Article Contents:
- What is wooden trim: definition and essence
- Main types of wooden trim: from baseboards to molding
- Wood species: oak trim and beech trim
- Regional aspect: trim in St. Petersburg and trim in Moscow
- How to buy wooden trim without mistakes
- Wooden trim for doors and walls: examples of joints
- Installation and finishing work: how to work with wooden trim
- Final checklist for selecting and purchasing trim
- Where to buy wooden trim: manufacturers and regions
- Conclusion: STAVROS company — trim that won't disappoint
Trim — this word confuses many. Builders know it, designers use it freely, while an ordinary person starting a renovation looks at the price list and doesn't understand: what are trim items, how they differ from regular boards, why they are needed, and why the price is indicated per linear meter rather than per piece. Meanwhile,wood trim items— it is the foundation of any quality interior, seemingly invisible at first glance, but critically important. Baseboard, door casing, crown molding, molding, rail, skirting — all of this is trim. Without it, a room looks unfinished, raw, like a construction site, rather than a living space. Understanding what wooden trim is, how to choose it properly, wherebuy wooden trim— without overpaying or making mistakes — is saving time, money, and nerves.
What is wooden trim: definition and essence
Trimming Items— these are long-profiled, constant-section elements sold and measured in linear meters. The key word — 'constant section'. A two-meter baseboard has the same profile throughout its length: at the beginning, middle, and end, the cross-section is identical. This is not a board, which may have varying width and thickness along its length. This is not a block simply sawn to size. Trim is a profiled item, where the cross-sectional shape is designed for a specific function: to cover a joint, create a decorative relief, reinforce a structure, frame an opening.
— is measured in linear meters, but shipped as standard-length planks, which the buyer then cuts to their required dimensions.Wood TrimMeasured in linear meters, but shipped in standard-length planks that the buyer then cuts to their desired sizes.
Wooden trim is produced on special equipment — four-sided planers (four-sided planers) or milling machines with copying devices. The blank (a solid wood block) is fed into the machine, knives or cutters cut the material according to the specified profile, resulting in a profiled plank with precise dimensions and smooth surface. The profile can be simple (a rectangle with a bevel) or complex (multi-step relief with grooves, rounded edges, protrusions). The complexity of the profile affects the price — the more transitions, the slower the processing, the more expensive the item.
—Wooden trim— differs from MDF and plastic in material and properties. MDF trim — pressed wood fibers covered with film or veneer. It is cheaper than solid wood, does not crack or warp, but looks artificial, the film peels off, and the loose core is visible upon damage. Plastic trim (polyurethane, PVC) — even cheaper, does not fear moisture, but does not breathe, lacks natural texture, feels cold to the touch, and yellows over time. Solid wood — naturalness, warmth, elegance. Wood breathes, regulates humidity, smells, ages beautifully (if properly treated), and serves for decades.Buy wooden profiled products— is more expensive than MDF or plastic, but it is an investment in longevity and interior status.
Where are trim items applied? Everywhere where it is necessary to finish a joint, cover a gap, create a decorative element, reinforce a structure. Walls: moldings create panels, horizontal and vertical divisions, molding frames the upper part of the wall, rails form decorative screens. Ceiling: ceiling baseboard (cornice) covers the joint between ceiling and wall, beams (decorative or load-bearing) create relief. Doors: door casings frame the opening, door frame profile forms the door frame. Furniture: furniture trim (cornices, moldings, appliqués) decorates facades, creates relief, reinforces the structure. Floor: baseboard covers the joint between floor and wall, protects the wall from impacts, hides wires.Pogonazh iz massiva— it is a system of elements that transforms a bare room box into a finished interior.
Main types of wooden trim: from baseboards to molding
Wooden skirting boards— the most common type of trim. Baseboard covers the joint between floor and wall, hides the gap that is inevitable due to thermal expansion of flooring, protects the lower part of the wall from dirt, vacuum cleaner impacts, scratches.wooden baseboard— usually has a height of 60-120 mm, thickness of 16-20 mm, profile simple (with one rounded top) or complex (multi-step, with grooves).with a classic profile creates a sense of solidity, reliability.— is mounted with glue or self-tapping screws, joints at corners are made at 45 degrees, painted in the color of the floor or walls.
