Buy legs: unified selection matrix for furniture of any purpose

Imagine: you open the furniture leg catalog, see 200 positions and realize — choosing randomly is meaningless. Height from 5 to 120 centimeters, diameter from 20 to 100 millimeters, oak, beech, ash, spruce, metal, plastic, M8, M10, M12 screws, 60×60 and 80×80 plates. How to extract exactly what you need for your table, chair, sofa from this chaos? Trial and error can cost weeks and thousands of rubles on unsuitable options. Or you can use a systematic approach — the selection matrix, where each parameter filters the array of options down to a single correct solution. When deciding tobuy legsfor furniture, understanding the selection logic turns a complex task into a sequence of simple steps with predictable results.

Geometric Furniture Leg MN-137

from 255.65 $

Geometric furniture leg MN-140

from 200.46 $

Precision Furniture Leg MN-143

from 207.79 $

Carved Furniture Leg MN-071

from 37.60 $

Carved Furniture Leg MN-184

from 99.25 $

Turned furniture leg MN-107

from 45.54 $

Geometric Furniture Leg MN-109

from 45.66 $

Modern Furniture Leg MN-226

from 51.15 $

Go to Catalog

Selection Matrix: Five-Axis Coordinate System

Watch video ...

Axis 1: Furniture Purpose

First and primary filter — for what purpose is the furniture intended. This determines the height range, load-bearing capacity, and type of mounting.Legs for tablesdiffer radically fromlegs for chairsnot only in size, but also in construction, material, and price.

Dining tables require a height of 70–73 centimeters (to match standard tabletops for final 75 cm), diameter of 60–80 millimeters for wooden legs or 40–60 for metal legs, load-bearing capacity of 120–180 kilograms per leg. Material — solid hardwood (oak, beech) or steel, mounting — M10 screws or 80×80 mounting plates. Catalog filter: «Purpose → Dining Table», leaving 20–30 suitable models out of 200.

Chairs require a height of 38–42 centimeters, diameter of 35–50 millimeters, load-bearing capacity of 80–120 kilograms accounting for dynamic loads.Legs for chairsare usually made of beech or ash — species capable of withstanding repeated impact loads during seating. Mounting — M8 or M10. Filter narrows selection to 15–25 models.

Coffee tables use legs 35–45 centimeters high, diameter 30–50 millimeters, load-bearing capacity 40–80 kilograms.Legs for coffee tablescan be more elegant and slender — loads are light, aesthetics matter more than strength. Choose 10–20 positions.

Chests and cabinets are placed on low supports 8–15 centimeters high.Legs for chestsare often adjustable metal or plastic legs with 60×60 mounting plates for convenient mounting to thin bases made of MDF or plywood. Remaining options: 12–18.

Sofas require heavy low supports 10–15 centimeters high, diameter 70–100 millimeters, load-bearing capacity 150–250 kilograms. Material — oak or metal, mounting reinforced with 100×100 plates or M12 screws. Filter leaves 8–15 positions.

One filter reduces the selection field by 8–10 times. Further, the other axes of the matrix are applied.

Our factory also produces:

Precision Furniture Leg MN-155

from 9.52 $

Carved Furniture Leg MN-076

from 35.89 $

Carved furniture leg MN-189

from 145.89 $

Decorative leg MN-149

from 17.46 $

Geometric Furniture Leg MN-132

from 31.38 $

Geometric Furniture Leg MN-134

from 37.36 $

Geometric Furniture Leg MN-137

from 255.65 $

Geometric Furniture Leg MN-139

from 109.02 $

View Full Product Catalog

Axis 2: Furniture Frame Material

The type of material to which the legs are attached dictates the mounting method and, consequently, the construction of the legs themselves.

Solid wood 20 mm thick — ideal base. Suitable for any type of threaded inserts: M8, M10, M12 depending on load. Catalog filter: «Mounting → M10 Screw», if this is a dining table made of 30 mm spruce. From 20 dining table leg models, 12–15 remain with threaded mounting.

MDF or particleboard 16–25 mm thick require either special threaded inserts with increased diameter and fine thread pitch, or (preferably) mounting plates distributing load over 60–100 square centimeters. Filter: «Mounting → 80×80 Mounting Plate». From 20 models, 8–10 remain with plate mounting.

Plywood 18–24 mm thick is universal — both threaded inserts and plates work. Choose based on other parameters (aesthetics, price, disassembly possibility). Filter does not narrow significantly, but provides understanding of compatibility.

