Buy Molding: Prices, Catalog, and Ordering Terms

Cost is the factor that determines the choice. No matter how much we talk about aesthetics, sophistication, atmosphere, ultimately the decision is made based on budget. How much does it cost to transform an interior? Is beauty accessible?buy stucco priceson which are reasonable — reality, not a marketing gimmick. Modern production technologies, the use of polyurethane instead of traditional plaster, and logistics optimization have made decor accessible to broad segments of the population.

Just twenty years ago, molding was associated with luxury, elite interiors, inaccessible to most. Plaster molding was handmade, cost a fortune, and installation required skilled craftsmen. Today, the picture has changed dramatically. Polyurethane molding is produced industrially, replicated, while the quality of detailing is not inferior to handcrafted work. Prices have dropped many times over, and installation has simplified to the level of a DIY enthusiast.

But cheapness does not mean low quality. On the contrary — modern materials surpass traditional ones in performance characteristics. Moisture resistance, strength, durability, ease of maintenance — polyurethane outperforms plaster in all parameters, while costing less. A paradox? Technological progress.

The market offers enormous variety. From the simplest smooth cornices for 200 rubles to luxurious Baroque rosettes for 25,000. How to navigate? What affects the cost? How to calculate a project budget? Let's break it down in detail.

Polyurethane Moldings NPU-400

from 18.20 $

Decorative molding KPU-016

from 94.86 $

Go to Catalog

Price Ranges: From Budget Solutions to Premium

Molding is a heterogeneous category. Within it, there are segments differing in price by tens of times. Understanding the market structure helps make an informed choice.

Watch video ...

Budget Segment

The most affordable option is polystyrene products. Cornices from 150 rubles per linear meter, baseboards from 100 rubles, moldings from 80 rubles. For a standard 20-square-meter room, 18 meters of cornice around the perimeter will be needed — totaling 2,700–3,600 rubles. An insignificant amount for a radical transformation.

Polystyrene is a foamed polymer, lightweight, easy to process. It can be cut with a knife, glued with liquid nails, and painted with water-based paint. An ideal material for those doing renovations themselves, without hiring crews. The drawback is fragility. Polystyrene crumbles upon impact, dents cannot be restored. Not suitable for high-traffic areas.

Typical prices for the budget segment:

• Simple ceiling cornices 50-80 mm — 150-350 rubles per 2 meters

• Floor skirting boards 60-100 mm — 120-280 rubles per 2 meters

• Wall moldings 30-60 mm — 80-200 rubles per 2 meters

• Rosettes with a diameter of 200-300 mm — 300-800 rubles

• Furniture overlays 50x50 mm — 50-150 rubles

The budget segment is aimed at the mass consumer. Typical apartments, dachas, rental housing — anywhere where price is important, not prestige. Visually, polystyrene is indistinguishable from polyurethane after painting. The main things are neat installation, thorough sealing of seams, and high-quality painting.

Our factory also produces:

Polyurethane molding NPU-412

from 129.51 $

Polyurethane molding NPU-413

from 160.42 $

Polyurethane molding NPU-416.4

from 114.43 $

View Full Product Catalog

Mid-Range Segment

Standard density polyurethane. Stronger than polystyrene, more durable, 40-60% more expensive. Cornices from 400 rubles per linear meter, moldings from 300 rubles, rosettes from 1200 rubles. For the same 20 m² room, 7200-9000 rubles will be needed for cornices.

Polyurethane is a two-component polymer, hard, dense, does not crumble. Withstands mechanical impacts, moisture-resistant, suitable for kitchens, bathrooms. Serves for decades without loss of properties. Installation is similar to polystyrene, but more powerful adhesive is required due to greater weight.