Wooden ceiling baseboard— (cornice) covers the joint between ceiling and wall, visually completes the room, adds ceiling height (if installed correctly).Ceiling baseboard woodenUsually has a profile with two mounting planes (to the ceiling and to the wall) and a decorative front part. Width from 40 to 150 mm; the higher the ceiling, the wider the trim can be.Wooden ceiling baseboardMounted with adhesive or hidden fasteners, joints are mitered at 45 degrees, often painted white.
CasingsThis is trim for framing door and window openings. A casing covers the gap between the door frame (or window frame) and the wall, hides mounting foam, and creates a decorative frame.Door TrimIncludes casings and door frame profile.trim for interior doorsTypically has a width of 60–90 mm, thickness of 10–18 mm, flat or relief profile. Casings are mitered at 45 or 90 degrees (depending on style), painted to match the door or contrasted.
layoutsThese are narrow profiled strips that cover joints between panels, divide surfaces, and create decorative frames.Wooden moldingHas a width of 10–30 mm, thickness of 5–10 mm, simple profile (bevel, rounded) or decorative (with groove, protrusion). Used in doors (to separate panels), in furniture (to frame fronts), in panels (to divide wall sections).Buy wooden trimSold by the linear meter, cut to required sizes.
moldingDecorative profiled trim with complex relief, used to frame mirrors, pictures, panels, and to create decorative elements on walls and ceilings.Batten trimHas a width from 20 to 100 mm, profile with multiple transitions — protrusions, recesses, rounded corners, bevels.Molded wooden trimOften painted with effects — patina, gilding, silvering.Wooden trimMore complex to manufacture than baseboard or casing, therefore more expensive.
trimNarrow trim for fixing glass in windows, doors, furniture facades.wooden trimHas a width of 10–15 mm, thickness of 5–8 mm, profile with bevel or rounded edge to avoid damaging glass. The strip is nailed with small nails or glued, pressing the glass against the frame.Buy wooden cleatMust be purchased with allowance, as some material is lost during cutting.
Wooden railsRectangular or square strips without complex profile, used to create decorative screens on walls, lattices, frames.Wooden plankHas a width from 20 to 100 mm, thickness from 10 to 40 mm, surface planed or sanded.wooden planks on the wallMounted vertically or horizontally, with gaps or flush, creating a textured surface.Wooden boards in interiorA popular trend in recent years, especially in Scandinavian and eco styles.
Wooden moldingsDecorative profiled strips for creating panels, frames, and dividing planes.wooden wall moldingsHave a width of 30–80 mm, thickness of 10–20 mm, profile from simple to complex.Decorative wooden moldingsUsed in classic interiors to create coffered panels, and in modern interiors for graphic wall divisions.Wooden molding for furnitureDecorates facades, creates relief, enhances the visual value of furniture.
Our factory also produces:
Wood species: oak trim and beech trim
oak trimThis is a premium choice. Oak is a hard, dense, durable wood with a distinct grain. Density 700–800 kg/m³, hardness by Brinell 3.7–4.0. Oak is not afraid of moisture (with proper treatment), does not deform, does not dry out critically, and lasts for decades. The oak grain features large pores, distinct annual rings, and contrasting transitions between early and late wood. This grain is visible even under paint, if the paint is semi-transparent. Under varnish or oil, the oak grain fully reveals itself, creating a rich, prestigious appearance.
Oak MoldingCosts 2–3 times more than trim from other species. This is due to the cost of raw material (oak grows slowly, wood is expensive), processing difficulty (oak is hard, quickly dulls tools), and prestige (oak is always associated with longevity and status). However, this premium is justified by durability and aesthetics.oak trim buyMakes sense for living rooms, offices, dining rooms — formal rooms where representation matters. For technical rooms (storage, closet), the premium is not justified.
