Geometric figure KN-020

Geometric shape KN-020 is a large spherical element made of natural solid wood for creating decorative partitions, open shelving, furniture posts, and custom interior structures. The part size is 104 × 104 × 104 mm, with a mounting size of 34 mm. KN-020 is made from beech or oak and is offered with "Prestige" sanding quality.

The product's form is maximally concise: a regular rounded volume is combined with prepared holes for integrating the part into a system of wooden axes and other elements. Therefore, KN-020 is not just a decorative wooden ball or a turned blank. The shape is intended for use within a modular structure, where it becomes a prominent volumetric accent between straight posts, crossbars, and other geometric parts.

KN-020 is part of the Wooden construction set STAVROS. Within a single system, the ball can be combined with cubes, conical and elongated shapes, small round elements, and smooth wooden axes. This allows the structure to be assembled for a specific interior rather than being limited to a ready-made uniform pattern.

Wooden ball KN-020 for a decorative partition

One of the main applications of KN-020 is a decorative wooden partition for space zoning.

Such a structure is suitable for cases where a room needs to be functionally divided, but a full wall would look too heavy. Vertical wooden posts preserve light and visual connection between zones, while geometric shapes make the partition itself part of the interior design.

A simple system of identical verticals looks concise, but with a large width it may seem too monotonous. KN-020 allows changing this character without complex carved decor. The large wooden ball creates contrast with the straight post and forms a noticeable point within the composition.

The 104 mm size is well suited for this task. It is not a small transitional element that is practically lost on a long post, but a full-fledged geometric shape that is clearly visible from a distance.

At the same time, the ball does not necessarily need to be installed on every vertical. In modern composition, alternation looks much more interesting: one post gets a large KN-020, the second gets a cubic element, the third gets an elongated shape, and the next one remains almost smooth.

This approach allows you to maintain lightness and at the same time make the partition individual.

For partitions between the kitchen and the living room

KN-020 is well suited for a wooden partition between the kitchen and the living room.

In a combined space, it is often necessary to mark the boundary between zones without depriving the room of light and overall volume. A tall structure made of wooden posts solves this problem much more softly than a solid wall.

Spherical elements allow you to connect the partition with furniture and the rest of the interior. For example, oak KN-020 can be used in a room with an oak floor, table, or facades. Beech elements are suitable for a lighter and more neutral composition.

If there is an open shelving unit or wooden wall panels nearby, the same wood species will help visually unify several objects.

The shapes can be placed at different levels. One ball is closer to the top, another at eye level, and a third significantly lower. Thanks to this, the gaze moves along the entire height of the structure, and the partition is not perceived as a row of identical slats.

For the bedroom, study, and hallway

In the bedroom, a wooden partition with KN-020 can separate a workspace, a dressing room, or a small relaxation area.

The open design is especially convenient in a room where it is important to preserve natural light. It marks the boundary but does not visually reduce the room as much as a solid wall.

In a study, a system of wooden posts is suitable for dividing the workspace from the library, sofa area, or meeting space. The spherical elements make the structure less office-like and more object-like.

In the hallway, a partition can gently separate the entrance from the main living area. Here, natural wood pairs especially well with cabinets, consoles, and doors.

KN-020 is also suitable for commercial interiors — restaurants, salons, showrooms, hotels, and offices. The geometric shape is neutral enough to be used both in a restrained modern space and in a more decorative composition.

KN-020 for an open wooden shelving unit

The second strong application direction is open shelving made of wooden posts and shelves.

A tall storage system, especially from floor to ceiling, occupies a significant wall area and inevitably becomes part of the interior design. If only straight verticals and horizontals are used, a large shelving unit can look too rigid.

KN-020 helps break up this regular grid.

The sphere can be installed:

• between two shelf levels;

• above the top shelf;

• in the central part of a separate stand;

• closer to the lower level;

• at several points on different verticals;

• together with figures of other geometry.

A particularly interesting result is obtained when the position of large elements is not repeated literally. For example, the first KN-020 is at the top of the shelving unit, the next one is closer to the middle, and another one is near the bottom shelf.

This creates a diagonal or free rhythm that ties the entire composition together.

An open shelving unit can be used for books, ceramics, vases, collectibles, and small works of art. In a commercial space, it is suitable for displaying products.

At the same time, geometric details become part of the shelving unit's design itself, so the structure looks complete even with a small number of items on the shelves.

Shelving unit partition with geometric elements

KN-020 is especially interesting in structures that simultaneously function as shelving and interior partitions.

Vertical wooden axes define the main geometry. Horizontal shelves form storage levels. Spheres, cubes, and elongated pieces add a decorative rhythm to the space.