Typical prices for the mid-range segment:

• Classic ceiling cornices 80-150 mm — 500-1500 rubles per 2 meters

• Polyurethane floor skirting boards 80-120 mm — 400-900 rubles per 2 meters

• Moldings with ornament 50-100 mm — 300-800 rubles per 2 meters

• Rosettes with a diameter of 400-600 mm — 1200-3500 rubles

• Decorative overlays 100x100 mm — 250-600 rubles

The mid-range segment is the optimal balance of price and quality. Suitable for serious renovations where you plan to live long-term. The investment pays off with durability, eliminating the need for replacement after 5-7 years, as with polystyrene.

Premium segment

Elite stucco — high-density polyurethane, wood, composite materials. Complex ornaments, large sizes, exclusive designs. Cornices from 2000 rubles per meter, rosettes from 8000 rubles, wooden moldings from 1500 rubles.

This segment is aimed at design projects, elite interiors, restoration of historical buildings. Here, uniqueness, detailing, and material value are important. A carved wooden rosette made of solid oak with a diameter of 300 mm costs 15000-25000 rubles. A polyurethane Baroque cornice 250 mm wide with a rich ornament — 3500-5000 rubles per meter.

Typical prices for the premium segment:

• Baroque cornices 200-300 mm — 2500-5000 rubles per 2 meters

• Carved wooden moldings made of oak — 1500-4000 rubles per meter

• Rosettes with a diameter of 800-1200 mm — 8000-25000 rubles

• Columns, pilasters 2000-2500 mm — 15000-50000 rubles

• Exclusive carved wooden overlays — 2000-8000 rubles

The premium segment is not about saving, but about status, exclusivity, artistic value. Clients in this segment are willing to pay for uniqueness, handcrafted work, and natural materials.

Pricing factors: what determines the cost

Why does one rosette cost 500 rubles, and another — 20000? Let's examine the factors influencing the price.

Material

The basic factor. Polystyrene is the cheapest — low cost, simple technology. Polyurethane is 2-3 times more expensive — raw materials are more expensive, production is more complex, requiring high-precision equipment. Wood is 3-5 times more expensive than polyurethane — natural material, labor-intensive processing, manual labor.

Gypsum is a traditional material, rare today. 50-100% more expensive than polyurethane, while inferior in performance properties. Gypsum is fragile, afraid of moisture, heavy, and difficult to install. Used in restoration projects where historical authenticity is important.

Composites — mixtures of polyurethane with mineral fillers, imitating stone, marble. 30-50% more expensive than regular polyurethane, possess unique texture, prestigious appearance.

Size

Direct correlation. A 50 mm wide cornice costs 200 rubles per meter, while a 200 mm wide one costs 1500 rubles. A 200 mm diameter rosette costs 500 rubles, a 1000 mm diameter one costs 15000 rubles. The larger the element, the more material required, the more complex the production, and the higher the logistics costs.

Large elements require special molds, reinforced structures, and a long polymerization cycle. A meter-diameter rosette cannot be cast in an hour — it requires a day to set and special conditions. This increases the cost price.

Complexity of ornamentation

A smooth cornice without decoration costs 300 rubles, an ornamented one with floral motifs costs 1200 rubles. The difference lies in the complexity of the molds. Ornamented elements require expensive high-precision molds made from 3D models. A mold for a complex rosette costs 500,000-1,500,000 rubles and is only recouped with mass production runs.

The level of detail in the ornament affects the quality of the casting. Small elements — leaves, curls, flowers — require perfect polymer fluidity, precise temperature, and vacuuming to remove air bubbles. The defect rate is higher, and the cost price increases.

Manufacturer brand

European brands are 50-150% more expensive than Russian ones for comparable quality. The premium is for the name, marketing, and logistics from abroad. Russian manufacturers using European raw materials offer products of similar quality at a lower price.

Noname Chinese products are 30-40% cheaper than Russian ones, but the quality is inconsistent. There are excellent batches, but also outright defects — warping, bubbles, size discrepancies. Saving money is risky.

Order volume

Wholesale prices are 20-40% lower than retail prices. Ordering a set for an entire apartment gives you a discount. Many manufacturers offer a progressive scale — the larger the order, the lower the price per unit.