Oak casingClassic choice for expensive doors. If the door is made of solid oak, the casing must be made of the same material, otherwise there will be a visual mismatch.Oak door trimPainted to match the door or left in natural color under oil/varnish.oak door casings for purchaseCan be purchased separately if the door is already installed but the casings do not fit.
oak lumberUsed for decorative wall screens where the oak texture will be visible and enhance the aesthetics.Decorative oak plankUsually left unstained, in its natural color, covered with oil or wax to highlight the texture.Interior oak plankThis is about naturalness, authenticity, eco-style.
Oak beamThis is not traditional trim (no profile), but a long product sold by the linear meter. Oak plank is used as support, as a frame, as decorative beam.Buy oak beamsAvailable in cross-sections from 30×30 mm to 100×100 mm, up to 3 meters long.
Beech skirting boardsThis is a balance of price and quality. Beech is a hardwood (density 650-750 kg/m³, hardness 3.8), almost matching oak in strength but significantly cheaper. Beech has a fine, uniform texture without prominent annual rings. The wood is light, pink-beige, and calm. Beech is easy to work with, provides a smooth surface, doesn't splinter, and doesn't chip. However, beech is more sensitive to humidity than oak — it may swell when wet and crack when drying. Therefore, beech requires stable humidity and is not suitable for humid rooms (bathrooms, kitchens without exhaust).
Buy beech trim30-50% cheaper than oak, but 2-3 times more expensive than pine. For living rooms with normal humidity (bedroom, living room, office), beech is an excellent choice. It is hard enough to not scratch, beautiful enough to not require paint coverage, and affordable enough to not break the budget.Beech door casingOften used with beech or ash doors, which are cheaper than oak but look decent.Buy beech casingAvailable ready for painting or already painted in standard colors.
Beech parquet— popular for board screens in modern interiors. Beech is light, uniform, does not distract with texture, creates a calm background.Beech parquet for saleAvailable in different widths (from 20 to 60 mm) and thicknesses (from 10 to 40 mm), can be installed with different gaps, creating different screen densities.Oak parquetPainted less often than pine — the wood itself is beautiful, and painting hides this beauty.
Oak timber beamUsed as support, as a mounting base for fasteners, as a frame. Beech is strong, holds screws better than pine, doesn't split.Beech beam for lathingAvailable in cross-sections from 30×30 to 80×80 mm, up to 2.5-3 meters long.
Oak veneerandBeech trimUsed in furniture and doors for dividing panels, framing inserts.Buy oak veneerorBeech strips for saleAvailable by the linear meter, cut to project dimensions.
Price comparison: pine — basic level, cheap, soft, easy to work with, but easily scratched, has resin pockets, uneven texture. Ash — mid-level, hard, with beautiful texture, but more expensive. Beech — mid to high level, hard, uniform, cheaper than oak. Oak — premium, hardest, most prestigious, most expensive. Durability comparison: pine — requires protection, easily damaged. Ash — durable, but may crack if improperly dried. Beech — durable under stable humidity, sensitive to moisture. Oak — most durable, withstands everything.
Get Consultation
Regional aspect: trim in St. Petersburg and trim in Moscow
buy wooden trim in SPBEasier than in most other Russian cities. St. Petersburg is a traditional woodworking center, with dozens of manufacturers, from small workshops to large factories. Competition is high, prices are lower than in regions, and the assortment is wider.Wooden trim SPBCan be purchased directly from the manufacturer, avoiding middleman markup. Many manufacturers have showrooms where you can see samples, touch, and compare profiles.Beech trim to buy in St. PetersburgDelivery to the site — standard service, delivery cost depends on volume and distance.
Molding SPBPrimarily made from northern wood — pine, spruce, birch. Oak and beech are imported (from Europe, the Caucasus, central Russia), so they are more expensive. However, processing quality in St. Petersburg is high — traditional woodworking, skilled craftsmen, modern equipment.Buy molding SPBAvailable as standard (catalog profiles) or non-standard (custom profile based on customer’s drawing, minimum order 50-100 linear meters).