Such a system can be placed along a wall or used as a partially open boundary between two zones.

For a studio, this could be dividing the sleeping and common areas. For a living room, it is a boundary between the lounge and dining areas. For a study, it is an open library that simultaneously separates the work area.

The large KN-020 works well within such a system precisely because of its clean spherical shape. It does not compete with items on the shelves and does not impose too specific a style, but it makes the wooden frame much more expressive.

Mounting size 34 mm

An important parameter of the model is the mounting size of 34 mm.

It must be taken into account when selecting mating elements and developing the future structure. KN-020 differs from a regular decorative wooden sphere in that it is intended for inclusion in a modular system.

Pre-drilled holes allow the shape to be used with the corresponding wooden construction set elements.

For a project, this provides a significant advantage. The designer knows in advance not only the external size of the sphere but also the mounting size. A carpenter or furniture maker can account for this parameter when preparing the overall scheme.

Before ordering, it is recommended to determine:

• the height of the future structure;

• the number of vertical axes;

• the step between them;

• the placement of shelves or horizontal elements;

• the number of KN-020;

• the height of placement for each ball;

• the combination with other geometric shapes.

This approach allows using decorative elements deliberately, rather than adding them after the main structure has been formed.

Geometric shape instead of a regular wooden blank

If a project requires a wooden ball with holes, a regular turned blank is not always convenient.

A simple sphere needs additional processing, calculating hole positions, and ensuring compatibility with other structural parts.

KN-020 is initially a component of a wooden construction set. Its dimensions and mounting size are already defined, and its shape can be combined with other parts of the same system.

This is especially convenient for projects that require several identical elements.

For example, when making a wide partition, KN-020 can be used in several repeating modules. When creating a series of shelving units, the same ball can become a common decorative feature of the entire collection.

In custom furniture, KN-020 allows you to achieve an expressive spherical part without the need to develop it separately.

KN-020 made of solid beech

Beech is suitable for projects where pure form and calm wood texture are the priority.

The beech KN-020 looks quite minimalist. The natural grain is present but does not distract from the geometry. This allows the large ball to pair well with other shapes and does not make a complex structure visually overloaded.

Beech is especially appropriate in:

• in modern light interiors;

• in Scandinavian style;

• Minimalism;

• in calm modern classics;

• in interiors with a natural neutral palette.

Light wood works well next to white, beige, and gray walls, natural textiles, stone, glass, and matte metal.

For a large partition, beech helps maintain a sense of lightness. Even if the structure spans from floor to ceiling, the natural light shade does not make it overly massive.

Beech is also suitable for projects that involve subsequent decorative finishing. Shapes, stands, and other elements can be brought to a unified visual solution.

KN-020 made of solid oak

Oak KN-020 has a more pronounced natural character.

On the spherical surface, the oak pattern reveals itself especially well. The fibers follow the rounded shape, and light and shadow further emphasize the wood's structure.

This option makes sense to choose when the natural material should be a noticeable part of the design.

Oak pairs well with:

• solid and veneered furniture;

• oak parquet;

• wooden doors;

• natural stone;

• decorative plaster;

• metal;

• glass.

Oak KN-020 can be used in a modern interior where laconic geometry combines with high-quality natural materials.

In a more classic setting, the sphere can serve as an alternative to traditional carved decor. The shape remains simple, but the texture of the solid wood adds expressiveness to the piece.

If you need to buy a wooden oak sphere for a partition or furniture stand, KN-020 allows you to use a ready-made element with fixed dimensions and a mounting size.

Clean spherical shape 104 × 104 × 104 mm

A feature of KN-020 is the same size in all three main directions:

A — 104 mm
B — 104 mm
C — 104 mm
D — 34 mm.

Thanks to this, the figure is perceived as a particularly clean and balanced rounded volume.

In an interior, such geometry is universal. The sphere reads equally well from different angles, which is important for open partitions and shelving that may be viewed not only from the front.

The size of about 10 cm makes KN-020 noticeable, but allows combining several such pieces in one large composition.

For a small furniture stand, one sphere is often enough. For a wide partition, you can use several, distributing them at different vertical levels.

How to combine KN-020 with wooden cubes

One of the most expressive combinations is a sphere and a cube.

KN-020 has a smooth continuous surface, while the cube is built on straight planes and angles. This makes the two maximally simple forms create a strong visual contrast.

In a shelving unit, the sphere can be placed on one post and the cube on the adjacent one. In a partition, several such elements can be alternated in width.

For example:

first post — KN-020;

second — a small cube;

third — an elongated geometric shape;

fourth — a smooth axis;

then the sequence repeats.

