on the warehouse in unpolished form. We need time to polish and pack orders.
Yes, we manufacture non-standard items according to individual projects, but we only accept orders with a minimum quantity.
We can manufacture items of the desired size, but we only work with bulk orders. For details, please consult the sales department manager.
Yes, some of our products can be used outdoors. For example, polyurethane items, as well as carved door casings made of pine.
Other items are produced to order using PUR glue, if minimum quantity is available. No warranty is provided for such products, as outdoor conditions are considered aggressive.
Yes, we paint items when ordering products for a total amount of 150,000 rubles or more.
- Dust removal. After sanding, the surface must be dusted.
- Priming. Apply primer in an even layer.
- Matting. After the primer has fully dried, the surface should be matted (lightly sanded for better adhesion).
- Finish coating. Apply finish coating: lacquer or enamel, in 2 layers, with interlayer drying.
More details: https://www.stavros.ru/information/sovety/
Apply adhesive to the decor. Place it on the surface and press briefly. Then, lift the decor from the surface and leave it open for 3–5 minutes. Press the decor firmly onto the surface and hold for 5–10 seconds.
More details: https://www.stavros.ru/information/sovety/
Ideally, you should prepare a design project before placing an order.
You can do this yourself by downloading drawings of our products from our website, or you can order a project from us.
If the number of decorative elements and fittings is small, our company's manager can assist you with selection.
Unfortunately, this service is not provided.
The packaging method depends on the type of items, but in each case, we ensure sufficient protection for safe transportation.
We most often use corrugated cardboard and stretch film. Fragile items are additionally secured on a rigid base to prevent damage during transport.
We ship all items starting from 1 piece.
Room measurements and item installation can be performed by our partners — carpentry companies represented in most regions of Russia.
Often searched in category Wooden and MDF items
7602
3332
2639
1756
1608
1325
1238
Decorative partition post set KON-007 made of beech or oak
The KON-007 partition set is a collection of wooden elements for assembling one vertical decorative post 2800 mm high. The product is used to create interior partitions, decorative zoning of a room, kitchen-living room, hallway, studio, bedroom, or commercial space.
Important: one KON-007 set is one decorative post. Several sets are used to assemble a full partition. The interior visualization may show several posts, but one set is designed for only one vertical post.
KON-007 is assembled from wooden molding MLD-060 and turned geometric elements KN-005, KN-006, KN-007, KN-008, KN-009, KN-012, and KN-014. The composition combines rounded, elongated, and geometric shapes, so the finished post looks expressive and is suitable for decorative partitions in modern, neoclassical, and designer interiors.
Features of the KON-007 set
The KON-007 set helps create a wooden partition for zoning without the feeling of a solid wall. Vertical posts visually divide the room but preserve light, air, and openness of the space. This solution is convenient for studio apartments, kitchen-living rooms, hallways, relaxation areas, dining areas, salons, showrooms, cafes, and apartments.
The height of the assembled post is 2800 mm. The maximum width of the decorative element is 130 mm, the rod diameter is 34 mm. Due to this, the post can be used in floor-to-ceiling partitions and looks good both as a separate decorative accent or as part of a rhythmic composition of several posts.
Material: beech or oak
The KON-007 set can be ordered in beech or oak.
Beech is more often chosen for painting with enamel. It is well suited for smooth finishing, neat sanding, and interior solutions where a clean color of the coating is important.
Oak is chosen for more premium interiors where it is necessary to emphasize the natural texture of solid wood, the expressive grain of the wood, and a prestigious appearance. An oak post is especially well suited for interiors with natural materials, wooden furniture, veneer, stone, and warm shades of finishing.
Specifications
| Parameter | Value |
|---|---|
| Model | KON-007 |
| Product type | One decorative post kit |
| Size A × B × D | 2800 × 130 × 34 mm |
| Material | Beech or oak |
| Sanding quality | Prestige |
| Regluing quality | For enamel |
| Production | Custom Order |
| Average production time | 5–10 days |
| Delivery | Across Russia via the CDEK transport company |
The kit is suitable for subsequent painting with enamel. This allows you to match the color of the stand to the walls, furniture, doors, baseboards, or other interior elements.