Metal frame (profiled tubes, sheet steel) for tables and chairs requires legs with welding or bolted mounting. Specific segment, usually separated into its own catalog section. Filter: «Furniture Material → Metal».

Second filter reduces selection by half to two-thirds. From 200 positions, after two filters, 5–10 truly suitable options remain.

Axis 3: Interior Style and Aesthetic Preferences

When functional parameters are defined, aesthetics are applied.Furniture legsof the same height and load-bearing capacity can differ radically in shape, making them suitable for one style and unacceptable for another.

Classic style requires turned legs with a profile — alternating expansions, contractions, bulges, and rounded sections. The profile can be simple (3–4 elements) or complex (8–10 section transitions). Filter: «Shape → Turned Classic». Species — oak, beech, ash with natural oil or lacquer finish, emphasizing the grain texture. From 10 functionally suitable classic models, 3–5 remain.

Modern minimalism prefers straight cylindrical or conical legs with constant or smoothly varying cross-sections, without decorative elements. Metal spike legs 8–12 mm in diameter, visually weightless. Filter: «Shape → Cylindrical» or «Material → Metal». 2–4 models remain.

Scandinavian style uses light-colored wood (birch, bleached oak, ash) with simple conical or slightly turned forms. Finish is oil or light lacquer. Filter: «Species → Birch» + «Shape → Conical». 2–3 options.

Loft and industrial — metal legs with square cross-section 30×30 or 40×40 mm, matte black powder coating. Combined options possible: steel frame with wooden decorative inlays. Filter: «Material → Metal» + «Finish → Matte Black». 1–2 models.

Third filter selects from functionally suitable models those that harmonize with the interior. From 5–10 models, 2–4 remain.

Axis 4: Price and price-to-quality ratio

Budget is an objective reality. But it’s important to understand what you’re paying for and where you can save without compromising quality, and where savings will lead to problems.

Budget segment: 500–1500 rubles per set of 4 legs
Simple forms of pine or birch legs with basic finishing. Plastic adjustable supports for tables. Load capacity 50–80 kg per leg, service life 10–15 years. Suitable for temporary furniture, garden settings, children’s rooms (where furniture changes quickly as the child grows).Buy furniture legsThis segment makes sense when the usage period is limited.

Mid-range segment: 2000–4000 rubles per set
Oak or ash legs with quality turned work and professional finish (oil, lacquer from European manufacturers). Load capacity 100–150 kg, service life 30–50 years. Optimal price-to-quality ratio for permanent home furniture. Difference from budget — reliability and longevity. Overpayment of 500–1000 rubles pays off over decades of flawless service.

Premium segment: 5000–10000 rubles per set
Oak legs with complex profile, carving, artistic finish. Load capacity 150–250 kg, service life 50–100 years. This is already not just a functional element, but a piece of decorative-applied art. Makes sense for luxury solid wood furniture, classic interiors, antique projects.Buy legs for furniturePremium-class — an investment in aesthetics and status.

Price filter: «Price → 2000–4000 rubles». From 2–4 stylistically suitable models, 1–2 remain within your budget.

Axis 5: Delivery time and availability

Final filter — time-based. When are legs needed: urgently (1–3 days), in normal mode (5–10 days), or willing to wait (2–4 weeks on order)?

In-stock items are shipped on the day of payment, courier delivery within Moscow 1–2 days, 3–7 days by transport company across Russia. Inventory assortment — 60–80% of catalog, most popular sizes and models. Filter: «Availability → In Stock». If your model is in stock — receive it quickly.

Custom-made items are produced 7–14 days (standard models in non-standard sizes or finishes) or 2–4 weeks (exclusive models, carving, complex profile). Plus delivery. Assortment — remaining 20–40% of catalog, specific solutions. If urgency is not required — any variants are available.

Urgent manufacturing with an additional payment of 30–50% cuts delivery time in half: 3–7 days instead of 7–14, 10–14 days instead of 2–4 weeks. Option for cases when a specific model is needed quickly.

Fifth filter finalizes the selection. From 1–2 models that are functionally, aesthetically, and price-wise suitable, choose the one available within the required timeframe.

Catalog filters: practical application

Smart search interface

Professional catalogof furniture legs and supportsis organized by sequential filtering. Left — filter panel, right — results, top — found items counter, changing with each filter adjustment.