Molding MoscowThe market is larger, competition is higher, but prices are also higher than in St. Petersburg (higher rental, salaries, logistics). Moscow has many resellers who purchase trim from regions (including St. Petersburg) and sell with markup. Therefore,Buy molding productsIn Moscow, it makes sense to either order from large federal manufacturers with their own Moscow warehouse, or order directly from St. Petersburg with delivery (if volume is large, delivery pays off with price savings). Moscow is a city wherePogonаж pricePrices vary by orders of magnitude for the same product depending on where it is purchased.
The climate of St. Petersburg and Moscow affects trim. Both capitals have high humidity (especially St. Petersburg), which is critical for wood. Wooden trim must be stored in a dry room; otherwise, it will absorb moisture, swell, and after installation, begin to dry out, creating gaps. The moisture content of trim at the time of sale should be 8-12% (kiln-dried). If trim was stored outdoors under a cover, moisture content may be 20-30%; such trim should not be purchased — after installation, it will dry out, warp, and gaps between boards will become critical.Buy oak trim in St. PetersburgorBuy oak trim in MoscowMust be purchased only from manufacturers with drying chambers and guaranteeing 8-12% moisture content.
Delivery of trim is a separate issue. Trim is long (boards up to 2-2.5 meters), fragile (easy to chip corners, scratch surface), requires careful packaging and transport. Large manufacturers package trim in stretch film, stack on pallets, and deliver by truck. Small sellers may hand over trim without packaging, and the buyer transports it themselves by personal vehicle, risking damage.Buy wooden skirting board in Moscoworwooden skirting buy in SPbBetter with delivery from the manufacturer — this guarantees that trim arrives intact.
— a request entered by thousands of people every month. But few understand what to look for when purchasing. First — moisture. The wood must be dried to 8-12% in a drying chamber. If the seller cannot provide a moisture meter certificate or refuses to measure moisture in front of you — this is a red flag. Wet trim after installation will shrink, gaps will appear, joints will spread apart, paint will crack. Dry trim, on the other hand, is stable — install and forget, it won’t change dimensions.
Buy molding productsSecond — geometry. Trim must be straight along its entire length, without bends or twist (along the axis). Take a board, look along it as along the barrel of a rifle. If curvature or an arc is visible — such trim is not worth buying, as it won’t lie flat during installation, gaps or waves will appear. Geometry is checked visually and by measurement: width and thickness must be identical along the entire length of the board with a tolerance of ±0.5 mm. If the variation is greater — it’s a defect or low-quality processing.
Third — grade. Wood is divided into grades based on the number and size of knots, cracks, resin pockets, and other defects. Grade "Extra" (or A) — no visible defects, uniform texture, ideal surface. Grade B — small knots (up to 10 mm) and minor tone differences are allowed. Grade C — large knots, resin pockets, contrasting texture. For trim under transparent finish (lacquer, oil) grade A or B is required. For trim under opaque paint, grade C is suitable — defects will be covered by paint.
It depends on the grade: "Extra" is 2-3 times more expensive than grade C.Pogonаж priceFourth — surface treatment. Trim is sold in three variants: un-sanded (after planing, with minor knife marks), machine-sanded (smooth, but may have sanding marks), hand-sanded (perfectly smooth, no marks). Un-sanded is cheaper, but requires additional sanding before painting. Machine-sanded — standard, suitable for most tasks. Hand-sanded — for furniture, where perfect smoothness is important.
Hand-sanded is better — saves time on preparation for painting.Buy wooden trimFifth — packaging and storage. Trim must be stored in a dry room, wrapped in stretch film or cardboard. If trim is lying outside, even under a canopy, it absorbs moisture and reaches 15-20% humidity within a week. Such trim should not be purchased. Check the seller’s storage location — if the warehouse is open, drafty, and unheated, it’s better to look for another seller.
Fifth — packaging and storage. Trim must be stored in a dry space, wrapped in stretch film or cardboard. If trim is left outdoors, even under a cover, it absorbs moisture and reaches 15–20% humidity within a week. Such trim should not be purchased. Check the seller’s storage location — if the warehouse is open, drafty, and unheated, it’s better to look for another seller.Buy wooden profiled productsIt is necessary for those who understand the importance of proper storage.