Set Composition
| Element | Size | Quantity |
|---|---|---|
| Wooden molding MLD-060 | A=34, C=34, L=2400 mm | 1 pc. |
| Geometric figure KN-005 | A=66, B=76, C=76, D=34 mm | 4 pcs. |
| Geometric figure KN-006 | A=90, B=72, C=72, D=34 mm | 3 pcs. |
| Geometric figure KN-007 | A=44, B=120, C=120, D=34 mm | 1 pc. |
| Geometric figure KN-008 | A=150, B=96, C=96, D=34 mm | 3 pcs. |
| Geometric figure KN-009 | A=22, B=62, C=62, D=34 mm | 6 pcs. |
| Geometric shape KN-012 | A=140, B=96, C=96, D=34 mm | 2 pcs. |
| Wooden molding MLD-060 | A=34, C=34, L=1000 mm | 1 pc. |
| Geometric shape KN-014 | A=124, B=130, D=34, E=34 mm | 1 pc. |
The kit includes elements of different sizes and shapes. Parts KN-008 and KN-012 create elongated accents, KN-014 adds a large geometric element, while KN-005, KN-006, and KN-009 form a decorative rhythm along the height of the stand. As a result, the partition looks not like a simple slat, but like a full-fledged interior decorative element.
Where to use the KON-007 partition kit
KON-007 is suitable for assembling decorative wooden partitions in residential and commercial interiors. The stands can be used where you need to separate one functional zone from another, but you don't want to block the space with a solid wall.
The set can be used for:
-
zoning a kitchen-living room;
-
separating the living room and hallway;
-
decorating a studio apartment;
-
decorative zoning of a bedroom;
-
framing an opening;
-
separating the dining area and lounge area;
-
creating an interior accent in the hall;
-
decorating a cafe, salon, showroom, or apartment.
The decorative wooden partition based on KON-007 helps make the interior more expressive, add vertical rhythm, and emphasize the individual character of the space.
Advantages of KON-007
The KON-007 kit is chosen for projects where natural material, expressive form, and the ability to assemble a partition of the required width are important. From several identical posts, you can create a lightweight decorative partition for zoning a room, hallway, kitchen-living room, or commercial space.
Main advantages:
-
natural beech or oak;
-
post height 2800 mm;
-
expressive geometry of turned elements;
-
preparation for enamel;
-
possibility of painting to match the interior color;
-
suitable for modern, neoclassical, and designer interiors;
-
from several kits, you can assemble a partition of the required width;
-
decorative zoning without the feeling of a blank wall.
How many KON-007 kits are needed for a partition?
One KON-007 kit equals one vertical decorative post. A full partition uses several kits. The exact number depends on the width of the opening, the chosen spacing between posts, and the overall design solution.
Before ordering, it is advisable to determine the width of the future partition, the height of the room, and the desired step between posts. The smaller the distance between posts, the denser and more expressive the partition will be. With a larger step, the structure looks lighter and allows more light to pass through.
Buy decorative wooden partition KON-007
At STAVROS, you can order a KON-007 partition kit made of beech or oak for decorative interior zoning. The kit is designed for assembling one vertical post 2800 mm high. From several posts, you can create a wooden partition for a room, kitchen-living room, hallway, studio, apartment, or commercial space.
KON-007 is suitable for those looking for a decorative wooden partition for zoning, who want to preserve light in the room while adding an expressive accent of natural solid wood to the interior. The posts can be painted with enamel, matched to the color of walls, furniture, or other wooden elements in the interior.
FAQ
Is one KON-007 kit the entire partition?
No. One KON-007 kit is one decorative post 2800 mm high. A full partition uses several kits.
What material can KON-007 be ordered in?
The kit can be made of beech or oak. Beech is well suited for enamel, while oak is chosen for interiors with a pronounced natural wood texture.
Can I paint KON-007?
Yes. The "Under enamel" regluing quality is suitable for subsequent painting.
Where is this rack used?
The rack can be used in a living room, kitchen-living room, hallway, studio, bedroom, cafe, salon, showroom, or other interior where decorative zoning is needed.
How to choose the number of racks?
You need to measure the width of the opening and choose the distance between the racks. One KON-007 set equals one vertical rack.
Your request has been sent!
Our manager will contact you within 5 minutes