This module allows you to design even a very wide structure and avoid monotony.

You can also use a sphere and a cube on the same vertical axis, but it is advisable to leave enough space between the large shapes. The smooth part of the post creates the necessary visual pause.

Combination of KN-020 with elongated and conical elements

The round shape interacts well with conical, diamond-shaped, and elongated parts.

KN-020 creates a large static accent, while the elongated shape emphasizes the direction of the vertical axis.

This is especially useful in floor-to-ceiling structures. Alternating round and elongated volumes makes the eye move along the entire height of a partition or shelving unit.

At the same time, large shapes should not be placed too close to each other.

If every small section of the stand is filled with decor, the system's main advantage—lightness—will be lost. Smooth gaps should remain part of the pattern.

In the section elements of the STAVROS wooden construction set you can choose shapes of different sizes and forms to create your own sequence.

KN-020 for furniture stands and supports

The geometric shape is suitable for use in decorative furniture stands.

Instead of a complex turned support along the entire height, you can assemble a composition from a smooth wooden axis and several ready-made figures.

KN-020 in such a stand will serve as the main volumetric accent.

The solution is suitable for:

• shelving units;

• consoles;

• open shelving;

• decorative supports;

• display cases;

• designer furniture;

• interior stands.

If a minimalist option is needed, a single sphere is used. For a more decorative structure, KN-020 can be supplemented with a small figure of a different shape.

This approach gives the designer the ability to control proportions without complex ornamentation.

For designer and custom furniture

KN-020 is interesting for projects where furniture needs to be made recognizable through the shape of individual parts.

The spherical element can be repeated in several pieces of the same collection. For example, use it in the stand of an open shelving unit, the support of a console, and a decorative structure nearby.

Thanks to this, different pieces get a common motif and are perceived as a single series.

At the same time, it is not necessary to literally repeat the same placement. In one product, KN-020 can be at the top, in another — in the center, in a third — closer to the base.

This technique works especially well in furniture with laconic facades and simple planes. The large wooden sphere becomes the only complex shape and therefore looks particularly expressive.

For carpentry and furniture workshops

Using the ready-made KN-020 can also be convenient from a production point of view.

When implementing a project, the craftsman receives a part with clear external dimensions and a mounting parameter. There is no need to develop a spherical element from scratch each time.

This is useful when manufacturing:

• one complex partition;

• several identical posts;

• series of shelving units;

• designer furniture;

• decorative structures for commercial interiors.

At the same time, the finished module does not limit the design. The craftsman independently determines the number of figures, the distances between them, and their combination with other elements.

Thus, a standard part becomes part of a custom product.

KN-020 for designers and architects

For a designer, the ability to work with real dimensions in advance is important.

KN-020 can be included in a project not as a conventional "wooden sphere," but as a specific element measuring 104 × 104 × 104 mm with a mounting size of 34 mm.

This helps to correctly assess the scale.

In visualizations, a small difference in size may be almost imperceptible, but in a real interior, a geometric figure of about 10 cm is already a full-fledged volumetric accent.

Knowing the parameters in advance, you can calculate:

• mounting height;

• distance to the adjacent post;

• position relative to shelves;

• number of elements;

• overall rhythm of the composition.

This simplifies the transition from idea to production.

How to distribute KN-020 in a large partition

For a wide partition, you should not automatically install the same ball on each vertical.

It is much more interesting to create several types of posts.

For example:

Type 1 — large KN-020 at the top.

Type 2 — cubic shape in the center.

Type 3 — elongated element below the center.

Type 4 — smooth stand or small part.

Then this set repeats across the width of the structure.

Another option is free distribution, where the position of the balls gradually moves from top to bottom. This pattern creates a sense of movement.

For a strict interior, symmetry can be used: two or four KN-020s are placed mirror-symmetrically relative to the central axis.

The main thing is to determine the principle in advance. Then even a complex composition will be perceived as organized.

How many KN-020 balls to use

The quantity depends on the scale of the project.

In a small structure, one large sphere may be sufficient. If the space around it is free, KN-020 will be perceived as much more expressive than several figures placed too close together.

For a medium-width shelf, you can use several pieces and distribute them across different levels.

In a large partition, the quantity increases, but KN-020 still does not necessarily need to be installed on every post.

You also need to consider neighboring elements. If the project already has large cubes, cones, or other volumes, it is better to reduce the number of spheres.

This preserves the hierarchy: KN-020 remains one of the main accents rather than turning into a constantly repeating background.

Pre-assembly and composition check

Before final fixation of a complex system, it is useful to perform a pre-assembly.

It allows you to look at the real proportions and evaluate the placement of the figures not on a drawing, but at full scale.