Trim for doors and walls: examples of joints
Door Trim— this is a system of elements that finishes the door opening. Basic joint: door frame (frame profile), door panel, casing, baseboard. Frame profile — this is trim of special shape with a quarter (projection), into which the door panel is inserted. Frame profile width is 70-100 mm, thickness 30-40 mm. The frame is assembled from three boards (two vertical, one horizontal on top), connected at right angles, and mounted to the wall.
— is selected so that all elements are made of the same wood species, in the same color, with compatible thicknesses.trim for interior doorsExample of a joint: door + casing + baseboard + molding. In a classic interior, the door is not only framed with casing, but also with additional molding around the opening. Molding is glued to the wall at a distance of 50-100 mm from the casing edge, creating an additional frame. Molding can be flat or with relief, painted in wall color or contrasting. Such finishing makes the opening more formal and grand.
— can be of different profiles, selected to match the interior style.Buy wooden moldingsWall trim — this is a system of moldings, panels, and boards creating wall panels, frames, and decorative elements. Classic wall panel: the lower part of the wall (up to 80-120 cm height) is covered with wood or cladding, and the upper part is limited by a horizontal molding (handrail). Molding has a width of 60-100 mm, a profile with an upper protrusion that protects the panel from impacts. Below the molding, the wall can be divided vertically by panels into rectangles, forming coffered sections. Panels are narrow (20-30 mm), creating a graphic grid.
Wall trim is a system of moldings, panels, and rails that create wall panels, frames, and decorative elements. A classic wall panel: the lower part of the wall (up to 80–120 cm height) is covered with wood or cladding, and the top is capped with a horizontal molding (handrail). The molding has a width of 60–100 mm, with a profile featuring an upper protrusion that protects the panel from impacts. Below the molding, the wall can be divided vertically by narrow panels (20–30 mm) into rectangles, forming coffered sections. These panels create a graphic grid.Wooden profiles— are selected as a unified system — all elements made of the same wood species, in the same color, with compatible thicknesses.
— are mounted vertically with gaps of 30-50 mm, creating a semi-transparent screen. Behind the boards, wiring, outlets, switches, and sound insulation can be hidden. Boards are attached to a furring strip (horizontal battens fixed to the wall) with screws or adhesive.wooden planks on the wall— must be of the same width (usually 40-60 mm) and thickness (20-30 mm), and length from floor to ceiling (usually non-standard, cut to order).Buy oak wooden planks for wallsMust be of uniform width (usually 40–60 mm) and thickness (20–30 mm), and length from floor to ceiling (usually non-standard, cut to order).
— frames the perimeter, moldings divide the surface, beams add volume. All of this — trim purchased by the meter, cut and installed according to the project.Ceiling skirting board made of wood, height 100-150 mm, enhances the perception of ceiling height.Installation and finishing work: how to work with wooden trim
Installing trim requires precision and care. First — measurements. Rooms are not perfect, angles are not always 90 degrees, walls are not always vertical. Before purchasing trim, measure all walls and angles, draw a plan, calculate trim with a 10-15% reserve for cuts and errors. Cut trim with a miter saw at required angles (usually 45 degrees for corner joints, 90 degrees for butt joints). Manual sawing gives an uneven cut, the support wobbles, gaps are inevitable. A miter saw cuts precisely, with a smooth cut, tight joints.
Trim attachment depends on type and installation location. Baseboards are attached with screws (into wall anchors) or adhesive (liquid nails). Screws are more reliable, but visible (heads are spackled and painted). Adhesive is faster, no heads, but holds worse, especially on uneven walls. Casing is attached with finish nails (thin nails without heads, driven with pneumatic nail gun, almost invisible) or adhesive. Moldings and panels on walls — only with adhesive, screws will spoil the appearance. Boards on walls — with screws to furring strips, screws are driven from the back, not visible.
Painting trim — before or after installation? It depends on the situation. Painting before installation gives a better finish (boards lie horizontally, paint doesn’t drip, easy to paint all sides), but the finish is damaged during installation (scratches from tools, chipping at ends), requiring touch-up. Painting after installation is simpler logistically (no need to paint in advance, dry, store painted trim), but more technically challenging (painting vertically, protecting walls and floor with painter’s tape, hard-to-reach areas are painted poorly). Compromise: primer and first coat before installation, finish coat after installation.