The retail price of a cornice is 800 rubles per meter. For orders over 100 meters — 550 rubles. For orders over 500 meters — 450 rubles. 100 meters is excessive for a private buyer, but for a designer working on several projects, the savings are substantial.

Region

Moscow and St. Petersburg are production centers, prices are lower. Remote regions have a 10-30% markup for delivery. The Far East — delivery can double the price. It is more cost-effective to order directly from the manufacturer with delivery by a transport company than to buy from a local store with a markup.

Product catalog: what the market offers

The range of moldings is enormous. Thousands of items, dozens of categories. Let's systematize the main ones.

Molding products

Trim— items sold by the linear meter. Cornices, moldings, baseboards, architraves. Standard rod length is 2 meters, less commonly 2.4 or 1.2 meters.

Ceiling cornices. Mounted at the junction of the wall and ceiling. Width from 30 to 300 mm. Profile smooth or ornamented. Prices — from 200 to 4000 rubles for 2 meters.

Floor baseboards. Finish the junction of the wall and floor. Height from 60 to 200 mm. Polyurethane, polystyrene, wooden. Prices — from 120 to 1500 rubles for 2 meters.

Wall moldings. Narrow decorative strips for walls, doors, furniture. Width from 20 to 150 mm. Prices — from 80 to 2500 rubles for 2 meters.

Door architraves. Framing for door openings. Width from 60 to 100 mm. Wooden, MDF, polyurethane. Prices — from 300 to 2000 rubles per set.

Individual pieces

Rosettes, overlays, brackets, corbels — items sold by the piece.

Ceiling rosettes. Diameter from 150 to 1500 mm. Prices — from 300 to 30000 rubles depending on diameter and ornament.

Decorative overlays. For walls, furniture, doors. Sizes from 30x30 to 400x400 mm. Prices — from 50 to 5000 rubles.

Brackets and corbels. Supporting elements for shelves, window sills. Sizes from 100 to 500 mm. Prices — from 300 to 4000 rubles.

Column capitals and bases. Upper and lower parts of columns. Diameter from 150 to 600 mm. Prices — from 2000 to 20000 rubles.

Architectural elements

Large volumetric structures.

Columns and half-columns. Height from 1500 to 3000 mm. Prices — from 8000 to 50000 rubles.

Pilasters. Flat vertical elements imitating columns. Height from 1000 to 2500 mm. Prices — from 4000 to 25000 rubles.

Domes. Hemispherical elements for ceilings. Diameter from 400 to 2000 mm. Prices — from 5000 to 60000 rubles.

Niches and frames. Ready-made kits for wall niche decoration. Sizes from 500x500 to 2000x2000 mm. Prices — from 8000 to 40000 rubles.

Wooden items

Solid Wood Items— premium segment.

Wooden moldings. Oak, beech, ash. Width from 40 to 120 mm. Prices — from 800 to 4000 rubles per meter.

Carved rosettes. Diameter from 50 to 400 mm. Hand-carved or machine-made. Prices — from 500 to 25000 rubles.

Cornices and baseboards. Solid oak, beech. Height from 80 to 150 mm. Prices — from 1200 to 3500 rubles per meter.

Balusters and railings. For stairs, balconies. Baluster height from 700 to 1000 mm. Prices — from 800 to 3000 rubles per piece.

Material comparison: polyurethane vs. plaster and wood

Traditional materials — plaster and wood — have served for centuries in creating moldings. Modern polyurethane has challenged them. Let's compare by key parameters.

Polyurethane wins in price, weight, moisture resistance, and ease of installation. It loses in prestige to natural materials. Optimal for most projects.

Plaster maintains its position in restoration, museums, and historical buildings. Authenticity matters there, not practicality. In modern interiors, it has been displaced by polyurethane.

Wood is the choice for elite interiors. Naturalness, unique texture, tactile sensations — advantages people are willing to pay for. But its application is limited — only dry rooms, requires maintenance.