Step 1: Choose purpose
Click «Purpose → Dining Table». Counter changes from 200 to 28 — that’s how many models are suitable for tables. On the right — their images, names, brief specs (height, diameter, material, price).

Step 2: Specify furniture material
Add «Mounting → M10 Thread» (your solid wood tabletop). Counter drops to 16. Models with mounting plates disappear from results.

Step 3: Choose wood species
«Species → Oak». 9 models remain — all oak legs for tables with M10 thread.

Step 4: Set style
«Shape → Turned Classic». Counter shows 5 — cylindrical and conical legs are excluded, only turned legs with profile remain.

Step 5: Limit budget
«Price → 3000–5000 rubles». 3 models remain — exactly what you need. Three turned oak legs, 71 cm high, with M10 thread, within your budget. Left to choose by aesthetics (profile details) and availability (in stock).

The entire process took 2–3 minutes. Without filters, you’d have to browse 200 positions for hours, manually comparing parameters, risking missing suitable options or making compatibility errors.

Save search parameters

Smart catalog remembers filter settings. If you selected legs for a table, then later needed legs for chairs — simply change one parameter «Purpose → Chair», other filters (species, style, budget) remain saved. Counter recalculates under new conditions. This saves time when assembling multiple furniture items in one style.

The «Favorites» function allows saving 2–3 final options for comparison. Click the heart icon — the model is added to favorites. Then open the «Favorites» section, see selected models side by side, compare details, prices, availability in depth. Decided — click «Add to Cart», proceed to checkout.

Model comparison: evaluation criteria

Detailed specifications

When filters narrow the selection to 2–5 models, detailed comparison begins. Professional catalog provides full information for each position:

Dimensions with tolerances
Not just «height 71 cm», but «710 ± 1 mm». This guarantees that all four legs in the set are identical to the millimeter, ensuring the furniture won’t wobble. Base diameter «60 ± 0.5 mm», end diameter «40 ± 0.5 mm» for conical legs. Precision is critical for symmetry and stability.

Load capacity with test protocol
«Load capacity 150 kg (Test Protocol #234/2024)». This is not a manufacturer’s declaration, but a documented figure. The leg was tested on a hydraulic press, and the load at which deformation or failure began was recorded. With a safety factor of 1.5, the working load was determined. The protocol is available via link for review.

Material with species and moisture content specified
«Solid oak, grade A, moisture 8–10%». Grade A means absence of knots, cracks, resin pockets, or discoloration. Moisture 8–10% corresponds to equilibrium moisture in heated rooms — the leg won’t deform or crack after installation.

Finish with manufacturer and number of coats specified
«Osmo 3062 oil (Germany), 2 coats, consumption 80 g/m²». Specific composition, known on the market, with known characteristics (ecological, water-resistant, wear-resistant). Two coats — optimal protection without excessive thickness. Consumption confirms quality application.

Packaging
«Includes: 4 legs, 4 M10×30 mm sleeves, 4 lock nuts, 4 woolen washers Ø30 mm, instruction». Everything needed for installation, nothing else to buy.

Net and gross weight
«Net 3.2 kg (4 legs), gross 4.1 kg (with packaging)». Information for calculating delivery cost, understanding leg weight.

Comparison table

The «Compare» function generates a table from selected models, where parameters are arranged in rows and models in columns. Differences are highlighted in color, identical parameters — gray. This simplifies analysis:

You can see: Models A and B are in stock, B is on order. Birch is cheaper than oak A and B, but slightly heavier. B is more expensive than the others, with lacquer finish instead of oil. Such a table in a minute gives understanding that would require 10–15 minutes of manual comparison of descriptions.

Wood species: characteristics and application

Oak: king of strength and durability

Density 700 kg/m³, hardness by Brinell 3.7–3.9 — this is the maximum among European hardwoods.Oak solid wood legsThey withstand 150–250 kilograms per support without deformation, last 50–100 years. The texture is pronounced, with beautiful growth rings and medullary rays, creating a "mirror" effect on radial cuts.

Color varies from light yellow (young oak) to dark brown (weathered, thermally treated). Standard finish — oil or lacquer, highlighting the natural tone. Staining with stains is possible in walnut, padauk, or wenge shades to imitate exotic species.

Price: 3500–6000 rubles per standard set of table legs, 2500–4000 for chairs. Premium quality is justified by durability and aesthetics.

Birch: Strength and Accessibility

Density 680 kg/m³, hardness 3.8 — almost like oak, but texture is less pronounced, uniform, without medullary rays.Beech balustersAnd furniture legs withstand the same loads as oak, but cost 20–30% less.