Trim joints in corners — the most difficult place. Internal corners (between two walls) are joined at 45 degrees: both ends are mitered at 45 degrees, boards meet to form a right angle. If the wall angle is not 90 degrees (which it almost never is), the miter is adjusted with a protractor: measure the actual angle, divide by two, miter to the resulting value. External corners (wall protrusion) are joined similarly, but mitered in the opposite direction. Joints are glued with carpenter’s glue, pressed tightly, excess glue wiped off. After glue dries, the joint is monolithic, no gaps.
Spackling and sanding — final preparation before painting. All visible screw heads, chips, and gaps are filled with wood putty (acrylic or epoxy). Putty is applied with a putty knife, smoothed, then sanded with fine sandpaper (grit 180-220) after drying. Dust after sanding is removed with a vacuum cleaner or damp cloth. Then primer is applied (strengthens wood, improves paint adhesion), after primer dries — paint or lacquer in two to three coats with inter-coat drying and sanding.
Spackling and sanding — final preparation before painting. All visible screw heads, chips, and gaps are filled with wood spackle (acrylic or epoxy). Spackle is applied with a putty knife, smoothed, then sanded with fine-grit sandpaper (180–220 grit) after drying. Dust from sanding is removed with a vacuum or damp cloth. Then a primer is applied (to strengthen the wood and improve paint adhesion), followed by paint or varnish in two to three coats with inter-coat drying and sanding.— is a multi-stage process requiring time and skill.— is a multi-stage process requiring time and skill.
Final checklist for selecting and purchasing molding
First step — measurements and calculation. Measure all walls where baseboards will be installed, all openings where casing will be installed, all areas where moldings or rails will be installed. Draw a plan with dimensions, calculate molding in meters, add 10-15% for cuts and possible errors. Note which profile is needed for each element (baseboard 80 mm high, casing 70 mm wide, rail 40×20 mm, etc.). This is the technical specification for purchase.
— for formal rooms (living room, office) chooseoak trim— suitable for residential rooms (bedroom, children's room) — a balance of price and quality.Beech skirting boards— for technical rooms (closet, storage) you can use pine — cheap, functional. Note that all molding elements in one room must be made of the same wood species — mixing oak and beech visually is unattractive, textures do not match.
— usually produced in a unified style, all elements match each other.Wooden profileFourth step — check quality before purchase. Visit the manufacturer's warehouse or store, inspect real planks, not just photos. Check moisture (ask to measure with a moisture meter, norm 8-12%), geometry (plank is straight, without bends or screws), grade (number of knots, uniformity of texture), surface finish (smooth, without scratches or fuzz). If anything is unsatisfactory — look for another seller.
Fourth step — quality check before purchase. Visit the manufacturer’s warehouse or store and inspect actual planks, not just photos. Check moisture content (request a moisture meter reading, normal range 8–12%), geometry (plank is straight, without bends or screws), grade (number of knots, texture uniformity), and surface finish (smooth, without scratches or fuzz). If anything doesn’t satisfy you — look for another seller.Buy trimmings— low-quality items — waste of money, time for redoing, ruined renovation result.
Fifth step — cost calculation.Pogonаж price— consists of: material price (wood species, grade), profile complexity (simple profiles are cheaper, complex ones are more expensive), order volume (bulk is cheaper), surface finish (un-sanded is cheaper, sanded is more expensive), delivery. Compare prices from several manufacturers, but do not choose the cheapest — low price often means low quality (raw wood, rough processing, low grade). Optimal choice — average or slightly above average price from a manufacturer with good reputation.
Sixth step — order with delivery. Order molding with a 10-15% reserve, specify delivery address, agree on timing. Check upon receipt: number of planks, length of each plank, absence of damage (scratches, chips, cracks), packaging (must be intact). If damage is found — prepare an act and request replacement. Store molding in a dry room, horizontally, on a flat surface, until installation. Do not leave molding outdoors, even under a canopy — it will absorb moisture and lose geometry.