Economic feasibility

Let's calculate the finishing budget for a 25 m² living room with a height of 2.7 m. Perimeter 20 m. Ceiling cornice, floor baseboard, chandelier rosette, wall moldings for zoning 10 m.

Polyurethane option:

• 100 mm cornice — 20 m x 300 rub/m = 6000 rubles

• 80 mm baseboard — 20 m x 200 rub/m = 4000 rubles

• 500 mm rosette — 2500 rubles

• 50 mm moldings — 10 m x 150 rub/m = 1500 rubles

• Total: 14,000 rubles

Plaster option:

• 100 mm cornice — 20 m x 600 rub/m = 12,000 rubles

• 80 mm baseboard — 20 m x 500 rub/m = 10,000 rubles

• 500 mm rosette — 8,000 rubles

• 50 mm moldings — 10 m x 400 rub/m = 4,000 rubles

• Total: 34,000 rubles

Wood option:

• 100 mm cornice — 20 m x 1,500 rub/m = 30,000 rubles

• 80 mm baseboard — 20 m x 1,000 rub/m = 20,000 rubles

• 300 mm rosette — 15,000 rubles

• 50 mm moldings — 10 m x 800 rub/m = 8,000 rubles

• Total: 73,000 rubles

The difference is colossal. Polyurethane is 2.4 times cheaper than plaster, 5.2 times cheaper than wood. With visual similarity after painting, the savings are obvious.

Discounts and special offers: how to save

Molding is a competitive market. Manufacturers compete for customers with discounts, promotions, and bonus programs. A savvy buyer saves 20-40%.

Seasonal sales

Construction season is spring-summer. Peak demand is April-June. Prices are highest during this time. Off-season is autumn-winter — the discount period. November-February, manufacturers reduce prices by 15-30% to stimulate demand.

Purchasing materials in winter for spring repairs saves significantly. The only condition is having storage space. Molding is bulky and requires a dry room.

Promotions and sales

Manufacturers regularly run promotions — discounts on specific items, sets, new products. Subscribing to newsletters gives you notifications about special offers.

Clearance of leftovers — discontinuing outdated models. Discounts reach 50%. If the design suits, savings are significant. Risk — limited quantity, cannot be purchased later. Precise calculation is needed.

Wholesale and small wholesale

Wholesale prices start from orders of 50-100 thousand rubles. For a private client it's a lot, but achievable for renovating a three-room apartment. Discount 15-25%.

Small wholesale — from 20 thousand rubles. Discount 10-15%. Realistic when purchasing materials for comprehensive renovation.

Cashback and bonuses

Some manufacturers implement bonus programs. A purchase of 50 thousand gives bonuses of 5 thousand, which can be used for the next order. Or 3-5% cashback to a bonus card.

Payment systems and bank cards offer cashback for purchases in construction stores. 1-2% is returned to the account. Small, but nice.

Self-pickup

Delivery costs 1,000-5,000 rubles depending on distance. Picking up yourself from the manufacturer's warehouse saves money. If you have transport and time, it's profitable.

Order conditions: minimum order quantity, delivery, payment

Buying molding is not like buying bread in a store. There are nuances affecting convenience and cost.

Minimum order quantity

Most manufacturers sell from 1 piece. A retail customer can order one rosette, two meters of cornice. This is convenient for minor repairs, replacement of a damaged element, or a trial purchase.

Some items, especially exclusive ones, are made to order from a minimum batch — 10, 50, 100 pieces. This is due to equipment setup and mold preparation. Not available to private customers, aimed at wholesalers and designers.

Wooden products often have a minimum order of 10-20 meters. Related to the setup of milling machines. Ordering 2 meters results in a 30-50% markup for small-scale production.

Production timelines

Stock program — popular items in stock, shipped on the day of order. 70-80% of the assortment is usually available.

Made to order — 5-15 business days. These are items produced in small batches once a week or month. The order is included in the nearest production cycle.