Color is light pink or cream, turns brownish-red after thermal treatment. Birch is easy to stain, easily painted in any color with enamel. For classic interiors with painted furniture (white, ivory, gray), birch is optimal — dense structure, enamel lays evenly, texture is not noticeable under enamel.

Birch's drawback — hygroscopicity. Without quality moisture protection, wood actively absorbs water, swells, and deforms. For kitchens and bathrooms, birch requires two to three layers of polyurethane lacquer or moisture-resistant oil.

Price: 2800–5000 rubles for standard table set, 2000–3500 for chairs. Optimal price-to-strength-to-aesthetics ratio.

Ash: Elasticity and Contrasting Texture

Density 690 kg/m³, hardness 4.0 — the hardest among available species. Fibrous, elastic structure — ash resists impact loads better than others, doesn't crack or splinter.Chair legsAsh is ideal — multiple impacts during installation do not damage the material.

Texture is contrasting, with clear growth rings, resembling oak but lighter. Color ranges from cream-white to light brown. Ash is popular in Scandinavian interiors, where light wood with pronounced structure is valued.

Processing is similar to oak — oil for natural finish, lacquer for protection, enamel for coloring. The species is stable, not prone to deformation with proper drying.

Price: 3000–5500 rubles for table set, 2200–4000 for chairs. Slightly more expensive than birch, cheaper than oak.

Birch: Light Economic Efficiency

Density 650 kg/m³, hardness 3.0 — average indicators. Birch is less durable than oak or beech, but for light and medium furniture (tables, chairs without heavy use, cabinets) it is quite sufficient. The texture is uniform, fine, almost imperceptible.

The main advantage of birch is its color. Light, almost white wood is ideal for Scandinavian style, minimalist interiors. Birch stains well and is easy to paint — a base for any color.Wooden balusterBirch, after being painted white, is indistinguishable from more expensive species.

Price: 2000–3500 rubles per set for tables, 1500–2800 for chairs. The most affordable among hardwoods.

Spruce: budget functionality

Density 520 kg/m³, hardness 2.5 — a soft species, easily dents under impact, scratches.Table legsSpruce is suitable only for light furniture with a load of up to 60–80 kilograms per leg. For dining tables, sofas, heavy cabinets, spruce is not strong enough.

Advantages — low price and ease of processing. Spruce is easy to saw, drill, and turn. The texture is expressive, with contrasting growth rings and resin streaks. The color is yellowish-white, darkening to golden-brown with age.

Application: garden furniture, temporary structures, children’s furniture (which will be replaced anyway after 5–7 years). Painted spruce looks decent, but deforms faster under load compared to hardwoods.

Price: 1200–2500 rubles per set for tables, 800–1800 for chairs. Savings are significant, but at the cost of durability and strength.

Price-to-quality: evaluation algorithm

Ownership cost calculation

Correct evaluation is not about how much a set costs now, but how much it costs per year of use. Oak legs costing 4500 rubles last 60 years — that’s 75 rubles per year. Spruce legs costing 1500 rubles last 12 years — 125 rubles per year. Oak is more expensive to buy, but cheaper to use.

Ownership cost formula: Price ÷ Service life in years = Annual cost of use.

Example 1: Dining table

• Oak: 4500 rubles ÷ 60 years = 75 rubles/year

• Beech: 3500 rubles ÷ 40 years = 88 rubles/year

• Birch: 2800 rubles ÷ 25 years = 112 rubles/year

• Spruce: 1500 rubles ÷ 12 years = 125 rubles/year

Oak offers the best price-to-quality ratio in the long term. Spruce is the most expensive option in terms of ownership cost, though cheaper to buy.

Example 2: Garden furniture for 5 years
If you plan to use furniture for 5 years (after selling the dacha, moving), the calculation is different:

• Spruce: 1500 rubles ÷ 5 years = 300 rubles/year

• Oak: 4500 rubles ÷ 5 years = 900 rubles/year

For a short period, spruce is more cost-effective — it will serve 5 years normally, paying extra for a 60-year oak resource is pointless.

Hidden costs of cheap solutions

Cheap legs may result in additional expenses:

Floor damage: Poor-quality or missing leg caps scratch parquet or laminate. Repairing parquet in a room — 50–100 thousand rubles. Good legs with proper caps for 3500 rubles versus budget legs for 1500 without caps — saving 2000 rubles may cost 50,000 later.