Seventh step — installation or handing over to contractor. If installing yourself, prepare tools: circular saw, drill, level, tape measure, pencil, glue, screws, putty. If hiring an installer, ensure he has experience working with wooden molding (not plastic — different technologies). Discuss all joints in advance: how to join corners, how to fasten, what paint to use. Monitor the process, check each installed plank — flatness, tightness of joints, absence of gaps. If anything is wrong — request immediate redo, do not wait for completion.
— key quality factor. Buying directly from the manufacturer is cheaper than through intermediaries (no markup), more reliable (manufacturer guarantees quality), more convenient (can order non-standard profiles, non-standard lengths, custom coloring). Large manufacturers have modern equipment (CNC four-sided machines, drying chambers, sanding lines), which guarantees precise dimensions, low moisture, smooth surface. Small workshops can produce quality molding, but volumes are limited, delivery times are longer, prices are higher.
Manufacturer of trimBuying directly from the manufacturer is the key quality factor. It’s cheaper than through intermediaries (no markup), more reliable (manufacturer guarantees quality), and more convenient (can order non-standard profiles, non-standard lengths, custom coloring). Large manufacturers have modern equipment (CNC four-sided machines, drying chambers, sanding lines), which ensures precise dimensions, low moisture content, and smooth surfaces. Small workshops can produce quality trim, but volumes are limited, lead times are longer, and prices are higher.
ceiling baseboardsBaseboards, ceiling moldings, Casings, Moldings, rails, layouts, Furniture made of oak complements the interior picture, especially if the furniture is also made of solid oak. Unity of material and finish creates a sense of completeness and stylistic coherence., trim, strips, molding— Species: pine, spruce, oak, ash, beech, larch. Grade: from 'Extra' to C. Finish: un-sanded, machine-sanded, hand-sanded. Moisture: 8-12% (kiln-dried). Packaging: stretch film, damage protection. Delivery: to Saint Petersburg, Moscow, throughout Russia.
Buy molding in St. Petersburg— available in stock, shipped on the day of order or the next day.Wooden baseboard St. Petersburg— can be ordered in non-standard lengths (up to 3 meters), non-standard cross-sections (per customer's drawing), minimum order of 50 linear meters.Wooden planks SPBCan be ordered in non-standard lengths (up to 3 meters), non-standard cross-sections (per customer’s drawing), with a minimum order of 50 linear meters.
Buy molding in Moscow— popular profiles are available at the Moscow warehouse, non-standard profiles are ordered from production in St. Petersburg.Wooden skirting MoscowPopular profiles are available at the Moscow warehouse; non-standard profiles are ordered directly from the Saint Petersburg factory.Oak skirting boards SPBandOak skirting board in SPB for sale— directly from the manufacturer, avoiding intermediary markup.
Wooden metering — term denoting all long-form wooden items sold by the linear meter: skirting, casings, moldings, rails, trim, beadboard, stop, timber. "Metering" is a method of measurement and sale, where the unit of measurement is the linear meter (length of plank regardless of its width and thickness). If skirting costs 300 rubles per linear meter, a 2.5-meter plank costs 750 rubles. If trim costs 100 rubles per linear meter, you need 10 meters — cost 1000 rubles. Metering is convenient for long-form items, where each customer buys different quantities for a specific project.andwooden molding by the meter— terms used to describe molding sold by the meter, not individually.Beadboard can be purchased by the linear meter (hence the name), cut to required sizes for each specific object (a mirror frame 80×120 cm requires perimeter = 4 meters of beadboard, accounting for 45-degree corner cuts).— can be any length — from 1 meter to 3 meters, planks are cut to order.Buy wooden profiles, wooden wall profile, Beech strip profiles— all these requests lead to molding sold by the meter and cut to project dimensions.
Production of trim elements— complex technological process including wood drying, planing, profiling, sanding, quality control, packaging.molding productionguarantees dimensional accuracy (tolerance ±0.3 mm), low humidity (8-10%), smooth surface (without scratches, without fuzz), consistent quality from batch to batch. STAVROS —Manufacturer of trimwith 20 years of experience, proprietary technologies, and control at every stage.