Custom manufacturing — 20-60 days. Creating a unique mold, design development, test casting, adjustments, final production. Expensive, time-consuming, but the result is exclusive.

Delivery

Within Moscow and St. Petersburg — manufacturers' own logistics. Cost 1000-2000 rubles for orders over 10000 rubles. Below that — pickup or additional payment.

Across Russia — transport companies. Delovye Linii, PEK, SDEK. Cost depends on weight, volume, and distance. On average 500-2000 rubles to major cities, 2000-5000 to remote regions.

Delivery of long goods is more expensive — 2-meter cornices do not fit in standard boxes, require special tariffs. It is more cost-effective to order in bulk, amortizing the delivery cost.

Fragility — a risk factor. Moldings are packed in film, cardboard, but transportation by a careless company risks damage. Choose reliable carriers, order cargo insurance.

Payment

Cash payment — upon pickup or courier delivery. Convenient, but limited to a 100 thousand ruble legal limit for legal entities.

Bank transfer — standard for online orders. Payment by invoice, online card payment. Instant, secure, with a receipt.

Installment plan — some stores offer 3-6 month interest-free installments. Convenient for large orders of 100-300 thousand rubles, spreads the financial load.

Prepayment 50-100% — standard for custom production orders. The manufacturer does not risk producing a non-standard item — the customer has already paid.

How to calculate the amount of material

A calculation error risks either shortage (buying more expensively, a different batch may differ in shade) or excess (money wasted, although leftovers can be returned within 14 days if packaging is intact).

Ceiling Cornices

Measure the room perimeter with a tape measure. A rectangular room 4x5 meters — perimeter 18 meters. Standard cornice rod length — 2 meters. Divide 18 by 2 — get 9 rods.

Corners require cutting at 45 degrees. Inexperience can lead to defects — spoiled pieces. Add a 10% margin — total 10 rods of 2 meters = 20 meters.

Complex configuration — bay windows, niches, protrusions — increases the number of corners and joints. Margin 15-20%.

Floor skirting boards

Similarly for cornices — room perimeter minus door opening widths. Room 4x5 with a door 0.9 m — perimeter 17.1 meters. Divide by 2 — 8.55 rods. Round up to 9, add 10% margin — total 10 rods.

Baseboards are joined at corners at 45 degrees or ready-made corner elements are used. Corner elements simplify installation but are more expensive. 4 internal corners in a rectangular room — 4 corner elements at 150-300 rubles each.

Wall Moldings

Depends on the design. Door framing — perimeter of the opening. Standard door 2x0.9 m — perimeter 5.8 m. Three rods of 2 m.

Coffers on the ceiling — complex calculation. Draw a diagram — how many rectangles, what sizes. Calculate the total length of all lines, add 15% for corners and margin.

Wall panel framing — panel height plus width, multiply by the number of panels, add 10%.

Rosettes

One under the chandelier in the center of the ceiling. If several light fixtures — several rosettes. In large rooms, decorative rosettes without light fixtures are sometimes installed — purely aesthetic.

Rosette diameter is chosen proportionally to the chandelier and room size. Chandelier diameter 60 cm — rosette 40-45 cm. Room 20 m² — rosette 50-70 cm.

Appliances

Depends on furniture and door design. One cabinet door — one overlay. Dresser with 4 drawers — 4 overlays. Calculate per piece, add 1-2 spares in case of defects.

Popular buyer questions

Can molding be returned if it doesn't fit?

Yes, within 14 days of receipt, if packaging is intact and there are no signs of installation. Refund minus delivery cost. Custom orders are non-returnable.

How to check quality upon receipt?

Inspect the packaging — dents and tears indicate possible damage. Open in the presence of the courier, examine the elements — absence of chips, cracks, bubbles, warping. Measure the length — permissible deviation ±2 mm per 2 meters.

Is delivery included in the price?

Usually not. Prices are indicated without delivery; it is calculated separately when placing the order depending on the address.