Premature replacement: Spruce legs deformed after 7 years, the table wobbles. Buying new legs for 1500 rubles + dismantling old ones and installing new ones (labor or your time) + risk of damaging the tabletop during dismantling. Oak legs costing 4500 would last the same 7 years without problems and another 53 years ahead.

Furniture frame destruction: Insufficiently strong legs under heavy furniture create point loads, loosen joints, gradually destroying the frame. Repair or replacement of furniture — tens of thousands of rubles. Proper legs for 3000–5000 prevent these expenses.

Real savings formula: (Price of cheap legs + Hidden costs) ÷ Service life vs Price of quality legs ÷ Service life. Often, quality options are more cost-effective.

Delivery schedule: project planning

Warehouse stock items

60–80% of a professional manufacturer's assortment consists of standard best-selling items, continuously kept in stock. These are typical heights (71 cm for tables, 40 cm for chairs, 10 cm for sideboards), popular wood species (oak, beech, ash), classic profiles (precision-milled with 3–5 profile elements, simple conical or cylindrical shapes).

Delivery schedule:

• Day 0: Order placement, payment by 12:00

• Day 0: Shipment from warehouse on the same day (for orders placed by 12:00)

• Day 1–2: Courier delivery within Moscow

• Day 2–5: Delivery by transport company to the Moscow region

• Day 3–7: Delivery to regions of Russia

For most projects, this is sufficient. Decided to update a table — legs arrive in 2–5 days, one more day for installation, furniture is ready.

Custom-made items

20–40% of the catalog consists of items made to specific orders. These include non-standard heights (e.g., 78 cm tables for very tall individuals), rare wood species (walnut, larch), complex profiles with 8–10 elements, carving, and combined constructions.

Manufacturing schedule:

• Day 0: Order placement, 50% advance payment

• Day 1–3: Material preparation, cutting blanks

• Day 4–10: Turning, sanding

• Day 11–12: Application of finish (2 coats of oil with 24-hour drying between coats or 2–3 coats of varnish)

• Day 13–14: Packaging, quality control

• Day 14: Shipment, payment of remaining 50%

• Day 15–21: Delivery

Total: 2–3 weeks from order to delivery. For projects with time buffers (apartment renovation, building a dacha, restoring antique furniture), this is a standard timeframe.

Accelerated manufacturing

Accelerated manufacturing with an additional payment of 30–50% of the item’s cost:

• Standard custom item: 7–10 days instead of 14

• Complex exclusive item: 14–18 days instead of 21–28

Acceleration is achieved through priority in the production queue, possibly working in two shifts. Used when deadlines are tight: opening a restaurant in 2 weeks, moving into a renovated apartment in 10 days, urgent furniture needed.

Planning with deadlines in mind

Scenario 1: Replacing legs on existing furniture
Table exists, only legs are needed. If the suitable model is in stock — place your order today, legs arrive in 2–5 days, install them in the evening, the table is ready by the next morning. Total time: 3–6 days.

Scenario 2: Making a table from scratch
Ordered the tabletop from a carpenter (10–14 days). Simultaneously order the legs. If standard, they will arrive in 2–5 days and wait for the tabletop. If custom-made, synchronize the delivery: tabletop in 12 days, legs in 14 days, receive everything and assemble in one day. Total project duration: 15 days.

Scenario 3: Comprehensive apartment renovation
Renovation takes 2 months. Furniture needed by the end. Order legs one month before completion (even custom-made ones will arrive on time), receive them 3 weeks before the finish, install them during the final week alongside furniture placement. Built-in buffer eliminates stress.

Step-by-step selection algorithm

Step 1: Define purpose and gather data

Measure with a tape measure:

• Desired final height of furniture from floor to top of tabletop/seating

• Thickness of tabletop/seating

• Thickness of the frame material to which legs are attached

• Distance from edge of furniture to anticipated center of leg

Calculate leg height: Final height − Tabletop thickness = Leg height.
Example: Table 75 cm − Tabletop 4 cm = Legs 71 cm.

Assess load:

• Weight of empty furniture (weigh or calculate)

• Useful load (contents, people)

• Calculated load = (Weight + Useful) × Coefficient (1.5–2.5)

• Load per leg = Calculated ÷ Number of legs × 1.3

Step 2: Open catalog and apply basic filters

Go to sectionBuy chair legsor another appropriate one.