It is worth checking:

• whether there is enough distance between large elements;

• do the balls conflict with the shelves;

• are the accents correctly distributed by height;

• do the different shapes combine well;

• does one part of the structure look overloaded;

• does the overall pattern match the original idea.

At this stage, the placement of individual figures can be adjusted without changing the overall concept.

Preliminary layout is especially useful for asymmetric structures, where the exact position of elements is determined not only by the dimensional grid, but also by visual balance.

«Prestige» sanding quality

For KN-020, the "Prestige" sanding quality is provided.

On a spherical surface, the quality of preparation is especially noticeable. Light smoothly distributes over the rounded shape, so carefully processed wood helps maintain a clean perception of the geometry.

The prepared element can be included in the overall finishing system of the project.

If you need to emphasize natural wood, solutions that preserve the texture of the solid wood are used. If the structure must match a specific color scheme of the interior, the finish can be selected together with the other details.

It is advisable to treat all elements of one partition or shelving unit in a unified system. This helps achieve a cohesive look for the posts, spheres, cubes, and shelves.

Why KN-020 suits a modern interior

Modern decorativeness is often built not on complex carving, but on form, scale, material, and rhythm.

KN-020 aligns well with this principle.

A sphere is one of the simplest geometric forms. But next to a thin straight post, it becomes an expressive volume. Natural wood adds texture, and the combination of several geometric elements creates a unique pattern.

Thanks to this, KN-020 can be used in a fairly minimalist interior without fear of excessive decorativeness.

The sphere looks good against a neutral background, next to stone, solid plaster, glass, metal, and simple furniture facades.

Buy wooden sphere KN-020 for a partition

The geometric figure KN-020 is suitable if you need to buy a wooden sphere for a partition, a decorative element for a post, or a large spherical part for an open shelving unit.

Unlike a regular wooden blank, KN-020 is considered part of a modular system. It has specific dimensions and a mounting parameter, so it is convenient to incorporate it into a project in advance.

The model can be used:

• in a decorative wooden partition;

• in an open shelving unit;

• in a shelving-partition;

• in a furniture stand;

• in custom furniture;

• in a spatial interior structure;

• together with other geometric elements made of solid wood.

The 104 mm size makes the sphere noticeable, but still allows using several such shapes in a large composition.

Buy KN-020 in beech or oak

The choice of material depends on the nature of the future product.

KN-020 in beech is worth choosing for a calm, light composition where pure form comes first.

KN-020 in oak is better suited for a project where it is important to emphasize the natural wood grain and match the figure with other oak elements.

When ordering several parts for one structure, it is advisable to choose one wood species for all main elements in advance. This makes the grain more cohesive and simplifies further finishing coordination.

If solid beech or oak is already used in the project, KN-020 can be selected in the corresponding finish.

Order KN-020 together with other constructor elements

For a complete composition, KN-020 is convenient to use together with other constructor elements made of solid wood.

First, the main vertical and horizontal lines are determined. Then points for large spheres are selected. After that, cubic, elongated, and more compact shapes are introduced into the composition.

This approach helps to obtain not a random set of decorations, but a well-thought-out geometric system.

For a modern interior, an asymmetric layout can be used. For a more strict one, repeating modules or mirror symmetry can be used.

KN-020 in both cases serves as one of the main volumetric accents.

Characteristics of the geometric figure KN-020

• Article number: KN-020.

• Product type: geometric figure, spherical element of a wooden construction set.

• Size A: 104 mm.

• Size B: 104 mm.

• Size C: 104 mm.

• Mounting size D: 34 mm.

• Material: beech or oak.

• Sanding quality: "Prestige".

• Application: decorative partitions, open shelving, furniture stands, designer furniture, and interior structures.

• Shape: large rounded element with prepared mounting holes.

Geometric figure KN-020 — wooden sphere for a custom interior structure

KN-020 — an expressive module for projects where a simple system of wooden posts needs to be complemented with a large but laconic geometric shape.

The size of 104 × 104 × 104 mm makes the shape clearly visible inside a partition or shelving unit. The mounting size of 34 mm allows KN-020 to be considered when developing the overall system, and the choice of beech or oak helps to match the product with other wooden interior details.

The sphere can be used as a single accent, repeated several times at different levels, or combined with cubes, cones, and elongated shapes. As a result, the same KN-020 is suitable for completely different solutions — from a calm symmetrical partition to a free-form designer shelving unit.

If you need to buy a wooden sphere with holes, order solid wood elements for a partition, select decorative details for a furniture post, or assemble a custom shelving unit from ready-made modules, KN-020 allows you to solve this task within a single system. STAVROS wooden construction set.