Can I order a custom design?

Yes, but the minimum order is from 50-100 pieces. The cost of mold development and production is 300,000-1,000,000 rubles. It pays off only with mass production.

How long does polyurethane molding last?

30-50 years with proper installation and use. Does not fade, crack, or deform.

Is special paint needed?

Any water-based or acrylic paint is suitable. Polyurethane holds the coating excellently. Oil-based and nitro paints are not recommended — they may cause deformation.

Is it difficult to install independently?

No. Basic skills — ability to cut, glue, apply putty. Instructions are available online; the process is intuitive. The main things are care and patience.

Does polyurethane differ visually from plaster?

Indistinguishable after painting. Unpainted polyurethane is matte white or beige; plaster is matte white. The texture is identical.

Can molding be painted gold?

Yes. Use acrylic paint with metallic pigment or imitation gold leaf — the thinnest sheets of gold imitation. The effect is luxurious.

Will molding withstand bathroom humidity?

Polyurethane — yes. Polystyrene — yes. Plaster — no. Wood — not recommended; requires treatment with moisture-protective compounds.

Conclusion

Price is no barrier to beauty.buy stucco pricesavailable at prices truly suitable for any budget. From modest 150 rubles per meter for polystyrene cornice to luxurious 5000 rubles per meter for Baroque polyurethane — the range allows everyone to find a solution.

Pricing is transparent. Material, size, complexity, brand — the factors are clear and predictable. The market is competitive; manufacturers vie for customers with quality and price, which benefits the buyer.

Polyurethane has democratized molding. What was once accessible only to the elite now adorns standard apartments. Technological progress has reduced costs, simplified production, while preserving aesthetics. Visually, polyurethane is indistinguishable from plaster; functionally, it surpasses it.

Saving on material does not mean saving on beauty. A well-informed choice allows creating a luxurious interior on a modest budget. Budget polystyrene in skilled hands transforms a room no worse than premium polyurethane. The main things are taste, care, harmony.

Discounts, promotions, wholesale prices provide additional opportunities for savings. Buying in winter, ordering as a set, choosing Russian manufacturers over imports — strategies that reduce costs by 20-40% without loss of quality.

Calculating the quantity is a critical step. A mistake costs money, time, and nerves. Measure carefully, add a margin, consult with sellers. Better to have a 10% surplus than a 5% shortage.

Order conditions are flexible. A minimum batch from 1 piece makes molding accessible for the smallest projects. Delivery across all of Russia expands geography. Payment by any convenient method simplifies the process.

Company STAVROS is a market leader in decorative elements. Own production, European raw materials, quality control at every stage — a guarantee of premium-level products at a reasonable price. An assortment of over 4000 items covers any design task.

Warehouse programs in Moscow and Saint Petersburg ensure instant shipment of popular items. Delivery across Russia and CIS — logistics are streamlined, deadlines are minimal. Professional consultations help choose optimal solutions, calculate quantities, select accessories.

STAVROS offers fair prices without markups.Decorative stucco, Ceiling Molding, floor skirting boards, ceiling rosettes, Decorative Inserts, Wooden moldings— the full spectrum of elements for creating interiors of any style and level.

A flexible discount system rewards regular customers and large orders. Promotions and special offers make purchases even more advantageous. A bonus program returns a portion of funds for future purchases.

Choosing STAVROS means choosing reliability, quality, professionalism. 24 years in the market, thousands of completed projects, impeccable reputation — the foundation of trust. Create dream interiors with confidence in materials, fair prices, quality service.

Molding is accessible to everyone. Don't postpone transforming your home by citing price. The modern market offers solutions for any budget. From a student's modest means to the unlimited possibilities of a successful entrepreneur — everyone will find products that match their finances and taste.

Beauty is not a luxury, but a necessity. The environment influences mood, productivity, and self-perception. Investing in interior design is an investment in quality of life. And with affordable prices for polyurethane molding, this investment is within everyone's reach.