Set filters:

1. Purpose: select furniture type (table/chair/drawer/couch)

2. Height: set range ±2 cm from calculated (for 71 cm — range 69–73)

3. Mounting: select according to your material (M10 for solid wood, 80×80 plate for MDF)

Result: 5–15 models functionally suitable.

Step 3: Specify style and material

Add filters:
4. Shape: turned/conical/cylindrical according to your style
5. Species: oak/beech/maple/birch depending on budget and requirements

Result: 2–5 models combining functionality and aesthetics.

Step 4: Limit your budget

1. Price: Set your budget range

Result: 1–3 models within your financial limits.

Step 5: Check availability

1. Availability: Choose 'In Stock' if urgent, otherwise all options are available.

Result: 1–2 optimal options.

Step 6: Compare finalists

Use the 'Compare' function, review detailed specifications, photos from different angles, customer reviews. Select the best option, add to cart, and place your order.

Conclusion: Systematic selection — guarantee of results

Buying furniture legs without a system is a lottery. You might guess correctly and find the ideal option on the first try. Or you might miss and spend weeks searching, money on mistakes, nerves on redoing. The five-axis selection matrix — purpose, furniture material, style, budget, deadlines — turns chaos into a clear sequence of filters. Each filter drastically narrows the field; within 5–7 steps, from 200 positions, 1–2 optimal options remain.

Catalog filters implement this matrix technically. No need to manually flip pages, compare numbers, or keep dozens of parameters in mind. Click the desired values — the system shows suitable options, excluding incompatible ones. Time saved by 10x: instead of 2–3 hours of manual search — 15–20 minutes with filters.

Choosing the right wood species means selecting based on specific conditions and usage duration.buy furniture legs in Moscowof the right breed — means selecting for specific conditions and usage period.

Understanding the price-to-quality ratio through ownership cost calculation prevents false savings. Cheap now may become expensive later due to hidden costs and short service life. Quality is more expensive upfront but cheaper to operate and more reliable in the long term.

Planning with delivery timelines eliminates stressful situations. Stock items for urgent projects, custom-made for projects with buffer time, accelerated production for intermediate cases. Proper synchronization of manufacturing timelines for different furniture components optimizes the overall project cycle.

STAVROS: catalog as a professional’s tool

Company STAVROS has been producing for over twenty yearsFurniture Legs and SupportsFrom a range of noble wood species, offering not just products, but a selection system and support at every stage.

STAVROS catalog implements a full matrix of filters. Purpose (12 types of furniture), height (from 5 to 120 cm in 1–2 cm increments), diameter (from 20 to 100 mm), species (oak, beech, ash, birch, pine, larch, walnut), shape (30 profile variants, conical, cylindrical, carved), fastening (M8, M10, M12, plates 60×60, 80×80, 100×100), finish (oil, lacquer, 200 enamel colors), price (from 800 to 15,000 rubles), availability (in stock / custom order). Any combination of parameters is available within a minute.

The detailed model comparison function with highlighted differences saves analysis time. Characteristic tables, test protocols, quality certificates are accessible with a click. No guessing — documented information for each position.

An assortment of 180+ models covers 95% of typical tasks. Standard heights and shapes for all furniture types are always in stock. Shipping within the same day, courier delivery in Moscow within 1–2 days, 3–7 days via transport companies with tracking across Russia.

For non-standard solutions — custom manufacturing. Any height to the millimeter, any profile per sketch, any finish from the RAL palette. Delivery times 10–20 days depending on complexity, accelerated production in 7–14 days with an additional 30%.

STAVROS consultants help you navigate the entire selection matrix. You specify furniture parameters and conditions — you receive a recommendation with justification. Not 'approximately suitable,' but 'for a 160×80 cm table made of 30 mm thick solid wood with 120 kg load, you need four legs model MN-045, 71 cm high, 60 mm diameter, oak with M10 threaded fastening, load capacity 180 kg, price 4200 rubles, in stock, delivery tomorrow.'

2-year warranty on all products confirms quality. Over two decades, there have been no cases of STAVROS legs breaking under calculated load limits during use. Wood moisture content 8–10%, coatings from Osmo and Tikkurila, stainless steel fasteners — standards guaranteeing decades of service.

Choosingbuy legsIn STAVROS, you receive not just a product catalog, but a systematic selection tool. Filter matrix, comparison function, detailed documentation, professional consultations, quality warranty — everything to ensure your choice is correct from the first try. This saves time, money, nerves, and provides confidence in results for decades ahead.