Conclusion: STAVROS — trim that won’t let you down
Trimming Items— this is not a minor detail, it is the foundation of a finished interior. Without baseboards, a room looks unfinished. Without door casings, door openings look sloppy. Without moldings, walls appear bare.Wooden trimadds nobility, warmth, status. But only if it is quality — dry, flat, properly finished, made from good wood. Cheap raw trim will develop gaps, warp, and crack after half a year, requiring redoing. Quality trim lasts for decades, requires no repair, and ages gracefully.
Available in various cross-sections: from thin 20×10 mm to thick 100×40 mm, from different species (pine, beech, ash, oak), different processing (planed, machine-sanded, hand-sanded), different lengths (standard 2.5 meters, custom up to 3 meters).Wood Trimwith quality guarantee: humidity 8-12%, geometry with tolerance ±0.3 mm, grade from 'Extra' to C (customer’s choice), finish from un-sanded to hand-sanded, species from pine to oak. Over 200 profiles of various purposes are available:floor skirting boardsheight from 40 to 150 mm,Ceiling Moldingwidth from 30 to 120 mm,Door casings are an essential part of the trim system. Their profile must match the profiles of cornices and moldings. The width of the casing is usually 1.5–2 times wider than the wall molding. The wood species and color are identical to all other elements.width from 50 to 100 mm,decorative moldingswith profiles from simple to complex multi-step,railsof various cross-sections for louvered screens,layoutsnarrow and wide for doors and furniture.
Special attention is given toWooden Picture Frame— profiled trim with complex decorative relief, used for framing mirrors, pictures, and creating wall panels. STAVROS’ moldings are manufactured using 3D milling followed by manual sanding, ensuring sharp relief and smooth surface. The catalog features over 50 molding profiles — from simple ones with one rounded edge to complex ones with multi-level relief, width from 20 to 100 mm. Each profile is available in several species: beech (light, uniform, calm), oak (contrasting, expressive, status-oriented), ash (with distinct grain), pine (budget option for painting).
Furniture molding— a separate line: kitchen cabinet moldings, facade panels, profiles for louvered doors, glazing strips. All elements are manufactured with high precision, compatible with each other, forming a system where each part complements the other.Door moldingincludes profiles for door frames of various widths and configurations, flat and profiled casings, extensions for expanding frames in thick walls.
STAVROS’ production capacity allows manufacturing both standard profiles from the catalog and custom profiles according to the customer’s drawings. The minimum order quantity for non-standard profiles is 50 linear meters. Designers, architects, and furniture manufacturers benefit from a loyalty program with wholesale prices and priority manufacturing timelines. Private customers can purchase retail with self-pickup from warehouses in Saint Petersburg and Moscow or delivery throughout Russia and CIS countries.
Quality is certified by compliance certificates, long-standing experience (the company has been operating since 2005), thousands of completed projects — from private apartments to public buildings, hotels, and restaurants. Each batch of trim undergoes control of humidity, geometry, and cleanliness of finish. Planks are wrapped in stretch film, placed on pallets, and delivered with guaranteed integrity. Upon receiving the order, the client can inspect each plank, confirm the absence of defects, and request replacement if defects are found.
STAVROS showrooms in Saint Petersburg and Moscow are open for visits: here you can see samples of all profiles, touch different wood species, compare grades, and evaluate the quality of finish. Consultants will help select trim for a specific project, calculate the quantity considering angles and waste, suggest color or finish options. For complex projects, a technician can be dispatched to the site for measurements, specification drafting, and cost estimation.
buy wooden trimAt STAVROS — this is a choice in favor of quality, reliability, and longevity. This is trim that won’t dry out, warp, or develop gaps. Trim that will look the same ten years later as on the day of installation. Trim that makes interiors complete, noble, and status-oriented. This is an investment in the quality of life, in the beauty of space, in the pleasure of having every detail in its place and perfectly executed.
Contacts: phone 8 (800) 555-46-75, websitestavros.ruShowroom and warehouse addresses are listed on the website. Call, visit, choose — STAVROS will turn your project into reality, where every linear meter of trim contributes to the beauty and functionality of the interior.
